Professional Documents
Culture Documents
DSC-W100 para Desarme
DSC-W100 para Desarme
2-1. DISASSEMBLY
2-1-1. CABINET SECTION
Follow the disassembly in the numerical order given.
EXPLODED VIEW
HARDWARE LIST
1 Cabinet (Rear) Block (1-1 to 1-6) 2 Cabinet (Front) Block (2-1 to 2-3)
2-1
1-6 (Claw) 1-1 (#26/#27) 1-3 (#20/#21) 2-3 (Claw) 1-2 (Open) 1-4 (#20/#21)
Note: High-voltage cautions Discharging the Capacitor Short-circuit between the two points with the short jig about 10 seconds.
1-5 (#20/#21)
2-2 (#20/#21)
DSC-W100_L2 2-2
EXPLODED VIEW
HARDWARE LIST
2-1 2-8
2-2 (#3)
2-5
2-7 2-6
1-2
2-4 (Claw)
2-3 (Claw)
2 LCD Block
DSC-W100_L2 2-3
EXPLODED VIEW
1 Cabinet (Top) Block (1-1 to 1-8) 2 Capacitor Holder Block (2-1 to 2-4) 3 Lens Block (3-1 to 3-4)
2-3
2-4 (Claw)
3 Lens Block
DSC-W100_L2 2-4
MC-162
EXPLODED VIEW
HARDWARE LIST
2-6
2-2 (Slide in the direction of arrow) 2-5 (Boss) 2-4 2-1 (Boss)
05 -1 C D
2-7 (Claw)
2-3 (Claw)
1-1 (#3)
1-4
SY -15
1 SY-154 Board
DSC-W100_L2 2-5
Tools used Torque driver Soldering iron Weight about 60g Adhesive (Super X) (Note) Note: Use adhesive (Super X) or an equivalent article. Dont use what becomes white after drying like a quick-drying glue.
4 2 3
Tip
DSC-W100_L2 2-6
1 1
* After removing the Barrier Assy, if the G1 Dust-Proof Ring was removed, it must be returned to the home position. In returning the ring, adjust the location of a projection to the lens direction. This is an important part to prevent the dust and light from coming in. * After removing the Barrier Assy, take extreme care not to drop dust or foreign substances in the lens barrel.
Projection 1 2 2
DSC-W100_L2 2-7
Do not put the weight on a black mold part. Notch Adhesive Adhesive Adhesive Projection
DSC-W100_L2 2-8E
211 212
ST -14
ns
209 210
208
(including IC001 (CCD imager) and CD-628 flexible complete board) (Note 1, 2) #28 #5
206 201
(Note 3) ns
207
205 213
204
(Note 3)
203
(Note 3)
202
(Note 3)
Note 1: CCD block assembly is including CD-628 flexible complete board. Note 2: Be sure to read Precuations for Replacement of Imager on page 4-3. Note 3: Be sure to read Exchange method of barrier assy on page 2-6.
Refer to page 5-1 for mark 0. Ref. No. 201 202 203 204 205 206 207 208 Part No. A-1060-696-A 3-091-427-01 X-3954-476-1 3-086-156-31 2-021-317-01 Description LENS BLOCK ASSY 890 (J1) (Note 3) RING (A), ORNAMENTAL (Note 3) BARRIER ASSY (Note 3) TAPPING SCREW (P2) (Note 3) MASK, LPF Ref. No. 0 209 0 210 * 211 * 212 * 213 #5 #28 Part No. Description
A-1178-823-A ST-146 FLEXIBLE BOARD, COMPLETE 1-479-690-11 FLASH UNIT 2-676-271-01 HOLDER, AF 2-676-270-01 HOLDER, ST X-2109-138-1 FRAME ASSY, LENS 3-080-204-01 SCREW, TAPPING, P2 (Black) 3-348-998-61 SCREW (M1.4X4), TAPPING, PAN (Dark Silver)
1-788-391-11 OPTICAL FILTER BLOCK (OFB-02-27) 2-021-318-01 SEALGOM 890 A-1178-700-A CCD BLOCK ASSY (including IC001 (CCD IMAGER) and CD-628 flexible complete board) (Note 1, 2)
DSC-W100_L2 5-6