Professional Documents
Culture Documents
BSC6900 UMTS Parameter Reference (V900R011C00 - 06)
BSC6900 UMTS Parameter Reference (V900R011C00 - 06)
BSC6900 UMTS Parameter Reference (V900R011C00 - 06)
Huawei Technologies Co., Ltd. provides customers with comprehensive technical support and service. For any assistance, ple
http://www.huawei.com support@huawei.com
No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huaw
service. For any assistance, please contact our local office or company headquarters.
pective holders.
Purpose
This document provides information about the BSC6900 parameters, including the meaning, value, and usage of th
Intended Audience
Network planners Field engineers System engineers Shift operators
Organization
Each parameter is described in the following aspects. Description Parameter ID Parameter Name NE MML Command Meaning Feature ID Feature Name Value Type GUI Value Range Actual Value Range Unit Default Value Recommended Value Impact Parameter Relationship Access Service Interrupted After Modification Interruption Scope Interruption Duration (min) Caution
bout the BSC6900 parameters, including the meaning, value, and usage of the parameters.
owing aspects. Remarks Simple string for identifying a parameter Full name of the parameter NEs on which the parameter is set Commands for setting the parameter, and optional/mandatory attribute of the parameter in each command Functions, functioning ways, and protocols of the parameter Relevant feature ID Features using the parameter Parameter value type Parameter value range displayed on the GUI Actual parameter value range corresponding to the GUI Value Range. For example, the GUI Value Range is 0, and the corresponding Actual Value Range is OFF. Parameter value unit Initial value provided by the system Values recommended in different scenarios Parameter impact scope, that is, objects specified when the parameter is set Relationship between this parameter and other parameters. For example, to use this parameter, you need to set related switches and parameters. Whether this parameter is read/write or read only Whether modifying the parameter value may interrupt the existing services Possible interruption scope in the case that modifying the parameter value may interrupt the existing services Possible interruption duration in the case that modifying the parameter value may interrupt the existing services Cautions to be taken during the modification
Requirements on how to validate the modification of the parameter. For example, you may need to reset the device to validate the modification. Impact of the radio parameter on the network performance Version in which this parameter is introduced Whether this parameter is a radio parameter, a transport parameter, or an equipment parameter
Parameter ID
Parameter Name
NE
MML Command
Meaning
Feature ID
BSC6900
AAL2PATHT
BSC6900
This parameter defines the times of retransmissio n of paging messages. If the times of retransmissio n exceeds the value of this parameter, retransmissio n stops. For details, refer SET to the 3GPP UDPUCFGDATA(O TS 25.331 ptional) protocol. Service type of carried over the PATH. For R99, only the R99 service can be carried. For HSPA, only the HSPA service can be carried. For SHARE, R99 and HSPA services can ADD be carried at AAL2PATH(Mandat the same ory) time.
WRFD010301 WRFD010302
WRFD05030104
AbsTime
Specify Time
BSC6900
This parameter specifies the time to execute rehost policy for the primary hosted NodeB, after the RNC SET recovers from UPOOLPRIMHOST disaster and POLICY(Mandatory starts to WRFD) operate. 040202 It defines the mapping of AC 0~9 to ASCs. For detailed information of this ADD parameter, UPRACHACTOAS refer to 3GPP WRFDCMAP(Optional) TS 22.011. 021103 It defines the mapping of AC 10 to ASCs. For detailed information of this ADD parameter, UPRACHACTOAS refer to 3GPP WRFDCMAP(Optional) TS 22.011. 021103 It defines the mapping of AC 11 to ASCs. For detailed information of this ADD parameter, UPRACHACTOAS refer to 3GPP WRFDCMAP(Optional) TS 22.011. 021103
Ac09ToAsc
BSC6900
Ac10ToAsc
AC 10 to ASC mapping
BSC6900
Ac11ToAsc
AC 11 to ASC mapping
BSC6900
Ac12ToAsc
AC 12 to ASC mapping
BSC6900
It defines the mapping of AC 12 to ASCs. For detailed information of this ADD parameter, UPRACHACTOAS refer to 3GPP WRFDCMAP(Optional) TS 22.011. 021103 It defines the mapping of AC 13 to ASCs. For detailed information of this ADD parameter, UPRACHACTOAS refer to 3GPP WRFDCMAP(Optional) TS 22.011. 021103 It defines the mapping of AC 14 to ASCs. For detailed information of this ADD parameter, UPRACHACTOAS refer to 3GPP WRFDCMAP(Optional) TS 22.011. 021103 It defines the mapping of AC 15 to ASCs. For detailed information of this ADD parameter, UPRACHACTOAS refer to 3GPP WRFDCMAP(Optional) TS 22.011. 021103 ADD UPRACHASC(Man Identifying an WRFDdatory) ASC. 010401
Ac13ToAsc
AC 13 to ASC mapping
BSC6900
Ac14ToAsc
AC 14 to ASC mapping
BSC6900
Ac15ToAsc
AC 15 to ASC mapping
BSC6900
BSC6900
ACCTHD
AC control threshold
BSC6900
Access flow control threshold. When the average CPU usage of sliding windows exceeds the SET threshold, AC FCCPUTHD(Option flow control is WRFDal) triggered. 040100 Access packet queue usage threshold. When the average packet queue usage of sliding windows exceeds the SET threshold, AC FCMSGQTHD(Opti flow control is WRFDonal) triggered. 040100 Whether to compress the address and control fields. If this parameter is set to ENABLE, the address and control area compression is enabled. If this parameter is set to DISABLE, the address and control area compression is disabled.
ACCTHD
AC control threshold
BSC6900
ACFC
BSC6900
Interval of automatic access classes restriction between cells. When a subsystem of an RNC performs access classes restriction on cells managed by this subsystem, it selects the first cell at random. After waiting for the time specified in this parameter, the subsystem selects the second cell and the first cell is still with access classes SET restriction. UACALGO(Mandat The process WRFDory) lasts until all 021103 Specifies the interval between consecutive pollings imposed on the PS domain and CS domain in different cells according to the flexible polling restriction WRFDmode. 020114
BSC6900
AcRange
Specifies the access classes that are restricted according to ADD the flexible UCELLDSACMANU polling ALPARA(Mandatory restriction WRFD) mode. 020114 Specifies the restricted access class according to the flexible polling restriction WRFDmode. 020114
AcRange
BSC6900
Specifies the access classes that are restricted ADD according to UCELLDSACMANU the fixed ALPARA(Mandatory restriction WRFD) mode. 020114 Specifies the interval delay between consecutive pollings according to ADD the flexible UCELLDSACMANU polling ALPARA(Mandatory restriction WRFD) mode. 020114
BSC6900
BSC6900
Interval of access classes restriction. When a cell performs access classes restriction, it selects some access classes and after the restriction on these access classes lasts for the time specified in this parameter, the access classes restriction is released and the cell selects other SET access UACALGO(Mandat classes for WRFDory) restriction. 021103 Specifies the interval delay between consecutive pollings according to the flexible polling restriction WRFDmode. 020114
BSC6900
BSC6900
Access restriction ratio. When a cell performs access classes restriction, you can select some access classes from AC0 to AC9 based on the ratio specified in this parameter and perform access classes restriction on the selected access classes. After access classes restriction goes on for AcRstrctInter valLen, the original access classes SET restriction is UACALGO(Mandat released and WRFDory) other access 021103 OFF indicates that the AC algorithm is automatically disabled. ON indicates that the AC SET algorithm is UACALGO(Optional automatically WRFD) enabled. 021103
BSC6900
ACRTHD
AC restore threshold
BSC6900
Access flow control recovery threshold. When the average CPU usage of sliding windows is lower than the SET threshold, AC FCCPUTHD(Option flow control is WRFDal) stopped. 040100 Access packet recovery threshold. When the average packet queue usage of sliding windows is lower than the SET threshold, AC FCMSGQTHD(Opti flow control is onal) stopped. Whether to SET control AC FCSW(Optional) flow
ACRTHD
AC restore threshold
BSC6900
WRFD040100 WRFD040100
ACSW
AC control switch
BSC6900
AFSetObj
AFSetObj
BSC6900
The activity factor at the radio layer varies with the service priority. The configuration of the activity factor is performed based on the priorities of gold, silver, and copper. The activity SET factor of SRB UADMCTRL(Manda is priority WRFDtory) insensitive. 020101
BSC6900
ADD Flag of AUSMLCCELL(Optio GPS location WRFDnal) activation. 020803 This parameter indicates whether the GPS Additional Assistance Data Request is sent when the A-GPS method is WRFDused. 020803 UE positioning mode when the A-GPS method is selected. The UE supports both UEbased A-GPS mode and UEassisted AWRFDGPS mode. 020803
BSC6900
SET USMLC(Optional)
BSC6900
SET USMLC(Optional)
BSC6900
ADD GPS(Mandatory)
GPS receiver MRFDID 210502 GPS receiver type. An GPS receiver can be installed on the local RNC, a Node B controlled by the local RNC, or a neighboring MRFDRNC. 210502
BSC6900
ADD GPS(Mandatory)
BSC6900
Difference between the transmit power of AICH and that of PCPICH. For details, refer to the ADD 3GPP TS UCHPWROFFSET( 25.433 WRFDOptional) protocol. 020501 Transmission timing information of an AICH. "0" indicates that there are 7680 chips offset between the access preamble of the PRACH and AICH. "1" indicates that there are 12800 chips offset between them. For detailed information of this parameter, refer to 3GPP TS 25.211.
BSC6900
AID
Alarm ID
BSC6900
AID
Alarm ID
BSC6900
ADD UAICH(Optional) SET ALMPORT(Mandat ory) Alarm ID SET ALMBLKPARA(Man datory) Alarm ID
AID
Alarm ID
BSC6900
MRFD210304
AID
Alarm ID
BSC6900
Identifier of the alarm. This parameter ADD uniquely OBJALMSHLD(Opti identifies an onal) alarm. Identifier of the alarm. This parameter SET uniquely ENVALMPARA(Ma identifies an ndatory) alarm. ADD OBJALMSHLD(Opti Type of alarm onal) selection
MRFD210304
AID
Alarm ID
BSC6900
MRFD210304 MRFD210304
AIDST
BSC6900
AlignMode
align type
BSC6900
This parameter specifies whether the configured HS-SCCH Less Operation parameters adopt the octet_align or bit_align mode. Octet_align mode and bit_align mode indicates separately the two different mapping tables of Machs PDU. Please refer to the SET appendix A of UHSSCCHLESSOP 3GPP TS WRFDPARA(Mandatory) 25.321. 010687
AllBw
Bandwidth
BSC6900
Specifies the bandwidth occupied when the " transmission resource group type " is IP and the " bandwidth ADD mode " is RSCGRP(Mandator HALF_DUPL WRFDy) EX. 050406
If Manual is chosen, allocating [Code Number for HS-PDSCH] the equal of configured HS-PDSCH code number. If Automatic is chosen, allocating HSPDSCH code number between configured HS-PDSCH Maximum code number and HSPDSCH Minimum code number. For detailed information of this ADD parameter, UCELLHSDPA(Opti refer to 3GPP onal) TS 25.308.
WRFD01061001 WRFD01061005
ALMTP
Alarm Type
BSC6900
Type of the alarm. The EXP alarm can be ALMLOG(Optional) a fault alarm STA or an event MRFDALMLOG(Optional) alarm. 210304 Height of the specified GSP receiver MRFDantenna 210502 Height of the specified GSP receiver MRFDantenna 210502
ALTITUDE
BSC6900
ADD GPS(Mandatory)
BSC6900
ADD GPS(Mandatory)
ALVL
Alarm Severity
BSC6900
Alarm severity. One or more severities can be selected. By default, all EXP severities are MRFDALMLOG(Optional) selected. 210304 SET ALMLVL(Mandatory ) SET ALMSCRN(Mandat ory) SET ENVALMPARA(Opti onal) Alarm severity. One or more severities can be selected. By default, all severities are MRFDselected. 210304 Maximum number of times for event 2B retry. This parameter defines the number of times for event 2B retry when the measurement control is valid. The larger the value of this parameter, the larger the number of times for interfrequency handover retry, and the higher probability for the UE to be successfully handed over SET to the target UINTERFREQHOC cell whose OV(Optional) load is WRFDADD restored. 020302 UCELLINTERFRE After the WRFDQHOCOV(Optional) maximum 020304
ALVL
Alarm Severity
BSC6900
Maximum retry times of the event 2C. This parameter defines the number of times for event 2C retry when the measurement control is valid. The larger the value of this parameter, the larger the number of times for interfrequency handover retry, and the higher probability for the UE to be successfully handed over to the target SET cell whose UINTERFREQHON load is COV(Optional) restored. ADD When the UCELLINTERFRE retry times QHONCOV(Option reaches the WRFDal) maximum 021200
Maximum retry times of the event 3A. This parameter defines the number of times for event 3A retry when the measurement control is valid. The larger the value of this parameter, the larger the number of times for interRAT handover retry, and the higher probability the UE is successfully handed over to the target cell whose SET load is UINTERRATHOCO restored. V(Optional) When the ADD retry times UCELLINTERRATH reaches the WRFDOCOV(Optional) maximum 020303
Maximum retry times of the event 3C. This parameter defines the number of times for event 3C retry when the measurement control is valid. The larger the value of this parameter, the larger the number of times for interRAT handover retry, and the higher probability the UE is successfully handed over to the target cell whose SET load is UINTERRATHONC restored. OV(Optional) When the WRFDADD retry times 020305 UCELLINTERRATH reaches the WRFDONCOV(Optional) maximum 020306 This parameter specifies the parameter types for AM RLC. There are three types of AM RLC parameters: parameters of sender side, parameters of receiver side, ADD and UTYPRABRLC(Ma parameters of ndatory) flow control. None
BSC6900
BSC6900
When the parameter is set to YES, the QOS control algorithm is used for AMR services. When the parameter is set to NO, the QOS control algorithm is not used for AMR services.The QOS actions of AMR services include rate downsizing, inter frequency SET handover and UQOSACT(Optiona inter rat WRFDl) handover. 020701 Threshold of AMR call drop ratio per CPUS to report KPI alarm.In a checking period, if the ratio is higher than this threshold and the number of AMR call release is higher than the related threshold, the KPI alarm of SET AMR call drop UKPIALMTHD(Opti ratio is WRFDonal) reported. 010510
BSC6900
BSC6900
The minimum number of AMR RAB establish request per CPUS to report KPI alarm. In a checking period,if the number of AMR RAB establish request is higher than the threshold and the AMR RAB setup successful ratio is lower than this threshold,the KPI alarm of SET AMR RAB UKPIALMTHD(Opti setup ratio is WRFDonal) reported. 010510
Threshold of AMR RAB setup successful ratio per CPUS to report KPI alarm. In a checking period,if the ratio is lower than this threshold and the number of AMR RAB establish request is higher than the related threshold,the KPI alarm of SET AMR RAB UKPIALMTHD(Opti setup ratio is WRFDonal) reported. 010510
BSC6900
The minimum number of AMR call release per CPUS to report KPI alarm.In a checking period, if the number of AMR call release is higher than the related threshold and the AMR call drop ratio is higher than this threshold, the KPI alarm SET of AMR call UKPIALMTHD(Opti drop ratio is WRFDonal) reported. 010510
BSC6900
Timer for triggering a second adjustment of the UL AMR mode. This parameter specifies the duration of waiting for the voice quality enhanced acknowledge ment after the UL AMR mode adjustment when the associated command is delivered. The UL AMRC rate adjust timer starts when AMRC mode adjustment procedure is triggered, and stops when the next measurement SET report is UQOSACT(Optiona received. If WRFDl) no 020701 BLK AAL2PATH(Mandat ory) ADD ADJNODE(Mandat ory) ADD AAL2PATH(Mandat ory) ADD AAL2RT(Mandatory ) ADD IPPATH(Mandatory) ADD ADJMAP(Mandator y)
ANI
Adjacent Node ID
BSC6900
ANI
Adjacent node ID
BSC6900
LOP VCL(Mandatory) ADD IPMUX(Mandatory) ADD IPPATHBIND(Mand atory) SET VCLLOP(Optional) SET ENVALMPARA(Opti onal)
ANI ANI
BSC6900 BSC6900
Adjacent node identifier of this IP path None Adjacent node identifier None New name of MRFDthe alarm 210304
ANM
Alarm Name
BSC6900
BSC6900
Altitude of the cell antenna in the WGS84 coordinates. This is a necessary parameter, controlled by MTRLGY and valid when MET~0(metri c system).The value of this parameter ADD has effect on USMLCCELL(Optio the location WRFDnal) result. 020801 Altitude of the cell antenna in the WGS84 coordinates. This is controlled by MTRLGY and valid when IMP~1(British measurement ).The value of this parameter ADD has effect on USMLCCELL(Optio the location WRFDnal) result. 020801
BSC6900
Latitude of the cell antenna in the WGS-84 coordinates. The value correspondin g to the latitude A degrees B minutes C seconds is [A + (B/60) + (C/3600)] / 0.000001. For example, the value correspondin g to the latitude 31 degrees 30 minutes 36 seconds is [31 + (30/60) + (36/3600)] / 0.000001 = 31510000. This is controlled by GCDF and valid when DEG~0(degre ADD e format).The USMLCCELL(Optio value of this WRFDnal) parameter 020801
BSC6900
This parameter specifies the latitude of the cell antenna in the WGS84 coordinates. The input format is ddd:mm:ss.ss ss. This is controlled by GCDF and valid when SEC~1(degre e, minute, second format).The value of this parameter ADD has effect on USMLCCELL(Optio the location WRFDnal) result. 020801
Longitude of the cell antenna in the WGS-84 coordinates. The value correspondin g to the longitude A degrees B minutes C seconds is [A + (B/60) + (C/3600)] / 0.000001. For example, the value correspondin g to the longitude 121 degrees 40 minutes 36 seconds is [121 + (40/60) + (36/3600)] / 0.000001 = 121676666. This is controlled by GCDF and valid when DEG~0(degre ADD e format).The USMLCCELL(Optio value of this WRFDnal) parameter 020801
BSC6900
Longitude of the cell antenna in the WGS-84 coordinates.T he input format is ddd:mm:ss.ss ss. This is controlled by GCDF and valid when SEC~1(degre e, minute, second format).The value of this parameter ADD has effect on USMLCCELL(Optio the location WRFDnal) result. 020801 Coverage angle of a sector. For an omnidirectional cell, the value is 360.The value of this parameter ADD has effect on USMLCCELL(Mand the location WRFDatory) result. 020801 Azimuth of the main lobe of the cell antenna (the clockwise angle from the north to the direction of the main lobe).The value of this parameter may affect ADD the UE's final USMLCCELL(Mand location WRFDatory) result. 020801
BSC6900
ADD MPGRP(Optional)
None
APFlag
APFlag
BSC6900
APP
Application type
BSC6900
Meaning: Access point (AP) cell indicator. When the indicator is "TRUE", it indicates that the cell is an AP cell. AP is a device for accessing the UMTS wireless network. This device integrates the functions of the NodeB software and parts of the functions of the RNC software. It is applied to ADD households UEXT3GCELL(Opti and SOHO onal) users. Upper layer application type of the SCTP link. The upper layer application type of the Iub interface is NBAP. The upper layer application type of the Iur, IuPS, and ADD IuCS SCTPLNK(Mandato interface is ry) M3UA.
WRFD020605
WRFD050409
BSC6900
This parameter specifies the direction where the current typical ADD RAB UTYPRABBASIC(M parameters WRFDandatory) are applied. 010510 CMP BRDAREA(Optional ) LOD PATCH(Optional) Area flag LOD BRD(Optional) SYN BRDAREA(Optional ) Area flag User_priority correspondin g to SET Allocation/Ret UUSERPRIORITY( ention priority Optional) 10. User_priority correspondin g to SET Allocation/Ret UUSERPRIORITY( ention priority Optional) 11. User_priority correspondin g to SET Allocation/Ret UUSERPRIORITY( ention priority Optional) 12. User_priority correspondin g to SET Allocation/Ret UUSERPRIORITY( ention priority Optional) 13. User_priority correspondin g to SET Allocation/Ret UUSERPRIORITY( ention priority Optional) 14.
AREAFLAG
Area flag
BSC6900
MRFD210401
AREAFLAG
Area flag
BSC6900
MRFD210401 WRFD020106 WRFD020107 WRFD010505 WRFD020106 WRFD020107 WRFD010505 WRFD020106 WRFD020107 WRFD010505 WRFD020106 WRFD020107 WRFD010505 WRFD020106 WRFD020107 WRFD010505
ARP1Priority
User_priority correspondin g to SET Allocation/Ret UUSERPRIORITY( ention priority Optional) 1. User_priority correspondin g to SET Allocation/Ret UUSERPRIORITY( ention priority Optional) 2. User_priority correspondin g to SET Allocation/Ret UUSERPRIORITY( ention priority Optional) 3. User_priority correspondin g to SET Allocation/Ret UUSERPRIORITY( ention priority Optional) 4. User_priority correspondin g to SET Allocation/Ret UUSERPRIORITY( ention priority Optional) 5. User_priority correspondin g to SET Allocation/Ret UUSERPRIORITY( ention priority Optional) 6. User_priority correspondin g to SET Allocation/Ret UUSERPRIORITY( ention priority Optional) 7. User_priority correspondin g to SET Allocation/Ret UUSERPRIORITY( ention priority Optional) 8.
WRFD020106 WRFD020107 WRFD010505 WRFD020106 WRFD020107 WRFD010505 WRFD020106 WRFD020107 WRFD010505 WRFD020106 WRFD020107 WRFD010505 WRFD020106 WRFD020107 WRFD010505 WRFD020106 WRFD020107 WRFD010505 WRFD020106 WRFD020107 WRFD010505 WRFD020106 WRFD020107 WRFD010505
ARP2Priority
ARP3Priority
ARP4Priority
ARP5Priority
ARP6Priority
ARP7Priority
ARP8Priority
ARP9Priority
ARPRETRY
STR IPCHK(Optional)
Retransmissi on times upon ARP timeout. When the ARP request times exceeds the retransmissio n time without a response, the ARP/BFD detection failure alarm is reported. This may trigger the port or board WRFDswitchover. 050421
BSC6900
STR IPCHK(Optional)
ASS
Event Type
BSC6900
Network management type of the alarm. By default, all EXP network ALMLOG(Optional) management STA types are MRFDALMLOG(Optional) selected. 210304
ASS
Event Type
BSC6900
Network management type of the alarm. By default, all network SET management ENVALMPARA(Opti types are MRFDonal) selected. 210304 When the operation and maintenance channel of NodeB is operating in the ATM, this parameter indicates the slot number of the interface board of the ADD BSC6900 UNODEBIP(Mandat interworking WRFDory) with NodeB. 031101
ATMSN
BSC6900
ATMSRN
BSC6900
When the operation and maintenance channel of NodeB is operating in the ATM, this parameter indicates the subrack number of the interface board of the ADD BSC6900 UNODEBIP(Mandat interworking WRFDory) with NodeB. 031101
ATT
BSC6900
Indicating whether attach/detach is allowed. NOT_ALLOW ED indicates that MS(Mobile Station) cannot apply the IMSI attach/detach procedure. ALLOWED indicates that MS(Mobile Station) can apply the IMSI attach/detach procedure. It is valid only when [CN ADD domain ID] is UCNDOMAIN(Optio set as nal) CS_DOMAIN.
MRFD210601 WRFD010101 WRFD010501 WRFD010503 WRFD011401 WRFD011402 WRFD05030101 WRFD05030102 MRFD211401 MRFD211402 MRFD211403 MRFD211404 MRFD211502 MRFD070004
AUSTOP
Loop time[min]
BSC6900
AUSTOP
Test time[min]
BSC6900
It specifies SET the loopback E1T1LOP(Optional) duration. None It specifies STR the test E1T1TST(Optional) duration. None SSL authentication SET mode of the SSLAUTHMODE(M peer MRFDandatory) certificate 210305
AUTHMODE
Authentication Mode
BSC6900
AUTHMODE
Validate mode
BSC6900
None
AUTHMODE
Validate mode
BSC6900
None
AUTHNAME
Username to validate, for ADD the PPP or PPPLNK(Mandatory MP link ) negotiation None
AUTHNAME
Username to validate, for ADD the PPP or MPGRP(Mandatory MP link ) negotiation None
AUTHPWD
Validate password
BSC6900
AUTHPWD
Validate password
BSC6900
AUTHTYPE
BSC6900
ADD PPPLNK(Optional)
None
AUTHTYPE
BSC6900
ADD MPGRP(Optional)
None
AUTO
Auto negotiation
BSC6900
Whether the selfnegotiation mode is adopted 1. When the FG2 board is used and the port type is GE, the selfnegotiation mode must be adopted. 2. If the selfnegotiation mode is adopted, the FE port rate, working mode and flow control mode must be in accordance with the negotiation result. If the selfnegotiation mode is not adopted, the FE port rate, working mode SET and flow ETHPORT(Optional control mode ) must be LCK Auto unlock SCHTSK(Optional) switch
WRFD050421 MRFD210305
BSC6900
Duration of time after which the SET locked user is PWDPOLICY(Optio unlocked MRFDnal) automatically 210305 optical adaptation type between high-order path and multiplex SET OPT(Optional) section. None
AUTYPE
BSC6900
Identifying the available signature end index of an ASC. For detailed information of this ADD parameter, UPRACHASC(Opti refer to 3GPP WRFDonal) TS 25.304. 010401 Identifying the available signature start index of an ASC. For detailed information of this ADD parameter, UPRACHASC(Opti refer to 3GPP WRFDonal) TS 25.304. 010401
Identifying the available sub channels of an ASC. When a UE has been accessed to a sub channel, if [AICH transmission timing] is set to 1 (using the command "ADD UAICH"), the 4 bits of this parameter will be repeated 3 times to form a Bitstring (12). Then, it is put into an "and " calculation together with the Bitstring (12) correspondin g to the available sub channel allocated to ADD the PRACH, UPRACHASC(Opti and a 12-bit WRFDonal) data stream 010401
AvailCap
Capability of CN Node
BSC6900
AVOL
Alarm level
BSC6900
Capacity of a CN node. This parameter indicates the proportion of different CN nodes in the total capacity rather than the actual capacity of each CN node. In the case of IUFLEX, if one user cannot select a CN node according to the NAS Node Selection Function (NNSF), the user can select a CN node ADD according to UCNNODE(Mandat this ory) parameter. SET Alarm level ALMPORT(Optional for a digital ) port
Threshold of B1 and B2 signal degrade. This parameter specifies the generation threshold and the recovery threshold of the B1B2 signal degradation threshold in SDH frames at the optical SET OPT(Optional) port. None
B1B2SFTHR D
BSC6900
Threshold of B1 and B2 signal failure. This parameter specifies the generation threshold and the recovery threshold of the B1B2 signal failure threshold in SDH frames at the optical SET OPT(Optional) port. None
B3SDTHRD
BSC6900
Threshold of B3 signal degrade. This parameter specifies the generation threshold and the recovery threshold of the B3 signal degradation threshold in SDH frames at the optical SET OPT(Optional) port. None
B3SFTHRD
BSC6900
Threshold of B3 signal failure. This parameter specifies the generation threshold and the recovery threshold of the B3 signal failure threshold in SDH frames at the optical SET OPT(Optional) port. None
MRFD210502
MRFD210502
BSC6900
BackupPath
Backup Path
BSC6900
If [AutoAdaptive Background Noise Update Switch] is set to OFF, it is used to set background noise of the cell. If [AutoAdaptive Background Noise Update Switch] is set to ON, new background noise is restricted by this parameter and "BgnAbnorma lThd". For detailed information of this parameter, ADD refer to the UCELLCAC(Option 3GPP TS al) 25.133. Directory for BKP saving the LOGDB(Optional) backup file Path (complete path) of the backup file
BKP DB(Optional)
MRFD210301
BAKIP
BSC6900
STR IPCHK(Optional)
BAKMASK
BSC6900
STR IPCHK(Optional)
WRFD050421
BandInd
Band indicator
BSC6900
This parameter specifies the selected ADD frequency UEXT3GCELL(Man bands during WRFDdatory) cell setup. 010102 When the inter-RAT cell frequency number is within the range 512810, the parameter indicates whether this frequency number belongs to the DSC1800 or ADD PCS1900 UEXT2GCELL(Opti frequency WRFDonal) band. 020303 Indicating the selected frequency Band in the cell setup process. For ADD detailed UCELLSETUP(Man information of datory) this ADD parameter, UCELLQUICKSET refer to 3GPP WRFDUP(Mandatory) TS 25.433. 010101
BandInd
BSC6900
BandInd
Band indicator
BSC6900
BSC6900
This parameter specifies the maximum available bandwidth for each traffic class in the Cell_FACH state with the downlink HSDSCH in use. If the actual data flow exceeds the maximum bandwidth, the traffic is buffered so that the buffer occupancy is increased. As a result, the state transition from CellFACH to CELL-DCH occurs. This parameter should be set SET according to UFACHBANDWIDT the traffic WRFDH(Optional) class. 010688 Uniquely identifying a neighboring ADD base station UEXT2GCELL(Man with the same WRFDdatory) carrier 020303
BCC
BS color code
BSC6900
BcchArfcn
BSC6900
Identifying BCCH frequency number of the inter-RAT cell. BCCH: Broadcast Control Channel GSM1900 Frequency number: (511811) GSM1800 Frequency number: (511866) GSM900 Frequency number: (0125) or (9541024) GSM850 Frequency number: (127252) GSM450 Frequency number: (258294) GSM480 ADD Frequency UEXT2GCELL(Man number: (305- WRFDdatory) 341) 020303
BSC6900
This parameter specifies the transmission power of the HS-PDSCH that sends the data carried on the BCCH. When UE receive data from the HS-PDSCH in Enhanced CELL_FACH state, the data on the ADD BCCH is also UCELLEFACH(Opti sent on the WRFDonal) HS-PDSCH. 010688 When UE is in Enhanced CELL_FACH state, the data on the BCCH is also sent on the HS-PDSCH. Meanwhile, the HS-SCCH shall send signaling related to HSPDSCH. This parameter specifies the transmission ADD power of the UCELLEFACH(Opti HS-SCCH at WRFDonal) the time. 010688
BSC6900
BCHPower
BSC6900
ADD UBCH(Optional)
Offset of the BCH transmit power from the PCPICH transmit power in a cell. For detailed information of this parameter, refer to 3GPP TS 25.433 and TS WRFD25.331. 020501
BEARTYPE
BSC6900
DSP bearer type. MTP3: indicates that the lower layer bearer is the MTP3 used in ATM/TDM scenario; M3UA: indicates that the lower layer bearer is the M3UA used in IP scenario; MTP3_M3UA : indicates that the lower layer bearer is the MTP3 and M3UA used in ADD ATM/TDM/IP WRFDN7DPC(Mandatory) scenario. 050409
BearType
Bear Type
BSC6900
This parameter specifies the bearer type of the service. - R99: The service is carried on a non-HSPA channel. - HSPA: The service is SET carried on an UUSERGBR(Mand HSPA WRFDatory) channel. 050424 Threshold of continuous failed heartbeat detecting between the two RNCs in a RNC pool.If the heartbeat is not detected from the peer RNC for a successive number of times specified by this parameter, the local RNC ADD considers that URNCPOOL(Option the peer RNC WRFDal) is faulty. 040202
BSC6900
BSC6900
If the heartbeats are detected from the peer RNC for a successive number of times specified by this parameter, the local RNC considers that ADD the peer RNC URNCPOOL(Option is normally WRFDal) working. 040202 Interval for the local RNC sending the heartbeat to ADD the peer RNC URNCPOOL(Option in the same WRFDal) RNC pool. 040202
BSC6900
BSC6900
The bit rate threshold used to determine whether to perform soft handover for the Best Effort (BE) service on DCH. If current DL DCH bit rates of all the BE services of a user are lower than or equal to this threshold, the system will perform soft handover for this user to guarantee the service quality. When the velocity of the downlink DCH exceeds the restriction of this parameter, SET RNC will UHOCOMM(Option perform intraal) frequency
WRFD020202 WRFD020203
Timer for state transition from CPC to E_FACH of BE services, used to check whether the UE in the CELL_DCH(w ith CPC) state with BE SET services is in UUESTATETRANS the stable low TIMER(Optional) activity state.
BSC6900
Timer for state transition from CPC to FACH of BE services, used to check whether the UE in the CELL_DCH(w ith CPC) state with BE SET services is in UUESTATETRANS the stable low TIMER(Optional) activity state.
WRFD010686 WRFD010687
Timer for state transition from DCH to E_FACH of BE services, used to check whether the UE in the CELL_DCH(w ith DCH) state with BE SET services is in UUESTATETRANS the stable low WRFDTIMER(Optional) activity state. 010688
BSC6900
Timer for state transition from DCH to FACH of BE services, used to check whether the UE in the CELL_DCH state with nonreal-time SET services is in UUESTATETRANS the stable low WRFDTIMER(Optional) activity state. 010202
BeDlAct1
The first action selected by the QoS control algorithm when the DL QoS of BE service deteriorates.If QoS action is RateDegrade, then the rate will be downsized to the full SET coverage rate UQOSACT(Optiona according to l) 3-rates rule. The second action selected by the QoS control algorithm when the DL QoS of BE service deteriorates.If QoS action is RateDegrade, then the rate will be downsized to the full SET coverage rate UQOSACT(Optiona according to l) 3-rates rule.
BeDlAct2
BSC6900
BeDlAct3
The third action selected by the QoS control algorithm when the DL QoS of BE service deteriorates.If QoS action is RateDegrade, then the rate will be downsized to the full SET coverage rate UQOSACT(Optiona according to l) 3-rates rule.
BSC6900
Timer for state transition from E-DCH to FACH of BE services, used to check whether the UE in the CELL_DCH(w ith E-DCH) state with BE SET services is in UUESTATETRANS the stable low WRFDTIMER(Optional) activity state. 010202 This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of SET BE services UUESTATETRANS from E_FACH (Optional) to CPC.
