Download as pdf or txt
Download as pdf or txt
You are on page 1of 26

Q2 2013 APAC Edition Your Gateway to Todays Leading Technology Products

IN THIS ISSUE:

DEVELOPMENT TOOLS Lattice Semiconductor DISPLAYS Kyocera

MEMORY ISSI MICROCONTROLLERS Microchip POWER MANAGEMENT Lattice Semiconductor Linear Technology Micrel

PROGRAMMABLE LOGIC Lattice Semiconductor POWER SUPPLIES Excelsys N2Power

Octo-Buck
1A

4A
Outputs Easily Paralleled
VIN 1 2 3 4 5 6 7 8 VIN

1A

2A
4A
1 2 3 4 5 6 7 8 VIN

4A 2A 1A 1A

1 2 3 4 5 6 7 8

1A

4A

1A

The LTC 3375 delivers a new level of design flexibility with its multiconfigurable 8-channel outputs. Up to four channels can be tied together for up to 4A of output current with a single inductor. 15 unique output rail combinations are possible, enabling late-stage power level adjustments. Each synchronous DC/DC converter can be powered and controlled independently. An on-chip die temperature sensor provides real-time thermal data for safe operation. Pushbutton control, power-on reset, watchdog timer and an I2C serial port provide flexible control and high reliability.

Features
8 Independent Synchronous Bucks Master-slave Configurable for up to 4A Output/Rail with 1 Inductor 15 Power Stage Configurations Independent VIN Supplies for Each Converter Precision Enable Pin Thresholds for Autonomous Sequencing (or I2C Control) On-Chip Die Temp Monitor QFN-48 Package (7mm x 7mm x 0.75mm)
Efficiency (%)
100 90 80 70 60 50 40

Buck Efficiency vs Load

Info & Free Samples


www.linear.com/product/LTC3375

SINGLE STAGE DUAL STAGE TRIPLE STAGE QUAD STAGE

1-800-4-LINEAR

30 Burst Mode OPERATION V = 3.3V 20 VIN = 1.8V OUT 10 fOSC = 2MHz L = 2.2H 0 1 10 100

www.linear.com/product/LTC3375
1000
, LT, LTC, LTM, Linear Technology, the Linear logo and Burst Mode are registered trademarks of Linear Technology Corporation. All other trademarks are the property of their respective owners.

Load Current (mA)

APPLICATION BRIEFS
Gennum / ISSI / Lattice Gennum / Lattice / Micrel / LTC Lattice / Micrel / N2Power
Nu Horizons Electronics is a leading distributor of advanced technology semiconductor, display, illumination and power solutions to a wide variety of commercial original services equipment providers manufacturers (OEMs) and electronic manufacturing (EMS). With sales facilities in 45 locations across North America and Asia and regional logistics centers throughout the globe, Nu Horizons partners with a limited number of best-in-class suppliers to provide in-depth product development, custom logistics and life-cycle support to its customers.

High Dynamic Range Security Camera Video Over Ethernet Aggregator Telehealth Aggregation Manager Industrial Ethernet Switch Secure Energy Meter and Controller Large Video Display

4 4 5 5 6 6

LTC LTC / Samsung / Semtech

DEVELOPMENT TOOLS
Lattice Semiconductor Lattice Semiconductor POWR1014A Breakout Board Evaluation Kit iCE40 Blink Evaluation Kits 7 7

FEATURED COMPONENTS
Displays Memory Power Management Power Management Power Management Power Management Programmable Logic Power Supplies Power Supplies Kyocera Advanced Wide View TFT-LCDs for Industrial Applications ISSI 4Gbit DDR3 and DDR3L / TRIAC Dimmable LED Driver IC Lattice Flash Corruption: Software Bug or Supply Voltage Fault? LTC Low Phase Noise, Dual Output Buffer/Driver/Logic Converter LTC Cable/Wire Drop Compensator Micrel High-Efficiency Buck Regulator SuperSwitcher II Lattice Cool FPGA Designs with Lattice Excelsys The Worlds Most Flexible Power Supply N2Power XL375 Series Power Supply Family 8 9 12 13 14 16-17 18 20 21

ADVERTISEMENTS
Linear Technology Microchip Microchip Linear Technology Samsung LED / Nu Horizons Octo-Buck eXtreme Low Power MCUs Maximize Battery Life The Most Popular 8-bit Microcontrollers 80V Sync Buck-Boost Innovative Lighting Solutions 2 10 11 15 19

Need more information right away?

Just use your smartphone to scan the barcodes throughout this publication and you'll link to more detailed information.
Note: You will need a QR Code Reader downloaded to your phone (i-nigma is free).

All registered trademarks displayed in this publication constitute the intellectual property of their respective holders. The technical information within this publication has been provided by Nu Horizons' suppliers. Nu Horizons does not assume any liability for its accuracy. Prices are subject to change without notice.

PO R TAL CONTENTS

High Dynamic Range Security Camera


AP P LI C ATI ON B R I EFS
Security cameras with high dynamic range provide dramatically better images in low light, bright light and when both bright and dim sections are present. This can improve facial recognition, and the visibility of key image elements like license plates. Using High Definition also contributes dramatically to visibility. Advanced image processing algorithms create the high dynamic range for high definition images. FPGAs with video Intellectual Property cores can provide the computing power required without the need for high performance MCUs or ASSP devices.

Image Sensor

Gennum Lace ECP3 FPGA GS2972 SerDes Tx


Power Over Cable

Gennum GS2971 SerDes Rx

ISSI LP DDR2
Baery Manager Baery

SPI

PoL Converter

Transmier Board

Receiver Board
Scan barcode to access application brief

Video Over Ethernet Aggregator


High Definition video is increasingly used in security and industrial settings to improve image quality when monitoring buildings and manufacturing processes. Multiple video streams can be aggregated prior to reaching the destination to minimize the installation of new SDI video cables. Using an installed Ethernet network as the aggregation destination is convenient and typically supports connection to archival storage as well as the command and control center. When some video processing is supported in the aggregator this can help reduce bandwidth requirements as well.
SDI Video Connector

Gennum GS2971 SerDes Rx Gennum GS2971 SerDes Rx


PoL Power

RJ45 Connector

Lattice ECP3 FPGA

RMII Micrel SPI KSZ8895 Ethernet Switch


RJ45 Connector

SDI Video Connector

AC Power
AC-DC Power

RJ45 Connector

Scan barcode to access application brief

Micron DDR3

RJ45 Connector

Nu Horizons offers a wide range of application notes and white papers. For more information, please visit www.nuhorizons.com/application_notes

Telehealth Aggregation Manager


AP P LI C ATI ON B R I EFS
With health care costs continuing to rise at dramatic rates one way to reduce costs is to minimize office visits. Some visits can be avoided by using Tele-health capabilities where more diagnostics measurements and consultation can take place in the patients home. A common element in a successful Tele-health system is an Aggregation Manager that collects a variety of diagnostic information and provides it to the health manager on an as needed basis. The aggregator must connect to the diagnostics equipment, store data, process data and send alerts if needed. .
Image Sensor

Conexant JPEG Encoder

SPI

I2C

Wireless Module

LCD

GPIO

Atmel I2C SAM4L MCU USB I2C

SEG Segment COM LCD


Microphone And Speaker

Atmel ATSHA204 Crypto Authentication


USB Connector

To Wireless Network

I2S

Diagnostic Devices

USB
LTC LTC4099 Battery Manager

Scan barcode to access application brief

Power

PoL Converter

Battery Pack

DC Power

Industrial Ethernet Switch


In complex manufacturing and chemical processing environments the need for high speed and reliable data communications is critical to reliable, safe and efficient operation. Complex industrial equipment also needs precise timing for reliable control. Industrial Ethernet is a key standard for robust and reliable communications even where transmission and reception are time critical and synchronization is required. A key element in an efficient industrial Ethernet system is switch with advanced features for robust communications.

