Professional Documents
Culture Documents
Reducer Resistance Coefficient Calculation
Reducer Resistance Coefficient Calculation
Reducer Resistance Coefficient 1.1 This spreadsheet calculates K resistance coefficient for different types of reducer based on formulas presented in Crane TP-410 and data published in different standards Saeid Rahimi M. 3-Sep-2011 www.chemwork.org 5 About Concentric Reducer Resistance Coefficient Calculation Eccentric Reducer Resistance Coefficient Calculation Conical Reducer Resistance Coefficient Calculation Concentric and Eccentric Reducer Standard Dimensions
Reference: Contraction, Expansion, Pressure Drop, Published on www.chemwork.org Flow of Fluids through Valves, Fittings and Pipe, TP-410M, 2010 Factory-Made Wrought buttwelding Fittings, ASME B16.9, 2007 Revision History : Version 1.0 1.1 Description of Changes Produced for personal library Modified for publishing on web Date 15-Aug-2011 3-Sep-2011
Contact: Please visit www.linkedin.com/groups/chemwork-3822450 should you have any comment, question or feedback or feel free to contact s.rahimi@gmail.com.
This spreadsheet is copyright 2011, The Chemwork Spreadsheet Page, www.chermwork.org. The information contained herein may not be retransmitted, copied, or electronically posted without the expressed written consent of its owner. You may use this spreadsheet for personal or professional use only.
S.Rahimi 0
mm mm mm %
88.9 26.7 89 65
Calculation Results Transition Length Diameter Ratio (Beta) Transition Angle () Transition Angle () Reducer K1 Expander Reducer K2 Expander mm ---Rad Deg ------------57.85 0.30 0.99 56.52 0.31 0.83 38.47 101.73 91.00 0.50 0.79 45.44 0.23 0.56 3.73 9.00
Notes
S.Rahimi 0
mm mm mm %
88.9 26.7 89 65
Calculation Results Transition Length Diameter Ratio (Beta) Transition Angle () Transition Angle () Reducer K1 Expander Reducer K2 Expander mm ---Rad Deg ------------57.85 0.30 0.82 47.08 0.39 0.83 47.84 101.73 91.00 0.50 0.70 39.94 0.39 0.94 6.16 15.02
Notes
S.Rahimi 0
mm mm mm %
88.9 26.7 89 98
Calculation Results Transition Length Diameter Ratio (Beta) Transition Angle () Transition Angle () Reducer K1 Expander Reducer K2 Expander mm ---Rad Deg ------------87.22 0.30 0.69 39.25 0.24 0.72 30.04 88.83 137.20 0.50 0.54 31.04 0.16 0.39 2.57 6.26
Notes