BSC6900
This parameter specifies the occurrence time of 4A event for triggering the transition of BE services from E_FACH to CPC. This parameter prevents unnecessary reports that are caused by traffic volume SET instability UUESTATETRANS from being (Optional) triggered.
BSC6900
This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of SET BE services UUESTATETRANS from E_FACH WRFD(Optional) to DCH. 010688
BSC6900
This parameter specifies the occurrence time of 4A event for triggering the transition of BE services from E_FACH to DCH. This parameter prevents unnecessary reports that are caused by traffic volume SET instability UUESTATETRANS from being WRFD(Optional) triggered. 010688 This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of SET BE services UUESTATETRANS from E_FACH WRFD(Optional) to HS-DSCH. 010688
BSC6900
This parameter specifies the occurrence time of 4A event for triggering the transition of BE services from E_FACH to HS-DSCH. This parameter prevents unnecessary reports that are caused by traffic volume SET instability UUESTATETRANS from being WRFD(Optional) triggered. 010688 This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of BE services from FACH to SET E-DCH with UUESTATETRANS CPC (Optional) technology.
WRFD010686 WRFD010687
This parameter specifies the occurrence time of 4A event for triggering the transition of BE services from FACH to E-DCH with CPC technology. This parameter prevents unnecessary reports that are caused by traffic volume SET instability UUESTATETRANS from being (Optional) triggered. This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of BE services from FACH to SET HS-DSCH UUESTATETRANS with CPC (Optional) technology.
WRFD010686 WRFD010687
BSC6900
WRFD010686 WRFD010687
This parameter specifies the occurrence time of 4A event for triggering the transition of BE services from FACH to HS-DSCH with CPC technology. This parameter prevents unnecessary reports that are caused by traffic volume SET instability UUESTATETRANS from being (Optional) triggered.
WRFD010686 WRFD010687
BSC6900
This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of SET BE services UUESTATETRANS from FACH to WRFD(Optional) DCH. 010202
BSC6900
This parameter specifies the occurrence time of 4A event for triggering the transition of BE services from FACH to DCH. This parameter prevents unnecessary reports that are caused by traffic volume SET instability UUESTATETRANS from being WRFD(Optional) triggered. 010202 This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of SET BE services UUESTATETRANS from FACH to WRFD(Optional) E-DCH. 010202
BSC6900
BSC6900
This parameter specifies the occurrence time of 4A event for triggering the transition of BE services from FACH to E-DCH. This parameter prevents unnecessary reports that are caused by traffic volume SET instability UUESTATETRANS from being WRFD(Optional) triggered. 010202 This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of SET BE services UUESTATETRANS from FACH to WRFD(Optional) HS-DSCH. 01061111
This parameter specifies the occurrence time of 4A event for triggering the transition of BE services from FACH to HS-DSCH. This parameter prevents unnecessary reports that are caused by traffic volume SET instability UUESTATETRANS from being WRFD(Optional) triggered. 01061111
BSC6900
Timer for state transition from FACH or E_FACH to PCH of BE services, used to check whether the UE in the CELL_FACH SET state is in the UUESTATETRANS stable low WRFDTIMER(Optional) activity state. 010202
Timer for state transition from HSPA to E_FACH of BE services, used to check whether the UE in the CELL_DCH(w ith HSPA) state with BE SET services is in UUESTATETRANS the stable low WRFDTIMER(Optional) activity state. 010688
BSC6900
Timer for state transition from HSDSCH to FACH of BE services, used to check whether the UE in the CELL_DCH(w ith HS-DSCH) state with BE SET services is in UUESTATETRANS the stable low TIMER(Optional) activity state. Pending time after the traffic volume event 4B for state transition from HSPA to FACH is reported. This parameter is used to prevent too many traffic volume SET events 4B UUESTATETRANS being (Optional) reported.
WRFD010202 WRFD01061111
WRFD010202 WRFD01061111
This parameter is used to check whether the UE in the low activity state. If the UE is on HS-DSCH channel, the low activity counter increases by 1 every time SET traffic volume UUESTATETRANS event 4B is (Optional) reported.
WRFD010202 WRFD01061111
When the traffic volume is below the 4B threshold and remains so for the period specified by this parameter, the event 4B is reported. This parameter prevents unnecessary traffic volume events that are caused by traffic volume SET instability UUESTATETRANS from being (Optional) triggered.
WRFD010202 WRFD01061111
BSC6900
SET UFRC(Optional)
This parameter specifies the rate threshold of 2ms TTI on the E-DCH for HSUPA BE service. When the cell capability and UE capability allows 2ms TTI, 2ms TTI on the E-DCH is used if the PS BE service carried on HSUPA with uplink rate isn't less than this threshold. Otherwise, 10ms TTI is used.
WRFD01061206 WRFD01061403
BSC6900
Timer for rejecting rate increase after rate decrease is performed across the Iur interface for BE services. If the best cell is on the DRNC, the timer starts when rate decrease based on RLC retransmissio n is triggered. Before the timer expires, requests for rate increase triggered by DL traffic SET volume event UQOSACT(Optiona 4A will be WRFDl) rejected. 021101 The relative power margin of single BE traffic, used to calculate the triggering threshold of event F, can avoid the fluctuation of traffic rate in case the ADD power UCELLDCCC(Optio becomes nal) restricted SET after rate is WRFDUDCCC(Optional) increased. 021101
BSC6900
When the parameter is set to YES, the QOS control algorithm is used for BE services. When the parameter is set to NO, the QOS control algorithm is not used for BE services.The QOS actions of BE services include rate downsizing, inter frequency SET handover and UQOSACT(Optiona inter rat l) handover.
BetaC
Reference BetaC
BSC6900
This parameter specifies the power occupancy of the control part of reference TFC. For details of this parameter, ADD refer to the UTYPRABBASIC(M 3GPP TS WRFDandatory) 25.214. 020504
BetaD
Reference BetaD
BSC6900
This parameter specifies the power occupancy of the data part of reference TFC. For details of this parameter, ADD refer to the UTYPRABBASIC(M 3GPP TS WRFDandatory) 25.214. 020504 The first action selected by the QoS control algorithm when the UL QoS of BE service deteriorates.If QoS action is RateDegrade, then the rate will be downsized to the full SET coverage rate UQOSACT(Optiona according to l) 3-rates rule.
BeUlAct1
BeUlAct2
BSC6900
The second action selected by the QoS control algorithm when the UL QoS of BE service deteriorates.If QoS action is RateDegrade, then the rate will be downsized to the full SET coverage rate UQOSACT(Optiona according to l) 3-rates rule. The third action selected by the QoS control algorithm when the UL QoS of BE service deteriorates.If QoS action is RateDegrade, then the rate will be downsized to the full SET coverage rate UQOSACT(Optiona according to l) 3-rates rule.
BeUlAct3
BSC6900
For BE service, When the parameter is set to SINGLE, an UL event 6A1 or 5A can independently trigger the QOS enhancement action. The 6A1, 5A switch settings decide whether to perform 6A1 or 5A measurement control. When the parameter is set to COMBINE, only combined events 6A1+5A can trigger the QOS enhancement SET action, and UQOSACT(Optiona whether to l) perform 6A1 Event 5A measurement switch when BeUlEvTrigIn d is set to SINGLE for BE service. If this parameter is set to YES, SET event 5A UQOSACT(Optiona measurement l) is delivered.
BeUlQos6A1 McSwitch
BSC6900
Event 6A1 measurement switch when BeUlEvTrigIn d is set to SINGLE for BE service. If this parameter is set to YES, SET event 6A1 UQOSACT(Optiona measurement l) is delivered.
BSC6900
UL event 6D measurement switch for BE service. If this parameter is set to YES, SET event 6D UQOSACT(Optiona measurement l) is delivered.
BSC6900
Timer to trigger the next QoS enhancement action for UL BE services. This parameter specifies the duration of waiting for the UL QoS enhanced acknowledge ment after UL rate adjustment. The timer starts when the BE UL rate adjustment procedure is triggered, and stops when the RNC receives a 6B1/6B2 SET event or when UQOSACT(Optiona the timer l) expires.
BSC6900
STR IPCHK(Optional)
Timeout times of the BFD packet. If several consecutive BFD packets are not received, the BFD session is set to the WRFDDOWN state. 050421
BGGBR
The MAC-c flow on the Iub interface will increase after Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_FACH state, this parameter determines the guaranteed speed of the MAC-c flow that sends background ADD service data UCELLEFACH(Opti on the Iub WRFDonal) interface. 010688 The MAC-c flow on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_FACH state, this parameter determines the maximum speed of the MAC-c flow that sends background ADD service data UCELLEFACH(Opti on the Iub WRFDonal) interface. 010688
BGMBR
This parameter is applied when "BGNSwitch" is set to ON. (1) If the difference of measured background noise without filtered and the current background noise is larger than the RTWP threshold, the background noise will not be updated. (2) If the difference of new background noise and the configured value is larger than the RTWP threshold, the ADD background UCELLCAC(Option noise will not al) be updated.
WRFD020101 WRFD020102
BGNAdjustTi meLen
Only when the measured background noise's duration reaches this parameter, the output of the autoadaptive background noise update filter could be regarded as effect background noise, and the current value is replaced with the new one. At the same time, the autoadaptive status should be restarted; otherwise, the output could not be regarded as ADD the effective UCELLCAC(Option background al) noise.
WRFD020101 WRFD020102
BgnEndTime
BSC6900
(1) This parameter, along with the [Algorithm start time], is used to limit the validation time of the background noise automatic update algorithm. If [Algorithm stop time] is greater than [Algorithm start time], and the background noise automatic update algorithm is enabled, then the algorithm is activated during the period of [Algorithm stop time] to [Algorithm ADD start time] UCELLCAC(Manda each day. In tory) other periods,
WRFD020101 WRFD020102
BSC6900
When the number of uplink equivalent users is not larger than this parameter, the RTWP could be regarded as background noise. Therefore, the measured RTWP could be input to the autoadaptive background noise update filter; otherwise, the RTWP could not be regarded as background noise, and should not be input to the filter, and at the same WRFDADD time, the auto- 020101 UCELLCAC(Option adaptive WRFDal) status should 020102
BSC6900
(1) This parameter, along with the [Algorithm stop time], is used to limit the validation time of the background noise automatic update algorithm. If [Algorithm stop time] is greater than [Algorithm start time], and the background noise automatic update algorithm is enabled, then the algorithm is activated during the period of [Algorithm stop time] to [Algorithm ADD start time] UCELLCAC(Manda each day. In tory) other periods, When the parameter is 'OFF', the auto-adaptive background noise update algorithm is switched off. Otherwise, ADD the algorithm UCELLCAC(Option is switched al) on.
WRFD020101 WRFD020102
BGNSwitch
BSC6900
WRFD020101 WRFD020102
BSC6900
BLERQuality
The difference of RTWP that trigger the update of background noise. If the difference is larger than the threshold, the ADD background UCELLCAC(Option will be al) updated. This parameter specifies the target transmission quality of DCH, that is, target BLER of DCH on the radio interface if the subflow is carried on DCH. This QoS-related parameter is used by the CRNC to determine the target SIR value for use in admission and power control. To calculate the value of this parameter, obtain the result of 10*Lg(BLER) where the BLER refers ADD to the actual UTYPRABOLPC(M BLER, and andatory) then round
WRFD020101 WRFD020102
WRFD020503
BlindHoFlag
Indicating whether to perform blind handover. FALSE: The cell is not in the alternative cells for blind handover, so blind handover to this cell cannot be triggered. TRUE: The cell is in the alternative ADD cells for blind UINTERFREQNCE handover, so LL(Optional) blind ADD handover to U2GNCELL(Option this cell might al) be triggered.
WRFD020103 WRFD021200
BSC6900
This parameter is used in the algorithm of the load reshuffling (LDR) intrafrequency blind handover. This parameter defines how many measurement reports are needed for making the blind handover decision. The RNC starts blind handover only if the UE continuously reports adequate intrafrequency measurement reports that SET meet the UINTRAFREQHO( quality Optional) requirements
WRFD020103 WRFD020104
BSC6900
This parameter specifies the intrafrequency measurement report interval of blind handover. It determines the intrafrequency measurement reporting interval of Load Reshuffling (LDR) blind handover. The smaller the value of this parameter, the smaller the intrafrequency measurement reporting interval, and the smaller the time for intraSET frequency UINTRAFREQHO( measurement Optional) . But the
WRFD020103 WRFD020104
BlindHOPrio
BSC6900
Indicating the priority of blind handover. The value 0 represents the highest priority. Priorities 0~15 are assigned to concentric neighboring cells, which can ensure successful handover. Priorities 16~30 are assigned to neighboring cells for blind handover, which cannot ADD ensure U2GNCELL(Mandat successful WRFDory) handover. 020310
BSC6900
Blind handover condition. If the value is not -115, the handover is defined as Conditional Blind HO, which is used for the interfrequency neighboring cells of the same coverage. If the value is 115, the handover is defined as Direct Blind HO, which is used for the interfrequency WRFDADD neighboring 020103 UINTERFREQNCE cells of larger WRFDLL(Optional) coverage. 021200
BSC6900
This parameter specifies the quality threshold for the event 1F reported cell to trigger blind handover. This parameter defines the lowest quality threshold of the emergency blind handover. The blind handover is implemented only if the signal quality in the cell, which reports event 1F, exceeds the specified SET threshold. UINTRAFREQHO( Otherwise, Optional) the report will ADD be discarded. UCELLINTRAFRE This WRFDQHO(Optional) parameter is 020302
BSC6900
Base Station SET Controller ALMBLKSW(Option alarm blink MRFDal) filter switch 210304
BLKPRD
BSC6900
Alarm blink filter threshold. When the interval between the generation and clearance of an alarm is equal to or smaller than the alarm blink filter threshold, the alarm is SET filtered and ALMBLKPARA(Opti not reported MRFDonal) to the NMS. 210304
BLKSTATPR D
Measurement period of filtered Base SET Station ALMBLKSW(Option Controller MRFDal) alarms 210304 Switch controlling whether to perform statistics of SET Base Station ALMBLKSW(Option Controller MRFDal) alarms 210304
BSC6900
BSC6900
This timer is started when an AAL2 signaling entity sends the peer node SET a request for AAL2TMR(Optional blocking an WRFD) AAL2 path. 05030104
BSC6900
Whether to use the device IP address as the local IP address. When this parameter is set to "YES", the device IP address is used as the local IP address of the PPP link. When this parameter is set to "NO", the device IP address is not used as the local IP address of the PPP link. ADD In this case, PPPLNK(Mandatory you need to ) reconfigure ADD the local IP MPGRP(Mandatory address of ) the PPP link. Whether to SET report the BOXRPT(Mandator alarm to the y) alarm box
BOXFLG
BSC6900
MRFD210304
BRDCLASS
Board Class
BSC6900
STR BKP(Mandatory) SET FCSW(Mandatory) SET FCCPUTHD(Manda tory) SET FCMSGQTHD(Man datory)
MRFD210301
BRDCLASS
Board Class
BSC6900
MRFD210301
BRDCLASS
Board Class
BSC6900
Classes of boards classified SET according to CPUTHD(Mandator function y) modules Classes of boards classified according to function modules
MRFD210301
BRDCLASS
Board Class
BSC6900
ADD BRD(Mandatory)
MRFD210301
BRDTYPE
Board Type
BSC6900
Type of the ADD BRD(Optional) board SET ETHPORT(Mandat ory) Board type ADD PPPLNK(Mandatory ) Board type ADD MPGRP(Mandatory ) ADD MPLNK(Mandatory) Board type
MRFD210301
BRDTYPE
Board type.
BSC6900
None
BRDTYPE
Board type
BSC6900
None
BRDTYPE
Board type
BSC6900
None
BS
Backup Style
BSC6900
BKP LOGDB(Optional)
BSICVerify
BSC6900
SET UINTERRATHOCO V(Optional) SET UINTERRATHONC OV(Optional) ADD UCELLINTERRATH OCOV(Optional) ADD UCELLINTERRATH ONCOV(Optional) ADD UCELLMBDRINTE RRAT(Optional)
Backup mode of the log. If "ENTIRE" is selected, all logs in the current database are backed up. If "INCREMEN TAL" is selected, the logs generated after last backup are backed up. Base Station Identity Code (BSIC) verification switch. 1. BSIC(Base Station Identity Code): identity code of the base station. 2. This parameter is used to control cells where interRAT measurement reports are triggered. When the value is REQUIRED, the measurement report is triggered after the BSIC of the measured cell is deciphered correctly; when the value is
MRFD210305
BT
Board type
BSC6900
MRFD210101
BT
Board type
BSC6900
SET CLK(Mandatory)
MRFD210502
BT
Board type
BSC6900
MRFD210401
BT
Board type
BSC6900
MRFD210401
BT
Board type
BSC6900
WRFD05030101
BT
Board type
BSC6900
Board type
None
BT
Board type
BSC6900
WRFD05030101
BT
Board Type
BSC6900
WRFD050304
BT
Board type
BSC6900
SET OPT(Mandatory)
Board type
None
BT
Board Type
BSC6900
SET COPTLNK(Mandato ry) Board type ADD ATMLOGICPORT( Optional) Board type ADD IPLOGICPORT(Ma ndatory) Board type Whether to enable the data binding function Switch for adjusting the dynamical bandwidth of the logical port. If this switch is turned on, the system adjusts the dynamical bandwidth of the logical port according to the transmission quality of the link monitored by the IPPM. After this switch is turned on, the IPPM function must be activated on the IPPATH of this logical port. For details about the IPPM, see the ADD description of IPLOGICPORT(Ma the command ndatory) "ACT IPPM". ADD SCTPLNK(Optional )
WRFD05030102
BT
Board type
BSC6900
None
BT
Board Type
BSC6900
None
BSC6900
WRFD050402
BWADJ
BSC6900
WRFD050422
BSC6900
BSC6900
If the available backward bandwidth is less than or equal to this value, the backward congestion alarm is emitted and backward ADD congestion TRMLOADTH(Optio control is nal) striggered. If the available backward bandwidth is greater than this value, the backward congestion alarm is cleared and backward ADD congestion TRMLOADTH(Optio control is nal) stopped. If the ratio of available backward bandwidth is greater than this value, the backward congestion alarm is cleared and backward ADD congestion TRMLOADTH(Optio control is nal) stopped.
WRFD050406 MRFD211503
WRFD050406 MRFD211503
BSC6900
WRFD050406 MRFD211503
BSC6900
If the ratio of available backward bandwidth is less than or equal to this value, the backward congestion alarm is emitted and backward ADD congestion TRMLOADTH(Optio control is nal) triggered. If the available backward bandwidth is greater than this value, the backward overload congestion alarm is cleared and backward ADD overload TRMLOADTH(Optio control is nal) stopped. If the ratio of available backward bandwidth is greater than this value, the backward overload congestion alarm is cleared and backward ADD overload TRMLOADTH(Optio control is nal) stopped.
WRFD050406 MRFD211503
WRFD020107 MRFD211503
WRFD020107 MRFD211503
If the available backward bandwidth is less than or equal to this value, the backward overload congestion alarm is emitted and backward ADD overload TRMLOADTH(Optio control is nal) triggerd. If the ratio of available backward bandwidth is less than or equal to this value, the backward overload congestion alarm is emitted and backward ADD overload TRMLOADTH(Optio control is nal) triggered.
WRFD020107 MRFD211503
WRFD020107 MRFD211503
BWDRESVH OTH
Ratio of reserved backward ADD bandwidth for TRMLOADTH(Optio handover nal) user
WRFD050406 MRFD211503
Reserved backward ADD bandwidth for TRMLOADTH(Optio handover nal) user Maximum ratio of the ADD estimated IPLOGICPORT(Opt bottleneck ional) bandwidth
WRFD050406 MRFD211503
BSC6900
None
BWMODE
Bandwidth Mode
BSC6900
WRFD050406
BWRTPTH
Threshold of bandwidth change based on the load control algorithm. When the system detects that the change of the available bandwidth exceeds this threshold through the IPPM, the system starts adjusting the ADD bandwidth of IPLOGICPORT(Opt the logical ional) port. None
CacSwitch
BSC6900
The parameter values are described as follows: NODEB_CRE DIT_CAC_S WITCH: The system performs CAC based on the usage state of NodeB credit. When the NodeB's credit is not enough, the system SET rejects new UCACALGOSWITC access WRFDH(Optional) requests. 020101 Indicating SET whether to UCALLSHOCKCTR control call WRFDL(Optional) shock control. 040100 Indicating the SET period of call UCALLSHOCKCTR shock control WRFDL(Optional) judging. 040100 Decide which carrier is prior when ARP and SET TrafficClass UUSERPRIORITY( are both Optional) identical. WRFD020106 WRFD020107 WRFD010505
BSC6900
BSC6900
BSC6900
CARRYF
BSC6900
WRFD05030104
BSC6900
ADD IPPATH(Optional)
Whether to indicate that the IP Path is carried on the IP logic port or resource group. NULL indicate the IP Path is carried on the WRFDphysics port. 050402
BSC6900
Number of the bearer FRAATM(Fra ctional ATM) link. The parameter is valid only when the ADD bearer type is SAALLNK(Mandato set to WRFDry) FRAATM. 05030105 Number of the FRA ATM link that carries the PATH. This field is valid only when the " bearer type " parameter is set to FRAATM. The bearing FRAATM link ADD must be AAL2PATH(Mandat configured WRFDory) already. 05030104 Fractional ATM link number of the ADD bearer IPOAPVC(Optional) network None Fractional ADD ATM link ATMLOGICPORT( number of the Optional) logical port None
BSC6900
BSC6900
BSC6900
BSC6900
Number of the bearer IMA group. The parameter is valid only ADD when the SAALLNK(Mandato bearer type is WRFDry) set to IMA. 05030105 Number of the IMA group that carries the PATH. The field is value only when the " bearer type " parameter is set to IMA. The bearing IMA group ADD must be AAL2PATH(Mandat configured WRFDory) already. 05030104 ADD IMA group IPOAPVC(Optional) number None ADD IMA group ATMLOGICPORT( number of the Optional) logical port None
BSC6900 BSC6900
BSC6900
BSC6900
BSC6900
BSC6900
When the NCP/CCP is based on ATM, set Bearing link type to SAAL. When the NCP/CCP is based on IP, set Bearing link type to SCTP. When the NCP/CCP is based on ATM/IP, set Bearing link type to SAALSCTP. For detailed information of ADD this UCCP(Mandatory) parameter, ADD refer to 3GPP UNCP(Mandatory) TS 25.430. Number of the NCOPT port that carries the SAAL link. The parameter is valid only when the ADD bearer type is SAALLNK(Mandato set to ry) NCOPT. Number of the NCOPT port that carries the path. This field is valid only when the " bearer type ADD " parameter is AAL2PATH(Mandat set to ory) NCOPT.
WRFD050402 WRFD050404
WRFD05030105
WRFD05030104
BSC6900
NCOPT port ADD number of the IPOAPVC(Mandato bearer ry) network None Optical ADD interface ATMLOGICPORT( number of the Optional) logical port None Number of ADD the slot SAALLNK(Mandato bearing the ry) SAAL link
CARRYPN
BSC6900
CARRYSN
BSC6900
WRFD05030105
CARRYSN
BSC6900
Number of ADD the slot AAL2PATH(Mandat bearing the ory) AAL2 link Number of ADD the subrack SAALLNK(Mandato bearing the ry) SAAL link
WRFD05030104
CARRYSRN
BSC6900
WRFD05030105
CARRYT
Bearing type
BSC6900
ADD Bearer type of SAALLNK(Mandato the SAAL link WRFDry) outgoing port 05030105
CARRYT
Bearing type
BSC6900
Lower layer link type of bearing the Path. UNI: see"ADD UNILNK"; IMA: see"ADD IMALNK"; FRAATM: see"ADD FRALNK"; NCOPT: see"LST OPT"; ATMLOGICP ORT: see"ADD ATMLOGICP ADD ORT"; AAL2PATH(Mandat NULL: used WRFDory) when testing. 05030104 ADD IPOAPVC(Mandato ry) Bearer type
CARRYT
Bearing type
BSC6900
WRFD050105
CARRYT
ADD Bearer type of ATMLOGICPORT( the logical Mandatory) port None ADD Bearer type of IPLOGICPORT(Opt the logical ional) port None Port type of the SBFD/ARP bearer
CARRYT
CARRYT
BSC6900
STR IPCHK(Optional)
WRFD050421
BSC6900
Number of the bearer UNI link. The parameter is valid only ADD when the SAALLNK(Mandato bearer type is WRFDry) set to UNI. 05030105
CARRYUNILN KN CARRYUNILN KN
BSC6900 BSC6900
Number of the UNI link that carries the PATH. The field is value only when the " bearer type " parameter is set to UNI. The bearing ADD UNI link must AAL2PATH(Mandat be configured WRFDory) already. 05030104 ADD UNI link IPOAPVC(Optional) number None ADD ATMLOGICPORT( UNI link Optional) number
BSC6900
None
CARRYVCI
Bearing VCI
BSC6900
ADD VCI value of SAALLNK(Mandato the SAAL out WRFDry) BSC6900 05030105
CARRYVCI
Bearing VCI
BSC6900
CARRYVPI
Bearing VPI
BSC6900
WRFDADD VPI value of 050404 SAALLNK(Mandato the SAAL out WRFDry) BSC6900 05030105
CARRYVPI
Bearing VPI
BSC6900
CARRYVPN
BSC6900
ATM logic port number of the bearer. The parameter is valid only when the bearer type is ADD set to SAALLNK(Mandato ATMLOGICP WRFDry) ORT. 050406
CARRYVPN
BSC6900
ATM logic port No. bearing the PATH. This field is valid only when the " bearer type " parameter is set to ATM logic port. The bearing ATM logic port must be configured. The value mapping between interface boards and ATM logic ports are as follows: AEUa: 0~127; AOUa: 0~255; UOIa_ATM: 0~383; AOUc: 0~499; UOIc: 0~499. The ATM logic port must be ADD the leaf ATM AAL2PATH(Mandat logic port (the WRFDory) last level ATM 05030104 ATM virtual ADD port number IPOAPVC(Mandato of the bearer ry) PVC None IP address of ADD the CBC (Cell UCBSADDR(Mand Broadcast WRFDatory) Center) 011000 ADD UCBSADDR(Mand atory) ADD IPLOGICPORT(Opt ional) Mask of the sub-network of the CBC IP WRFDaddress 011000 Maximum burst size (MBS) None
CARRYVPN
BSC6900
BSC6900
CBCMASK
BSC6900
CBS
BSC6900
CBSCTHD
BSC6900
CPU usage threshold for Cell Broadcast Service (CBS) flow control. When the average CPU usage of sliding windows reaches or exceeds the threshold, SET CBS flow FCCPUTHD(Option control is WRFDal) triggered. 040100 Packet queue usage threshold for CBS flow control. When the average packet queue usage of sliding windows reaches or exceeds the threshold, SET CBS flow FCMSGQTHD(Opti control is WRFDonal) triggered. 040100 ADD UCELLQUICKSET UP(Mandatory) A CBS Operator of the cell.
CBSCTHD
BSC6900
CBSOpIndex
BSC6900
WRFD011000
CBSRTHD
BSC6900
CPU usage threshold for recovery from CBS flow control. When the average CPU usage of sliding windows is lower than the threshold, SET CBS flow FCCPUTHD(Option control is WRFDal) stopped. 040100 Packet queue usage threshold for recovery from CBS flow control. When the average packet queue usage of sliding windows is lower than the threshold, SET CBS flow FCMSGQTHD(Opti control is WRFDonal) stopped. 040100
CBSRTHD
BSC6900
CBSSAC
CBS SAC
BSC6900
Together with PLMN code and LAC, ADD uniquely UCELLCBSSAC(M correspondin WRFDandatory) g to a cell. 011000 ADD UCELLQUICKSET UP(Mandatory) SET FCSW(Optional) CBS service area which the cell belongs to. Whether to control CBS flow
CBSSAC
BSC6900
WRFD011000 WRFD040100
CBSSW
BSC6900
CBSwitch
CB Switch
BSC6900
SET Switch of the URNCCBPARA(Opt inner CBS WRFDional) function. 011001 Whether to enable the certificate chain DISABLE: indicating that the certificate chain is disabled ENABLE: indicating that SET the certificate CERTFILE(Optional chain is MRFD) enabled 210305
BSC6900
CCCHGBR
BSC6900
The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_FACH state, this parameter determines the guaranteed speed of the MAC-c flow that sends common control ADD channel data UCELLEFACH(Opti on the Iub WRFDonal) interface. 010688 The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_FACH state, this parameter determines the maximum speed of the MAC-c flow that sends common control ADD channel data UCELLEFACH(Opti on the Iub WRFDonal) interface. 010688
CCCHMBR
BSC6900
CCHPRIPAT H
BSC6900
Primary path that carries the common ADD channel WRFDTRMMAP(Optional) services 050406 Common channel primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the ADD common WRFDLOADEQ(Optional) channel. 050404
CCHPRITH
BSC6900
BSC6900
Secondary path that carries the common ADD channel TRMMAP(Optional) services
WRFD050406
BSC6900
Common channel primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the ADD common WRFDLOADEQ(Optional) channel. 050404 Transmission period of the CCM packet WRFDin the MA 050425
BSC6900
ADD ETHMA(Optional)
CCTMR
Timer_CC
BSC6900
A protection timer started after the BGN, END, RS, and ER message are sent. If it times out, the system ADD resends WRFDSAALLNK(Optional) messages. 050301
CDVT
None
When call shock control starts, the AMR_RRC number can SET be accessed UCALLSHOCKCTR per second WRFDL(Optional) for cell. 040100 Average altitude of the cell coverage area in the WGS-84 coordinates. This is controlled by MTRLGY and ADD valid when USMLCCELL(Optio MET~0(metri WRFDnal) c system). 020801
BSC6900
BSC6900
This parameter specifies the average altitude of the cell coverage area in the WGS-84 coordinates. This is controlled by MTRLGY and valid when ADD IMP~1(British USMLCCELL(Optio measurement nal) ). The algorithms with the above values represent are as follow: TX_DIVERSI TY_ON_TO_ OFF:When TX Diversity is on to off,the algorithms of cell capacity auto handle is open. TX_DIVERSI TY_OFF_TO _ON:When TX Diversity is off to on,the algorithms of ADD cell capacity UCELLALGOSWIT auto handle is CH(Optional) open.
WRFD020801
WRFD020101
BSC6900
1)DELAY_AC TIVATION_S UPPORT (delay activation support indicator):whe n the indicator is TRUE, it means that the cell support delay activation. Delayed Activation IE indicates that the activation of the DL power shall be delayed until an indicated CFN or until a separate activation indication is received. 2)HSDSCH_ SUPPORT(H SDSCH support indicator):whe ADD n the indicator UEXT3GCELL(Man is TRUE, it datory) means that
WRFD020203 WRFD021400
BSC6900
Altitude of the cell center in the WGS-84 coordinates. This is controlled by MTRLGY and ADD valid when USMLCCELL(Optio MET~0(metri WRFDnal) c system). 020801
BSC6900
This parameter specifies the altitude of the cell center in the WGS-84 coordinates. This is controlled by MTRLGY and valid when ADD IMP~1(British USMLCCELL(Optio measurement nal) ). Latitude of the cell center in the WGS84 coordinates. The value correspondin g to the latitude A degrees B minutes C seconds is [A + (B/60) + (C/3600)] / 0.000001. For example, the value correspondin g to the latitude 31 degrees 30 minutes 36 seconds is [31 + (30/60) + (36/3600)] / 0.000001 = 31510000. This is controlled by GCDF and ADD valid when USMLCCELL(Optio DEG~0(degre nal) e format).