Equipment Interface Amplifiers Isolation System AC Power

I2C GP IO SPI

Renesas RX210 MCU GPIO N2Power XL330-54

GP IO

Lattice

GP IO

Micrel KSZ84xx Ethernet Switch Board Power

Upstream Node
RJ45 Connector RJ45 Connector

I2C MachXO2 SPI

PoL Converter

Downstream Node
Scan barcode to access application brief

Nu Horizons offers a wide range of application notes and white papers. For more information, please visit www.nuhorizons.com/application_notes

Secure Energy Meter and Controller


AP P LI C ATI ON B R I EFS
The use of a wireless standard, like ZigBee, makes it easy to locate sensors and controllers anywhere within the building, simplifying the design and installation considerably. In many Smart Energy Monitor and Controller applications it can be important to secure data traffic within the wireless network to protect from snooping. The ability to control energy use could be attacked by a malicious intruder and energy delivery systems could be shut down or even severely damaged. Secure communications will be important to have in these types of systems.

Energy Source

LTC LTC2389 ADC

GPIO Atmel I2C ATmega2564 ZigBee MCU SPI

RF Signal To Central Control Atmel ATSHA204 Crypto Authentication

Actuators Indicators

Amplifiers AtoD Filters GPIO Drivers Isolation

Atmel SPI EEPROM AT25010B


Scan barcode to access application brief

System AC Power

AC-DC Power

PoL Converter

Large Video Display


Large video displays continue to be used to display information and advertising in any location where a multitude of viewers congregate or travel thru. A growing number of locations are making use of large displays to tailor advertising and informational messages to more accurately target the viewers shopping habits. For example, recent purchasing activity can be used to determine the most effective advertisement to generate synergistic sales. An energy efficient system to control the many LEDs used to illuminate the display is needed to control energy costs, improve reliability and system lifetime.

Samsung LEDs ooo Samsung LEDs Antenna


Scan barcode to access application brief

LHV LTC LED Driver LT3791 HTK Power Supply

System AC Power
PoL P oL PoL Co nverter Converter Converter

Board Power MCU


LCD Segment Display

SAW Filter

SemTech RF Transceiver

Nu Horizons offers a wide range of application notes and white papers. For more information, please visit www.nuhorizons.com/application_notes

POWR1014A Breakout Board Evaluation Kit


Lattice Breakout Board Evaluation Kits offer a convenient way to conduct hardware evaluations by providing easy hand-access to densely-spaced PLD I/Os. Because the center-to-center spacing of the package pins/balls of PLD modern packages can be 1.00 mm BSC (Basic Spacing between Spacing) or less, it can be very difficult to probe I/Os once a circuit board has been fabricated. The electrical traces of Lattice Breakout boards connect each I/O to header landings that have 100 mil (0.1 inch) centered holes. By adding test probes, jumper wires, or pin headers to the header landings, you can easily evaluate voltage monitors, high-voltage FET drivers, and open drain outputs of the POWR1014A.

D EVELOP MEN T TOOLS

Evaluation Kit Contents:


Preprogrammed with hardware test program Power Manager II POWR1014A-02TN48I LEDs Expansion Header Landings Prototyping Area USB Mini Jack Socket (Program/Power) JTAG Header Landing RoHS-compliant packaging and process USB connector cable

Scan barcode for more POWR1014A Breakout Board Evaluation Kit information

Order Number
POWR1014A-B-EVN

Price
$23.09

iCE40 Blink Evaluation Kits


A low-cost platform for evaluating and developing with the iCE40LP1K or iCE40HX1K mobileFPGA. The board provides access to general-purpose I/O and includes capacitive-touch buttons and LEDs. The board is powered and programmed via USB. An on-board microcontroller enables 2-way communication with the iCE40 mobileFPGA. The free iCEcube2 development tool controls programming, accesses virtual I/O functions, and runs the included demos. The tools can be downloaded from the Lattice website.

Key Board Features:


High-performance iCE40HX1K or low power iCE40LP1K mobileFPGA USB programming, debugging, virtual I/O functions, and power supply Four user LEDs Order Numbers Four capacitive-touch buttons 3.3 MHz clock source iCE40HX1K-BLINK-EVN iCE40LP1K-BLINK-EVN 1Mbit SPI serial configuration PROM Supported by Lattice iCEcube2 design software 68 LVCMOS/LVTTL (3.3V) digital I/O connections on 0.1 through-hole connections Supports third-party I/O expansion boards and modules, including 3.3V Arduino Shield boards (requires additional sockets, not supplied) Included in the Kit Scan barcode for more Lattice iCEblink40 HX1K Board iCE40 Blink Evaluation Kit information USB Mini Cable for power & programming QuickStart Guide
Nu Horizons offers a wide range of development / evaluation boards, tools and kits. For more information, please visit www.nuhorizons.com/development

Advanced Wide View (AWV) TFTLCDs for Industrial Applications


D I S P LAY S
Kyocera offers our new Advanced Wide Viewing TFT LCDs for the Industrial and Automotive markets, providing best-in-class performance, product quality, and long term support.

Display Division

Kyocera Display introduced 7 new TFT-LCDs to extend their product line for Industrial and Automotive display market. These new products feature Advanced Wide Viewing technology, Super High Brightness, and many other exciting features. Advanced Wide Viewing technology delivers true color and the best optical performance. It enables the individual to view images with vivid color (no grey inversion) from any angle. Designed with the latest high-efficiency, long-lifetime LED backlights, the new LCD panels achieve brightness levels as high as 1200 nits (cd/m2) and provide an ideal solution for a range of applications including medical, gaming, POS, ATM and any outdoor applications requiring wide viewing angles with sunlight readability. The LED driver circuit is integrated into the LCD module, with full dimming function. The backlight itself is specially designed to provide lower power consumption by using the latest technology for LED chips and light guides. The new TFT-LCDs are designed with standard LVDS interface, and offer a wide operating temperature range of -30 to 80 C. Kyocera offers long term product availability, which distinguishes the company as a preferred and reliable supplier for industrial, automotive and medical customers.

