Professional Documents
Culture Documents
Setting The Environment
Setting The Environment
Mastercam Training Guide SETTING THE ENVIRONMENT COMPLETE THESE STEPS BEFORE STARTING EACH LESSON
Before starting the geometry creation and generating the toolpaths you should: Set up the Grid. This will help identify the location of the origin. Customize the toolbars to machine a 2D part. Set the machine type to a Haas Vertical Spindle CNC machine.
3. From the window on the left side of this window expand the Screen topic by selecting the + sign and then select Grid Settings. 4. Enable the Visible Grid and change the Size to 1.
5. Select the OK button to complete this function. 6. When prompted to Save settings to configuration file select Yes.
Setting the Environment Mill SET THE TOOLBARS REQUIRED TO CREATE THE GEOMETRY AND MACHINE A 2D AND OR A 3D PART:
1. Select from the pull down menu Settings>Toolbar States. 2. Select 2D-Toolpaths if you are doing Lessons 1 through 8, select 3D-Toolpaths if your doing Lessons 9 through 14. 3. Then select the Load button.
4. Select the OK button to accept the settings. To toggle on or off the display of the Operations Manager. 5. To Show or Hide the Operations Manager pane on the left of the screen press Alt + O. Pressing Alt + O acts like a toggle switch between Show and Hide. For more information on the Operations Manager see the Tips and Techniques section on the multimedia CD supplied with this text. 6. The Mastercam interface will be displayed as shown below when the operations Manager is hidden.
Setting the Environment Mill OPTIONAL INSTALLING A POST PROCESSOR FOR MASTERCAM X5
The default installation directory for Mastercam is now C:\Program Files\mcamx5 In Windows XP, user data is stored in C:\Documents and Settings\<Username>\My Documents\my mcamx5, and shared data is stored in C:\Documents and Settings\All Users\Documents\shared mcamx5 1. For the following example we will install a post processor for a Generic Haas 4 Axis CNC Milling Machine. Note: If you are not sure which Post Processor to use or the post for your machine is not listed contact CNC Software at 1-800-275-6226 or info@mastercamedu.com. 2. Open the Haas.ZIP file (or compressed post processor file). 3. Copy the following 2 files into the C:\Documents and Settings\All Users\Documents\shared mcamx5\CNC_MACHINES directory; generic haas 4x mill.mmd-5 generic haas 4x mill.control-5 4. Copy the generic haas 4x mill.pst file into; C:\Documents and Settings\All Users\Documents\shared mcamx5\MILL\Posts directory
Mastercam Training Guide OPTIONAL CHANGING THE MEASUREMENT SYSTEM FROM ENGLISH TO METRIC
Mastercam can be used in either Inch (English) or Metric. In order to change from Inch to Metric follow the instructions listed below: 1. From the top Mastercam menu, select Settings>Configuration
3. Select OK
Setting the Environment Mill OPTIONAL CHANGING THE MEASUREMENT SYSTEM FROM METRIC TO ENGLISH
Mastercam can be used in either Inch (English) or Metric. In order to change from Metric to Inch follow the instructions listed below: 1. From the top Mastercam menu, select Settings>Configuration
3. Select OK