Professional Documents
Culture Documents
Ringfeder: Keyless Shaft/Hub Connections
Ringfeder: Keyless Shaft/Hub Connections
Ringfeder: Keyless Shaft/Hub Connections
KEYLESS SHAFT/HUB
CONNECTIONS
LOCKING ASSEMBLIES TM
LOCKING ELEMENTS TM
SHRINK DISCS
W-300-2
Ringfeder Corporation
Catalog W-300-1
Shaft-Hub Locking Devices
Working Principle
Ringfeder shaft-hub locking devices are based on the inclined plane or taper principle. Clamping forces generated by torqued up locking screws are translated into predetermined contact pressures so as to create mechanical shrink-fit connections.
Applications
Ringfeder frictional shaft-hub locking devices have successfully solved shaft-hub
connection problems involving:
Gears
Rolls
Cams
Levers
Winches
Sprockets
Flanges
Couplings
Brake drums
Sheaves
Flywheels
Hand wheels
Clutches
Fan wheels
Worm gears
Bevel gears
Helical gears
Mixer shafts
Crane wheels
Bucket wheels
Pump impellers
Turbine rotors
Conveyer pulleys
Ship propellers
Windmill propellers
Rock-cutting heads
Shaft-mounted gear units
Advantages
Elimination of keys, keyways or splines and associated fitting costs
Completely tight fit around shaft no backlash
Impervious to reversing, dynamic or shock loads
Transmission of high torques and axial loads
Benefits
Reduced machining costs
Easy installation, assembly and disassembly
Easy axial and angular adjustments and timing
Catalog W-300-2
Product Overview
Locking AssembliesTM RfN 7012
INTERNAL
EXTERNAL
INTERNAL
Catalog W-300-2
6
7
7a
8
9
10
3
Ringfeder
Locking Assemblies TM
RfN 7012 & RfN 7012-IN
Application Examples
Fig. 5: Drive
Pulley
Drive pulley of a
gondola ski lift
fastened with a
300 x 375 RfN
7012 Locking
AssemblyTM.
Fig. 4: Sprockets
Input shaft for 750 HP draw works showing
applications of Locking AssembliesTM and
adaptor flanges.
Catalog W-300-2
Selection Guide
1. Determine the required shaft diameter (d) or
maximum torque (Mt ) to be transmitted:
Torque Mt = 5252 x HP (lb-ft)
RPM
If combined torsional and axial loads are to be transmitted, calculate the resulting torque as follows:
Mt res =
Mt2 +
(P 24x d)
ax
Mt cat
YP + C3 x p
YP - C3 x p
EXAMPLE
A spur gear is to be mounted on a 3.9375 dia. shaft capable of
transmitting a peak torque of 5,750 lb-ft. The gear is made of 1040
AISI steel (Y.P. 36,000 psi). Select the proper Locking AssemblyTM
and determine the required hub dimensions and proper machining
tolerances.
1. The shaft diameter is specified at 3.9375.
2. The specification tables indicate that a 3-15/16 Locking
AssemblyTM is capable of transmitting a torque (Mt) of 6,944
lb-ft, more than the required amount. Select the 3-15/16
Locking AssemblyTM.
3. The specification tables indicate that the selected 3-15/16
Locking AssemblyTM requires a minimum hub outer diameter of
8.000 based on Y.P. 36,000 psi hub material.
4. The hub length (B) should be 2 x L1. Fig. 8 indicates that L1 =
1.852. Therefore, B = 2 x 1.852 = 3.704 (minimum).
Since the gear must be concentric within .0025, specify the
following fit tolerance for the pilot bore:
shaft:
3.9375/3.9365
bore:
3.9375/3.9390
5. According to the specification tables, the machining tolerances
for the selected Locking AssemblyTM are as follows:
shaft:
+.000/-.0035
counter bore:
-.000/+.0035
However, because of the concentricity requirements for the gear,
tighter tolerances are needed for the shaft and pilot bore.
The counter bore tolerances for the Locking AssemblyTM are
-.0000/+.0025 (within the permissible limits and in accordance
with the fit tolerance specified in Step 4 above).
6. Order the following assembly:
Size
RfN
Series
Metric:
100 x 145
RfN
7012
Inch:
3-15/16
RfN
7012-IN
Catalog W-300-2
Fig. 9
T1
T2
inches
1-3/4
1
1-1/8
1-3/16
1-1/4
1-3/8
1-7/16
1-1/2
1-5/8
1-11/16
1-3/4
1-7/8
1-15/16
2
2-1/8
2-3/16
2-1/4
2-3/8
2-7/16
2-1/2
2-9/16
2-5/8
2-11/16
2-3/4
2-7/8
2-15/16
3
3-1/8
3-1/4
3-3/8
3-7/16
3-1/2
3-3/4
3-15/16
4
4-7/16
4-1/2
4-15/16
5
5-1/2
6
6-1/2
7
7-1/2
7-7/8
.750
1.000
1.125
1.1875
1.250
1.375
1.4375
1.500
1.625
1.6875
1.750
1.875
1.9375
2.000
2.125
2.1875
2.250
2.375
2.4375
2.500
2.5625
2.625
2.6875
2.750
2.875
2.9375
3.000
3.125
3.250
3.375
3.4375
3.500
3.750
3.9375
4.000
4.4375
4.500
4.9375
5.000
5.500
6.000
6.500
7.000
7.500
7.875
+0
.002
1.850
1.969
2.165
2.159
2.362
2.365
2.559
2.559
2.953
2.953
2.953
3.150
3.150
3.346
3.346
3.543
3.543
3.531
3.740
3.740
3.737
4.331
4.331
4.337
4.528
4.528
4.724
4.724
4.921
4.921
5.118
5.118
5.305
5.708
5.843
6.496
6.496
7.087
7.087
7.492
8.268
8.858
9.252
9.823
10.235
0
+.002
+0
.0025
+0
.003
+0
.0035
+0
.004
+0
.0045
0
+.0025
0
+.003
0
+0035
0
+.004
0
+.0045
L
.787
.787
.787
.813
.787
.776
.787
.787
.945
.945
.945
.945
.945
.945
.945
.945
.945
.996
.945
.945
.959
1.102
1.102
1.079
1.102
1.102
1.102
1.102
1.102
1.102
1.102
1.102
1.142
1.301
1.299
1.299
1.299
1.496
1.496
1.449
1.496
1.732
1.732
2.126
2.051
I
.669
.669
.669
.669
.669
.669
.669
.669
.787
.787
.787
.787
.787
.787
.787
.787
.787
.787
.787
.787
.787
.945
.945
.945
.945
.945
.945
.945
.945
.945
.945
.945
.945
1.024
1.024
1.024
1.024
1.339
1.339
1.339
1.339
1.496
1.496
1.811
1.811
max.
Mt
lb-ft
L1
1.083
1.083
1.083
1.108
1.083
1.071
1.083
1.083
1.319
1.319
1.319
1.319
1.319
1.319
1.319
1.319
1.319
1.370
1.319
1.319
1.333
1.555
1.555
1.532
1.555
1.555
1.555
1.555
1.555
1.555
1.555
1.555
1.594
1.852
1.850
1.850
1.850
2.047
2.047
2.000
2.047
2.362
2.362
2.756
2.681
1
1
1
1
1
1
1
1
1
1
2
2
2
3
3
3
3
3
3
3
4
4
4
4
5
6
7
8
9
12
12
15
19
23
27
33
37
185
275
345
362
459
506
608
636
070
109
150
222
259
519
613
656
700
787
098
148
199
120
195
320
450
522
580
731
426
593
629
716
714
944
016
897
027
282
434
088
290
037
008
633
973
450
000
720
900
000
600
450
000
700
430
000
450
000
600
150
450
000
600
450
750
000
514
804
850
450
750
000
400
950
750
300
600
750
750
000
450
750
200
200
200
600
450
450
350
350
Qty.