WRFD020801
WRFD020801
BSC6900
This parameter specifies the latitude of the cell center in the WGS-84 coordinates.T he input format is ddd:mm:ss.ss ss. This is controlled by GCDF and valid when SEC~1(degre ADD e, minute, USMLCCELL(Optio second WRFDnal) format). 020801
Longitude of the cell center in the WGS84 coordinates. The value correspondin g to the longitude A degrees B minutes C seconds is [A + (B/60) + (C/3600)] / 0.000001. For example, the value correspondin g to the longitude 121 degrees 40 minutes 36 seconds is [121 + (40/60) + (36/3600)] / 0.000001 = 121676666. This is controlled by GCDF and ADD valid when USMLCCELL(Optio DEG~0(degre WRFDnal) e format). 020801
BSC6900
This parameter specifies the longitude of the cell center in the WGS84 coordinates.T he input format is ddd:mm:ss.ss ss. This is controlled by GCDF and valid when SEC~1(degre ADD e, minute, USMLCCELL(Optio second WRFDnal) format). 020801 WRFD020202 Indicating the WRFDtarget cell 020203 HO choose WRFDUCELL(Mandatory) method. 020303
CellChoice
BSC6900
BSC6900
Environment ADD type of the USMLCCELL(Optio cell coverage WRFDnal) area. 020801 Defining the radio environment type of the cell, such as a typical town cell, urban ADD cell, and UCELLCAC(Option mountain WRFDal) area cell. 020101
CellEnvType
BSC6900
BSC6900
Deviation of altitude standard in the cell coverage area in the WGS-84 coordinates. This is controlled by MTRLGY and ADD valid when USMLCCELL(Optio MET~0(metri WRFDnal) c system). 020801 This parameter specifies the standard deviation of altitude in the cell coverage area in the WGS-84 coordinates. This is controlled by MTRLGY and valid when ADD IMP~1(British USMLCCELL(Optio measurement WRFDnal) ). 020801 When call shock control starts, the register and 3G->2G reselect number can SET be accessed UCALLSHOCKCTR per second WRFDL(Optional) for cell. 040100
BSC6900
BSC6900
Meaning: Specifies the host type of a cell. This parameter specifies the host type of a cell in the case that the RNC node redundancy feature is enabled. When this parameter is set to "SINGLEHOS T", the cell is controlled by only one RNC. When this parameter is set to "PRIMHOST" or "SECHOST", the cell is controlled by two RNCs (a primary RNC and a ADD secondary UEXT3GCELL(Opti RNC). By WRFDonal) default, the 040202 ID of the cell to which a GPS receiver MRFDbelongs 210301
CellId
Cell ID
BSC6900
ADD GPS(Mandatory)
CellId
Cell ID
BSC6900
WRFD010101 WRFD010502 WRFD010801 WRFD010901 WRFD010902 WRFD010901 WRFD021101 WRFD021301 MRFD211401 MRFD211402 MRFD211403 MRFD211404 WRFD020117 Uniquely WRFDidentifying a 020801 cell. For WRFDADD detailed 020802 UCELLRLACTTIME information of WRFD(Mandatory) this 020803 ADD parameter, WRFDUCELLCBSSAC(M refer to 3GPP 020805 andatory) TS 25.401. WRFD-
CellId
Cell ID
BSC6900
ADD UCELLAMRCWB( Mandatory) ADD UCELLDCCC(Mand atory) ADD UCELLAMRC(Man datory) ADD UCELLGPSFRMTI MING(Mandatory) ADD UCELLQUALITYM EAS(Mandatory) ADD UCELLACCESSST RICT(Mandatory) ADD UCELLALGOSWIT CH(Mandatory) ADD UCELLCAC(Manda tory) ADD UCELLDSACMANU ALPARA(Mandatory ) ADD UCELLHCS(Manda tory) ADD UCELLLDB(Mandat ory) ADD
ID of a cell. For detailed information about this parameter, refer to 3GPP TS 25.401. None
CellId
Cell ID
BSC6900
Uniquely identifying a cell. For detailed information of this ADD parameter, USMLCCELL(Mand refer to 3GPP atory) TS 25.401. None
CellId
Cell ID
BSC6900
CellId
Cell ID
BSC6900
ADD UCELLDRD(Manda tory) ADD UCELLFRC(Mandat ory) ADD UCELLREDIRECTI ON(Mandatory) HO UCELL(Mandatory) ADD UINTRAFREQNCE LL(Mandatory) ADD UINTERFREQNCE LL(Mandatory) ADD UCELLINTRAFRE QHO(Mandatory) ADD UCELLCMCF(Mand atory) ADD UCELLHOCOMM( Mandatory) ADD UCELLINTERFRE QHOCOV(Mandato ry) ADD UCELLINTERFRE QHONCOV(Mandat ory) ADD UCELLINTERRATH OCOV(Mandatory) ADD UCELLINTERRATH ONCOV(Mandatory ) ADD UCELLHCSHO(Ma ndatory)
None
WRFD020202
CellId
BSC6900
WRFD020203
CellId
Cell ID
BSC6900
BSC6900
Uniquely identifying a WCDMA cell, to which neighboring ADD GSM cells U2GNCELL(Mandat can be ory) added. SET Indicate the UCIDCHG(Optional period of cell ) ID changing.
WRFD020303 WRFD020101
BSC6900
Indicating whether to SET use changing UCIDCHG(Optional cell id in Uu WRFD) interface. 020101 Flag of ADD CELLID+RTT USMLCCELL(Optio location WRFDnal) activation. 020801 UE positioning mode when the CELLID+RTT method is selected. The UE supports both UEbased CELLID+RTT mode and UEassisted CELLID+RTT WRFDmode. 020801
BSC6900
SET USMLC(Optional)
CellLdrSfRes Cell LDR SF Thd reserved threshold CellLocCfgTy Cell Location pe Setting Type
BSC6900
BSC6900
Cell SF reserved threshold. The code load reshuffling could be triggered only when the minimum available SF ADD of a cell is UCELLLDR(Option higher than al) this threshold. ADD Cell location USMLCCELL(Mand configuration atory) type. ADD UEXT3GCELL(Man datory) ADD UCELLSETUP(Man datory) ADD UCELLQUICKSET Identifying a UP(Mandatory) cell name.
CellName
Cell name
BSC6900
None
BSC6900
If the cell downlink load exceeds this threshold, the algorithm will decrease the pilot transmit power of the cell so as to increase the whole system's capacity. This parameter is ADD based on UCELLLDB(Option network WRFDal) planning. 020104
BSC6900
If the times the UE in the CELL_PCH state performs cell reselection is greater than or equal to the threshold, it is regarded that the cell reselection is frequent. When the timer expires, the target state is set to URA_PCH. In the next cell update procedure, the UE is informed of state transition to URA_PCH in the SET CELL_UPDA UUESTATETRANS TE_CONFIR WRFD(Optional) M message. 010202 Length of the cell reselection frequency timer. This parameter is used together with CellReSelect Counter to detect the frequency of cell reselection of SET the UE in the UUESTATETRANS CELL_PCH WRFDTIMER(Optional) state. 010202
BSC6900
BSC6900
Indicating whether the cell is reserved for extension. If [Cell barred indicator] is NOT_BARRE D, and the cell is not reserved for operators but for extension, the UEs regard the cell as barred. For detailed information of this ADD parameter, UCELLACCESSST refer to 3GPP WRFDRICT(Optional) TS 25.331. 021103
BSC6900
Indicating whether the cell is reserved for operators. If the status of cell is NOT_BARRE D, and the cell is reserved for operators, the UEs allocated with Access Class 11 or 15 in the local PLMN can select or reselect the cell. While the UEs allocated with Access Class 0~9, 12 and 14 cannot select or reselect the cell. For detailed information of this ADD parameter, UCELLACCESSST refer to 3GPP WRFDRICT(Optional) TS 25.331. 021103
Flag of whether adding a cell into the active set will affect the relative threshold of the event 1A. This parameter is a flag of whether adding the cell into the active set will affect the relative threshold of the event 1A NOT_AFFEC T: Adding the cell into the active set does not affect the relative threshold of the event 1A. The cell signal will affect the UE evaluate ADD whether event UINTRAFREQNCE 1A should LL(Optional) occurre.
Flag of whether adding a cell into the active set will affect the relative threshold of the event 1B. This parameter is a flag of whether adding the cell into the active set will affect the relative threshold of the event 1B NOT_AFFEC T: Adding the cell into the active set does not affect the relative threshold of the event 1B. The cell signal will affect the UE evaluate ADD whether event UINTRAFREQNCE 1B should LL(Optional) occur.
BSC6900
When the RRC REQ total number of one cell reach this threshold the SET RRC flow UCALLSHOCKCTR control will be WRFDL(Optional) triggered. 040100
BSC6900
If the cell downlink load is lower than this threshold, the algorithm will increase the pilot transmit power of the cell so as to share load of other cells. This parameter is ADD based on UCELLLDB(Option network WRFDal) planning. 020104 CPU usage threshold for cell update. When the average CPU usage of sliding windows reaches or exceeds the threshold, cell SET update FCCPUTHD(Option control is WRFDal) triggered. 040100 Packet queue usage threshold for cell update. When the average packet queue usage of sliding windows reaches or exceeds the threshold, cell SET update FCMSGQTHD(Opti control is WRFDonal) triggered. 040100
BSC6900
BSC6900
BSC6900
CPU usage threshold for recovery from cell update control. When the average CPU usage of sliding windows is lower than the threshold, cell SET update FCCPUTHD(Option control is WRFDal) stopped. 040100 Packet queue usage threshold for recovery from cell update control. When the average packet queue usage of sliding windows is lower than the threshold, cell update control is stopped. Whether to control cell updates Name of the certificate chain file This parameter identifies whether to configure RAC. If the RNC supports the PS domain, this parameter must be set to REQUIRE.
CELLURART Cell URA update HD restore threshold Cell URA update CELLURASW flow control switch Certificate Chain File Name
BSC6900
BSC6900
CertChain
BSC6900
CfgRacInd
BSC6900
WRFD020605
CfgRacInd
BSC6900
CfgSwitch
BSC6900
This parameter indicates whether RAC is configured. If the RNC supports the ADD PS domain, UCELLSETUP(Man the value of datory) this ADD parameter UCELLQUICKSET must be UP(Mandatory) REQUIRE. Channel configuration strategy switch. 1) CFG_DL_BLI ND_DETECT ION_SWITC H: When the switch is on, the DL blind transport format detection function is used for single SRB and AMR+SRB bearers. Note that the UE is only required to support the blind transport format stipulated in 3GPP 25.212 section 4.3.1. 2) CFG_HSDPA _64QAM_SW SET ITCH: When UCORRMALGOSW the switch is ITCH(Optional) on, 64QAM
WRFD010101
WRFD010615 WRFD01061501 WRFD01061502 WRFD01061503 WRFD01061504 WRFD010683 WRFD010684 WRFD010686 WRFD010687 WRFD011500 WRFD011501 WRFD02060504
CFM
Confirm Password
BSC6900
ADD OP(Mandatory)
Confirm password. The confirm password is required to ensure that a correct password is MRFDentered. 210305
CG
Command Group
BSC6900
MRFD210305
CG
Command Group
BSC6900
ADD OP(Optional)
This parameter is valid only when the operator belongs to the MRFDcustom level. 210305 Name of the command group. You can define the name.
CGN
BSC6900
SET CCGN(Optional)
MRFD210305
BSC6900
This parameter specifies the value of the handover protection timer. If services can be set up on channels based on a higher technique after channel handover is completed, the handover protection timer will be started. When the timer expires, the RNC will try to carry services on channels based on a higher technique. Channel retry cannot be SET performed UCOIFTIMER(Optio before this nal) timer expires.
WRFD01061403 WRFD01061404 WRFD010636 WRFD010652 WRFD010683 WRFD010684 WRFD010685 WRFD010686 WRFD010687 WRFD021101 WRFD021200
BSC6900
This parameter specifies the value of the channel retry timer. The timer will start after traffic is set up or reconfigured, if higher technique is available. Channel retry will be SET performed UCOIFTIMER(Optio after this nal) timer expires.
WRFD01061008 WRFD01061112 WRFD01061206 WRFD01061403 WRFD010630 WRFD010632 WRFD010636 WRFD010652 WRFD010683 WRFD010684 WRFD010685 WRFD010686 WRFD010687 WRFD021101
BSC6900
ADD UFACH(Optional)
The coding type of a transport channel.For detailed information of this parameter, refer to 3GPP WRFDTS 25.212. 021000
BSC6900
ADD IPPATH(Optional)
Number of ping check timeouts. The parameter indicates the number of timeout record WRFDfailures. 050402
ChIdx
Channel Index
BSC6900
MBMS SET performance UMBMSPERF(Man channel WRFDdatory) index. 010665 Detection index. The index is a unique value ranging from 0 to 511 if it is WRFDnot specified. 050421
CHKN
Check Index
BSC6900
CHKN
Check Index
BSC6900
None
CHKSUMRX
BSC6900
WRFD050402
CHKSUMTX
BSC6900
Whether to perform ADD checksum SCTPLNK(Optional when sending WRFD) message 050402
BSC6900
Checksum arithmetic type. According to the RFC4960, the ALDER32 algorithm is not applicable to the SCTP checksum. The CRC32 ADD is SCTPLNK(Optional recommende WRFD) d. 050402 Type of the detection that is performed between the STR BSC and the WRFDIPCHK(Mandatory) gateway. 050421 If you set this parameter to TEN_MSEC, use [DL basic meas rprt cycle,Unit:10 ms] to specify the measurement report period. If you set this parameter to MIN, use [DL basic meas rprt cycle,Unit:min ] to specify measurement report period. For detailed SET information of ULDM(Optional) this SET parameter, USATLDM(Optional refer to 3GPP WRFD) TS 25.433. 020102
CHKTYPE
Check type
BSC6900
ChoiceRprtUni Time unit for DL tForDlBasicM basic meas rprt eas cycle
BSC6900
BSC6900
If you set this parameter to TEN_MSEC, use [DL OLC meas rprt cycle,Unit:10 ms] to specify the measurement report period. If you set this parameter to MIN, use [DL OLC meas rprt cycle,Unit:min ] to specify measurement report period. For detailed SET information of ULDM(Optional) this SET parameter, USATLDM(Optional refer to 3GPP WRFD) TS 25.433. 020102
ChoiceRprtUni Time unit of HSDPA tForHsdpaPwr need pwr meas Meas cycle BSC6900
If you set this parameter to TEN_MSEC, use [HSDPA need pwr meas cycle,Unit:10 ms] to specify the measurement report period. If you set this parameter to MIN, use [HSDPA need pwr meas cycle,Unit:min ] to specify measurement report period. For detailed SET information of ULDM(Optional) this SET parameter, USATLDM(Optional refer to 3GPP WRFD) TS 25.433. 020102
ChoiceRprtUni tForHsdpaRat Time unit of HSDPA eMeas bit rate meas cycle BSC6900
If you set this parameter to TEN_MSEC, use [HSDPA bit rate meas cycle,Unit:10 ms] to specify the measurement report period. If you set this parameter to MIN, use [HSDPA bit rate meas cycle,Unit:min ] to specify measurement report period. For detailed SET information of ULDM(Optional) this SET parameter, USATLDM(Optional refer to 3GPP WRFD) TS 25.433. 020102
ChoiceRprtUni tForHsupaRat Time unit of HSUPA eMeas bit rate meas cycle BSC6900
SET ULDM(Optional)
If you set this parameter to TEN_MSEC, use [HSDPA bit rate meas cycle,Unit:10 ms] to specify the measurement report period. If you set this parameter to MIN, use [HSDPA bit rate meas cycle,Unit:min ] to specify measurement report period. For detailed information of this parameter, refer to 3GPP WRFDTS 25.433. 020102
ChoiceRprtUni Time unit for UL tForUlBasicM basic meas rprt eas cycle
BSC6900
Value range: TEN_MSEC, MIN Physical value range: 10 milliseconds, 1 minute Content: If you set this parameter to TEN_MSEC, use [UL basic meas rprt cycle,Unit:10 ms] to specify the measurement report period. If you set this parameter to MIN, use [UL basic meas rprt cycle,Unit:min ] to specify measurement report period. For detailed information of SET this ULDM(Optional) parameter, SET refer to 3GPP USATLDM(Optional TS 25.433. WRFD) Recommende 020102
BSC6900
If you set this parameter to TEN_MSEC, use [UL OLC meas rprt cycle,Unit:10 ms] to specify the measurement report period. If you set this parameter to MIN, use [UL OLC meas rprt cycle,Unit:min ] to specify measurement report period. For detailed SET information of ULDM(Optional) this SET parameter, USATLDM(Optional refer to 3GPP WRFD) TS 25.433. 020102 This parameter specifies the reporting period of the event E of the ADD AMR service. UCELLQUALITYM The unit of EAS(Optional) the reporting SET period can be UQUALITYMEAS(O 10 ms or ptional) minute. This parameter specifies the reporting period of the event E of the ADD BE service. UCELLQUALITYM The unit of EAS(Optional) the reporting SET period can be UQUALITYMEAS(O 10 ms or ptional) minute.
BSC6900
WRFD020701 WRFD020309
BSC6900
WRFD021101 WRFD020309
BSC6900
This parameter specifies the reporting period of the event F of the ADD BE service. UCELLQUALITYM The unit of EAS(Optional) the reporting SET period can be UQUALITYMEAS(O 10 ms or ptional) minute.
WRFD021101 WRFD020309
BSC6900
This parameter specifies the reporting period of the event E of the ADD VP service. UCELLQUALITYM The unit of EAS(Optional) the reporting SET period can be UQUALITYMEAS(O 10 ms or WRFDptional) minute. 020304
ChSwitch
Channel Switch
BSC6900
CID
GSM cell ID
BSC6900
This switch determines whether to take statistics of the performance based on the MBMS channel. One MBMS service is defined as a channel for independent SET MBMS UMBMSPERF(Man measurement WRFDdatory) . 010665 ADD UEXT2GCELL(Man Identifying a WRFDdatory) GSM cell. 020303
CIO
The CIO value specified in this parameter cooperates with the neighboring cell oriented CIO. For details about the meaning of this parameter, refer to 3GPP TS 25.331 ADD and the UEXT3GCELL(Opti description of onal) [CIOOffset].
CIO
BSC6900
It is set according to the topographic feature. This parameter is used for the inter-RAT handover decision in combination with the neighboring cell oriented CIO. The larger the sum, the higher the handover priority of the GSM cell. The smaller the sum, the lower the handover priority of the GSM cell. The parameter is generally set to 0. ADD As for the UEXT2GCELL(Opti impact on onal) network
CIO
BSC6900
This parameter works with the offset of neighboring cell-oriented Cell Individual Offset (CIO). It is used for intra- or interfrequency handover decisions. ADD For details, UCELLSETUP(Opti refer to 3GPP onal) TS 25.331.
CIOOffset
BSC6900
Neighboring cell oriented Cell Individual Offset (CIO). Content: This parameter defines the neighboring cell oriented cell individual offset. The set value functions in combination of the cell oriented CIO. Their sum is added to the measurement quantity before the UE evaluated whether an event has occurred. In handover algorithms, ADD this UINTRAFREQNCE parameter is LL(Optional) used for ADD moving the UINTERFREQNCE border of a LL(Optional) cell.
CIOOffset
BSC6900
CIR
Cell individual offset for the GSM cell, which is set according to the topographic feature. This parameter is used for decision making for the inter-RAT handover. The larger the value of the parameter, the higher the handover priority of the GSM cell. The smaller the value of the parameter, the lower the ADD handover U2GNCELL(Option priority of the al) GSM cell. ADD Bandwidth of IPLOGICPORT(Opt the logical ional) port
CLEARTHD
BSC6900
ADD MPGRP(Optional)
None
CLKTYPE
BSC6900
SET CLKTYPE(Mandato Type of the ry) clock board Whether the alarm to be queried is cleared. You can select "cleared" or "uncleared", or both of EXP them. By ALMLOG(Optional) default, both STA of them are ALMLOG(Optional) selected. Indicating whether the Closed loop time adjust ADD mode in the UCELLSETUP(Opti cell is onal) supported.
MRFD210502
CLRFLG
MRFD210304
BSC6900
WRFD022000
CmCap
This parameter specifies the startup direction of compressed mode that the NodeB supports. - UL_ONLY: The NodeB supports activation of compressed mode only in the uplink. - DL_ONLY: The NodeB supports activation of compressed mode only in the downlink. UL_DL_BOT H: The NodeB supports activation of compressed mode in both uplink and downlink.
WRFD020302 WRFD020303
CM type of the cell. The CMCF parameters are configured on the basis of the CM type of the cell. After that, the SET cell can UCMCF(Optional) specify the ADD number of UCELLCMCF(Optio CM nal) sequences.
BSC6900
WRFD020303 WRFD020302
CmcfSwitch
BSC6900
CMCF algorithm switch. 1) CMCF_DL_H LS_SWITCH: When the switch is on, the compressed mode supports DL higher-layer scheduling. 2) CMCF_UL_H LS_SWITCH: When the switch is on, the compressed mode supports UL higher-layer scheduling. 3) CMCF_UL_P RECFG_TOL ERANCE_S WITCH: When the switch is on, SET the UCORRMALGOSW compressed ITCH(Optional) mode of the
WRFD01061006 WRFD01061204 WRFD020302 WRFD020303 WRFD020304 WRFD020305 WRFD020306 WRFD020308 WRFD02030802 WRFD020309 WRFD020310
A timer to RNC wait for the response to common transport channel resources request in the Iur common SET transport USTATETIMER(Op channel WRFDtional) procedure. 010101
CMD
Command Name
BSC6900
Name of the command to be queried. You can select one or more MRFDEXP LOG(Optional) commands. 210305 You can select one or more MRFDcommands. 210305
CMD
Command Name
BSC6900
ADD CCG(Mandatory)
CMDSEQ
Command Sequence
BSC6900
CmpSwitch
Sequence number of the command ADD string of the SUBCMD(Mandator scheduled y) subtask. Compatibility switch. 1) CMP_IU_IMS _PROC_AS_ NORMAL_PS _SWITCH: When the switch is on, the IMS signaling assigned by the CN undergoes compatibility processing as an ordinary PS service. When the switch is not on, no special processing is performed. 2) CMP_IU_SY SHOIN_CMP _IUUP_FIXT O1_SWITCH: When the switch is on, the IUUP version can SET be rolled back UCORRMALGOSW to R99 when ITCH(Optional) complete
None
CN
Cabinet No.
BSC6900
ADD CAB(Mandatory)
MRFD210301
CNDomainId
CN domain ID
BSC6900
WRFD010101 WRFD021101 ADD WRFDUCNDOMAIN(Man 211502 datory) WRFDADD 021311 UCNNODE(Mandat Identifies the WRFDory) type of a CN. 040202 This parameter specifies whether the service is a CS service or PS service. CS_DOMAIN: Circuit Switched domain service PS_DOMAIN: Packet ADD Switched UTYPRABBASIC(M domain WRFDandatory) service 010510 ADD UCELLRLPWR(Ma Identifying the WRFDndatory) type of a CN. 020101 SET UIUTIMERANDNU M(Mandatory) ADD UCNNODE(Mandat ory) ADD UNRIGLBCNIDMA P(Mandatory) ADD UIMSIIDNNSCNID Identifies a MAP(Mandatory) CN node
CNDomainId
CN domain ID
BSC6900
CNDomainId
CN domain ID
BSC6900
CNId
CN node ID
BSC6900
WRFD010101
Status of a CN node. The status needs to be negotiated with the CN and is configured through the MML command. A CN node can be configured with the following status: 1. Normal: This value indicates that the UE can access the CN node normally. 2. Offload: If the UE carries "NullNRI" in the initial direct transmission message, the UE cannot ADD access the UCNNODE(Mandat CN node. If WRFDory) the UE 021306 Resource management mode. When the interface type is IUB, the value can be set to SHARE or EXCLUSIVE. When the interface type is IUR, IUCS, or IUPS, the ADD value can be ADJMAP(Mandator set to SHARE y) only.
WRFD021305 WRFD050424
BSC6900 BSC6900
MRFD210403 None
ADD UCNOPERATOR(M Cn operator andatory) name. ADD UCNOPERGROUP (Mandatory) ADD UCELLSETUP(Man datory) ADD Identifies an UCELLQUICKSET operator UP(Mandatory) group. This parameter specifies the index of the operator ADD group that UEXT3GCELL(Man serves the datory) cell. ADD Indicating a UEXT2GCELL(Man Cn Operator datory) Group.
WRFD021304 WRFD021311
WRFD021311
WRFD021311 WRFD02130401
BSC6900
CnOpIndex
Cn Operator Index
BSC6900
ADD UCELLCBSSAC(M andatory) SET UIUTIMERANDNU M(Mandatory) ADD UCNNODE(Mandat ory) ADD UNRIGLBCNIDMA P(Mandatory) ADD UIMSIIDNNSCNID MAP(Mandatory) ADD UCNOPERATOR(M andatory) ADD URNCCBCPUID(M andatory) SET UOPERATORCFG PARA(Mandatory) ADD UCZ(Mandatory) ADD UCBSADDR(Mand atory) ADD UCELLMBMSSA(M andatory) ADD UCNOPALLCELLB Indicates a LK(Mandatory) CN operator.
WRFD021304 WRFD021311
CnOpIndex
Cn Operator Index
BSC6900
CnOpIndex
CN Operator index
BSC6900
Specifies the index of the telecom WRFDoperator. 020114 WRFD021305 WRFD050405 WRFD050408
BSC6900
CnOpIndex1
Operator 1 Index
BSC6900
CnOpIndex2
Operator 2 Index
BSC6900
CnOpIndex3
Operator 3 Index
BSC6900
CnOpIndex4
Operator 4 Index
BSC6900
BSC6900
WRFD021311
CnOpNum
Operator Number
BSC6900
CNProtclVer
Protocol ADD version UCNNODE(Mandat supported by WRFDory) the CN. 010101 Number of returned alarm records. By default, all records can EXP be returned in MRFDALMLOG(Optional) each query. 210304 Maximum number of SET records LOGLIMIT(Optional allowed in the MRFD) operation log 210305
CNT
Records to Return
BSC6900
CNTL
Counts Limit
BSC6900
CNTRISTHR D
BSC6900
Assume that this threshold is not 0. When the accumulated number of alarm blink times exceeds the threshold, the alarm is reported. For querying the alarm blink measurement period, see "LST ALMBLKSW". For setting the alarm blink measurement SET period, see ALMBLKPARA(Opti "SET MRFDonal) ALMBLKSW". 210304
BSC6900
Assume that this threshold is not 0. When the number of alarm blink times is smaller than the threshold, the alarm is reported. For querying the alarm blink measurement period, see "LST ALMBLKSW". For setting the alarm blink measurement SET period, see ALMBLKPARA(Opti "SET MRFDonal) ALMBLKSW". 210304
Code reshuffle switch based on H. If the switch is enabled, code occupied by the R99 service is adjusted toward codes with small numbers. When [Allocate Code Mode] is set to Automatic, code can be used by HSDPA increases and HSDPA throughput is improved.To enlarge the throughout of HSDPA when the NodeB automatic code algorithm is ADD enabled, it's UCELLHSDPA(Opti recommende WRFDonal) d that the 01061005
CodeAdjForH User Number for sdpaUserNum Code Adjust for Thd HSDPA
BSC6900
H-based code tree reshuffle user number threshold. When the switch is enabled, if the number of users on the tree to be reshuffled is no greater than this parameter, the reshuffle is allowed. Otherwise, the reshuffle is given up. This parameter limits the number of users involved in one reshuffle so that reshuffle on ADD lots of users UCELLHSDPA(Opti at a time is WRFDonal) avoided. 01061005
CodeBalancin Code occupied rate gDrdCodeRat threshold for code eThd balancing drd[%] BSC6900
This parameter specifies one of the triggering conditions of code balancing DRD. (The other condition is the minimum spreading factor.) This condition refers to that the code occupancy in the best cell is not lower ADD than the value UCELLDRD(Option of this WRFDal) parameter. 020400 This parameter specifies one of the triggering conditions of code balancing DRD. (The other condition is the minimum spreading factor.) This condition refers to that the code occupancy in the best cell is not lower than the value of this WRFDparameter. 020400
CodeBalancin Code occupied rate gDrdCodeRat threshold for code eThd balance drd[%] BSC6900
SET UDRD(Optional)
BSC6900
This parameter specifies one of the triggering conditions of code balancing DRD. (The other condition is the code occupancy.) This condition refers to that the minimum spreading factor of the best cell is not smaller ADD than the value UCELLDRD(Option of this WRFDal) parameter. 020400 This parameter specifies one of the triggering conditions of code balancing DRD. (The other condition is the code occupancy.) This condition refers to that the minimum spreading factor of the best cell is not smaller than the value of this WRFDparameter. 020400
BSC6900
SET UDRD(Optional)
This parameter specifies whether the code balancing DRD algorithm will be applied. - ON: The code balancing DRD algorithm will be applied. - OFF: The code balancing DRD algorithm will not be applied.The DR_RAB_SIN G_DRD_SWI TCH in SET UCORRMAL GOSWITCH should be enable.If it is combination service,the DR_RAB_CO ADD MB_DRD_S UCELLDRD(Option WITCH WRFDal) should be 020400
BSC6900
SET UDRD(Optional)
This parameter specifies whether the code balancing DRD algorithm will be applied. - ON: The code balancing DRD algorithm will be applied. - OFF: The code balancing DRD algorithm will not be applied.The DR_RAB_SIN G_DRD_SWI TCH in SET UCORRMAL GOSWITCH should be enable.If it is combination service,the DR_RAB_CO MB_DRD_S WITCH WRFDshould be 020400
BSC6900
This switch is valid only when the interfrequency handover switch is enabled. TRUE means that interfrequency handover is selected in code resource congestion. FALSE means that interfrequency handover is not selected in code resource congestion. This parameter should be set based on network resource usage. In the case of multiADD frequency UCELLLDR(Option coverage, if WRFDal) code 020106
BSC6900
the message code scheme.the enum value as below: 0000 German 0001 English 0010 Italian 0011 French 0100 Spanish 0101 Dutch 0110 Swedish 0111 Danish 1000 Portuguese 1001 Finnish 1010 Norwegian 1011 Greek 1100 Turkish 1101 Hungarian 1110 Polish SET 1111 URNCCBPARA(Opt Language WRFDional) unspecified 011001 The coding rate of a transport channel. For detailed information of this parameter, refer to 3GPP WRFDTS 25.212. 021000
CodingRate
Coding rate
BSC6900
ADD UFACH(Optional)
BSC6900
Type of event 2D/2F measurement thresholds when interfrequency and inter-RAT measurement s coexist. COEXIST_M EAS_THD_C HOICE_INTE RFREQ: choosing the interfrequency oriented parameters as event 2D/2F measurement thresholds for interfrequency measurement . COEXIST_M EAS_THD_C HOICE_INTE SET RRAT: UHOCOMM(Option choosing the al) inter-RAT ADD oriented UCELLHOCOMM( parameters Optional) as event
WRFD020302 WRFD020303
For a PTM service, if the ratio of the intrafrequency cells where the service is transmitted in PTM mode to the intrafrequency cells of a cell reaches the percentage specified by this parameter, the cell has gains in combining. Then, the power of the FACH carrying the service in the cell SET decreases by URNCMBMSPARA( "SoftCombPw WRFDOptional) rOffset". 01061604 The relative power margin of combined traffics, used to calculate the triggering threshold of event F, can avoid the fluctuation of traffic rate in case the ADD power UCELLDCCC(Optio becomes nal) restricted SET after rate is WRFDUDCCC(Optional) increased. 021101
BSC6900
BSC6900
This parameter defines the period of the SET measurement UMBSCCRRM(Opti reporting from onal) BSC to RNC.
This parameter determines whether Common PLMN ID is used when the RNC SET sends the UOPERATORSHA INIT UE RINGMODE(Option MESSAGE to WRFDal) the CN. 021311
Complicacy
Password Complexity
BSC6900
SET PWDPOLICY(Optio Complexity of MRFDnal) the password 210305 This parameter specifies the interval between the initial alignment failure and ADD the next initial WRFDSAALLNK(Optional) alignment. 050301 This parameter specifies the period of time required by a specific ADD SSCF to WRFDSAALLNK(Optional) assign a link. 050301
COMTMR1
Timer T1
BSC6900
COMTMR2
Timer T2
BSC6900
COMTMR3
Timer T3
BSC6900
This parameter specifies the interval between two consecutive packets sent by the SSCF for verification at the link ADD verification WRFDSAALLNK(Optional) stage. 050301 If the duration for buffering the data in queue 0 is less than or equals to the value of this parameter, flow control is canceled. For the flow control adopting the ATM, this parameter indicates the recovery threshold for ADD congestion in PORTFLOWCTRL the CBR MRFDPARA(Optional) queue. 211503
BSC6900
BSC6900
If the duration for buffering the data in queue 1 is less than or equals to the value of this parameter, flow control is canceled. For the flow control adopting the ATM, this parameter indicates the recovery threshold for ADD congestion in PORTFLOWCTRL the RTVBR MRFDPARA(Optional) queue. 211503 If the duration for buffering the data in queue 2 is less than or equals to the value of this parameter, flow control is canceled. For the flow control adopting the ATM, this parameter indicates the recovery threshold for ADD congestion in PORTFLOWCTRL the NRTVBR MRFDPARA(Optional) queue. 211503
BSC6900
BSC6900
If the duration for buffering the data in queue 3 is less than or equals to the value of this parameter, flow control is canceled. For the flow control adopting the ATM, this parameter indicates the recovery threshold for ADD congestion in PORTFLOWCTRL the UBR MRFDPARA(Optional) queue. 211503 If the duration for buffering the data in queue 4 is less than or equals to the value of this parameter, flow control is canceled. For the flow control adopting the ATM, this parameter indicates the recovery threshold for ADD congestion in PORTFLOWCTRL the UBR+ MRFDPARA(Optional) queue. 211503
BSC6900
BSC6900
If the duration for buffering the data in queue 5 is less than or equals to the value of this ADD parameter, PORTFLOWCTRL flow control is MRFDPARA(Optional) canceled. 211503 If the duration for buffering the data in queue 0 is more than or equals to the value of this parameter, flow control is triggered. For the flow control adopting the ATM, this parameter indicates the threshold for ADD congestion in PORTFLOWCTRL the CBR MRFDPARA(Optional) queue. 211503
CONGTHD0
BSC6900
CONGTHD1
BSC6900
If the duration for buffering the data in queue 1 is more than or equals to the value of this parameter, flow control is triggered. For the flow control adopting the ATM, this parameter indicates the threshold for ADD congestion in PORTFLOWCTRL the RTVBR MRFDPARA(Optional) queue. 211503 If the duration for buffering the data in queue 2 is more than or equals to the value of this parameter, flow control is triggered. For the flow control adopting the ATM, this parameter indicates the threshold for ADD congestion in PORTFLOWCTRL the NRTVBR MRFDPARA(Optional) queue. 211503
CONGTHD2
BSC6900
CONGTHD3
BSC6900
If the duration for buffering the data in queue 3 is more than or equals to or equals to the value of this parameter, flow control is triggered. For the flow control adopting the ATM, this parameter indicates the threshold for ADD congestion in PORTFLOWCTRL the UBR MRFDPARA(Optional) queue. 211503 If the duration for buffering the data in queue 4 is more than or equals to the value of this parameter, flow control is triggered. For the flow control adopting the ATM, this parameter indicates the threshold for ADD congestion in PORTFLOWCTRL the UBR+ MRFDPARA(Optional) queue. 211503
CONGTHD4
BSC6900
CONGTHD5
BSC6900
If the duration for buffering the data in queue 5 is more than or equals to the value of this ADD parameter, PORTFLOWCTRL flow control is MRFDPARA(Optional) triggered. 211503
Indicating whether the UE in connected mode is allowed to access the cell. When the cell status is BARRED, it indicates that the UEs in connected mode are barred to select/reselec t the cell even in the case of emergency calls. For detailed information of this ADD parameter, UCELLACCESSST refer to 3GPP WRFDRICT(Mandatory) TS 25.331. 021103
SET UDRD(Optional)
This parameter specifies the RRC redirection strategy. It is valid only when the DR_RRC_DR D_SWITCH is set to ON. - OFF: RRC redirection is not allowed. Only_To_Inte r_Frequency: Only RRC redirection to interfrequency cells is allowed. Allowed_To_I nter_RAT: Both RRC redirection to interfrequency cells and redirection to inter-RAT cells are allowed.
