Professional Documents
Culture Documents
04 Solenoid Valves Light Type Va1
04 Solenoid Valves Light Type Va1
04 Solenoid Valves Light Type Va1
SR332/SR532VA10
SR342/SR542VA32
SR552VA54
SR562VA64
VA 2
VA 3
The safety precautions stated below are to be followed to use the product safely and correctly and to safeguard both you and other persons and avoid property damage. The precautions are classied into three categories, DANGER, WARNING and CAUTION, to indicate the degree of hazard, damage and imminence. Strictly observe these important safety precautions in addition to the safety requirements specied in ISO 44141) and JIS B 83702) and other standards.
SR2/RB
Imminent hazardous situation. Unless the situation is avoided, loss of life or serious injury may occur. Potential hazardous situation. Unless the situation is avoided, loss of life or serious injury may occur. Potential hazardous situation. Unless the situation is avoided, slight or medium injury, or physical damages may occur.
1ISO 4414Pneumatic uid power Recommendations for the application of equipment to transmission control systems 2JlS B 8370General rules of pneumatic system
WARNING
The suitability of pneumatic equipment shall be judged by the person who designs the pneumatic system or determines the specications. The equipment shall be handled by persons with sucient knowledge and experience. Incorrect handling of compressed air can cause hazardous situations. Any machine or device using pneumatic equipment shall be assembled, operated and maintained by persons with sucient knowledge and experience. Never handle any machine or device or remove the equipment without ensuring the safety. 1) Before inspecting or servicing any machine or device, make sure that the object to be driven is provided with drop or runaway preventing means. 2) Before removing the equipment, make sure that the above safeguard has been provided, and discharge the compressed air in the system. 3) Before restarting any machine or device, make sure that jumping-out preventing measures have been taken. Use the product in an environment appropriate to the specications. If the product is used in any equipment which may considerably aect persons or properties, such as nuclear, railroad, aircraft, vehicle and medical equipment, equipment in contact with drink or food, entertainment equipment, emergency shuto devices, safeguards for press, brake circuits and safety equipment, particularly for a purpose requiring safety or in an outdoor area, contact us.
VA 4
Product Lineup
Selection Materials
VA 5
Port size and eective sectional areamm2 Series variations Rc1/8 Rc1/4 Rc3/8 Rc1/2 Rc3/4 Rc1 Normally closed Normally open Page
SR2/RB
SR332 to 32
Piping inner diameter 2.5 4.0 2.5 4.0 4.0 4.0 4.0 6.0 4.0 6.0 6.0 8.0 6.0 6.0 8.0 8.0 6.0 8.0 9.0 8.0 9.0 8.0 9.0 8.0 9.0 9.0 8.0 9.0 8.0 9.0
4.2
4.2
4.2 SR532 to 32
4.2
Return Detent
SR532 SR542
SR532 SR542
SR342 to 50
10.2
10.2
VA32 40
SR542
SR552 10.2 SR542 to 50 10.2 Return Detent VA32 SR542 50 9.0 9.0 Closed center Exhaust center Pressure center VA32 SR552 SR562 SR542 SR552
25 SR552 to 100
Return Detent
VA54
63
SR562 5 22 Closed center Exhaust center Pressure center VA54 80 SR562 40 Return Detent VA64 100 5 35 Closed center Exhaust center Pressure center VA64 125 SR562 SR552 SR562 SR552
SR562 to 125
Setting conditions Pneumatic pressure : 0.5 MPa Piping length : 1 m on each of ports A and B Driving direction : Vertically upward Applicable cylinders : 20 and 25 10Z-3 Series 32 to 125 10A-6 Series Cylinder stroke 150 mm load 0.5 MPa Load rate 100 theoretical cylinder thrust
Load Use the above table to nd the approximate cylinder speed. Note that the actual speed varies depending on the operating conditions. Ensure that the working speed does not exceed the working speed range specied for each series. Cylinder
VA 6
Handling Instructions
Handling Instructions
VA 7
(Check for scratches on the outer surface.) Slowly push the tube all the way in. After tting the tube, lightly pull the tube to ensure
suciently, and draw out the tube. (If the release sleeve is pushed insuciently, the sleeve may bite into the tube, and the tube cannot be drawn out smoothly.) When reusing the tube, cut 15 mm or more from the tube end to avoid reuse of the bitten zone.
CAUTION When attaching or detaching the socket, do not pull the lead wires. Doing so can cause connection failure or breaking of wires. If the pin is bent, slowly straighten the pin with a precision screwdriver, and t the socket. 2. Lead wire color The standard sockets have 300-mm lead wires. The standard lead wire colors are shown below. Solenoid voltage Voltage symbol 100 V AC 200 V AC 24 V DC 1 2 8 6 Lead wire color Yellow White Red Black Brown Black Red SAWhite SBBlack COM
Recommended Tubes
Outer dia. Material Model number mm Bore mm Working pressure range (MPa)
Remove the DIN socket from the valve, and separate the terminal cover and the terminal body using a screwdriver. Fit the cable gland , : AC/gland washer and cable gasket onto the cable (cabtyre cord), and insert DC/ AC/ to the cable to the terminal DC/ cover . AC/ to Remove about 15 mm of the cabtyre cord sheath, and remove about 5 mm of the lead wire coating. If the outer lead wire with respect to the lead wire leading out direction in the terminal cover is longer by about 8 mm than the inner lead wire, the terminal cover can be easily tted. Do not use crimp-style terminals for the lead wires. Insert the naked wire to the lead wire hole , and tighten the set screw .
1
2
Nylon
4 6 4 6
2 4 2.5 4
0 to 1
Urethane
0 to 0.5
12 V DC
Conductor sectional area No. of cores Finished cord outer dia. 0.75mm2 2 cores 6.6mm (equivalent to AWG18 to 20) 3 cores 7.0mm 2SR552SR562 Series
2 1
(Tandem solenoid)
Manifold
CAUTION 1. When 6 or more solenoid valves are simultaneously operated, supply and discharge of air from and to only one end of the manifold may not give the specied ow rate. Supply and discharge air from and to both ends of the manifold. 2. In the sub-plate type and mono-manifold type valves, there is a built-in check valve between the manifold and the solenoid discharge part of the valve to prevent backow of pilot exhaust. The check valve cannot operate normally if the pilot exhaust pressure in the sub-plate or manifold increases. Secure an exhaust line.
Optional valves with 1000 and 3000mm lead wires are available. The optional valves of 2-wire type have a red wire and a black wire . The 3-wire type valves (for tandem solenoid) have red, white and black wires like the standard valves.
1. Loosen the cover mounting screw , remove the DIN socket from the solenoid, and separate the terminal cover and the terminal body with a screwdriver. 2. Fit the cable gland , washer and cable gasket onto the Minus cable (cabtyre cord), Plus and insert the cable to the terminal cover . 3. Remove about 25 mm of the cabtyre cord sheath, remove about 5 mm of the lead wire coating, and t the crimp-style terminal . If the outer lead wire with respect to the lead wire leading out direction in the terminal cover is longer by about 8 mm than the inner lead wire, the terminal cover can be easily tted. 4. Remove the terminal screw from the terminal body , insert the terminal (in the case of a Y-shaped terminal, loosen the screw, and t the terminal on the screw), and tighten the terminal screw to 49 Ncm15%. Polarity The DC solenoid has polarity. The numbers 1 and 2 shown on the terminal screw areas of the terminal body indicate the plus and minus poles, respectively. 5. To assemble, t the terminal cover to the terminal body , and tighten the cable gland . Set the gasket on the solenoid side in advance, and tighten the cover mounting screw to 30 N cm15% to secure the DIN socket. Applicable cord (reference) JIS C3306 VCTF(vinyl cabtyre round cord) Sheath outer dia.: 6 to 8 mm Lead wire: AWG18 to 20
2 1
1
SR2/RB
Cover mounting screw Solenoid terminal array Screwdriver (blade width: 4 to 4.5 mm) Terminal body Terminal cover LED indicator (LED)
Polarity of solenoid
The solenoids provided with DC protective circuit and those provided with indicating lamp and protective circuit have polarity. If wires are connected to improper poles, short-circuiting will not occur, but the solenoid valve will not function.
CAUTION All DIN sockets are provided with lamps. Therefore, the terminal block has a Y-shaped terminal for lamp circuit. When wiring, take care that the Y-shaped terminal for lamp circuit is not disconnected. Do not connect naked wire with the accessory terminal screw . The cannot be tightened completely, and the
Y-shaped terminal will come o, thereby causing lamp lighting failure or short-circuiting.
VA 8
Handling Instructions
Handling Instructions
VA 9
Control device
SR2/RB
Manual override
1. Push the manual override all the way in, and operate it. The single solenoid is kept in the same state as the energized state while the manual override is held down. When the override is released, the solenoid will be restored. The double solenoid is switched to the same state as the energized state of S1 (S2) by pressing the manual override on the S1 (S2) side. The solenoid is kept in the state even if the manual override is released. To restore it, operate the manual override on the S2 (S1) side.
1. Leakage current When the solenoid valve is operated by a programmable controller or is provided with a CR circuit for contact protection, ensure that leakage current of output is less than 5% of holding current. Otherwise, the solenoid valve may not turn o even if power is turned o. 2. When the solenoid valve is switched, surge voltage is generated. The surge voltage caused when the valve turns o may damage the control device contact. In such a case, it is recommended to use a valve provided with a protective circuit. (The circuit protects the solenoid also from external surge.)
CAUTION The port plug is only temporarily secured on the manifold. Reposition it appropriately to the purpose of use. If it is used at the position at which it is temporarily secured, retighten it without fail. When assembling, carefully check for dust and scratches on the solenoid valve, manifold and gasket. (Particularly check carefully the mounting seal surfaces.)
Working pressure
Use the valve constantly within the working pressure range.
The valve will be delivered without the sub-plate mounted. When assembling the sub-plate/manifold and valve, take care not to scratch the mounting surfaces (seal surfaces), and tighten the mounting screws to the specied torque. Take utmost care not to mount the valve in a wrong direction with respect to the sub-plate/manifold.
CAUTION When ports A and B are open to the atmosphere or port P is closed, the pressure drops when the solenoid valve operates, and it may malfunction. Keep the pressure of port P within the working pressure range.
