Professional Documents
Culture Documents
Inert Systems
Inert Systems
Turnkey Systems
Low-Cost Solutions for High-Tech Industries
Compounding Aseptic Isolator meets USP<797> requirements page 20 Economical Smart Glovebox: integrated N2 controller maintains RH set point to 2 protect sensitive parts page 7
Control Capabilities* Low Humidity Process Gas Mix Vacuum to 5" WG Vacuum to 29.9" WG
Terras versatile designs let you configure a chamber to your exact process specificationsusing standard control modules and standard pricing!
Whichever modules you select, Terra will deliver a tested, turnkey system thats ready for service!
High Humidity
Step 1:
Refrigeration
(to -40C)**
* With selection of appropriate accessories ** Specify double-wall, insulated design for improved efficiency
Step 2:
Humidity Control
These modules monitor and regulate the process gas to maintain the humidity level you specify. Low-humidity modules achieve desired conditions by regulating the purge gas (nitrogen, argon, or dry air).
Gloveboxes and vacuum controls for a wide range of process pressures, from 5" WG to one atmosphere.
Static Control
Terra provides gas generators, mixers, and monitors to guarantee a reliable processing environment.
Terra engineers will configure the right combination of ionizers and dissipative materials to protect sensitive parts against ESD.
A wide range of process temperature solutions, from -40 to +300C. Double-wall, insulated gloveboxes ensure stable temperatures. The Sequence Controller allows multi-cycle process documentation and control.
Particle and Germ Control Begins on page 31 Terra helps you meet cleanliness requirements as low as Class 1 through laminar flow and HEPA/ULPA filtration technologies. Radius corners and ultra-clean materials contribute to a clean, aseptic processing environment. Laminar Flow and Exhaust Hoods Begins on page 34
Custom Modifications
Our engineers work hand-in-hand with yours to develop cost-effective solutions to unique application challenges.
Custom Sizes Equipment Interface Modules Double-wall Construction Special Inlet/Exhaust Filtration Easy-clean radius corners Process Equipment Enclosures Process Control Software More!
NOTE: All prices and specifications are subject to change without notice. Crating charges apply to selected items. Call for information.
2010 Terra Universal, Inc. All rights reserved. Printed in USA 121510
Seri es 1 00 P lasti Seri c es 2 00, 210 Seri , 31 es 3 0 00 S Seri S es 4 00 S S Seri es 5 00 F ull V Seri es 6 00 F iew r ont BioS View afe S S
Begins on page 30
Standard Gloveboxes
A/B. Series 100 Plastic Gloveboxes See page 8
Available in five materials 3 Polypropylene 3 Static-Dissipative PVC 3 Acrylic 3 Non-Dissipative PVC 3 Polycarbonate
A
Series 200
B
BioSafe Glovebox for sterile processing
D. BioSafe Gloveboxes
See page 21
Smooth, rounded corners with continuous seam welds for easy disinfection
C
Series 300
D
Series 400 with vacuum antechamber
E
Series 500
F
Series 600
Polycarbonate or safety glass front window Accommodates air locks and other access modules
I. Compounding Chamber
See page 20
Meets requirements of USP<797> for sterile compounding Laminar flow-through and recirculating designs
J. Insulated Glovebox
See page 22
Polyurethane insulation enhances energy efficiency Double-pane viewing window Operates with Terras Constant Temperature Modules (Shown in photo)
G
Compounding Aseptic Isolator
H
Insulated Glovebox
Sample Applications
System shown: Cat. # 1695-03 See page 22 for standard models.
Protein Analysis
A microscope bellows accommodates analytical equipment.
Sample Application:
Ordering Information
Begins on page 7 8
Designed for safe handling of pharmaceutical powders, this containment glovebox operates under negative pressure. Multiple ventilation ports ensure containment of powders when access doors are opened, and dual vacuum lines allow connection of vacuum wands for easy clean-up of powder spills. Powder containers are introduced into the outside chambers via dual pneumatically operated, footswitch-activated doors; a loading platform at the rear of the unit accommodates bulk containers. A large opening on the bottom of the central chamber connects to a containment drum by means of a rubber bellows, allowing safe removal of large packages or loose powder. Overall dimensions: 104"W x 32.5"D x 33"H.
8 Emergency Ventilation 4 Vacuum Lines Pneumatic Doors (rear access) Vacuum Ports
Designed to provide a clean, moisture-free environment, this glovebox is large enough to accommodate wafer spinners used in the deposition process. Its rounded internal corners also make it ideal for pharmaceutical powders. It incorporates a high-volume process gas mixer that controls percentages of two process gases. A three-sided plenum design recirculates the process gas through dual filter/fan modules for HEPA filtration (99.99% efficient @ 0.3 m particles). The bottom plenum includes cooling coils that compensate for heat-generating process equipment to ensure a constant temperature of 68F. Dual-side air locks afford easy loading and unloading of wafers.
Recirculation Plenum/Cooler/Clean-out
Sample Application:
Photoresist Deposition
Sample Applications
This glovebox safely contains potential biohazards while providing a stable environment over a broad range of temperatures (-2C to 36C) tested at various humidity levels between 0 and 75% RH. The stainless steel chamber features 2" of insulation and internal dimensions of 33" x 33" x 33" (overall dimensions: 37"W x 37"D x 52"H). A high-capacity air conditioner holds a stable temperature down to -2C, and a 4000W heater integrated into the evaporator coil achieves temperature stability to 36C. The dry nitrogen feed gas provides a low %RH; an ultrasonic humidifier provides elevated RH to 74% without moisture condensation. The chamber includes a bag-in/bag-out port that can be used for transferring waste out of the chamber. The large swing-up access door allows easy cleaning of the chamber. Bag-In/Bag-Out Port 9"-dia. port with closure operated from glovebox interior. Specify for any Terra Cat. # $/Each glovebox.
1694-43 260.00
Evaporator Coil with Heater 0% RH Nitrogen Low Temperature A/C Module Waste Chute
$/Each
1694-44
104.00
Ultrasonic Humidifier
This 12-gauge stainless steel isolation glovebox is designed for safe handling of radioactive materials used in medical applications. It features two chambers connected by a vacuum port. One-piece gaskets and heavy-duty counter-balanced port hatches ensure a low leak rate of 0.5% of the volume of the total enclosure per hour (tested under 5" WG of vacuum).
Bag-in, Bag-out access port allows safe handling of packaging containing radioactive materials
Ordering Information
Begins on page 7
Humidifier (98% RH) % CO Display/ Control Variable Purge Controller CO Air Lock
% RH Display/ Control
Air Lock
Sample Applications
A / C + Heater
HEPA
HEPA
HEPA
HEPA
HEPA
Dry Cycler
N2 Generator
Ideal for work with semiconductor components, medical devices and pharmaceutical powders Fully integrated turnkey system takes seconds to install and program A
13" 9" F I
N M D
Nominal Dimensions
A D F H I L M N
12
20
26
18
11.1 10.5
10
11
Other Accessories
Stainless Steel Work Surface
Recommended for use in plastic chambers to prevent scratching. Price includes installation (order together with glovebox).
Cat. # $/Each Cat. # $/Each
3305-44 195.00
Unless indicated, all feature a size 9 hand and are for 8" port.
Two-piece Accordion Sleeve/ Nitrile Glove Combination One-piece Neoprene (black) Hypalon (white, shown above)
Polycarbonate
Cat. # $/Pair
Acrylic(1)
Static-Dissipative PVC(2)
$/Each Cat. #
Polypropylene(4)
Cat. #
$/Each Cat. #
$/Each Cat. #
$/Each Cat. #
$/Each Cat. #
4,098.00 2,022.00
(1) Acrylic is damaged by alcohol and other cleaning agents. (2) Includes grounding terminals. Stainless steel work surface is required to prevent scratching the dissipative surface. (3) Standard mounting is on right side (as shown in photo). Includes gas inlet to allow gas purging (4) Includes 120VAC/60Hz fluorescent light
Series 100
Polymer Gloveboxes
An economical controlled processing environment for a wide range of manufacturing and testing operations Dual-gasketed side doors and a fully gasketed back permit introduction of small and large equipment Optional gas purge controls automatically 3 establish a particle-free environment 3 maintain a humidity set point down to 0% RH 3 minimize system recovery time 10"-diameter glove ports accept a wide variety of gloves, including Terras accordion sleeve and glove assembly Available in five materials: acrylic, static-dissipative PVC, nondissipative PVC, polypropylene and polycarbonate Terras Series 100 Polymer Gloveboxes provide a clean, low-humidity environment for critical processing operations in such industries as semiconductor and pharmaceutical manufacturing. Their modular design lets you select the options you need for your application. Dual side access doors open inward to allow easy parts transfer from inside the chamber. Doors feature stainless steel reinforcement frames that increase the structural rigidity of the door by a factor of five. A builtin LiftLatch securely seals the door without applying lateral torque that could damage hinges.
How to Order: 1. Select the glovebox of the desired size (single or twin) and material from the ordering table below. 2. Select the Air Lock for your application. The Standard or Pass-Through Air Lock is for connection to one glovebox; Universal Air Lock allows connection of two gloveboxes in series. Right-side mounting is standard. 3. Read across the table to select the appropriate accessories for your system; all prices include installation. Other optional accessories are listed on the following pages.
15" 10" F I
15" 10" F
15" 10" I
Single Twin
16.75 16.75
24 24
35 59
25 25
11.5 11.5
10 10
10 10
14 14
Type
See Dimensions Above
Cat. #
Nondissipative PVC
Polypropylene***
Polycarbonate
$/Each Cat. #
$/Each Cat. #
$/Each Cat. #
1689-00F 1689-16F
2,728.00 3305-03E 2,222.00 1681-29E*** 2,260.00 1681-31E 2,871.00 1689-11 4,205.00 3305-11E 3,077.00 1681-30E*** 3,303.00 1681-32E 4,431.00 1681-33
383.00 536.00
* Complete with inlet and outlet for gas fittings and relief/bleed valve (order separately). ** Includes grounding terminals. The Stainless Steel Work Surface is required with the Static-Dissipative PVC glovebox to prevent scratching. *** Includes 110VAC, 50/60Hz fluorescent illuminator (for 220VAC/50Hz, add -220 to the part number). **** Acrylic is damaged by alcohol and other cleaning agents.