FEATURES:
Wide Viewing angles of 85/85/85/85 High brightness up to 1200cd/m2 High contrast ratio up to 1000:1 Long LED lifetime of 75K hours to half life By-passable LED driver built-in Wide operating temperature range of -30 to 80 C
T-55785GD070JLW-ABN Size Resolution Brightness Viewing Angle (U/D/L/R) Contrast Ratio Interface Operating temp LED driver Production Sample 7.0 800 x 480 1000nits 85/85/85/85 500:1 LVDS -30 ~ 80 C Built-in April 2013 Now T-55786GD084JLW-AAN 8.4 800x 600 600nits 85/85/85/85 500:1 LVDS -30 ~ 80 C Built-in April 2013 Now

BENEFITS:
Deliver the best in class optical performance Vivid color (no grey inversion) Sunlight readable for outdoor applications Standard LVDS interface Long product life support

APPLICATIONS:
Medical POS and ATM Human Machine Interface Outdoor applications Automotive applications

T-55786GD084JLW-ACN 8.4 800 x 600 1200nits 85/85/85/85 500:1 LVDS -30 ~ 80 C Built-in April 2013 Now

T-55787GD104JLW-AAN 10.4 800 x 600 700nits 85/85/85/85 1000:1 LVDS -30 ~ 80 C Built-in April 2013 Now

T-55787GD104JLW-ACN 10.4 800x 600 1200nits 85/85/85/85 1000:1 LVDS -30 ~ 80 C Built-in April 2013 Now

T-55788GD121JLW-AAN 12.1 800x600 600nits 85/85/85/85 850:1 LVDS -30 ~ 80 C Built-in April 2013 Now

T-55788GD121JLW-ACN 12.1 800 x 600 1200nits 85/85/85/85 850:1 LVDS -30 ~ 80 C Built-in April 2013 Now

Scan barcode for more TFT-LCD information

For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal

4Gbit DDR3 AND DDR3L NOW HERE


With one of the broadest offerings of DRAM products in the industry, we can offer a high-quality solution for a variety of applications. ISSIs standard ow includes 100% burn-in, hot, and cold temperature testing. Our commitment to long-term support of DRAMs products makes them ideal in automotive, industrial, medical, and communications, where longevity is key. The ISSI DRAM portfolio includes EDO/FP, SDR, DDR, DDR2, mobile SDR, mobile DDR, RLDRAM2/3 Memory, and now DDR3.
Contact us at DRAM @ issi.com

Density 1Gbit 2Gbit 4Gbit

Org. 64Mx16 128Mx8 128Mx16 256Mx8 256Mx16 512Mx8

Speeds (MT/s) 1066, 1333, 1600, 1866 1066, 1333, 1600, 1866 1066, 1333, 1600, 1866

Package 96-ball BGA 78-ball BGA 96-ball BGA 78-ball BGA 96-ball BGA 78-ball BGA

Voltage 1.5V (DDR3) 1.35V (DDR3L) Commercial

Temp Range Industrial Automotive (A1, A2)

Status Production Production Production Production Samples Samples

Automotive, A1: -40C to 95C; Automotive, A2: -40C to 105C MT/s: millions of bit transfers per second (per data line)

TRIAC DIMMABLE LED DRIVER IC

FOR RETROFIT LIGHT BULBS


IS31LT3935 is an advanced TRIAC dimmable LED driver with AccuDimTM technology which mimics an incandescent light bulb for true dimming performance with near 100% dimmer compatibility at a high Power Factor. Features: Single stage LED controller that enables 120V/230V AC lamp applications with high efciency (up to 87%) Near unity power factor like an incandescent lamp Near 100 percent compatibility with leading edge, trailing edge and digital TRIAC dimmers Reference designs targeting a specic range such as 100V-120V or 220V-240V AC input voltages up to a 25W power level
Contact us at analog @ issi.com Visit us at http://www.issi.com/US/dram-portal-magazine.html http://www.issi.com/US/analog-portal-magazine.html

Flicker- FreeTM
AccuDim Technolo

eXtreme Low Power MCUs Maximize Battery Life PIC MCUs with nanoWatt XLP

Extend the battery life in your application using PIC MCUs with nanoWatt XLP Technology and get the industrys lowest currents for Active and Sleep modes.
Low Sleep Currents with Flexible Wake-up Sources Sleep current down to 9 nA Brown-out Reset down to 45 nA Real Time Clock down to 400 nA Low Dynamic Currents As low as 45 uA/MHz Power efficient execution Battery Friendly Features Enable battery lifetime > 20 years Operates down to 1.8V with self write and analog functions Low-power supervisors for safe operation (BOR, WDT) Flexible Peripheral Set Integrated USB, LCD, RTC & touch sensing Eliminates costly external components Large Portfolio of Over 145 XLP MCUs 8 pin to 100 pin options 4 KB to 128 KB Flash

GET THE MOST FROM YOUR BATTERY IN YOUR NEXT DESIGN!


1. Visit www.microchip.com/XLP 2. View the Low Power Comparison videos 3. Download the Low Power Tips n Tricks 4. Use the Battery Life Estimator Tool

XLP 8-bit Development Board (DM240313)

The Microchip name and logo, the Microchip logo, dsPIC, MPLAB and PIC are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. All other trademarks are the property of their registered owners. 2012 Microchip Technology Inc. All rights reserved. 03/12

The Most Popular 8-bit Microcontrollers

See what makes Microchip the most popular choice for embedded designers: Broad portfolio of more than 325 8-bit PIC microcontrollers Easy migration with pin and code compatibility Industrys lowest active and sleep power consumption Integrated peripherals for USB, CAN and Ethernet with free software Interface to the world with LCD drivers and capacitive touch Continuous innovation with 70 new 8-bit MCUs in the last twoyears MPLAB IDE is free, and supports ALL of Microchips microcontrollers Low-cost development tools help speed up prototyping e orts Comprehensive technical documentation, app notes and code examples World-class 24/7 technical support and training

GET STARTED IN 3 EASY STEPS


1. Purchase the XLP 8-bit Development Board 2. Download free MPLAB IDE 3. Order samples and start designing! www.microchip.com/8bit

XLP 8-bit Development Board (DM240313)

The Microchip name and logo, the Microchip logo, dsPIC, MPLAB and PIC are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. All other trademarks are the property of their registered owners. 2012 Microchip Technology Inc. All rights reserved. 3/12

P OWER MAN AG EMEN T

n Example Bug or Supply Voltage Fault?