8
9
10
10
12
12
15
15
12
12
12
12
12
14
14
14
14
14
16
16
16
14
14
14
14
14
14
14
16
16
16
16
18
14
14
16
16
20
20
22
26
22
24
28
30
size
dG
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
M
6x18
6x18
6x18
6x18
6x18
6x18
6x18
6x18
8x22
8x22
8x22
8x22
8x22
8x22
8x22
8x22
8x22
8x22
8x22
8x22
8x22
10x25
10x25
10x25
10x25
10x25
10x25
10x25
10x25
10x25
10x25
10x25
10x25
12x30
12x30
12x30
12x30
12x35
12x35
12x35
12x35
14x40
14x40
14x45
14x45
s
mm
MA
lb-ft
dD
DN
inches
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
8
8
8
8
8
10
10
10
10
10
10
10
10
12
12
12
12
10.13
10.13
10.13
10.13
10.13
10.13
10.13
10.13
25.32
25.32
25.32
25.32
25.32
25.32
25.32
25.32
25.32
25.32
25.32
25.32
25.32
50.63
50.63
50.63
50.63
50.63
50.63
50.63
50.63
50.63
50.63
50.63
50.63
90.41
90.41
90.41
90.41
90.41
90.41
90.41
90.41
137.43
137.43
137.43
137.43
M 8
M 8
M 8
M 8
M 8
M 8
M 8
M 8
M 10
M 10
M 10
M 10
M 10
M 10
M 10
M 10
M 10
M 10
M 10
M 10
M 10
M 12
M 12
M 12
M 12
M 12
M 12
M 12
M 12
M 12
M 12
M 12
M 12
M 14
M 14
M 14
M 14
M 14
M 14
M 14
M 14
M 16
M 16
M 16
M 16
2.375
2.500
2.750
2.750
3.125
3.125
3.375
3.375
4.125
4.125
4.125
4.250
4.250
4.750
4.750
4.875
4.875
4.875
5.250
5.250
5.250
5.937
5.937
6.000
6.250
6.250
6.375
6.375
6.875
6.875
7.125
7.125
7.500
8.000
8.375
9.125
9.125
9.500
9.500
10.250
11.500
12.000
12.750
13.125
13.625
Notes:
Catalog W-300-2
RfN
7012
Size
mm
L1
.787
.787
.787
.669
.669
.669
1.083
1.083
1.083
.787
.787
.787
.669
.669
.669
1.083
1.083
1.083
275
340
362
27 000
26 300
24 900
9
9
9
M
M
M
.787
.787
.787
.669
.669
.669
1.083
1.083
1.083
456
506
630
26 397
25 600
27 628
12
12
15
2.559
2.953
2.953
.787
.945
.945
.669
.787
.787
1.083
1.319
1.319
665
1 085
1 165
25 600
32 634
29 850
3.150
3.150
3.346
.945
.945
.945
.787
.787
.787
1.319
1.319
1.319
1 230
1 280
1 642
.945
.945
1.102
.787
.787
.945
1.319
1.319
1.555
1.102
1.102
1.102
.945
.945
.945
1.102
1.102
1.229
T1
20 x 47
22 x 47
24 x 50
.787
.866
.945
+0
.002
1.850
1.850
1.969
25 x 50
28 x 55
30 x 55
.984
1.102
1.181
32 x 60
35 x 60
38 x 65
1.260
1.378
1.496
40 x 65
42 x 75
45 x 75
1.575
1.654
1.772
48 x 80
50 x 80
55 x 85
1.890
1.969
2.165
60 x 90
65 x 95
70 x 110
2.362
2.559
2.756
75 x 115
80 x 120
85 x 125
2.953
3.150
3.346
90 x 130
95 x 135
100 x 145
3.543
3.740
3.937
110 x 155
120 x 165
130 x 180
4.331
4.724
5.118
140 x 190
150 x 200
160 x 210
5.512
5.906
6.299
170 x 225
180 x 235
190 x 250
6.693
7.087
7.480
200 x 260
220 x 285
240 x 305
7.874
8.661
9.449
+0
.0045
10.236
11.220
12.008
260 x 325
280 x 355
300 x 375
10.236
11.024
11.811
+0
.005
12.795
13.976
14.764
320 x 405
340 x 425
360 x 455
12.598
13.386
14.173
380 x 475
400 x 495
420 x 515
14.961
15.748
16.535
440
460
480
500
17.323
18.110
18.898
19.685
x
x
x
x
545
565
585
605
T2
inches
s
mm
5
5
5
MA
lb-ft
10.13
10.13
10.13
M 8
M 8
M 8
DN
inches
2.375
2.375
2.500
6x18
6x18
6x18
5
5
5
10.13
10.13
10.13
M 8
M 8
M 8
2.500
2.750
2.750
M
M
M
6x18
6x18
6x18
5
5
5
10.13
10.13
10.13
M 8
M 8
M 8
3.125
3.125
3.375
15
12
12
M
M
M
6x18
8x22
8x22
5
6
6
10.13
25.32
25.32
M 8
M 10
M 10
3.375
4.125
4.125
28 428
27 000
28 450
12
12
14
M
M
M
8x22
8x22
8x22
6
6
6
25.32
25.32
25.32
M 10
M 10
M 10
4.250
4.250
4.750
1 787
2 199
3 327
25 600
27 000
29 850
14
16
14
M 8x22
M 8x22
M 10x25
6
6
8
25.32
25.32
50.63
M 10
M 10
M 12
4.875
5.250
6.000
1.555
1.555
1.555
3 544
3 761
4 557
27 750
25 600
27 750
14
14
16
M 10x25
M 10x25
M 10x25
8
8
8
50.63
50.63
50.63
M 12
M 12
M 12
6.250
6.375
6.875
.945
.945
1.024
1.555
1.555
1.850
4 774
5 714
6 944
25 600
27 750
27 750
16
18
14
M 10x25
M 10x25
M 12x30
8
8
10
50.63
50.63
90.41
M 12
M 12
M 14
7.125
7.500
8.000
1.229
1.229
1.496
1.024
1.024
1.339
1.850
1.850
2.047
7 595
9 475
12 730
25 600
26 300
23 450
14
16
20
M 12x30
M 12x30
M 12x35
10
10
10
90.41
90.41
90.41
M 14
M 14
M 14
8.375
9.125
9.500
1.496
1.496
1.496
1.339
1.339
1.339
2.047
2.047
2.047
15 117
17 504
20 252
23 450
24 200
24 200
22
24
26
M 12x35
M 12x35
M 12x35
10
10
10
90.41
90.41
90.41
M 14
M 14
M 14
10.250
10.750
11.500
1.732
1.732
2.047
1.496
1.496
1.811
2.362
2.362
2.677
23 724
27 341
33 633
22 750
23 750
21 350
22
24
28
M 14x40
M 14x40
M 14x45
12
12
12
137.43
137.43
137.43
M 16
M 16
M 16
12.000
12.750
13.125
0
+.0045
2.047
2.205
2.205
1.811
1.969
1.969
2.677
2.913
2.913
37 973
49 184
61 842
21 350
21 350
22 750
30
26
30
M 14x45
M 16x50
M 16x50
12
14
14
137.43
213.37
213.37
M 16
M 20
M 20
13.625
15.000
16.500
0
+.005
2.205
2.598
2.598
1.969
2.362
2.362
2.913
3.406
3.406
75 223
92 582
110 665
23 450
20 600
21 350
34
32
36
M 16x50
M 18x60
M 18x60
14
14
14
213.37
292.94
292.94
M 20
M 22
M 22
17.750
18.625
20.000
3.071
3.071
3.543
2.835
2.835
3.307
3.957
3.957
4.567
151 893
162 019
212 650
21 350
20 600
20 600
36
36
36
M 20x70
M 20x70
M 22x80
17
17
17
419.51
419.51
564.17
M 24
M 24
M 27
21.500
22.250
23.875
3.543
3.543
3.543
3.307
3.307
3.307
4.567
4.567
4.567
222 776
232 903
270 514
19 200
18 500
19 200
36
36
40
M 22x80
M 22x80
M 22x80
17
17
17
564.17
564.17
564.17
M 27
M 27
M 27
24.625
25.250
26.625
4.016
4.016
4.016
4.016
3.780
3.780
3.780
3.780
5.118
5.118
5.118
5.118
329
339
372
405
18
17
17
17
40
40
42
44
M
M
M
M
19
19
19
19
723.30
723.30
723.30
723.30
M 30
M 30
M 30
M 30
27.750
28.625
29.625
30.625
0
+.002
1.969
2.165
2.165
+0
.0025
+0
.003
2.362
2.362
2.559
3.543
3.740
4.331
0
+.0025
0
+.003
4.528
4.724
4.921
+0
.0035
5.118
5.315
5.709
0
+.0035
6.102
6.496
7.087
+0
.004
7.480
7.874
8.268
0
+.004
8.858
9.252
9.843
+0
.0055
15.945
16.732
17.913
0
+.0055
18.701
19.488
20.276
+0
.006
21.457
22.244
23.031
23.819
0
+.006
102
951
450
048
p
psi
29 850
27 750
27 750
Qty.
8
8
9
size
dG
M 6x18
M 6x18
M 6x18
500
800
800
800
24X90
24X90
24X90
24X90
dD
Ordering Example
Metric:
Inch:
Size
100 x 145
3-15/16
RfN
RfN
RfN
Series
7012
7012-IN
Catalog W-300-2
Design Examples
Fig. 13
Hub mounted using two RfN 7012 Locking
AssembliesTM to transmit twice the torque.
Fig. 14
Hub fastened with two RfN 7012 Locking
AssembliesTM located at opposite ends of the
hub. In this arrangement twice the torque is
transmitted provided the hub length is less
than four times the width of the Locking
AssemblyTM. Bores must be concentric to
each other.
Catalog W-300-2
INSTALLATION TOOLS
1.
2.
3.
REMOVAL
Ringfeder Locking AssembliesTM are not self-locking. The
individual rings are tapered so that the inner and outer rings
spring apart after the last screw has been loosened.
1 Loosen the locking screws in several steps
following a diametrically opposite sequence.
Do not remove the screws completely.
2 Remove the hub and Locking AssemblyTM from the shaft.
REMOVAL TOOL
Locking AssembliesTM
RfN 7012
Metric Series
RfN 7012-IN
Inch Series
20 x 47 to 40 x 65
1 to
42 x 75 to 65 x 95
1-5/8 to
70 x 110 to 95 x 135
2-3/4 to
100 x 145 to 160 x 210 3-15/16 to
170 x 225 to 200 x 260
6-1/2 to
220 x 285 to 260 x 325
280 x 355 to 300 x 375
320 x 405 to 340 x 425
360 x 455 to 420 x 515
440 x 545 to 1000 x 1110
1-1/2
2-9/16
3-3/4
6
7-7/8
(lb-ft)
(Nm)
Hex Key
Size (s)
Square
Drive Size
Pull-Out Thread
(dD) Metric
10.13
25.32
50.63
90.41
137.43
213.37
292.94
419.51
564.17
723.30
14
35
70
125
190
295
405
580
780
1000
M6
M8
M 10
M 12
M 14
M 16
M 18
M 20
M 22
M 24
5
6
8
10
12
14
14
17
17
19
1/4
1/4
3/8
3/8
1/2
1/2
1/2
3/4
3/4
3/4
M8
M 10
M 12
M 14
M 16
M 20
M 22
M 24
M 27
M 30
Catalog W-300-2
Ringfeder
Locking Assemblies TM
RfN 7013 & RfN 7013-IN
RfN 7013.0
RfN 7013.1
Fig. 20
Hub mounted with a RfN 7013.0
Locking AssemblyTM in a
straight-thru bore.
Fig. 23
Hub mounted with a RfN 7013.0
Locking AssemblyTM in counterbore.
10
Fig. 24
Hub mounted with a RfN 7013.1 Locking
AssemblyTM flange outside the hub bore.
Catalog W-300-2
Fig. 22
Hub mounted with a RfN 7013.1 Locking
AssemblyTM with countersunk flange.
Fig. 25
Typical layout for a Locking AssemblyTM installation.
Selection Guide
1. Determine the required shaft diameter (d) or
maximum torque (Mt ) to be transmitted:
Torque Mt = 5252 x HP (lb-ft)
RPM
If combined torsional and axial loads are to be transmitted, calculate the resulting torque as
follows:
Pax x d 2
Mt res =
Mt2 +
Mt cat
24
DN D x
YP + C3 x p
YP - C3 x p
Ordering Example
Metric:
Inch:
Size
55 x 85
2-1/4
RfN
RfN
RfN
Series
7013.0
7013.1-IN
B
L2
L2
L2
DN
DN
DN
b
Fig. 26
C3 = 0.6
Hub pre-centered on shaft
B (hub width) 2 x L2, b Ltot
Fig. 27
C3 = 0.8
Straight-thru bore
B (hub width) 2 x L2
Fig. 28
C3 = 1
(hub width)
L2 B < 2 x L2
Ordering Example
Metric:
Inch:
Catalog W-300-2
Size
60 x 90
2-7/8
RfN
RfN
RfN
Series
7013.1
7013.1-IN
11
Fig. 29
Ringfeder RfN 7013.0
Locking AssemblyTM
(hub moves freely axially
during tightening).
Fig. 30
Ringfeder RfN
7013.1 Locking
AssemblyTM (hub
axially fixed during
tightening).
Notes
Locking screws
DIN 912 12.9
T1
+0
.0013
1.969
2.165
2.362
2.362
2.559
2.559
2.953
2.953
3.150
3.150
3.150
3.346
3.346
3.543
3.543
3.740
3.740
3.740
4.331
4.528
4.528
4.528
4.921
5.118
5.118
5.315
5.709
5.709
+0
.0016
+0
.0018
+0
.0022
T2
inches
0
+.0018
0
+.0022
0
+.0025
Ltot
1.456
1.456
1.456
1.456
1.456
1.456
1.811
1.811
1.811
1.811
1.811
1.811
1.811
1.811
1.811
1.811
1.811
1.811
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.362
2.677
2.677
1.220
1.220
1.220
1.220
1.220
1.220
1.496
1.496
1.496
1.496
1.496
1.496
1.496
1.496
1.496
1.496
1.496
1.496
1.968
1.968
1.968
1.968
1.968
1.968
1.968
1.968
2.283
2.283
L1
L2
D1
1.012
1.012
1.012
1.012
1.012
1.012
1.193
1.193
1.193
1.193
1.193
1.193
1.193
1.193
1.193
1.193
1.193
1.193
1.590
1.590
1.590
1.590
1.590
1.590
1.590
1.590
1.882
1.882
.854
.854
.854
.854
.854
.854
.996
.996
.996
.996
.996
.996
.996
.996
.996
.996
.996
.996
1.315
1.315
1.315
1.315
1.315
1.315
1.315
1.315
1.606
1.606
2.205
2.441
2.677
2.677
2.874
2.874
3.267
3.267
3.464
3.464
3.464
3.740
3.740
3.937
3.937
4.134
4.134
4.134
4.724
4.921
4.921
4.921
5.315
5.512
5.512
5.709
6.102
6.102
max.