PU
SH
Power supply
Use the valve constantly within the working voltage range.
CAUTION Take care that the voltage is not dropped by the inuence of other electric appliances while the valve is operating.
2. On the tandem solenoid, when the manual override is pressed all the way in with a precision screwdriver and turned to A clockwise based on the 0 position, the solenoid on the SA side is set to the same state as the energized state and locked. On the SB side, turn the override counterclockwise to B. To unlock, return the override to 0. The manual override will return to the original position with the aid of the spring, and the solenoid will be unlocked. The manual override may be damaged if it is turned excessively.
Storage
CAUTION Do not stack the solenoid valves. If vibration is applied to them, they may collapse, thereby causing accidents. The parts may be damaged. Do not apply vibration or impact to the solenoid valves in stock. The parts may be damaged. Store the valves at a height of 30 cm or more from the floor in a cool and dark space (37 or less) away from direct sunlight and moisture. Do not apply vibration or impact to the solenoid valves in stock. The parts may be damaged.
Disposal
Dispose of the solenoid valves as incombustibles. Remove the pipes and joints from the manifolds, and dispose of them as aluminum materials.
VA 10
SR332/SR532
SR332/SR532
200 V AC 24 V DC (tandem solenoid) Built-in surge absorbing transistor 21.6 to 26.4 2410 501.2W 2
VA 11
SR332/SR532SR2/RB
Small-size lubrication-free solenoid valves with valve width of 15 mm and eective sectional area of 4.2 mm (2-position type)
Suitable for driving cylinders with bores of up to 32 mm As standard devices for protection from power surge, the valves for AC are provided with varistors, and those for DC are provided with ywheel diodes. The valves for AC power can be used at 100 to 120 V AC or 200 to 240 V AC available. The valves can be wired by various methods, e.g. Q socket, P socket, DIN socket and lead wire methods, and the Q socket, P socket and DIN socket type valves are provided with indicating lamps for easy conrmation as standard devices. One touch ttings for 4- and 6-mm dia. valves are standardized. Compact tandem type double solenoid valves are available (sub-plate type, Mono-manifold type/24 V DC).
Electrical Specications
Rated voltage Type Working voltage range 12 V DC 24 V DC 100 V AC
SR2/RB
Flywheel diode against surge 10.8 to 13.2 1210 1401.7W 8 21.6 to 26.4 2410 751.8W 4
SR332/SR532
Current value Frequency Hz (when rated Starting mA (r.m.s) voltage is applied) Exciting mA (r.m.s)
Allowable circuit leakage current value
mA
Insulation resistance M
Wiring method and lead wire length
Lead wire type: 300 mm, P/Q socket type: 300 mm (standard) Brown Black Red Flywheel diode For 12 V DC and 24 V DC
Short-circuit preventing diode Lead wire 12 V DC: Brown 24 V DC: Red Flywheel diode Lead wire: Black
P/Q socket type: 300 mm (standard) Red SABlack COM White SB Red Surge absorbing transistor
Red Black
White Green
Valve Specications
Model 3-port 2-position Item Model number Normally closed Normally open 2-position Return Detent 5-port 3-position
3-position 3-position 3-position closed center exhaust center pressure center
Direct type Easy-manifold SR332NNO SR332ONO SR532RNO SR532DNO SR532CNO SR532ENO SR532PNO Sub-plate type Mono-manifold SR332NMM SR332OMM SR532RMM SR532DMM SR532CMM SR532EMM SR532PMM
A 2 A 2 31 R P
B A
24
B A
24
B A 24 S1 315 S2 S1
B A 24 315 S2 S1
B A 24 315 S2
Solenoid Varistor Lead wire 100 V AC: Yellow 200 V AC: White
Solenoid
JIS symbol
31 R P 315 R2P R1
S1 R2P R1 S2
315
R2P R1
R2P R1
R2P R1
Electric circuit
Port size
Direct screw piping type: M50.8 With one touch ttings: 4 and 6 (tube outer dia.) Direct screw piping type: Rc1/8 4.2mm2 4.0mm2 Air Unnecessary 0.15 to 0.7 MPa 1.05 MPa 15/20 ms or less 15/15 ms or less 15/20 ms or less 15 ms or less 15/15 ms or less 15 ms or less 15/30 ms or less 15/20 ms or less 3.8mm2 3.6mm2
For 12 V DC and 24 V DC
24 V DC (tandem solenoid)
SOL.A S2 SA : Red COM: Black
LED indicator (LED) Lead wire 100 V AC: Yellow 200 V AC: White
Working fluid Lubrication Working pressure range Proof test pressure Note 1) 24 V DC, 12 V DC Response time In ON/OFF state 100 V AC, 200 V AC Working temperature range Manual override Installing direction Vibration resistance/impact resistance Recommended lubricant Note 2) Weight (g)
Direct type Easy-manifold Sub-plate type Mono-manifold
2 DIN Lead wire 12 V DC: Brown 24 V DC: Red 1 Lead wire: Black
Diode SOL.B
S1 SB : White
5 to 50 (ambient temperature and fluid temperature) Pushing Free 1373.0m/s2 (294.2 m/s in axial direction) 294.2m/s2
Note) The 1 and 3m lead wires (code: 1L and 3L, optional) of the P socket and Q socket type valves are in red and black.
JIS K2213 Class 1 (additive-free turbine oil ISO VG32) or its equivalent 75 80 180 80 85 180 125
130(225) Tandem type110(205)
Notes 1) Values at an air pressure of 0.5 MPa. The values were obtained at the opposite positions in the case of 2-position valves or in the valve neutral state in the case of 3-position valves. Notes 2) The parenthesized weight includes the weight of the sub-plate.
VA 12
SR332/SR532
Manifold Specications
Name Type Model number Max. number of stations Standard number of stations Exhaust type Port size Piping specification P R1 R2 R A B
SR332/SR532
VA 13
SR332/SR532SR2/RB
Direct screw piping type With one touch fittings Direct screw piping type With one touch fittings MF332MMF532M 20 stations 246810 Common exhaust type P: Rc1/8R: 1/4 Rc1/8 Side piping 46 P, R1, R2: Rc1/8 M50.8 (valve piping) 46 MF332EMF532E 20 stations 246810
Eective sectional area 4.2 mm MPa 0.7 Valve outlet pressure 0.6 0.5 0.4 0.3 0.2 0.1 0 Valve outlet pressure Supply pressure 0.7 MPa 0.6 0.5 0.4 0.3 0.2 0.1 MPa 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0
Eective sectional area 3.8 mm Supply pressure MPa 0.7 0.6 0.5 0.4 0.3 0.2 0.1
SR332/SR532
Valve Specications
Model 3-port 2-position 2-position type 5-port 3-position 3-position closed 3-position exhaust 3-position pressure center center center Direct type Easy-manifold SR332NNO SR332ONO SR532RNO SR532DNO SR532CNO SR532ENO SR532PNO Normally closed Normally open Return Detent
Direct type Easy-manifold Sub-plate type Mono-manifold
Item
Model number Sub-plate type Mono-manifold SR332NMM SR332OMM SR532RMM SR532DMM SR532CMM SR532EMM SR532PMM Weight g 75 80 180 80 85 180 125
130 225 Tandem type 110 205
How to read the chart When the ow rate is 210 /min (ANR) at a supply pressure of 0.5 MPa, the valve outlet pressure is 0.4 MPa.
Manifold Weight
Number of stations Name MF332MA Mono-manifold MF332MC MF332ME Easy-manifold MF332ES MF532MA Mono-manifold MF532MC MF532ME Easy-manifold MF532ES 135 151 145 60 180 194 188 70 225 257 245 90 300 328 316 110 315 363 345 120 420 462 444 150 405 469 445 150 540 596 572 190 2 4 6 8
VA 14
SR332/SR532
Model number of valve only Direct type (port size M5) Easy manifold
SR332/SR532
VA 15
SR332/SR532SR2/RB
MF332M 04 A SR332 N
Series No. of manifold stations Mounting plate No symbol: None F: With mounting plate Symbol No. of stations 02 04 06 08 2 stations 4 stations 6 stations 8 stations 10 stations Piping method Symbol A C E Piping method Side piping (direct screw piping type) Side piping (with one touch ttings: 4) Side piping (with one touch ttings: 6)
MF332E 04 S
Series No. of manifold stations Symbol No. of stations 02 04 06 08 10 2 stations 4 stations 6 stations 8 stations 10 stations
SR332/SR532
NO 1 RK 1L F
Series
10
SR332 N
Series
MM 1 RK 1L SP
SR332 N MM 1 QW 1L
Series For Mono-manifold Note) For details, see How to order valve only.
SR332 N NO 1 QW 1L
Series Port size NODirect screw piping typeM5 VAWith one touch ttings4 VBWith one touch ttings6 Note) For details, see How to order valve only.
Lead wire length No symbol: Standard (300 mm) 1L: 1000 mm (order made) 3L: 3000 mm (order made) Note) Only Q and P socket types. All lead wires are in red and black. Voltage (standard) Symbol 1 Voltage
32 AC100V 10
SZZ
MF332MSfor Mono-manifold MF332ESfor Easy-manifold How to order gasket and bolt set MF332MGBSfor Mono-manifold MF332EGBSfor Easy-manifold
Port size (standard) Symbol NO Port size Direct screw piping type M50.8 For sub-plate/ Mono-manifold
Wiring method Symbol Wiring method SZZ Note) Easy-manifold valves will not come with manifold mounting gaskets and bolts. When adding a valve to a manifold, place an order for a gasket and bolt set at the same time.
N MM
31 P R
RK
Port size (option) OD of tube with joint VA on secondary side 4 OD of tube with joint VB on secondary side 6 WA OD of tube with joints on both sides 4 OD of tube with joints on both sides 6
Normally open
A 2
DC24V10 (Lead wire color: red, black) Voltage (option) DC12V10 (Lead wire color: brown, black) Other voltages P socket type PW With indicating lamp/protective circuit Q socket type QW With indicating lamp/protective circuit
Easy-manifold
O
31 P R
PR 3R 1P 2A 3R 1P
WB
Note) Valves with one touch ttings do not have the two 3.2-mm dia. side mounting holes.