Answer: Both! Sequencing, Monitoring,
12V Q1

ns Flash Corruption: Software


Ch C2 3.3V Q3 Q2 D2

p + Power Feed

Reset Generation, Triming & Margining Flash memory is commonly used to store firmware in embedded systems. Occasionally,

the firmware stored in the Flash DC-DC 1 memory in some systems V1 is accidentally corrupted, preventing
2 power-on. Flash corruption V2 the system from booting DC-DC up after is commonly associated with a DC-DC 3 V3 software bug. However, it is also commonly understood that the probability of Flash corruption
S_Dn

C_Pmp

increases either during power cycling tests or during margining tests. The Flash corruption problem tends 5V to be more severe when the number of complex ASICs or SOCs used on the board increases. Lattice has released a new white paper that examines Flash corruption and its causes beyond a software bug, and suggests methods to minimize the corruption.
CPU Rst

Contact II your Nu Horizons FAE today for the white paper, and presentation of the solution! Alert_b Power Manager Brown_Out POWR1220AT8 Other_Resets POWER MANAGER II A SUPERIOR SOLUTION: KEY FEATURES AND BENEFITS: Cost Savings Through Integration Significantly reduce cost per function by integrating hotswap controller, ORing controller, power feed, sequencing controller, reset generator, voltage/current measurement and trimming and Voltage and Current Monitoring Features margining functions Increased Reliability Programmable thresholds with an accuracy of 0.2% (typ.), detects Supervise every supply faults on any rail (up t o 12) in less t han 64s, monitors voltages down to 0.67V immune to ground voltage differences due to 0.2% accuracy (typ.) differential sensing. Differential measurement Respond to events in <65s Reduced component count Supply Sequencing Features Power management algorithm is ruggedized through simulation Completely programmable power up and power down sequencing, Reduced Risk shutdown sequencing upon event driven sequencing, Device configuration stored infault, on-chip non-volatile memory programmable thresholds, time periods. Change trip points, timing and sequencing without board re-spins Use JTAG to make updates after assembly Power management algorithm is implemented using software Up to 12 Differential Voltage Sensors for Monitoring
Immune to noise on ground plane Improved monitoring and measurement accuracy Power supply voltage trimming to within 1%

Shut_Dn

V_Sens12V

En_V1_b

En_V2_b

Trim_V3

En_V3_b

V1_Mon

V2_Mon

V3_Mon

ard insertion short circuit te card upon

Dual, Precision Programmable Comparator per Input


Reliable board operation and fast fault detection Over-voltage, under-voltage and window ags

Ruggedized CPLD with Up to 48 Macrocells for Sequencing and Supervisory Signal Logic
Large operating power supply range (3.3V + 20% to 3.3V - 15%) High glitch immunity Efficient logic implementation Able to integrate multiple power management functions

short circuit fault.

Up to 4 High-Voltage MOSFET Driver Outputs


Provide power supply ramp rate control Implement hot swap, ORing and power feed functions

tal Cost KU)


RELATIVE COST

Hot-Swap Control Power Supply ORing Power Feed Supply Sequencing Voltage Monitoring Trim/Margining Watchdog Timer TRADITIONAL

0%

6%

Reduction in BOM Cost

50%

Up to

Voltage Measurement with 10-bit ADC through I2C


Used for digital closed loop trimming

Up to 8 On-chip DACs for Margining and Trimming


Convenient supply trimming/margining control Increase output voltage accuracy to 1%

3%

1%

I2C Bus Interface


Control power supply sequence

7%

3%

Power Manager II
NEW

Measure voltage through ADC Closed loop power supply control via DAC

0%

32-Pin QFN, 48-Pin TQFP, 100-Pin TQFP Industrial Temperature JTAG In-System Programmable with Non-Volatile E2CMOS Configuration Storage

0%

Scan barcode for more Power Manager II information

18 12

For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal

LTC6957 - Low Phase Noise, Dual Output Buffer/Driver/Logic Converter


Dual Output Sine Wave to Logic Converter Utilizes Selectable Input Filtering for Lowest Additive Jitter
The LTC6957-1/LTC6957-2/LTC6957-3/LTC6957-4 is a family of very low phase noise, dual output AC signal buffer/driver/logic level translators. The input signal can be a sine wave or any logic level (2VP-P). There are four members of the family that differ in their output logic signal type as follows: LTC6957-1: LVPECL Logic Outputs LTC6957-2: LVDS Logic Outputs LTC6957-3: CMOS Logic, In-Phase Outputs LTC6957-4: CMOS Logic, Complementary Outputs The LTC6957 will buffer and distribute any logic signal with minimal additive noise, however, the part really excels at translating sine wave signals to logic levels. The early amplifier stages have selectable lowpass filtering to minimize the noise while still amplifying the signal to increase its slew rate. This input stage filtering/noise limiting is especially helpful in delivering the lowest possible phase noise signal with slow slewing input signals such as a typical 10MHz sine wave system reference.

P OWER MAN AG EMEN T

FEATURES:
Low Phase Noise Buffer/Driver Optimized Conversion of Sine Wave Signals to Logic Levels Three Logic Output Types Available LVPECL LVDS CMOS Additive Jitter 45fsRMS (LTC6957-1) Frequency Range Up to 300MHz 3.15V to 3.45V Supply Operation Low Skew 3ps Typical Fully Specified from 40C to 125C
3.3V 0.1F

APPLICATIONS:
System Reference Frequency Distribution High Speed ADC, DAC, DDS Clock Driver Military and Secure Radio Low Noise Timing Trigger Broadband Wireless Transceiver High Speed Data Acquisition Medical Imaging Test and Measurement

Additive Phase Noise at 100MHz


140 SD1 OUT1 TO PLL CHIPS OR SYSTEM SAMPLING CLOCKS PHASE NOISE (dBc/Hz) SINGLE-ENDED SINE WAVE INPUT AT +7dBm (500mVRMS) FILTA = FILTB = GND LTC6957-2 (LVDS) Phase Noise at 100MHz

12-Lead MSOP and 3mm 3mm DFN Packages


FILTA 100MHz +7dBm SINE WAVE 50 100MHz +7dBm SINE WAVE 50 10nF 3.3V FILTB 0.1F 10nF IN+ IN FILTA 10nF FILTB IN+ IN OUT2 V+ SD1 OUT1 GND SD2 TO PLL CHIPS OR SYSTEM SAMPLING CLOCKS PHASE NOISE (dBc/Hz) OUT2 V+

145

Additive 150
155

OCXO

140

145 160 150

LTC6957-4 (CMOS) SINGLE-ENDED SINE WAVE INPUT AT +7dBm (500mVRMS) FILTA = FILTB = GND LTC6957-3 LTC6957-2 (LVDS) (CMOS) LTC6957-1 (LVPECL) LTC6957-4 (CMOS) 1k 10k 100k OFFSET FREQUENCY (Hz) 1M

10nF

OCXO

165 100 155

160 GND SD2

LTC6957-3 (CMOS)

165 100

Scan barcode for more LTC6957-1 (LVPECL)


1k 10k 100k OFFSET FREQUENCY (Hz)

LTC6957 information

1M

For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal

13

P OWER MAN AG EMEN T

LT6110 Cable/Wire Drop Compensator


Cable Drop Compensator Corrects Remote Load Regulation Errors without Sense Wires
The LT6110 is a precision high side current sense with a current mode output, designed for controlling the output voltage of an adjustable power supply or voltage regulator. This can be used to compensate for drops in voltage at a remote load due to resistance in a wire, trace or cable. The LT6110 monitors load current via a series-connected internal or external sense resistor. Two current mode outputs, one sinking and one sourcing, are provided that are proportional to the load current. This allows the LT6110 to adjust the output voltage of a wide variety of regulators. Either output may be used to monitor the load current. Low DC offset allows for the use of a small sense resistor, as well as precise control of small variations in wire voltage drop.