1680-67 1680-68
19.00 72.00
Series 100 Air Locks ** (each includes ports for nitrogen purging/bleeding)
Acrylic* Static Dissipative PVC2
$/Each Cat. #
Nondissipative PVC
Polypropylene3
Polycarbonate
$/Each Cat. #
$/Each Cat. #
$/Each Cat. #
1680-78B Standard Air Lock Pass-Through Air Lock 1680-79B 1680-80B Universal Air Lock
* Acrylic is damaged by alcohol and other cleaning agents. ** All are right mount chambers. Left mount chambers available.
Changeable Sleeve and Glove Combination (for 10"-diameter ports) Can be used with a variety of gloves, allowing you to change glove size or type without changing the sleeve itself. The con voluted section keeps the sleeve off the operators arm for better air circulation and comfort. Supplied with one pair of nitrile gloves (select desired size). Clamps included.
See page 24 for additional gloves.
Stands for Series 100 Gloveboxes Constructed of all-welded 2" square tubing.
Cat. #
$/Each Cat. #
1681-48 1681-49
692.00 1681-51
852.00
Glove Size 8 9 10
Cat. #
$/Pair
Fixed Rear Wall A fixed rear wall can be specified in place of the standard removable rear wall.
Cat. # $/Each
1681-58
122.00
IonBar (with fan module) Projects a balanced stream of ions for neutralization of static charges throughout a restricted area. Price includes installation inside specified glovebox. Models below are for 120VAC operation.
Cat. # $/Each
Detachable Bottom Allows Series 100 glovebox to be lifted for easy placement over large equipment.
Cat. # $/Each
1681-55
358.00
Plastic Glove Port (see pg. 27 for other designs) Standard on all Terra gloveboxes; can be retrofitted on chamber with 11.25" dia. cutouts. Price for single port.
Cat. # $/Each
Corresponding Options
Ionizing Bar
(see above)
Cat. # $/Each Cat. #
Fluorescent4 Illuminator
$/Each Cat. #
2005-32 2005-31
4 5
94.00 108.00
Comes standard on polypropylene models. Models above are 110VAC/60Hz. Add -220 to the catalog number for 220VAC/50Hz power. Mounted horizontally on the inside rear wall, 3" from the bottom (specify other position, if desired). Includes master on/off switch, 15-Amp circuit breaker and 4 outlets.
Series 200
See facing page for negative pressure configurations Stainless steel door frames with unique e profile elastomer gasket increase structural rigidity, extend service life, improve sealing performance
NegativePressure Gloveboxes
Ideal for drying, degassing, and ventilation applications Clear construction (of acrylic or polycarbonate) provides full visibility of work in progress Sturdy construction allows sustained negative pressure operation at 5" WG (29.9" Hg in vacuum antechamber) Vacuum safety valve included to prevent damage to walls or seals These economical vacuum gloveboxes are designed for degassing operations, chemical mixing, biological tests, and other processes requiring sustained negative pressure. Each chamber is fabricated out of solvent-welded 12" transparent material that combines full visibility with light weight, cleanliness and durability. Dual glove ports allow full access to work in progress. Select acrylic for general applications, or polycarbonate for resistance to a wide range of chemicals and thermal stress. Equipped with a vacuum safety valve on a standard basis, these chambers are designed for operations with sustained negative pressures down to 5" WG (Water Gauge). Dual side access doors open inward to allow easy parts transfer from inside the chamber.
No. 1681-15 with No. 1680-93 air lock Optional Swing-Up Front Access Panel
Other Options:
See gloves on page 26. Stainless Steel Work Surface Protects the bottom of the chamber against scratching. Price includes installation.
Cat. # $/Each
H N M D
Nominal Dimensions Glove Ports (inches). A D F H
1680-69 1689-11
192.00 383.00
8" F
I L M
Glove Port Covers O-ring ensures a tight seal. Includes handle for easy removal.
Cat. # $/Each
I
N
1694-53 1694-54
198.00 294.00
16.25
24
35
25
11.5
10
10
14
Corresponding Accessories
Vacuum Antechamber
1681-13C 2,409.00 1681-14C 4,576.00 1681-15C 2,040.00 1681-16C 3,877.00 1681-63 2,769.00 1681-67
* Cutout Size: 20"W x 10"H ** Acrylic is damaged by alcohol and other cleaning agents. *** Right mount acrylic airlock. Other styles at TerraUniversal.com
3,350.00 1680-93B
739.00
Vacuum Antechamber (ordering information above) Allows drying or degassing at up to one full atmosphere (29.9" Hg). Vacuum Control Module See page 32 for full description.
Port Caps
220VAC
Vacuum Pump
7901-00 7901-08
2,411.00 2,179.00
10
Series 210
Vacuum Gloveboxes
1.5"-thick reinforced acrylic walls support full vacuum (to 29.9" Hg) Dual hose barb fittings simplify connection to vacuum pump to allow rapid air removal and backfill with clean, dry process gas Perfect for anaerobic processing in a low-humidity nitrogen or argon environment Select Trace Oxygen Analyzer to maintain oxygen levels to 1 ppm The Series 210 Glovebox supports a wide range of vacuum and degassing operations to full vacuum (29.9" Hg). This vacuum capability also allows removal of atmospheric humidity and oxygen and backfill with a process gas, quickly providing a moisture-free, low-oxygen environment for applications as diverse as Lithium battery manufacturing and anaerobic pathogen studies. For automated vacuum control, select the Vacuum Control Module, pump and connection kit below. For automated backfill and purging, select the Dual Purge System and Trace Oxygen Analyzer, which work in tandem to provide oxygen levels down to 1 ppm(v). The optional air lock allows transfer of materials into the glovebox without breaching the controlled environment. Series 210 Vacuum Glovebox Includes leveling feet, dual valves for connection to vacuum pump and backfill gas source, pressure gauge and relief/bleed valve, which closes during vacuum operations. Order airlock gloves and vacuum/purge controls separately.
How to Attain Extremely Low RH/O2 Concentrations: Vacuum Cycling vs. Purge and Bleed Vacuum cycling provides the quickest, most economical way to achieve extremely low moisture and oxygen levels inside a glovebox. Purge-and-bleed displacement relies on a continuous purge of dry process gas (typically, nitrogen or argon) to displace moisture-laded air, which exits through a bleed valve. This process typically requires many hours, consumes a high volume of process gas, and may never achieve very low oxygen concentrations (below 5 ppm) required in many applications. Vacuum cycling evacuates ambient airand with it, moisture and oxygeninside a vacuum chamber or glovebox. When air is removed, you simply backfill the chamber with process gas until the chamber attains neutral pressure. If needed, this process is repeated until oxygen or moisture concentration reaches the desired level. Typically, only a few cycles, requiring only a fraction of the gas and time of a purge-and-bleed protocol, are all thats needed to reach single-digit oxygen concentrations. Once set point levels are attained, close off vacuum valves and use a Dual Purge System and appropriate controller (NitroWatch for relative humidity, Trace Oxygen Analyzer for O2 concentration) to maintain dry, anaerobic conditions.
Cat. #
$/Each
3305-46
7,287.00
H N L M D 8" F I
N
Right Mount
$/Each
3305-48
3305-49
935.00
Designed to support 29.9" Hg vacuum, it includes dual vacuum/gas valves and vacuum gauge. Vacuum Controls See facing page Purge Controls/Oxygen Analyzer See pages 28 29
Nominal Nominal Dimensions (OD includes external support ribs) Dimensions A D F H I L M (inches). OD 16 29 32 29.5 12.75 12 11 ID 14.69 22.13 30.25 22.75 10.83 10.13 9.13
17.33 13.63
Glove Ports
Special designs and materials, including oval stainless steel ports and bag-out ports. See page 27.
No. 1672-07
No. 1672-10
No. 1672-27
11
Series 310
10" 10"
10" 10"
No. 3305-54, shown with optional metering valves and vacuum gauge
10" 10"
Nominal Dimensions A D E F
16.56
24
28.25
35
11.75
28
28
14.75
14
Series 310 Negative Pressure Stainless Steel Glovebox (Tempered Safety Glass Window)
Material With Right-Side Air Lock
Cat. #
$/Each Cat. #
$/Each Cat. #
304 SS 316 SS
3305-54A 3305-60A
19,972.00 23,836.00
For 220V models, add -220 to the part number. Order gloves, port covers, and vacuum/purge controllers separately (full specifications at TerraUniversal.com)
Cat. # $/Each
Vacuum Valves (order two/chamber) Vacuum Gauge (order one/chamber) Glovebox Vacuum Control Module Automates vacuum application to allow vacuum/purge cycling, allowing rapid moisture and oxygen removal.
Glove Box w/ Pass Through, 1x1 Glove Box w/ Pass Through, 2x1 Glove Box w/ Pass Through, 3x1 Glove Box w/ Air Lock, 2x1 Glove Box w/ Air Lock, 3x1
34 x 25-7/8 x 24 (86.4 x 65.7 x 61) 52 x 25-7/8 x 24 (132.1 x 65.7 x 61) 70 x 25-7/8 x 24 (177.8 x 65.7 x 61) 52 x 25-7/8 x 24 (132.1 x 65.7 x 61) 70 x 25-7/8 x 24 (177.8 x 65.7 x 61)
The Captair Pyramid is a disposable isolation enclosure that provides excellent protection in a mobile design. The enclosure, base, and gloves are made of flexible PVC and assembled by high frequency welding to guarantee laboratory certified air tightness. Arm openings are equipped with cuffs on arm sleeves for better rigidity during handlings and support rods maintain the enclosure upright during manipulations. Each enclosure is factory tested by inflating the enclosure with compressed air at 2.5mm Hg. Test certificate is provided with each enclosure along with serial number for traceability.