A 4-station Mono-manifold type is shown as follows. Manifold body Valve block 2 2 Qty. 1
A 4-station Easy-manifold type is shown as follows. Manifold body Valve block 2 2 Qty. 1 MF332E04S SR332NNO1RK SR332ONO1RK
VA 16
SR332/SR532
Model number of valve only Direct type (port size M5) Easy manifold
SR332/SR532
VA 17
SR332/SR532SR2/RB
SR332/SR532
SR532 R
Series
NO 1 RK 1L F
SR532 D DM 8 QW 1D SP
Series
Mounting plate No symbol: None F: With mounting plate Note) Only return type
Note) The valve will be delivered without the sub-plate mounted.
Tandem type
Sub-plate No symbol: None SP: With sub-plate Lead wire length No symbol: Standard (300 mm) 1D: 1000 mm (order made) 3D: 3000 mm (order made) Note) The lead wires are in red, white and black.
SR532 R
Series
MM 1 RK 1L SP
Switching method Sub-plate No symbol: None SP: With sub-plate Symbol Switching method Detent
B A
Voltage Symbol 8 Voltage DC24V10 (Lead wire color: SA: red, SB: white, COM: black)
24
Lead wire length No symbol: Standard (300 mm) 1L: 1000 mm (order made) 3L: 3000 mm (order made) Note) Only Q and P socket types. All lead wires are in red and black. Voltage (standard) Symbol 1 Voltage
32 AC100V 10 (Lead wire color: yellow) 32 AC200V 10
315 S1 R2P R1 S2 SA SB
Closed center C
S1 B A 24 315 S2
Wiring method Symbol Wiring method E Lead wire type With protective circuit P
R1 SA SB R2P
Exhaust center
B A 24 S1 315 S2
24
Direct screw piping type NO M50.8 For sub-plate/ MM Mono-manifold Port size (option) VA OD of tube with joint on secondary side 4 OD of tube with joint on secondary side 6 OD of tube with joints on both sides 4 OD of tube with joints on both sides 6
315 R2P R1
RK
R1 SA SB R2P
Pressure center
B A 24 S1 315 S2
(Lead wire color: white) DC24V10 (Lead wire color: red, black) Voltage (option) DC12V10 (Lead wire color: brown, black) Other voltages
Detent
B A
24
315 S1 R2P R1 S2
Closed center C
S1 B A 24
VB
R1 SA SB R2P
WA
315
R2P R1
B A 24
S2
Exhaust center E
S1
WB
315
R2P R1
B A 24
S2
Pressure center P
S1
Note) Valves with joints on both sides (WA and WB) come only in the return type. Valves with one touch ttings do not have the two 3.2-mm dia. side mounting holes.
315
R2P R1
S2
VA 18
SR332/SR532
How to order manifold
Model number of Mono-manifold
SR332/SR532
VA 19
SR332/SR532SR2/RB
MF532M 04 A
Series No. of manifold stations Symbol No. of stations 02 04 06 08 10 2 stations 4 stations 6 stations 8 stations 10 stations Piping method Symbol A C E Piping method Side piping (direct screw piping type) Side piping (with one touch ttings: 4) Side piping (with one touch ttings: 6)
MF532E 04 S
Series No. of manifold stations
SR532DNO1RK SR532RNO1RK
SR332/SR532
Symbol No. of stations 02 04 06 08 10 2 stations 4 stations 6 stations 8 stations 10 stations A 4-station Easy-manifold is shown as follows. Manifold body Valve block 1 1 2 Qty. 1 MF532E04S SR532CNO1RK SR532DNO1RK SR532RNO1RK
5R1 1P 3R2
Qty. 1
MF532M04A
SR532 R MM 1 QW 1L
Series For Mono-manifold
SR532 R NO 1 QW 1L
Series Port size NO Direct screw piping typeM5 VAWith one touch ttings4 VBWith one touch ttings6 Note) The above three port sizes are available.
PR1 3R 1P PR2 Side piping (with one touch ttings: 4)
Tandem solenoid
SR532 D DM 8 QW 1D
Series Tandem type Note) For details, seeHow to order valve only.
SR532RMM1RK
SZZ
SZZ Note) Easy-manifold valves will not come with manifold mounting gaskets and bolts. When adding a valve to a manifold, place an order for a gasket and bolt set at the same time.
SZZ
A 4-station Mono-manifold is shown as follows. Manifold body Valve block 1 1 2 Qty. 1 MF532M04C SR532CMM1RK SR532DMM1RK SR532RMM1RK
SZZ
Tube OD 4 6
Tube OD 4 6 8
Model number M401M M601M F801MS Model number SA2M5 Model number SA206G1/8
VA 20
SR332/SR532
Sectional Drawings
3-port
Unit: mm
SR332/SR532
VA 21
SR332/SR532SR2/RB
Direct type
SR332 NNOVoltageRK(normally closed) SR332 ONOVoltageRK(normally open)
Sub-plate type
SR332 NMMVoltageRKSP(normally closed) SR332 OMMVoltageRKSP(normally open)
38 26 10
SR2/RB
SR332/SR532
A2
1P 3R
A2
1P 3R
3Rc1/8 M50.8 10 20
15
Approx. 300
24
PR
Manual override Non-lock type 3M50.8 2-2.8 spot facing 5.4 depth 3 (Mounting holes) 14 11.5 18 0.5 PR 23.2 (Mounting holes) 74.7 A 23.2 (Mounting holes) 46.5 3 15 24 30 3 18 10 42 32.2 Manual override Non-lock type
12.5
20.5
15.5 25.5
PR 3R A2 1P
Valve
Flapper
Mounting base Mild steel(galvanized) Sub-base Plunger Column Main body Aluminum alloy (alumite) Electromagnetic stainless steel Aluminum alloy (alumite)
9 9
View A
300 24 50
4.5
4.5
25 10
20
5-port 2-position
Return Detent
S2
5-port 3-position
Closed center
S2
Exhaust center
S2
Pressure center
S2
A4 B2
5R1 1P 3R2
A4 B2
5R1 1P 3R2 S1
A4 B2
5R1 1P 3R2
A4 B2
5R1 1P 3R2
A4 B2
5R1 1P 3R2
SR532DNO
S1
S1
S1
S2
SR532CNO
S2
SR532ENO
S2
SR532PNO
S2
PR 5R1 1P 3R2
A4 B2
PR2
PR2
PR2
S1
S1
S1
S1
VA 22
SR332/SR532
Direct type
Unit: mm
Unit: mm
SR332/SR532
VA 23
Option
Sub-plate type
SR532RMMVoltageRKSP(return)
SR332/SR532SR2/RB
Mounting plateSZZSR532F
3-port valve mounting dimensions
79.7 (to valve upper surface) 5 1.6 24.5 (Mounting holes) 24 24
SR2/RB
SR532RNOVoltageRK(return)
15 Approx. 300 Manual override Non-lock type 80.7 18 12.5 3 5.5
SR332/SR532
24
PR 3
30 24 15 17.5 7.5
Approx. 300 3 24
5M50.8
10
14 14
30 46 27.5
14 14 40
40
View A
20
34
21
PR2
12.5 4.5
Note) The valve will be delivered without the mounting plate mounted.
11.5 3
SR532 DNOVoltageRK(detent)
15 Approx. 300 2-manual overrides Non-lock type 5M50.8 5
SR532 DMMVoltageRKSP(detent)
30 Approx. 300 3 24 50 25 20 17.5 S2
M50.8
24 17.5 7.5
3 2PR 5 10
24 15
10 16.5 1.8
S2 31 9 118.4
1.8
59.2
9 S1 3 5.5 3
11
1.8
118.4 62
25 20
55
PR2
34
21 28.2
30 27.5
46
Note: PR is on the port side . The valve with a one touch ttings does not have the two 3.2-mm dia. side mounting holes.
Note: PR is on the port side . The valve with a one touch ttings does not have the two 3.2-mm dia. side mounting holes. The valve with joints on both sides (ports ) comes only in the return type.
Wiring method
Q socket type P socket type DIN socket type
5.5
34 10 44.5 20.5
50 24 25 20 17.5 11
A 36
34.5 44.1 27
24 15
S2 61.2 33 9 130.4
41 9 69.2 S1 3 5.5 3
25 130.4 74 20
55
PR2
34
21
30 46 27.5
Dimensional Table
Model number SR332N0 SR532RN0 SR532RMM SP , SR532DMM SP SR532DN0 Symbol A 82.5 88.5 94.5 134 146 B 75.5 81.5 C 90.6 96.6 (lead wire length) Standard type300 Order made 1L10003L3000 1D10003D3000 (For tandem solenoid) Overall length to solenoid end face on opposite side Overall length to valve or sub-base end face Remarks
28.2 5
5.5
SR532 C, E, P N0 , SR532 C, E, P M SP
VA 24
SR332/SR532
Unit: mm
Unit: mm
SR332/SR532
VA 25
SR332/SR532SR2/RB
SR532DDMVoltageQWSP(detent)
SR2/RB
SR332/SR532
2-LED indicators Manual override 2-2.8 (Mounting holes) 5.4 deep spot facing depth 3
2-LED indicators Manual override 2-2.8 (Mounting holes) 5.4 deep spot facing depth 3
30 24 15 Approx. 300
DC24V
A B
DC24V
A B
PR1
56.5
13
25 20
55
PR2
30 46 13
102.2
PR1
PR2
30 46
SR532DDMVoltagePWSP(detent)
2-LED indicators Manual override 2-2.8 (Mounting holes) 5.4 deep spot facing depth 3
2-LED indicators Manual override 17.5 7.5 2-2.8 (Mounting holes) 5.4 deep spot facing depth 3
30 24 15
Approx.300
A B
11 3RC1/8
A C B
2RC1/8
A
DC24V
A B
11 3RC1/8
PR1
13
25 20
55
PR2
30 46 13
94 66
PR1
25 3.5 20
55
PR2
30 46
VA 26
SR332/SR532
Direct screw piping type
Unit: mm
Unit: mm
SR332/SR532
VA 27
Mono-manifold/MF332M (3-port)
Easy-manifold/MF332E (3-port)
Direct screw piping type
Approx. 300 53 24 3.5 28 22.5 16 8.5 8 8.5 21M50.8 (With 1 plug: temporarily tightened) 22Rc1/8 (With 2 plugs: temporarily tightened) PR
SR2/RB
SR332/SR532SR2/RB
L 3.5 16 16 8.5 Manual override Non-lock type 44.2 (Mounting holes) 74.7 39 16 15 P 16 16 15
Approx. 300 L 3.5 16 16 15 Manual override Non-lock type 24.2 (Mounting holes) 74.7
SR332/SR532
P 16 16 15
3.5 8.5
42
21 15 M50.8
30
14 7
23
8 19 16
20.5
2 41 48
4 73 80
6 105 112
8 137 144
10 169 176
stn.1 stn.2 1.8
stn.1 stn.2
P L
43
Note: PR is on the port side . Note) The above drawings show dimensions of the lead wire type valve. For the Q/P socket type and DIN socket type valves, see dimensions of each valve.
