Professional Documents
Culture Documents
Belt Weighing Scale
Belt Weighing Scale
B U L K
W E I G H I N G
W E I G H I N G
SINGLE
S T R U C T U R E S
The SINGLE is a weighing frame with a single idler station for check weighing applications, with display of product throughput, comprising: a weighing unit with integral load cell an idler station (existing idlers may be utilised following modification) Suitable for 400 to 800 mm wide belt conveyors, conveyor speed: 2 m/s Maximum throughput: 200 t/h with small granular Accuracy: 2 to 3 %
FXVA
The FX is a weighing frame with a single idler station utilised in integrating belt scales designed for production weighing applications, comprising: two adjustable height weighing units with integral load cells a single idler station with special rollers for extremely low build-in height This new technology has enabled the design of a compact assembly with separate adjusting systems for height and trough angle to accommodate the belt conveyor.
FX
The compact assembly facilitates quick and easy installation using standard tools. Suitable for 400 to 1,800 mm wide belt conveyors, conveyor speed 2 m/s Maximum throughput: 2,000 t/h for all commodity types. Accuracy: 0,5 to 1 %
TAB
The TAB is a weighing frame comprising 2 or 3 idler stations utilised in integrating belt scales. They are suitable for process applications where high accuracy is required (weighing for trade purposes, class 1 - production control of low density commodities with a relatively low throughout one supporting frame with 4 columns, They consist of: each with an integral load cell one weighing table with 2 or 3 idler stations Suitable for 400 to 2,000 mm wide belt conveyors, speed: 2 m/s Maximum throughput: 6,000 t/h for all commodity types Accuracy: 0,2 to 0,5 %
D Y N A M I C
B U L K
W E I G H I N G
W E I G H I N G
BT
S T R U C T U R E S
The model BT comprises an entirely weighed belt conveyor connected to a supporting frame by two pivot points situated along the axis of the product supply line, with one pivot point mounted on 1 or 2 load cells. The model BT is used where the installation of a belt scale is not feasible, e.g. where the total conveyor length is less than 6 metres. Low capacity series for belt widths from 400 to 1,000 mm High capacity series for belt widths from 650 to 1,600 mm Mawimum throughput: 500 m3/h Maximum particle size: 40 mm
1 to 2 % for conveyor length of 1,800 mm 0,5 to 1 % for conveyor length of 3,000 mm 0,2 to 0,5 % for conveyor length of 4,500 mm Available for trade use (Class 1)
Accuracy:
VP
Model VP is an entirely weighed screw conveyor connected to a supporting frame by two pivot points situated along the axis of the product supply line, with one pivot point mounted on a single load cell. This model has been designed to handle powders and very dusty commodities in an enclosed system. Maximum throughput: 130 m3/h. Accuracy: 2 to 3 % Note : Models BT and VP require independent feed and discharge conveying systems.
MP
The model MP comprises a small belt conveyor mounted on a support structure incorporating a weighing idler with integral load cell. This model has been designed for low throughput applications for powder or granular commodities. Maximum throughput: 50 dm3/h to 20 m3/h, subject to model selected. Accuracy: 0,5 to 1 % Stainless steel and fully enclosed models available.
D Y N A M I C
B U L K
W E I G H I N G
W E I G H I N G
ROL 470 (single scale)
C O N T R O L L E R S
The ROL 470 is used for connection to a single belt scale and associated speedometer. It determines the instantaneous throughput weight of bulk commodities and displays the totalised weight. Operating parameters are easily set by means of a PC-type keyboard.
The ROL 461 is used for connection to a single belt scale and associated speedometer. It determines the instantaneous throughput weightt of bulk commodities, displays and records the totalised weight. Functions include:
WEIGHING PRE-SELECTION OF TARGET WEIGHT, THROUGHPUT, ETC. PRINTING COMMUNICATION WITH HOST DEVICES
Easy to program with user friendly, dialogue based menu.
The ROL 450 is a multi-scale dynamic weighing control system, comprising a data handling terminal TER 453 and an intelligent weighing module LOC 452 ou PSD 451. The TER 453 may be connected up to 31 scales for multiscale operation. The system processes the weighing data from each scale and totalises the individual throughput weights. Functions include:
TER 453
WEIGHING PRE-SELECTION OF TARGET WEIGHT, THROUGHPUT, ETC. PRODUCTION CONTROL PRINTING COMMUNICATION WITH HOST DEVICES
Easy to program with user friendly dialogue based menu. The alternative solution LOC 400 has an approval for trade use applications; the housing of the LOC 400 is sealed in accordance with the relevant type approval certificate.
LOC 452
PSD 451
D Y N A M I C
B U L K
W E I G H I N G
W E I G H I N G
Weighing structure
C O N T R O L L E R S
Speedometer Serial output 1 RS232 (RS 485 OPTION) Serial output 2 (RS232 or RS485 or ETHERNET OPTION)
230VAC
DISPLAY
F1 F2 F3 F4
7 8 9 4 5 6 1 2 3 . 0
Val
Nul
ROL 461
Throughput 50t/h
RAZ
Programmable inputs
Programmables outputs
Sppedometer
Weighing structure
Up to 31 modules
RS485 MODBUS/JBUS
230VAC
DISPLAY
ALI401
F1 F2 F3 F4
7 8 9 4 5 6 1 2 3 . 0
Val
Nul
TER 453
RAZ