Professional Documents
Culture Documents
Ejectors 240 243 PDF
Ejectors 240 243 PDF
Ejectors 240 243 PDF
Ejectors
Syphons, Eductors, Exhausters & Injectors
Model Sizes Connections Body Material PMO Max. Operating Pressure TMO Max. Operating Temperature PMA Max. Allowable Pressure TMA Max. Allowable Temperature W-EJECT, W-ELL, W-LM 1/2 2 NPT Bronze (1/2 - 11/2) Cast Iron (2) 100 PSIG 130F 250 PSIG up to 450F 450F @ 250 PSIG
Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2010 Watson McDaniel Company
T Y P I C A L A P P L I C AT I O N S
Watson McDaniel Ejectors perform a variety of functions depending on the application and motive fluid (steam or water) used. See performance charts on the following pages. Applications include: exhausting, agitating, aerating, circulating, pumping and mixing.
W-EJECT
HOW IT WORKS
Using water, steam or air pressure as the motive force, ejectors operate on the principle that a high velocity flow through a nozzle will create a pressure drop in the area around the nozzle discharge. The resulting vacuum will induce flow into the secondary inlet of the ejector.
F E AT U R E S
I N S TA L L AT I O N
See installation examples on following page.
No moving parts Can be used with water or steam pressure Submersible Available in cast iron or bronze
SPECIALTY PRODUCTS
M AT E R I A L S
Body (1/2 - 11/2) Body (2) Nozzles (all sizes) Bronze Cast Iron Bronze
S A M P L E S P E C I F I C AT I O N
Ejectors shall be constructed from bronze or cast iron. Units shall be capable of using steam, water or air as a motive force.
240
428 Jones Boulevard Limerick Airport Business Center Pottstown PA 19464 Tel: 610-495-5131 Fax: 610-495-5134
www.watsonmcdaniel.com
S P E C I A LT Y P R O D U C T S
Ejectors
Syphons, Eductors, Exhausters & Injectors
W-EJECT
DIMENSIONS
Size 1/2 3/4 1 11/4 11/2 Bronze Body & Nozzles 1/2 3/4 1 11/4 11/2 1/2 3/4 1 11/4 11/2
inches
A 31/4 4 51/8 57/8 61/4 71/4 Dimensions B C 17/16 11/2 21/4 27/16 211/16 31/8 113/16 21/2 27/8 37/16 39/16 41/8 D 11/8 13/8 15/8 113/16 115/16 B 1 23/8 SECONDARY (S.) INLET (suction) C
FLOW
Connection Sizes * S. Inlet Discharge P. Inlet 1/4 3/8 1/2 3/4 3/4
DISCHARGE
W-ELL / W-LM
Bronze Body & Nozzles
NPT
DISCHARGE
DIMENSIONS
Size 3/4 1 11/4 S. Inlet 3/4 1 11/4
inches
Dimensions A 513/16 71/8 9 B 2 25/16 27/16 D 13/8 13/4 21/8
D
NPT
NPT
DISCHARGE HEAD
SPECIALTY PRODUCTS
TOTAL HEAD
SUCTION HEAD
It is always desirable to keep the Ejector as close to the actual liquid being pumped as possible. The maximum height the liquid can be pumped depends on the pressure of the motive liquid or steam available. Please refer to the capacity graphs for maximum flow rates and maximum achievable heads.
The maximum height that water or any liquid with a specific gravity of 1 can be lifted is 25 feet. Increases in the temperature of the liquid being lifted will cause this maximum height to decrease. Pumping liquids in excess of 130F is not recommended. Please consult factory with any specific application.
428 Jones Boulevard Limerick Airport Business Center Pottstown PA 19464 Tel: 610-495-5131 Fax: 610-495-5134
www.watsonmcdaniel.com
241
S P E C I A LT Y P R O D U C T S
Ejector Sizing
Example 1
A #14 1 Ejector using 60 lbs. of water pressure as a motive force will pump water to a maximum height of 40 ft. When pumping water to a height of 20 ft. using 60 lbs. of water pressure, the amount of water being pumped is 700 gal/hr.
Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2010 Watson McDaniel Company
Example 2
A #14 1 Ejector using 60 lbs. of steam pressure as a motive force will pump water to a maximum height of 60 ft. When pumping water to a height of 53 ft. using 60 lbs. of steam pressure, the amount of water being pumped is 650 gal/hr.
100
300
SPECIALTY PRODUCTS
80
0 0
20
100
120
600
0 0
20
100
120
242
428 Jones Boulevard Limerick Airport Business Center Pottstown PA 19464 Tel: 610-495-5131 Fax: 610-495-5134
www.watsonmcdaniel.com
S P E C I A LT Y P R O D U C T S
Ejector Sizing
4000 3200 Flow (gal/hr) 2400 1600 800 0 0 20 40 60 Total Head (Ft - H2O) 80 0 0 Flow (gal/hr) 1100
1000
20
100
120
2000
1000
0 0
20
100
120
SPECIALTY PRODUCTS
Flow (gal/hr)
Flow (gal/hr)
3000
2000
0 0
20
100
120
428 Jones Boulevard Limerick Airport Business Center Pottstown PA 19464 Tel: 610-495-5131 Fax: 610-495-5134
www.watsonmcdaniel.com
243