FEATURES:
Improve Voltage Regulation to a Remote Load by 10 Ideal for Resistor-Adjustable Voltage Regulators Gain Configurable with a Single Resistor High Side Current Sensing:
Integrated 20m Sense Resistor for Up to 3A Ability to Use an External Sense Resistor

APPLICATIONS:
Automotive and Industrial Power Distribution USB Power DC/DC Converters Plug-In DC Adapters Power over Ethernet

300V Maximum Input Offset Voltage Output Current Accuracy of 1% Maximum 30A Maximum Supply Current 2V to 50V Supply Range Fully Specified from 40C to 125C Available in Low Profile (1mm) ThinSOT and (2mm 2mm) DFN Packages
VREG ILOAD RWIRE

video.linear.com/160

VIN

IN

OUT

VLOAD

REGULATOR FB GND

RIN +IN V+ RS IN 5V 500mV/DIV VLOAD UNCOMPENSATED 5V 2A IMON V 1A VLOAD COMPENSATED ILOAD 200s/DIV REMOTE LOAD

IOUT

LT6110

Scan barcode for more LT6110 information

14

For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal

80V Sync Buck-Boost


Variable Input 2.8V to 80V
IIN SET

Up to 250W

IOUT SET

Fixed Output 1.3V to 80V

Input Current: Regulate or Monitor


BG1 TG1 CSNIN CSPIN

CSN

CSP BG2 TG2

Output Current: Regulate or Monitor

LT8705

CSPOUT CSNOUT

VIN SET

FBIN GND

FBOUT

VOUT SET

Four Regulation Loops (VOUT, I OUT, VIN and IIN)


The LT 8705 is the latest in our growing family of single inductor buck-boost controllers. This wide input voltage range, high power controller is capable of delivering efficiencies up to 98.5% for a 48V, 5A output from an input voltage range of 2.8V to 80V. Using a single inductor and 4 external MOSFETs, the LT8705 can deliver output power up to 250W. Input or output voltage or current, any of these can be regulated with the devices 4 control loops. Its input regulation loop is ideal for high impedance sources such as solar panels.

Features
Single Inductor Very High Efficiency VIN Range: 2.8V to 80V VOUT Range: 1.3V to 80V VOUT, IOUT, VIN, IIN Feedback Loops Current Monitors Synchronous Rectification Quad N-Channel MOSFET Gate Drivers Solar-Powered Battery Charger Capable

36V to 80V Input; 48V, 5A Output


100 99.0 98.0 97.0

Info & Free Samples


www.linear.com/product/LT8705 1-800-4-LINEAR

Efficiency (%)

96.0 95.0 94.0 93.0 92.0 91.0 90.0 0.5 1.00 2.00 3.00

VIN = 36V VIN = 48V VIN = 80V


4.00 5.00

video.linear.com/138
, LT, LTC, LTM, Linear Technology and the Linear logo are registered trademarks of Linear Technology Corporation. All other trademarks are the property of their respective owners.

Load Current (A)

P OWER MAN AG EMEN T

High-Efciency Buck Regulator SuperSwitcher II


19V, 6A/9A/12A High-Performance Integrated FET Buck Regulator
The MIC2405x family of devices (MIC24051/2/3/4/5/6) operates with a single-input supply voltage range from 4.5V to 19V and delivers output currents of 6A, 9A, and 12A respectively. They are all available in small footprint, 28-pin, 5mm x 6mm MLF packages. The common footprint shared by all devices in this family enables current scalability, which provides design exibility for the power supply designer. This family of regulators has been tailored to be Any Capacitor stable, independent of the output capacitance Equivalent Series Resistance (ESR), thus solving the perpetual problem of stability that power designers face when dealing with distributed output capacitance. Moreover, these buck regulators provide more than 95 percent peak efficiency and operate at a 600kHz switching frequency with 1 percent of output voltage accuracy (with an output adjustable down to 0.8V).

FEATURES:
High delta-V operation: (VIN=19V and VOUT=0.8V) Any Capacitor stable: zero-to-high ESR 10A typical current meets energy star requirements Hyper Speed Control allows for small output capacitance for a given load transient vs. the competition Low cost and small solution size for any given conversion ratio HyperLight Load enables up to 80% effi ciency at 10mA, which meets energy star compliancy requirements Power Good (PG) output Foldback current limit and "hiccup mode" short-circuit protection Safe start-up into pre-biased loads Entire MIC2405X family are available in a 28-pin MLF package that enables quick and exible design changes

BENEFITS:
Versatile Buck Regulators Small Solution Size & Cost Low Power Consumption Fully Protected Flexible Packaging

APPLICATIONS:
Servers, workstations Routers, switches, and telecom equipment SSDs and graphic cards 4G/LTE base stations

ORDERING INFORMATION:
Part
MIC24051YJL MIC24052YJL MIC24053YJL MIC24054YJL MIC24055YJL MIC24056YJL Scan barcode for more SuperSwitcher II information

IOUT (A)
6 6 9 9 12 12

HyperLight Load
X

Hyper Speed Control


X X

Package
28-Pin 5mm x 6mm MLF 28-Pin 5mm x 6mm MLF 28-Pin 5mm x 6mm MLF 28-Pin 5mm x 6mm MLF 28-Pin 5mm x 6mm MLF 28-Pin 5mm x 6mm MLF

X X X

16

For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal

Micrel Step Down DC/DC Selector Guide

P OWER MAN AG EMEN T

I OUT
0.3A - 1.0A
MIC2205/6 MIC2245 MIC2285 MIC3385* MIC23030/1 MIC23050/1 MIC23250 MIC23451 MIC23603 MIC33030* MIC33050*

1.0A - 2.0A
MIC2267 MIC4720 MIC4721 MIC4723 MIC23150 MIC23153 MIC23155 MIC23156 MIC23158/9 MIC23163/4 MIC23201 MIC23450 MIC33153* MIC38150* MIC4782 MIC24420/1 MIC2179

2.0A - 3.0A
MIC2207/8 MIC4722 MIC4723 MIC4742 MIC22205 MIC23150 MIC23153 MIC23201 MIC23303 MIC38300

3.0A - 6.0A
MIC22405 MIC22601 MIC22602 MIC23603

6.0A - 12.0A
MIC22705 MIC22950

5.5V

6.0V

MIC4724 MIC2177 MIC2178 MIC24051/2 MIC2124 MIC24053/4 MIC24055/6 MIC2165/6 MIC26400 MIC26600 MIC26601/3 MIC26950 MIC26901/3 MIC261201/3

V IN(MAX)

16.5V 19.0V 24.0V 26.0V 28.0V 30.0V 34.0V 36.0V 40.0V 75.0V
*Regulator with Internal Inductor **Controller

MIC4574/5

MIC4681 MIC4684 MIC4680 MIC4690

MIC4685 MIC4682 MIC4576 MIC27600

LM2574/5

LM2576 MIC28500 MIC28510 MIC2103**

17

P R OG R AMMAB LE LOG I C

Cool FPGA Designs with Lattice


The iCE40 family of FPGAs is designed for applications that have the most aggressive power, cost and footprint requirements. Ideally architected for smartphones, tablets, digital still cameras, and other space and power constrained systems, the iCE40 family uses a highly cost optimized fabric. This family is a popular choice for functions such as sensor management, video and imaging, custom connectivity, memory / storage expansion and glue logic. iCE40 FPGAs use the most advanced packaging technology available to meet the aggressive requirements of mobile, portable and extremely space-constrained devices. iCE40 FPGAs are available in packages as small as 2.5 x 2.5mm, allowing designers to quickly integrate more functionality into a significantly smaller space. iCE40 FPGAs are available in two series: low power (LP) and high performance (HX). Contact your Nu Horizons FAE today to discuss how iCE40 devices can be used in your design.

