Professional Documents
Culture Documents
MCC200 - Thyristor Modules
MCC200 - Thyristor Modules
MCC200 - Thyristor Modules
Thyristor Modules
VRSM VDSM V
VRRM VDRM V
Type MCC
6 7 1
5 4 2 1
3 2
1500 1400 MCC 200-14io1 MCD 200-14io1 1700 1600 MCC 200-16io1 MCD 200-16io1 1900 1800 MCC 200-18io1 MCD 200-18io1
5 4 2
MCD
Conditions TVJ = TVJM TC = 90C; 180 sine TC = 85C; 180 sine TVJ = 45C; VR = 0 TVJ = TVJM VR = 0 t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine t = 10 ms (50 Hz), sine t = 8.3 ms (60 Hz), sine
Maximum Ratings 340 196 216 8000 8600 7000 7500 320 000 311 000 245 000 236 000 100 A A A A A A A A2s A2s A2s A2s A/s
Features International standard package Direct copper bonded Al2O3 -ceramic base plate Planar passivated chips Isolation voltage 3600 V~ UL registered, E 72873 Keyed gate/cathode twin pins Applications Motor control Power converter Heat and temperature control for industrial furnaces and chemical processes Lighting control Contactless switches Advantages Space and weight savings Simple mounting Improved temperature and power cycling Reduced protection circuits
i2dt
(di/dt)cr
TVJ = TVJM; repetitive; IT = 500 A f = 50Hz; tP = 200s; VD = 2/3 VDRM; IG = 0.5 A; diG/dt = 0.5 A/s non repetitive; IT = 500 A
A/s V/s W W W V C C C V~ V~
TVJ = TVJM; VDR = 2/3 VDRM RGK = ; method 1 (linear voltage rise) TVJ = TVJM; tP = 30 s IT = ITAVM; tP = 500 s
t = 1 min t=1s
3000 3600
Mounting torque (M6) Terminal connection torque (M6) Typical including screws
Data according to IEC 60747 and refer to a single thyristor/diode unless otherwise stated.
IXYS reserves the right to change limits, test conditions and dimensions
1-3
448
TVJ = 25C; tP = 30 s; VD = 6 V IG = 0.5 A; diG/dt = 0.5 A/s TVJ = 25C; VD = 6 V; RGK = TVJ = 25C; VD = VDRM IG = 0.5 A; diG/dt = 0.5 A/s TVJ = TVJM; IT = 300 A, tP = 200 s; -di/dt = 10 A/s typ. VR = 100 V; dv/dt = 50 V/s; VD = 2/3 VDRM TVJ = TVJM; IT = 300 A, -di/dt = 50 A/s per thyristor; DC current per module per thyristor; DC current per module Creepage distance on surface Strike distance through air Maximum allowable acceleration
10-2
10-1
Fig. 1 Gate trigger characteristics 150 2 200 550 235 0.13 0.065 0.18 0.09 12.7 9.6 50 mA s
tgd 100 TVJ = 25C
s C A
s typ. limit
10
1 0.01 0.1 1 IG A 10
Optional accessories for modules Keyed gate/cathode twin plugs with wire length = 350 mm, gate = yellow, cathode = red Type ZY 180L (L = Left for pin pair 4/5) UL 758, style 1385, Type ZY 180R (R = right for pin pair 6/7) CSA class 5851, guide 460-1-1 Dimensions in mm (1 mm = 0.0394")
500 A IT , IF 400
300
200 TVJ = 125C 100 TVJ = 25C 0 0.0 0.4 0.8 1.2 1.6 V 2.0 VT, VF
IXYS reserves the right to change limits, test conditions and dimensions
2-3
448
106 I dt A2s
2
400 ITAVM A IFAVM 300 TVJ = 45C TVJ = 125C DC 180 sin 120 60 30
105
200
2000
100
0 0.001
104
0.01 0.1 s t 1
2100 W RthKA K/W 1800 Ptot 1500 1200 900 Circuit 600 300 0 0 100 200 A 300 ITRMS/IFRMS 0 25 50 75 100 125 TA C 150 0 200 400 A 600 0 IdAVM 25 50 75 100 125 TA B6 RthKA K/W
300
100
C 150
Fig. 7 Power dissipation versus on-state current and ambient temperature (per thyristor or diode)
0.30 K/W ZthJC 0.25 30 0.20 60 0.15 120 180 DC
Fig. 8
3~ rectifier bridge: Power dissipation versus direct output current and ambient temperature
0.10
0.05
0.00 10-3
10-2
10-1
100
101
Fig. 9 Transient thermal impedance junction to case at various condition angles (per thyristor or diode)
IXYS reserves the right to change limits, test conditions and dimensions
448
3-3