Note) The above drawings show dimensions of the lead wire type valve. For the Q/P socket type and DIN socket type valves, see dimensions of each valve.
2 41 48
4 73 80
6 105 112
8 137 144
10 169 176
P L
P 15
42
29 36.5 13.5
5.2 6.8 for 4 7.5 for 6 One touch tting SR332MMRK SR332MMRK Seal plate MF332MS
8 19 16
2 41 48
4 73 80
6 105 112
8 137 144
10 169 176
P L
stn.1 stn.2
Note) The above drawings show dimensions of the lead wire type valve. For the Q/P socket type and DIN socket type valves, see dimensions of each valve.
VA 28
SR332/SR532
Direct screw piping type
3.5 16 16 15 Manual override 8.5 Non-lock type L P
Unit: mm
Unit: mm
SR332/SR532
VA 29
Mono-manifold/MF532M (5-port)
Mono-manifold/MF532M (5-port)
Direct screw piping type
3.5 60 Approx. 300 44.2 (Mounting holes) 24 35 29.5 15 13 3.5 22M50.8 (With 2 plugs: temporarily tightened) 21Rc1/4 (With 1 plug: temporarily tightened) 21Rc1/8 (With 1 plug: temporarily tightened) 38 21.5 7.5 32.5 16 16 15 Manual override 8.5
A C B A
SR2/RB
SR332/SR532SR2/RB
16 16 15
L P 16 16 15
C B
88.8 3.5 Approx. 300 24.2 (Mounting holes) 52.8 35 29.5 15 13 22M50.8 (With 2 plugs: temporarily tightened) 21Rc1/4 (With 1 plug: temporarily tightened) 21Rc1/8 (With 1 plug: temporarily tightened) 38
SR332/SR532
DC24V
DC24V
A B
A B
B A B
59.2 31
PR2
42 24.5
PR2
42 24.5
7.5
19.5 7.5 5
2 41 48
4 73 80
6 105 112
8 137 144
10 169 176
19.5 7.5 5
2 41 48
4 73 80
6 105 112
8 137 144
10 169 176
P
3 stn.1 stn.2 stn.3 stn.4 stn.5
P
3 stn.1 stn.2 stn.3 stn.4 stn.5
Note) The above drawings show dimensions of the lead wire type valve. For the Q/P socket type and DIN socket type valves, see dimensions of each valve.
Note) For a wiring method other than that shown above, see dimensions of each valve.
L P 16 16 15
C B
88.8 3.5 Approx. 300 24.2 (Mounting holes) 52.8 35 29.5 15 13 22M50.8 (With 2 plugs: temporarily tightened) 21Rc1/4 (With 1 plug: temporarily tightened) 21Rc1/8 (With 1 plug: temporarily tightened) 38
S2 S2 59.2 31 50 53 21.5 32.5 41 69.2 S1 S1 6.8 for J4 7.5 for J6 33 61.2 PR1 PR2
DC24V
DC24V
A B
A B
B A B
59.2 31
42 24.5
PR1
42 24.5
7.5
20.5 6.5
2 41 48
4 73 80
6 105 112
8 137 144
10 169 176
20.5 6.5 5
2 41 48
4 73 80
6 105 112
8 137 144
10 169 176
P
5 3 stn.1 stn.2 stn.3 stn.4 stn.5
P
3 stn.1 stn.2 stn.3 stn.4 stn.5
Note) The above drawings show dimensions of the lead wire type valve. For the Q/P socket type and DIN socket type valves, see dimensions of each valve.
Note) For a wiring method other than that shown above, see dimensions of each valve.
VA 30
SR332/SR532
Direct screw piping type
3.5 Manual override 16 16 Non-lock type 8.5 15
Unit: mm
Easy-manifold/MF532E (5-port)
SR332/SR532SR2/RB
L P 16 16 15
3.5
S2 S2 59.2 31 5 21.5
23
20 32
SR532RNORK SR532RNORK
1.8
43
Note: PR is on the port side . Note) The above drawings show dimensions of the lead wire type valve. For the Q/P socket type and DIN socket type valves, see dimensions of each valve.
2 41 48
4 73 80
6 105 112
8 137 144
10 169 176
P L
VA 32
SR342/SR542
SR342/SR542
200 V AC 24 V DC (tandem solenoid) Built-in surge absorbing transistor 21.6 to 26.4 2410 50 1.2W 2
VA 33
SR342/SR542SR2/RB
Small-size lubrication-free solenoid valves having a valve width of 18 mm and eective sectional area of 10.2 mm (2-position type)
Suitable for driving cylinders with bores of up to 50 mm As standard devices for protection from power surge, the valves for AC are provided with varistors, and those for DC are provided with ywheel diodes. The valves for AC power supply are applicable to 100 V AC to 120 V AC or 200 V AC to 240 V AC. The valves can be wired by various methods, e.g. Q socket, P socket, DIN socket and lead wire methods, and the Q socket, P socket and DIN socket type valves are provided with indicating lamps for easy conrmation as standard devices. Valves with one touch ttings for 4- and 6-mm dia. tubes are standardized. Compact tandem valves of double solenoid type are available (sub-plate type/Mono-manifold type/24 V DC).
Electrical Specications
Rated voltage Type Working voltage V range Current value Frequency Hz (when rated Starting mA r.m.s voltage is applied) Exciting mA r.m.s
Allowable circuit leakage current value mA
12 V DC
24 V DC
100 V AC
SR2/RB
Flywheel diode against surge 10.8 to 13.2 1210 140 1.7W 8 21.6 to 26.4 2410 75 1.8W 4
SR342/SR542
Insulation resistance M
Wiring method and lead wire length
Lead wire type: 300 mm, P/Q socket type: 300 mm (standard) Brown : Black : Red Flywheel diode For 12 V DC and 24 V DC
Short-circuit preventing diode Lead wire 12 V DC: Brown 24 V DC: Red Flywheel diode Lead wire: Black
P/Q socket type: 300 mm (standard) Red SABlack COM White SB Red Surge absorbing transistor
Red : Black :
White Green
Valve Specications
Model 3-port 2-position Item Model number
Direct type Easy-manifold Sub-plate type Mono-manifold
SR342NN1 SR342ON1 SR542RN1 SR542DN1 SR542CN1 SR542EN1 SR542PN1 SR342NMM SR342OMM SR542RMM SR542DMM SR542CMM SR542EMM SR542PMM
A 2 A 2 31 R P
B A B A B A
Solenoid Varistor Lead wire 100 V AC: Yellow 200 V AC: White
Solenoid
2 4 315 R2P R1
2 4 315 S1 R2P R1 S2
S1
24
B A
24
B A
24
S2
JIS symbol
31 R P 315 R2P R1
S2 S1
Electric circuit
Port size
Direct screw piping type: Rc1/8 With one touch ttings: 4 and 6 (tube outer dia.) Direct screw piping type: Rc1/4 10.2 mm2 8.2 mm2 Air Unnecessary 0.15 to 0.7 MPa 1.05 MPa 15/20 ms or less 15/15 ms or less 15/20 ms or less 15 ms or less 15/15 ms or less 15 ms or less 15/35 ms or less 15/20 ms or less 9.0 mm2 8.2 mm2
For 12 V DC and 24 V DC
24 V DC (tandem solenoid)
SOL.A S2 SA Red COM Black
Direct
Sub-plate Sub-plate/tandem type
LED indicator (LED) Lead wire 100 V AC: Yellow 200 V AC: White Diode SOL.B S1 SB White
Working fluid Lubrication Working pressure range Proof test pressure Note 1) 24 V DC, 12 V DC Response time In ON/OFF state 100 V AC, 200 V AC Working temperature range Manual Override Installing direction Vibration resistance/impact resistance Recommended lubricant Note 2) Easy-manifold Weight g Sub-plate type
Direct type
2 DIN Lead wire 12 V DC: Brown 24 V DC: Red 1 Lead wire: Black
5 to 50 (ambient temperature and fluid temperature) Pushing Free 1373.0 m/s2 (294.2 m/s in axial direction) 294.2 m/s2
Note) The 1 and 3m lead wires (1L and 3L, optional) of the P socket and Q socket type valves are in red and black.
JIS K2213 Class 1 (additive-free turbine oil ISO VG32) or its equivalent 95 105 250 105 115 275 155
165 325 Tandem type 135 295
Mono-manifold
Note 1)Values at an air pressure of 0.5 MPa. The values were obtained at the opposite positions in the case of 2-position valves or in the valve neutral state in the case of 3-position valves. Note 2)The parenthesized weight includes the weight of the sub-plate.