Mt
lb-ft
1
1
1
1
1
1
1
1
2
2
2
2
3
3
3
4
5
5
5
7
7
8
323
385
531
585
620
647
234
329
426
473
521
803
856
908
014
466
530
593
680
845
929
012
434
543
644
180
957
083
p
psi
40
33
38
35
33
32
43
40
38
36
35
39
38
36
34
38
37
37
34
33
32
31
32
31
31
36
27
26
170
800
560
055
495
100
870
740
070
840
690
125
005
875
935
965
990
065
770
300
590
910
430
810
240
450
300
870
15
13
15
15
13
13
19
19
17
17
17
19
19
18
18
20
20
20
18
16
16
16
18
17
17
21
16
16
070
650
070
070
935
935
055
055
915
915
915
625
625
485
485
050
050
050
200
920
920
920
345
630
630
190
210
210
12
Catalog W-300-2
1)
Qty
2)
Size
dG
5
5
6
6
6
6
6
6
6
6
6
7
7
7
7
8
8
8
7
7
7
7
8
8
8
10
10
10
7
7
9
9
10
10
9
9
9
9
9
10
10
10
10
12
12
12
10
10
10
10
12
12
12
15
15
15
M 6x20
M 6x20
M 6x20
M 6x20
M 6x20
M 6x20
M 8x25
M 8x25
M 8x25
M 8x25
M 8x25
M 8x25
M 8x25
M 8x25
M 8x25
M 8x25
M 8x25
M 8x25
M 10x35
M 10x35
M 10x35
M 10x35
M 10x35
M 10x35
M 10x35
M 10x35
M 10x35
M 10x35
s
MA
mm lb-ft
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
8
8
8
8
8
8
8
8
8
8
12.5
12.5
12.5
12.5
12.5
12.5
30
30
30
30
30
30
30
30
30
30
30
30
60
60
60
60
60
60
60
60
60
60
DN
inches
2.875
3.000
3.375
3.375
3.625
3.625
4.750
4.750
4.875
4.875
4.875
5.500
5.500
5.500
5.500
6.125
6.125
6.125
6.750
6.875
6.875
6.875
7.625
7.875
7.875
9.000
8.500
8.500
Locking screws
DIN 912 12.9
T1
+0
.0013
+0
.0016
+0
.0018
+0
.0022
+0
.0025
D
1.850
1.850
1.969
1.969
2.165
2.165
2.362
2.362
2.559
2.559
2.953
2.953
3.150
3.150
3.346
3.543
3.740
4.331
4.528
4.724
4.921
5.118
5.315
5.709
6.102
6.496
7.087
7.480
7.874
T2
inches
0
+.0016
0
+.0018
0
+.0022
0
+.0025
0
+.0028
Ltot
1.456
1.456
1.456
1.456
1.456
1.456
1.456
1.456
1.456
1.456
1.811
1.811
1.811
1.811
1.811
1.811
1.811
2.362
2.362
2.362
2.362
2.362
2.362
2.677
2.677
2.677
3.031
3.031
3.031
1.220
1.220
1.220
1.220
1.220
1.220
1.220
1.220
1.220
1.220
1.496
1.496
1.496
1.496
1.496
1.496
1.496
1.968
1.968
1.968
1.968
1.968
1.968
2.283
2.283
2.283
2.560
2.560
2.560
L1
L2
D1
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.012
1.193
1.193
1.193
1.193
1.193
1.193
1.193
1.590
1.590
1.590
1.590
1.590
1.590
1.882
1.882
1.882
2.063
2.063
2.063
.854
.854
.854
.854
.854
.854
.854
.854
.854
.854
.996
.996
.996
.996
.996
.996
.996
1.315
1.315
1.315
1.315
1.315
1.315
1.606
1.606
1.606
1.787
1.787
1.787
2.086
2.086
2.205
2.205
2.441
2.441
2.667
2.667
2.874
2.874
3.267
3.267
3.464
3.464
3.740
3.937
4.134
4.724
4.921
5.118
5.315
5.512
5.709
6.102
6.496
6.890
7.480
7.874
8.267
max.
Mt
lb-ft
1
1
1
1
1
2
2
3
3
4
5
5
7
7
8
11
14
16
20
217
238
303
318
354
383
535
585
640
680
250
345
430
497
837
003
589
688
949
231
388
714
160
956
751
355
972
274
614
p
psi
40
36
42
40
36
33
38
34
32
30
43
40
37
36
38
35
37
34
32
30
32
30
36
27
24
27
26
24
27
810
975
520
810
405
985
250
980
130
575
085
245
825
260
395
125
115
700
425
430
710
860
545
300
885
300
735
885
875
12
12
15
15
13
13
15
15
13
13
19
19
17
17
19
18
20
18
16
15
18
17
21
16
15
17
17
16
18
800
800
070
070
650
650
070
070
935
935
055
055
915
915
625
485
050
200
920
925
345
630
190
210
215
065
065
210
485
1)
Qty
2)
Size
dG
4
4
5
5
5
5
6
6
6
6
6
6
6
6
7
7
8
7
7
7
8
8
10
10
10
12
10
10
12
6
6
7
7
7
7
9
9
10
10
9
9
9
9
10
10
12
10
10
10
12
12
15
15
15
18
15
15
18
M 6x20
M 6x20
M 6x20
M 6x20
M 6x20
M 6x20
M 6x20
M 6x20
M 6x20
M 6x20
M 8x25
M 8x25
M 8x25
M 8x25
M 8x25
M 8x25
M 8x25
M 10x35
M 10x35
M 10x35
M 10x35
M 10x35
M 10x35
M 10x35
M 10x35
M 10x35
M 12x40
M 12x40
M 12x40
s
MA
mm lb-ft
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
8
8
8
8
8
8
8
8
8
10
10
10
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
12.5
30
30
30
30
30
30
30
60
60
60
60
60
60
60
60
60
105
105
105
DN
inches
2.625
2.625
2.875
2.875
3.000
3.000
3.375
3.375
3.625
3.625
4.750
4.750
4.875
4.875
5.500
5.500
6.125
6.750
6.875
6.937
7.625
7.875
9.000
8.500
8.750
9.875
10.625
11.250
12.375
REMOVAL
1. Loosen all screws several turns.
2. Remove the screw adjacent to each threaded jacking
hole and screw it into its corresponding jacking hole to
press off the outer ring. This releases the connection.
3. Remove the hub and the Locking AssemblyTMfrom the
shaft. Leave the screws in the jacking holes until you
have completely removed the Locking AssemblyTM from
the hub.
Disassemble and clean dirty undamaged Locking
AssembliesTM before re-use.
TOOLS REQUIRED FOR ASSEMBLY AND REMOVAL
a ) Standard torque wrench with either 1/4 or 3/8 square
drive and suitable torque range; see Table for specified
tightening torques (MA).
b ) Metric hexagonal bit socket (see Fig. 31: Square Drives)
for torque wrench with suitable across flats dim. (s); see
Table 3.
NOTE: DO NOT USE IMPACT WRENCH!
Catalog W-300-2
13
Ringfeder
Shrink Discs
RfN 4071, RfN 4091 & RfN 4051
Applications Examples
14
Catalog W-300-2
Fig. 38:
Shrink Disc on engine flywheel coupling
for diesel driven compressor.
Fig. 37:
RING-flex coupling in automotive
plant main conveyor drive.
Fig. 40:
Diesel engine flywheel coupling.
Fig. 39:
Shrink Disc on U-joint drive in sawmill
equipment.
Catalog W-300-2
15
SHRINK
DISCS
RfN 4051
RfN 4071
RfN 4091
LIGHT DUTY
SERIES
STANDARD
DUTY SERIES
HEAVY DUTY
SERIES
RfN 4051-SR
RfN 4071-SR
RfN 4091-SR
LIGHT DUTY
SERIES
STANDARD
DUTY SERIES
HEAVY DUTY
SERIES
SPLIT
SHRINK
DISCS
Shrink Disk
Gear
Shaftmounted
Reducer
Shaft-bearing
Driven Shaft
Figu
Type
16
Catalog W-300-2
1/2 {(
2
XH-YH)
Mt res =
Mt2 +
(P 24x d)
ax
Mt cat
Mt
Pax
dW
Fig. 48
Catalog W-300-2
17
Selection Guide
Shrink Discs
1
Ordering Example
Example:
Size
90
RfN
RfN
Series
4071
Detail A
See Detail A
and Options
Fig. 49: Shrink Disc Layout
Shrink Disc RfN 4071
Option 1
d
TH
dW
TW
=
=
=
=
=
Mt
D
d1
d2
=
=
=
=
Notes
L, L1,L2, e
s
MA
d3
r
Pax
18
Option 2
Catalog W-300-2
TH
24
.945
30
1.181
36
44
1.417
+0
1.732 .0015
50
1.969
+0
.0013
55
2.165
62
2.441
68
+0
2.677 .0018
75
2.953
80
3.150
90
100
3.543
+0
3.937 .0021
110
4.331
125
4.921
140
5.512
155
+0
6.102 .0025
165
6.496
175
6.890
185
7.283
195
7.677
200
+0
7.874 .0028
220
8.661
240
9.449
260
10.236
280
+0
11.024 .0032
300
11.811
320
12.598
340
13.386
350
13.780
360
+0
14.173 .0035
380
14.961
390
15.354
400
15.748
420
16.535
440
17.323
460
+0
18.110 .0038
480
18.898
500
19.685
dW
inches
.625
.827
.875
1.024
1.062
1.220
1.250
1.437
1.496
1.654
1.654
1.890
1.890
2.047
1.969
2.362
2.165
2.559
2.362
2.756
2.559
2.953
2.756
3.150
2.953
3.346
3.346
3.740
3.740
4.134
4.134
4.528
4.528
4.921
4.921
5.315
5.315
5.709
5.512
6.102
5.906
6.299
6.299
6.693
6.693
7.480
7.480
8.268
8.268
9.055
9.055
9.646
9.449
10.236
9.843
10.630
10.630
11.220
11.024
11.614
11.417
12.205
11.811
12.598
12.402
12.992
12.992
13.780
13.386
14.173
14.173
14.961
14.961
15.748
15.748
16.535
TW
R1max.
max.