ULTRA LOW POWER

ULTRA LOW DENSITY

SMALL FOOTPRINTS

LOWEST COST

FEATURES:
Ultra-low power consumption starting at 25uW Ultra-small footprint packages starting at 2.5x2.5mm Configure from on-chip non-volatile memory or via SPI port Fabricated on advanced 40nm standard CMOS process for low cost Up to 7680 LUTs Up to 2 phase-locked loops supporting dual outputs Flexible block RAM

iCE40 "Los Angeles" FPGA Family Table:


LP Series (Low Power) Features Logic Cells Embedded RAM Bits Phase-Locked Loops Typical Core Current (A, @ 0 KHz, 1.2V Vcc) LP384 384 0 0 21 LP1K 1,280 64K 1 100 LP4K 3,520 80K 2 360 LP8K 7680 128K 2 360 HX Series (High Performance) HX1K 1,280 64K 1 267 HX4K 3,520 80K 2 667 HX8K 7680 128K 2 1100

Scan barcode for more iCE40 family information

18

For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal

Samsung + LED Lighting + Nu Horizons = Innovative Lighting Solutions


Samsung is committed to leading the LED lighting revolution, and Nu Horizons is committed to delivering the right solution to meet your LED project needs. Mid-power white LEDs

High-power white LEDs

High-voltage white AC LEDs

High-voltage white DC LEDs

Outdoor Modular and Array Engines Automotive (white, red, amber) Ambient Light Engine (tile and linear)

Downlight Engine

Let Nu Horizons be your design and manufacturing solution partner for your lighting needs. Learn more at www.nuhorizons.com/ledlighting or scan the QR code below with your smart phone.

LED Lighting Solutions


from

Design

Custom LED

Assembly

P OWER S U P P LI ES

The Worlds Most Flexible Power Supply


The Modular Power Supply of Choice for Industrial, Medical, and Military Applications
The Xgen series brings modular power supplies to a new paradigm, combining technical excellence with logistics simplicity to exceed the most demanding requirements from any industry. The Xgen platform is the most exible user configurable modular power supply in the world. Xgen provides up to 12 outputs in power levels of 200W to 1340W and is used throughout various industries including Medical, Industrial, Communications and Military electronics. With universal input voltage of 85-264VAC, the Xgen series can deliver up to 12 isolated output voltages ranging from 1.0V up to 58.0V. Outputs can be parallel connected for higher current and series connected for higher voltages. With its unique Plug and Play architecture, a custom power supply can be configured in a matter of minutes from off the shelf modules. The Xgen series carries full safety agency approvals including UL60950, UL60601-1 and EN60601-1 3nd edition, meeting the stringent low leakage current and 4kV isolation requirements of the medical industry. Xgen also meets conducted EMI limits, including FCC Class B and EN55022 Class B as well as all relevant Immunity limits simplifying the system integration into a wide range of applications. The Xgen series offers a wide range of optional features to meet the demands of a wide range of applications. These include: Fan Options including Ultra Quiet fans for acoustic sensitive applications, Ruggedisation for Shock and Vibration (Mil-STD 810G) and Conformal Coating for harsh operating environments, Ultra Low Leakage Current for Medical applications as well as various Input Connector options (IEC, 3 wire input and Screw terminals) to simplify system integration.

FEATURES:
Extra low profile: 1U height (40mm) High Efficiency: typ. 90% Plug & Play Power - allows fast custom configuration Individual output control signals All outputs fully oating Series / Parallel of multiple outputs 5V bias standby voltage provided EN60601-1 3rd edition approved (on medical products) EN60950 and UL60950 Low Acoustic noise <38.3dBA (on selected products) MIL-STD 810G (on selected products) MIL-461F (on selected products) Standard Xgen product options include: Conformal Coating, Low Acoustic Noise, Low Leakage Current, Extra Ruggedisation, Connector, Cabling & Mounting options, Thermal Signals and Reverse Fans.

BENEFITS:
Ultra high efficiency, reducing system heat losses High Power Density saves system space High Reliability with 3 year warranty Custom power, off the shelf with no NRE International Safety and EMC compliance, simplifies system compliance

APPLICATIONS:
Medical Medical Imaging, X-ray, CT, MRI and Ultrasound Medical and Dental Lasers Clinical Diagnostic Equipment Industrial Laser Marking and Cutting Equipment Optical Inspection Equipment Wafer Fabrication Equipment Communications Wireless Telephony Equipment Base Stations and Bulk Power System Data communications Hi-Rel COTS Radar Systems Data Acquisition (Ground and Mobile) Test Equipment

Scan barcode for more Xgen product information

20

For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal

XL375 Series Power Supply Family


Small, high efficiency design: over 15 Watts per in3
POWER SUPPLY DESIGN LEADER N2Power's latest small, high efficiency XL375 AC -DC Series power supply family again leads the power density race. Our advanced technology yields a very small footprint, reduces wasted power, and offers the highest power density in its class. High efficiency means reduced energy costs, greater return on your investment, greater reliability and longer product life. UNMATCHED POWER DENSITY With an overall height of 1.5" and a 3.3" x 5" footprint, the XL375 Series boasts a power density over 15 watts per cubic inch. It is ideally suited for OEMs using the industry standard 1U chassis. Seven models deliver output voltages from 12V to 56V, and up to four units can be wire-OR'ed together to increase the total main output power up to 1,400 watts. HIGH EFFICIENCY IN A SMALL PACKAGE The XL375 Series delivers up to 93% efficiency. Our unique design reduces energy consumption and generates less heat. It requires little forced air cooling, decreases AC loading, increases reliability and economy of operation. Comparisons of efficiencies show that our supplies can reduce losses up to 50%. REPEATABLE QUALITY Each N2Power supply undergoes a complete functional test and a multi-hour burn-in to insure that every unit meets our stringent quality requirements. Each power supply design is also rigorously tested by UL, DEMKO, and European agencies, with scheduled factory audits to ensure ongoing compliance. REGULATION (%)
3 5 5 3 5 5 3 5 5 3 5 5 3 5 5 3 5 5 3 5 5

P OWER S U P P LI ES

MODEL
XL375-12 +12VDC

OUTPUT
V1 V2 V3 V1

VOLTAGE
12 12 5sb* 24 12 5sb* 28 12 5sb* 40 12 5sb* 48 12 5sb* 54 12 5sb* 56 12 5sb*