VA 34
SR342/SR542
Manifold Specications
Name Type Model number Max. number of stations Standard number of stations Exhaust type Port size Piping specification P R1 R2 A B
SR342/SR542
VA 35
SR342/SR542SR2/RB
Direct screw piping type With one touch fittings Direct screw piping type With one touch fittings MF342MMF542M 20 stations 246810 Common exhaust type Rc1/4 Rc1/8 Side piping 46 Rc1/8(piping on valve side) 46 MF342EMF542E 20 stations 246810
Eective sectional area 10.2 mm MPa 0.7 Valve outlet pressure 0.6 0.5 0.4 0.3 0.2 0.1 0 0.3 0.2 0.1 Supply pressure MPa 0.7 0.6 0.5 0.4 MPa 0.7 Valve outlet pressure 0.6 0.5 0.4 0.3 0.2 0.1 0
Eective sectional area 9.0 mm Supply pressure MPa 0.6 0.5 0.4 0.3 0.2 0.1 0.7
SR342/SR542
Valve Weight
Model 3-port 2-position Item Model number Weight g
Direct type Easy-manifold Sub-plate type Mono-manifold Direct type Easy-manifold Sub-plate type Mono-manifold
3-position
3-position exhaust center 3-position pressure center
SR342NN1 SR342ON1 SR542RN1 SR542DN1 SR542CN1 SR542EN1 SR542PN1 SR342NMM SR342OMM SR542RMM SR542DMM SR542CMM SR542EMM SR532PMM 95 105 250 105 115 275 155
165 325 Tandem type 135 295
How to read the chart When the ow rate is 460 /min (ANR) at a supply pressure of 0.5 MPa, the valve outlet pressure is 0.4 MPa.
Manifold Weight
No. of stations Name MF342M A Mono-manifold MF342M C E MF342M Easy-manifold MF342E S A MF542M Mono-manifold MF542M C MF542M E Easy-manifold MF542E S 2 216 232 228 94 360 390 396 124 4 360 392 384 158 600 660 672 208 6 504 552 540 222 840 930 948 292 8 646 712 696 286 1080 1200 1224 376
VA 36
SR342/SR542
How to order (3-port)
Model number of valve only Direct type (port size Rc1/8) Easy-manifold
SR342/SR542
VA 37
SR342/SR542SR2/RB
MF342M 04 A SR342 N
Series No. of manifold stations Mounting plate No symbol: None F: With mounting plate Symbol No. of stations 02 04 06 2 stations 4 stations 6 stations 8 stations 10 stations Piping method Symbol A C E Piping method Side piping (direct screw piping type) Side piping (with one touch ttings: 4) Side piping (with one touch ttings: 6)
MF342E 04 S
Series No. of manifold stations Symbol No. of stations 02 04 06 08 10 2 stations 4 stations 6 stations 8 stations 10 stations
SR342/SR542
N1
1 RK 1L F
Series
08 10
SR342 N
Series
MM
RK 1L SP
SR342 N MM 1 QW 1L
Series For Mono-manifold Note) For details, see How to order valve only .
SR342 N
Series
N1 1 QW 1L
Lead wire length No symbol: Standard (300 mm) 1L: 1000 mm (order made) 3L: 3000 mm (order made) Note) Only Q and P socket types. All lead wires are in red and black. Voltage (standard) Symbol 1 Voltage 100 V (Lead wire color: yellow)
32 200 V AC 10 (Lead wire color: white) 32 AC 10
Port size N1Direct screw piping typeRc1/8 VAWith one touch ttings4 VBWith one touch ttings6 Note) For details, see How to order valve only .
Port size (standard) Symbol N1 Port size Direct screw piping type Rc1 /8
SZZ
Note) Easy-manifold valves will not come with manifold mounting gaskets and bolts. When adding a valve to a manifold, place an order for a gasket and bolt set at the same time.
N
31 P R
RK
MF342EGBS
Normally open
A 2
VA
OD of tube with joint on secondary side 4 OD of tube with joint on secondary side 6 OD of tube with joints on both sides 4 6
24 V DC 10 (Lead wire color: red, black) Voltage (option) 12 V DC 10 (Lead wire color: brown, black) Other voltages P socket type With indicating PW lamp/protective circuit Q socket type With indicating QW lamp/protective circuit
A2
O
31 P R
VB
WA
PR 3R 1P 2A
3R 1P
A 4-station Mono-manifold type is shown as follows. Manifold body Valve block 2 2 Qty. 1
A 4-station Easy-manifold type is shown as follows. Manifold body Valve block 2 2 Qty. 1 MF342E04S SR342NN11RK SR342ON11RK
MF342M04A DIN socket type With indicating DW lamp/protective circuit SR342NMM1RK SR342OMM1RK
VA 38
SR342/SR542
Model number of valve only Direct type (port size Rc1/8) Easy-manifold
SR342/SR542
VA 39
SR342/SR542SR2/RB
SR342/SR542
SR542 R
Series
N1 1 RK 1L F
SR542 D DM 8 QW 1D SP
Series
Mounting plate No symbol: None F: With mounting plate Note) Only return type
Note) The valve will be delivered without the sub-plate mounted.
Tandem type
Sub-plate No symbol: None SP: With sub-plate Lead wire length No symbol: Standard (300 mm) 1D: 1000 mm (order made) 3D: 3000 mm (order made) Note) The lead wires are in red, white and black.
SR542 R
Series
MM 1 RK 1L SP
Switching method Sub-plate No symbol: None SP: With sub-plate Symbol Switching method Detent
B A
Voltage Symbol 8 Voltage 24 V DC 10 (Lead wire color: SA: red, SB: white, COM: black)
Wiring method Symbol Wiring method Q socket type With indicating lamp/protective circuit
24
Lead wire length No symbol: Standard (300 mm) 1L: 1000 mm (order made) 3L: 3000 mm (order made) Note) Only Q and P socket types. All lead wires are in red and black. Voltage (standard) Symbol 1 Voltage
32 100 V AC 10 (Lead wire color: yellow)
315 S1 R2P R1 S2 SA SB
QW
Closed center C
S1 B A 24
P socket type
315
Wiring method Symbol Wiring method E Lead wire type With protective circuit P
R1 SA SB R2P
S2
PW
Exhaust center
B A 24 S1 315 S2
24
Direct screw piping type N1 Rc1/8 For sub-plate/ MM mono-manifold Port size (option) VA OD of tube with joint on secondary side 4 OD of tube with joint on secondary side 6 OD of tube with joints on both sides 4 OD of tube with joints on both sides 6
315 R2P R1
200 V (Lead wire color: white) 24 V DC 10 (Lead wire color: red, black) Voltage (option)
32 AC 10
RK
R1 SA SB R2P
Pressure center
B A 24 S1 315 S2
Detent
B A
24
315 S1 R2P R1 S2
Closed center C
S1 B A 24
VB
R1 SA SB R2P
WA
315
R2P R1
B A 24
S2
Exhaust center E
S1
WB
315
R2P R1
B A 24
S2
Pressure center P
S1
315
R2P R1
S2
VA 40
SR342/SR542
How to order manifold
Model number of Mono-manifold
SR342/SR542
VA 41
SR342/SR542SR2/RB
MF542M 04 A
Series No. of manifold stations Symbol No. of stations 02 04 06 08 10 2 stations 4 stations 6 stations 8 stations 10 stations Piping method Symbol A C E Piping method Side piping (direct screw piping type) Side piping (with one touch ttings: 4) Side piping (with one touch ttings: 6)
MF542E 04 S
Series No. of manifold stations
SR342/SR542
PR1 5R1 1P 3R2 PR2 Side piping (direct screw piping type)
Symbol No. of stations 02 04 06 08 10 2 stations 4 stations 6 stations 8 stations 10 stations A 4-station Easy-manifold is shown as follows. Manifold body Valve block 1 1 2 Qty. 1
5R1 1P 3R2
Qty. 1
MF542M04A
SR542 R MM 1 QW 1L
Series For Mono-manifold
SR542 R N1 1 QW 1L
Series Port size N1Direct screw piping typeRc1/8 VAWith one touch ttings4 VBWith one touch ttings6 Note) The above three port sizes are available. Note) For details, see How to order valve only .
Tandem solenoid
SR542 D DM 8 QW 1D
Series Tandem type Note) For details, see How to order valve only .
SZZ
SZZ Note) Easy-manifold valves will not come with manifold SZZ mounting gaskets and bolts. When adding a valve to a manifold, place an order for a gasket and bolt set at the same time.
SZZ
Tube OD 4 6 8
Model number M401M M601M F801MS Model number SA2M5 Model number SA206G1/8 Model number SA208G1/4
VA 42
SR342/SR542
Sectional Drawings
3-port
Unit: mm
SR342/SR542
VA 43
SR342/SR542SR2/RB
Direct type
SR342 NN1VoltageRK (Normally closed) SR342 ON1VoltageRK (Normally open)
Sub-plate type
SR342 NMMVoltageRK SP (Normally closed) SR342 OMMVoltageRK SP (Normally open)
48 32 12 3Rc1/4 M50.8
SR2/RB
SR342/SR542
A 2
P 1 3 R
A 2
1 P 3 R 18 Approx. 300
27 24
12 PR
25
PR
86.8 58.6
Material
86.8
A 32.6
26.4
14.4 20
19.4
PR
3.5
3 R A 2
3 R
<View A>
2.4
1 P
24 27
58 30
0.5
12
24
5-port 2-position
Return Detent
S2
5-port 3-position
Normally closed
S2
Exhaust center
S2
Pressure center
S2
4 A B 2
5 R 1 1 P R 2 3
4 A B 2
5 R 1 1 P 3 R 2 S1
A 4 B 2
5 R 1 1 P 3 R 2
A 4 2 B
5 R 1 1 P 3 R 2
4 A B 2
5 R 1 1 P 3 R 2
SR542 DN1
S1
S1
S1
S2
SR542 CN1
S2
SR542 EN1
S2
SR542 PN1
S2
PR 5 R 1 A 4 P 1 B 2 3 R 2
PR1
PR1
PR1 R 1 5 4 A P 1 2 B 3 R 2
PR1
5 R 1 A 4 1 P 2 B 3 R 2
5 R 1 A 4 P 1 B 2 3 R 2 PR2
A 4 2 B R 2 3 5 R 1 P 1
PR2
PR2
PR2
S1
S1
S1
VA 44
SR342/SR542
Direct type
Unit: mm
Unit: mm
SR342/SR542
VA 45
Option
Sub-plate type
SR542 RN1VoltageRKSP (return)
SR342/SR542SR2/RB
Mounting plateSZZSR542 F
3-port valve mounting dimensions
91.8 (to valve upper surface) 5 34 58 3.5 27 24 30 25 15 10 2M50.8 5Rc1/4 PR1
SR2/RB
27 24 PR A
SR342/SR542
3.5
27 18 15
Approx. 300
30 14.4
26.4
10
29.4 16.2 21
45.5 25.5 102.9 74.7 71
26
26
16.5 16.5 45
16.5 16.5 45
32 25.5
40 62 35.5 PR2
15.5 4.5
Note) The valve will be delivered without the mounting plate mounted.