WRFD020120 WRFD02040003
BSC6900
Indicating whether the UE in idle mode is allowed to reselect another intrafrequency cell. This parameter is valid when [Cell barred indicator for SIB4] is BARRED. If this parameter is ALLOWED, the UE in connected mode can select another intrafrequency cell when the cell selection/rese lection condition is satisfied. If this parameter is NOT_ALLOW ADD ED, the UE in UCELLACCESSST idle mod WRFDRICT(Optional) cannot select 021103 Whether to connect the ADD power SUBRACK(Optional monitoring ) board
CONNPWR
BSC6900
MRFD210301
The hysteresis value of the serving FDD cells in connected mode in case the quality measurement for cell selection and reselection is set to CPICH RSCP. It is related to the slow fading feature of the area where the cell is located. The greater the slow fading variance is, the greater this parameter. According to the R regulation, the current serving cell involves in ADD cell selection UCELLSELRESEL( after the Optional) measurement
The hysteresis value of the serving FDD cells in connected mode in case the quality measurement for cell selection and reselection is set to CPICH Ec/No. It is related to the slow fading feature of the area where the cell is located. The greater the slow fading variance is, the greater this parameter. This parameter is not configured when its value is 255. ADD According to UCELLSELRESEL( the R Optional) regulation,
Offset of cell CPICH RSCP measurement value in cell selection or reselection when the UE is in connected mode. This parameter is used for cell offset in cell selection and reselection. During cell reselection, the cell offset correspondin g to CPICH Ec/No is QOffset2sn, that to CPICH RSCP is QOffset1sn. Idle is used for idle mode, and Conn for ADD connected UINTRAFREQNCE mode. LL(Optional) ConnQoffset1 ADD sn and UINTERFREQNCE ConnQoffset2 LL(Optional) sn are valid
WRFD010801 WRFD010802
Offset of cell CPICH Ec/No measurement value in cell selection or reselection when the UE is in connected mode. This parameter is used for cell offset in cell selection and reselection. During cell reselection, the cell offset correspondin g to CPICH Ec/No is QOffset2sn, that to CPICH RSCP is QOffset1sn. Idle is used for idle mode, and Conn for ADD connected UINTRAFREQNCE mode. LL(Optional) ConnQoffset1 ADD sn and UINTERFREQNCE ConnQoffset2 LL(Optional) sn are valid
WRFD010801 WRFD010802
Inter-freq cell reselection ConnSinterse threshold for arch connect mode[2dB] BSC6900
Threshold for interfrequency cell reselection in connected mode. When the quality (CPICH Ec/No measured by UE) of the serving cell is lower than this threshold plus the [Qqualmin] of the cell, the interfrequency cell reselection procedure will be started. This parameter is not configured when its value is 127. The intrafrequency cell reselection has a priority ADD higher than UCELLSELRESEL( the interOptional) frequency cell
WRFD010801 WRFD020110
Intra-freq cell reselection ConnSintrase threshold for arch connect mode[2dB] BSC6900
Threshold for intrafrequency cell reselection in connected mode. When the quality (CPICH Ec/No measured by the UE) of the serving cell is lower than this threshold plus the [Qqualmin] of the cell, the intrafrequency cell reselection procedure will be started. This parameter is not configured when its value is 127. The intrafrequency cell reselection has a priority ADD higher than UCELLSELRESEL( the interOptional) frequency cell
WRFD010801 WRFD020110
BSC6900
This parameter is valid when [Cell barred indicator for SIB4] is BARRED. It indicates that the delay of the cell can be measured next time when [Cell barred indicator for SIB4] is set to BARRED. The time barred can be increased or reduced in network planning based on the actual time the cell is barred. For detailed information of this ADD parameter, UCELLACCESSST refer to 3GPP WRFDRICT(Optional) TS 25.331. 021103 Type of the connection between the NE and EMS or LMT. The connection can be a plain connection or SET SSL CONNTYPE(Manda encryption MRFDtory) connection. 210305
CONNTYPE
Connection Type
BSC6900
It is used to calculate the transmit power of the first preamble in the random access process. The formula is as follows: Preamble_Init ial_Power = Primary CPICH DL TX powerCPICH_RSC P + UL interference + Constant Value. Where, Preamble_Init ial_Power is the preamble initial TX power, Primary CPICH DL TX power is the downlink transmit (TX) power of ADD PCPICH, UPRACHBASIC(Op CPICH_RSC WRFDtional) P is the 020501
CONTPING
PING IP(Optional)
Whether to perform the PING operation continuously. When the continuous PING operation is performed, the system sends the PING packets to the specified IP address. You can stop the PING operation by using CTRL + MRFDQ. 211503
This parameter specifies the DL MBR of SET conversation UUSERMBR(Optio for DRNC WRFDnal) HSPA User. 050424 This parameter specifies the UL MBR of SET conversation UUSERMBR(Optio for DRNC WRFDnal) HSPA User. 050424
CONVGBR
BSC6900
The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_FACH state, this parameter determines the guaranteed speed of the MAC-c flow that sends conversationa ADD l service data UCELLEFACH(Opti on the Iub WRFDonal) interface. 010688 The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_FACH state, this parameter determines the maximum speed of the MAC-c flow that sends conversationa ADD l service data UCELLEFACH(Opti on the Iub WRFDonal) interface. 010688
CONVMBR
BSC6900
Max Mode Of CopperMaxM Narrowband AMRC ode For Copper Users BSC6900
Maximum rate of the narrowband AMR speech service for WRFDcopper users. 020701
BSC6900
Maximum rate of the wideband AMR speech service for copper users.
WRFD010613 WRFD020701
Count
BSC6900
PING MAC(Optional)
Transmitted packets
MRFD211503
BSC6900
WRFD011402
BSC6900
SET UCNTCHK(Optional Counter WRFD) check switch. 011402 This parameter indicates whether the cell supports ADD CP1 mode UEXT3GCELL(Opti transmit onal) diversity. This parameter indicates whether the closed loop ADD TX diversity UCELLSETUP(Man mode 1 datory) supported.
CP1SupInd
BSC6900
WRFD020203
CP1SupInd
BSC6900
WRFD022000
BSC6900
CPU usage threshold for call paging control. When the average CPU usage of sliding windows reaches or exceeds the threshold, call SET paging flow FCCPUTHD(Option control is WRFDal) triggered. 040100 CPU usage threshold for recovery from call paging control. When the average CPU usage of smooth windows is lower than the threshold, call SET paging flow FCCPUTHD(Option control is WRFDal) stopped. 040100
BSC6900
BSC6900
The threshold used by CPUS process system. When the equivalent user number of this CPUS system is over this threshold, latter calls will be transferred to other CPUS process system until equivalent user number is bellow this CPUS traffic share WRFDthreshold. 040100
CqiDtxTimer
BSC6900
This parameter specifies the number of subframes transmitted when the priority of reporting CQI is higher than the priority of transmitting patterns on the UL DPCCH in DTX mode after one HSDSCH reception. For details, refer SET to the 3GPP UDTXDRXPARA(O TS 25.214 WRFDptional) protocol. 010686
CQIFbCkinIn CQI Feedback DTXDRXmod Cycke in DTX-DRX e mode[ms] BSC6900 Certificate Revocation List File Name BSC6900
This parameter specifies the CQI feedback cycle in DTXDRX mode. Currently, the value of this parameter can be set to only D2 because the NodeB supports only D2. For details, refer SET to the 3GPP UDTXDRXPARA(O TS 25.214 WRFDptional) protocol. 010686 Name of the SET certificate CERTFILE(Mandat revocation list MRFDory) file 210305 Whether to enable the certificate revocation list DISABLE: indicating that the certificate revocation list is disabled ENABLE: indicating that SET the certificate CERTFILE(Optional revocation list MRFD) is enabled 210305
CRL
CRMaxNum
BSC6900
Maximum number of cell reselection. This parameter, along with the [Time for evaluating max cell reselection], is used for rate evaluation in HCS. For ADD details, refer UCELLHCS(Option to 3GPP TS al) 25.304. The field indicates whether the cross-connect path is available. When the cross-path is available, a maximum of four IP paths exists. The four IP paths are the IP path between the first local IP address and the first peer IP address, the IP path between the first local IP address and the second peer IP address, the IP path between the second local IP address and the first ADD peer IP SCTPLNK(Optional address, and ) the IP path
WRFD021200
WRFD050403 WRFD050404
CRRCCONN CCPUTHD
BSC6900
CPU usage threshold for call RRC connection load sharing. When the CPU usage reaches or exceeds the threshold, call RRC SET connection SHARETHD(Option load sharing MRFDal) is triggered. 210101 Packet usage control threshold for call RRC connection load sharing. When the packet queue usage reaches or exceeds the threshold, call RRC SET connection SHARETHD(Option load sharing MRFDal) is triggered. 210101 CPU usage threshold for recovery from RRC connection load sharing. When the CPU usage is lower than the threshold, call RRC SET connection SHARETHD(Option load sharing MRFDal) is stopped. 210101
CRRCCONN CMSGTHD
BSC6900
CRRCCONN RCPUTHD
BSC6900
CRRCCONN RMSGTHD
BSC6900
Packet queue usage threshold for recovery from RRC connection load sharing. When the packet queue usage is lower than the threshold, call RRC SET connection SHARETHD(Option load sharing MRFDal) is stopped. 210101
CSCONVDL
BSC6900
WCDMA R99 CS conversationa ADD l service TRMFACTOR(Opti downlink WRFDonal) factor 050406
BSC6900
R99 CS conversationa ADD l service WRFDTRMMAP(Optional) primary path 050406 R99 CS conversationa l primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the CS ADD conversationa WRFDLOADEQ(Optional) l service. 050404
BSC6900
R99 CS conversationa l service ADD secondary WRFDTRMMAP(Optional) path 050406 R99 CS conversationa l primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the CS ADD conversationa WRFDLOADEQ(Optional) l service. 050404
R99 CS conversational pri CSCONVSEC sec path load ratio WHT threshold
BSC6900
CSCONVUL
CsErlang
WCDMA R99 CS ADD conversationa TRMFACTOR(Opti l service onal) uplink factor Number of Erlangs for SET voice LICENSE(Optional) services
WRFD050406 MRFD210403
BSC6900
CS domain Relocation GSM load THD. This parameter specifies the CS domain relocation GSM load threshold. When the GSM load policy is used, that is, when [NcovHoOn2 GldInd] in SET INTERRATH ONCOV is set to ON, the CS domain inter-system relocation out process will be stopped if the GSM system send its cell load to SET the RNC and UINTERRATHONC the cell load OV(Optional) exceeds the ADD CS domain UCELLINTERRATH Reloc GSM ONCOV(Optional) load THD.
BSC6900
Indicating whether the CS domain permits the SET CN UOPERATORCFG information to WRFDPARA(Optional) update . 021306
BSC6900
WRFD021306
This parameter specifies feature mode of operators in the CS domain. You should configure the network resource identifier (NRI) when SET MOCN or IuUOPERATORCFG Flex is PARA(Optional) supported.
WRFD021304 WRFD021311
WRFD021304 WRFD021311
BSC6900
Specifies whether to impose the ADD access UCELLDSACMANU restriction on ALPARA(Mandatory the CS WRFD) domain. 020114 Whether to impose the access restriction on the CS WRFDdomain. 020114
BSC6900
BSC6900
Indicating whether the cell allows CS service interRAT handover. ON: CS service interRAT handover is enabled. OFF: CS service interRAT handover is disabled. Service handover refers to the handover attribute and related parameter configuration on the network side for each service. When a service is established, the related measurement s and interWRFDRAT 020305
CSSTRMDL
BSC6900
WCDMA R99 CS streaming ADD service TRMFACTOR(Opti downlink WRFDonal) factor 050406
BSC6900
WRFD050406
BSC6900
R99 CS streaming primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the CS ADD streaming WRFDLOADEQ(Optional) service. 050404
BSC6900
WRFD050406
R99 CS streaming CSSTRMSEC pri sec path load WHT ratio threshold
BSC6900
R99 CS streaming primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the CS ADD streaming WRFDLOADEQ(Optional) service. 050404
CSSTRMUL
BSC6900
WCDMA R99 ADD CS streaming TRMFACTOR(Opti service uplink WRFDonal) factor 050406
CsSwitch
CS algorithm switch. 1) CS_AMRC_S WITCH: When the switch is on and the AMRC license is activated, the AMR control function is enabled for AMR services. 2) CS_HANDOV ER_TO_UTR AN_DEFAUL T_CFG_SWI TCH: When the switch is on, the default configurations of signaling and RABs, which are stipulated in 3GPP 25.331, are used for SET relocation of UCORRMALGOSW the UE from ITCH(Optional) GSM to
WRFD011600 WRFD020701
BSC6900
This parameter specifies the channel type of CS voice services. - DCH: Both uplink and downlink are preferably carried on DCH. - HSPA: Uplink is preferably carried on EDCH, and downlink is preferably carried on HSDSCH. In particular, both uplink and downlink will be carried on DCH if either uplink cannot be carried on EDCH or downlink SET cannot be UFRCCHLTYPEPA carried on HS- WRFDRA(Optional) DSCH. 010619
BSC6900
SET UFRC(Optional)
This parameter specifies the relative delay for jitter correction of the CS traffic over the downlink HSPA channel. This parameter indicates the maximum CS delay for the traffic transmitted to the UE. For details, see 3GPP TS WRFD25.331. 010619
BSC6900
SET UFRC(Optional)
This parameter specifies the relative delay for jitter correction of the CS traffic over the uplink HSPA channel. The CS data is buffered on the PDCP layer and then sent to the higher layer in packets after CFN plus CSVoiceHspa UlRelDelay. In this way, the CS data can be transmitted over the HSPA channel at regular WRFDintervals. 010619 This parameter specifies the TTI type used for CS services over the uplink HSPA WRFDchannel. 010619
SET UFRC(Optional)
BSC6900
ADD UNRNC(Optional)
Indicates whether the H2D is performed before the relocation procedure when the CS services are carried on the HSPA. If this parameter is set to OFF, the HSPA needs to be switched back to the DCH before the relocation procedure. If this parameter is set to ON, the HSPA need not be switched back to the DCH before the relocation WRFDprocedure. 01061019
CSW
Self-healing switch for the SET Ethernet SLFSLVSW(Option adapter traffic al) monitoring None
CTFC
Uniquely identifying a TFC on the physical channel. The specific parameter value depends on the CTFCSize (2 bits: 0~3, 4 bits: 0~15, 6 bits: 0~63, 8 bits: 0~255, 12 bits: 0~4095, 16 bits: 0~65535, 24 bits: 0~16777215). ADD For detailed UPRACHTFC(Man information of datory) this ADD parameter, USCCPCHTFC(Ma refer to 3GPP WRFDndatory) TS 25.433. 021000 Maximum number of bits of the Calculated Transport Format Combination (CTFC) of Transport ADD Format UPRACHBASIC(Op Combination tional) Set (TFCS).
CTFCSize
BSC6900
WRFD021000
CTFCSize
BSC6900
Calculated TFC (CTFC) length of the Transport Format Combination Set (TFCS) on the SCCPCH. This parameter value is related to the maximum number of Transport Format Combinations (TFCs) on the transport channel. For detailed information of this parameter, refer to 3GPP WRFDTS 25.433. 021000
CTHD
Critical threshold
BSC6900
Critical threshold of CPU usage. When the CPU usage in "Fast judgement window" reaches or exceeds the threshold, all active flow control functions are implemented. Otherwise, the correspondin SET g flow control FCCPUTHD(Option mechanism is WRFDal) used. 040100
CTHD
Critical threshold
BSC6900
Critical threshold of packet queue usage. When the packet queue usage reaches or exceeds the threshold, all active flow SET control FCMSGQTHD(Opti functions are WRFDonal) implemented. 040100 The sharing offset should be added to the target subrack or subsystem. This parameter is used for preferable selection of the homing subrack and homing SET subsystem UCTRLPLNSHARE during call MRFDPARA(Optional) forwarding. 210104
BSC6900
BSC6900
Forwarding threshold of control plane load sharing. When the CPU usage is between the sharing threshold and overload threshold, and call number in each second reaches "SharingOutC APSMidLoad" , new arrival call attempts SET will be shared UCTRLPLNSHARE out to other MRFDPARA(Optional) UMTS CPUS. 210104 Slot number of the MPU Subsystem for the centralized ADD management RSCGRP(Mandator of the y) resources None Configuration rollback control switch that is used to specify whether to support the SET configuration CMCTRLSW(Mand rollback MRFDatory) function 210301
CTRLSLOT
Slot No.
BSC6900
CTRLSW
CXT
Cross type
BSC6900
MRFD211503
CZ
Classified Zone ID
BSC6900
ADD UCZ(Mandatory)
Uniquely identifying a classified zone. The value of Classified Zone ID is denoted by decimal numerals.
WRFD020804
BSC6900
This parameter is used to check whether the UE in the low activity state. If the UE is on DCH channel, the low activity counter increases by 1 every time traffic volume event 4B is reported. If the UE is on FACH channel, the low activity counter increases by 1 if the traffic volume is 0 in SET the traffic UUESTATETRANS volume event WRFD(Optional) 4B report. 010202
BSC6900
Pending time after the traffic volume event 4B for state transition from DCH to FACH is reported. This parameter is used to prevent too many traffic volume SET events 4B UUESTATETRANS being WRFD(Optional) reported. 010202
BSC6900
When the traffic volume is below the 4B threshold and remains so for the period specified by this parameter, the event 4B is reported. This parameter prevents unnecessary traffic volume events that are caused by traffic volume SET instability UUESTATETRANS from being WRFD(Optional) triggered. 010202 This is the data file for upgrading board. The data file names of UPD different JTGCPLD(Mandato boards are ry) different.
DATAFILE
Data file
BSC6900
MRFD210401
DATE DATE
BSC6900 BSC6900
MRFD210305 None
BSC6900
SET UDCCC(Optional)
After the 1A measurement report is received, the rate is reduced to the threshold rate for soft handover and the timer specified by this parameter starts. The DL rate cannot be increased before the WRFDtimer expires. 021101
Period of penalty timer for SHO DcccShoPena failure after down ltyTime rate[s]
BSC6900
This parameter defines the length of penalty timer for SHO failure after rate reduction in the active set. When the rate reduction in the active set is performed which triggers the increase of SHOs in the target cell, if the target cell fails to join the active again, the RNC starts the penalty timer for SHO failure. This parameter defines the length of the penalty timer. Before the SET timer expires, UINTRAFREQHO( the rate Optional) increasing in
WRFD020202 WRFD020203
DcccStg
DCCC Strategy
BSC6900
SET UDCCC(Optional)
Strategy for adjustment of the rate of the PS BE service when the UE is in the CELL_DCH state. RATE_UP_A ND_DOWN_ ON_DCH indicates that the rate over the DCH can be raised or lowered. RATE_UP_O NLY indicates that the rate over the DCH can only be raised. When UE is in low activity state, it is no need to degrade the traffic rate to the threshold for DCCC before state transition to CELL_FACH. WRFDThat means 021101
SET UDCCC(Optional)
Length of the penalty period within which the rate of a BE service cannot be increased even if the 4A measurement report is received. Increase of the BE service rate is triggered by the 4A measurement report.4A report will not be processed until this Penalty Timer WRFDexpires. 021101 This parameter specifies the period of DCH throughput ratio measurement .Macd performs statistic of traffic volume on DCH and reports 4B events which are used for the rate decrease process of BE service set up WRFDon DCH. 021101
BSC6900
SET UDCCC(Optional)
This parameter specifies the number of measurement periods during which no event 4B related to DCH throughput is reported again after such an event 4B is reported. This parameter is set to avoid too many channel reconfiguratio n operations. The larger the value of this parameter, the longer the time from the last reporting of throughputrelated event 4B on DCH to the next ADD reporting, and UTYPRABDCCCM the smaller WRFDC(Optional) the possibility 021101
BSC6900
This parameter specifies the number of measurement periods from the moment when the DCH rate falls below the 4B threshold to the moment when the throughputrelated event 4B on DCH is triggered. This parameter is set to avoid unnecessary reports triggered by DCH throughput fluctuation. The larger the value of this parameter, the longer the required duration of ADD the DCH UTYPRABDCCCM throughput WRFDC(Optional) keeping 021101 This parameter specifies the default operator that RNC chooses in the MOCN cell. The value 255 SET means that UOPERATORSHA no default RINGMODE(Option operator is WRFDal) defined. 021311
DefaultCnOp
BSC6900
SET UFRC(Optional)
This parameter specifies the constant that is used by the RNC to compute the DPCCH_Pow er_Offset which is further used by the UE to calculate the UL DPCCH_Initia l_Power during the open-loop power control. The formulas are as follows: DPCCH_Pow er_Offset = Primary CPICH DL TX power + UL interference + Default Constant Value DPCCH_Initia l_Power = DPCCH_Pow WRFDer_Offset 020501
BSC6900
When the RNC is performing downlink open power control, it evaluates link consumption according to the PCPICH TX power and the PCPICH signal intensity detected in UE access. However, in some cases, the UE may not report the signal intensity. In this situation, the RNC uses this ADD parameter to UCELLCAC(Option evaluate link WRFDal) consumption. 020101
DELAY
BSC6900
ADD IMAGRP(Optional)
Maximum delay difference between links in the same IMA group None
Delay
This parameter specifies the delay time. When the RNC recovers from disaster and starts to operate, it performs rehost policy for the primary SET hosted UPOOLPRIMHOST NodeB after POLICY(Mandatory the specified WRFD) delay time. 040202 WRFD010501 WRFD010502 WRFD010503 WRFD010504 WRFD050104 WRFD010501 WRFD010502 WRFD010503 WRFD010504 WRFD050104
DelayClass
Delay Class
BSC6900
Delay class number. Each delay class number indicates a specified ADD delay time UTYPRABOLPC(M range of Iub andatory) transmission.
DelayClass
Delay Class
BSC6900
Delay class number. Each delay class number indicates a specified ADD delay time UTYPRABRLC(Ma range of Iub ndatory) transmission.
BSC6900
SET UDRD(Optional)
This parameter specifies the threshold of code occupancy offset between the current cell and the target cell when code balancing DRD is applied. Only when the cell code occupancy offset reaches this threshold can a neighboring cell be selected to be a candidate WRFDcell for DRD. 020400
BSC6900
The actual minimum required RX level = the minimum required RX level ([Qrxlevmin]) + the extended minimum required RX ADD level UEXT3GCELL(Man ([DeltaQrxlev WRFDdatory) min]). 010802
BSC6900
Actual minimum required RX level = minimum required RX level + extended minimum required RX level. For details, refer ADD to the 3GPP UCELLSELRESEL( TS 25.331 Mandatory) 10.3.2.3. ADD M3DE(Mandatory) ADD M3RT(Mandatory) ADD M3LKS(Mandatory) The destination entity number uniquely identifies a destination entity. Description of the operator account
WRFD010801
DENO
BSC6900
WRFD050409 MRFD210305
DESC
Description
BSC6900
ADD OP(Optional)
Description
Description
BSC6900
WRFD021304 WRFD021311
DESTIP
Destination IP address
BSC6900
PING IP(Mandatory)
DESTIP
Destination IP address
BSC6900
TRC IPADDR(Mandatory Destination IP ) address None ADD IPRTBIND(Mandato Destination IP ry) address None PING MAC(Mandatory) TRC MAC(Mandatory) ADD PPPLNK(Mandatory ) ADD MPGRP(Mandatory ) Identifies a maintenance point in the maintenance group None Device IP address of the interface board used by the PPP link.
DESTIP
Destination IP address
BSC6900
DESTMEPID
RMEP ID
BSC6900
DEVIP
None
DEVTYPE
BSC6900
BSC6900
ADD Device IP DEVIP(Mandatory) Address None Whether Type to use the customized port DEFAULTPO RT: indicating that the FTP server uses the default port 21 as a command port and port 20 as a data port to provide FTP services CUSTOMPO RT: indicating that the FTP server uses the customized SET port to FTPSSRV(Mandato provide FTP MRFDry) services 210305
BSC6900
MRFD210502
BSC6900
This parameter indicates the ADD IP Address of DHCPRLY(Mandato DHCP Relay ry) Gateway.
DHCPRLYID
DHCP Relay ID
BSC6900
DINM
Date in Month
BSC6900
Day in the month on which the ADD command SUBTSK(Mandator can be y) executed.
None
DINW
Date in Week
BSC6900
Day in the week on which the ADD command SUBTSK(Mandator can be y) executed. DLD LICENSE(Mandator y) ULD LICENSE(Mandator y)
None
DIR
Directory
BSC6900
The relative path in the working path of the FTP user in the MRFDFTP server 210403
Direction
Direction
BSC6900
This parameter specifies the direction that the traffic volume measurement is applicable to. DOWNLINK: indicates downlink traffic volume measurement . - UPLINK: indicates uplink traffic volume measurement or E-DCH ADD throughput UTYPRABDCCCM measurement C(Mandatory) .
WRFD021101 WRFD01061208
DivCtrlField
BSC6900
There are two combination methods for uplink combination of soft handover: one is maximum ratio combination at the NodeB Rake receiver, which gives the highest combination gain; the other is selective combination at the RNC, which gives a relatively smaller combination gain. The default value of the indication switch is MAY, which SET means the UHOCOMM(Option NodeB al) decides
DL activity factor of the R99 AMR conversationa l service. Signals might be discontinuous ly transmitted because of the activation detection of conversationa l service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation time. The activity factors of the same transport SET channel might UADMCTRL(Option be different in WRFDal) UL and DL. 020101
BSC6900
Duration from when the AMR TX power is beyond the threshold Ea or below the threshold Eb to when the event Ea or Eb is triggered. This ADD parameter is UCELLQUALITYM used to avoid EAS(Optional) faulty SET reporting due UQUALITYMEAS(O to instability ptional) of power.
WRFD020701 WRFD020309
DL activity factor of the R99 background service. Signals might be discontinuous ly transmitted because of the activation detection of conversationa l service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation time. The activity factors of the same transport SET channel might UADMCTRL(Option be different in WRFDal) UL and DL. 020101
L3 filtering coefficient. The larger the value of this parameter, the stronger the smoothing effect and the higher the anti-slowfading capability, but the lower the signal change tracing capability. For detailed SET information of ULDM(Optional) this SET parameter, USATLDM(Optional refer to 3GPP WRFD) TS 25.433. 020102 This parameter specifies the DL initial access rate used when HSDPA BE services switch to the DCH.
BSC6900
SET UFRC(Optional)
WRFD010610
BSC6900
This parameter specifies the rate threshold for the decision to set up a PS domain background/i nteractive service on the DCH in the downlink. Only when the DL service rate is higher than or equal to this threshold, or the UL service rate is higher than or equal to the uplink threshold, the service will be set up on DCH. Otherwise, the service is set up on CCH. SET According to UFRCCHLTYPEPA the product WRFDRA(Optional) specifications 010202
BSC6900
This parameter specifies the rate threshold for the decision to set up a PS domain background/i nteractive service on the DCH in the downlink. Only when the DL service rate is higher than or equal to this threshold, or the UL service rate is higher than or equal to the uplink threshold, the service will be set up on DCH. Otherwise, the service is set up on CCH. ADD According to UCELLFRC(Option the product WRFDal) specifications 010202 DL BE traffic Initial bit rate. When DCCC function is enabled, the downlink initial bit rate will be set to this value if the downlink max bit rate is higher than the initial bit WRFDrate. 021101
BSC6900
SET UFRC(Optional)
BSC6900
This parameter specifies the rate threshold for decision to use HSDSCH to carry DL PS domain background/i nteractive services. When the maximum DL service rate is higher than or equal to this threshold, the service will be carried on HSDSCH. WRFDSET Otherwise, it 010610 UFRCCHLTYPEPA will be carried WRFDRA(Optional) on DCH. 01061008 Duration from when the BE TX power is beyond the threshold Ea to when the event Ea is triggered or from when the BE TX power is below the threshold Eb to when the event Eb is triggered. This ADD parameter is UCELLQUALITYM used to avoid EAS(Optional) faulty SET reporting due UQUALITYMEAS(O to instability ptional) of power.
WRFD021101 WRFD020309
Duration within which the measured power being lower than the threshold is allowed for BE service. This parameter is used to avoid faulty reporting due to instability ADD of power. If UCELLQUALITYM the parameter EAS(Optional) is set to A, SET the hysteresis UQUALITYMEAS(O time is A x 10 ptional) ms. SET ULDM(Optional) SET USATLDM(Optional ) Length of smoothing filter window of downlink CAC.
WRFD021101 WRFD020309
WRFD020102
Different admission policies are used for dedicated channel and common channel users. For common channel users, resources instead of separate power admission decision are reserved. For dedicated channel users, according to the current load factor and the characteristic s of the new call, the CAC algorithm predicts the new TX ADD power with UCELLCAC(Option the WRFDal) assumption of 020101
BSC6900
Admission threshold of the total cell downlink power. If the value is too high, too many users will be admitted. However, the throughput of a single user is easy to be limited. If the value is too ADD low, cell UCELLCAC(Option capacity will WRFDal) be wasted. 020101 This parameter specifies the compression method that the NodeB supports in the downlink. - SF/2: SF reduction by two HIGHER_LA YER_SCHDL: higher layer scheduling If both SF/2 and HIGHER_LA YER_SCHDL are selected, the NodeB supports both of the compression methods in the downlink.
DlCmMethod
BSC6900
WRFD020302 WRFD020303
DLCODENO
Reserved DL code No
BSC6900
BSC6900
Number of the DL code to be reserved. For details, refer ADD to the 3GPP URESERVEOVSF( TS 25.213 Mandatory) protocol. The percentage of the conversationa l AMR service threshold to the 100% downlink load. It is applicable to algorithm 1 and algorithm 2. The parameter is used for controlling the AMR service admission. That is, when an AMR service is accessing, the RNC evaluates the measurement value of the downlink load after the service is accessed. If the DL load of a cell is ADD higher than UCELLCAC(Option this threshold al) after the
WRFD020108
WRFD020101
DlConvNonA MRThd
BSC6900
The percentage of the conversationa l non-AMR service threshold to the 100% downlink load. It is applicable to algorithm 1 and algorithm 2. The parameter is used for controlling the non-AMR service admission. That is, when a non-AMR service is accessing, the RNC evaluates the measurement value of the downlink load after the service is accessed. If ADD the DL load of UCELLCAC(Option a cell is WRFDal) higher than 020101
BSC6900
Number of users selected in a DL LDR CS domain interRAT SHOULDBE load handover. The target subscribers of this parameter are the CS domain subscribers. Because the CS domain subscribers are session subscribers in general and they have little impact on load, you can set this parameter to ADD a UCELLLDR(Option comparatively WRFDal) high value. 020106
Number of users selected in a DL LDR CS domain interRAT SHOULDBE load handover. The target subscribers of this parameter are the CS domain subscribers. Because the CS domain subscribers are session subscribers in general and they have little impact on load, you can set this parameter to ADD a UNODEBLDR(Opti comparatively WRFDonal) high value. 020106
Number of users selected in a DL LDR CS domain interRAT SHOULDNO TBE load handover. The target subscribers of this parameter are the CS domain subscribers. Because the CS domain subscribers are session subscribers in general and they have little impact on load, you can set this parameter to ADD a UCELLLDR(Option comparatively WRFDal) high value. 020106
Number of users selected in a DL LDR CS domain interRAT SHOULDNO TBE load handover. The target subscribers of this parameter are the CS domain subscribers. Because the CS domain subscribers are session subscribers in general and they have little impact on load, you can set this parameter to ADD a UNODEBLDR(Opti comparatively WRFDonal) high value. 020106
BSC6900
SET UDCCC(Optional)
For a BE service that has a low maximum rate, the DCCC algorithm is not obviously effective yet it increases algorithm processing. Thus, the traffic-based DCCC algorithm is applied to BE services whose maximum DL rate is greater than the WRFDthreshold. 021101
BSC6900
Maximum DL rate during network planning when coverage of the entire cell is ensured. When the DL TCP is limited, the current rate is reduced to the full coverage rate if the current rate is greater than the full coverage rate. For a BE service that has a low maximum rate, the DCCC algorithm is not obviously effective yet it increases algorithm ADD processing. UCELLDCCC(Optio Thus, the nal) DCCC SET algorithm is WRFDUDCCC(Optional) applied to BE 021101
DlGBR
BSC6900
This parameter specifies the downlink guaranteed bit rate (GBR) of the BE service. GBR is the minimum bit rate that the system can guarantee for the service after it accesses in. The GBR of none BE service is specified by SET the RAB UUSERGBR(Option assignment WRFDal) from the CN. 050424
Some cell resources can be reserved for handover UEs to guarantee handover success rate and improve access priority of handover services. This parameter defines the quantity of downlink code and CE resources reserved for handover. SFOFF refers to that no resources is reserved. SF32 refers to that a code resource with SF = 32 and its correspondin ADD g credit UCELLCAC(Option resource are WRFDal) reserved. 020101
DlHOThd
BSC6900
The percentage of the handover service admission threshold to the 100% downlink load. It is applicable to algorithm 1 and algorithm 2. The parameter is used for controlling the handover admission. That is, when a service is handing over to a cell, the RNC evaluates the measurement value of the downlink load after the service is accessed. If the DL load of a cell is ADD higher than UCELLCAC(Option this threshold WRFDal) after the 020101
Reserved DL power factor for HSUPA user. The higher the value is, the more resources reserved for the HSUPA control channel, which leads to resource waste. If the value is too low, HSUPA ADD user quality UCELLCAC(Option may be WRFDal) impacted. 020101
DlInteractAF
BSC6900
DL activity factor of the R99 interactive service. Signals might be discontinuous ly transmitted because of the activation detection of conversationa l service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation time. The activity factors of the same transport SET channel might UADMCTRL(Option be different in WRFDal) UL and DL. 020101
BSC6900
The UE can be selected to process load handover only when its ADD bandwidth is UCELLLDR(Option less than this WRFDal) threshold. 020106
BSC6900
The interfrequency neighboring cell could be selected as the destination of load handover only when its load remaining space is larger than this threshold. The lower the parameter is, the easier it is to find a qualified target cell for the blind handover. Excessively small value of the parameter, however makes the target cell easily enter the congestion ADD status. The UCELLLDR(Option higher the WRFDal) parameter is, 020106
BSC6900
The mechanism of the LDR is that an action is performed in each [LDR period] and some services are selected based on the action rules to perform this action. This parameter defines the maximum number of RABs selected in executing downlink LDRAMR voice service rate reduction. If the parameter value is too high, the LDR action may fluctuate greatly and over control ADD may occur UCELLLDR(Option (the state of WRFDal) basic 020106 SET ULDM(Optional) SET USATLDM(Optional ) Length of smoothing filter window of downlink LDR.
