Professional Documents
Culture Documents
Standard Dryer PDF
Standard Dryer PDF
High efficiency heat exchanger Ozone friendly refrigerants Conforms to stringent ISO8573-1 standards
Standard Specifications
Model IDFA3E-23 IDFA4E-23 IDFA6E-23-K IDFA8E-23-K IDFA11E-23-K IDFA15E-23-K IDFA22E-23-K IDFA37E-23-K Inlet air pressure (bar) 1.5 to 10 Single Phase 2 to 40 (Relative humidity 230 VAC 50Hz of 85% or less) Operating range Inlet air temperature Ambient temperature (C) (C) Power supply voltage Power Air port consumption Refrigerant connections (W) 180 5 to 50 1.5 to 16 208 385 470 760 Rc 3/8 Rc1/2 HFC134a Rc 3/4 Rc 1 R1 R 1 1/2 Weight (kg) 18 22 23 27 28 46 54 62
HFC407C
Note ) Thread adapters to convert Rc thread to R thread are included with IDFA3E to IDFA15E.
Note 1) The standard condition (ANR) is under the conditions of 20C at atmospheric preessure and relative humidity of 65%. Note 2) The performance data for pressure dew point is in accordance with the following operating conditions from ISO 7183: Inlet air pressure: 7 bar Inlet air temperature: 35C (saturated) Cooling air temperature: 25C
Correction Factors
Inlet air temperature (C) 5 to 25 30 35 40 45 50 Correction factor A 1.30 1.25 1.00 0.83 0.70 0.60 Ambient temperature (C) Correction factor B Inlet air pressure (bar) Correction factor C 20 IDFA3E to 11E 1.10 IDFA15E to 37E 1.10 IDFA3E to 11E 25 30 35 40 1.00 0.91 0.83 0.79 1.00 0.97 0.89 0.77
4 5 6 7 3 8 9 10 11 12 13 14 15 16 0.80 0.87 0.92 0.96 1.00 1.04 1.07 1.10 1.13 1.16 1.18 1.21 1.23 1.25 IDFA15E to 37E 0.72 0.81 0.88 0.95 1.00 1.06 1.11 1.16 1.19 1.21 1.23 1.25 1.26 1.27
Corrected air flow rate = Customer's air flow rate/Factor A x Factor B x Factor C. Select a model with a nominal air flow rate higher than the corrected air flow rate calculated in the formula above.
Dimensions (mm)
Model IDFA3E-23 IDFA4E-23 IDFA6E-23-K IDFA8E-23-K IDFA11E-23-K IDFA15E-23-K IDFA22E-23-K IDFA37E-23-K A 226 270 300 290 B 410 453 455 485 603 775 855 C 473 498 568 578 623
Built to international standards, and backed by SMC's BS EN ISO 9001 quality certification, the IDFA Series has eight standard models with nominal capacities from 12 m3/h to 382 m3/h.
Operation Principle
Saturated compressed air enters the air-to-air heat exchanger, the incoming air is then precooled by the cold air exiting the dryer. The air then passes through the evaporator, where it is further cooled, to a 3C dew point. As the air cools, the water condenses from a vapour to a liquid which is removed by the automatic drain. The dry air is then passed back through the air-to-air heat exchanger where it is reheated before leaving the dryer.
Heat exchanger
Evaporation thermometer
Drain outlet
Additional Products
Series AFF Main Line Filter
General purpose 3 micron filter. Die-cast aluminium body with chromate treatment. Cartridge type element with no screw threads or tie rods, therefore removal and replacement of element is quick and easy. Option for differential pressure indicator. Option for internal auto-drain. Built-in push-to-connect fitting on drain.
SMC CORPORATION (Europe) Austria Belgium Bulgaria Croatia Czech Republic Denmark Estonia Finland France Germany Greece Hungary Ireland Italy Latvia Lithuania Netherlands Norway Poland Portugal Romania Russia Slovakia Slovenia Spain Sweden Switzerland Turkey UK +43 226262280 +32 (0)33551464 +359 2 9744492 +385 1 377 66 74 +42 0541424611 +45 70252900 +372 (0)6593540 +358 207 513513 +33 (0)164761000 +49 (0)61034020 +30-210-2717265 +36 13711343 +353 (0)14039000 +39 (0)292711 +371 (0)7779474 +370 5 264 81 26 +31 (0)205318888 +47 67129020 +48 225485085 +351 226108922 +40 213205111 +812 1185445 +421 244456725 +386 73885249 +34 945184100 +46 (0)86031200 +41 (0)523963131 +90 (0)2122211512 +44 (0)8001382930 www.smc.at www.smcpneumatics.be www.smc.bg www.smc.hr www.smc.cz www.smc-pneumatik.com www.smcpneumatics.ee www.smc.fi www.smc-france.fr www.smc-pneumatik.de www.smchellas.gr www.smc.hu www.smcpneumatics.ie www.smcitalia.it www.smclv.lv www.smcpneumatics.nl www.smc-norge.no www.smc.pl www.smces.es www.smcromania.ro www.smc-pneumatik.ru www.smc.sk www.smc.si www.smces.es www.smc.nu www.smc.ch www.entek.com.tr www.smcpneumatics.co.uk office@smc.at post@smcpneumatics.be office@smc.bg office@smc.hr office@smc.cz smc@smc-pneumatik.dk smc@smcpneumatics.ee smcfi@smc.fi contact@smc-france.fr info@smc-pneumatik.de sales@smchellas.gr office@smc.hu sales@smcpneumatics.ie mailbox@smcitalia.it info@smclv.lv info@smcpneumatics.nl post@smc-norge.no office@smc.pl postpt@smc.smces.es smcromania@smcromania.ro marketing@smc-pneumatik.ru office@smc.sk office@smc.si post@smc.smces.es post@smcpneumatics.se info@smc.ch smc-entek@entek.com.tr sales@smcpneumatics.co.uk +34 945184100 +81 0335022740 www.smceu.com www.smcworld.com
Die Daten knnen ohne vorherige Ankndigung und ohne, dass dem Hersteller daraus Verpflichtungen entstehen, gendert werden.
Akihabara UDX 15F, 4-14-1, Sotokanda, Chiyoda-ku, Tokyo 101-0021, JAPAN Phone: 03-5207-8249 FAX: 03-5298-5362