Professional Documents
Culture Documents
Gland Selection
Gland Selection
A device designed to permit the entry of cable in to electrical equipment which provide sealing ,retention and earthing, bonding, grounding, insulation, strain relief or combination of all these. Gland should maintain overall integrity of enclosure in to which it is to be fitted.
Gland Selection
Gland should be selected on following Points 1. Type of Cable 2. Gland Size 3. Entry Type/Thread Specification of application 4. Ingress Protection required. 5. Material Type of Cable: Unarmored: Unarmored Cable will require outer seal within Gland to not only Provide ingress protection but also degree of retention. Armored: Gland that required clamping mechanism to terminate the armored both mechanically and electrically. The Gland will usually be required to provide ingress protection by sealing outer sheath and retention by clamping amour.
Type of Glands:
1. 2. 3. 4. 5. 6. Brass Indoor Type Gland Brass Outdoor Type Gland Brass Straitening Unarmored Cable Gland Brass Weather Proof Gland PG Threaded Gland: Industrial Type Gland
Cable Type: Steel Wire Amour. Amour Clamping: Two Part Amour Lock. This come in stunning high quality material for use in outdoor or indoor application with various types of cables sheathed or unsheathed. Brass indoor and outdoor gland popularly used with single wire armored. Plastic or rubber sheathed cable. Terminates and secure cable armoring and outer seal grips sheath of cable thus ensuring mechanical strength and earth continuity. CW brass glands are also supplied with integral earth facilities.
Application: a) Outdoor or indoor, for use with all type of SWA cables, plastic or rubber sheathed cable. b) Most suitable for SWA, plastic of rubber (Elastomeric) sheathed cables. c) Used in dry indoor conditions. d) No loose parts and easy to install. e) Save times & money. Gland size: 20 mm to 75 mm (S & L) Accessories :Earth Tag, PVC Shroud, Neo prime Rubber & LSF Rubber, PVC Washer, Brass Lock Nut. Cable Type: Wire Braid Armor. Armor Clamping: Three Parts (With Lock Nut). Nickel plated or natural brass type cable glands are used with variety of unarmored or rubber sheathed cables. Brass indoor and outdoor cable gland suitable for all types of unarmored cables, plastic or rubber sheathed cables.
Application: 1. For use with unarmored elastomeric and plastic insulated cables. 2. Indoor & Outdoor whenever it is required to provide sealing on cable outer sheath. Size : Metric - 20mm to 75mm (S/L) Accessories: Earth Tag, PVC Shroud, Neo prime Rubber & LSF Rubber, PVC Washer, Brass Lock Nut. Cable Type : Unarmored Unlike other types of cable glands, This type cable gland is used precisely with single armored various types of swa cables whether plastic or rubber sheathed ones. this type cable gland is known for its uninterrupted services once the gland is fixed to the desired wires and wire components. Suitable for SWA or rubber sheathed cables. Outer seal grips bedding layer of cable for use in most climatic conditions. Weather proof and water proof. Design has separate armor lock rings. Can be supplied with integral earth facility. Gland size: 20 mm to 75 mm (S & L)
Application : 1. Outdoor or indoor, for use with single armored, all type of SWA cable, plastic or rubber sheathed cable. 2. E1W Gland is Weatherproof & Waterproof Cable Gland Cable Type : Steel Wire Armour Armour Clamping: Three Part Armour Lock
Sealing Technique: Compression & Displacement Type Sealing Area(s): Inner & Outer Sheath Nickel chrome plated PG threaded cable gland is a custom made threaded gland to meet the needs from the meet industries. Apart from the round headed PG threaded cable gland, we also offer hexagonal gland or any other like spherical rectangular or any other dimensional PG threaded cable gland as per the specification of the customer.
5) PG Threaded Gland:
Cable Type: Wire Braid Armour Armour Clamping : Three Part (With Lock Nut) Sealing Technique: Compression Type. Brass gland suitable for steel tape armored, plastic or rubber sheathed cables. Terminates and secure cable armoring and outer seal grips sheath of cable thus ensuring mechanical strength and earth continuity. Recommended to use PVC shroud for additional ingress protection Cable Type : Steel Tape Armour Armour Clamping : Three Part (With Lock Nut) Sealing Technique: Compression Type.
5. Locate the detachable armor cone into the recess of the entry component. Pass cable through entry component evenly spacing the armor around the cone.
6. Whilst continuing to push the cable forward to maintain the armor in contact with the cone tighten the body of subassembly onto entry component.
8. Tighten the outer seal nut until either: i) The outer seal nut makes metal to metal contact with the gland body, or ii) The outer seal nut has clearly engaged the cable and cannot be further tightened without the use of excessive force by the installer. This completes the procedure for direct entry installation.