Cat. # $/Each
3015-00
355.00
12
$/Each
2003-35 2003-36
492.00 492.00
Ionizing Bar
484.00 696.00
$/Each
Microscope Bellows
See page 19; indicate desired location.
1681-53 2400-21
234.00 364.00
Shown with Iris Ports Cat. # 1685-93, $421.00/pair. See page 19. Shown with Glove Ports Cat. # 2003-37, $261.00/each. See page 20 for gloves.
27"L x 5"W x 3"H; dissipative PVC housing. 120VAC, 60Hz. Other voltages and special lighting available, including germicidal UV.
Mini-Environment Enclosures
Material
Cat. # $/Each Cat. #
Left Side
$/Each
240.00 filter. Adds 13" to height. Exit 266.00 slots provided for air release. 277.00 Cat. # $/Each * Front access doors included (as in photos above). Side doors feature 6601-24-H 730.00 Temperature-controlled models 2003-20 Acrylic Static-Dissipative PVC 2003-21 2003-22 Polycarbonate 2,422.00 2003-25 3,142.00 2003-26 3,217.00 2003-27 240.00 2003-30 266.00 2003-31 277.00 2003-32
stainless steel frame and chrome-plated lift latch. Opening: 15"W x 21"H
C. Glovebox with Perforated Bottom: Accommodates recirculation of D. Polypropylene Glovebox: includes 0.5"-thick lead base and rear E. Glovebox with Recirculation System: FilterMate removes particles and
vapors from recirculated, low-oxygen environment
13
Series 300
Provides a clean, controlled environment for manufacturing processes in semiconductor, pharmaceutical, and other industries Transparent dissipative PVC window affords full view of processing area Side flanges simplify insertion/removal of process equipment and allow easy addition of ovens and air locks 10"-diameter ports accept a wide variety of gloves and accommodate port covers and iris adapters Select single model (with two glove ports) or twin model (with four glove ports) The Series 300 Stainless Steel Controlled Atmosphere Chamber provides a hermetically sealed environment for such manufacturing operations as resistance welding of semiconductor hybrids, parts degassing, temperature and humidity testing, and chemical mixing in a nonreactive environment.
Elastomer seal for superior performance
Air Lock Provides Convenient Access. Shown with optional viewing window. See page 24.
DewWatch Humidity Controller (see page 26) Glovebox Dual Purge System (see page 26)
Air Lock
Vacuum/Nitrogen Pump
14
Series 300
10"
Door Openings: 121/2" x 121/2" with gasketed doors supplied with air locks (see ordering information below); doors open inward. Arm Ports: 10" round with flange for connecting glove assembly. See page 25 Gas Ports: Fittings for 1/4" gas inlet and system pressure lines; port for Automatic RB Valve. Appropriate adapter inserts are supplied for any Terra gas systems ordered. Light: Fluorescent. (select voltage below) Window: Static-dissipative PVC
Glove
10"
Ports 2 4
Single Twin
16.5625 16.5625
24 24
28.25 56.75
35 59
11.75 11.75
28 28
16 16
14.75 14.75
14 14
10" 10"
220VAC
Right Side
$/Each Cat. #
Left Side
Cat. # $/Each
Single Twin
2 4
1694-01B 1694-02B
1702-11C 1702-11C
3,206.00 3,206.00
* 304 stainless steel with static-dissipative PVC viewing window ** Multiple air lock sizes available; see page 22
Stands for Series 300 Gloveboxes Constructed of all-welded 2" square tubing. Select oven support for use with Terras High-Performance Pass-Through Oven (No. 5401-00, see page 23). All stands raise chambers 28.75" off of floor (add 3" for casters).
Powder-Coated Steel Chamber Only Chamber and Oven
Cat. # $/Each Cat. # $/Each Cat. #
For Single Models (2 ports) 1690-03 For Twin Models (4 ports) 1690-04
No. 1690-03
1,614.00 1,860.00
$/Each
1700-44
234.00
Glovebox Dual Purge System NitroWatch NitroWatch Sensor Stainless Steel Automatic RB Valve Required for operation with Dual Purge System Accordion Sleeve/Glove Combination 18"L, with size 9 gloves (pair) Right-Side Access Door Left-Side Access Door High-Performance Vacuum Oven
23 26 26 26 24
IonBar (with fan module) Plastic Glove Port, Cover, and Iris Adapter Projects a balanced stream of positive ions for neutralization of static charges throughout a restricted 10"-diameter port is standard on all Terra gloveboxes. Order covers and iris area. Price includes installation inside specified adapter separately (see page 27). Cat. # $/Each glovebox. Models below are for 120VAC operation.
Cat. # $/Each
15
Series 400
Roomy 304 stainless steel chamber provides ample space for large processing equipment Interfaces with Vacuum Antechamber for vacuum operations down to 29.9" Hg Optional gas purge controls automatically maintain a humidity set point down to 0% RH/0.5 ppm(v) H2O These chambers are a larger version of the Series 300 chambers listed on the preceding pages. In addition to all of the features of the Series 300 models, these chambers also accommodate Terras Vacuum Antechamber, which supports vacuums down to 29.9" Hg for a wide range of operations in many industries. Their doublegasketed side flange allows easy insertion of large process equipment into the work chamber and easy mounting of the antechamber, a vacuum/nitrogen oven, or a standard air lock. Specifications: Series 400 Glovebox
Door Openings: 12" x 12" gasketed doors supplied with air locks (see ordering information on facing page); doors open inward. Arm Ports: 10" round with flange for connecting glove assembly Windows: Static-dissipative PVC
6061 Aluminum (with brass fittings); or stainless steel (with stainless steel fittings); high-vacuum design; TIG welded structure 15" dia. x 24" long 12" x 23"; extends to 14" beyond opening for loading Single center-clamped, O-ring sealed, counterbalanced, vertical travel; stainless steel on both models 1 x 10-3 Torr 21/2" compound Bourdon tube dial type 1" evacuation valve, 1/4" backfill valve, 1/4" IPS plug
Single Twin
2 4
1694-13B 1694-14B
9,529.00 14,776.00
Vacuum Antechamber
Model shown: Single Chamber (Cat. No. 1694-13) with Dual Purge System, Vacuum Antechamber and Vacuum Control Module
16
A G H N M D
Glove Ports A D E F G H
E
Vacuum Antechamber
E G H 15" 24"
M N
Air Lock
10" F
I
10" F
10" I
2 4
27 27
33 33
28.25 56.5
33 60
12.9325 12.9325
33 33
16 16
12 12
14 14 Air Lock**
All models include a 120VAC/60Hz fluorescent illuminator. For 220VAC/50Hz power, add -220 to the catalog number. For electropolishing of any stainless steel component, add -2 to the catalog number and 30% to the price. All dimensions in inches.
Stainless Steel**
Right Mount Left Mount
$/Each Cat. # Cat. #
Right Mount
$/Each Cat. #
Left Mount
Cat. #
Right Mount
$/Each Cat. #
Left Mount
Cat. #
Left Mount
Cat. # $/Each
5400-01 5400-03
5,564
* Requires support stand for safe operation (order below). For 220VAC operation, add -220 to the part number. ** Prices for left-mount and right-mount models are the same. Optional 7"W x 9.5"H safety glass viewing windowCat. # 1702-02
Stands for Series 400 Gloveboxes Constructed of all-welded 2" square tubing, these stands are specially designed to support Series 400 gloveboxes. Select powder-coated (white) steel or stainless steel stands, with or without rubber casters.
Heavy-Duty Casters (set of 4, 2 with brakes)
Cat. # $/Each
1700-44
234.00
1694-15 1694-16
818.00 367.00
IonBar (with fan module) Projects a balanced stream of positive ions for neutralization of static charges throughout a restricted area. Price includes installation inside specified glovebox. Models below are for 120VAC operation.
Cat. # $/Each
1694-23 1694-24
1,236.00 1,275.00
Glovebox Dual Purge System NitroWatch NitroWatch Sensor Stainless Steel Automatic RB Valve Required for operation with Dual Purge System Accordion Sleeve/Glove Combination 18"L, with size 9 gloves (pair)
1603-57 2,715.00 9500-00A 866.00 9500-02A 515.00 1606-60 180.00 1681-91B 269.00
23 23 23 23 20
Other designs see page 27
Plastic Glove Port Standard on all Terra gloveboxes; can be retrofitted on chamber with 11.25" dia. cutouts. Price for single port.
Cat. # $/Each
17
Series 500
Full-View Glovebox
Transparent front and rear panels ensure full visibility of work in progress Opposing glove ports allow convenient, dual-side access Large chamber size accommodates bulky process equipment Rugged 304 stainless steel top, bottom and sides create a durable, chemical-resistant enclosure Select access doors or air locks to allow convenient parts transfer The Series 500 Glovebox offers several convenient features that reduce the cramped, claustrophobic feeling operators often experience: a spacious processing chamber, transparent full-view windows, and dual-side access to work in progress. Select windows of polycarbonate or static-dissipative PVC, which helps control surface charges and the particles they attract. All models below include an externally mounted fluorescent illuminator. Terras 10" -diameter glove ports allow wide arm motion for easier parts manipulation; select gloves separately. Available with a full line of options, including side air locks or access doors for easy parts transfer, stands, and humidity control systems (see below).