WRFD020102
BSC6900
Number of RABs selected in a DL LDR BE traffic rate reduction. In the actual system, this parameter can be set on the basis of the actual circumstance s. If the highrate subscribers occupy a high proportion, set the parameter to a comparatively low value. If the high-rate subscribers occupy a low proportion, set the parameter to a comparatively high value. ADD Because the UCELLLDR(Option basic WRFDal) congestion 020106
BSC6900
Number of RABs selected in a DL LDR BE traffic rate reduction. In the actual system, this parameter can be set on the basis of the actual circumstance s. If the highrate subscribers occupy a high proportion, set the parameter to a comparatively low value. If the high-rate subscribers occupy a low proportion, set the parameter to a comparatively high value. ADD Because the UNODEBLDR(Opti basic WRFDonal) congestion 020106
BSC6900
Reserved SF threshold in downlink credit LDR. The downlink credit LDR could be triggered only when the SF factor correspondin g to the downlink reserved credit is higher than the uplink or downlink ADD credit SF UCELLLDR(Option reserved WRFDal) threshold. 020106
BSC6900
Threshold of SF reserved in downlink credit LDR. The downlink credit LDR is triggered when the SF factor correspondin g to the downlink reserved credit is higher than the uplink or downlink credit SF reserved threshold. The lower the parameter value is, the easier the credit enters the congestion status, the easier the LDR action is triggered, and the easier the ADD user UNODEBLDR(Opti experience is WRFDonal) affected. A 020106
BSC6900
This parameter has the same content as DlLdrFirstActi on. The selected actions, ADD however, UCELLLDR(Option should be WRFDal) unique. 020106
This parameter has the same content as DlLdrFirstActi on. The selected actions, ADD however, UCELLLDR(Option should be WRFDal) unique. 020106
This parameter has the same content as DlLdrFirstActi on. The selected actions, ADD however, UNODEBLDR(Opti should be WRFDonal) unique. 020106
NOACT: No load reshuffling action is taken. INTERFREQ LDHO: The interfrequency load handover is performed. BERATERED : Channels are reconfigured for the BE service. QOSRENEG O: The renegotiation on the QoS of the uncontrollable real-time service is performed. CSINTERRA TSHOULDBE LDHO: The inter-RAT SHOULDBE ADD load UCELLLDR(Option handover of WRFDal) the CS 020106
NOACT: No load reshuffling action is taken. BERATERED : Channels are reconfigured for the BE service to reduce rate. QOSRENEG O: The renegotiation on the QoS of the uncontrollable real-time service is performed to reduce service QoS. CSINTERRA TSHOULDBE LDHO: The inter-RAT SHOULDBE load handover of the CS domain is ADD performed. UNODEBLDR(Opti For details, WRFDonal) refer to 3GPP 020106
BSC6900
This parameter has the same content as DlLdrFirstActi on. The selected actions, ADD however, UCELLLDR(Option should be WRFDal) unique. 020106
BSC6900
This parameter has the same content as DlLdrFirstActi on. The selected actions, ADD however, UNODEBLDR(Opti should be WRFDonal) unique. 020106
This parameter has the same content as DlLdrFirstActi on. The selected actions, ADD however, UCELLLDR(Option should be WRFDal) unique. 020106
BSC6900
Number of RABs selected in a DL LDR uncontrolled real-time traffic QoS renegotiation. The target subscribers of this parameter are the PS domain realtime subscribers. The setting of this parameter is analogous to the setting of BE service rate reduction subscriber number. Because the number of subscribers performing QoS renegotiation may be ADD smaller than UCELLLDR(Option the value of WRFDal) this 020106
BSC6900
Number of RABs selected in a DL LDR uncontrolled real-time traffic QoS renegotiation. The target subscribers of this parameter are the PS domain realtime subscribers. The setting of this parameter is analogous to the setting of BE service rate reduction subscriber number. Because the number of subscribers performing QoS renegotiation may be ADD smaller than UNODEBLDR(Opti the value of WRFDonal) this 020106
DlLdrRelThd
BSC6900
If the ratio of DL load of the cell to the downlink capacity is lower than this threshold, the DL load reshuffling function of the cell is stopped. After the basic congestion state of the cell load is released, the system no longer implements the LDR action. Because the load fluctuates, the difference between the LDR release threshold and trigger threshold should be ADD higher than UCELLLDM(Option 10%. The WRFDal) ping-pong 020106
BSC6900
This parameter has the same content as DlLdrFirstActi on. The selected actions, ADD however, UCELLLDR(Option should be WRFDal) unique. 020106
BSC6900
This parameter has the same content as DlLdrFirstActi on. The selected actions, ADD however, UNODEBLDR(Opti should be WRFDonal) unique. 020106
BSC6900
This parameter has the same content as DlLdrFirstActi on. The selected actions, ADD however, UCELLLDR(Option should be WRFDal) unique. 020106
This parameter has the same content as DlLdrFirstActi on. The selected actions, ADD however, UCELLLDR(Option should be WRFDal) unique. 020106
BSC6900
This parameter has the same content as DlLdrFirstActi on. The selected actions, ADD however, UNODEBLDR(Opti should be WRFDonal) unique. 020106
BSC6900
This parameter has the same content as DlLdrFirstActi on. The selected actions, ADD however, UCELLLDR(Option should be WRFDal) unique. 020106
This parameter has the same content as DlLdrFirstActi on. The selected actions, ADD however, UCELLLDR(Option should be WRFDal) unique. 020106
This parameter has the same content as DlLdrFirstActi on. The selected actions, ADD however, UNODEBLDR(Opti should be WRFDonal) unique. 020106
DlLdrTrigThd
BSC6900
If the ratio of DL load of the cell to the downlink capacity is not lower than this threshold, the DL load reshuffling function of the cell is triggered. After the basic congestion state of the cell load is released, the system no longer implements the LDR action. Because the load fluctuates, the difference between the LDR release threshold and trigger threshold ADD should be UCELLLDM(Option higher than WRFDal) 10%. The 020106 If the DL load state of the cell is lasted longer than this threshold, ADD the DL load UCELLLDM(Option state of the WRFDal) cell transfers. 020102
BSC6900
This parameter specifies the maximum number of TFCs (Transport Format Combination) allowed in the downlink. The larger the value of this parameter, the larger the number of available TFCs in the WRFDdownlink. 010510
Reserved DL ADD power factor UCELLCAC(Option for MBMS al) service. Smooth filtering coefficient for DL measured values. The smooth filtering algorithm is used to avoid random interference in measurement reporting. Smoothness ADD is decided by UCELLQUALITYM the filtering EAS(Optional) coefficient of SET the UQUALITYMEAS(O measurement ptional) .
WRFD020101
WRFD021101 WRFD020309
BSC6900
SET UDCCC(Optional)
This parameter determines whether the downlink intermediate rate uses automatic or manual mode when using 3step WRFDadjustment. 021101
BSC6900
Threshold of the DL intermediate rate when the 3-step mode is used for DL rate adjustment and the manual mode is used for DL intermediate SET rate WRFDUDCCC(Mandatory) adjustment. 021101
BSC6900
SET UAMRC(Optional)
The AMRC needs to check whether the TFO/TrFO exists before adjusting DL AMR speech rate. If the TFO/TrFO does not exist, the CN has the associated encoder and the RNC delivers the RATE CONTROL command to the CN and starts the timer. If the TFO/TrFO exists, the CN has no associated encoder and the local RNC delivers to the peer RNC a command requesting the AMR WRFDmode at a 020701
BSC6900
The AMRC needs to check whether the TFO/TrFO exists before adjusting DL wideband AMR speech rate. If the TFO/TrFO does not exist, the CN has the associated encoder and the RNC delivers the RATE CONTROL command to the CN and starts the timer. If the TFO/TrFO exists, the CN has no associated encoder and the local RNC delivers to the peer RNC a SET command UAMRCWB(Option requesting WRFDal) the wideband 020701
BSC6900
DL activity factor of the R99 non AMR conversationa l service. Signals might be discontinuous ly transmitted because of the activation detection of conversationa l service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation time. The activity factors of the same transport SET channel might UADMCTRL(Option be different in WRFDal) UL and DL. 020101 SET ULDM(Optional) SET USATLDM(Optional ) Length of smoothing filter window of downlink OLC.
WRFD020102
BSC6900
DL fast TF restriction refers to a situation where, when the cell is overloaded and congested, the downlink TF can be adjusted to restrict the number of blocks transported in each TTI at the MAC layer and the rate of user data, thus reducing the cell downlink load. The mechanism of the OLC is that an action is performed in each [OLC period] and some ADD services are UCELLOLC(Option selected WRFDal) based on the 020107
BSC6900
DL fast TF restriction refers to a situation where, when the cell is overloaded and congested, the downlink TF can be adjusted to restrict the number of blocks transported in each TTI at the MAC layer and the rate of user data, thus reducing the cell downlink load. The mechanism of the OLC is that an action is performed in each [OLC period] and some ADD services are UCELLOLC(Option selected WRFDal) based on the 020107
L3 filtering coefficient. The larger the value of this parameter, the stronger the smoothing effect and the higher the anti-slowfading capability, but the lower the signal change tracing capability. For detailed SET information of ULDM(Optional) this SET parameter, USATLDM(Optional refer to 3GPP WRFD) TS 25.433. 020102
DlOlcRelThd
BSC6900
If the ratio of DL load of the cell to the downlink capacity is lower than this threshold, the DL overload and congestion control function of the cell is stopped. The value of the OLC release threshold should not be much lower than or close to the OLC trigger threshold, or the system state may have a pingpong effect. The recommende d difference between the OLC release ADD threshold and UCELLLDM(Option the OLC WRFDal) trigger 020107
BSC6900
User release is an extreme method in reducing the cell load and recovering the system when the cell is overloaded and congested. The mechanism of the OLC is that an action is performed in each [OLC period] and some services are selected based on the action rules to perform this action. This parameter defines the maximum number of RABs released in executing ADD downlink OLC UCELLOLC(Option service WRFDal) release. 020107 DL OLC trigger hysteresis.Thi SET s parameter ULDM(Optional) can avoid SET touching off USATLDM(Optional OLC event WRFD) continually. 020102
BSC6900
BSC6900
If the ratio of DL load of the cell to the downlink capacity is not lower than this threshold, the DL overload and congestion control function of the cell is triggered. The value of the OLC release threshold should not be much lower than or close to the OLC trigger threshold, or the system state may have a pingpong effect. The recommende d difference between the ADD OLC release UCELLLDM(Option threshold and WRFDal) the OLC 020107
DlOtherThd
BSC6900
The percentage of other service thresholds to the 100% downlink load. The services refer to other admissions except the conversationa l AMR service, conversationa l non-AMR service, and handover scenarios. It is applicable to algorithm 1 and algorithm 2. The parameter is used for controlling other service admissions. That is, when a service is accessing, the RNC ADD evaluates the UCELLCAC(Option measurement WRFDal) value of the 020101 Orthogonal Variable Spreading Factor (OVSF) of the DL code to be reserved. For details, refer ADD to the 3GPP URESERVEOVSF( TS 25.213 WRFDMandatory) protocol. 020108
DLOVSFSF
BSC6900
BSC6900
Number of users selected in a DL LDR PS domain interRAT SHOULDBE load handover. The target subscribers of this parameter are the PS domain subscribers. In the actual system, this parameter can be set on the basis of the actual circumstance s. If the highrate subscribers occupy a high proportion, set the parameter to a comparatively ADD low value. If UCELLLDR(Option the high-rate WRFDal) subscribers 020106
Number of users selected in a DL LDR PS domain interRAT SHOULDBE load handover. The target subscribers of this parameter are the PS domain subscribers. In the actual system, this parameter can be set on the basis of the actual circumstance s. If the highrate subscribers occupy a high proportion, set the parameter to a comparatively ADD low value. If UNODEBLDR(Opti the high-rate WRFDonal) subscribers 020106
Number of users selected in a DL LDR PS domain interRAT SHOULDNO TBE load handover. The target subscribers of this parameter are the PS domain subscribers. In the actual system, this parameter can be set on the basis of the actual circumstance s. If the highrate subscribers occupy a high proportion, set the parameter to a comparatively ADD low value. If UCELLLDR(Option the high-rate WRFDal) subscribers 020106
Number of users selected in a DL LDR PS domain interRAT SHOULDNO TBE load handover. The target subscribers of this parameter are the PS domain subscribers. In the actual system, this parameter can be set on the basis of the actual circumstance s. If the highrate subscribers occupy a high proportion, set the parameter to a comparatively ADD low value. If UNODEBLDR(Opti the high-rate WRFDonal) subscribers 020106 Rate adjustment switch of link stability control for DL QoS of AMR services. When the parameter is set to YES, DL rate of SET AMR services UQOSACT(Optiona can be WRFDl) adjusted. 020701
BSC6900
BSC6900
Interfrequency handover switch of link stability control for DL QoS of AMR services. When the parameter is set to YES, interfrequency handover can be performed for AMR SET services to UQOSACT(Optiona ensure the l) QoS.
WRFD020701 WRFD020309
Inter-RAT handover switch of link stability control for DL QoS of AMR services. When the parameter is set to YES, inter-RAT handover can be performed for AMR SET services to UQOSACT(Optiona ensure the WRFDl) QoS. 020309
BSC6900
Timer length for downlink Qos measurement . This parameter controls the time lengths for the interfrequency and inter-RAT measurement based on Qos. After interfrequency or inter-RAT measurement starts, if no interfrequency handover is performed when this timer expires, the measurement is stopped, and the SET compressed UQOSHO(Optional) mode is ADD deactivated, if UCELLQOSHO(Opt any. If this ional) parameter is
WRFD020304 WRFD020309
BSC6900
Interfrequency handover switch of link stability control for DL QoS of VP services. When the parameter is set to YES, interfrequency handover can be performed for VP SET services to UQOSACT(Optiona ensure the WRFDl) QoS. 020304 Rate adjustment switch of link stability control for DL QoS of WAMR services. When the parameter is set to YES, DL rate of SET WAMR UQOSACT(Optiona services can WRFDl) be adjusted. 020701
BSC6900
BSC6900
Interfrequency handover switch of link stability control for DL QoS of WAMR services. When the parameter is set to YES, interfrequency handover can be performed for WAMR SET services to UQOSACT(Optiona ensure the l) QoS.
WRFD020701 WRFD020304
Inter-RAT handover switch of link stability control for DL QoS of WAMR services. When the parameter is set to YES, inter-RAT handover can be performed for WAMR SET services to UQOSACT(Optiona ensure the WRFDl) QoS. 020309 When the switch is on, the congestion detection and SET control for DL UDPUCFGDATA(O R99 service WRFDptional) is supported. 020124
BSC6900
SET UDCCC(Optional)
This parameter determines whether the DL rate is lowered to the minimum rate in one step or two steps for BE service set up on DCH in WRFDdownlink. 021101 This parameter determines whether the DL rate is raised to the maximum rate in one step or two steps for BE service set up on DCH in WRFDdownlink. 021101
BSC6900
SET UDCCC(Optional)
BSC6900
Frequency hysteresis of downlink RSCP Qos. This parameter controls the used frequency thresholds for the interfrequency and inter-RAT measurement based on Qos. In event mode, if the interfrequency and inter-RAT measurement events occurred for the downlink Qos reason, the used frequency threshold of the RSCP SET measurement UQOSHO(Optional) quantity is ADD equal to the UCELLQOSHO(Opt used ional) frequency
WRFD020304 WRFD020309
DlSF
This parameter refers to the downlink spreading factor used by the RL carrying single service with the CN domain in typical environment. The downlink transmit power parameters of common services are obtained by emulation, and the value of [Downlink spreading factor] depends on such factors as service rate and puncturing limitation. For detailed ADD information of UCELLRLPWR(Ma this WRFDndatory) parameter, 020108
BSC6900
SET UCMCF(Optional)
This parameter determines whether the compressed mode is limited to the downlink SF. Starting the compressed mode is resource consuming for the fastmoving UEs. Whether the spreading factors of the current DCH channels should be considered when the switch controlling the start compressed mode is set. When the switch is set to FALSE, you can infer that the start compressed mode does
WRFD020302 WRFD020303
DlSFTurnPoin t DL SF threshold
BSC6900
CM implementatio n approach selection basis. When the downlink spreading factor is greater than or equal to this parameter value, the SF/2 approach will be preferred. Otherwise, the high-layer scheduling will be preferred. The SF/2 approach consumes more system resources and therefore this approach is recommende SET d only for lowUCMCF(Optional) rate users. ADD The highUCELLCMCF(Optio layer nal) scheduling
WRFD020303 WRFD020302
DlSrbActFacto r DL AF of SRB
BSC6900
DL activity factor of SRB. Signals might be discontinuous ly transmitted because of the activation detection of conversationa l service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation time. The activity factors of the same transport SET channel might UADMCTRL(Option be different in WRFDal) UL and DL. 020101
DlStreamAF
BSC6900
DL activity factor of the R99 streaming service. Signals might be discontinuous ly transmitted because of the activation detection of conversationa l service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation time. The activity factors of the same transport SET channel might UADMCTRL(Option be different in WRFDal) UL and DL. 020101
This parameter specifies the rate threshold for decision to use HSDSCH to carry DL PS domain streaming services. When the maximum DL service rate is higher than or equal to this threshold, the service will be carried on HSDSCH. WRFDSET Otherwise, it 010610 UFRCCHLTYPEPA will be carried WRFDRA(Optional) on DCH. 010630
DlThdE1
BSC6900
SET UAMRC(Optional)
Threshold E1 of DL AMR speech rate adjustment. Periodical reporting is used for DL measurement . When the value calculated on the basis of the measurement report is higher than the upper threshold E1, AMRC lowers the DL AMR speech rate by one level. This parameter specifies the relative threshold. The absolute threshold is equal to the maximum DL TX power minus the relative WRFDthreshold. 020701
DlThdE1
BSC6900
Threshold E1 of DL wideband AMR speech rate adjustment. Periodical reporting is used for DL measurement . When the value calculated on the basis of the measurement report is higher than the upper threshold E1, AMRC lowers the DL wideband AMR speech rate by one level. This parameter specifies the relative threshold. The absolute threshold is SET equal to the UAMRCWB(Option maximum DL al) TX power
WRFD010613 WRFD020701
DlThdE2
BSC6900
SET UAMRC(Optional)
Threshold E2 of DL AMR speech rate adjustment. Periodical reporting is used for DL measurement . When the value calculated on the basis of the measurement report is lower than the upper threshold E2, AMRC stops adjusting the DL AMR speech rate. This parameter specifies the relative threshold. The absolute threshold is equal to the maximum DL TX power minus the relative WRFDthreshold. 020701
DlThdE2
BSC6900
Threshold E2 of DL wideband AMR speech rate adjustment. Periodical reporting is used for DL measurement . When the value calculated on the basis of the measurement report is lower than the upper threshold E2, AMRC stops adjusting the DL wideband AMR speech rate. This parameter specifies the relative threshold. The absolute threshold is equal to the SET maximum DL UAMRCWB(Option TX power al) minus the
WRFD010613 WRFD020701
DlThdF1
BSC6900
SET UAMRC(Optional)
Threshold F1 of DL AMR speech rate adjustment. Periodical reporting is used for DL measurement . When the value calculated on the basis of the measurement report is lower than the lower threshold F1, AMRC raises the DL AMR speech rate by one level. This parameter specifies the relative threshold. The absolute threshold is equal to the maximum DL TX power minus the relative WRFDthreshold. 020701
DlThdF1
BSC6900
Threshold F1 of DL wideband AMR speech rate adjustment. Periodical reporting is used for DL measurement . When the value calculated on the basis of the measurement report is lower than the lower threshold F1, AMRC raises the DL wideband AMR speech rate by one level. This parameter specifies the relative threshold. The absolute threshold is equal to the SET maximum DL UAMRCWB(Option TX power al) minus the
WRFD010613 WRFD020701
DlThdF2
BSC6900
SET UAMRC(Optional)
Threshold F2 of DL AMR speech rate adjustment. Periodical reporting is used for DL measurement . When the value calculated on the basis of the measurement report is higher than the lower threshold F2, AMRC stops adjusting the DL AMR speech rate. This parameter specifies the relative threshold. The absolute threshold is equal to the maximum DL TX power minus the relative WRFDthreshold. 020701
DlThdF2
BSC6900
Threshold F2 of DL wideband AMR speech rate adjustment. Periodical reporting is used for DL measurement . When the value calculated on the basis of the measurement report is higher than the lower threshold F2, AMRC stops adjusting the DL wideband AMR speech rate. This parameter specifies the relative threshold. The absolute threshold is equal to the SET maximum DL UAMRCWB(Option TX power al) minus the
WRFD010613 WRFD020701
BSC6900
When the algorithm 2 is used, this parameter defines the total equivalent user number correspondin g to the 100% downlink load. The parameter should be related to the admission threshold and ADD actual UCELLCAC(Option condition of WRFDal) the network. 020101 Duration from when the VP TX power is beyond the threshold Ea or below the threshold Eb to when the event Ea or Eb is triggered. This ADD parameter is UCELLQUALITYM used to avoid EAS(Optional) faulty SET reporting due UQUALITYMEAS(O to instability WRFDptional) of power. 020304 ADD Expected IMAGRP(Optional) DELAY depth None ADD UCNOPALLCELLB LK(Mandatory) ADD URNCALLCELLBL K(Mandatory) ADD EMU(Optional) This parameter specifies the blocked domain type. Door status alarm switch
DlVpTrigTime VP Trigger Time Of E Event E[ms] BSC6900 Expected diff delay DLYGB guard-band[cells] BSC6900
Blocked domain DomainType type BSC6900 DOOR_ENGI Enable Door Status NE_MASK Alarm Reporting BSC6900
WRFD020114 MRFD210304
DPC
BSC6900
As an integer, the DSP code can be expressed by a decimal digit or a hexadecimal digit. If the DSP code is expressed by a hexadecimal digit, H' is ADD added before WRFDN7DPC(Mandatory) the number. 050301 This parameter specifies the number of consecutive subframes that can be transmitted on the UL DPCCH during one DtxCycle1. For details, refer to the SET 3GPP TS UDTXDRXPARA(O 25.214 ptional) protocol. This parameter specifies the number of consecutive subframes that can be transmitted on the UL DPCCH during one DtxCycle2. For details, refer to the SET 3GPP TS UDTXDRXPARA(O 25.214 ptional) protocol.
DpcchBurst1
WRFD010686
DpcchBurst2
WRFD010686
BSC6900
SET UFRC(Optional)
This parameter specifies whether the DPCCH slot format 1 or DPCCH slot format 4 is used when all the traffic and signaling are transmitted over the HSPA channel and when the number of feedback information (FBI) bits is 0.
WRFD010610 WRFD010612
DPCDNF
BSC6900
DSP code expressed in the format of ADD segments 8-8- WRFDN7DPC(Mandatory) 8 050301 The indicator shows the preferred transmission diversity mode of ADD DPCH for UEXT3GCELL(Opti MIMO to WRFDonal) choose. 020203 DPCH ADD diversity UCELLSETUP(Man mode for datory) MIMO user. This parameter indicates the preferred transmit ADD diversity UEXT3GCELL(Opti mode of the onal) DPCH.
DPCH with MIMO DpchDivModf priority Tx diversity orMIMO mode DPCH diversity DpchDivModf mode for MIMO orMIMO user
BSC6900
BSC6900
WRFD010684
BSC6900
WRFD020203
BSC6900
DpcMode
BSC6900
This parameter indicates the TX diversity ADD preferably UCELLSETUP(Man selected by datory) DPCH. This parameter specifies the DL power control mode. SINGLE_TPC , a fast power control mode, indicates that a unique TPC command is sent in each timeslot on the DPCCH. TPC_TRIPLE T_IN_SOFT, a slow power control mode, indicates that the same TPC command is sent over three timeslots. It is applicable to soft handover, and it can decrease the power SET deviation. UFRC(Optional) -
WRFD022000
WRFD020504
DPCT
DSP type
BSC6900
DSP type. IUCS: indicates the IU interface CS control plane and user plane signaling point. IUPS: indicates the signaling point of the IU interface PS control signaling plane. IUR: indicates the signaling point of the base station controller that is connected to the RNC. IUCS_ALCAP : indicates the signaling point of the IU interface CS user signaling plane. IUCS_RANA P: indicates ADD the signaling WRFDN7DPC(Mandatory) point of the IU 050301 STR IPLOPTST(Mandat Destination ory) port number STR IPLOPTST(Mandat DPU slot ory) number
DPORTNO
BSC6900
WRFD050304
DPUSN
BSC6900
None
DPX
DSP index
BSC6900
WRFD010101
DPX
DPX Index
BSC6900
This parameter is valid when the node type is set to IUR, IUCS, IUPS, ADD or ADJNODE(Mandat NNI_AAL2S WRFDory) WITCH. 010101 ADD UNRNC(Mandatory) ADD UCNNODE(Mandat ory) ADD UIURGCONN(Man datory)
Dpx
DSP index
BSC6900
WRFD010101
DraSwitch
BSC6900
Dynamic resource allocation switch. 1) DRA_AQM_S WITCH: When the switch is on, the active queue management algorithm is used for the RNC. 2) DRA_BE_ED CH_TTI_REC FG_SWITCH: When the switch is on, the TTI could be reconfigured to HSUPA traffic dynamically between 2ms and 10ms. 3) DRA_BE_RA TE_DOWN_ SET BF_HO_SWI UCORRMALGOSW TCH: When ITCH(Optional) the switch is
BSC6900
This parameter is used as the DRD Ec/No threshold of whether to perform the blind handover. If the Ec/No measured value of the current cell is greater than this parameter of the interfrequency neighboring cell, this neighboring cell can be ADD selected to be UINTERFREQNCE the candidate WRFDLL(Optional) DRD cell. 02040001
BSC6900
This parameter is used as the DRD Ec/No threshold of whether to perform the blind handover. This parameter is used as the DRD Ec/No threshold of whether to perform the blind handover. When choosing a DRD candidate cell, if the Ec/No value of the current cell is greater than the threshold of interRAT/interfrequency ADD neighboring U2GNCELL(Option cell, the DRD WRFDal) is timer permitted. 020400 A to DRNC wait SET for AAL2 USTATETIMER(Op setup tional) indication.
WRFD010101
A timer to DRNC wait for rnsap radio link SET reconfiguratio USTATETIMER(Op n commit WRFDtional) from SRNC. 010101
This parameter specifies the maximum number of inter-RAT RAB directed retries. It decides the size of the candidate set for inter-RAT DRD. The value 0 indicates that inter-RAT RAB DRD is not applicable. This ADD parameter UCELLDRD(Option can be cellWRFDal) oriented. 02040002 This parameter specifies the maximum number of inter-RAT RAB directed retries. It decides the size of the candidate set for inter-RAT DRD. The value 0 indicates that inter-RAT RAB DRD is not applicable. This parameter can be cellWRFDoriented. 02040002
BSC6900
SET UDRD(Optional)
DrncBeDlRlc QosSwitch
If the parameter is set to YES, QoS control for DL BE services based on RLC retransmissio n can be performed SET when the best UQOSACT(Optiona cell is in the l) DRNC.
WRFD021101 WRFD020309
BSC6900
If the duration for buffering the data in queue 0 is more than or equals to the value of this parameter, the subsequent packets added to queue 0 are discarded. For the flow control adopting the ATM, this parameter indicates the threshold for ADD discarding PORTFLOWCTRL packets in the WRFDPARA(Optional) CBR queue. 05030110
BSC6900
If the duration for buffering the data in queue 1 is more than or equals to the value of this parameter, the subsequent packets added to queue 1 are discarded. For the flow control adopting the ATM, this parameter indicates the threshold for discarding ADD packets in the PORTFLOWCTRL RTVBR PARA(Optional) queue. None
BSC6900
If the duration for buffering the data in queue 2 is more than or equals to the value of this parameter, the subsequent packets added to queue 2 are discarded. For the flow control adopting the ATM, this parameter indicates the threshold for discarding ADD packets in the PORTFLOWCTRL NRTVBR MRFDPARA(Optional) queue. 211503
BSC6900
If the duration for buffering the data in queue 3 is more than or equals to the value of this parameter, the subsequent packets added to queue 3 are discarded. For the flow control adopting the ATM, this parameter indicates the threshold for ADD discarding PORTFLOWCTRL packets in the MRFDPARA(Optional) UBR queue. 211503
BSC6900
If the duration for buffering the data in queue 4 is more than or equals to the value of this parameter, the subsequent packets added to queue 4 are discarded. For the flow control adopting the ATM, this parameter indicates the threshold for ADD discarding PORTFLOWCTRL packets in the PARA(Optional) UBR+ queue. None If the duration for buffering the data in queue 5 is more than or equals to the value of this parameter, the subsequent packets ADD added to PORTFLOWCTRL queue 5 are MRFDPARA(Optional) discarded. 211503
BSC6900
DrSwitch
BSC6900
Direct retry switch. 1) DR_RRC_DR D_SWITCH( DRD switch for RRC connection): When the switch is on, DRD and redirection is performed for RRC connection if retry is required. 2) DR_RAB_SIN G_DRD_SWI TCH(DRD switch for single RAB): When the switch is on, DRD is performed for single service if retry is required. 3) DR_RAB_CO SET MB_DRD_S UCORRMALGOSW WITCH(DRD ITCH(Optional) switch for
DrxCycle
DRX Cycle[subframe]
BSC6900
This parameter specifies the size of patterns (that is, the number of subframes) that can be received on the HSSCCH. For details, refer SET to the 3GPP UDTXDRXPARA(O TS 25.214 WRFDptional) protocol. 010686
BSC6900
BSC6900
CN domain specific Discontinuou s Reception (DRX) cycle length coefficient broadcast on ADD SIB1 and UCNDOMAIN(Optio used by UEs nal) in Idle Mode. This parameter specifies the UTRANspecific Discontinuou s Reception (DRX) cycle length coefficient. In connected mode, the UE uses the shorter one between CNspecific DRX cycle length coefficient and UTRANspecific DRX cycle length coefficient. In idle mode, the UE can use the DRX mode to receive paging indications so as to reduce power consumption; in this case, SET the UE needs UFRC(Optional) to monitor
WRFD010401
WRFD010301 WRFD010302
This parameter specifies whether the UE should monitor the transmission on the EAGCH in the serving EDCH cell and the transmission on each ERGCH in the serving EDCH radio link set if the data reception on the HS-SCCH overlaps with the data reception on the E-AGCH and on the ERGCH. The value of this parameter is a Boolean value. For details, refer SET to the 3GPP UDTXDRXPARA(O TS 25.214 WRFDptional) protocol. 010686
Drxvalid
BSC6900
This parameter specifies whether the parameters related to the DRX are valid. The parameters related to the DRX are optional and they can be set only when the parameters related to the DTX are configured. Value OFF indicates that the parameters are invalid and DRX cannot be configured. Value ON indicates that SET the UDTXDRXPARA(O parameters WRFDptional) are valid. 010686 Number of the E1T1 port for bearing the PPP link None
DS1
BSC6900
ADD PPPLNK(Optional)
DS1
BSC6900
ADD MPLNK(Optional)
WRFD050402 Number of WRFDthe E1T1 port 050409 for bearing WRFDthe PPP link 050410
BSC6900
DSCP
BSC6900
The DSCP is a field of the IP data packet. It is used to assign the differentiated service to the communicatio n networks. The DSCP code is used to label each data packet on the network and allocate the correspondin g service levels. In the ADD same network SCTPLNK(Optional environment, ) the larger the SET DSCP is, the PHBMAP(Mandator higher the y) priority is.
WRFD050402 WRFD050404
DSCP
PING IP(Optional)
Service code of the PING command, used to identify the PING command
DSCP
BSC6900
Differentiated service code is used to identify the SET service DSCPMAP(Mandat priority of the ory) user. Number of the DSP ADD where the OBJALMSHLD(Man alarm is datory) generated
DSPN
DSP No.
BSC6900
MRFD210304
DSPNO
Dsp No.
BSC6900
STR IPLOPTST(Mandat WRFDory) DSP number 050424 Whether daylight saving time has to be used
DST
DaylightSave
BSC6900
SET TZ(Optional)
MRFD210301
DSTIP
Destination IP address
BSC6900
ADD IPRT(Mandatory)
DSTMASK
ADD IPRT(Mandatory) Subnet mask None ADD TSCROSS(Mandat Destination of ory) timeslot cross None
DtxCycle1
This parameter specifies the size of pattern 1 transmitted on the UL DPCCH . For details, refer SET to the 3GPP UDTXDRXPARA(O TS 25.214 WRFDptional) protocol. 010686 This parameter specifies the size of pattern 2 transmitted on the UL DPCCH . For details, refer SET to the 3GPP UDTXDRXPARA(O TS 25.214 WRFDptional) protocol. 010686 This parameter specifies the delay time for DTX DRX being effective after it is enabled. For details, see 3GPP TS WRFD25.331. 010686
DtxCycle2
SET UFRC(Optional)
DtxLongPrea mble
BSC6900
Dtxvalid
BSC6900
If the interval at which two consecutive patterns are transmitted on the UL DPCCH is DtxCycle2, a certain number of timeslots should be transmitted before data is transmitted on the DPCCH. This parameter specifies the number of timeslots. For details, refer SET to the 3GPP UDTXDRXPARA(O TS 25.214 ptional) protocol. This parameter specifies whether the parameters related to the DTX are valid. Value OFF indicates that the parameters are invalid and DTX_DRX cannot be configured. Value ON indicates that SET the UDTXDRXPARA(O parameters ptional) are valid.