Mt
lb-ft
.0007
.065
.0013
.105
.0019
.145
.165
.185
.205
.0027
.225
.0031
.265
.285
.305
.0035
.340
.400
.0040
.360
.0044
.380
.480
.0048
Locking screws
DIN 931 - 10.9
1
1
1
1
2
1
2
2
3
3
5
5
6
5
7
8
11
11
14
16
20
22
28
26
33
38
45
47
60
54
63
70
81
88
115
120
151
160
199
202
232
230
275
287
339
326
368
341
385
418
485
460
529
494
548
575
663
594
676
737
840
862
966
967
1073
077
184
160
273
295
465
438
660
693
018
856
387
365
770
475
323
844
914
360
393
504
348
089
638
311
966
114
064
138
826
227
653
866
766
554
192
355
731
944
114
582
434
072
136
512
066
966
208
059
152
840
344
131
862
664
296
019
800
509
027
219
341
262
597
192
774
328
840
506
379
600
864
992
256
731
208
L2
Wt.
lbs
Qty
Size
MA
s
mm lb-ft
d1
d2
I
inches
L1
1.97
1.417
1.024
.551
.768
.906
.315 .108
.4
M 5x 18
2.36
1.732
1.260
.630
.846
.984
.354 .108
.7
M 5x 18
2.83
2.047
1.496
.709
.925 1.083
.394 .108
.9
M 6x 20
10
3.15
2.402
1.850
.433 .108
1.3
M 6x 20
10
3.54
2.756
2.087
.472 .108
1.8
M 6x 25
10
3.94
2.953
2.283
.512 .148
2.4
M 6x 25
10
4.33
3.386
2.598
.512 .148
2.9 10
M 6x 25
10
4.53
3.386
2.835
.512 .148
3.1 10
M 6x 25
10
5.43
3.937
3.110
.551 .148
3.7
M 8x 30
13
22
5.71
3.937
3.307
.551 .148
4.2
M 8x 30
13
22
6.10
4.488
.669 .177
7.3 10
M 8x 35
13
22
6.69
4.882
.748 .197
10.4 12
M 8x 35
13
22
7.28
5.354
.866 .217
13.0
M 10x 40
17
44
8.46
6.299
.906 .236
18.3 12
M 10x 40
17
44
9.06
6.890
22.0 10
M 12x 45
19
74
10.43
7.559
33.1 12
M 12x 50
19
74
11.42
8.268
48.5
M 16x 55
24
185
11.81
8.661
48.5
M 16x 55
24
185
12.99
9.291
81.6 10
M 16x 65
24
185
13.78
9.685
90.4 12
M 16x 65
24
185
13.78
9.685
90.4 12
M 16x 65
24
185
14.57 10.630
119.0 15
M 16x 80
24
185
15.94 11.614
147.7 12
M 20x 80
30
362
180.8 14
M 20x 90
30
362
224.9 16
M 20x100 30
362
260.1 18
M 20x100 30
362
288.8 20
M 20x100 30
362
410.1 24
M 20x110 30
362
429.9 24
M 20x110 30
362
449.7 24
M 20x110 30
362
526.9 20
M 24x120 36
620
573.2 21
M 24x120 36
620
617.3 21
M 24x120 36
620
696.7 24
M 24x130 36
620
899.5 24
M 24x140 36
620
925.9 28
M 24x140 36
620
M 24x140 36
620
M 27x150 41
922
Catalog W-300-2
19
Detail A
TH
dW
TW
=
=
=
=
=
Mt
D
d1
d2
L, L1,L2, e
Pax
=
=
=
=
=
=
See Detail A
and Options
Disc
s
=
MA
=
d3
=
r
=
Notes
1. Tapers and screws lubricated with Molykote Gn Paste or
equivalent.
2. For Series RfN 4051:
Sizes 125 to 260 have a thru-drilled tapped hole.
All larger sizes have a blind tapped hole.
Option 2
Option 1
125
4.921
TH
140
5.512
155
+0
6.102 .0025
165
6.496
175
6.890
185
7.283
195
7.677
200
+0
7.874 .0028
220
8.661
240
9.449
260
10.236
280
+0
11.024 .0032
300
11.811
320
12.598
340
13.386
350
13.780
360
+0
14.173 .0035
380
14.961
390
15.354
400
15.748
420
16.535
440
17.323
460
+0
18.110 .0038
480
18.898
500
19.685
dW
inches
3.740
4.134
4.331
4.921
5.118
5.512
5.315
5.709
5.709
6.102
6.102
6.496
6.496
6.890
6.890
7.283
7.087
7.874
7.874
8.465
8.661
9.252
9.055
9.843
9.843
10.630
10.630
11.417
11.417
12.008
11.811
12.205
11.811
12.598
12.598
12.992
12.992
13.780
13.386
14.173
13.780
14.567
14.567
15.354
15.354
16.142
16.142
16.732
16.732
17.323
TW
R1max.
.0027
.225
.0031
.0035
.300
.340
.380
.0040
.420
.0044
.460
.500
.0048
max.
Mt
lb-ft
7
10
10
15
17
21
23
28
28
33
34
39
46
53
54
62
61
77
83
99
109
127
126
153
158
188
191
225
221
248
274
295
265
306
320
344
372
425
405
461
426
483
499
562
619
689
657
712
727
786
782
179
916
121
702
390
603
398
766
930
372
830
469
476
582
327
073
448
349
207
902
605
130
421
584
088
776
706
280
571
387
040
536
104
856
459
488
595
680
738
333
128
355
051
584
656
202
522
274
282
d1
d2
I
L
inches
L1
L2
Wt.
lbs
Qty
Size
MA
s
mm lb-ft
7.28
6.220
.866 .236
13.2
M 10x 40
17
44
8.66
6.890
.866 .236
17.6
M 10x 40
17
44
9.65
7.559
.866 .236
22.0
11
M 10x 40
17
44
10.24
8.268
30.9 10
M 12x 50
19
74
10.83
8.661
35.3
11
M 12x 50
19
74
11.61
8.858
44.1 12
M 12x 50
19
74
12.40
9.331
59.5 15
M 12x 55
19
74
12.99
9.528
66.1 16
M 12x 55
19
74
13.58 10.433
77.2 10
M 16x 65
24
185
14.57 11.417
97.0 12
M 16x 65
24
185
105.8 14
M 16x 70
24
185
132.3 16
M 16x 75
24
185
165.3 18
M 16x 75
24
185
185.2 20
M 16x 75
24
185
220.5 21
M 16x 75
24
185
264.6 16
M 20x 90
30
362
275.6 16
M 20x 90
30
362
330.7 18
M 20x100 30
362
343.9 20
M 20x100 30
362
374.8 21
M 20x100 30
362
407.9 22
M 20x100 30
362
451.9 24
M 20x100 30
362
518.1 28
M 20x110 30
362
562.2 28
M 20x110 30
362
628.3 30
M 20x110 30
362
20
Locking screws
DIN 931 - 10.9
Catalog W-300-2
Detail A
See Detail A
and Options
Option 2
Option 1
=
=
=
=
=
125
4.921
140
5.512
155
+0
6.102 .0025
TH
165
6.496
175
6.890
185
7.283
195
7.677
200
+0
7.874 .0028
220
8.661
240
9.449
260
10.236
280
+0
11.024 .0032
300
11.811
320
12.598
340
13.386
350
13.780
360
+0
14.173 .0035
380
14.961
390
15.354
400
15.748
420
16.535
440
17.323
460
+0
18.110 .0038
480
18.898
500
19.685
dW
inches
3.346
3.740
3.740
4.134
4.134
4.528
4.528
4.921
4.921
5.315
5.315
5.709
5.512
6.102
5.709
6.102
6.299
6.693
6.693
7.480
7.480
8.268
8.268
9.055
9.055
9.646
9.449
10.236
9.843
10.630
10.630
11.220
11.024
11.614
11.417
12.205
11.811
12.598
12.402
12.992
12.992
13.780
13.386
14.173
14.173
14.961
14.961
15.748
15.748
16.535
TW
R1max.
.265
.0027
.300
.0031
.380
.0035
.460
.0040
.0044
.540
.0048
Locking screws
DIN 931 - 10.9
064
752
195
546
095
849
242
396
667
043
107
434
320
810
696
760
675
058
328
045
109
677
216
848
522
614
813
658
055
333
106
950
411
206
837
334
221
775
264
272
862
864
381
070
632
400
216
672
800
944
d2
I
inches
L1
L2
Wt.
lbs
Qty
Size
MA
s
mm lb-ft
d1
8.46
6.299
24.3 10
M 12x 50
19
74
9.06
6.890
28.7 12
M 12x 55
19
74
10.43
7.795
44.1 15
M 12x 60
19
74
11.42
8.268
57.3 10
M 16x 65
24
185
11.81
8.661
63.9 10
M 16x 65
24
185
12.99
9.291
103.6 14
M 16x 80
24
185
13.78
9.685
116.8 14
M 16x 80
24
185
13.78
9.685
110.2 15
M 16x 80
24
185
14.57 10.630
143.3 20
M 16x 90
24
185
15.94 11.614
191.8 15
M 20x100 30
362
220.5 18
M 20x110 30
362
291.0 21
M 20x120 30
362
308.6 22
M 20x120 30
362
363.8 24
M 20x130 30
362
529.1 21
M 24x130 36
620
544.5 21
M 24x130 36
620
551.1 22
M 24x140 36
620
705.5 22
M 24x140 36
620
771.6 24
M 24x140 36
620
815.7 24
M 24x140 36
620
903.9 30
M 24x150 36
620
M 27x170 41
922
M 27x170 41
922
M 27x180 41
922
M 27x180 41
92
Catalog W-300-2
21
Figure
Shrink d
See Detail A
and Options
Detail A
Note
Option 1
Option 2
RfN
RfN
Series
4071
TH
dW
inches
16.929
17.717
17.717
560 22.047
+0
18.504
.0043 18.504
590 23.228
19.291
19.685
620 24.409
20.472
20.866
660 25.984
21.654
22.047
700 27.559
+0
23.228
.0049 23.622
750 29.528
25.197
25.197
800 31.496
26.772
26.772
850 33.465
28.346
28.346
900 35.433
+0
29.921
.0055 29.921
950 37.402
31.496
31.496
1000 39.370
33.071
530
22
TW
R1max.
20.866
.480
.0048
.580
.0054
.675
.0060
.775
.0067
Locking screws
DIN 931 - 10.9
829
498
661
443
168
653
838
536
613
091
851
509
256
221
418
787
909
747
277
080
360
960
667
168
d1
d2
I
inches
L1
L2
Wt.
lbs
Qty
Size
MA
s
mm lb-ft
1554
30
M 27x180 41
922
1720
32
M 27x180 41
922
1962
36
M 27x180 41
922
2094
38
M 27x180 41
922
2734
38
M 30x220 46 1254
3351
40
M 30x220 46 1254
3616
44
M 30x220 46 1254
4090
46
M 30x220 46 1254
4409
50
M 30x250 46 1254
4850
52
M 30x250 46 1254
6922
48
M 36x260 55 2028
7496
50
M 36x260 55 2028
Catalog W-300-2
INSTALLATION
Note: Never tighten the locking screws before the shaft is
inside the hub, otherwise the hub projection may be
deformed.
A.
1.
2.