MAXIMUM CURRENT (A)


30.0 1.0 1.0 15.0 1.0 1.0 12.8 1.0 1.0 9.0 1.0 1.0 7.5 1.0 1.0 6.7 1.0 1.0 6.4 1.0 1.0

RIPPLE & NOISE (P-P)


100 mV 80 mV 50 mV 200 mV 80 mV 50 mV 200 mV 80 mV 50 mV 200 mV 80 mV 50 mV 200 mV 80 mV 50 mV 200 mV 80 mV 50 mV 200 mV 80 mV 50 mV

FEATURES:
375W AC-DC 12V, 24V, 28V, 40V, 48V, 54V and 56V models 3.3 x 5 x 1.5 footprint Up to 93% efficient Active current sharing for N, N+1 Remote On / Off 5V standby supply 12V aux output

XL375-24 +24VDC

V2 V3 V1

XL375-28 +28VDC

V2 V3 V1

BENEFITS:
Requires little forced air cooling High power density: >15W / in3 Saves design space Reduced power consumption Increased reliability

XL375-40 +40VDC

V2 V3 V1

XL375-48 +48VDC

V2 V3 V1

XL375-54 +54VDC

V2 V3 V1

APPLICATIONS:
Telecom systems Test and measurement Gaming systems LED lighting control systems

XL375-56 +56VDC

V2 V3

All outputs are isolated from the chassis and share a common return. *12Vsb optional

Scan barcode for more XL375 series information

For more information, including pricing, availability, datasheets and samples (if available), please visit www.nuhorizons.com/portal

21

APAC

FRANCHISE BY TERRITORY

NU HORIZONS CONTACT INFORMATION


Australia / New Zealand

APAC HEADQUARTERS:
Nu Horizons Electronics Asia Pte Ltd. No. 50 Kallang Avenue #06-01 Singapore 339505 Phone: (65) 6844-1650 Fax: (65) 6841-0494 Email: asiasales@nuhorizons.com

Hong Kong

Taiwain

ASEAN

Korea

China

SUPPLIER NAMES
Allegro MicroSystems, Inc. Amulet Technologies Anadigm ANT / Dynastream California Eastern Laboratories (CEL) connectBlue Digi International Digital Core Design Emerson Network Power Exar Corporation Excelsys Technologies Finisar Corporation GE Energy (formerly Lineage Power) H&D Wireless AB IBM Semiconductor Solutions Integrated Silicon Solution, Inc. (ISSI) IXYS (Clare) IXYS (Zilog) Kyocera (formerly Optrex) Lattice Semiconductor Linear Technology Corporation Magnum Semiconductor Marvell Semiconductor Micrel Inc. Murata Power Solutions N2Power Nanya Technology Corporation Nordic Semiconductor ASA Nuvoton Technology Corporation Pericom Semiconductor Corporation Pletronics Inc. (PLE) Redpine Signals Samsung LED Co Ltd. Semicoa Semtech (formerly Gennum) Silicon Motion Technology Corporation SMSC Supertex, Inc. SynQor Telefunken Semiconductors GmbH Vitesse Wrth Midcom

India

GREATER CHINA:
Beijing Tel: (86) 10-82250019 Tel: (86) 10-82252349 Tel: (86) 10-82250979 Fax: (86) 10-82253233 Chengdu Tel: (86) 28 6622-5166 Fax: (86) 28 8628-2522 Guangzhou Tel: (86) 20 8232-7764 Fax: (86) 755 8219-0980 Hangzhou Tel: (86) 21 6441-1811 Fax: (86) 21 6432-5790 Hong Kong Tel: (852) 3511-9911 Fax: (852) 3511-9990 Nanjing Tel: (86) 21 6441-1811 Fax: (86) 21 6432-5790

Shanghai Tel: (86) 21 6441-1811 Fax: (86) 21 6432-5790 Shenzhen Tel: (86) 755 3398-2850 Fax: (86) 755 8219-0980 Taiwan Tel: (886) 02 8797-3718 Fax: (886) 02 8797-3719 Wuhan Tel: (86) 27 8779 6670/71 Fax: (86) 27 8769-0820

INDIA:
Bangalore Tel: (91) 80 40878999 Fax: (91) 80 4122-2803 Chennai Tel: (91) 44 4351-2474 New Delhi Tel: (91) 11 4167-4374/75 Fax: (91) 11 4167-4376 Pune Tel: (91) 20 2422-0071 Fax: (91) 20 2422-0071

Hyderabad Tel: (91) 40 6631-6357 Fax: (91) 40 4002-0807

REST OF ASIA:
ANZ - Melbourne Tel: (613) 9737-4995 Fax: (613) 9737-4982 Korea Tel: (82) 31 3875 277 Fax: (82) 31 3875 288 Malaysia Tel: (604) 210-9688 Fax: (604) 210-9683 Philippines Tel: (65) 6844-1650 Fax: (604) 660-5883 ANZ - Sydney Tel: (614) 3413-4134 Fax: (613) 9737-4982 Thailand Tel: (662) 694 1368/9 Fax: (662) 694-1370 Vietnam Tel: (65) 6844-1650 Fax: (604) 660-5883

APAC

SUPPLIER LISTING
Magnetic Linear & Angular Position Sensor ICs, Magnetic Digital Position Sensor ICs, Current Sensor ICs, Magnetic Speed Sensor ICs, Motor Driver & Interface ICs, Regulators and Lighting
Graphical OS Chips, Display Modules, Boards

Video Encoders, Transcoders, Decoders, SoCs, Coprocessors Processors, Storage, Wireless, Switching, Digital Entertainment, Broadband, PC Connectivity, Transceivers, System Controllers, Powerline Communications Analog, High Bandwidth, Ethernet, RF Solutions

Dynamically Programmed Analog Signal Processors (dpASPs), Field Programmable Analog Arrays (FPAAs) Wireless Sensor Network Protocol and Silicon Solution for Ultra-Low Power Networking Applications RF Semiconductors, Fiber Optic Devices, Optocoupler & Solid State Relays, MeshConnect Wireless Modules & ICs Bluetooth, 802.11 Wi-Fi Modules, ZigBee, Wireless Accessories Wireless & Wired Embedded Solutions, Wireless Routers & Gateways, Cellular Modems & Peripherals, Remote Display Connectivity, Single-Board Computers and Operator Interfaces IP Cores and System-on-Chip Solutions

DC/DC Converters, AC/DC Power Supplies, Digital Panel Meters, Magnetics, Data Acquisition

AC/DC Power Supplies, DC/DC Power Supplies

DRAM components (SDR, DDR, DDR2, DDR3), Mobile DRAM (LPSDR, LPDDR, LPDDR2), DDR3 SDRAM Modules

Bluetooth Low Energy ICs, Single Chip ANT ICs, 2.4 GHz RF ICs, Sub 1 GHz RF ICs Audio/Speech, Telecommunications, Microcontrollers, Bus Interface, Power Management, I/O PCI Express, USB, Signal Conditions, Timing, Switching, Connectivity, Power Management