H M N E D
Glove A D E F H I M N
17" 10" F I
2 4
26 26
36 36
14.75 14.75
48 96
30 30
16 16
14.75 14.75
Polycarbonate Panels
$/Each Cat. #
Right Mount
$/Each Cat. #
Left Mount
Cat. #
Left Mount
Cat. # $/Each
Single Twin
1694-31A 1694-32A
1702-13C 1702-13C
* All models are 120VAC, 50/60Hz. For 220VAC, add -220 to the part number. ** Mounted on either side panel; see page 22 for details. *** Mounted on either side panel; 18"W x 20"H.
Air Locks
Air locks minimize nitrogen loss and contamination while parts are introduced or removed. BioSeal design features noncontaminating polyurethane seals. Standard units on ordering chart above come with solid stainless steel door (select window below).
Cat. # $/Each
Stainless Steel
Cat. # $/Each
Powder-Coat Steel
Cat. $ $/Each
Single Twin
1694-39 1,919.00 1694-40 1,142.00 1684-75 2,007.00 1684-76 1,217.00 9670-02 1,256.00 9670-03 576.00
1702-02
442.00
18
Series 600
Front-View Glovebox
Polycarbonate or tempered glass front window allows full view of processing operations Stainless steel frame lends strength and chemical resistance Select access doors or air locks for convenient parts transfer Full range of optional accessories includes gloves, filtration modules and process gas controllers for automatic humidity control Full-front viewing windows on these chambers provide complete visibility of the processing environment and minimize the claustrophobic sensation created by other gloveboxes. Select chemical-resistant polycarbonate or tempered glass; all units come with a fluorescent illuminator and roomy 10"-diameter glove ports (order gloves separately).
Optional port cover seals against standard port to allow convenient glove replacement without compromising the internal environment
Cat. # $/Each
H M N E D
Glove A D E
17" 10" F
F H I M
1694-53
198.00
Optional iris port seals against standard port for easy access by operators with gloved hands
I
N
2
Cat. # $/Each
24
29
12
37.5
39
16
12
14
1694-54
Cat. #
Polycarbonate Panels
9670-01A
10,023.00 9670-00A
8,719.00 1702-14C
$/Each Cat. #
Right Mount
Cat. #
Left Mount
1702-15C
2,989.00 1694-45-600
$/Each Cat. #
Right Mount
Cat. #
Left Mount
1694-46-600
1,073.00
$/Each
* All models are 120VAC, 50/60Hz. For 220VAC, add -220 to the part number. ** Mounted on either side panel; see page 22 for details. *** Mounted on either side panel; 18"W x 20"H.
Optional Accessories (see also facing page) Sleeve and Glove Combination
Neoprene convoluted sleeve provides rigidity that enhances comfort and resists blowback in a pressurized chamber. Supplied with one pair of nitrile gloves of specified size. For 10"-diameter glove ports. See page 26 for other gloves.
Glove Size 8 9 10
Cat. # $/Pair
9500-10 195.00
19
This laminar flow glovebox provides an easy-to-clean environment for performing sterile pharmaceutical preparations. Its HEPA filtration module provides a positive pressure of 99.99% particle-free air inside the work area to meet ISO 5 requirements. A separate antechamber allows introduction of materials without contaminating the main work area. Includes polyurethane exit filter (HEPA exit filter available). Select gloves for 10"-diameter ports from page 26. Material: 304 stainless steel with tempered glass window. Dimensions: 50"W x 30"D x 51"H.
Cat. # $/Each
Includes IV rod
2900-46C 1694-80
6,819.00 1,036.00
See facing page for Mini-Environment Cleaning Kitideal for alcohol disinfection. Hydrogen peroxide sterilization systems also availablecall Terra for configurations.
These economical, ETL-listed sterilization modules are ideal for glovebox isolators and other confined, difficult-to-clean chambers. Their long-lasting, low-mercury lamps can be installed in most Terra stainless steel chambers, including BioSafe Gloveboxes and Compounding Aseptic Isolators. Call for pricing on a mounting system that accommodates your operation.
Cat. #
20
Available with sloping bottom and drain valve for disinfectant wash-down
BioSafe Gloveboxes
Smooth, ultra-clean surfaces eliminate germ traps, simplify cleaning and disinfection Continuous-seam interiors create a sealed chamber Tempered glass or polycarbonate viewing windows allow full view of chamber
Position Window Material
Cat. #
Includes fluorescent illuminator (UV sterilization bulbs available) Optional access panel available for equipment transfer Custom configurations availablecall to discuss your requirements!
316 Stainless Steel Twin
BioSafe Glovebox All models are 120VAC; 220VAC models available (37.5"W x 29"/24"D x 39"H)
Glovebox with Right-Side Air Lock* Glovebox with Left-Side Air Lock* Glovebox with Dual-Side Air Locks* 304 Stainless Steel Single Twin Single
$/Each Cat. #
(69"W x 29"/24"D x 39"H) 9670-19B 9670-20B 9670-25B 9670-26B 9670-31B 9670-32B 23,750.00 24,892.00 23,785.00 24,892.00 28,711.00 29,819.00
$/Each Cat. #
$/Each Cat. #
Each chamber includes pair of 10"-diameter glove ports (twin models include two pairs). Order gloves separately on page 26.
Cat. #
For Single
$/Each Cat. #
For Twin
$/Each
597.00 1,256.00
9670-43 9670-42
715.00 1,378.00
Removable Panel Allows you to remove and reseal front viewing window to allow transfer of large process equipment. Poured polyurethane BioSeal is easy to clean and sterilize.
Cat. # $/Each
9670-35 9670-36
2,625.00 3,150.00
5604-65
198.00
21
10" 10"
10" 10"
Insulated Gloveboxes
2" of polyurethane insulation ensure stable, efficient temperature control over a wide operating range (-25F to +140F/-32C to +60C) Provide stable operating temperatures in critical applications 304 stainless steel chamber provides a noncontaminating, durable, chemicalresistant enclosure Double-glazed polycarbonate viewing windows provide visibility of work in progress (select partial or full-view design) Includes fluorescent illuminator See facing page for Terras Constant Temperature Control System These double-wall, insulated chambers boost thermal efficiency to create stable process temperatures and decrease the cost of heating and cooling cycles. Both include two 10"-diameter ports, providing ample space for arm motion inside gloves (order gloves separately). Select Full-View or Partial-View front panels. Both models include double-glazed polycarbonate windows.
Insulated Gloveboxes
Outside Dimensions (subtract 4" for I.D.) Front Panel A D E Full Window 28 33 37 Partial Window 31 37 28.25
10" 10"
41 37
35 12.81
43 39
14 14
12 12
14
A. Replacement Glove Port B. Glove Port Cover C. Iris Adapter Air Lock*
Window
Cat. #
120VAC
$/Each Cat. #
220VAC
14,102 1696-05-220 14,459 1696-06-220
Right Side
$/Each Cat. #
Left Side
Cat. #
1696-08A 1696-10A
590.00 569.00
* Air locks feature double-wall constructions but no insulation. Inside dimensions: 12" x 12" x 12" Order desired gloves and temperature control module separately.
22
Shown on Series 300 glove box. See facing page for insulated chambers.
Application Note: Dry nitrogen purging is recommended for low-temperature applications in order to avoid condensation inside the process chamber.
Refrigeration Module
N2 In NitroWatch
Dual Purge
220VAC, 50/60Hz
$/Each
Double-Wall, Insulated Chamber Continuous Low Flow Intermittent High Flow Closed-Loop, CFC-Free Coolant
NitroWatch
Dual Purge
Cat. #
$/Each
120VAC/60Hz 220VAC/50Hz
4320-00 4320-00-220
3,574.00 3,574.00
Glove Ports
Special designs and materials, including oval stainless steel ports and bag-out ports. See page 27.
No. 1672-07
No. 1672-10
No. 1672-27
23
Shown with optional 7"W x 912"H tempered glass viewing window (Cat. # 1702-02, $421)
Glovebox Air Locks* Dimensions (ID): For Glovebox Series 300 (page 12) Series 400 (page 14) Series 500 (page 16) Series 600 (page 16)
Cat. #
3,456 3,456 1702-18C 1702-19C 3,456 1702-31C 1702-32C 3,456 1702-33C 1702-34C
* Part numbers are for an air lock of the specified size with a flange for right or left mounting to the Terra glovebox indicated. (No part numbers in a column indicates that the air lock does not fit that glovebox).
For Series 300 Chamber For Series 400 Chamber For Series 500 Chamber For Series 600 Chamber
24
Right Mount
Cat. #
Left Mount
Cat. # $/Each
120VAC/60Hz 220VAC/50Hz
5401-12A 5401-00A 17,268.00 5401-12A-220 5401-00A-220 17,268.00 Vacuum Control Fittings Kit 5400-22 1,451.00 (Order Vacuum Controller below)
Heating to 300C
Right Mount
Cat. #
Left Mount
Cat. # $/Each
110VAC/60Hz 9602-30A 9602-03A 5,564.00 240VAC/50Hz 9602-30A-220 9602-03A-220 5,564.00 Vacuum Control Fittings Kit 5400-23 1,451.00 (Order Vacuum Controller below: see page 27 for description.)
120VAC 240VAC
1681-75 1681-75-220
2,610.00 2,610.00
D. Vacuum Antechamber
Supports vacuum to 29.9" Hg. Available in plastic for Series 200 Glovebox (see page 10) and aluminum or stainless steel for Series 400 Glovebox (see page 16). .
This cut-out is sealed with a bellow-type diaphragm to allow viewing of a stereo microscope positioned inside any of Terras stainless steel gloveboxes. Standard cut-out size is 8"W x 6"H. Specify size and location.
Cat. # $/Each
G
G. Tilt-Up Viewing Module
includes modification of plastic or stainless steel glovebox. Frame is stainless or powder-coat steel; window is static-dissipative PVC. Must be ordered together with affected glovebox.
