Professional Documents
Culture Documents
USB 3.0 Installation Instructions
USB 3.0 Installation Instructions
Included in this build are device side drivers for USB 3.0 for:
Windows 7 (32 & 64 bit) Windows Vista (32 & 64 bit) Windows XP (32 & 64 bit)
3. Right Click the folder and choose Extract All 4. You will then have a folder that looks like this
The setup program will automatically interrogate your system to determine which operating system you are running and apply the correct driver. Note: Make sure you have unplugged your USB 3.0 drive. Otherwise this process hangs and will need to be repeated.
Screen #2 takes only a few moments. If it halts, make sure the drive is removed.
You have now successfully installed the USB 3.0 device-side driver on your PC.
Now we need to replace the current Microsoft driver (MSCD) with our new driver.
If you dont have one, right click on the Start Menu and right click on My Computer located there (upper right list).
2. Choose Manage from the pull down message that appears. 3. When the Computer Manager comes up: a. Choose Device Manager b. Select Universal Serial Bus Controllers c. Select USB Mass Storage Device
7. Success!
8. You there are a total of 3 components that will install. You may have to confirm each one, depending on your OS and settings.
Please note: USB 3.0 requires both a Host-side and Device-side driver. If you have successfully installed the USB 3.0 device driver and dont achieve speeds over 150MB/s, please check your motherboard or add-on card manual for the Host-side drivers. Thank you for your purchase.