WRFD010686
WRFD010686
Period Timer Length For Cell DynCellOpenJ Dynamic ShutDown udgeTimerlen feature BSC6900
When the cell is automatically shut down, this parameter is used to repeatedly determine whether the SET cell needs to URNCCELLSHUTD be OWNPARA(Option automatically WRFDal) enabled. 020117 When the cell is automatically enabled, the cell can be automatically SET disabled URNCCELLSHUTD again only OWNPARA(Option after a period WRFDal) delay. 020117 When the switch is on, the Cell dynamic shutdown algorithm of the local RNC cell is enabled. When the switch is off, the Cell dynamic shutdown SET algorithm of URNCCELLSHUTD the local RNC OWNPARA(Option cell is WRFDal) disabled. 020117 When the switch is on, the "Cell dynamic ADD shutdown" UCELLDYNSHUTD feature is OWN(Mandatory) valid.
Protect Timer DynCellShutd Length For Cell ownProtectTi Dynamic ShutDown merlen feature BSC6900
BSC6900
BSC6900
WRFD020117
BSC6900
E1T1PN
BSC6900
When DynShutDow nType is ForceShutDo wn,the cell will be shut down in the shutdown time interval. When DynShutDow nType is ConditionalSh utDown, the cell will be shut down with some ADD conditions in UCELLDYNSHUTD the shutdown WRFDOWN(Optional) time interval. 020117 ADD Number of FRALNK(Mandatory the bearing ) port None
E1T1PN
BSC6900
None
Period of EDCH throughput ratio measurement . This parameter specifies the period of EDCH throughput ratio measurement . The throughput ratio over the E-DCH is periodically measured to implement state transition from E-DCH to FACH and SET DCCC UUESTATETRANS algorithm on (Optional) EDCH.
BSC6900
Number of pending periods after the throughput event 4B for state transition from E-DCH to FACH is triggered. This parameter is used to prevent too many throughput events 4B being reported. Pending time after the throughput event 4B is triggered = SET value of this UUESTATETRANS parameter x (Optional) 10 ms.
BSC6900
This parameter is used to check whether the UE in the low activity state. If the UE is on the E-DCH channel, the low activity counter increases by 1 every time SET throughput UUESTATETRANS ratio event 4B (Optional) is reported.
WRFD010202 WRFD01061208
BSC6900
Number of periods before the throughput ratio event 4B for state transition from E-DCH to FACH is triggered. When the throughput ratio is below the lower threshold and remains so for the period specified by this parameter, the event 4B is reported. This parameter prevents unnecessary throughput ratio events that are caused by throughput ratio SET instability UUESTATETRANS from being (Optional) triggered.
The parameter specifies the number of codes (SF=256) used by the EDCH Absolute Grant Channel (EAGCH). For details about this ADD parameter, UCELLHSUPA(Opti refer to 3GPP WRFDonal) TS 25.433. 010612
ECHOIP
Check IP address
BSC6900
Peer IP address to be checked. The input address (CHKIPADDR ) must be the address (regardless of the network segment address or host address of the peer address) in the network segment specified by the (PEERIPADD ADD R, WRFDIPPATH(Mandatory) PEERMASK). 050402 This parameter is used to count the adjusted step of Ec/N0 in the link SET quality adjust URACHMEASURE algorithm for WRFDPARA(Optional) E-FACH. 010688 This parameter specifies the adjustment cycle of Ec/N0. This parameter is also used to determine the measurement period of the RLC retransmissio ns in the link SET quality adjust URACHMEASURE algorithm for WRFDPARA(Optional) E-FACH. 010688
BSC6900
BSC6900
BSC6900
SET UFRC(Optional)
This parameter specifies the time duration when the reported Ec/N0 is valid. The reported Ec/N0 is valid for the period (starting from the time when the Ec/N0 report is received) specified by this WRFDparameter. 010510
BSC6900
This parameter specifies the time duration when the reported Ec/N0 is valid. The reported Ec/N0 is valid for the period (starting from the time when the Ec/N0 report is received) ADD specified by UCELLFRC(Option this WRFDal) parameter. 010510 This parameter specifies the maximum value that Ec/N0 can be stepped down in the link SET quality adjust URACHMEASURE algorithm for WRFDPARA(Optional) E-FACH. 010688
BSC6900
This parameter specifies the maximum value that Ec/N0 can be stepped up in the link SET quality adjust URACHMEASURE algorithm for WRFDPARA(Optional) E-FACH. 010688 This parameter specifies the threshold for determining the signal quality of the cell according to the Ec/N0 reported by UE. If the reported Ec/N0 exceeds the value of this parameter, it indicates that the signal quality of the cell is good and a high rate can be set for initial WRFDaccess. 010510
EcN0Ths
SET UFRC(Optional)
EcN0Ths
This parameter specifies the threshold for determining the signal quality of the cell according to the Ec/N0 reported by UE. If the reported Ec/N0 exceeds the value of this parameter, it indicates that the signal quality of the cell is good and a high ADD rate can be UCELLFRC(Option set for initial WRFDal) access. 010510 EXP ALMLOG(Optional) End serial STA number of the MRFDALMLOG(Optional) alarm record 210304 Date when the scheduled ADD task is MRFDSUBTSK(Optional) stopped 210305 End date of the alarm record. By default, the EXP end date is ALMLOG(Optional) 2037-12-31. End date of the alarm record. By default, the STA end date is ALMLOG(Optional) 2037-12-31.
ECSN
BSC6900
ED
End Date
BSC6900
ED
End Date
BSC6900
MRFD210304
ED
End Date
BSC6900
MRFD210304
EDAY
End date
BSC6900
MRFD210301
BSC6900
This parameter specifies the first MAC-d PDU size used by HSUPA services. The ADD size must be UTYPRABHSPA(O a multiple of 8 WRFDptional) bits. 010612
BSC6900
This parameter specifies the tenth MAC-d PDU size used by HSUPA services. The ADD size must be UTYPRABHSPA(O a multiple of 8 WRFDptional) bits. 010612 This parameter specifies the eleventh MACd PDU size used by HSUPA services. The ADD size must be UTYPRABHSPA(O a multiple of 8 WRFDptional) bits. 010612 This parameter specifies the twelfth MAC-d PDU size used by HSUPA services. The ADD size must be UTYPRABHSPA(O a multiple of 8 WRFDptional) bits. 010612 This parameter specifies the second MACd PDU size used by HSUPA services. The ADD size must be UTYPRABHSPA(O a multiple of 8 WRFDptional) bits. 010612
BSC6900
BSC6900
BSC6900
BSC6900
This parameter specifies the third MAC-d PDU size used by HSUPA services. The ADD size must be UTYPRABHSPA(O a multiple of 8 WRFDptional) bits. 010612 This parameter specifies the fourth MAC-d PDU size used by HSUPA services. The ADD size must be UTYPRABHSPA(O a multiple of 8 WRFDptional) bits. 010612 This parameter specifies the fifth MAC-d PDU size used by HSUPA services. The ADD size must be UTYPRABHSPA(O a multiple of 8 WRFDptional) bits. 010612 This parameter specifies the sixth MAC-d PDU size used by HSUPA services. The ADD size must be UTYPRABHSPA(O a multiple of 8 WRFDptional) bits. 010612
BSC6900
BSC6900
BSC6900
BSC6900
This parameter specifies the seventh MACd PDU size used by HSUPA services. The ADD size must be UTYPRABHSPA(O a multiple of 8 WRFDptional) bits. 010612 This parameter specifies the eighth MAC-d PDU size used by HSUPA services. The ADD size must be UTYPRABHSPA(O a multiple of 8 WRFDptional) bits. 010612 This parameter specifies the ninth MAC-d PDU size used by HSUPA services. The ADD size must be UTYPRABHSPA(O a multiple of 8 WRFDptional) bits. 010612
BSC6900
BSC6900
BSC6900
This parameter specifies the number of EDCH MAC-d PDU sizes. Currently, only PS conversationa l services can be configured with multiple E-DCH MACd PDU sizes. Other services can ADD have only one UTYPRABHSPA(O E-DCH MAC- WRFDptional) d PDU size. 010612
This parameter specifies the number of measurement periods during which no event 4A related to EDCH throughput is reported again after such an event 4A is reported. This parameter is set to avoid too many channel reconfiguratio n operations. The larger the value of this parameter, the longer the time from the last reporting of throughputrelated event 4A on E-DCH to the next ADD reporting, and UTYPRABDCCCM the smaller WRFDC(Optional) the possibility 01061208
This parameter specifies the number of measurement periods during which no event 4B related to EDCH throughput is reported again after such an event 4B is reported. This parameter is set to avoid too many channel reconfiguratio n operations. The larger the value of this parameter, the longer the time from the last reporting of throughputrelated event 4B on E-DCH to the next ADD reporting, and UTYPRABDCCCM the smaller WRFDC(Optional) the possibility 01061208
BSC6900
HSUPA UL rate adjustment set for E-DCH channel. It contains rates for rate adjustment for E-DCH channel and is used in the SET HSUPA UEDCHRATEADJU DCCC STSET(Optional) algorithm.
WRFD01061208 WRFD021101
BSC6900
This parameter specifies the maximum allowed SIR decrease step for HSUPA within an adjustment ADD period of UTYPRABOLPC(M outer-loop WRFDandatory) power control. 01061203
BSC6900
This parameter specifies the target number of E-DCH PDU retransfer when large probability retransmissio n is applied for this service. The large probability retransmissio n is used to improve the cell capacity ADD when the cell UTYPRABOLPC(M load is high or WRFDandatory) congested. 01061203 This parameter specifies the target number of E-DCH PDU retransfer when small probability retransmissio n is applied for this service. The small probability retransmissio n is used to improve the throughput for a single UE ADD when the cell UTYPRABOLPC(M load is WRFDandatory) normal. 01061203
BSC6900
This parameter specifies the number of measurement periods from the moment when the EDCH rate exceeds the 4A threshold to the moment when the throughputrelated event 4A on E-DCH is triggered. This parameter is used to avoid unnecessary reports triggered by EDCH uplink throughput fluctuation. The larger the value of this parameter, the longer the required ADD duration of UTYPRABDCCCM the E-DCH WRFDC(Optional) uplink 01061208
This parameter specifies the number of measurement periods from the moment when the EDCH rate falls below the 4B threshold to the moment when the throughputrelated event 4B on E-DCH is triggered. This parameter is set to avoid unnecessary reports triggered by EDCH uplink throughput fluctuation. The larger the value of this parameter, the longer the required duration of ADD the E-DCH UTYPRABDCCCM uplink WRFDC(Optional) throughput 01061208 This parameter SET specifies the UDTXDRXPARA(M E-DCH TTI andatory) type.
EdchTtiType
BSC6900
WRFD010612
EFACHDL
BSC6900
WRFD050406
This parameter specifies the maximum guaranteed power of the ADD DTCH UCELLEFACH(Opti mapped onto WRFDonal) the EFACH. 010688 E_FACH support indicator. When the indicator is TRUE, it indicates that ADD the cell UEXT3GCELL(Man supports WRFDdatory) E_FACH. 010688
EFachSupInd EFachSupInd
BSC6900
EFachSwitch
BSC6900
This parameter specifies whether the RRC connection is established preferentially on the EFACH. If this parameter is set to ON and both the UE and the serving cell support EFACH, then the RRC connection is established preferentially on the EFACH, regardless of the setting of SigChType. According to the related protocols, the UE cannot transmit signals over SET the FACH if URRCESTCAUSE( both the UE WRFDOptional) and the cell 010688
BSC6900
SET UCMCF(Optional)
This parameter specifies whether the compressed mode can be enabled for the HSPA+ service. When the parameter is set to TRUE, the compressed mode can be enabled for the HSPA+ service. When the parameter is set to FALSE, the uplink and downlink must return to the DCH before the compressed mode is enabled on for the HSPA+ service. This switch is set for compatibility
WRFD020303 WRFD020302
EM
EndType
BSC6900
Type of the end date. "WEEK" indicates that the end date is a weekday. "DATE" indicates that the end date is a month day. "DATEWEEK " indicates the end date is expressed by a combination of weekday and month MRFDSET TZ(Mandatory) day. 210301 When the switch is enabled, users of emergency call can preempt all the users of non emergency call. When the switch is disabled, users of emergency call can only preempt users of non emergency SET call with the UQUEUEPREEMP preempted T(Optional) attributes.
WRFD010505
BSC6900
Whether to verify the centralized signaling link in the case of the link establishment . ON: emergency verification, that is, the verification is not required. OFF: non emergency verification, that is, the verification is required during the establishment of a signaling link in a link set. Through verification, the stable operation state of a signaling link can be ensured. You are advised to use the ADD normal WRFDMTP3LKS(Optional) verification. 050301
BSC6900
SET USMLC(Optional)
This parameter specifies whether the RNC specially handles the LCS requests of emergency calls. In other words, the RNC provides highly accurate location for emergency calls regardless of license WRFDconstraints. 021104
EMITTHD
ADD MPGRP(Optional)
WRFD050302
EMONTH
End month
BSC6900
MRFD210301
EMSIP
EMS IP Address
BSC6900
IP address of the NE ADD management EMSIP(Mandatory) system None Encryption mode used when the NE serves as the FTP client AUTO: indicating that the FTP client automatically selects the encryption mode PLAINTEXT: indicating that the plain text mode is used forcibly. ENCRYPTED : indicating that the SET encrypted FTPSSRV(Optional mode is used ) forcibly. None
BSC6900
BSC6900
Encryption mode supported when the NE serves as the FTP server AUTO: indicating that the FTP client automatically selects the encryption mode PLAINTEXT: indicating that the plain text mode is used forcibly. ENCRYPTED : indicating that the encrypted SET mode is used FTPSCLT(Optional) forcibly. None The encryption algorithm supported by RNC. Both UEA0 and UEA1 can be selected at WRFDone time. 011402
BSC6900
SET UUEA(Optional)
ENDAID
End Alarm ID
BSC6900
MRFD210304
EndTime1
BSC6900
End time of the first interval when the "Cell dynamic ADD shutdown" UCELLDYNSHUTD feature is WRFDOWN(Mandatory) valid. 020117
EndTime2
End time of the second interval when the "Cell dynamic ADD shutdown" UCELLDYNSHUTD feature is WRFDOWN(Mandatory) valid. 020117 End time of the third interval when the "Cell dynamic ADD shutdown" UCELLDYNSHUTD feature is WRFDOWN(Mandatory) valid. 020117 Status of the scheduled task. This parameter determines whether to SET start the SCHTSKSW(Mand scheduled atory) task.
EndTime3
ENF
Status
BSC6900
None
ENF
Subtask Status
BSC6900
ENTITYT
BSC6900
ADD M3LE(Mandatory)
Type of the M3UA local entity. For details about the ASP and IPSP, see RFC4666. M3UA_ASP: suggested to use when there is a signaling transfer point (STP) between the local entity and the destination entity M3UA_IPSP: suggested to use when there is no signaling transfer point (STP) between the local entity and the destination WRFDentity 050409
ENTITYT
BSC6900
ADD M3DE(Mandatory)
Type of the destination entity. For details, see RFC4666. M3UA_ASP: suggested to use when there is a signaling transfer point (STP) between the local entity and the destination entity M3UA_IPSP: suggested to use when there is no signaling transfer point (STP) between the local entity and the destination entity M3UA_SS7S P: suggested to use when the destination WRFDentity is a 050409
ERCODE
Return Code
BSC6900
Return code of the command. If this parameter is specified, only the correspondin g record is displayed. If this parameter is not specified, the return code is not MRFDEXP LOG(Optional) considered. 210305
The parameter specifies the number of codes (SF=128) used by the EDCH Relative Grant Channel (ERGCH)/EDCH Hybrid ARQ Indicator Channel (EHICH). The ERGCH is used to adjust the uplink power available for the UE. The E-HICH is used to provide feedback on the ACK/NACK information, which indicates whether the ADD data that the UCELLHSUPA(Opti RNC receives WRFDonal) from the E010612
BSC6900
SET ETHPORT(Optional ) ADD PPPLNK(Optional) Error-frame ADD alarm MPGRP(Optional) threshold SET
WRFD050425
BSC6900
ETHPORT(Optional ) ADD PPPLNK(Optional) ADD Error-frame WRFDMPGRP(Optional) detect switch 050425 End synchronizati on number of EXP the alarm MRFDALMLOG(Optional) record 210304 AAL2 connection establishment indication timer. This timer is started when an AAL2 signaling entity sends the service user an indication for SET establishing AAL2TMR(Optional an AAL2 WRFD) connection. 05030104
ESSN
ESTINDTMR
BSC6900
BSC6900 BSC6900
AAL2 connection establishment request timer. This timer is started when an AAL2 signaling entity sends the peer node a request for SET establishing AAL2TMR(Optional an AAL2 ) connection. End time of SET TZ(Mandatory) DST
WRFD05030104 MRFD210301
ET
End Time
BSC6900
ET
End Time
BSC6900
The operation time of the log record is prior to this time. If this parameter is not specified, the end time MRFDEXP LOG(Optional) is not limited. 210305 Time when the scheduled subtask is stopped. If the time mode is set to "DAILY_T", "WEEKLY_T" , or "MONTHLY_ T", you ADD should set SUBTSK(Mandator this y) parameter. None
ET
Execute Type
BSC6900
Execution mode of the commands 1. ONE_BY_ON E: indicating that the commands are executed one by one according to the execution sequence. Only one command can be executed once. 2. PARALLEL: indicating that multiple commands are executed in parallel. Multiple commands RUN can be BATCHFILE(Option executed al) once. None The operation time of the log record is prior to this time. If this parameter is not specified, the end time MRFDCOL LOG(Optional) is not limited. 210305 End time of the alarm record. By default, the EXP end time is ALMLOG(Optional) 23:59:59.
ET
End Time
BSC6900
ET
End Time
BSC6900
MRFD210304
ET
End Time
BSC6900
End time of the alarm record. By default, the STA end time is ALMLOG(Optional) 23:59:59.
MRFD210304
ETD
End Date
BSC6900
ADD OP(Mandatory)
End date of the user operation. Input format: YYYY&MM& MRFDDD 210305
ETP
Log Type
BSC6900
Type of the log to be queried. The result is displayed by the specified EXP LOG(Optional) type.
MRFD210305
ETT
End Time
BSC6900
ADD OP(Mandatory)
End time of the user operation. The input format of this parameter is MRFDHH&MM&SS. 210305
Event4aThd
This parameter specifies the threshold to trigger event 4A related to DCH traffic volume, that is, the upper limit of the traffic volume. The larger the value of this parameter, the smaller the possibility of triggering ADD traffic-related UTYPRABDCCCM event 4A on WRFDC(Optional) DCH. 021101
Event4bThd
This parameter specifies the threshold to trigger event 4B related to DCH traffic volume, that is, the lower limit of the traffic volume. The smaller the value of this parameter, the smaller the possibility of triggering ADD traffic-related UTYPRABDCCCM event 4B on WRFDC(Mandatory) DCH. 021101 This parameter specifies the event A reporting period. It refers to the delay from the moment when event A is triggered to the moment when the event is reported. Note: this parameter is only used in rate adjust algorithm based on TCP, and is not used in ADD RLC flow UTYPRABRLC(Opti control WRFDonal) algorithm. 040100
BSC6900
EventAThred
Event A threshold[0.1%]
BSC6900
This parameter specifies the threshold of event A, that is, the upper limit of RLC retransmissio n ratio. When the monitored RLC retransmissio n ratio exceeds this threshold and triggers the event A, it indicates that the quality of the radio link is poor, and flow control measures should be done to ADD reduce the UTYPRABRLC(Opti RLC WRFDonal) throughput. 040100
EventBThred
Event B threshold[0.1%]
BSC6900
This parameter specifies the threshold of event B, that is, the lower limit of RLC retransmissio n ratio. When the monitored RLC retransmissio n ratio goes lower than this threshold and triggers the event B, it indicates that the quality of the radio link is good, and RLC ADD throughput UTYPRABRLC(Opti could be WRFDonal) increased. 040100
EWEEK
End week
BSC6900
MRFD210301
EWSEQ
BSC6900
BSC6900
ADD EMU(Optional)
Upper limit of extended output analog signal 1. If "Sensor Type of External Analog 1" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 1" is set to CURRENT, the unit of this parameter is MRFDA. 210304
BSC6900
ADD EMU(Optional)
Lower limit of extended output analog signal 1. If "Sensor Type of External Analog 1" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 1" is set to CURRENT, the unit of this parameter is MRFDA. 210304 Sensor type of extended analog signal MRFD1 210304
BSC6900
ADD EMU(Optional)
BSC6900
ADD EMU(Optional)
Maximum measurement range of extended analog signal 1. If "Sensor Type of External Analog 1" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 1" is set to CURRENT, the unit of this parameter is MRFDA. 210304
BSC6900
ADD EMU(Optional)
Minimum measurement range of extended analog signal 1. If "Sensor Type of External Analog 1" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 1" is set to CURRENT, the unit of this parameter is MRFDA. 210304
BSC6900
ADD EMU(Optional)
Upper limit of extended output analog signal 2. If "Sensor Type of External Analog 2" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 2" is set to CURRENT, the unit of this parameter is MRFDA. 210304
BSC6900
ADD EMU(Optional)
Lower limit of extended output analog signal 2. If "Sensor Type of External Analog 2" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 2" is set to CURRENT, the unit of this parameter is MRFDA. 210304 Sensor type of extended analog signal MRFD2 210304
BSC6900
ADD EMU(Optional)
BSC6900
ADD EMU(Optional)
Maximum measurement range of extended analog signal 2. If "Sensor Type of External Analog 2" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 2" is set to CURRENT, the unit of this parameter is MRFDA. 210304
BSC6900
ADD EMU(Optional)
Minimum measurement range of extended analog signal 2. If "Sensor Type of External Analog 2" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 2" is set to CURRENT, the unit of this parameter is MRFDA. 210304
BSC6900
ADD EMU(Optional)
Upper limit of extended output analog signal 3. If "Sensor Type of External Analog 3" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 3" is set to CURRENT, the unit of this parameter is MRFDA. 210304
BSC6900
ADD EMU(Optional)
Lower limit of extended output analog signal 3. If "Sensor Type of External Analog 3" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 3" is set to CURRENT, the unit of this parameter is MRFDA. 210304 Sensor type of extended analog signal MRFD3 210304
BSC6900
ADD EMU(Optional)
BSC6900
ADD EMU(Optional)
Maximum measurement range of extended analog signal 3. If "Sensor Type of External Analog 3" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 3" is set to CURRENT, the unit of this parameter is MRFDA. 210304
BSC6900
ADD EMU(Optional)
Minimum measurement range of extended analog signal 3. If "Sensor Type of External Analog 3" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 3" is set to CURRENT, the unit of this parameter is MRFDA. 210304
BSC6900
ADD EMU(Optional)
Upper limit of extended output analog signal 4. If "Sensor Type of External Analog 4" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 4" is set to CURRENT, the unit of this parameter is MRFDA. 210304
BSC6900
ADD EMU(Optional)
Lower limit of extended output analog signal 4. If "Sensor Type of External Analog 4" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 4" is set to CURRENT, the unit of this parameter is MRFDA. 210304 Sensor type of extended analog signal MRFD4 210304
BSC6900
ADD EMU(Optional)
BSC6900
ADD EMU(Optional)
Maximum measurement range of extended analog signal 4. If "Sensor Type of External Analog 4" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 4" is set to CURRENT, the unit of this parameter is MRFDA. 210304
BSC6900
ADD EMU(Optional)
Minimum measurement range of extended analog signal 4. If "Sensor Type of External Analog 4" is set to VOLTAGE, the unit of this parameter is V; if "Sensor Type of External Analog 4" is set to CURRENT, the unit of this parameter is MRFDA. 210304
Pending time after the traffic volume event 4B for state transition from FACH to PCH is reported. This parameter is used to prevent too many traffic volume SET events 4B UUESTATETRANS being WRFD(Optional) reported. 010202
BSC6900
FachId
FACH ID
BSC6900
When the traffic volume is below the 4B threshold and remains so for the period specified by this parameter, the event 4B is reported. This parameter prevents unnecessary traffic volume events that are caused by traffic volume SET instability UUESTATETRANS from being (Optional) triggered. Uniquely identifying a FACH bearing the common transport ADD channel in a UCTCH(Mandatory) cell
WRFD010202
WRFD021000
WRFD010616
BSC6900
This parameter specifies the maximum power of the FACH. For details of this parameter, ADD refer to the UCELLMBMSFACH 3GPP TS WRFD(Optional) 25.211. 020501 This parameter specifies the SET maximum UMBMSFACH(Opti power of the onal) FACH. This parameter SET describes UMSCHFACH(Opti Fach Max onal) Power.
BSC6900
WRFD020501
BSC6900
WRFD020501
BSC6900
Indicating whether the FACH measurement occasion period length coefficient should be delivered through the system information. If the inter-freq or inter-RAT measurement control information is broadcast through the system information, some UEs in CELL_FACH state need the FACH measurement occasion period length coefficient for measurement . When [Interfreq/InterADD RAT Meas UCELLMEAS(Optio Ctrl Info Ind] WRFDnal) is set to 020102 This parameter defines the reduce value ADD in reducing UCELLOLC(Option FACH power WRFDal) Action. 020107
FACTOR
SPI Factor[%]
BSC6900
This parameter specifies the factor associated with the scheduling priority indicator. This factor is used in two algorithms. In scheduling algorithm, it is used to adjust the handling priority for different services. In IUB congestion algorithm, it is used to allocate bandwidth for different services. If the factor is higher, it is more possible for the user to increase the SET handling USPIFACTOR(Man priority or get WRFDdatory) more Iub 020806 Activation factor. The bandwidth of this link is the bandwidth of the CCP, NCP, ALCAP, and IPoA PVC SET multiplied by CTRLFACTOR(Ma the activation ndatory) factor. None
FACTOR
Factor
BSC6900
FailTimeTh
SET UDCCC(Optional) SET FANSPEED(Option al) SET FANSPEED(Option al) SET FANSPEED(Option al)
This parameter specifies the threshold of allowed times of rate increase consecutive failure within a certain monitoring period. If the times of failure is beyond this threshold, subsequent rate increase is not allowed even if the 4A measurement report is WRFDreceived. 021101 Continuous speed adjustment Discrete speed adjustment Duty ratiobased speed adjustment
BSC6900
FANADJUST Discrete adjustment COMMAND1 command BSC6900 Duty ratio FANADJUST adjustment COMMAND2 command BSC6900
BSC6900
SET Fan FANSPEED(Option adjustment al) mode SET FANSPEED(Manda Type of the tory) fan
MRFD210301
FANFLAG
Fan Type
BSC6900
MRFD210301
BSC6900
MRFD210301
FANTYPE
FanBox Type
BSC6900
LOD FAN(Mandatory)
MRFD210301
FastDormanc y FastDormancy
BSC6900
WRFDADD 021302 UIMEITAC(Optional FastDormanc WRFD) y. 021311 This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of fast dormancy user from SET FACH/E_FAC UUESTATETRANS H to (Optional) DCH/HSPA. None
FC
BSC6900
FCINDEX
BSC6900
Whether to send and process the flow control frame on the physical layer. The setting of this parameter must be negotiated with that on SET the ETHPORT(Optional interconnecte WRFD) d side. 02130406 Flow control ADD parameter FRALNK(Optional) index None
FCINDEX
BSC6900
ADD IMAGRP(Optional)
Flow control parameter index. This parameter must be a flow control parameter that is already set through the "ADD PORTFLOW CTRLPARA" command. None
FCINDEX
BSC6900
ADD UNILNK(Optional)
WRFD050302 WRFD050405
FCINDEX
BSC6900
SET OPT(Mandatory)
WRFD050304 WRFD050405
FCINDEX
BSC6900
WRFD050405
FCINDEX
BSC6900
ADD PPPLNK(Optional)
None
FCINDEX
BSC6900
ADD MPGRP(Optional)
FCINDEX
BSC6900
WRFD050408
FCINDEX
BSC6900
FCINDEX
BSC6900
WRFD050405 WRFD050405
FCINDEX
BSC6900
MRFD211503
FCSTYPE
BSC6900
ADD PPPLNK(Optional)
CRC verification mode of PPP MRFDlink. 210103 CRC verification mode of MP link.
FCSTYPE
BSC6900
ADD MPLNK(Optional)
None
FCSW
Flow control switch. Other switches are valid only when "Flow control SET switch" is WRFDFCSW(Mandatory) "ON". 040100 This parameter specifies the step size of the closedloop power control performed on DL DPCH in Frequency Division Duplex (FDD) mode. For details of this parameter, refer to the 3GPP TS WRFD25.214. 020504
SET UFRC(Optional)
Fdpch with MIMO FdpchDivModf priority Tx diversity orMIMO mode FDPCH diversity FdpchDivModf mode for MIMO orMIMO user
BSC6900
The indicator shows the preferred transmission diversity mode of ADD FDPCH for UEXT3GCELL(Opti MIMO to WRFDonal) choose. 020203 FDPCH ADD diversity UCELLSETUP(Man mode for datory) MIMO user.
BSC6900
WRFD010652
BSC6900
The indicator shows the preferred transmission diversity mode of ADD FDPCH for UEXT3GCELL(Opti non-MIMO to WRFDonal) choose. 020203
FDPCH diversity FdpchDivModf mode for non MIMO orNonMIMO user BSC6900
FDPCH ADD diversity UCELLSETUP(Man mode for non WRFDdatory) MIMO user. 010652 This parameter specifies the maximum reference power for the F-DPCH. This parameter indicates the maximum value of reference FDPCH TX power, that is, the value of the Maximum DL Power IE. For details of this parameter, SET refer to the UFDPCHRLPWR(O 3GPP TS WRFDptional) 25.433. 020501
BSC6900
BSC6900
This parameter specifies the minimum reference power for the F-DPCH. This parameter indicates the minimum value of reference FDPCH TX power, that is, the value of the Minimum DL Power IE. For details of this parameter, SET refer to the UFDPCHRLPWR(O 3GPP TS WRFDptional) 25.433. 020501
FdpchPO2
BSC6900
This parameter specifies the offset between TPC command power in FDPCH channel and reference FDPCH TX power (expressed by SET the Initial DL UFDPCHPARA(Opt Transmission WRFDional) Power IE). 020504
FDWINDOW
BSC6900
Number of CPU usage sampling times for fast judgment. The value of this parameter must be of half size of SET "Filter FCCPUTHD(Option window" or WRFDal) smaller. 040100
FILE
File Name
BSC6900
The name of the file cannot contain the path and suffix. The suffix is automatically added. The name of the file is composed of English letters, numerals, and common symbols, and the characters (@, #, !, %, ^, &, *, [, ], /, \, ', and ") cannot appear in the name of the MRFDEXP LOG(Optional) file. 210305 ZIP FILE(Mandatory) Path of the target file MRFD210401
FILE
BSC6900
FileName
File Name
BSC6900
FILEPATH
BSC6900
Name of the backup file. The file name is composed of English letters, numerals, and common symbols, and the characters (@, #, !, %, ^, &, *, [, ], /, \, ', and ") cannot BKP appear in the LOGDB(Optional) Path file name. to save the exported file. The path must be a valid path on the OMU server. If the OMU runs the LINUX system, the input path must start with the symbol "/" or "\", for example, "/mml". If the OMU runs the WINDOWS system, the input path can be a full path (for example, "D:\mml") or a relative path (for example, "/mml"). If the relative path is used, the root directory is same as that of the OMU EXP installation CFGMML(Optional) directory.