Single Chamber Cat. # $/Each Glovebox Material 3305-20 1,943.00 Plastic: SS frame 2,258.00 Plastic: powder-coat frame 3305-22 1684-92 1,875.00 Stainless Steel Twin Chamber
Cat. # $/Each
1681-53
234.00 Swings open for easy access. Dual piston mechanisms hold the window securely in open. Price
25
B
Shown: One-piece model available for 8"-dia. ports
8 9 10
13" Sleeve
Cat. # $/Pair
8 9 10
Lightweight (.015")
Cat. #
Heavyweight (.030")
$/Pair
$/Pair Cat. #
1671-15
316.00 1671-16
362.00
F
Neoprene Sleeve Sections 22" long
$/Pair Cat. # $/Pair
8 9 10
67.00 1670-17 133.00 67.00 Sleeve has G.U.S. 67.00 Connector (see above)
E. Neoprene Gloves for 10"-diameter ports One-Piece Bonded Neoprene Gloves 13" Neoprene Dry Box long, unlined textured grip Hand Glove
Size
Cat. # $/Pair Cat. #
8 9 10
18.00 1690-92 188.00 18.00 with G.U.S. connectors (see above) 18.00
8 9 10
1671-17
Select one-piece fully-dipped glove or two-piece sleeve/glove combinations. Two-piece units provide the convenience of quick, easy glove replacement while leaving the sleeves attached to the glovebox. Sleeve and glove are joined by a Glove-OverSleeve (GOS) connector, which ensures an air-tight, liquid-tight $/Pair seal and easy glove changeout. Length: 32" total (22" sleeve 353.00 only, tapering to a 4"-diameter cut-off). Sleeve thickness: 0.015".
26
New larger-diameter ports provide a wider range of motion to improve comfort and productivity!
1694-52 194.00
Optional port cover seals against port to allow glove replacement without compromising the internal environment Optional iris port seals against port for easy access by operators with gloved hands
Iris Port Includes iris port and port retaining ring. Mounts to standard 10"-diameter port. Price is for one iris port.
Cat. # $/Each
Port Cover Mounts to a standard 10"-diameter port. Price is for one cover.
Cat. # $/Each
1694-53
198.00
1694-54
294.00
Custom materials and configurations, including Delrin ports and Viton or Buna-N O-rings: TerraUniversal.com
No. 1672-07
No. 1672-10
No. 1672-27
No. 1694-43
PVC Ports
Diameter
Cat. #
Polypropylene Ports
Round
$/Each
Diameter
Cat. #
Round
$/Each Cat. #
Oval
$/Each
Round
$/Each Cat. #
Oval
$/Each
223.00
$/Each
Bag-Out Port 9" diameter. Other sizes available. Bags: Package of 10 12-mil PVC bags for 9" port
1694-43 1694-44
260.00 104.00
27
Gas In
Cat. #
$/Each
1603-57 1603-58
2,715.00 3,030.00
NitroWatch
Dual Purge
B. NitroWatch
Operates in tandem with the Dual Purge System to maintain user-determined humidity level (down to 0%RH).
Cat. # $/Each
9500-00A 9500-02A
866.00 515.00
C. DewWatch Hygrometer
Internal Humidity Monitor Purge Control
DewWatch
Extends shelf lives of stored materials by controlling moisture and moisture-related defects
A high-performance alternative to the NitroWatch, this unit monitors and displays dew/frost points between -80 and +20 degrees C. Sensor is sensitive to 0.5 PPM(v) of moisture.
Cat. # $/Each
Gas In
1401-07 1401-12
3,240.00 1,589.00
Dual Purge
DewWatch: Humidity Monitor & Control (Dual Purge System, RB valve required)
D
Gas One Gas Two
Gas Mixer
Dual Purge
6706-01
15,061.00
Automatically relieves pressure build-ups to ensure safe operating conditions with Terras gas control systems.
E
Regeneration Module Fan
Controller
F
Catalytic Converter Molecular Sieves HEPAFilters
1606-60
DryCycler Performance, based on an 18 cu. ft. glovebox
180.00
$/Each
1600-60B
94.00
28
Cat. #
$/Each
Humex
Humex 2
Humex (110VAC, 50/60Hz) 9081-00 4,079.00 Humex 2 (110VAC, 50/60Hz) 9081-02 2,360.00 Humidity Sensor (installed) 9500-02A 515.00
NitroWatch
Oxygen Analyzer
Dual Purge
Quick response zirconia oxide diffusion sensor Measurement Range: Autoranging from 0.01 ppm to 100% Accuracy: 1% or better of measured value in ppm Repeatability: 0.2% of measured value Response Time: 90% of step change within 5 seconds Power: User selectable 110/220VAC, 50/60Hz Includes connection to specified glovebox.
Cat. #
$/Each
2005-97
6,917.00
9500-10
195.00
J
To Order, Call 714-578-6000 or Fax 714-578-6020 Vol. 3 No. 15
29
Nitrogen Generators
Purity vs. Flow Rates (@100 PSI inlet feed, 72F*) Model 99% No. 2700-12A 7.4 CFH No. 2700-11A 49.0 CFH No. 2700-09A 126.0 CFH Purity 98% 10.2 CFH 65.0 CFH 180.0 CFH 97% 12.5 CFH 75.0 CFH 223.0 CFH
* Higher flow rates can be achieved with higher feed temperature (see Terras process gas heater, No. 9450-00).
Outer Case
End Plate
Oxygen-Enriched Air
Dryex 10
Hollow Fibers Feed Air O-Rings
Nitrogen Generator
No. 2700-11A No. 2700-12A
Separation Membrane Reliable, Hassle-Free Nitrogen Source!
B
Comparative Guide to Terra Gas Dryers
Product Design Type Outlet Flow Capacity Service Requirement
Dryex 80
Prefilters Included
Overall Dimensions
Recommended Application
Cat. # $/Pair
Membrane See performance chart above Membrane Membrane 420-900 SCFH 54-105 SCFH @ 100 PSIG
Yes (micro-fiber& coalescing) Yes (micro-fiber & coalescing) Yes (micro-fiber & coalescing)
Gloveboxes, desiccators & N2-based process equipment in labs where N2 is preferable to dry air Low-humidity applications (in gloveboxes or desiccators) where clean, dry air is acceptable Ideal source of purged gas in moisture-sensitive storage and processing applications
110VAC
$/Each Cat. #
220VAC
$/Each
30
Filtration Modules
Ideal for analyzing, mixing and packaging toxic pharmaceuticals and other chemical powders HEPA or ULPA filters remove sub-micron particles from the glovebox to ensure an ultra-clean processing environment
In-House Exhaust
Closed Loop Series 300 Stainless Steel Glovebox (No. 1694-04C) with:
HEPA Filter Fresh Air Intake Purified Air
Open Loop
HEPA Filter Blower
HEPA Filter
Particle-Free Air
Air Lock
Open-loop filtration module Air Lock Hinged Viewing Window Glove and Sleeve Combination Hinged Glove Port Covers
Closed-Loop Filtration Module for Continuous Recirculation Includes a 460-CFM impeller blower, mounted in a 304 SS housing, that draws air through an inlet HEPA, ULPA or charcoal filter. HEPA and ULPA filters remove particulates, aerosols, spores and other contaminants to ensure a clean process environment. The charcoal filter removes common organic vapors. A 4-position PVC diverter valve determines the percentage of fresh make-up air entering the chamber: either 100% (no recirculation); 0% (complete recirculation); or 50% (half fresh, half recirculated). Pipes are 2"-dia. PVC (other sizes and materials available).
Closed-Loop Module
For Continuous Filtration
Cat. # $/Each Cat. #
Open-Loop Filtration Module for Safe Indoor Exhausting Includes a 460-CFM impeller blower, mounted in a 304 SS housing, that draws air through an inlet filter into the glovebox. This filter (HEPA or ULPA) removes particulates, aerosols, spores, and other contaminants. A HEPA or ULPA filter removes contaminants from the exhaust for indoor release. Both filters are enclosed in a disposable acrylic housing for safe, easy handling and disposal. Select HEPA or ULPA filters (2 required). Powder Containment Filter Encases 12" x 12" x 3" HEPA or ULPA filter inside an acrylic containment case for safe handling and disposal of filter containing pharmaceutical powders or other hazardous dust. To replace filter, simply remove and bag inner case. Outer housing includes 4"-dia. x 3"H flange for connection to in-house ventilation system does not include blower.
Cat. # $/Each
Open-Loop Module
For Safe Indoor Exhausting
$/Each
1684-81
Corresponding Filters
1,719.00 257.00
* These filters are encased in an acrylic housing for safe handling and disposal.
Internal Mount Recirculating Filtration Module Ideal for process gas environments! This module continuously circulates process gas through a HEPA or ULPA filter to remove sub-micron particles, producing cleanerthan-Class 10 conditions inside the glovebox. Includes dual 68 CFM motorized impellers for rapid filtration cycling. Price includes installation inside specified Terra glove box. Select desired filter separately. 120VAC, 50/60Hz (220VAC models available).
Perfect for nitrogen-purged chambers
2100-33
168.00
(14"W x 12.5"D x 16"H; order 210031 HEPA or 2100-32 ULPA filter module separately) Filter Modules containment case)
Cat. #
(including
$/Each
Cat. #
$/Each
Filters
HEPA ULPA
2100-31 2100-32
143.00 153.00
31
Vacuum Chambers
See specifications/ordering chart below. A. High-Capacity Chamber (see chart below) Ideal for degassing large assemblies. Powder-coated steel chamber with 1"-thick aluminum door. Includes 1"-thick polycarbonate viewing window, piping, fittings and solenoid valve for convenient control (order pump and vacuum controller separately). 18"W x 48"L stainless steel shelf creates a convenient platform 4.5" above chamber floor.