DO NOT GREASE
Shaft Seat and Hub Bore
Shaft
Hub
Figure 46: H
Shrink Disc
Shrink Disc
3.
4.
5.
6.
7.
Clean and lightly oil the hub bore and shaft seat.
Insert the shaft or slide the hub into position over the
shaft.
Tighten 3 or 4 locking screws that are equally spaced
around the diameter to establish a parallel or perpendicular position of Shrink Disc collar(s) relative to hub web or
shaft, respectively. This step properly seats the collar(s) on
the taper of the inner ring.
Using a torque wrench, tighten all locking screws gradually and in sequence all the way around (not in a diametrically opposite sequence).
Several passes may be required until all screws are
torqued to the specified tightening torque (MA).
Verify that the screws are completely tight by applying
the specified tightening torque (MA).
The gap between the Shrink Disc collars or between
the Shrink Disc collar and the hub should be even
all the way around.
5.
REMOVAL
The removal procedure is the same for all Shrink Disc types.
1. Gradually release the locking screws all the way around.
Begin by releasing each screw only about one-quarter of a
turn to avoid jamming the collars.
Note: Do NOT remove screws completely yet. The collar
may spring off.
2.
REINSTALLATION
After removal of an existing component, disassemble the Shrink
Disc. Clean and inspect all parts. Reinstall the assembly beginning with Step 2 of the applicable section procedure above.
Catalog W-300-2
23
Ringfeder
Split Shrink Discs
RfN 4071-SR, RfN 4091-SR & RfN 4051-SR
Fig. 61
Split Shrink Disc RfN 4071-SR
mounted on one side of a hub,
a projection like type RfN 4071.
24
Catalog W-300-2
Fig. 67-a
Drive coupling consisting of combination torque
limiter FC 350 and MMS 1000 coupling for people
mover at an airport. The coupling half is mounted
with a 4071 Shrink Disc.
Fig. 67-b
Catalog W-300-2
25
Selection Guide
1.
Determine the shaft diameter (dw) to be used or the maximum torque (Mt) to be transmitted.
Note: For hollow shaft applications, please consult
Ringfeder Corporation.
2.
4.
Ordering Example
Size
140
140
RfN
RfN
RfN
Series-Type X = (?)
4071-SR
X = 2
4071-HT
X = 2
Type HT
(clearance holes in hub)
See Detail A
Detail A
U1, U2
MA
Pax
26
Catalog W-300-2
Shaft/Hub dimensions
RfN
4071
Size
24
.945
30
1.181
36
1.417
44
1.732
50
1.969
55
2.165
62
2.441
68
2.677
75
2.953
80
3.150
TH
+0
.0013
+0
.0015
+0
.0018
90
3.543
100
+0
3.937 .0021
110
4.331
125
4.921
140
5.512
155
6.102
165
6.496
175
+0
.0025
6.890
185
7.283
195
7.677
200
+0
7.874
.0028
8.661
220
240
9.449
260
10.236
300
+0
11.024 .0032
11.811
320
12.598
340
13.386
350
13.780
360
280
380
+0
14.173
.0035
14.961
390
15.354
400
15.748
420
16.535
440
17.323
460
480
+0
18.110 .0038
18.898
500
19.685
dW
inches
.748
.827
.945
1.024
1.102
1.220
1.339
1.417
1.496
1.654
1.654
1.890
1.890
2.047
1.969
2.362
2.165
2.559
2.362
2.756
2.559
2.953
2.756
3.150
2.953
3.346
3.346
3.740
3.740
4.134
4.134
4.528
4.528
4.921
4.921
5.315
5.315
5.709
5.512
6.102
5.906
6.299
6.299
6.693
6.693
7.480
7.480
8.268
8.268
9.055
9.055
9.646
9.449
10.236
9.843
10.630
10.630
11.220
11.024
11.614
11.417
12.205
11.811
12.598
12.402
12.992
12.992
13.780
13.386
14.173
14.173
14.961
14.961
15.748
15.748
16.535
TW
.0007
R1max.
.050
.0013
.090
.110
.0019
.130
.0027
.190
.0031
.290
.0035
.330
.0040
.0044
.390
.0048
max.
Mt
lb-ft
1
1
1
1
2
1
2
2
3
3
5
5
6
5
7
8
11
11
14
16
20
22
28
26
33
38
45
47
60
54
63
70
81
88
115
120
151
160
199
202
232
230
275
287
339
326
368
341
385
418
485
460
529
494
548
575
663
594
676
737
840
862
966
967
1 073
125
184
221
273
325
465
524
634
693
018
856
387
365
770
475
323
844
914
360
393
504
348
089
638
311
966
114
064
138
826
227
653
866
766
554
192
355
731
944
114
582
434
072
136
512
066
966
208
059
152
840
344
131
862
664
296
019
800
509
027
219
341
262
597
192
774
328
840
506
379
600
864
992
256
731
208
U1
U2
inches
MA
lb-ft
M5
.281 .219
M5
.281 .219
.394 .108
M6
10 .328 .266
.433 .108
M6
10 .328 .266
.797
.472 .108
M6
10 .328 .266
.699
.856
.512 .148
M6
10 .328 .266
.551
.699
.856
.512 .148 10
M6
10 .328 .266
.551
.699
.856
.512 .148 10
M6
10 .328 .266
3.110
.630
.778
.994
.551 .148
M8
13 .406 .359
22
3.937
3.307
.630
.778
.994
.551 .148
M8
13 .406 .359
22
6.10
4.488
3.701
.728
.906 1.122
.669 .177 10
M8
13 .406 .359
22
6.69
4.822
4.094
.748 .197 12
M8
13 .406 .359
22
7.28
5.354
4.488
.866 .217
M10
17 .500 .438
44
8.46
6.299
17 .500 .438
44
d1
d2
W
W1
inches
W2
L2
Qty Size
1.97
1.417
1.024
.354
.463
.600
.315 .108
2.36
1.732
1.260
.394
.502
.640
.354 .108
2.83
2.047
1.496
.433
.541
.699
3.15
2.402
1.850
.492
.600
.758
3.54
2.756
2.087
.531
.640
3.94
2.953
2.283
.551
4.33
3.386
2.598
4.53
3.386
2.835
5.43
3.937
5.71
9.06
6.890
19 .594 .531
74
10.43
7.559
19 .594 .531
74
11.42
8.268
M16
24 .750 .719
185
11.81
8.661
M16
24 .750 .719
185
12.99
9.291
24 .750 .719
185
13.78
9.685
24 .750 .719
185
13.78
9.685
24 .750 .719
185
14.57 10.630
24 .750 .719
185
15.94 11.614
30 .906 .875
362
30 .906 .875
362
30 .906 .875
362
30 .906 .875
362
30 .906 .875
362
30 .906 .875
362
30 .906 .875
362
30 .906 .875
362
36 1.063 1.031
620
36 1.063 1.031
620
36 1.063 1.031
620
36 1.063 1.031
620
36 1.063 1.031
620
36 1.063 1.031
620
36 1.063 1.031
620
41 1.188 1.156
922
Catalog W-300-2
27
Type SR
Detail A
See Detail A
TH
dW
TW
=
=
=
=
=
Mt
D
d1
d2
Pax
=
=
=
=
=
=
Type HT
(clearance
holes in hub)
Type HC
(threaded
holes in hub)
Notes
Shaft/Hub dimensions
RfN
4051
Size
125
4.921
TH
140
5.512
155
6.102
165
6.496
175
6.890
185
7.283
195
7.677
200
220
+0
7.874
.0028
8.661
240
9.449
+0
.0025
260
10.236
280
300
+0
11.024 .0032
11.811
320
12.598
340
13.386
350
13.780
360
380
+0
14.173
.0035
14.961
390
15.354
400
15.748
420
16.535
440
17.323
460
+0
18.110
.0038
18.898
480
500
19.685
dW
inches
3.740
4.134
4.331
4.921
5.118
5.512
5.315
5.709
5.709
6.102
6.102
6.496
6.496
6.890
6.890
7.283
7.087
7.874
7.874
8.465
8.661
9.252
9.055
9.843
9.843
10.630
10.630
11.417
11.417
12.008
11.811
12.205
11.811
12.598
12.598
12.992
12.992
13.780
13.386
14.173
13.780
14.567
14.567
15.354
15.354
16.142
16.142
16.732
16.732
17.323
TW
R1max.
.0027
.0031
.190
.0035
.250
.0040
.0044
.330
.390
.0048
max.
Mt
lb-ft
7
10
10
15
17
21
23
28
28
33
34
39
46
53
54
62
61
77
83
99
109
127
126
153
158
188
191
225
221
248
274
295
265
306
320
344
372
425
405
461
426
483
499
562
619
689
657
712
727
786
782
179
916
121
702
390
603
398
766
930
372
830
469
476
582
327
073
448
349
207
902
605
130
421
584
088
776
706
280
571
387
040
536
104
856
459
488
595
680
738
333
128
355
051
584
656
202
522
274
282
W2
L2
Qty Size
d1
d2
7.28
6.220
5.079
.866 .236
M10
17 .500 .438
44
8.66
6.890
5.669
.866 .236
M10
17 .500 .438
44
9.65
7.559
6.260
.866 .236
11
M10
17 .500 .438
44
10.24
8.268
19 .594 .531
74
10.83
8.661
M12
19 .594 .531
74
11.61
8.858
19 .594 .531
74
12.40
9.331
19 .594 .531
74
12.99
9.528
19 .594 .531
74
13.58 10.433
24 .750 .719
185
14.57 11.417
24 .750 .719
185
24 .750 .719
185
.394 16 M16
24 .750 .719
185
11
s
mm
U1
U2
inches
MA
lb-ft
.394 18 M16
24 .750 .719
185
24 .750 .719
185
24 .750 .719
185
30 .906 .875
362
30 .906 .875
362
30 .906 .875
362
30 .906 .875
362
30 .906 .875
362
30 .906 .875
362
30 .906 .875
362
30 .906 .875
362
30 .906 .875
362
30 .906 .875
362
28
W
W1
inches
Catalog W-300-2
Type SR
Detail A
See Detail A
TH
dW
TW
=
=
=
=
=
Mt
D
d1
d2
Pax
=
=
=
=
=
=
Notes
Fig. 73: Half Shrink
nominal Shrink
I.D.
hub projection O.D.
specified tolerance for hub O.D. (d)
shaft size range (min.- max.)
total allowable diametrical clearance
between shaft and hub bore (dW)
maximum transmissible torque
Shrink Disc O.D.
bolt circle dia.
thrust ring I.D.
axial load (thrust capacity)
Mt x 24 lbs (for M in lb-ft)
t
dW
Type HT
(clearance
holes in hub)
Type HC
(threaded
holes in hub)
Disc
Discs
Shaft/Hub dimensions
RfN
4091
Size
125
4.921
140
5.512
155
6.102
165
6.496
175
6.890
TH
+0
.0025
185
7.283
195
7.677
200
+0
7.874
.0028
8.661
220
240
9.449
260
10.236
280
300
+0
11.024 .0032
11.811
320
12.598
340
13.386
350
13.780
360
380
+0
14.173
.0035
14.961
390
15.354
400
15.748
420
16.535
440
17.323
460
18.110
480
18.898
500
19.685
+0
.0038
dW
inches
3.346
3.740
3.740
4.134
4.134
4.528
4.528
4.921
4.921
5.315
5.315
5.709
5.512
6.102
5.709
6.102
6.299
6.693
6.693
7.480
7.480
8.268
8.268
9.055
9.055
9.646
9.449
10.236
9.843
10.630
10.630
11.220
11.024
11.614
11.417
12.205
11.811
12.598
12.402
12.992
12.992
13.780
13.386
14.173
14.173
14.961
14.961
15.748
15.748
16.535
TW
R1max.