MRFD210305
MRFD210301
FILETYPE
BSC6900
FilterCoef
BSC6900
Type of the alarm log file EXP to be ALMLOG(Optional) According exported to the 3GPP TS 25.331, the filtering of the measurement value is calculated using the following formula, where k represents this parameter: Fn = (1 - a) * Fn - 1 + a * Mn a = (1/2)(k/2) Here, Fn: the updated filtered measurement result Fn - 1: the old filtered measurement result Mn: the latest received measurement result from SET physical layer UINTRAFREQHO( measurement Optional) s
MRFD210304
WRFD020202 WRFD020203
BSC6900
L3 filtering coefficient for event 2D or event 2F measurement . The larger the value of this parameter, the stronger the smoothing effect and the higher the anti-fastfading capability, but the lower the signal change tracing capability. If the value of this parameter is set too small, unnecessary inter-system handovers may occur. SET The UINTERRATHOCO parameter V(Optional) has the same ADD physical UCELLINTERRATH meaning and WRFDOCOV(Optional) measurement 020303
FIN
Final
BSC6900
Execution result. If you select "FALSE", only the records of failed operations are displayed. If you select "TRUE", only the records of successful operations are displayed. If this parameter is not specified, all the records are MRFDEXP LOG(Optional) displayed. 210305 This parameter specifies the fixed MAC-hs window size. It is valid when the [Is MAC-hs window size fixed or not] parameter is WRFDset to TRUE. 010510
BSC6900
BSC6900
Switch of the FLC algorithm. The FLC is a mandatory algorithm used in the multifrequency network to guarantee that UEs camping on other frequencies can reselect the current frequency to receive the MBMS service. ADD Therefore, UCELLMCCH(Optio the switch is WRFDnal) on by default. 010626
FLOWCTRLS WITCH Flow control switch BSC6900 FLOWCTRLS WITCH Flow control switch BSC6900 FLOWCTRLS WITCH Flow control switch BSC6900
WRFD050402 WRFD050409 Link flow WRFDcontrol switch 050410 Link flow control switch None Logical port flow control WRFDswitch 050302
FLOWCTRLS WITCH Flow control switch BSC6900 FLOWCTRLS WITCH Flow control switch BSC6900
Port flow SET OPT(Optional) control switch ETHPORT(Optional Port flow ) control switch
WRFD050304 WRFD040100
ADD PPPLNK(Optional)
ADD MPGRP(Optional)
FLOWCTRLS WITCH Flow control switch BSC6900 FLOWCTRLS WITCH Flow control switch BSC6900
Logical port flow control switch Logical port flow control switch
WRFD050408 WRFD050408
FN
File Name
BSC6900
MRFD210303
FN FN
BSC6900 BSC6900
MRFD210401 None
FN
File Name
BSC6900
Name of the file. The following special characters are not allowed in the file name: \, /, EXP :, *, ?, ", <, >, CFGMML(Optional) |, (, ), &, and MRFDBKP DB(Optional) $. 210301 Name of the specified file. By default, the file is in CHK the OMU DATA2LIC(Optional active-area ) path RVK \ftp\license MRFDLICENSE(Optional) folder. 210403 When the CELLID+RTT method is selected, this parameter specifies whether forced soft handover is performed if the number of RTT measured result is smaller than 3. After soft handover is complete, accuracy of the CELLID+RTT method is enhanced when the RNC obtains more radio WRFDlinks. 020801
FN
File Name
BSC6900
BSC6900
SET USMLC(Optional)
FPTIMER
BSC6900
ADD IPMUX(Optional)
Maximum time of delay for multiplexing. This parameter is used for the system to send the multiplexed data. If the time for buffering the data exceeds this value, the system does not wait for the multiplexing of other packets. In this way, the overlong delay can be prevented. None
FRAGSIZE
MP flake size
BSC6900
ADD MPGRP(Optional)
WRFD050420 WRFD050412
FRALNKN
BSC6900
None
FRALNKT
BSC6900
FREQ
Time Mode
BSC6900
FREQ
Time Mode
BSC6900
Time mode used when the log is exported. "ONTIME" indicates the time between two exact time. "RELATIVE_ T" indicates the time EXP before the MRFDLOG(Mandatory) currenton time. 210305 Based different requirements, you can set different time points for the scheduled task. Seven time modes are available: 1. ONTIME: When this parameter is set to "ONTIME", the command is executed once only at the specified time point. 2. DAILY_T: When this parameter is set to "DAILY_T", the command is executed every day. You can also set up to five time points ADD for executing SUBTSK(Mandator the command y) in the day. None
FRMLEN
TX frame length
BSC6900
ADD IMAGRP(Optional)
Frame length. A longer frame improves the transmission efficiency, but at the same time reduces the sensitivity to errors. None
FT
File Type
BSC6900
Type of the file used for saving MRFDEXP LOG(Optional) exported logs 210305
FTI
BSC6900
WRFD050406 WRFD050424
FTI
BSC6900
WRFD050406
FUNCTIONS WITCH1
Function Switch1
BSC6900
MRFD210403
FUNCTIONS WITCH2
Function Switch2
BSC6900
MRFD210403
FUNCTIONS WITCH3
Function Switch3
BSC6900
MRFD210403
BSC6900 BSC6900
Function switch 4 Function switch 5 If the available forward bandwidth is less than or equal to this value, the forward congestion alarm is emitted and forward ADD congestion TRMLOADTH(Optio control is nal) striggered.
MRFD210403 MRFD210403
WRFD050406 MRFD211503
If the available forward bandwidth is greater than this value, the forward congestion alarm is cleared and forward ADD congestion TRMLOADTH(Optio control is nal) stopped. If the ratio of available forward bandwidth is greater than this value, the forward congestion alarm is cleared and forward ADD congestion TRMLOADTH(Optio control is nal) stopped. If the ratio of available forward bandwidth is less than or equal to this value, the forward congestion alarm is emitted and forward ADD congestion TRMLOADTH(Optio control is nal) triggered.
WRFD050406 MRFD211503
WRFD050406 MRFD211503
WRFD050406 MRFD211503
BSC6900
If the available forward bandwidth is greater than this value, the forward overload congestion alarm is cleared and forward ADD overload TRMLOADTH(Optio control is nal) stopped. If the ratio of available forward bandwidth is greater than this value, the forward overload congestion alarm is cleared and forward ADD overload TRMLOADTH(Optio control is nal) stopped. If the available forward bandwidth is less than or equal to this value, the forward overload congestion alarm is emitted and forward ADD overload TRMLOADTH(Optio control is nal) triggered.
WRFD050406 MRFD211503
BSC6900
WRFD050406 MRFD211503
BSC6900
WRFD050406 MRFD211503
BSC6900
If the ratio of available forward bandwidth is less than or equal to this value, the forward overload congestion alarm is emitted and forward ADD overload TRMLOADTH(Optio control is nal) triggered.
WRFD050406 MRFD211503
FWDRESVH OTH
BSC6900
Ratio of reserved forward ADD bandwidth for TRMLOADTH(Optio handover nal) user
WRFD050406 MRFD211503
Reserved forward ADD bandwidth for TRMLOADTH(Optio handover nal) user The power occupancy factor of the control part. For detailed information of this ADD parameter, UPRACHTFC(Man refer to 3GPP datory) TS 25.214.
WRFD050406 MRFD211503
BSC6900
WRFD020501 WRFD022000
BSC6900
The power occupancy factor of the data part. For detailed information of this ADD parameter, UPRACHTFC(Optio refer to 3GPP nal) TS 25.214.
WRFD020501 WRFD022000
GCDF
GCDF
BSC6900
Format of the geographic coordinates. The values include "DEG" and MRFDADD GPS(Optional) "SEC". 210502 Support localization maintenance, Degree mode and Degree Minute and ADD Second mode USMLCCELL(Optio can be WRFDnal) selected. 020801
GCDF
BSC6900
GENCCHDL
BSC6900
WCDMA AMR general common channel ADD service TRMFACTOR(Opti downlink WRFDonal) factor 050406
GENCCHUL
WCDMA general common ADD channel TRMFACTOR(Opti service uplink WRFDonal) factor 050406
Global routing management switch. If this switch is turned on, the IP addresses in the controlled range cannot be in the same network segment. None
Maximum rate of the narrowband AMR speech service for WRFDgold users. 020701
BSC6900
Maximum rate of the wideband AMR speech service for gold users.
WRFD010613 WRFD020701
GoldUserLoad Gold user load ControlSwitch control switch GPS data report GPSPERIOD period
BSC6900
BSC6900
Indicates whether gold users involve in the switch of congestion control. According to the policy set for gold users by operators, if service quality of gold users should be guaranteed even in resource congestion, the switch should be disabled. If the switch is enabled, LDR such as rate reduction and handover also occurs on gold users even in cell resource congestion, which ADD impacts user UCELLLDR(Option service al) quality. If the Period for reporting ADD GPS(Optional) GPS data
WRFD020106 MRFD210502
GRPID
GRPT
WRFD050406
BSC6900
HO UCELL(Optional) ADD UEXT2GCELL(Man datory) ADD Uniquely U2GNCELL(Mandat identifying a ory) GSM cell. A name ADD identifying a UEXT2GCELL(Man GSM cell datory) uniquely.
WRFD020303
BSC6900
WRFD020303
BSC6900
None
BSC6900
CPU usage threshold for handover control. When the average CPU usage of sliding windows reaches or exceeds the threshold, SET handover flow FCCPUTHD(Option control is WRFDal) triggered. 040100
BSC6900
Packet queue usage threshold for handover control. When the average packet queue usage of sliding windows reaches or exceeds the threshold, SET handover flow FCMSGQTHD(Opti control is WRFDonal) triggered. 040100 CPU usage threshold for recovery from handover control. When the average CPU usage of sliding windows is lower than the threshold, SET handover flow FCCPUTHD(Option control is WRFDal) stopped. 040100 Packet queue usage threshold for recovery from handover control. When the average packet queue usage of sliding windows is lower than the threshold, SET handover flow FCMSGQTHD(Opti control is onal) stopped. Whether to SET control FCSW(Optional) handover flow
BSC6900
HANDOVERR Handover restore THD threshold HANDOVERS Handover flow W control switch
BSC6900
WRFD040100 WRFD040100
BSC6900
BSC6900
When event 5A is triggered, a pending timer is started, during which event 5A will not be reported before the specified number is reached. This parameter can control ADD the frequency UTYPRABQUALIT for reporting WRFDYMEAS(Mandatory) event 5A. 021101
HappyBR
BSC6900
This parameter specifies the Happy bit rate of the besteffort (BE) service with different user priorities. This Happy bit rate is sent to NodeB by RNC through IUB interface. When the NodeB resource is limited and the HS-DSCH bit rate of the user exceeds the Happy bit rate, the HSDSCH scheduling priority will be decreased. When this parameter is set to zero, it indicates that NodeB will SET not adjust the UUSERHAPPYBR( HS-DSCH WRFDOptional) scheduling 01061010
This parameter indicates whether the cell of the neighboring RNC supports the HARQ Preamble capability. Mode1 means the cell supports the HARQ Preamble capability, whereas ADD Mode0 UEXT3GCELL(Opti means not WRFDonal) supporting it. 020203 This parameter specifies the time used for decision of HSUPA happy bit. If all the buffered user data can be transmitted at the current rate during the time specified by this parameter, the HSUPA happy bit is set to happy; otherwise, the HSUPA ADD happy bit is UTYPRABHSPA(O set to WRFDptional) unhappy. 01061010 Heartbeat ADD interval when SCTPLNK(Optional the SCTP WRFD) server is idle 050402
HBDelaycnd
BSC6900
HBINTER
Heartbeat interval
BSC6900
HCARRYT
BSC6900
ADD VPCLCX(Mandator y) Link type This parameter is used for setting the punish timer ADD length for UCELLHSDPA(Opti code adjust onal) for hsdpa.
None
HCodeAdjPun Punish Timer shTimerLengt Length for Code h Adjust for HSDPA
BSC6900
WRFD020108
HCSPrio
BSC6900
This parameter indicates the HCS priority level The smaller the ADD coverage of UEXT3GCELL(Opti the cell is, the onal) higher the ADD priority level UEXT2GCELL(Opti of the cell onal) should be set. HCS priority of the cell belongs to. The parameter depends on HCS rules. ADD For details, UCELLHCS(Option refer to 3GPP al) TS 25.304.
HCSPrio
BSC6900
HDBKGDL
WRFD050406
WRFD050406
HDBKGPRIT H
HSDPA background primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSDPA ADD background WRFDLOADEQ(Optional) service. 050404
WRFD050406
HDBKGSEC WHT
HSDPA background primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSDPA ADD background WRFDLOADEQ(Optional) service. 050404
HDCONVDL
BSC6900
WCDMA HSDPA conversationa ADD l service TRMFACTOR(Opti downlink WRFDonal) factor 050406
BSC6900
HSDPA conversationa l service ADD bearer WRFDTRMMAP(Optional) primary path 050406 HSDPA conversationa l primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSDPA ADD conversationa WRFDLOADEQ(Optional) l service. 050404
BSC6900
HSDPA conversationa l service bearer ADD secondary WRFDTRMMAP(Optional) path 050406 HSDPA conversationa l primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSDPA ADD conversationa WRFDLOADEQ(Optional) l service. 050404
HSDPA conversational pri HDCONVSEC sec path load ratio WHT threshold
BSC6900
BSC6900
HSDPA high interactive primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSDPA high ADD interactive WRFDLOADEQ(Optional) service. 050404 HSDPA high primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSDPA high ADD interactive WRFDLOADEQ(Optional) service. 050404
HDHIGHINTE HSDPA high pri sec RACTSECW path load ratio HT threshold BSC6900
HDINTERDL
BSC6900
WRFD050406
BSC6900
WRFD050406
BSC6900
WRFD050406
BSC6900
WRFD050406
BSC6900
WRFD050406
WRFD050406
BSC6900
HSDPA middle PRI interactive ADD secondary TRMMAP(Optional) path HSDPA low interactive primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSDPA low ADD interactive LOADEQ(Optional) service.
WRFD050406
WRFD050404
HSDPA low HDLOWINTE interactive pri sec RACTSECW path load ratio HT threshold
BSC6900
HSDPA low interactive primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSDPA low ADD interactive WRFDLOADEQ(Optional) service. 050404 HSDPA middle interactive primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSDPA middle ADD interactive WRFDLOADEQ(Optional) service. 050404
BSC6900
HSDPA mid interactive pri sec HDMIDINTER path load ratio ACTSECWHT threshold
BSC6900
HSDPA middle primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSDPA middle ADD interactive WRFDLOADEQ(Optional) service. 050404
HDSIPDL
WRFD050406
WRFD050406
HSDPA IMS signaling primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSDPA ADD IMS signaling WRFDLOADEQ(Optional) service. 050404
WRFD050406
HSDPA IMS Signal HDSIPSECW pri sec path load HT ratio threshold BSC6900
HSDPA IMS signaling primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSDPA ADD IMS signaling WRFDLOADEQ(Optional) service. 050404
HDSRBDL
BSC6900
WRFD050406
BSC6900
WRFD050406
HDSRBPRIT H
HSDPA signaling primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSDPA ADD signaling WRFDLOADEQ(Optional) service. 050404
BSC6900
WRFD050406
HDSRBSEC WHT
BSC6900
HSDPA signaling primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSDPA ADD signaling WRFDLOADEQ(Optional) service. 050404
HDSTRMDL
BSC6900
WRFD050406
BSC6900
WRFD050406
BSC6900
HSDPA streaming primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSDPA ADD streaming WRFDLOADEQ(Optional) service. 050404
BSC6900
WRFD050406
HSDPA streaming HDSTRMSEC pri sec path load WHT ratio threshold
BSC6900
HSDPA streaming primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSDPA ADD streaming WRFDLOADEQ(Optional) service. 050404
HDVOICEDL
BSC6900
WCDMA HSDPA voice ADD service TRMFACTOR(Opti downlink WRFDonal) factor 050406
BSC6900
BSC6900
HSDPA voice service bearer ADD secondary WRFDTRMMAP(Optional) path 050406 Fractional link ADD number of the VPCLCX(Optional) low end port None
BSC6900
BSC6900
ADD UNRNC(Optional)
32-bit unsigned integer. 1) DL_DCCH_S WITCH. When it is checked, SRNC will include the IE "RB Id for handover message" in the IE "SRNS Relocation Info", the target RNC should choose the IE "DL DCCH message" and include the DL DCCH message that should be transmitted transparently to the UE by the source RNC. In that case, the target RNC is integrity protecting the WRFDmessage if 02060502
HHOTRIG
BSC6900
Indicates whether to trigger hard handover cross the Iur interface between the RNC and the ADD neighboring UNRNC(Mandatory) RNC.
HIMAGRPN
IMA group ADD number of the VPCLCX(Optional) low end port None
Maximum SET History PWDPOLICY(Optio Password nal) Numbers. A timer to RNC wait for the response to active set SET update in soft USTATETIMER(Op handover tional) procedure. A timer to RNC wait for the response to the cell update confirm from SET UE in forward USTATETIMER(Op handover tional) procedure.
MRFD210305
HoAsuTmr
BSC6900
WRFD020202 WRFD020203
WRFD010801 WRFD010802
HOCovPrio
BSC6900
Priority of coveragebased interfrequency handover. "0" means that the coveragebased interfrequency handover is not supported. "1" means the highest priority. "3" means the lowest priority. The lower the priority, the easier it is for coveragebased interfrequency handover and the neighboring cell to be delivered as the measurement ADD object. For UINTERFREQNCE example, it is WRFDLL(Optional) more possible 020302 A timer to RNC wait for paging response in SET forward USTATETIMER(Op handover tional) procedure. A timer to RNC wait for the response to physical channel reconfiguratio SET n in hard USTATETIMER(Op handover tional) procedure.
WRFD010801 WRFD010802
BSC6900
BSC6900
HostType
BSC6900
A timer to RNC wait for relocation request in SET forward USTATETIMER(Op handover tional) procedure. This parameter specifies the NodeB host type in RNC Node Redundancy function. If the parameter value is SINGLEHOS T, the physical NodeB is managed only by one RNC. If the parameter value is PRIMHOST or SECHOST, the physical NodeB can be managed by two RNCs. By default, the NodeB is managed by the host RNC. When the host RNC fails, the ADD physical UNODEB(Optional) NodeB is
WRFD02060503
WRFD040202
HoSwitch
HandOver switch
BSC6900
HandOver switch. 1) HO_ALGO_H CS_SPEED_ EST_SWITC H: When the switch is on, the RNC evaluates the UE's moving speed in the HCS and initiates fast intra-layer or slow interlayer handover. 2) HO_ALGO_L DR_ALLOW_ SHO_SWITC H: When the switch is on, the LDR interfrequency handover is allowed during soft handover. 3) HO_ALGO_M SET BMS_FLC_S UCORRMALGOSW WITCH: ITCH(Optional) When the
WRFD01061006 WRFD01061204 WRFD020103 WRFD020201 WRFD020202 WRFD020203 WRFD020301 WRFD020302 WRFD020303 WRFD020304 WRFD020305 WRFD020306 WRFD020307 WRFD020308 WRFD02030801 WRFD02030802 WRFD020309 WRFD-
HOThdEcN0
BSC6900
Threshold of signal quality of the target frequency for triggering interfrequency(Ec/ No) measurement . If the mode is set to event mode, this parameter is used to set measurement control on the event 2C. If the mode is set to periodical mode, this parameter is used to estimate the periodical reports and only if quality of the target frequency is beyond the threshold, the ADD DRD UCELLMBDRINTE procedure is WRFDRFREQ(Optional) triggered. 020302
HOThdRscp
BSC6900
BSC6900
Threshold of signal quality of the target frequency for triggering interfrequency(RS CP) measurement . If the mode is set to event mode, this parameter is used to set measurement control on the event 2C. If the mode is set to periodical mode, this parameter is used to estimate the periodical reports and only if quality of the target frequency is beyond the threshold, the ADD DRD UCELLMBDRINTE procedure is RFREQ(Optional) triggered. A timer to RNC wait for the response to the TrCh reconfiguratio n or RB reconfiguratio n response from UE in SET hard USTATETIMER(Op handover tional) procedure.
WRFD020302
HPN
BSC6900
Optical interface ADD number of the VPCLCX(Optional) low end port None
DL activity factor of the HSUPA background service. Signals might be discontinuous ly transmitted because of the activation detection of conversationa l service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation time. The activity factors of the same transport SET channel might UADMCTRL(Option be different in WRFDal) UL and DL. 020101
BSC6900
Average throughput admission threshold of the HSDPA best effort traffic. If the sum of PBR of all the accessed HSDPA BE users is lower than the average throughput admission threshold of the HSDPA BE service multiplied by the sum of GBR of all the accessed HSDPA BE users, it indicates that the QoS of the accessed users cannot be satisfied and new HSDPA BE ADD services are UCELLCAC(Option not allowed. WRFDal) Otherwise, 020101
BSC6900
SET UCMCF(Optional)
This parameter determines whether the compressed mode (CM) is permitted for the UE when the HSDPA services exist. If the parameter value is set to TRUE, compressed mode is permitted on HSDPA, and HSDPA services can be set up when the compressed mode is activated. If the parameter value is set to FALSE, channel switch on H2D (from HS-DSCH to DCH) should be performed before
BSC6900
DL activity factor of the HSUPA conversationa l service. Signals might be discontinuous ly transmitted because of the activation detection of conversationa l service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation time. The activity factors of the same transport SET channel might UADMCTRL(Option be different in WRFDal) UL and DL. 020101
BSC6900
DL activity factor of the HSUPA interactive service. Signals might be discontinuous ly transmitted because of the activation detection of conversationa l service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation time. The activity factors of the same transport SET channel might UADMCTRL(Option be different in WRFDal) UL and DL. 020101 SET ULDM(Optional) SET USATLDM(Optional ) SET ULDM(Optional) SET USATLDM(Optional ) Length of smoothing filter window of HSDPA power requirement.
WRFD020102
BSC6900
The minimum number of HSDPA RAB establish request per CPUS to report KPI alarm. In a checking period,if the number of HSDPA RAB establish request is higher than the threshold and the HSDPA RAB setup successful ratio is lower than this threshold,the KPI alarm of SET HSDPA RAB UKPIALMTHD(Opti setup ratio is WRFDonal) reported. 010510
Threshold of HSDPA RAB setup successful ratio per CPUS to report KPI alarm. In a checking period,if the ratio is lower than this threshold and the number of HSDPA RAB establish request is higher than the related threshold,the KPI alarm of SET HSDPA RAB UKPIALMTHD(Opti setup ratio is WRFDonal) reported. 010510
BSC6900
DL activity factor of the HSUPA streaming service. Signals might be discontinuous ly transmitted because of the activation detection of conversationa l service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation time. The activity factors of the same transport SET channel might UADMCTRL(Option be different in WRFDal) UL and DL. 020101
BSC6900
Average throughput admission threshold of the HSDPA streaming service. If the sum of PBR of all the accessed streaming users is lower than the average throughput admission threshold of the HSDPA streaming service multiplied by the sum of GBR of all the accessed streaming users, it indicates that the QoS of the accessed users cannot be satisfied and new ADD HSDPA UCELLCAC(Option streaming WRFDal) services are 020101 The total HSDPA traffic of all operators cannot exceed the SET HSDPA value MRFDLICENSE(Optional) in the license. 210403 The cell is shut down automatically only when the HSDPA user ADD number is no UCELLDYNSHUTD greater than WRFDOWN(Optional) the threshold. 020117
BSC6900
BSC6900
This parameter specifies the first MAC-d PDU size on the HSDSCH. For BE services, the size of MAC-d PDUs is usually set to a large value. For streaming services, the size remains the same value as that on the DCH. ADD The size must UTYPRABHSPA(O be a multiple WRFDptional) of 8 bits. 010610
BSC6900
This parameter specifies the second MACd PDU size on the HSDSCH. For BE services, the size of MAC-d PDUs is usually set to a large value. For streaming services, the size remains the same value as that on the DCH. ADD The size must UTYPRABHSPA(O be a multiple WRFDptional) of 8 bits. 010610
BSC6900
This parameter specifies the third MAC-d PDU size on the HSDSCH. For BE services, the size of MAC-d PDUs is usually set to a large value. For streaming services, the size remains the same value as that on the DCH. ADD The size must UTYPRABHSPA(O be a multiple WRFDptional) of 8 bits. 010610
BSC6900
This parameter specifies the fourth MAC-d PDU size on the HSDSCH. For BE services, the size of MAC-d PDUs is usually set to a large value. For streaming services, the size remains the same value as that on the DCH. ADD The size must UTYPRABHSPA(O be a multiple WRFDptional) of 8 bits. 010610
BSC6900
This parameter specifies the fifth MAC-d PDU size on the HSDSCH. For BE services, the size of MAC-d PDUs is usually set to a large value. For streaming services, the size remains the same value as that on the DCH. ADD The size must UTYPRABHSPA(O be a multiple WRFDptional) of 8 bits. 010610
BSC6900
This parameter specifies the sixth MAC-d PDU size on the HSDSCH. For BE services, the size of MAC-d PDUs is usually set to a large value. For streaming services, the size remains the same value as that on the DCH. ADD The size must UTYPRABHSPA(O be a multiple WRFDptional) of 8 bits. 010610
BSC6900
This parameter specifies the seventh MACd PDU size on the HSDSCH. For BE services, the size of MAC-d PDUs is usually set to a large value. For streaming services, the size remains the same value as that on the DCH. ADD The size must UTYPRABHSPA(O be a multiple WRFDptional) of 8 bits. 010610
BSC6900
This parameter specifies the eighth MAC-d PDU size on the HSDSCH. For BE services, the size of MAC-d PDUs is usually set to a large value. For streaming services, the size remains the same value as that on the DCH. ADD The size must UTYPRABHSPA(O be a multiple WRFDptional) of 8 bits. 010610
This parameter specifies the number of HSDSCH MAC-d PDU sizes. Currently, only PS conversationa l services can be configured with multiple HS-DSCH MAC-d PDU sizes. Other services can have only one ADD HS-DSCH UTYPRABHSPA(O MAC-d PDU WRFDptional) size. 010610 ADD VPCLCX(Mandator y) Slot number If E_F_DPCH are selected, the correspondin g function will ADD be enabled; UCELLALGOSWIT otherwise, CH(Optional) disabled.
HSN
BSC6900
None
BSC6900
WRFD010611 WRFD010652
BSC6900
SET UFRC(Optional)
According to the relevant protocols, MIMO, 64QAM, and HS-SCCH Less Operation cannot be configured concurrently to the same UE. This parameter specifies the configuration preference of MIMO, 64QAM, and HS-SCCH Less Operation when both the UE and the cell support these three features.
BSC6900
If 64QAM,MIM O,E_FACH,D TX_DRX,HS_ SCCH_LESS _OPERATIO N and L2ENHANCE D are selected, the correspondin g function will ADD be enabled; UCELLALGOSWIT otherwise, CH(Optional) disabled.
HspaPower
This parameter specifies the difference between the total HSPA power and the maximum transmission power of a cell. The maximum value of HSPA dynamical power can be adjusted to the total amount of HSPA power. For details about this ADD parameter, UCELLHSDPA(Opti refer to 3GPP WRFDonal) TS 25.308. 01061004
BSC6900
HSPA serving cell change is usually triggered by event 1D. To avoid frequent serving cell change which may affect the system performance, a protection timer TimerHSPA is needed. This timer shall be started upon HSPA serving cell changed, i.e. the serving HSDSCH cell changed or the EDCH serving cell changed. And no more 1Dtriggered serving cell change shall SET be performed UHOCOMM(Option until the timer al) expires.
WRFD01061006 WRFD01061204
BSC6900
This parameter specifies whether the Mac-hs transport block transmitted in HS-SCCH Less Operation mode supports second HSPDSCH code. For details, refer to the SET 3GPP TS UHSSCCHLESSOP 25.321 WRFDPARA(Optional) protocol. 010687 This parameter specifies whether the Mac-hs transport block transmitted in HS-SCCH Less Operation mode supports second HSPDSCH code. For details, refer to the SET 3GPP TS UHSSCCHLESSOP 25.321 WRFDPARA(Optional) protocol. 010687
BSC6900
BSC6900
This parameter specifies whether the Mac-hs transport block transmitted in HS-SCCH Less Operation mode supports second HSPDSCH code. For details, refer to the SET 3GPP TS UHSSCCHLESSOP 25.321 WRFDPARA(Optional) protocol. 010687 This parameter specifies whether the Mac-hs transport block transmitted in HS-SCCH Less Operation mode supports second HSPDSCH code. For details, refer to the SET 3GPP TS UHSSCCHLESSOP 25.321 WRFDPARA(Optional) protocol. 010687
BSC6900
BSC6900
The parameter specifies the number of HSDPSCH codes. This parameter is valid only when "Allocate Code Mode" is set to "Manual". For detailed information about this WRFDADD parameter, 01061001 UCELLHSDPA(Opti refer to 3GPP WRFDonal) TS 25.308. 01061005
The parameter determines the maximum number of HSPDSCH codes (SF=16). This parameter is valid only when "Allocate Code Mode" is set to "Automatic". The number of codes used by the HSPDSCH is dynamically set between "Code Max Number for HS-PDSCH" and "Code Min Number for HSPDSCH", based on whether the code tree is idle or busy. WRFDADD When the 01061001 UCELLHSDPA(Opti code WRFDonal) resource 01061005
BSC6900
The parameter specifies the minimum number of the HS-PDSCH codes (SF=16). This parameter is valid only when "Allocate Code Mode" is set to Automatic. The number of codes used by the HSPDSCH is dynamically set between "Code Max Number for HS-PDSCH" and "Code Min Number for HSPDSCH", based on the idle state of the code tree. When the non-WRFDADD H services 01061001 UCELLHSDPA(Opti need more WRFDonal) code 01061005
BSC6900
Measure Power Offset (MPO) Constant is used to compute Measure Power Offset, as shown in Measure Power Offset = Max(-6, Min(13,CellM axPower PcpichPower Measure Power OffsetConsta nt)). For details of the IE "Measure Power WRFDADD Offset", refer 010610 UCELLHSDPA(Opti to 3GPP TS WRFDonal) 25.308. 01061004 This parameter indicates the preferred transmit ADD diversity UEXT3GCELL(Opti mode of the onal) HSPDSCH. This parameter indicates the TX diversity ADD preferably UCELLSETUP(Man selected by datory) HSPDSCH.
WRFD020203
WRFD010610
HSRN
BSC6900
ADD VPCLCX(Mandator Subrack y) number This parameter decides the maximum number of subscribers that the NodeB can schedule in a TTI period. For detailed information of this ADD parameter, UCELLHSDPA(Opti refer to 3GPP onal) TS 25.308.
None
HsScchCode Num
BSC6900
BSC6900
SET UFRC(Optional)
This parameter specifies the time interval of sending HSUPA scheduling information for TTI 10ms when the user has Schedule WRFDGrant. 010612 This parameter specifies the time interval of sending HSUPA scheduling information alone for TTI 10ms when the user has no Schedule Grant and its buffer length is greater WRFDthan zero. 010612
Hsupa10msS HSUPA TTI 10ms chPrdForNon schedule period Grant without grant[ms]
BSC6900
SET UFRC(Optional)
BSC6900
SET UFRC(Optional)
This parameter specifies the time interval of sending HSUPA scheduling information for TTI 2ms when the user has Schedule WRFDGrant. 010612 This parameter specifies the time interval of sending HSUPA scheduling information alone for TTI 2ms when the user has no Schedule Grant and its buffer length is greater WRFDthan zero. 010612
Hsupa2msSc HSUPA TTI 2ms hPrdForNonG schedule period rant without grant[ms]
BSC6900
SET UFRC(Optional)
UL activity factor of the HSUPA background service. Signals might be discontinuous ly transmitted because of the activation detection of conversationa l service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation time. The activity factors of the same transport SET channel might UADMCTRL(Option be different in WRFDal) UL and DL. 020101
BSC6900
SET UDCCC(Optional)
Threshold for rate decrease of HSUPA BE service soft handover. If the current rate is beyond the threshold, the rate over the EDCH is lowered to the threshold before the soft handover, thus ensuring the success of the soft handover of the HSUPA BE service. The rate increase of HSUPA in SHO status is not limited by this WRFDparameter. 01061208
BSC6900
When the dynamic CE algorithm on NodeB is applied, the CE consumption of HSUPA UE is based on the GBR. When the dynamic CE algorithm on NodeB is not applied, the CE consumption of HSUPA UE is based on the MBR. If the CE consumption of HSUPA UE is based on the GBR, the CE LDR will not select HSUPA users to do data rate reduction. If the CE ADD consumption UNODEBALGOPA of HSUPA UE WRFDRA(Optional) is based on 020101
BSC6900
SET UCMCF(Optional)
This parameter determines whether the compressed mode (CM) is permitted for the UE when HSUPA services exist. If the parameter value is set to Permit, compressed mode is permitted on HSUPA, and HSUPA services can be set up when the compressed mode activated. If the parameter value is set to Limited, channel switch on E2D (from EDCH to DCH) should be performed before the
BSC6900
UL activity factor of the HSUPA conversationa l service. Signals might be discontinuous ly transmitted because of the activation detection of conversationa l service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation time. The activity factors of the same transport SET channel might UADMCTRL(Option be different in WRFDal) UL and DL. 020101
BSC6900
SET UDCCC(Optional)
Strategy of the UE for rate adjustment over the EDCH. RATE_UP_A ND_DOWN_ ON_EDCH indicates that the rate over the EDCH can be raised or lowered. RATE_UP_O NLY_ON_ED CH indicates that the rate over the EDCH can only be raised. When UE is in low activity state, it is no need to degrade the traffic rate to the threshold for HSUPA DCCC before state transition to CELL_FACH. WRFDThat means 01061208
BSC6900
Threshold of all the HSUPA user PBR whose schedule priority is the ADD same as that UCELLCAC(Option of users to be WRFDal) admitted. 020101
BSC6900
Threshold of all the HSUPA user PBR whose schedule priority is higher than ADD that of users UCELLCAC(Option to be WRFDal) admitted. 020101 HSUPA BE traffic initial bit rate. When DCCC algorithm switch and HSUPA DCCC algorithm switch are enabled, the uplink initial bit rate will be set to this value if the uplink max bit rate is higher than the initial WRFDbit rate. 01061208
BSC6900
SET UFRC(Optional)
BSC6900
UL activity factor of the HSUPA interactive service. Signals might be discontinuous ly transmitted because of the activation detection of conversationa l service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation time. The activity factors of the same transport SET channel might UADMCTRL(Option be different in WRFDal) UL and DL. 020101 Threshold of all the HSUPA user PBR whose schedule priority is lower than ADD that of users UCELLCAC(Option to be WRFDal) admitted. 020101 Length of smoothing filter window of HSUPA bit WRFDrate. 020102
SET ULDM(Optional)
BSC6900
The minimum number of HSUPA RAB establish request per CPUS to report KPI alarm. In a checking period,if the number of HSUPA RAB establish request is higher than the threshold and the HSUPA RAB setup successful ratio is lower than this threshold,the KPI alarm of SET HSUPA RAB UKPIALMTHD(Opti setup ratio is WRFDonal) reported. 010510
Threshold of HSUPA RAB setup successful ratio per CPUS to report KPI alarm. In a checking period,if the ratio is lower than this threshold and the number of HSUPA RAB establish request is higher than the related threshold,the KPI alarm of SET HSUPA RAB UKPIALMTHD(Opti setup ratio is WRFDonal) reported. 010510
BSC6900
UL activity factor of the HSUPA streaming service. Signals might be discontinuous ly transmitted because of the activation detection of conversationa l service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation time. The activity factors of the same transport SET channel might UADMCTRL(Option be different in WRFDal) UL and DL. 020101 The total HSUPA traffic of all operators cannot exceed the SET HSUPA value MRFDLICENSE(Optional) in the license. 210403
BSC6900
HSUPA auto ADD retransmit UCELLLDM(Option load release WRFDal) threshold. 020102
BSC6900
HSUPA auto ADD retransmit UCELLLDM(Option load trigger WRFDal) threshold. 020102 The cell is shut down automatically only when the HSUPA user ADD number is no UCELLDYNSHUTD greater than WRFDOWN(Optional) the threshold. 020117
BSC6900
WRFD050406
HUBKGPRIT H
HSUPA background primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSUPA ADD background WRFDLOADEQ(Optional) service. 050404
WRFD050406
HUBKGSEC WHT
HSUPA background primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSUPA ADD background WRFDLOADEQ(Optional) service. 050404
HUBKGUL
WCDMA HSUPA ADD background TRMFACTOR(Opti service uplink WRFDonal) factor 050406
BSC6900
BSC6900
HSUPA conversational pri HUCONVSEC sec path load ratio WHT threshold
BSC6900
HSUPA conversationa l primary secondary path load ADD ratio WRFDLOADEQ(Optional) threshold 050404
HUCONVUL
WCDMA HSUPA ADD conversationa TRMFACTOR(Opti l service WRFDonal) uplink factor 050406
BSC6900
HSUPA high interactive ADD primary path WRFDLOADEQ(Optional) load threshold 050404
HSUPA high HUHIGHINTE interactive pri sec RACTSECW path load ratio HT threshold
BSC6900
HSUPA high primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSUPA high ADD interactive WRFDLOADEQ(Optional) service. 050404
HUINTERUL
BSC6900
WCDMA HSUPA ADD interactive TRMFACTOR(Opti service uplink WRFDonal) factor 050406
BSC6900
WRFD050406
BSC6900
WRFD050406
BSC6900
WRFD050406
BSC6900
WRFD050406
WRFD050406
WRFD050406
BSC6900
HSUPA low HULOWINTE interactive pri sec RACTSECW path load ratio HT threshold Enable Humidity HUM_MASK Alarm Reporting
BSC6900 BSC6900
HSUPA low interactive primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSUPA low ADD interactive LOADEQ(Optional) service. HSUPA low interactive primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSUPA low ADD interactive LOADEQ(Optional) service. ADD Humidity EMU(Optional) alarm switch
WRFD050404
WRFD050404 MRFD210304
BSC6900
ADD EMU(Optional)
Upper limit of humidity. When the humidity exceeds the upper limit, a humidity alarm is MRFDreported. 210304
BSC6900
ADD EMU(Optional)
Lower limit of humidity. When the humidity is lower than the lower limit, a humidity alarm is MRFDreported. 210304
BSC6900
HSUPA middle interactive primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSUPA middle ADD interactive WRFDLOADEQ(Optional) service. 050404 HSUPA middle primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSUPA middle ADD interactive WRFDLOADEQ(Optional) service. 050404
HSUPA mid interactive pri sec HUMIDINTER path load ratio ACTSECWHT threshold
BSC6900
HUNILNKN
BSC6900
UNI link ADD number of the VPCLCX(Optional) low end port None
WRFD050406
HSUPA IMS signaling primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSUPA ADD IMS signaling WRFDLOADEQ(Optional) service. 050404
WRFD050406
HSUPA IMS Signal HUSIPSECW pri sec path load HT ratio threshold BSC6900
HSUPA IMS signaling primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSUPA ADD IMS signaling WRFDLOADEQ(Optional) service. 050404
HUSIPUL
WRFD050406
BSC6900
WRFD050406
HUSRBPRIT H
HSUPA signaling primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSUPA ADD signaling WRFDLOADEQ(Optional) service. 050404
BSC6900
WRFD050406
HUSRBSEC WHT
BSC6900
HSUPA signaling primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSUPA ADD signaling WRFDLOADEQ(Optional) service. 050404
HUSRBUL
BSC6900
WRFD050406
BSC6900
BSC6900
HSUPA streaming service ADD bearer TRMMAP(Optional) primary path HSUPA streaming primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HUDPA ADD streaming LOADEQ(Optional) service.