9.5 5 5
0.5
0.5
Rc1/8
2Rc1/8
Approx. 300 2manual overrides Non-lock type 23.2 spot facing 6 depth 3 (Mounting holes) 8 15
15 8
27 24 2PR
3.5
27 18 15
Approx. 300
14 22.4
26.4
10 S2
13.2 13.2
0.5
67.4 S1
32 25.5
71
40 62 35.5 PR2
15.5
Wiring method
Q socket type P socket type DIN socket type
14.8
46 20.5
0.5 6.5
0.5 6.5
35.5 10
SR542 CN1VoltageRK (closed center) SR542 EN1VoltageRK (exhaust center) SR542 PN1VoltageRK (pressure center)
18 15 S2 300 2manual overrides Non-lock type 23.2 spot facing 6 depth 3 (Mounting holes) 8 15 15
SR542 CMMVoltageRKSP (closed center) SR542 EMMVoltageRKSP (exhaust center) SR542 PMMVoltageRKSP (pressure center)
34 58
13
55.5
A 36
30 25 15 10
27 24
10
3.5
27 18 15
3.5
27 24
B 29
C
LED indicator
34.5 44.1 27
LED indicator
2PR
S2
13.2 13.2
32 25.5
Dimensional Table
40 62 35.5
71
Symbol
A 94.6 104.6
Remarks Overall length to valve or sub-base end face Overall length to solenoid end face on opposite side
PR2
15.5
0.5 6.5 21
28.2
S1
SR542DN1 , SR542DMM SP
VA 46
SR342/SR542
Unit: mm
Unit: mm
SR342/SR542
VA 47
SR342/SR542SR2/RB
SR2/RB
SR342/SR542
73 42 37.5
Approx. 300
30 25 15 10 2M50.8 3RC1/4
A B
A B
114.9108.8 100.6
PR1
72.6
20
32
71
40 62
PR1
20
25.5 23.2 (Mounting holes) 6 deep spot facing depth 4 24.5 (Mounting holes)
PR2
32
71
40 62
6.1
23.2 (Mounting holes) 6 deep spot facing depth 4
25.5
24.5 (Mounting holes)
PR2
Approx. 300 34 27 18
83.8 52.8
30 25 15 10 2M50.8
SR542 CDMVoltagePW SP (closed center) SR542 EDMVoltagePW SP (exhaust center) SR542 PDMVoltagePW SP (pressure center)
34 27 18
Approx. 300
83.8 52.8
10
A C B
DC24V
30 25 15 10 2 M50.8
3R C1/4
A C B
DC24V
2R C1/4
A
A B
3RC1/4
106.7 100.6
PR1
2 R C1/4
A B
72.6
20
32
71
40 62
PR1
112.8 84.8
25.5
23.2 (Mounting holes) 6 deep spot facing depth 4
PR2
20
32
71
40 62
6.1
23.2 (Mounting holes) 6 deep spot facing depth 4
PR2
VA 48
SR342/SR542
Direct screw piping type
Unit: mm
Unit: mm
SR342/SR542
VA 49
Mono-manifold/MF342M(3-port)
Easy-manifold/MF342E(3-port)
Direct screw piping type
SR2/RB
53 5 19 19 18 10 24.2 (Mounting holes) 86.8 27
SR342/SR542SR2/RB
L 5 Manual override Non-lock type 10 19 18 19 P 19 19 18 10 44.2 (Mounting holes) 86.8 50 20 5 Approx. 300 27 24
58 28 24 17 10 21M50.8 (With 1 plug: temporarily tightened) 22Rc1/4 (With 2 plugs: temporarily tightened) PR 52
L 5 P 19 10 19 18
SR342/SR542
Approx. 300
24
25 11 5
32
34 15
46
26.4 2.4
38 19 Rc1/8
5 29 16 9
2.4
4.5
Rc1/8
8 21 19
2 47 57
4 85 95
6 123 133
8 161 171
10 199 209
stn.1 stn.2
26.4
stn.1 stn.2
P L
53
Note) The above drawings show dimensions of the lead wire type valve. For the Q/P socket type and DIN socket type valves, see dimensions of each valve.
Note) The above drawings show dimensions of the lead wire type valve. For the Q/P socket type and DIN socket type valves, see dimensions of each valve.
2 47 57
4 85 95
6 123 133
8 161 171
10 199 209
P L
34 15
46
SR342MMRK SR342MMRK
4.5
8 21 19
2 47 57
4 85 95
6 123 133
8 161 171
10 199 209
P L
stn.1 stn.2
Note) The above drawings show dimensions of the lead wire type valve. For the Q/P socket type and DIN socket type valves, see dimensions of each valve.
VA 50
SR342/SR542
Direct screw piping type
5 19 19 18 Manual override 10 15 Non-lock type L P
Unit: mm
Unit: mm
SR342/SR542
VA 51
Mono-manifold/MF542M(5-port)
Mono-manifold/MF542M(5-port)
Direct screw piping type
SR2/RB L P 19 19 18 93.8 52.8 40 34 16.5 22M50.8 (With 2 plugs: temporarily tightened) 23Rc1/4 (With 3 plugs: temporarily tightened) 70.2 42.5 20 29.4 27
6
SR342/SR542SR2/RB
68
5
40 34 16.5
Approx. 300
27 24
22M50.8 (With 2 plugs: temporarily tightened) 23Rc1/4 (With 3 plugs: temporarily tightened)
SR342/SR542
S2 S2 67.4 39.2 68 74 29.4 20 27 S1 S1 SR542RMMRK SR542RMMRK 2Rc1/8 (for 1 station) SR542DMMRK SR542CMMRK 52.2 80.4 42 70.2 PR1
C B
DC24V
A B
A B A
A B
B
67.4 39.2
37
PR1
40 17
62
40 62 37 17 6
PR2
25 8
2 47 57
4 85 95
6 123 133
8 161 171
10 199 209
2 47 57
4 85 95
6 123 133
8 161 171
10 199 209
25 8 6
P L
P L
Note) The above drawings show dimensions of the lead wire type valve. For the Q/P socket type and DIN socket type valves, see dimensions of each valve.
Note) The above drawings show dimensions of the lead wire type valve. For the Q/P socket type and DIN socket type valves, see dimensions of each valve.
L P 19 19 18
Approx. 300
C B
C B
DC24V
DC24V
S2 S2 67.4 70.2
A B
A B A
A B
B
67.4
39.2
62
39.2
68 74 29.4 20 27 S1 S1 SR542RMMRK SR542RMMRK 2one touch ttings (for 1 station)
42
40 62 37 17 6
52.2 80.4
PR2
37
40 17
29.4
SR542RMMRK SR542RMMRK
2one touch ttings (for 1 station)
2 47 57
4 85 95
6 123 133
8 161 171
10 199 209
25.5
2 47 57
4 85 95
6 123 133
8 161 171
10 199 209
25.5
7
P L
P L
Note) The above drawings show dimensions of the lead wire type valve. For the Q/P socket type and DIN socket type valves, see dimensions of each valve.
Note) The above drawings show dimensions of the lead wire type valve. For the Q/P socket type and DIN socket type valves, see dimensions of each valve.
VA 52
SR342/SR542
Direct screw piping type
5 19 19 10 18 15 L P
Unit: mm
Easy manifold/MF542E(5-port)
SR342/SR542SR2/RB
S2 S2 67.4 70.2
39.2
42 20 42 58
29.4
8 Rc1/8
19
29
22 40 18
52.2
S1 S1 0.5 0.5 SR542DN1RK SR542CN1RK Seal plate MF542ES
80.4
SR542RN1RK SR542RN1RK
0.5
0.5
53
Note) The above drawings show dimensions of the lead wire type valve. For the Q/P socket type and DIN socket type valves, see dimensions of each valve.
2 47 57
4 85 95
6 123 133
8 161 171
10 199 209
P L
VA 54
SR552
SR552
200 V AC Shading type
VA 55
Electrical Specications
SR552SR2/RB
Small-size lubrication-free solenoid valves having a valve width of 21 mm and eective sectional area of 25 mm (2-position type)
Suitable for driving cylinders with bores from 63 to 100 mm As standard devices for protection from power surge, the valves for AC are provided with varistors, and those for DC are provided with ywheel diodes. The valves for AC power supply are applicable to 100 V AC to 120 V AC or 200 V AC to 240 V AC. The valves can be wired by various methods, e.g. Q socket, P socket, DIN socket and lead wire methods, and the Q socket, P socket and DIN socket type valves are provided with lamps for easy conrmation as standard devices.
Item Type
Rating
12 V DC
24 V DC
100 V AC
SR2/RB
Flywheel diode against surge 10.8 to 13.2 1210 1401.7W 8 21.6 to 26.4 2410 751.8W 4 100 or more 90 to 132 32 100 10 50 55 24 4
SR552
Working voltage V range Current value Frequency Hz (when rated Starting mA r.m.s voltage is applied) Exciting mA r.m.s
Allowable circuit leakage current value mA
60 49 19
Insulation resistance M
Wiring method and lead wire length
Lead wire type: 300 mm, P/Q socket type: 300 mm (standard) Brown : Black : Red Flywheel diode For 12 V DC and 24 V DC Red : Black : Yellow Yellow Varistor For 100 V AC and 200 V AC White Green
Valve Specications
Model 2-position Item Model number JIS symbol A B Direct P type R1 R2 A B Sub-plate P type R1 R2 Effective sectional area Direct
Sub-plate Sub-plate/tandem type
3-position Detent
3-position closed center 3-position exhaust center 3-position pressure center
Return
Direct type Easy-manifold Sub-plate type Mono-manifold
SR552RN2 SR552RMM
BA R2PR1
SR552DN2 SR552DMM
BA S1 R2PR1 S2
SR552CN2 SR552CMM
BA S1 R2PR1 S2
SR552EN2 SR552EMM
BA S1 R2PR1 S2
SR552PN2 SR552PMM
BA S1 R2PR1 S2
Short-circuit preventing diode Lead wire 12 V DC: Brown 24 V DC: Red Flywheel diode Lead wire: Black
Solenoid Varistor Lead wire 100 V AC: Yellow 200 V AC: White
Solenoid
Direct screw piping type: Rc1/4 Electric circuit For 12 V DC and 24 V DC For 100 V AC and 200 V AC
Port size
22 mm2 20 mm2
LED indicator (LED) Lead wire 100 V AC: Yellow 200 V AC: White
Working fluid Lubrication Working pressure range Proof test pressure Note 1) 24 V DC, 12 V DC Response time In ON/OFF state 100 V AC, 200 V AC Working temperature range Manual override Installing direction Vibration resistance/impact resistance Recommended lubricant Note 2) Easy-manifold Weight g Sub-plate type
Direct type
1373.0 m/s2 1373.0 m/s2 (343.2 m/s2 in axial direction) (245.2 m/s2 in axial direction)
1 DIN Lead wire 12 V DC: Brown 24 V DC: Red 2 Lead wire: Black
Diode
5 to 50 (ambient temperature and fluid temperature) Pushing Free 1373.0 m/s2 (441.3 m/s2 in axial direction)
Note) The 1 and 3m lead wires (code; 1L and 3L, optional) of the P socket and Q socket type valves are in red and black.