.130
.0027
.190
.0031
.250
.0035
.330
.0040
.390
.0044
.490
.0048
max.
Mt
lb-ft
11
14
15
19
21
26
30
37
34
42
53
63
55
70
62
73
93
108
114
146
157
197
210
261
251
290
278
332
361
426
410
463
451
508
455
530
522
600
564
623
736
840
780
888
973
1106
1132
1 268
1 200
1 430
064
752
195
546
095
849
242
396
667
043
107
434
320
810
696
760
675
058
328
045
109
677
216
848
522
614
813
658
055
333
106
950
411
206
837
334
221
775
264
272
862
864
381
070
632
400
216
672
800
944
d2
W
W1
inches
W2
Qty Size
s
mm
U1
U2
inches
MA
lb-ft
d1
8.46
6.299
19 .594 .531
74
9.06
6.890
19 .594 .531
74
10.43
7.795
19 .594 .531
74
11.42
8.268
24 .750 .719
185
11.81
8.661
24 .750 .719
185
12.99
9.291
24 .750 .719
185
13.78
9.685
24 .750 .719
185
13.78
9.685
24 .750 .719
185
14.57 10.630
24 .750 .719
185
15.94 11.614
30 .906 .875
362
30 .906 .875
362
30 .906 .875
362
30 .906 .875
362
30 .906 .875
362
36 1.063 1.031
620
36 1.063 1.031
620
36 1.063 1.031
620
36 1.063 1.031
620
36 1.063 1.031
620
36 1.063 1.031
620
36 1.063 1.031
620
41 1.188 1.156
922
41 1.188 1.156
922
41 1.188 1.156
922
41 1.188 1.156
922
Catalog W-300-2
29
This new RfN 4171 Shrink Disc employs a single long shallow taper
instead of opposing tapers of the traditional Ringfeder three-piece series
(RfN 4071). Better centering and concentricity result, making the shrink
disc especially suitable for high-speed applications where balance is critical.
Installation is also simplified. When the fasteners are properly torqued, the
installer has a visual aid to indicate correct installation; i.e., the inner ring
face should be flush with the outer ring face. Always use a torque wrench
to properly tighten screws.
dW
24
0.945
30
1.181
36
1.417
44
1.732
50
1.969
55
2.165
62
2.441
68
2.677
75
2.953
80
3.150
90
3.543
100
30
3.937
TH
inches
+0
.0013
+0
.0015
+0
.0018
+0
.0021
shaft
range
dW
0.748
0.827
0.945
1.024
1.102
1.220
1.339
1.417
1.496
1.654
1.654
1.890
1.890
2.047
1.969
2.362
2.165
2.559
2.362
2.756
2.559
2.953
2.756
3.150
Locking Screws
DIN 931 - 10.9
Shaft/Hub dimensions
RfN
4171
size
TW
.0010
.0020
.0023
Mt
lb-ft
136
180
288
353
483
584
535
634
907
1 180
1 124
1 604
1 315
1 595
1 447
2 287
2 268
3 437
2 561
3 754
3 574
5 112
4 595
6 417
L1
inches
d1
Qty.
Size
MA
lb-ft
Weight
lbs
1.97
0.866
0.709
0.630
0.079
1.417
M6
0.4
2.36
0.945
0.787
0.709
0.079
1.732
M6
0.7
2.83
1.102
0.866
0.787
0.079
2.047
M8
22
1.0
3.15
1.181
0.945
0.866
0.079
2.402
M8
22
1.2
3.54
1.260
1.024
0.945
0.118
2.677
M8
22
1.7
3.94
1.378
1.142
1.024
0.118
2.835
M8
22
2.5
4.33
1.378
1.142
1.024
0.118
3.150
M8
22
2.9
4.53
1.378
1.142
1.024
0.118
3.386
M8
22
3.0
5.43
1.496
1.220
1.063
0.157
3.937
M 10
44
4.9
5.71
1.496
1.220
1.063
0.157
4.094
M 10
44
5.3
6.10
1.772
1.496
1.339
0.157
4.488
10
M 10
44
7.3
6.69
1.969
1.693
1.535
0.157
4.882
12
M 10
44
9.9
Catalog W-300-2
RfN
4171
size
110
4.331
125
4.921
140
5.512
155
6.102
165
6.496
175
6.890
185
7.283
200
7.784
220
8.661
240
9.449
260
10.236
280
11.024
300
11.811
320
12.598
340
13.386
360
14.173
380
14.961
390
15.354
400
15.748
420
16.535
440
TH
inches
+0
.0021
+0
.0025
+0
.0028
+0
.0032
+0
.0035
17.323
460
18.110
480
18.898
500
19.685
+0
.0038
shaft
range
dW
3.150
3.543
3.543
3.937
3.937
4.331
4.331
4.724
4.724
5.118
5.118
5.512
5.512
5.906
5.906
6.299
6.299
6.693
6.693
7.480
7.480
8.268
8.268
9.055
9.055
9.646
9.449
10.236
10.039
10.630
11.024
11.811
11.811
12.402
12.205
12.598
12.402
12.795
12.795
13.189
12.992
13.780
13.780
14.764
14.764
15.748
15.748
16.535
Locking Screws
DIN 931 - 10.9
Shaft/Hub dimensions
Mt
lb ft
TW
.0027
.0031
.0035
.0040
.0044
.0048
6 594
8 639
8 925
11 580
11 359
14 014
15 490
19 178
19 915
23 603
27 291
32 454
36 511
43 150
44 994
52 738
72 285
82 611
84 824
107 690
118 016
147 520
143 094
176 286
206 528
236 770
221 280
263 323
263 323
298 728
331 920
387 240
354 048
396 829
371 013
396 829
418 957
446 248
442 560
473 539
499 355
569 427
562 051
638 024
678 592
764 154
775 955
861 517
L1
d1
Qty.
Size
MA
lb ft
inches
Weight
lbs
7.28
2.244
1.929
1.732
0.197
5.354
10
M 12
74
13.5
8.46
2.402
2.087
1.890
0.236
6.299
12
M 12
74
19.8
9.06
2.638
2.283
2.047
0.236
6.811
10
M 14
118
24.3
10.35
2.795
2.441
2.205
0.236
7.480
12
M 14
118
34.4
11.42
3.071
2.677
2.402
0.276
8.031
10
M 16
184
48.5
11.81
3.071
2.677
2.362
0.315
8.425
12
M 16
184
50.7
12.99
3.740
3.346
3.031
0.315
8.819
14
M 16
184
79.4
13.78
3.740
3.346
3.031
0.315
9.449
16
M 16
184
88.2
14.57
4.567
4.055
3.701
0.354
10.630
16
M 20
361
116.9
15.94
4.724
4.213
3.819
0.394
11.654
18
M 20
361
145.5
16.93
5.197
4.685
4.291
0.394
12.521
21
M 20
361
178.6
18.11
5.709
5.197
4.803
0.394
13.386
22
M 20
361
224.9
19.09
6.102
5.512
5.118
0.394
14.173
20
M 24
620
260.2
20.47
6.102
5.512
5.118
0.394
14.961
21
M 24
620
302.1
22.05
6.693
6.102
5.630
0.472
15.827
22
M 24
620
392.5
23.23
6.850
6.260
5.787
0.472
16.693
24
M 24
620
445.4
25.00
7.087
6.417
5.866
0.551
17.638
18
M 27
922
765.1
25.00
7.087
6.417
5.866
0.551
18.031
18
M 27
922
529.2
25.59
7.480
6.811
6.260
0.551
18.701
20
M 27
922
575.3
26.38
7.874
7.205
6.614
0.591
19.488
21
M 27
922
648.3
28.35
8.268
7.598
7.008
0.591
20.394
24
M 27
922
811.4
30.31
8.268
7.598
7.008
0.591
21.181
25
M 27
922
948.2
31.50
9.055
8.386
7.795
0.591
21.969
27
M 27
922
1133.4
33.46
9.055
8.386
7.795
0.591
22.835
28
M 27
922
1301.0
Catalog W-300-2
31
These low inertia units are designed for applications where maximum clamping is needed and minimum weight is desired. These Shrink Discs offer the
flexibility of the standard RfN 4071 units for smaller shaft sizes. Available for
shafts from 1/4 to 1-11/16 inches. Special sizes and material on request.
Mt
D
d1
d2
L, L1, e
L2
AF
MA
s
Detail A
Size
d
inches
TH
mm
dW
6
6.35
8
9
+0
13 RFC 4073 0.512 .001
9.5
11
12
16 RFC 4051 0.630
12.7
14
16
24 RFC 4051 0.945
19
+0
20
.0013 22.2
30 RFC 4051 1.181
24
26
27
36 RFC 4051 1.417
28
28.6
32
+0
34
44 RFC 4051 1.732 .0015 34.93
37
38
50 RFC 4051 1.969
41.28
42.85
10 RFC 4073 0.394
inches
.236
.250
.315
.354
.375
.433
.472
.500
.551
.630
.748
.787
.875
.945
1.024
1.063
1.102
1.125
1.260
1.339
1.375
1.457
1.496
1.625
1.687
TW
R1
max.
Mt
lb-in
0.065
36
55
144
200
250
410
460
554
730
980
500
750
900
300
800
500
130
365
690
400
900
900
400
000
000
0.0005
0.0007
0.0010
0.0013
1
1
1
2
2
3
4
4
5
5
5
6
6
8
9
d1
d2
I
inches
L1
L2
AF Qty.
Size
s
mm
MA
lb-in
1.18
M4x10
12
1.30
M5x10
25
1.50
M5x12
25
M5x14
30
2.10
M5x16
30
2.50
M6x18 10
75
2.85
M6x20 10
75
3.19
M6x20 10
75
32
Locking Screws
DIN 933 - 10.9 HHCS
Shaft/Hub dimensions
Catalog W-300-2
7a
Detail
Fig. 77
d
TH
dW
TW
Mt
D
=
=
=
=
=
d1
d2
L, L1, e
s
MA
d3
r
=
=
=
=
=
=
=
Pax
RfC
4091
Size
40
1.575
44
1.732
50
1.969
55
2.165
62
2.441
68
2.677
75
2.953
80
3.150
90
3.543
100
3.937
110
4.331
TH
dW
inches
+0/-0.0015
+0/-0.0018
+0/-0.0021
1.18
1.34
1.34
1.42
1.50
1.65
1.65
1.89
1.89
2.05
1.97
2.36
2.17
2.56
2.36
2.76
2.56
2.95
2.786
3.15
2.95
3.35
TW
Locking screws
DIN 931 - 10.9
Shaft/Hub dimensions
R1max.