Powder-Coated Steel Stand Cat. # Raises chamber shelf to 34.6" above floor level 3404-04
$/Each
1,132.00
A A
B. Stainless Steel Chamber (see chart below) Double-wall construction; includes 8" x 8" tempered glass viewing window and dual metering valves and 0-30" vacuum gauge. C. Aluminum Chamber (see chart below)
1"-thick walls; includes dual metering valves and 0-30" Hg vacuum gauge. Powder-Coated Steel Stand Cat. # $/Each Raises chamber 17"; includes casters. 1590-61 568.00
E J. Acrylic Chambers
See chart below.
Ideal for degassing and transporting small parts. Designed for continuous pump operation (order below).
Cat. #
$/Each
Two required for direct connection to pump, or one if connecting Vacuum Controller.
Vacuum Gauge (installed)
5235-09
160.00
5235-10
196.00
Vacuum Controller Recommended for all continuous vacuum applications. For Full Vacuum (to 29.9" Hg). Select appropriate Turnkey Connection Kit below.
120VAC, 60Hz 220VAC, 50Hz 1681-75 1681-75-220 2,610.00 2,610.00
D K
E J
Vacuum Chambers
Type
Connection Kit Includes all connections, vacuum, solenoid, turnkey installation and testing charges.
For Type AC Chambers For Type DJ Chambers 5400-25 5400-24 1,451.00 1,451.00
Max. Vacuum
Cat. #
$/Each
A B C D E F G H I J
49L x 30 dia. 13 x 15 x 14 31.4 x 25.4 x 18.8 12"-dia. x 14.5 17 x 11 x 12.5 13 x 13 x 7.5 9 x 9 x 9.5 13 x 13 x 10.5 17 x 17 x 13.5 26.5 x 11 x 12.5
48L x 26 dia. 8 x 12 x 8 30.4 x 24.4 x 17.8 11"-dia. x 13.5 14 x 8 x 9.5 10.5 x 10.5 x 4.5 6 x 6 x 6.5 10 x 10 x 7.5 15 x 15 x 11.5 11 x 8 x 9.5
29.9" Hg 29.9" Hg 29.9" Hg 29.8" Hg 29.9" Hg 29.9" Hg 29.9" Hg 29.9" Hg 29.9" Hg 29.9" Hg
3404-03 3404-00 1590-60 5235-08 5235-00A 5235-01A 5235-02A 5235-03A 5235-04A 5235-06A
21,830.00 3,053.00 10,444.00 2,147.00 2,045.00 1,527.00 1,318.00 1,787.00 2,115.00 2,319.00
K. Techni-Dome Vacuum Desiccator The Techni-Dome Vacuum Desiccator offers up to four times more volume, 65 liters (4,000 cu. in.) than most other large benchtop unitsenough for items up to 45cm (18") tall or wide. Polycarbonate construction is chemical resistant and easy to clean. Safely support vacuum level to 29" Hg (737 mm) at room temperature for 24 hours. Includes stopcock with Teflon plug and two polypropylene shelves. Size: 22" diameter.
Cat. #
$/Each
605.00 89.00
32
Environmental Chambers
C. Caron Environmental Chambers
Refrigerated Incubators provide precise temperature control from 5C to 60C. Stability Chambers add a relative humidity system with solid-state humidity sensor and controller that allow humidification and dehumidification. Models below are 115VAC; 230VAC also available
Refrigerated Incubator Stability Chamber $/Each Cat. # $/Each Capacity Cat. # 10 cu. ft. 5757-03 11,700.00 5757-00 11,875.00 30 cu. ft. 5757-05 14,947.00 5757-02 17,141.00
B
No. 5321-39
No. 5757-05
E
HEPA Filter Zone Heaters
No. 2148-10A
1 2 3
Rear Wall
* Order desired Fan/Filter Unit (HEPA or ULPA) separately - one 2' x 4' unit required per access panel.
A/C Module
Humidifier
AC/Heater
2148-10A 2148-11
22,365.00 18,375.00
Top View
2F/ 3% RH Stability
33
This economical system provides a laminar flow of HEPA-filtered air to meet the most critical contamination requirements. It incorporates industry-leading 48 dBA blowers for quiet, low-vibration operation. The all-304 stainless steel or powder-coated steel is cleanroom compatible and easy to clean and sterilize. An optional motorized front shield extends 3"25" above the work area for more effective particle control. Fluorescent lighting is included; for complete line of options, visit TerraUniversal.com.
Motorized Sliding Shield* extends 3"-25" below hood to restrict access to work area and improve system efficiency. Rated for millions of operations!
Modular Cleanroom Drawers* select stainless steel or plastic Work Surfaces* available in many sizes and materials. Two-piece design isolates FFU vibration. *System option
91"
Filter/Fan Units (FFUs) 115VAC, 60Hz* See chart below for quantity required
Nominal Avg. Flow Dim. @ 90 FPM HEPA FFU
Cat. # $/Each Cat. #
69"
Ionizing Bar**
$/Each
width x length 2' x 4' 650 CFM 2' x 3' 480 CFM 2' x 2' 360 CFM
32"
* ULPA versions also available. For 220VAC model, add -220 to the part number. ** See page 25 for specifications. Includes installation kit.
35"
Side Panel*
304 Stainless Steel (Order FFUs and Benches separately)
120VAC, 50/60Hz Cat. # 220VAC, 50Hz Cat. #
Sliding Shield
Static Dissipative PVC
WxD
$/Each Cat. #
$/Each Cat. #
$/Each
52 49 48 x 30 76 73 72 x 30 100 97 96 x 30
* Replaces standard plexiglass side panels (each station requires two). Static-Dissipative PVC is recommended on units equipped with optional dissipative sliding shield.
(inches)
A B WxD
Conductive Top
$/Each Cat. #
$/Each Cat. #
$/Each Cat. #
$/Each Cat. #
$/Each Cat. #
52 64 76 100
49 61 73 97
48 x 30 60 x 30 72 x 30 96 x 30
34
Terras Horizontal Laminar Flow Station provides an economical work environment that exceeds the most stringent contamination requirements in the pharmaceuticals, biotech, electronics and semiconductor industries. Powerful filter/blower modules provide a back-to-front laminar flow of filtered air across the work surface. The adjustable multi-speed, directdrive blowers let you adjust air speed (90-130 feet per minute) to meet your requirements while providing low noise and vibration levels. For enhanced air-stream control, this station also features return ducts along the front and side edges of the work area. These ducts enhance system efficiency by reducing backwash, the most common source of turbulence in a laminar flow system.
Petcocks
Cat. # $/Each
Horizontal Laminar Flow Station (order filters separately) Overall Work Area No. FFUs Horizontal Laminar Flow: Interior Material** Dimensions* Dimensions* required 304 Stainless Steel Electropolished SS Cat. # $/Each Cat. # $/Each (W" x D" x H") (W" x D" x H") (order at right) 9620-63 8,667.00 9620-66 10,655.00 52 x 44 x 63 48 x 30 x 28 (1) 2' x 4' 9620-64 10,456.00 9620-67 12,031.00 76 x 44 x 63 72 x 30 x 28 (2) 2' x 3' 10,849.00 9620-68 12,945.00 88 x 44 x 63 84 x 30 x 28 (1) 2' x 4' & (1) 2' x 3' 9620-65
Note: All models are 115VAC, 50/60Hz. For 220VAC, 50Hz, add -220 to the part number. * All dimensions are nominal. ** Work top and side panels are of the material indicated. All exterior surfaces are powder-coated CR steel. *** 99.99% efficient @ 0.3 micron particles. ULPA filters also available.
35
52 76 100
2001-65 2001-65-220 5,462.00 2001-68 2001-68-220 4,010.00 2001-66 2001-66-220 6,163.00 2001-69 2001-69-220 4,526.00 2001-67 2001-67-220 7,098.00 2001-70 2001-70-220 5,261.00
Filter/Fan Units Includes HEPA filter rated 99.99% efficient @ 0.3 m particles. All models are 120VAC, 220V models available.
Nominal Power Avg. Flow Dim. @ 90 FPM
width x length Cat. #
HEPA FFU
2' x 4' 110VAC 644 CFM 2' x 3' 110VAC 477 CFM * Order FFU separately.
6601-24-H 6601-23-H
734.00 643.00
Softwall Panel Kits 40 mil curtains are 60" long. Each kit includes 2'-wide side panels and appropriate length to cover the rear of the station.
Cleanroom Vinyl Anti-Static Vinyl
Cat. # $/Each Cat. # $/Each
1330-00A 1330-05A
Cat. #
Fluorescent Light
115/277VAC, 50/60Hz 1870-10 1870-11 237.00 (order two for 73" booth) 264.00 (order one for 49" booth)
36
Terra offers several bench-top systems to meet a variety of application requirements. Please visit TerraUniversal. com for complete operating specifications and pricing on dozens of standard configurations.
A. Universal Hood
Completely modular design lets you configure an economical clean bench to your requirements, in acrylic, polypropylene, dissipative PVC or stainless steel. Single and twin hoods available. Options include two-piece stand that isolates blower vibration perfect for high-magnification work. System shown: acrylic hood No. 1715-10A ($925), with blower-filter module No. 1715-51 ($757). Includes swing-vane anemometer to monitor air speed. Select HEPA or ULPA filter.
Acrylic Static Dissipative PVC Nondissipative PVC Stainless Steel (Dissipative PVC)
Horizontal Flow
Acrylic Static Dissipative PVC Nondissipative PVC Stainless Steel (Dissipative PVC)
* Unless indicated in parentheses, shield is made of the same material as the hood.