600 / 1000v stranded copper conductors pvc insulated with steel wire amour and PVC sheathed overall. (BS 6346 : 1997) Cable Size Conductor Nom. Area (mm2) 1.5 2.5 4 6 10 16 25 35 50 70 95 120 150 185 240 300 300 400 500 630 800 1000 Neutral 16 16 25 35 50 70 70 95 120 150 185 185 1 25 25 25 32 32 32 40 40 40 50S 50 50 63S 63 2 16 20S 20S 20 25 25 25 32 32 32 40 40 50S 50 50 63S 63 63 3 16 20S 20 20 25 25 32 32 32 40 40 50S 50 50 63S 63 63 75S 31/2 32 32 32 40 50S 50 50 63S 63 75S 75 75 4 20S 20S 20 20 25 25 32 40 40 40 50S 50 63S 63 75S 75 75 75 Numbers of Cores 5 20S 20S 20 7 20S 20 25 10 20 25 25 12 20 25 25 19 25 25 32 27 25 32 40 37 32 32 48 32 40 -
600 / 1000v stranded copper conductors xlpe/swa/pvc cable and PVC sheathed overall. (BS 5467 : 1989) Cable Size Conductor Nom. Area (mm2) 1.5 2.5 4 6 10 16 25 35 50 70 95 120 150 185 240 300 300 Neutral 16 16 25 35 50 70 70 95 120 150 185 1 25 25 25 32 32 32 40 40 40 2 20S 20S 20S 20 20 25 25 32 25 32 32 40 40 50S 50 63S 63S 3 20S 20S 20S 20 25 25 32 32 32 32 40 40 50S 50 63S 63 63 31/2 32 32 32 40 50S 50 50 63S 63 75S 75S 4 20S 20S 20 20 25 25 32 32 32 40 50S 50 50 63S 63 75S 75 Numbers of Cores 5 20S 20S 20 7 20S 20 25 10 20 25 25 12 25 25 25 19 25 32 32 27 32 32 40 37 32 40 40 48 32 40 50S -
185 -
50S 50 50 63S 63
63S -
75S -
75 -
75 -
Single Compression Heavy Duty as per IS12943 Cable Overload Diameter (mm) To Nipple Thread in (mm) From 9.0 12.0 12.0 15.0 16.0 20.0 24.0 28.0 33.0 37.5 43.0 49.0 55.0 61.0 67.0 73.0 79.0 84.5 93.0 101.0 12.0 15.0 15.0 18.0 20.0 24.0 28.0 32.0 37.0 42.0 48.0 54.0 60.0 66.0 72.0 78.0 84.0 92.0 100.0 115.0 16 x 1.5 16 x 1.5 20 x 1.5 20 x 1.5 25 x 1.5 25 x 1.5 32 x 1.5 40 x 1.5 40 x 1.5 50 x 1.5 50 x 1.5 63 x 1.5 63 x 1.5 75 x 1.5 75 x 1.5 82 x 1.5 90 x 1.5 100 x 1.5 110 x 1.5 125 x 1.5
ARMOUR CABLE (Single Compression Medium Duty) Cable Overload Diameter (mm) To Nipple Thread in (mm) From 6.0 9.0 12.0 14.0 16.0 18.0 21.5 26.0 31.0 34.0 38.0 42.0 48.0 54.0 60.0 9.0 12.0 14.0 16.0 18.0 21.5 26.0 31.0 34.0 38.0 42.0 48.0 54.0 60.0 66.0 3/8" 1/2" 5/8" 3/4" 7/8" 1" 1 1/8" 1 1/4" 1 3/8" 1 1/2" 1 3/4" 2" 2 1/4" 2 1/2" 2 3/4"
UN-ARMOUR CABLE (Double Compression Medium Duty) Cable Overload Diameter (mm) To Nipple Thread Size From 5.0 11.0 14.1 18.1 20.1 23.1 26.1 30.1 33.1 36.1 41.1 44.1 52.1 55.1 60.1 66.1 75.0 81.0 90.0 11.0 14.0 18.0 20.0 23.0 26.0 30.0 33.0 36.0 41.0 44.0 52.0 55.0 60.0 66.0 75.0 80.0 90.0 100.0 3/4" 3/4" 1" 1" 28 mm 1 1/4" 1 1/2" 1 1/2" 42 mm 2" 2" 2 1/2" 2 1/2" 70 mm 3" 3 1/4" 3 1/2" 4" 4 1/2"
ARMOUR CABLE (Double Compression Medium Duty) Cable Overload Diameter (mm) To Nipple Thread Size From 6.0 12.0 16.5 16.5 18.5 18.5 20.0 23.0 23.0 26.0 26.0 30.0 30.0 33.0 37.0 41.0 46.0 46.0 12.0 16.5 18.5 18.5 20.0 20.0 23.0 26.0 26.0 30.0 30.0 33.0 33.0 37.0 41.0 46.0 52.0 52.0 3/4" 3/4" 3/4" 1" 1" 3/4" 1" 1" 1 1/4" 1 1/4" 1 1/2" 1 1/2" 1 1/4" 1 1/2" 2" 2" 2" 2 1/2"