JIS K2213 Class 1 (additive-free turbine oil ISO VG32) or its equivalent 230 460 240 330 330 550 380 610 390
Mono-manifold
Note 1) Values at an air pressure of 0.5 MPa. The values were obtained at the opposite positions in the case of 2-position valves or in the valve neutral state in the case of 3-position valves. Note 2) The parenthesized weight includes the weight of the sub-plate.
VA 56
SR552
Manifold Specications
Name Type Model number Max. number of stations Standard number of stations Exhaust type Port size Piping specification PR1R2 AB
SR552
VA 57
SR552SR2/RB
Eective sectional area 25 mm Supply MPa 0.7 0.7 pressure 0.6 0.6 MPa 0.5 0.5 0.4 0.3 0.2 0.1 0 0.4 0.3 0.2 0.1 500 1000 1500 2000 Flow rate /min ANR
Eective sectional area 22 mm MPa 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 Supply 0.7 pressure 0.6 MPa 0.5 0.4 0.3 0.2 0.1 500 1000 1500 2000 Flow rate /min ANR
SR552
Valve Weight
Model 2-position Item Model number Note) Weight g
Direct type Easy-manifold Sub-plate type Mono-manifold Direct type Easy-manifold Sub-plate type Mono-manifold
SR552CN2 SR552CMM
SR552PN2 SR552PMM
How to read the chart When the ow rate is 1050 /min (ANR) at a supply pressure of 0.5 MPa, the valve outlet pressure is 0.4 MPa.
Manifold Weight
No. of stations Name Mono-manifold Easy-manifold MF552M A MF552E S 1620 270 2680 440 3740 610 4800 780 2 4 6 8
VA 58
SR552
How to order
Model number of valve only Direct type (port size Rc1/4) Easy-manifold
SR552
VA 59
SR552SR2/RB
MF552M 04 A SR552 R
Series Mounting plate No symbol: None F: With mounting plate Note) Only return type
MF552E 04 S
Series No. of manifold stations Symbol No. of stations Symbol No. of stations Symbol No. of stations 02 2 stations 06 6 stations 10 10 stations 04 4 stations 08 8 stations
SR552
N2
1 RK 1L F
Series Side piping No. of manifold stations (direct screw piping type) Symbol No. of stations Symbol No. of stations Symbol No. of stations 02 2 stations 06 6 stations 10 10 stations 04 4 stations 08 8 stations
SR552 R
Series
MM 1 RK 1L SP
Sub-plate No symbol: None SP: With sub-plate Lead wire length No symbol: Standard (300 mm) 1L: 1000 mm (order made) 3L: 3000 mm (order made) Note) Only Q and P socket types. All lead wires are in red and black.
SR552 R MM 1 QW 1L
Series For Mono-manifold Note) For details, see How to order valve only .
SR552 R N2 1 QW 1L
Series For Easy-manifold Note) For details, see How to order valve only .
SZZ
MF552ES
(For Easy-manifold)
How to order gasket and bolt set MF552MGBS (For Mono-manifold) MF552EGBS (For Easy-manifold) How to order manifold
Mono-manifold
SR552CMM1QW SR552RMM1QW
Note) Easy-manifold valves will not come with manifold mounting gaskets and bolts. When adding a valve to a manifold, place an order for a gasket and bolt set at the same time.
Easy-manifold
SR552CN21QW SR552RN21QW
RK
Detent D
S1 BA R2PR1 S2
24 V DC 10 (Lead wire color: red, black) Voltage (option) Q socket type With indicating QW lamp/protective circuit
Closed center C
S1 BA R2PR1
R1 P R2
9
S2
Exhaust center E
S1 BA R2PR1 S2
DW
DIN socket type With indicating lamp/protective circuit Wiring method (option)
A 6-station Mono-manifold type is shown as follows. Qty. Manifold body 1 MF552M06A Valve block SR552RMM1QW 3 SR552CMM1QW 3
A 6-station Easy-manifold type is shown as follows. Qty. Manifold body 1 MF552E06S Valve block 3 SR552RN21QW 3 SR552CN21QW
Pressure center P
S1 BA R2PR1 S2
VA 60
SR552
Sectional Drawings
Return
Unit: mm
SR552
VA 61
SR552SR2/RB
Direct type
SR552 RN2VoltageRK (return)
2-3.2 spot facing Approx. 6 depth 3 21 300 Manual override (Mounting holes) Non-lock type 23.2 (Mounting holes) A 123 A 94.5 54 B 20 54 B 33 16 2 16 12 2M40.7 depth 15 Mouth 4.5 depth 11 2 5Rc1/4 16
Sub-plate type
SR552 RMMVoltageRK SP (return)
SR2/RB
SR552
A B
R1 P R2
A B
R1 P R2 S1
35 PR
10 4
38 30 21 4
Approx. 300
61 35 25 18 15 10 2 M50.8 5c1/4
PR1
R1 40 P 43 R2 23 27.5 A
A B 59 39 24.5 (Mounting holes)
Shading coil (only AC solenoid) Mold solenoid Plunger spring Manual override Pilot valve body Main body
R1 P
40 84
<View A> R1 P
49 29 PR2 R2 7
PR1
Seal
R1
Valve
Flapper Plunger
12
A P B R2
Column Sub-base
R2 6 1 1
35 2PR
Approx. 300
61 35 25 18 15 10 2M50.8 5c1/4
PR1
End cover
S1
Seal
S2 A B
Closed center
A B
S2
Exhaust center
A B
S2
Pressure center
A B
S2
160 80
27 27
A B
R1 P R2
S2
20 20
59 A B 39 S1 160 103 30 98 29 31
10 S1 2 2 8
27
R1 P R2
R1 P R2
R1 P R2
R1 P
40 84
PR2 R2 49 29
S1
S1
S1
SR552 CN2VoltageRK (closed center) SR552 EN2VoltageRK (exhaust center) SR552 PN2VoltageRK (pressure center)
SR552 CMMVoltageRK SP (closed center) SR552 EMMVoltageRK SP (exhaust center) SR552 PMMVoltageRK SP (pressure center)
38
PR1
PR1
PR1
21
Approx. 300
Approx. 300
4
35
4 10
30 21
61 35 25 18 15 10 2M50.8 5c1/4
PR1
S2
R1 A P B R2
B A P
R1
R1 A P B
190
95 66.5 27 27 66.5 95 S1 2 8 A B
2PR
S2
A B R1 P R2 20 20
A B 59 39 190 133 30 98 29 S1 46
R2
R2
R1 P
40 84
PR2
PR2
PR2
PR2 R2 49 29
28.5
2 8 27.5
S1
S1
S1
VA 62
SR552
Option
Unit: mm
Unit: mm
SR552
VA 63
Manifold
Mono-manifold
14 31 22 21 Manual override 20.5 Non-lock type S2 L P 22 31 21 20.5 S2 14 45.5 (Mounting holes) Approx. 300 35 93 57 46 22
SR552SR2/RB
Mounting plate (only return type) 128.6 (to valve upper surface) SZZSR552 F
5.6 1.6
SR2/RB
SR552
80 50.5 30 43 S1 S1 34.5
PR1
R1
P
30.5 77 26 22 12
PR2
R2
18 18 46
Note) The valve will be delivered without the mounting plate mounted.
Wiring method
Q socket type DIN socket type
45 10
16 Width across ats
21 18
Pg9
6 to 8 Cabtyre cable OD 79
B 34 10 28 3 A 9
2 56 84
4 100 128
6 144 172
8 188 216
10 232 260
10
36 A LED indicator
C
P L
40.6
Easy-manifold
Dimensional Table
Model number SR552RN2 SR552RMM SP SR552DN2, SR552DMM SP SR552 (C, E, P) N2, SR552 (C, E, P) MM SP Symbol A C (lead wire length) Standard type: 300 mm Order made: 1L: 1000 mm 3L: 3000 mm Overall length to solenoid end face on opposite side
80 51.5 10 43 10 80
66
Manual override Non-lock type
5 22 22 11.5 21
L P
Approx. 300
35
30 15 13
66.5
R1 P R2 95
66.5
2 56 66
4 100 110
6 144 154
8 188 198
10 232 242
P L
VA 64
SR562
SR562
200 V AC Shading type
VA 65
SR562SR2/RB
Small-size lubrication-free solenoid valves having a valve width of 27 mm and eective sectional area of 40 mm (2-position type)
Suitable for driving cylinders with bores from 80 to 125 mm As standard devices for protection from power surge, the valves for AC are provided with varistors, and those for DC are provided with ywheel diodes. The valves for AC power supply are applicable to 100 V AC to 120 V AC or 200 V AC to 240 V AC. The valves can be wired by various methods, e.g. Q socket, P socket, DIN socket and lead wire methods, and the Q socket, P socket and DIN socket type valves are provided with lamps for easy conrmation as standard devices.