0.065
0.0016
0.105
0.0019
0.145
0.165
0.185
Mt
lb-ft
1
1
1
2
1
2
2
2
2
3
3
5
4
6
4
7
6
8
8
10
693
994
070
254
600
070
783
509
176
655
360
835
319
163
204
196
942
081
491
998
113
842
d1
d2
3.15
2.441
1.730
3.35
2.598
3.74
I
inches
L1
0.984 1.260
1.477
1.890
1.102 1.339
2.874
2.126
4.13
3.071
4.53
3.346
4.72
MA
Qty
Size
0.14
M8x30
13
22
1.556
0.10
M8x30
13
22
1.181 1.535
1.752
0.18
M8x35
13
22
2.323
1.181 1.535
1.752
0.18
M8x35
13
22
2.598
1.181 1.535
1.752
0.18
M8x35
13
22
3.622
2.835
1.181 1.535
1.752
0.18
M8x35
13
22
5.71
4.134
3.307
1.417 1.811
2.086
0.20
M10x40
17
44
5.71
4.134
3.307
1.417 1.811
2.086
0.20
M10x40
17
44
6.30
4.567
3.701
1.575 1.969
2.244
0.20
M10x40
17
44
6.69
4.961
4.094
1.732 2.126
2.401
0.20
10
M10x45
17
44
7.28
5.433
4.488
1.969 2.362
2.637
0.20
12
M10x45
17
44
(mm) lb-ft
Catalog W-300-2
33
Ringfeder
Locking ElementsTM
RfN 8006/GSA
RfN 8006
Type GSA
Design Examples
Fig. 78
Hub-bolted clamp flange (hub axially adjustable)
Fig. 80
Hub-bolted Locking ElementTM connection.
A spacer sleeve between the locking
elements provides wider support.
Fig. 79
Shaft-bolted clamp flange (hub axially fixed).
Fig. 81
Hub-bolted Locking ElementTM connection.
The hub is mounted with two RfN 8006 locking elements in series. The clamp ring is
accommodated in the recessed hub.
Fig. 83
Shaft-bolted Locking ElementTM connection.
The hub is mounted using two RfN 8006
Locking ElementsTM.
Fig. 82
Hub-bolted Locking ElementTM connection,
double clamped. Here, four RfN 8006 Locking
ElementsTM can transmit approximately 300%.
Fig. 84
Shaft-bolted Locking ElementTM connection. The hub
is mounted with one RfN 8006 Locking ElementTM.
34
Fig. 85
Hub-bolted Locking ElementTM connection. The hub is
mounted with one RfN 8006 Locking ElementTM. Here, the
locking screws can be tightened from the left or the right.
Catalog W-300-2
Selection Guide
Note: Slit and solid Locking ElementsTM are available. Slit elements can be expanded or contracted from the nearest listed
metric size to accommodate many common inch-size shafts.
Solid elements must be used with metric shaft sizes and are
generally applied when frequent locking and releasing is required.
1. Determine the shaft diameter (d) to be used or the maximum
transmissible torque (Mt):
5252 x HP
Torque Mt =
(lb-ft)
RPM
If combined torsional and axial loads are to be transmitted,
calculate the torque as follows:
Mt res =
2.
3.
4.
5.
Mt2 +
( P 24x d )
ax
Mt cat
c)
6.
YP + 0.8 x p
YP 0.8 x p
+ db
S.A.E. Grade 5
S.A.E. Grade 8
Bolt Size
Load*
(lbs)
Torque
(lb-in)
Load*
(lbs)
Torque
(lb-in)
Load*
(lbs)
Torque
(lb-in)
4 - 40
4 - 48
6 - 32
6 - 40
8 - 32
8 - 36
10 - 24
10 - 32
250
275
375
420
580
610
725
825
5
6
10
12
19
20
27
31
380
420
580
640
900
940
1 120
1 285
8
9
16
18
30
31
43
49
540
600
820
920
1 260
1 320
1 580
1 800
12
13
23
25
41
43
60
68
1/4 - 20
1/4 - 28
5/16 - 18
5/16 - 24
3/8 - 16
3/8 - 24
7/16 - 14
7/16 - 20
1/2 - 13
1/2 - 20
9/16 - 12
9/16 - 18
(lbs)
1 300
1 500
2 150
2 400
3 200
3 600
4 400
4 900
5 850
6 550
7 550
8 350
(lb-ft)
5
6
11
13
20
22
30
35
50
55
70
80
(lbs)
2 000
2 300
3 350
3 700
4 950
5 600
6 800
7 550
9 050
10 200
11 600
13 000
(lb-ft)
8
10
17
19
30
35
50
55
75
85
110
120
(lbs)
2 850
3 250
4 700
5 200
6 950
7 900
9 600
10 700
12 800
14 400
16 400
18 300
(lb-ft)
12
14
24
27
45
50
70
80
105
120
115
170
Catalog W-300-2
35
RfN
RfN
RfN
Series-Type
8006/ SOLID
8006/ SLIT
9
10
11
12
13
15
16
18
19
20
21
22
24
25
26
28
30
32
35
36
40
42
44
45
48
52
55
57
62
64
68
71
73
79
80
84
91
96
101
106
114
124
134
148
158
168
.236
.276
.315
.354
.394
.473
.512
.551
.591
.630
.669
.709
.748
.787
.866
.945
.984
1.102
1.181
1.260
1.378
1.417
1.4986
1.575
1.654
1.772
1.890
1.969
2.165
2.205
2.362
2.480
2.559
2.756
2.795
2.953
3.150
3.346
3.543
3.740
3.937
4.331
4.724
5.118
5.512
5.906
T1
Tb
+0
.0004
0
+.0006
+0
.0004
+0
.0005
+0
.0006
+0
.0018
0
+.0007
0
+.0008
0
+.001
0
+.0018
+0
.0022
0
+.0022
+0
.0025
0
+.0025
T2
.354
.394
.433
.473
.512
.591
.630
.709
.748
.787
.827
.866
.945
.984
1.024
1.102
1.181
1.260
1.378
1.417
1.575
1.654
1.732
1.772
1.890
2.047
2.165
2.244
2.441
2.520
2.677
2.795
2.874
3.110
3.150
3.307
3.583
3.780
3.976
4.173
4.488
4.882
5.276
5.827
6.220
6.614
0
+.0006
0
+.0007
0
+.0008
0
+.001
0
+.0018
0
+.0022
0
+.0025
L
.177
.177
.177
.177
.177
.177
.177
.248
.248
.248
.248
.248
.248
.248
.248
.248
.248
.248
.248
.248
.276
.276
.276
.315
.315
.394
.394
.394
.394
.472
.472
.472
.472
.551
.551
.551
.669
.669
.669
.669
.827
.827
.827
1.102
1.102
1.102
I
.146
.146
.146
.146
.146
.146
.146
.209
.209
.209
.209
.209
.209
.209
.209
.209
.209
.209
.209
.209
.236
.236
.236
.260
.260
.339
.339
.339
.339
.409
.409
.409
.409
.480
.480
.480
.591
.591
.591
.591
.736
.736
.736
.996
.996
.996
1 672
1 529
1 529
1 419
2 464
2 365
2 222
2 101
2 002
2 772
2 561
1 991
1 837
2 178
1 628
1 870
1 727
2 222
2 552
2 420
3 036
3 432
6 204
5 412
5 170
4 796
6 468
6 028
5 786
5 580
6 820
6 820
7 612
10 560
10 032
9 548
9 064
13 354
14 520
13 244
21 164
19 580
18 590
1
1
1
1
2
2
3
3
3
3
3
4
4
4
5
5
6
7
8
8
9
10
14
15
16
17
21
23
24
25
31
32
34
44
47
50
53
69
76
83
122
132
141
36
Catalog W-300-2
713
832
946
254
386
650
793
772
970
168
366
564
762
960
356
752
950
544
940
336
832
052
514
900
340
520
400
060
600
780
320
420
300
900
340
100
660
520
380
240
740
780
600
760
000
460
Mt
(based on
p=14220 psi)
lb-ft
1.56
2.13
2.78
4.12
5.06
7.23
8.53
14.18
16.27
18.44
20.90
23.43
26.04
28.93
34.72
41.95
44.84
56.42
65.10
73.78
99.82
106.33
117.90
143.94
158.40
237.24
269.79
292.94
354.42
444.83
509.93
564.17
600.34
810.10
839.03
933.06
1 309.17
1 475.53
1 656.36
1 844.42
2 546.02
3 074.03
3 652.67
5 822.57
6 762.86
7 739.31
X
2
R
3
Elements inches
.08
.08
.08
.08
.08
.08
.08
.12
.12
.12
.12
.12
.12
.12
.12
.12
.12
.12
.12
.12
.12
.12
.12
.12
.12
.12
.12
.12
.12
.12
.12
.12
.12
.12
.12
.12
.16
.16
.16
.16
.16
.16
.16
.20
.20
.20
.08
.08
.08
.08
.08
.08
.08
.12
.12
.12
.12
.12
.12
.12
.12
.12
.12
.12
.12
.12
.12
.12
.12
.16
.16
.16
.16
.16
.16
.16
.16
.16
.16
.20
.20
.20
.20
.20
.20
.20
.24
.24
.24
.28
.28
.28
.12
.12
.12
.12
.12
.12
.12
.16
.16
.16
.16
.16
.16
.16
.16
.16
.16
.16
.16
.16
.16
.16
.16
.20
.20
.20
.20
.20
.20
.20
.20
.20
.20
.24
.24
.24
.24
.24
.24
.24
.28
.28
.28
.35
.35
.35
inches
.004
.004
.004
.004
.004
.004
.004
.004
.004
.004
.004
.004
.004
.004
.004
.004
.004
.004
.004
.004
.004
.004
.004
.004
.004
.008
.008
.008
.008
.008
.008
.008
.008
.012
.012
.012
.012
.012
.012
.012
.016
.016
.016
.016
.016
.016
Spacer sleeve
inches
d1
T3
D1
.240
.280
.319
.358
.398
.476
.516
.555
.594
.634
.673
.712
.756
.795
.874
.952
.992
1.110
1.189
1.268
1.386
1.425
1.504
1.583
1.661
1.779
1.897
1.976
2.173
2.212
2.370
2.488
2.567
2.768
2.807
2.964
3.161
3.358
3.555
3.752
3.949
4.342
4.736
5.134
5.527
5.921
.001
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
PA
lbs
PO
lbs
.0015
6
7
8
9
10
12
13
14
15
16
17
18
19
20
22
24
25
28
30
32
35
36
38
40
42
45
48
50
55
56
60
63
65
70
71
75
80
85
90
95
100
110
120
130
140
150
.002
RfN 8006
Size
dxD
mm
.350
.390
.429
.468
.508
.586
.626
.705
.744
.783
.823
.862
.937
.976
1.015
1.094
1.173
1.252
1.370
1.409
1.567
1.645
1.724
1.764
1.882
2.039
2.157
2.236
2.433
2.512
2.669
2.787
2.866
3.098
3.137
3.295
3.570
3.767
3.964
4.161
4.476
4.870
5.263
5.811
6.204
6.598
INSTALLATION
3.
