Professional Documents
Culture Documents
Question Bank For Short Answer Type Questions
Question Bank For Short Answer Type Questions
Question Bank For Short Answer Type Questions
[Year]
[Year]
43. A plane in such a way cuts a cone that cutting plane passes through the apex and is perpendicular to the base of cone. What is the true shape of the section? 44. What is the standard size of letters used in drawings? And what is the height to with ratio? 45. Two lines AB and PQ are of same length. Both are inclined to HP by 300 .the line AB is inclined to VP by 300 .the line PQ is inclined to VP by 450.then what about the top view lengths of AB and PQ which one is longer? 46. What are missing views? 47. A cone is resting with is apex on HP. Draw its projections? 48. Draw a triangle of sides 40,50 and 60mm and draw its isometric view considering it as top view. 49. When measurements are desired in three units scale is used? 50. What is least count? 51. What are projector lines? 52. A straight line is generated as the.. of a moving point. 53. When a point lies in the HP, its view from the front will lie a) on XY, b) belowXY, c) above XY. 54. How the side view of a point is obtained from its front and top views? 55. The projection of a line on to a plane parallel to it appears in its true length. (True /false). 56. When both the views coincide with XY the line is lying (a) in the HP (b) in theVP (c) in both HP and VP. 57. When a line is perpendicular to one of the planes, it is to the other plane. 58. When the line is perpendicular to HP. Its view from front is perpendicular/ parallel to XY. 59. What is a trace of a line? 60. The trace of a line is line/point. 61. A profile plane is perpendicular to HP and inclined to VP (true/ false). 62. When a line is contained by a plane its projection on that plane is a point/true length. 63. When a line is inclined to VP its projection on VP is true length/ shorter than true length. 64. When a plane is perpendicular to a reference plane, its projections on that plane is.. 65. Trace of a plane is a straight line/point. 66. What is an oblique plane? 67. When a plane is perpendicular to both the reference planes, its traces are a) inclined to XY b) perpendicular to XY c) parallel to XY. 68. A line is parallel to a plane if. 69. What is edge view of a plane? 70. When two planes intersect each other they intersect in a straight line (true/false). 71. When are auxiliary planes used or preferred? 72. What is the minimum number of views required to convey the three dimensions of a solid? 73. How are a cylinder and a cone generated? 74. When the axis of a solid is parallel to both HP and VP .View reveals the true shape.
[Year]
What is the purpose of sectioning of a solid? Section planes are represented by the traces/projections. How true shape of a section is obtained? The true shape of the section is revealed in the view from above When the section plane cutting the solid is parallel to When a sphere is cut by a section plane the true shape is a) ellipse b) circle c) parabola. The true shape of the section is., when a cylinder is cut by a section plane inclined to the axis. The inter section between a polyhedron and a section plane consists of a) straight lines b) curved lines c) both straight and curved lines. Name the different methods of developing a sphere. In isometric projections the three principal planes are fore shortened equally / unequally. The angle between isometric axes is. A circle in isometric view appears as Isometric view of a sphere is a circle of diameter. that of sphere. (different/ same).