Cat. # $/Each
Fan/Filter Module
6601-24-H 730.00
24" x 48", with 99.99% efficient HEPA filter (rated @ 0.3 m particles)
Other models available at TerraUniversal.com 34" depths All-polypropylene models 2', 3' and 6' widths Spill trays
C
To Order, Call 714-578-6000 or Fax 714-578-6020 Vol. 3 No. 15
37
This Exhaust Fume Hood is designed to afford you maximum economy and flexibility in designing the system thats right for your application. The frame is fabricated from welded 112" x 3" powder-coated or 304 stainless steel to ensure sturdy support for the exhaust fume hood. The frame also isolates the hood (and any vibrations the hood causes) from the work surface. A 6" round discharge allows easy connection to your in-house exhaust system to provide the internal negative pressure necessary to safely remove fumes from the work surface. Room Air
Filtered Air The front of the unit features an easy-glide Contaminated sliding shield Air (also made of transparent PVC mounted in a powder-coated aluminum frame). The Ductless Exhaust Purification Hoods include an explosionproof blower installed inside the hood and provisions for mounting purification filters and particle filters that safely remove a wide array of fumes to allow safe indoor release of exhaust. Room Air
34.75"
66.75"
32"
Dimensions
Overall Length A Inside Length B Optional Work Surface
Powder-Coated CR Steel
$/Each Cat. #
$/Each Cat. #
$/Each Cat. #
* Supporting frame is made of powder-coated steel tubing; stainless steel frame is available on a custom basis. ** Order Purification Filters separately. These systems include a 3/4 HP explosion-proof blower mounted for negative-pressure venting.
Ductless Exhaust
Purifiers
These horizontal or vertical flow systems ventilate and purify fumes generated by such operations as soldering, chemical mixing and pharmaceutical packaging, allowing safe indoor release of exhaust. Hoods are available in five materials, including stainless steel and dissipative plastic, in sizes from 28" to 56" wide. Options include fluorescent lighting, air flow meters, and work surfaces, see TerraUniversal.com for details. Horizontal Exhaust Fume Hood Model shown: acrylic hood No. 1682-87B with HEPA filter/blower module No. 1650-31. System dimensions: 42"W x 43.5"D (hood and blower) x 28"H Vertical Exhaust Fume Hood Model shown: acrylic hood No. 1683-29B with HEPA filter/blower module No. 1650-41. System dimensions: 42"W x 30"D x 41.5"H (hood and blower)
38
* Includes filter/blower enclosure and spill tray made of white polypropylene. Order filter(s) separately. ** Includes Fluorescent Illuminator (110VAC). Add -220 to the part number for 220VAC *** Acrylic is damaged by alcohol and other cleaning agents.
Cat. #
1716-00A 1681-02
Ideal for distillation and other operations 450.00 with large glassware 260.00 or equipment.
$/Each
High capacity blower maintains air speed >100 ft./min. with 15" of vertical working clearance!
2900-20
3,339.00
Quick-release filter housing replace filter from above or from inside enclosure!
High capacity blower maintains air speed 181 ft./min. with 5" of vertical working clearance!
39
A
A. Basic Laboratory Hoods
By-pass design maintains stable face velocity, and vapor-proof or explosionproof blower provides safe ventilation. Available in 47 and 70" widths, with a complete range of system options. Model shown: 3646-05.
A. Basic 47 Laboratory Hoods: 47"W x 25"D x 53"H
Incandescent Lamp Blower Motor Equivalent Resistance Shipping Weight
Cat. #
B
B. Fiberglass 30 Laboratory Hoods
Powder epoxy-coated exterior is easy to clean; one-piece molded fiberglass interior resists most chemicals. By-pass design maintains stable face velocity, and pivoting air foil maximizes containment. Available with onboard exhaust blower. Model shown: 3646-49.
Work Surface
115VAC, 60Hz
$/Each Cat. #
220VAC, 50Hz***
$/Each Cat. # $/Each
10" dia 12" dia. lbs./kg 1/3 HP 100' 250' 370/168 Vapor Proof 1/2 HP, EP Explosion-Proof** 100' 250' 375/170 Basic 70 Laboratory Hoods: 70"W x 25"D x 53"H 3/4 HP Vapor Proof 45' 100' 450/204 3/4 HP EP Explosion-Proof** 45' 100' 455/206
3,395.00 3646-02 928.00 4,051.00 3646-02 928.00 Work Surface 4,560.00 3646-07 1,275.00 5,005.00 3646-07 1,275.00
* Maximum length of straight duct to achieve 100fpm face velocity. ** Bulb not included on explosion-proof models. *** International electrical configuration. 48"/72"W x 30"D x 1.25" thick black epoxy-coated steel
Yes None
** Maximum length of straight duct to achieve 100fpm face velocity *** International electrical configuration. Cat. # $/Each Cat. # $/Each Cat. # $/Each 48"/72"W x 30"D x 1.25" thick black epoxy3646-48 3,199.00 3646-48-220 3,283.00 3646-50 558.00 coated steel 3646-49 2,789.00 3646-49-220 2,280.00 3646-50 558.00 1/10HP (120V); 1/3 HP (220V) 220VAC, 50Hz***
40
E
C. Purifier Logic Class II Biosafety Cabinets
Purifier Logic Biosafety Cabinets meet or exceed all NSF standards, including 99.99% efficient HEPA filters, nominal inflow of 105 fpm, and all positivepressure ducts surrounded by negative pressure plenums. It includes an angled, fully closing, counterbalanced tempered glass sash for closer, more comfortable viewing, and a curved inlet grille that provides a comfortable forearm rest. Bright, glare-free fluorescent lighting with timer and solid state ballasts provides 90-100 footcandles at the work surface, exceeding NSF standards. Electronically Commutated Motor (EMC) Technology precisely controls airflow without the need for airflow sensors. The motor is programmed to consistently deliver the precise volume of air required, even as filters load. Its line-of-sight LCD display terminal provides instant feedback that the cabinet is operating properly, and a Filter Remaining bar graph eliminates filter change guesswork. Best of all, the reliable ECM is rated for 50,000 hours of operationover three times the life of other BSC motors. Intelligent features enhance safe, efficient, cost-saving operation. Smart-Start lets you program start-up and shut-down of the blower and lights when the sash is opened or closed, assuring consistent operation and saving time. Night-Smart idles the blower at 30% speed or less when the sash is fully closed to help maintain a particulate-free environment inside the cabinet during periods of non-use.
Cat. # $/Each
F
D. Paramount Ductless Enclosures
These self-contained workstations require no ducting to the outside, making them ideal for applications that require portability or flexible installation. An air foil enhances fume containment. Other sizes and accessories, including filters, at TerraUniversal.com
Work Space Dimensions 33.6" W x 23.4" D 33.6" W x 23.4" D 115VAC, 60Hz
Cat. # $/Each Cat. #
230VAC, 50Hz
$/Each
3647-05 3647-07
4,538.00 9,305.00
3647-05-220 3647-07-220
4,621.00 9,387.00
3645-45 3645-27
6,780.00 658.00
41
Stainless steel
D
B. Stainless Steel C. Vibration-Free Laminate Top
$/Each
Vibration platform
Work Benchesselect desired top (all bases feature a white powder-coated finish)
Base Type (Epoxy Finish) Width
(Depth=30") 48 60 72 48 60 72
A. Nonconductive Laminate
D. Vibration-Free Platform
Work Surface
Cat. #
$/Each Cat. #
$/Each Cat. #
Cat. #
Telescoping A Base
25"-34"
Recessed C Base
30"
2,178.00 1,789.00 21.75 x 18.25 x 3 1580-02 1580-03 2,468.00 23 x 24 x 3 1,821.00 1,835.00 Visit TerraUniversal.com for other bench styles: Electropolished stainless steel Acid-resistant polypropylene tops Dozens of standard sizes
E
E I. Class 100 and Static Control
F
Specifications
Height Color
Cat. #
G
Class 100 Static Control
E.
$/Each Cat. #
H
F.
$/Each Cat. #
I
Class 100
G.
$/Each Cat. #
H.
$/Each Cat. #
I.
$/Each
Clean vinyl meets Class 100 Black 2802-61 504.00 2802-67 464.00 Desk particle requirements. StaticBlue 2802-62* 504.00 2802-68* 464.00 Control chairs feature dissipative Black 2802-64 510.00 2802-70 467.00 vinyl, conductive casters, and Bench Blue 2802-65* 510.00 2802-71* 467.00 grounding chains. * Quick ship models usually ship within one week!
42
3504-16 3504-17
2,536.00 2,637.00
3504-04 3504-05
2,952.00 3,052.00
Ergonomic Upholstered #2801-66 Urethane #2806-48 Ergonomic ESD #2802-32
J
J N. Laboratory Chairs
K
Specs
Cat. #
L
Ergonomic Upholstered Chairs*
K. Standard
M
L. Large Backrest
$/Each
N
Specs Urethane Chairs**
Height
Cat. #
ESD Chair
N.
$/Each
M.
$/Each Cat. #
Select from our large assortment 316.00 Desk 2806-49 274.00 2802-31 Desk Black 2801-01 349.00 2801-33 301.00 2801-65 of Laboratory Chairs. Types J-L 316.00 2806-45 298.00 2802-32 Blue 2801-02 349.00 2801-34 301.00 2801-66 are upholstered chairs built Bench Black 2801-05 396.00 2801-37 303.00 2801-69 320.00 Bench 2806-48 319.00 2802-33 with ergonomic benefits. Types 320.00 2806-51 338.00 2802-34 Blue 2801-06 396.00 2801-38 303.00 2801-70 M and N meet durability and * Available in Grade 2 Vinyl or Grade 4 Breathable Nylon. Visit TerraUniversal.com for more color options. ** More configurations available on the website. budget needs.
$/Each Cat. #
$/Each Cat. #
43
Convert any space into a controlled environment at a fraction of the cost, in a fraction of the time!
Modular Cleanrooms
Free-standing, all-steel structures create sturdy, versatile clean processing solutions that meet cleanliness requirements to Class 10 (ISO 3). Whatever your application, Terra delivers a pre-tested, turnkey system.
Save Time!