Hub
Shaft
4.
1. Carefully clean and lightly oil the shaft, hub bore, spacer
sleeves and Locking ElementsTM.
REMOVAL
Tighten the locking screws evenly and in several steps following the diametrically opposite sequence illustrated in
Fig. 88.
a ) Tighten the screws by hand until a slight positive contact is established. Make final alignment adjustments to
the connection.
b ) Tighten the screws to approx. one-half the specified
torque using an extended key or torque wrench.
c ) Tighten the screws to full tightening torque using a
torque wrench.
d ) Verify that the screws are fully tightened by applying
the specified torque.
Check distance x. The clamp ring should not make contact
with the face of the hub. The gap between the clamp ring
and hub face should be even all the way around.
1.
2.
3.
Catalog W-300-2
37
Clearance
= shaft diameter
= machining tolerances for shaft (d)
= counter bore diameter
= machining tolerances for counter bore (D)
= width dimensions, relaxed condition
= radius in hub bore
= preload to bridge specified fit clearances
= actual locking force to generate Mt
Mt
Selection Guide
1.
2.
3.
Determine the required locking force (PA) from Table 19. A preload (PO) is required to bridge the clearance for the specified fits.
The total required locking force is PA = PO + PA.
The locking force is normally obtained by using one or more
screws and a clamp plate (see Fig. 80 and Fig. 81).
4.
Refer to Table 16: Clamp Load on page 33 to determine the number, size and grade of screws needed for the required locking
force and individual screw clamp load.
required locking force (PA) of PA
Clamp load/screw =
number of screws (z)
63,000 x HP
(inch-lbs)
RPM
Select a locking element from the specification table for the shaft
diameter. Verify that the transmissible torque (Mt) for the element
meets the torque requirement.
Note: Required peak torque should never exceed specified transmissible torque (Mt ). Higher torque capacitites can be obtained by
increasing the locking force.
GSA250
GSA312
GSA375
GSA437
GSA500
*GSA562
GSA625
*GSA687
GSA750
GSA812
GSA875
*GSA937
GSA1000
GSA1125
GSA1250
GSA1375
GSA1500
GSA1625
GSA1750
GSA1875
*GSA2000
*GSA2250
GSA2437
*GSA2500
GSA2687
*GSA2750
*GSA3000
.250
.3125
.375
.4375
.500
.5625
.625
.6875
.750
.8125
.875
.9375
1.000
1.125
1.250
1.375
1.500
1.625
1.750
1.875
2.000
2.250
2.437
2.500
2.687
2.750
3.000
T1
+0
.0005
+0
.001
+0
.0015
+0
.002
+0
.003
D
inches
.375
.4375
.500
.5937
.6562
.750
.8125
.875
.9375
1.0312
1.0937
1.1875
1.250
1.406
1.531
1.687
1.812
1.968
2.125
2.250
2.406
2.656
2.843
2.906
3.093
3.156
3.406
T2
-0
+.0005
0
+.001
0
+.0015
0
+.002
0
+.003
.126
.143
.160
.176
.193
.210
.226
.243
.260
.276
.293
.310
.326
.359
.393
.426
.459
.492
.526
.559
.592
.592
.592
.592
.592
.592
.592
.094
.112
.128
.143
.158
.174
.187
.203
.219
.234
.250
.267
.284
.312
.344
.376
.407
.437
.469
.500
.528
.528
.528
.528
.528
.528
.528
38
Catalog W-300-2
PO
lbs
1
1
1
1
1
1
2
2
2
2
2
3
3
3
3
5
4
4
4
4
3
3
580
686
673
796
944
259
231
414
413
617
611
087
090
220
240
745
030
295
585
595
365
795
430
330
035
950
890
PA
lbs
1
1
1
2
2
3
3
4
4
5
6
8
9
11
13
15
17
19
22
24
24
26
27
29
450
670
920
196
512
872
237
670
145
637
188
790
437
620
105
750
510
390
475
675
910
400
260
885
750
370
860
Mt
lb-in
Wt.
lbs per
1000
14
26
43
65
94
132
175
230
295
370
458
561
680
840
140
510
940
450
045
730
480
670
655
000
090
470
080
.76
1.04
1.35
2.20
2.69
3.97
4.69
5.47
6.33
8.56
10.14
12.36
14.05
19.55
23.54
31.22
36.38
46.43
58.53
66.22
81.09
90.30
97.07
99.50
106.26
108.70
117.90
1
1
1
2
3
3
4
5
6
7
8
8
10
Torque Wrenches
Torque wrenches are an integral part of the proper installation of all Ringfeder
locking devices. We, therefore, offer a low profile head torque wrench specifically
suited to our products.
Various accessories
are available upon
request. Call our
technical department
for assistance.
Fig. 92
Fig. 93
Catalog W-300-2
B
C
D
E
in.
in.
in.
in.
9/16
-3/4
3/4
-11/16
7/8
-7/8
1-1/8 -13/16
7/8 11-1/8 -13/16
1-1/2 1-13/32 1-1/2 1-
39
Table 21
Table 22
Table 23
Table 24
Table 25
40
Catalog W-300-2
Adjustablility
10
Fretting / Galling
Centering action
Guiding action of the shaft in the minor bore of the hub. The clearance
between shaft and hub bore and the length of the minor bore have the
greatest effect on
True running of the mounted hub.
Fretting corrosion
Corrosion between the contact surfaces of ferrous metals. Even the
smallest relative movements favour and accelerate fretting corrosion;
lubricants can delay the process, but not stop it altogether. Long-term
prevention of fretting corrosion can be achieved only by designing the
connection in such a way that relative movement is impossible.
Molykote
Trade name of a lubricant containing molybdenum disulphide (MoS2). As
MoS2 reduces the
Coefficient of friction, it is used for frictional connections between shafts and hubs in exceptional cases only. We urgently
recommend that our advice be sought if it is intended that lubricants containing MoS2 be used in conjunction with internal locking devices.
Shrink Discs, however, utilize MoS2 greases to lubricate tapers and fasteners to gain the mechanical advantage necessary for their proper function.
Fig. 94
Locking AssemblyTM RINGFEDER 7012 Connection.
Principle sketch.
Notch factor k
Clearances
Coefficient of friction
The catalog values apply to = 0.12. Surfaces of the Locking Devices,
shaft and hub bore slightly oiled.
Product of the
Shape factor k (governed by material configuration)
and the
Notch factor k (governed by material properties):
k 1
k =
k 1
Approximate values for k:
0,4 ... 0,8 light metals and C-steels
0,6 ... 1 heat-treatable steels
Catalog W-300-2
41
10
Releasability
Slip
Locking AssembliesTM RfN 7012 and Locking Elements 8006 are not selflocking. The angle of the tapered rings is such that releasability is guaranteed even after prolonged heavy loading. Extractors are not required.
Rust
Because of the relatively high pressures per unit of area, rusting cannot
take place between the effective surfaces of a locking device as well as
shaft and hub. Some locking devices have split inner and outer rings and
cannot hermetically seal the clamping point. In this case we advise to use
corrosion inhibitors, seals, etc. in order to protect the Locking
AssembliesTM (locking screws) against corrosion.
Safety
The frictional connection values given in the tables are achieved or even
exceeded if designing is correct and the connection properly made. The
theoretical values are higher. Frictional connections of all types including shrink fits and press fits must be designed in such a way that the
load peaks can be dependably transmitted. However, the load peaks
vary so greatly from case to case that we are unable to give any recommendations as regards specific safety factors.
locking device connections are insensitive to impact loads (see Fig. 95).
Slipping clutch
Locking devices are not suitable for use as a slipping clutch without
consulting us.
Tangential stresses
Tensile stress in the hub bore or compression stress in the bore of hollow shafts as a result of the
Contact pressures between outer locking ring and hub and/or inner locking ring and hollow shaft.
Fig. 97
Tangential stresses in shrink fits.
Temperature, influence of
Shrink fits and thus locking device connections, too give perfect
service as long as the contact pressure in the joint does not drop below
a certain minimum value. Consequently, contact pressure in the joint at
operating temperature must be the subject of close attention. Please
contact us for advice.
Fig. 95
Shape factor k
Torque wrench
True running
The relatively narrow Locking AssembliesTM RINGFEDER RfN 7012
serve mainly to transmit high torques and axial forces. They are not selfcentering. True running of the hub/boss is thus governed by the
Centering action and the care taken during
Fitting.
Fig. 98
Pre-centering by selection of correct fit between
shaft and hub.
Fig. 96
Influence of the groove shape on shape factor k and
thus on the
Polar moment of resistance; extract
from the work of Prof. Thum.
For smooth shafts
42
k
= 1.
Catalog W-300-2
10
2.
External devices fit over a hub projection and clamp the component
externally. Shrink Discs in general, provide a more accurate concentricity (T.I.R. control) than internal devices. Detailed descriptions
can be found in the appropriate catalog sections.
2. PLATE SPROCKETS
For plate sprockets make sure the plate is thick enough for the critical contact area of the locking device to be completely recessed in
the sprocket; USE 7013.
B. MOUNTING GEARS
Gears include spur, miter, bevel, spiral, and helical gears as well as cams,
sheaves and other similarly constructed items.
1. NARROW GEARS
For gears where the LTB (length through bore) is less than 2 x Locking
AssemblyTM width, 7013s offer better concentricity.
2. WIDE GEARS
For wide gears where the LTB is greater than 2 x Locking
AssemblyTM width, any internal device appropriately sized will work.
3. LARGE GEARS
For large diameter gears (bull gears) with cast iron hubs use Shrink
DiscsTM; with steel construction, Shrink Discs are preferred, but all
devices are possible.
C. MOUNTING COUPLINGS
Couplings include many categories of flexible and rigid types. The most
common are addressed here.
1. Flexible disk-type couplings Shrink Disc is preferred.
2. Flexible gear or grid-type couplings all internal devices can be used
as well as the Shrink Discs if hub construction allows.
3. Flexible jaw-type couplings use Shrink Discs if hubs are cast iron;
all internal devices for steel hubs.
4. Rigid couplings sleeve or flange type Shrink DiscsTM are preferred
but all internal devices will work on steel hubs.
A. MOUNTING SPROCKETS
Sprockets generally use the internal devices. Sprockets include: roller
chain, conveyor chain, HTD, Polychain, etc. Check for an adequate hub
diameter for the required device. If the product is steel, assume a hub
material yield point of 36,000 psi minimum unless you know more
precisely what the material is.
Catalog W-300-2
43
ARCUSAFLEX Flywheel
Couplings
In accordance with our established policy to constantly improve our products, the specifications contained herein are subject to change without notice.
Since our Engineers cannot be aware of all applications and cannot control all the factors that may affect the function of our products, our warranty applies to
our products only.
TECHNICAL ASSISTANCE
Call us Toll Free at 1800638-1830
Please let us know what your specific requirements are and
we shall be very happy to work out detailed recommendations without any obligation. Just send a sketch with your
requirements and specifications.
W300-2
11/01 GP
Printed in U.S.A.