AC Power and UPS, DC Power, Embedded Power, Surge Protection

Communications, Networking, Storage, Interface, Power

Clock Oscillators, TCXO, VCXO, OCXO, Crystals

High-efficiency, Low-profile Power Supplies

802.11 Wi-Fi Chipsets and Modules

Optical Components, Optical Modules

LED Modules/Arrays, LED Tube, Outdoor Lighting, BLU, Automotive, Middle Power LEDs, High Power LEDs, Flash LEDs Diodes, Bi-polar and MOSFET Transistors for High Reliability Applications
Power Management, ESD Protection, Timing and Synchronization, Optical Transport Equipment (SerDes), HiRel MIL, Low-Power RF, Digital Sensor/Signal Conditioning ICs (also see Gennum)

AC-DC Power Supplies, DC-DC Converters, Power Modules, Power Solutions, Power Supplies
Video Transport, Optical Modules, Signal Integrity (also see Semtech)

802.11 Wi-Fi Modules

Automotive, Wireless Audio, USB, Ethernet & Embedded Networking, PC System and I/O Controllers, Storage, Thermal Management, Capacitive Touch Sensors LED Drivers, Electroluminescent Lamp Drivers, Medical Ultrasound, High Voltage Interface/Driver ICs

Microelectronics (PPC & STB)

DRAM and SRAM Memory, Audio Drivers, Multi-function IO Drivers, LED Drivers, Temperature Sensors Clare - Display Products, High Voltage Devices, Optocouplers, ICs, Power Products, Solar Power Products, Solid State Relays, Telecom Products. Zilog - Microcontrollers (8, 16, 32-bit) TFT LCDs, TFT LCD with LED, Touch Screen Solutions, Color Graphic LCDs, Monochrome Graphic LCDs, Character LCDs Programmable Clock Devices, Programmable Power Manager Devices, Programmable Logic Data Conversion, Signal Conditioning, Power Management, Interface, High Frequency & Optical, Timing

DC/DC Power Converters, EMI Filters, AC/DC Power Supplies

AC-DC Off-line, DC-DC Switching Regulators, High Voltage Gate Drivers, Interface, System Test Ethernet Transceiver, Switches, and MACs, Transport Processing Products, Signal Integrity, Physical Media and Physical Layer Devices Transformers, Custom Magnetics, EMC Ferrites, Inductors, RF Components

SEMICONDUCTORS |

SUPPLIERS BY PRODUCT CATEGORY


Power & Battery Management Sensor & Imaging Arrays

Embedded Solutions*

Signal Conditioning

System Monitoring

Optoelectronics

Power Supplies

Disk / Interface

System-Level*

Physical Layer

Bus Interface

Audio / Video

Converters

Processor

Datacom

SUPPLIER NAMES
Allegro MicroSystems, Inc. Amulet Technologies* Anadigm ANT / Dynastream* California Eastern Laboratories (CEL) connectBlue* Digi International Digital Core Design* Emerson Network Power Exar Corporation Excelsys Technologies Finisar Corporation GE Energy (formerly Lineage Power) H&D Wireless AB* IBM Semiconductor Solutions Integrated Silicon Solution, Inc. (ISSI) IXYS (includes Clare and Zilog) Kyocera (formerly Optrex)* Lattice Semiconductor Linear Technology Corporation Magnum Semiconductor Marvell Semiconductor Micrel Inc. Murata Power Solutions Nanya Technology Corporation N2Power Nordic Semiconductor ASA Nuvoton Technology Corporation Pericom Semiconductor Corporation Pletronics Inc. (PLE) Redpine Signals* Samsung LED Co Ltd Semicoa Semtech Corporation (includes Gennum) Silicon Motion Technology Corporation SMSC Supertex, Inc. SynQor Telefunken Semiconductors GmbH Vitesse Wrth Midcom

* Please refer to the Display / Embedded / System-Level table for more detailed product information.

Wireless

Telecom

Display*

Memory

Timing

Logic

DISPLAY / EMBEDDED / SYSTEM-LEVEL |

SUPPLIERS BY PRODUCT CATEGORY

LCD Controller Solutions

Embedded Solutions / Single Board Computers

Open Frame / Panel PC Solutions

Imaging Solutions

Cable Solutions

MCU Product Solutions

SUPPLIER NAMES D IS P L AY / E M B E D D ED S UP P L I ER S
AAEON Amulet Technologies Applied Concepts Axiomtek Connect Tech Digi International Digital View Emerging Display Technologies (EDT) Endicott Research Group, Inc. (ERG) Estecom-USA HanTouch USA IEI Technology Corp. Kordis Media Co., Ltd. Kyocera Display America, Inc. (formerly Optrex) Landmark Technology Lattice Semiconductor Leopard Imaging LG Display Microsemi NLT Technologies Nu Horizons Custom Solutions OSD Displays Pervasive Displays Pixel Qi Quadrangle Products Inc. Reach Technology Inc. Sharp Microelectronics of the Americas Tianma Touch International Touch Revolution

SYS T E M - L E VE L P R O D UC T S
ANT Cogent Connect Blue Digital Core Design H&D Wireless IAR Systems Icron Leopard Imaging Redpine Signals RF Digital

Not all lines are franchised in all Nu Horizons territories. Please refer to the APAC Supplier Listing and Franchise by Territory table for suppliers available in APAC region.

USB Solutions

Touchscreens

LCD Monitors

RF / Wireless

IP / Cores

Inverters

Displays

LIGHTING |

SUPPLIERS BY PRODUCT CATEGORY


Thermal Management

Power Solutions

SUPPLIER NAMES D I S P L AY / E M B ED D ED S UP P L IERS


Allegro MicroSystems Atmel Endicott Research Group, Inc. (ERG) Exar Excelsys Technologies GE Energy (formerly Lineage Power) Integrated Silicon Solution, Inc. (ISSI) IXYS (includes Clare) LEDIL LED Specialists LHV Power Linear Technology Marvell Mean Well Micrel Microsemi N2Power Nu Horizons LED Lighting Solutions OPTO Electronix Samsung LED Sharp Microelectronics of the Americas STMicroelectronics Supertex Telefunken Semiconductors

Not all lines are franchised in all Nu Horizons territories. Please refer to the APAC Supplier Listing and Franchise by Territory table for suppliers available in APAC region.

ENHANCE YOUR DESIGN |

WITH NU HORIZONS EDUCATION AND DEVELOPMENT SOLUTIONS

ap.nuhorizons.com/featuredproducts

ap.nuhorizons.com/labcam

System Design

Light Engines

LED Drivers

Optics

LEDs

ap.nuhorizons.com/seminars

Application Notes
ap.nuhorizons.com/application_notes/

Development Tools
ap.nuhorizons.com/development

facebook.com/nuhorizonselectronics twitter.com/nuhorizons linkedin.com/in/nuhorizons

Nu Horizons and the Nu Horizons logo are registered trademarks of Arrow Electronics, Inc. Other trademarks and product information are the property of their respective owners.

youtube.com/nuhorizonsvideo

You might also like