Electrical Specications
Item Type Working voltage V range Current value Frequency Hz (when rated Starting mA r.m.s voltage is applied) Exciting mA r.m.s
Allowable circuit leakage current value mA
Rating
12 V DC
24 V DC
100 V AC
SR2/RB
Flywheel diode against surge 10.8 to 13.2 1210 1401.7W 8 21.6 to 26.4 2410 751.8W 4 100 or more 90 to 132 32 100 10 50 55 24 4
SR562
60 49 19
Insulation resistance M
Wiring method and lead wire length
Lead wire type: 300 mm, P/Q socket type: 300 mm (standard) Brown : Black : Red Flywheel diode For 12 V DC and 24 V DC
Short-circuit preventing diode
Red : Black :
White Green
Return
Direct type Easy-manifold Sub-plate type Mono-manifold
SR562RN3 SR562RMM
BA R2PR1
SR562CN3 SR562CMM
BA R2PR1 S2
SR562EN3 SR562EMM
BA S1 R2PR1 S2
SR562PN3 SR562PMM
BA S1 R2PR1 S2
Lead wire 12 V DC: Brown 24 V DC: Red Flywheel diode Lead wire: Black
Solenoid Varistor Lead wire 100 V AC: Yellow 200 V AC: White
Solenoid
Port size
Electric circuit
For 12 V DC and 24 V DC
35
mm2
LED indicator (LED) Lead wire 100 V AC: Yellow 200 V AC: White
1 DIN Lead wire 12 V DC: Brown 24 V DC: Red 2 Lead wire: Black
Diode
5 to 50 (ambient temperature and fluid temperature) Pushing Free 1373.0 m/s2 (490.3 m/s2 in axial direction)
Note) The 1 and 3m lead wires (code; 1L and 3L, optional) of the P socket and Q socket type valves are in red and black.
JIS K2213 Class 1 (additive-free turbine oil ISO VG32) or its equivalent
Mono-manifold
Note 1) Values at an air pressure of 0.5 MPa. The values were obtained at the opposite positions in the case of 2-position valves or in the valve neutral state in the case of 3-position valves. Note 2) The parenthesized weight includes the weight of the sub-plate.
VA 66
SR562
Manifold Specications
Name Type Model number Max. number of stations Standard number of stations Exhaust type Port size Piping specification PR1R2 AB
SR562
VA 67
SR562SR2/RB
SR562
MPa 0.7 Valve outlet pressure 0.6 0.5 0.4 0.3 0.2 0.1 0
Eective sectional area 40 mm Supply 0.7 pressure 0.6 MPa 0.5 0.4 0.3 0.2 0.1 1000 2000 30003500 Flow rate /min ANR
Eective sectional area 35 mm MPa 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0.5 0.4 0.3 0.2 0.1 1000 2000 30003500 Flow rate /min ANR 0.7 0.6 Supply pressure MPa
Valve Weight
Model 2-position Item Model number Note) Weight g
Direct type Easy-manifold Sub-plate type Mono-manifold Direct type Easy-manifold Sub-plate type Mono-manifold
SR562CN3 SR562CMM
SR562PN3 SR562PMM
How to read the chart When the ow rate is 1900 /min (ANR) at a supply pressure of 0.5 MPa, the valve outlet pressure is 0.4 MPa.
Manifold Weight
No. of stations Name Mono-manifold Easy-manifold A MF562M MF562E S 1685 430 2615 700 3545 970 4475 1240 2 4 6 8
VA 68
SR562
How to order
Model number of valve only Direct type (port size Rc3/8) Easy-manifold
SR562
VA 69
SR562SR2/RB
MF562M 04 A SR562 R
Series Mounting plate No symbol: None F: With mounting plate Note) Only return type
MF562E 04 S
Series No. of manifold stations Symbol No. of stations Symbol No. of stations Symbol No. of stations 02 2 stations 06 6 stations 10 10 stations 04 4 stations 08 8 stations
SR562
N3
1 RK 1L F
Series Side piping No. of manifold stations (direct screw piping type) Symbol No. of stations Symbol No. of stations Symbol No. of stations 02 2 stations 06 6 stations 10 10 stations 04 4 stations 08 8 stations
SR562 R
Series
MM 1 RK 1L SP
Sub-plate No symbol: None SP: With sub-plate Lead wire length No symbol: Standard (300 mm) 1L: 1000 mm (order made) 3L: 3000 mm (order made) Note) Only Q and P socket types. All lead wires are in red and black.
SR562 R MM 1 QW 1L
Series For Mono-manifold Note) For details, see How to order valve only .
SR562 R N3 1 QW 1L
Series For Easy-manifold Note) For details, see How to order valve only .
SZZ
MF562ES
(For Easy-manifold)
How to order gasket and bolt set MF562MGBS (For Mono-manifold) MF562EGBS (For Easy-manifold) How to order manifold
Mono-manifold
SR562CMM1QW SR562RMM1QW
Note) Easy-manifold valves will not come with manifold mounting gaskets and bolts. When adding a valve to a manifold, place an order for a gasket and bolt set at the same time.
Easy-manifold
SR562CN31QW SR562RN31QW
RK
Detent D
S1 BA R2PR1 S2
24 V DC 10 (Lead wire color: red, black) Voltage (option) Q socket type With indicating QW lamp/protective circuit
R1 P R2
Closed center C
S1 BA R2PR1
9
S2
Exhaust center E
S1 BA R2PR1 S2
DW
DIN socket type With indicating lamp/protective circuit Wiring method (option)
A 6-station Mono-manifold type is shown as follows. Qty. Manifold body 1 MF562M06A Valve block SR562RMM1QW 3 SR562CMM1QW 3
A 6-station Easy-manifold type is shown as follows. Qty. Manifold body 1 MF562E06S Valve block 3 SR562RN21QW 3 SR562CN21QW
Pressure center P
S1 BA R2PR1 S2
VA 70
SR562
Sectional Drawings
Return
SR562
VA 71
SR562SR2/RB
Direct type
SR562 RN3VoltageRK (return)
Sub-plate type
SR562 RMMVoltageRK SP (return)
SR2/RB
SR562
A B
R1 P R2
A B
R1 P R2 S1
27 21
Approx. Manual override 300 Non-lock type 2-4.4 spot facing 8 depth 4 (Mounting 44.4 (Mounting holes) holes) 60 25 A B
40 35 PR
46 5 36 27
A
74 5
Approx. 300
40 35
33 26 21 13 2M50.8 5Rc3/8
136.2 107.7 60
R1 50 49.7 R2 24.7 8 32 P
13
21
37.2
Shading coil (only AC solenoid) Mold solenoid Plunger spring Manual override Pilot valve body Main body PR
PR1 140.5
A
R1 112 108
38 28.5
PR1 R1
66.5
R1 P <View A> P2
41.5
R2
P PR2
50 94 54 29 7
Main shaft R1
B
A P
Valve
17
A P B R2 Lip seal
R2 PR2
Sub-base
Mounting base Mild steel (galvanized) Main body Manifold Block plate Aluminum alloy (alumite) Mild steel (nickel-plated) Synthetic rubber (NBR)
End cover
S1
Seal
Approx. 40 2Manual overrides 300 35 Non-lock type 2-4.4 spot facing 8 depth 4 44.4 (Mounting holes) (Mounting holes)
30 12.5 30 12.5 A B
Approx. 300
40 35
R1 P 25 25 R2
Closed center
A B
S2
Exhaust center
A B
S2
Pressure center
A B
S2
173 86.5
30 30
R1 P R2
R1 P R2
R1 P R2
S1 2 2
5Rc3/8 32
S1
S1
S1
10.5
10.5
SR562 CN3VoltageRK (closed center) SR562 EN3VoltageRK (exhaust center) SR562 PN3VoltageRK (pressure center)
SR562 CMMVoltageRK SP (closed center) SR562 EMMVoltageRK SP (exhaust center) SR562 PMMVoltageRK SP (pressure center)
46 74 5 5
2Manual overrides Non-lock type
27 21
PR1 R1 A P B R2 PR2 B R2 PR2 A P B R2 PR2 PR1 R1 A P PR1
Approx. 2Manual overrides 300 Non-lock type 2-4.4 spot facing 8 depth 4 (Mounting holes) 30 12.5
40 35 2PR
13
36 27 21 S2
Approx. 300
40 35
33 26 21 13
S2
R1
R1 P 25 25 R2
66.5 41.5 A B 209.8 152.8 38 108 28.5 S1 50.9
R2
P PR2
50 94 54 29 7 5Rc3/8 2M50.8
28.5
S1
S1
S1
VA 72
SR562
Option
Unit: mm
Unit: mm
SR562
VA 73
Manifold
Mono-manifold
B 2 SR2/RB
SR562SR2/RB
Mounting plate (only return type) 143.2 (to valve SZZSR562 F upper surface)
7
L P 28 35 27 S2 S2
109 68 57 28 22Rc1/8 (With 2 plugs: temporarily tightened) 23Rc1/2 (With 3 plugs: temporarily tightened) 104.9 76.4
SR562
86.5
58 32 106112
PR1
R1 P 66 88 54 R2 22 12
49.7
86.5
20 20 50
38 S1 S1
76.4 104.9
PR2
Note) The valve will be delivered without the mounting plate mounted.
Wiring method
Q socket type DIN socket type
SR562CMMRK SR562DMMRK SR562RMMRK stn.1 stn.2 stn.3 stn.4 Seal plate MF562MS Rc3/8
21 18
B 43 13 3 32 9 A Symbol
2
70 98
4
126 154
6
182 210
8
238 266
10
294 322
A 36 C LED indicator
40.6
P L
Easy-manifold
L P 28 28 27 S2
Dimensional Table
Model number SR562RN3 SP SR562RMM SR562DN3, SR562DMM SP Symbol A C
(lead wire length) Standard type: 300 mm Order made: 1L: 1000 mm 3L: 3000 mm Overall length to solenoid end face on opposite side
86.5 58 12.5 A S2
104.9
A 32 74 92
76.4
R1 P B 30 R2
76.4 104.9
30 64 46 31 14
49.7 86.5
12.5
B S1
S1 Rc3/8 2 2
SR562DN3RK SR562CN3RK SR562RN3RK stn.1 stn.2 stn.3 stn.4 Seal plate MF562ES
2
70 84
4
126 140
6
182 198
8
238 252
10
294 308
P L