Terras online QuickQuote Planner configures a room to your specifications: www.TerraUniversal.com Just click on Modular Cleanrooms
Hardwall Designs
Acrylic or static-dissipative rigid PVC panels for full visibility Steel support frame spans up to 20 feet without internal pillars or external supports Mirror-finished stainless steel trim creates a showcase exterior A/C and humidity controls Available raised floors optimize laminar airflow
Softwall Designs
Portable, expandable, easy to assemble and disassemble Curtain panels and parting strip shields, in anti-static cleanroom-grade vinyl Rigid steel support frame requires no ceiling supports Casters available
44
45
Seamless Unique design eliminates cracks, corners and other contaminant traps! Lipless Easy material transfer with no clearance obstruction Easy to Clean Ultra-smooth internal surfaces Easy to Sterilize 304/316 electropolished SS; removable doors can be steam sterilized Double-Wall, Sealed Construction adds rigidity and houses interlock and standard or custom utilities without compromising the ultra-clean design
46
Electropolished SS SmartDesiccator
Cat. #
$/Each
1911-02B
Cat. #
2,941.00
$/Each
1600-60B
94.00
Acrylic**
Dissipative PVC
$/Each Cat #
$/Each Cat #
$/Each Cat #
12" x 12" x 13.25" 17.125" x 18" x 13.25" 22.625" x 18" x 13.25" 22.625" x 24" x 13.25
10.75" x 10.75" 10.25" x 11.5" x 12" 15.875" x 10.75" 15.375" x 17.5" x 12" 21.375" x 10.75" 20.875" x 17.5" x 12" 21.375" x 10.75" 20.875" x 23.5" x 12"
* Performance specifications at TerraUniversal.com ** Acrylic is damaged by alcohol and other cleaning agents.
47
Cleaning
Ultrasonic Cleaners
These Branson CSA-listed cleaners provide thorough, safe cleaning of smalland medium-sized parts. Models below feature heat controls with digital timer and degas function, which allows immediate use at maximum efficiency. All operate on 115VAC; 230VAC and other heating and timer configurations are also available.
Tank Capacity 0.5 gallons 0.75 gallons 1.5 gallons 2.5 gallons 5.5 gallons
Cat. # $/Each
110VAC 2005-55
629.00
4545-00A
1,975.00
Ultimate Pressure
Pump Speed
Cat. #
$/Each
Shakers
MaxQ 2000
These Thermo Scientific shakers operate in continuous or timed mode for applications including cell cultures, bacterial suspensions, solubility studies, staining, hybridization and more.
Cat. # $/Each
Analog
5322-00
1,373.00
5322-62
887.00
5322-68 1,840.00
48
Cleaning
Ultrasonic Cleaners
These Branson CSA-listed cleaners provide thorough, safe cleaning of smalland medium-sized parts. Models below feature heat controls with digital timer and degas function, which allows immediate use at maximum efficiency. All operate on 115VAC; 230VAC and other heating and timer configurations are also available.
Tank Capacity 0.5 gallons 0.75 gallons 1.5 gallons 2.5 gallons 5.5 gallons
Cat. # $/Each
2631-00 327.00 2617-00 431.00 2618-00 667.00 2619-00 853.00 2637-00 1,615.00
4545-00A 1,975.00
Ultimate Pressure
Pump Speed
Cat. #
$/Each
Shakers
MaxQ 2000
These Thermo Scientific shakers operate in continuous or timed mode for applications including cell cultures, bacterial suspensions, solubility studies, staining, hybridization and more.
Cat. # $/Each
Analog
5322-00 1,373.00
5322-62 887.00
5322-68 1,840.00
48
Exceptionally high level of quality due to rugged housing construction The CPA Series offers high quality thanks to its Ease of use eliminates operator error rugged housing construction of high-grade materials. Standard applications include weighing in %, net-total and ensures accuracy of results The ED Series of Extend Analytical Balances, which formulation, dynamic weighing or animal weighing, come in weighing capacities of 120 g and 220 g and mass unit conversion by toggling, and counting. Starting at $1,129.00 are operated through a language-driven user interface, ensure high thermal stability and extremely fast response times.
Cat. #
5701-15 5701-16
1,729.00 2,000.00
$/Each
Just the perfect features for everyday use in your laboratory Five-decimal-point readouts in just Portable, dependable, accurateA The TE Series of Analytical Balances from Sartorius eight seconds star performer that can go anywhere Rugged and compact, Talent Portable TE Balances Scorching speed is what puts the Sartorius ME5 at comes in two weighing capacities, 60 g and 210 g, have just the right features for everyday use in the the top of the class. Operation of the ME draft shield and both the weighing pan and weighing chamber are laboratory, including easy-to-read, high contrast is also designed for fast weighing. Controlled by constructed of high-grade stainless steel. Weighing Capacity Cat. # $/Each displays, fast response times and complete ease palm-operable keys or by custom programming. 60 g 5701-18 1,498.00 of operation. Weighing Capacity Cat. # $/Each
Starting at $536.00 5.1 g 5701-01 15,363.00 210 g 5701-17 1,958.00
B. MA100 Series
A
Includes automatic and timer modes.
B
Moisture measurement range: 0.05% to 100%. Weighing capacity: 100 g (0.1mg resolution).
This is the only IR dryer that features a built-in weighing system with 0.1-mg resolution and an EC typeapproval certificate. Its Swift Parameter Adjustment adapts operation to the results of an available reference method and saves it as a drying routine.
Cat. # $/Each
Halogen Heating Element 5701-59 5,285.00 Ceramic IR Heating Element 5701-60 5,285.00
50
5102-02 5102-03
6,426.00 6,324.00
8000-11
Full line of microplate readers, shakers, and incubators available!
5,206.00
51
E
Ideal for finger cots
G
Easy-access wiper dispensing*
J
Item (see photos) Dimensions
W x D x H, in
K
Acrylic
Cat. #
Static-Dissipative PVC
$/Each Cat. # $/Each
A. SneezeGuard B. C. D. E. F. G. H. I. J. K. Wall-Mount Glove Dispenser (single) Wall-Mount Glove Dispenser (triple) Benchtop Glove Dispenser* File Holder (4 slots) Dispensing Bins Apparel Dispenser Multi-Chamber Dispenser Wiper Dispenser (enclosed) Wiper Dispenser (open top) Safety Glasses Dispensers Holds: 8 (all are 5.75"D) 12 16 Other sizes available 16 call Terra! 24 24 *Now available in stainless 32 steelsee facing page. 48
7.12 x 7.75 11 x 11 16.5 x 12.5 x 17 16 x 11.5 x 12 12 x 6 x 6 10.5 x 5 x 15 5 x 6.25 x 8.25 48.5 x 24.5 x 36 15.75 x 8 x 13 12 x 9 x 6 10.5 x 14.5 x 4 6.75 x 17 9.75 x 17 6.75 x 28.25 13.13 x 14.375 9.75 x 28.25 19.5 x 17 13.13 x 28.25 19.5 x 28.25
1601-50 1600-25 4950-72 4005-56 4951-03 4005-25 4950-12 4951-06 4005-51 4951-01 4950-93 4950-45 4951-15 4951-17 4951-19 4951-21 4951-23 4951-25 4951-27
13.00 16.00 222.00 247.00 77.00 89.00 129.00 3,304.00 328.00 84.00 60.00 244.00 318.00 439.00 439.00 570.00 570.00 789.00 1,027.00
1601-51 1602-75 4950-74 4005-57 4951-04 4005-23 4950-13 4951-07 4005-50 4951-02 4950-94 4950-46 4951-16 4951-18 4951-20 4951-22 4951-24 4951-26 4951-28
26.00 29.00 299.00 372.00 116.00 159.00 224.00 5,948.00 488.00 149.00 116.00 321.00 417.00 578.00 578.00 750.00 750.00 1,040.00 1,348.00
52
A
Holds up to four petri dishes
L
Protects fragile pipette tips
B
Models for loose or packaged gloves
M
Clean, dry benchtop storage
C
Bench or wall-mount glove dispenser
E
Bootie dispenser
Wiper dispenser
F
Swab dispenser
Convenient racks, dispensers and tools all feature a durable antimicrobial coating to reduce infection rates and product contamination! Dozens of other models at TerraUniversal.com
Electropolished 304 SS
Cat. # $/Each
A. Glove Dispenser, Wall-mount B. Glove Dispenser, Wall-mount C. Glove Dispenser D. Wiper Dispenser E. F. G. H. I. J. K. L. M. N. O. P. Q Bootie Dispenser Swab Dispenser Glove Dispenser Glove Dispenser Glove Dispenser Glove Dispenser Glove Dispenser Petri Dish Incubation Tray Pipette Support Rack Electrophoresis Gel Plate Drying Rack Microliter Pipettor Racks Microliter Pipettor Racks SS Clipboard
P
Includes anti-microbial coating for germ control!
4951-30-2AM 4951-31-2AM 4951-32-2AM 4951-33-2AM 4951-50-2AM 4951-40-2AM 4951-41-2AM 4951-45-2AM 4951-35-2AM 4951-51-2AM 4951-52-2AM 4951-53-2AM 4951-54-2AM 4951-55-2AM 4951-85-2AM 4951-67-2AM 4951-64-2AM 4951-81-2AM 4951-83-2AM 1350-00A-2AM
985.00 1,205.00 930.00 1,205.00 119.00 123.00 128.00 143.00 59.00 58.00 79.00 51.00 57.00 72.00 48.00 64.00 70.00 70.00 59.00 61.00
G. K.
4951-51A-2
53
800 S. Raymond Ave., Fullerton, CA 92831 USA Tel: 714-578-6000 Fax: 714-578-6020
TerraUniversal.com info@TerraUniversal.com
Update Mailing Information at www.TerraUniversal.com Select Contact Us and enter your name and contact ID (printed above) on the Update Mailing Information e-mail form.
LAMBA Bio+ Spectrophotometer from Perkin Elmer Laboratory Balances from Sartorius
page 51
page 50
page 48
page 49