Professional Documents
Culture Documents
Intelligent Selective Paging
Intelligent Selective Paging
1 (9)
2 (9)
Contents
Contents
Contents 3 1 2 3 Overview of Intelligent Selective Paging 5 Activating and testing Intelligent Selective Paging 7 Deactivating and testing Intelligent Selective Paging 9
3 (9)
4 (9)
5 (9)
Activating and testing Intelligent Selective Paging Deactivating and testing Intelligent Selective Paging
Descriptions . Functional Area Descriptions . Radio Network Performance . Basic call . Operability . Licensing in BSC
6 (9)
Tip
Activate the feature first in the BSCs and then in the MSC to avoid service disruption in the network.
To test the activation of Intelligent Selective Paging, make sure that the following network elements and mobile stations are available:
.
1 MSC with activated Intelligent Selective Paging 1 BSC with S12 ED 4.1 or newer software 4 BTSs on one LAC and two different bands, each having at least one TRX
Steps
1. 2. Check that the licence is installed and activated (W7M). Set the state of the Intelligent Selective Paging to ON. ZW7M:FWA=1301:ON;
7 (9)
3.
Test the feature. Use the GSM network message analyzer to check paging from Abis interfaces. a. Create adjacencies. BTS1, BTS2 and BTS3 are adjacent, while BTS4 has no adjacencies. b. Turn the MS on and connect it to BTS1. Remove the battery from the MS. c. Make MT CS call. CS call is unsuccessful. Paging is done at first with LAC + CI, BTS1, BTS2 and BTS3 are paged. Then the whole LAC, BTS1, BTS2. BTS3 and BTS4, is re-paged. d. Re-insert the battery and turn the MS on. Connect the MS to BTS4 and remove the battery from the MS. e. Make MT CS call. CS call is unsuccessful. Paging is done at first with LAC + CI, BTS4 is paged. Then the whole LAC, BTS1, BTS2. BTS3 and BTS4, is re-paged.
8 (9)
Tip
Deactivate the feature first in the MSC, then in the BSCs.
Steps
1. Set the state of the Intelligent Selective Paging to OFF. ZW7M:FWA=1301:OFF; 2. Test the deactivation. Use the GSM network message analyzer to check paging from Abis interfaces. a. Turn the MS on. Connect the MS to BTS1 and remove the battery from the MS. b. Make an MT CS call. The CS call is unsuccessful. Paging is done at first with LAC + CI, BTS1 is paged. Then the whole LAC, BTS1, BTS2, BTS3, and BTS4 are re-paged.
9 (9)