Professional Documents
Culture Documents
Solved Problem Question (Gas Ab)
Solved Problem Question (Gas Ab)
Solved Problem Question (Gas Ab)
3.1 A gas mixture at 1.0 atm pressure absolute containing air and CO2 is contacted in a single-stage mixer continuously with pure water at 293 K. The two exit gas and liquid streams reach equilibrium. The inlet gas flow rate is 100 kg-mol / h, with amole fraction of CO2 yA2 = .20. The liquid flow rate entering is 300 kg-mol H2O/h. Calculate the amounts and compositions of the two outlet phases. Assume that water does not vaporize to the gas phase.
3.2 A gas C and 1 atm, and the gas and liquid rates to be 20 mole / h-ft , respectively. Mss transfer coefficient and equilibrium data are as follows:
2
* = 1x 5 C kxa = 60 mol / h-ft3 (mole fraction) -1 kya = 15 mol / h- ft3 (mole fraction) -1
3.3 A problem may be taken as y = 0.06x. Terminal conditions are as follows: Top Bottom X y 0 0.08
0.001 0.009
Calculate the valves of the overall coefficient Kya. You may use the lean gas approximation.
3.5 The capacity of a column is to be increased by 55% by replacing the existing 1-in metal Raschig rings with some other packing without significantly changing the percent flooding. The end composition, L/G ratio, pressure, temperature, etc., remain unchanged. Select the packing