WRFD050406
WRFD050404
BSC6900
WRFD050406
HSUPA streaming HUSTRMSEC pri sec path load WHT ratio threshold
BSC6900
HSUPA streaming primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the HSUPA ADD streaming WRFDLOADEQ(Optional) voice service. 050404
HUSTRMUL
BSC6900
WCDMA HSUPA ADD streaming TRMFACTOR(Opti service uplink WRFDonal) factor 050406
BSC6900
BSC6900
HUVOICEUL
WCDMA ADD HSUPA voice TRMFACTOR(Opti service uplink WRFDonal) factor 050406
HVCI
High VCI
BSC6900
VCI value of ADD the high end VPCLCX(Optional) VCL port ADD VPI value of VPCLCX(Mandator the high end y) VCL This port parameter specifies the hysteresis value for event 1A. The value of this parameter correlates with slow fading. The larger the value of this parameter, the less possibility of ping-pong effect or wrong decision. But the event might not be triggered in time. For the definition, refer to 3GPP TS 25.331. Event 1A is a key event that SET adds a cell to UINTRAFREQHO( the active set. Optional) To ensure ADD timely UCELLINTRAFRE handover, the QHO(Optional) hysteresis of
None
HVPI
High VPI
BSC6900
None
HystFor1A
1A hysteresis[0.5dB]
BSC6900
WRFD020202 WRFD020203
HystFor1B
1B hysteresis[0.5dB]
BSC6900
This parameter specifies the hysteresis value for event 1B. The value of this parameter correlates with slow fading. The larger the value of this parameter, the less possibility of ping-pong effect or wrong decision. But the event might not be triggered in time. For the definition, refer to 3GPP TS 25.331. In addition, this SET parameter is UINTRAFREQHO( related to Optional) filter ADD coefficient UCELLINTRAFRE and trigger QHO(Optional) delay.
WRFD020202 WRFD020203
HystFor1C
1C hysteresis[0.5dB]
BSC6900
This parameter specifies the hysteresis value for event 1C. The value of this parameter correlates with slow fading. The larger the value of this parameter, the less possibility of ping-pong effect or wrong decision. But the event might not be triggered in time. For the definition, refer to 3GPP TS 25.331. In addition, SET this UINTRAFREQHO( parameter is Optional) related to ADD filter UCELLINTRAFRE coefficient QHO(Optional) and trigger
WRFD020202 WRFD020203
HystFor1D
1D hysteresis[0.5dB]
BSC6900
This parameter specifies the hysteresis value for event 1D. The value of this parameter correlates with slow fading. The larger the value of this parameter, the less possibility of ping-pong effect or wrong decision. But the event might not be triggered in time. For the definition, refer to 3GPP TS 25.331. In addition, SET this UINTRAFREQHO( parameter is Optional) related to ADD filter UCELLINTRAFRE coefficient QHO(Optional) and trigger
WRFD020202 WRFD020203
HystFor1F
1F hysteresis[0.5dB]
BSC6900
This parameter specifies the hysteresis value for event 1F. The value of this parameter correlates with slow fading. The larger the value of this parameter, the less possibility of ping-pong effect or wrong decision. But the event might not be triggered in time. For the definition, refer to 3GPP TS 25.331. In addition, this SET parameter is UINTRAFREQHO( related to Optional) filter ADD coefficient UCELLINTRAFRE and trigger QHO(Optional) delay.
WRFD020202 WRFD020203
HystFor1J
1J hysteresis[0.5dB] BSC6900
This parameter specifies the hysteresis value for event 1J. The value of this parameter correlates with slow fading. The larger the value of this parameter, the less possibility of ping-pong effect or wrong decision. But the event might not be triggered in time. For the definition, refer to 3GPP TS 25.331. In addition, this SET parameter is UINTRAFREQHO( related to Optional) filter ADD coefficient UCELLINTRAFRE and trigger QHO(Optional) delay.
HystFor2B
2B hysteresis[0.5dB]
BSC6900
Hysteresis value for the event 2B. The value of this parameter correlates with slow fading. The larger the value of this parameter, the stronger the capability of resisting signal fluctuation. Thus, the ping-pong effect can be resisted, but the speed of the handover algorithm to respond to signal change becomes SET lower, and UINTERFREQHOC therefore OV(Optional) event 2B ADD might not be UCELLINTERFRE triggered in WRFDQHOCOV(Optional) time. 020302
Hystfor2C
2C hysteresis[0.5dB]
BSC6900
Hysteresis value for the event 2C. The value of this parameter correlates with slow fading. The larger the value of this parameter, the stronger the capability of resisting signal fluctuation. Thus, the ping-pong effect can be resisted, but the speed of the handover SET algorithm to UINTERFREQHON respond to COV(Optional) signal change ADD becomes UCELLINTERFRE lower, and QHONCOV(Option therefore al) event 2B ADD might not be UCELLMBDRINTE triggered in WRFDRFREQ(Optional) time. 021200
HystFor2D
2D hysteresis[0.5dB]
BSC6900
Hysteresis value for the event 2D. The value of this parameter correlates with slow fading. The larger the value of this parameter, the smaller probability of ping-pong effect or wrong decision, but event 2D might not be triggered in time. In periodical report mode, this parameter is used to resist the ping-pong effect of SET event 2D (the UINTERFREQHOC quality of the OV(Optional) currently used ADD frequency is UCELLINTERFRE lower than the WRFDQHOCOV(Optional) threshold) 020302
Hystfor2D
2D hysteresis[0.5dB]
BSC6900
Hysteresis value for the event 2D. The value of this parameter correlates with slow fading. The larger the value of this parameter, the smaller probability of ping-pong effect or wrong decision, but event 2D might not be triggered in time. In periodical report mode, this parameter is used to resist the ping-pong effect of SET event 2D (the UINTERRATHOCO quality of the V(Optional) currently used ADD frequency is UCELLINTERRATH lower than the WRFDOCOV(Optional) threshold) 020303
HystFor2F
2F hysteresis[0.5dB]
BSC6900
Hysteresis value for the event 2F. The value of this parameter correlates with slow fading. The larger the value of this parameter, the smaller probability of ping-pong effect or wrong decision, but event 2F might not be triggered in time. In periodical report mode, this parameter is used to resist the ping-pong effect of SET event 2D (the UINTERFREQHOC quality of the OV(Optional) currently used ADD frequency is UCELLINTERFRE lower than the WRFDQHOCOV(Optional) threshold) 020302
Hystfor2F
2F hysteresis[0.5dB]
BSC6900
Hysteresis value for the event 2F. The value of this parameter correlates with slow fading. The larger the value of this parameter, the smaller probability of ping-pong effect or wrong decision, but event 2D might not be triggered in time. In periodical report mode, this parameter is used to resist the ping-pong effect of SET event 2D (the UINTERRATHOCO quality of the V(Optional) currently used ADD frequency is UCELLINTERRATH lower than the WRFDOCOV(Optional) threshold) 020303
Hystfor3A
3A hysteresis[0.5dB]
BSC6900
Hysteresis value for the event 3A. The value of this parameter correlates with slow fading. The larger the value of this parameter, the stronger the capability of resisting signal fluctuation. Thus, the ping-pong effect can be avoided, but the speed of the handover algorithm to respond to signal change becomes lower. If the inter-RAT SET handover UINTERRATHOCO hysteresis is V(Optional) set to an ADD excessively UCELLINTERRATH high value, WRFDOCOV(Optional) the GSM cell 020303
Hystfor3C
3C hysteresis[0.5dB]
BSC6900
Hysteresis value for the event 3C. The value of this parameter correlates with slow fading. The larger the value of this parameter, the stronger the capability of resisting signal fluctuation. Thus, the ping-pong effect can be avoided, but the speed of the handover algorithm to respond to signal change SET becomes UINTERRATHONC lower. If the OV(Optional) inter-RAT ADD handover UCELLINTERRATH hysteresis is ONCOV(Optional) set to an ADD excessively UCELLMBDRINTE high value, RRAT(Optional) the GSM cell
WRFD020305 WRFD020306
BSC6900
Hysteresis value for interRAT measurement periodical reports. This parameter aims to prevent the mis-decision caused by unexpected jitters of signals during inter-RAT handover decisions. The HystforInterR AT and the inter-RAT handover decision threshold determine whether to trigger interRAT SET handovers. UINTERRATHOCO The larger the V(Optional) value of this ADD parameter, UCELLINTERRATH the stronger WRFDOCOV(Optional) the capability 020303
BSC6900
Hysteresis for interfrequency hard handover in periodical report mode. This parameter is used to estimate the interfrequency handover at the RNC. The larger the value of this parameter, the stronger the capability of resisting signal fluctuation. Thus, the ping-pong effect can be SET resisted, but UINTERFREQHOC the speed of OV(Optional) the handover ADD algorithm to UCELLINTERFRE respond to QHOCOV(Optional) signal change ADD becomes UCELLMBDRINTE lower, and WRFDRFREQ(Optional) therefore 020302 This timer is started after a connection is established successfully. If a detection message is not received when this timer expires, the SET connection SCCPTMR(Optiona will be WRFDl) released. 050301
IARXTMR
Inactive RX timer
BSC6900
IATXTMR
Inactive TX timer
BSC6900
This timer is started after a connection is established successfully. When this timer expires, a detection SET message will SCCPTMR(Optiona be sent to the WRFDl) peer end. 050301
ICMPPKGLE N
BSC6900
ADD IPPATH(Optional)
ICMP packet length. It is the total length of the ICMP packet containing the WRFDIP header. 050402
ID
Task ID
BSC6900
ID
Task ID
BSC6900
ADD SCHTSK(Mandator y) SET SCHTSKSW(Optio nal) ADD SUBTSK(Optional) Number of ADD the scheduled SUBCMD(Optional) task None Number of STR the scheduled SCHTSK(Optional) task None
Indicating whether the UE in idle mode is allowed to access the cell. When the cell status is BARRED, it indicates that the UEs in idle mode are barred to select/reselec t the cell even in the case of emergency calls. For detailed information of this ADD parameter, UCELLACCESSST refer to 3GPP WRFDRICT(Mandatory) TS 25.331. 021103
BSC6900
Indicating whether the UE in idle mode is allowed to reselect another intrafrequency cell. This parameter is valid when [Cell barred indicator for SIB3] is BARRED. If this parameter is ALLOWED, the UE in idle mode can select another intrafrequency cell when the cell selection/rese lection condition is satisfied. If this parameter is NOT_ALLOW ED, the UE in ADD idle mod UCELLACCESSST cannot select WRFDRICT(Optional) another intra- 021103
IdleQhyst1s
The hysteresis value of the serving FDD cells in idle mode in case the quality measurement for cell selection and reselection is set to CPICH RSCP. It is related to the slow fading feature of the area where the cell is located. The greater the slow fading variance is, the greater this parameter. According to the R regulation, the current serving cell involves in cell selection ADD after the UCELLSELRESEL( measurement Optional) value is
IdleQhyst2s
The hysteresis value of the serving FDD cells in idle mode in case the quality measurement for cell selection and reselection is set to CPICH Ec/No. It is related to the slow fading feature of the area where the cell is located. The greater the slow fading variance is, the greater this parameter. It is optional. If it is not configured, [Hysteresis 1] will be adopted as the value. ADD This UCELLSELRESEL( parameter is Optional) not
IdleQoffset1sn IdleQoffset1sn[dB]
BSC6900
Offset of cell CPICH RSCP measurement value in cell selection or reselection when the UE is in idle mode. Offset of neighboring cell CPICH measurement value. This parameter is used for RSSI measurement . The offset is subtracted from the neighboring cell measurement value before cell reselection. This parameter defines the ADD offset of cell UINTRAFREQNCE CPICH RSCP LL(Optional) measurement ADD value in cell UINTERFREQNCE selection or LL(Optional) reselection
WRFD010801 WRFD010802
IdleQoffset2sn IdleQoffset2sn[dB]
BSC6900
Offset of cell CPICH Ec/No measurement value in cell selection or reselection when the UE is in idle mode. Offset of neighboring cell CPICH measurement value This parameter is used for Ec/No measurement . The offset is subtracted from the neighboring cell measurement value before cell reselection. In cell reselection ADD algorithm, this UINTRAFREQNCE parameter is LL(Optional) used for ADD moving the UINTERFREQNCE border of a LL(Optional) cell. This
WRFD010801 WRFD010802
BSC6900
Threshold for interfrequency cell reselection in idle mode. When the quality (CPICH Ec/No measured by UE) of the serving cell is lower than this threshold plus the [Qqualmin] of the cell, the interfrequency cell reselection procedure will be started. This parameter is not configured when its value is 127. The intrafrequency cell reselection has a priority ADD higher than UCELLSELRESEL( the interOptional) frequency cell
BSC6900
Threshold for intrafrequency cell reselection in idle mode. When the quality (CPICH Ec/No measured by the UE) of the serving cell is lower than this threshold plus the [Qqualmin] of the cell, the intrafrequency cell reselection procedure will be started. This parameter is not configured when its value is 127. The intrafrequency cell reselection has a priority ADD higher than UCELLSELRESEL( the interOptional) frequency cell
IdleTbarred
BSC6900
This parameter is valid when [Cell barred indicator for SIB3] is BARRED. It indicates that the delay of the cell can be measured next time when [Cell barred indicator for SIB4] is set to BARRED. The greater the value, the lower the frequency of the UE trying to read the cell bar status. The smaller the value, the higher the frequency of the UE trying to read the cell bar ADD status. For UCELLACCESSST detailed WRFDRICT(Optional) information, 021103
IDLETMR
Timer_Idle
BSC6900
Interval of sending the Poll messages ADD when no data WRFDSAALLNK(Optional) is sent 050301
The timer length of anti pingpong IFAntiPingpan NCOV interfreq gTimerLength handover[s] BSC6900
After the coverage based handover succeeds, to avoid the handover of the UE to another frequency due to the following factors: overload, speed estimation, MBMS channel reselection, and QoS, frequent handovers occur. The RNC will start the interfrequency non-coverage based antiping-pong timer and prohibit the handover or SET measurement UHOCOMM(Option caused by the al) previous
WRFD01061006 WRFD01061204
IgorTmr
TigOR[ms]
BSC6900
CN flow control timer (short). The OVERLOAD message received SET repeatedly in UIUTIMERANDNU this period will WRFDM(Optional) be discarded. 010101
IMAGRPN
BSC6900
ADD FRALNK(Mandatory ) IMA group ADD IMAGRP(Mandatory ) ADD IMALNK(Mandatory ) BLK IMAGRP(Mandatory ) IMA group
None
IMAGRPN
BSC6900
None
IMAID
IMA ID
BSC6900
IMALNKN
BSC6900
ADD IMAGRP(Optional) IMA identifier STR IMATST(Mandatory ) ADD IMALNK(Mandatory ) BLK IMALNK(Mandatory IMA link ) number
None
WRFD050105 WRFD050304
IMAVER
BSC6900
ADD IMAGRP(Optional)
WRFD050105 WRFD050304
SET UFRC(Optional)
This parameter specifies whether it is allowed to use the initial rate of IMS signaling set on the LMT, that is, the value of [Ims initial rate]. - ON: If the IMS signaling is carried on the DCH, the maximum rate of IMS signaling takes the value of [Ims initial rate]. - OFF: The maximum rate of IMS signaling does not take the value of [Ims initial WRFDrate]. 010510
ImsChlType
BSC6900
This parameter specifies the channel type of IMS signaling. - DCH: Both uplink and downlink are preferably carried on DCH. - HSDPA: Uplink is preferably carried on DCH, and downlink is preferably carried on HSDSCH. - HSPA: Uplink is preferably carried on EDCH, and downlink is SET preferably UFRCCHLTYPEPA carried on HS- WRFDRA(Optional) DSCH. 010618
IMSGBR
BSC6900
The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_FACH state, this parameter determines the guaranteed speed of the MAC-c flow that sends ADD IMS data on UCELLEFACH(Opti the Iub WRFDonal) interface. 010688 The ADD maximum of UIMSISNAMAP(Ma one IMSI ndatory) range.
ImsiMax
BSC6900
WRFD021303
ImsiMin
BSC6900
BSC6900
SET UFRC(Mandatory)
This parameter specifies the initial access rate of IMS signaling. When the [Ims Bear enhanced switch] is ON: - If the IMS signaling is carried on the DCH in the downlink, the initial rate takes the larger value between this parameter and the CNassigned bit rate. - If the IMS signaling is carried on the HSPA, the MBR takes the larger value between this parameter and the CNassigned bit WRFDrate. 010510 Maximum of IMSI route parameter in Intra Domain NAS Node Selector(IDN NS). Minimum of IMSI route parameter in Intra Domain NAS Node Selector(IDN NS).
ImsiRtMax
BSC6900
WRFD021304 WRFD021311
ImsiRtMin
BSC6900
WRFD021304 WRFD021311
IMSMBR
BSC6900
The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_FACH state, this parameter determines the maximum speed of the MAC-c flow that sends ADD IMS data on UCELLEFACH(Opti the Iub WRFDonal) interface. 010688
Threshold For DPCCH InactThsForC Transmission Cycle ycle2 2[EDCH TTI] BSC6900
If no data is transmitted on the E-DCH for several consecutive EDCH TTIs, the interval at which two consecutive patterns are transmitted on the UL DPCCH should be changed from DtxCycle1 to DtxCycle2. Here, the value of DtxCycle2 is an integer multiple of the value of DtxCycle1. This parameter specifies the number of EDCH TTIs. For details, refer to the SET 3GPP TS UDTXDRXPARA(O 25.214 WRFDptional) protocol. 010686
This parameter specifies the number of consecutive subframes that the UE should monitor on each HSSCCH of the HS-SCCH set immediately after the data reception on the HS-SCCH or HSPDSCH. For details, refer SET to the 3GPP UDTXDRXPARA(O TS 25.214 WRFDptional) protocol. 010686 This parameter specifies the number of subframes that the UE should monitor on the E-AGCH of the serving radio link and on the ERGCH of each radio link after the data transmission on the EDCH. For details, refer SET to the 3GPP UDTXDRXPARA(O TS 25.321 ptional) protocol. ADD Infrared alarm EMU(Optional) switch
Inactivity Threshold for UE Grant InactThsForGr Monitoring[EDCH antMonitoring TTI] BSC6900 INFRA_RED_ Infrared alarm MASK switch BSC6900
WRFD010686 MRFD210304
INHTMR
Timer_NO-CREDIT BSC6900
Maximum allowed ADD duration WRFDSAALLNK(Optional) without credit 050301 The integrity protection algorithm supported by RNC. Only UIA1 is supported WRFDcurrently. 011401
BSC6900
SET UUIA(Optional)
BSC6900
The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_FACH state, this parameter determines the guaranteed speed of the MAC-c flow that sends interactive ADD service data UCELLEFACH(Opti on the Iub WRFDonal) interface. 010688
INTERACTM BR
BSC6900
The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_FACH state, this parameter determines the maximum speed of the MAC-c flow that sends interactive ADD service data UCELLEFACH(Opti on the Iub WRFDonal) interface. 010688
BSC6900
InterFreqCov HOThdEcN0
BSC6900
Threshold of signal quality of the target frequency for triggering interfrequency measurement . This parameter is used to set measurement control on the event 2C. The event 2C is triggered when the signal quality ADD of the target UCELLINTERFRE frequency is QHONCOV(Option above this WRFDal) threshold. 021200
BSC6900
Threshold to trigger interfrequency measurement with measurement quantity of Ec/No for CS domain services. The interfrequency measurement start Ec/No threshold (namely, compressed mode start threshold) is one of the key parameters in the interfrequency handover policy. This parameter affects the proportion of the UEs in SET compressed UINTERFREQHOC mode active OV(Optional) status of a ADD cell and the UCELLINTERFRE success rate WRFDQHOCOV(Optional) of the hard 020302
BSC6900
Threshold to trigger interfrequency measurement with measurement quantity of RSCP for CS domain services. The interfrequency measurement start RSCP threshold (namely, compressed mode start threshold) is one of the key parameters in the interfrequency handover policy. This parameter affects the proportion of the UEs in SET compressed UINTERFREQHOC mode active OV(Optional) status of a ADD cell and the UCELLINTERFRE success rate WRFDQHOCOV(Optional) of the hard 020302
BSC6900
Threshold to stop interfrequency measurement with measurement quantity of Ec/No for CS domain services. The interfrequency measurement stop Ec/No threshold (namely, compressed mode stop threshold) is one of the key parameters in the interfrequency handover policy. This parameter affects the proportion of the UEs in SET compressed UINTERFREQHOC mode active OV(Optional) status of a ADD cell and the UCELLINTERFRE success rate WRFDQHOCOV(Optional) of the hard 020302
BSC6900
Threshold to stop interfrequency measurement with measurement quantity of RSCP for CS domain services. The interfrequency measurement stop RSCP threshold (namely, compressed mode stop threshold) is one of the key parameters in the interfrequency handover policy. This parameter affects the proportion of the UEs in SET compressed UINTERFREQHOC mode active OV(Optional) status of a ADD cell and the UCELLINTERFRE success rate WRFDQHOCOV(Optional) of the hard 020302
BSC6900
This parameter is the relative threshold of cell for judging whether downlink MBDR algorithm of inter frequency is in overload state. It represents the percentage of the cell admission control threshold of downlink. The smaller this parameter is, the earlier downlink MBDR algorithm of inter frequency goes into overload ADD state. When UCELLMBDRINTE cell load is WRFDRFREQ(Optional) higher than 020302
SET UINTERFREQHOC OV(Optional) SET UINTERFREQHON COV(Optional) ADD UCELLINTERFRE QHOCOV(Optional) ADD UCELLINTERFRE QHONCOV(Option al) ADD UCELLMBDRINTE RFREQ(Optional)
L3 filtering coefficient for the interfrequency measurement . The physical meaning of this parameter is the same as the measurement model and intrafrequency measurement . The difference is that the report period for the interfrequency measurement is 480 ms, whereas the report period for the intrafrequency measurement is 200 ms. In practice, it can be adjusted according to
According to the cell interfrequency hierarchical selection, the RNC chooses the proper interfrequency measurement control parameters to implement coverage, speed estimation, and traffic absorption. INTER_FRE Q_COV: coveragebased interfrequency handover. INTER_FRE Q_COV_NC OV: coveragebased interfrequency handover, and noncoverageWRFDbased inter- 020302 frequency WRFDhandover 020303
BSC6900
Threshold to trigger interfrequency measurement with measurement quantity of Ec/No for PS domain HSPA services. The interfrequency measurement start Ec/No threshold (namely, compressed mode start threshold) is one of the key parameters in the interfrequency handover policy. This parameter affects the proportion of SET the UEs in UINTERFREQHOC compressed OV(Optional) mode active ADD status of a UCELLINTERFRE cell and the WRFDQHOCOV(Optional) success rate 020302
BSC6900
Threshold to trigger interfrequency measurement with measurement quantity of RSCP for PS domain HSPA services. The interfrequency measurement start RSCP threshold (namely, compressed mode start threshold) is one of the key parameters in the interfrequency handover policy. This parameter affects the proportion of SET the UEs in UINTERFREQHOC compressed OV(Optional) mode active ADD status of a UCELLINTERFRE cell and the WRFDQHOCOV(Optional) success rate 020302
BSC6900
Threshold to stop interfrequency measurement with measurement quantity of Ec/No for PS domain HSPA services. The interfrequency measurement stop Ec/No threshold (namely, compressed mode stop threshold) is one of the key parameters in the interfrequency handover policy. This parameter affects the proportion of SET the UEs in UINTERFREQHOC compressed OV(Optional) mode active ADD status of a UCELLINTERFRE cell and the WRFDQHOCOV(Optional) success rate 020302
BSC6900
Threshold to stop interfrequency measurement with measurement quantity of RSCP for PS domain HSPA services. The interfrequency measurement stop RSCP threshold (namely, compressed mode stop threshold) is one of the key parameters in the interfrequency handover policy. This parameter affects the proportion of SET the UEs in UINTERFREQHOC compressed OV(Optional) mode active ADD status of a UCELLINTERFRE cell and the WRFDQHOCOV(Optional) success rate 020302
Inter-freq and InterInterFreqInter RAT Meas Ctrl Info RatMeasInd Ind BSC6900
Indicating whether the interfrequency/RA T measurement control information should be delivered through the system information. When a UE in the CELL_FACH state receives the FACH measurement occasion info message and in the message the interfrequency FDD measurement indicator is set to TRUE, the UE performs interfrequency ADD measurement UCELLMEAS(Optio and cell WRFDnal) reselection 020102
BSC6900
Measurement quantity used in measurementbased interfrequency measurement in event (2C) triggered or periodical reporting mode. - CPICH: Common Pilot Channel - Ec/No: Signal-toNoise Ratio - RSCP: Received Signal Code Power CPICH_Ec/N o: to use the Ec/No measurement quantity for event 2C or InterFrequency periodical ADD measurement UCELLMBDRINTE . The physical WRFDRFREQ(Optional) unit is dB. 020302
BSC6900
SET UINTERFREQHOC OV(Optional) SET UINTERFREQHON COV(Optional) ADD UCELLINTERFRE QHOCOV(Optional) ADD UCELLINTERFRE QHONCOV(Option al)
Timer length for interfrequency measurement . After interfrequency measurement starts, if no interfrequency handover is performed when this timer expires, the interfrequency measurement and the compressed mode (if started) are stopped. The value 0 indicates the timer is not to be enabled. This parameter is used to prevent the long interfrequency measurement state
BSC6900
Timer length for interfrequency measurement . After interfrequency measurement starts, if no interfrequency handover is performed when this timer expires, the interfrequency measurement is stopped. In addition, the compressed mode is deactivated, if any. The value 0 indicates that the timer is not to be enabled. This parameter is used to ADD prevent the UCELLMBDRINTE long interWRFDRFREQ(Optional) frequency 020302 When it is checked, system supports interfrequency WRFDSET neighboring 020202 UNCELLDETECTS detect WRFDWITCH(Optional) function. 020203
BSC6900
BSC6900
Threshold of signal quality of the target frequency for triggering interfrequency measurement . This parameter is used to set measurement control on the event 2C. The event 2C is triggered when the signal quality of the target SET frequency is UINTERFREQHON above this WRFDCOV(Optional) threshold. 021200
BSC6900
Threshold to trigger interfrequency measurement with measurement quantity of Ec/No for PS domain nonHSPA services. The interfrequency measurement start Ec/No threshold (namely, compressed mode start threshold) is one of the key parameters in the interfrequency handover policy. This parameter affects the proportion of SET the UEs in UINTERFREQHOC compressed OV(Optional) mode active ADD status of a UCELLINTERFRE cell and the WRFDQHOCOV(Optional) success rate 020302
BSC6900
Threshold to trigger interfrequency measurement with measurement quantity of RSCP for PS domain nonHSPA services. The interfrequency measurement start RSCP threshold (namely, compressed mode start threshold) is one of the key parameters in the interfrequency handover policy. This parameter affects the proportion of SET the UEs in UINTERFREQHOC compressed OV(Optional) mode active ADD status of a UCELLINTERFRE cell and the WRFDQHOCOV(Optional) success rate 020302
BSC6900
Threshold to stop interfrequency measurement with measurement quantity of Ec/No for PS domain nonHSPA services. The interfrequency measurement stop Ec/No threshold (namely, compressed mode stop threshold) is one of the key parameters in the interfrequency handover policy. This parameter affects the proportion of SET the UEs in UINTERFREQHOC compressed OV(Optional) mode active ADD status of a UCELLINTERFRE cell and the WRFDQHOCOV(Optional) success rate 020302
BSC6900
Threshold to stop interfrequency measurement with measurement quantity of RSCP for PS domain nonHSPA services. The interfrequency measurement stop RSCP threshold (namely, compressed mode stop threshold) is one of the key parameters in the interfrequency handover policy. This parameter affects the proportion of SET the UEs in UINTERFREQHOC compressed OV(Optional) mode active ADD status of a UCELLINTERFRE cell and the WRFDQHOCOV(Optional) success rate 020302
Cell-level switch for interfrequency and inter-RAT handover. INTERFREQ: only measuring interfrequency cells and performing interfrequency handover. INTERRAT: only measuring GSM cells and performing inter-RAT handover . SIMINTERFR EQRAT: measuring both interfrequency and inter-RAT cells, performing interfrequency or inter-RAT
WRFD020302 WRFD020303
BSC6900
Interfrequency measurement report mode. PERIODICAL _REPORTIN G: periodical interfrequency measurement report EVENT_TRI GGER: eventtriggered interfrequency measurement report There are two interfrequency handover report modes in the RNC, namely, eventtriggered measurement report and periodical measurement SET report. The UINTERFREQHOC report mode OV(Optional) is selected by ADD setting the UCELLINTERFRE interWRFDQHOCOV(Optional) frequency 020302
BSC6900
Interfrequency measurement report mode. PERIODICAL _REPORTIN G: periodical interfrequency measurement report EVENT_TRI GGER: eventtriggered interfrequency measurement report There are two interfrequency handover report modes in the RNC, namely, eventtriggered measurement report and periodical measurement report. The report mode is selected by ADD setting the UCELLMBDRINTE interWRFDRFREQ(Optional) frequency 020302 This parameter is used to increase time of interfreqency reselection. It is not configured when its value is 255. For detailed ADD information, UCELLSELRESEL( refer to 3GPP WRFDOptional) TS 25.304. 010801
BSC6900
BSC6900
This parameter is the relative threshold of cell for judging whether uplink MBDR algorithm of inter frequency is in overload state. It represents the percentage of the cell admission control threshold of uplink. The smaller this parameter is, the earlier uplink MBDR algorithm of inter frequency goes into overload state. When cell load is ADD higher than UCELLMBDRINTE the product of WRFDRFREQ(Optional) uplink cell 020302
BSC6900
This parameter specifies whether interRAT handover of the UE SET among UOPERATORSHA different RINGMODE(Option operators is al) allowed.
BSC6900
This parameter specifies whether intraRAT handover of the UE SET among UOPERATORSHA different RINGMODE(Option operators is al) allowed. ADD UCELLMBDRINTE RRAT(Optional) MBDR switch Threshold to trigger interRAT measurement with measurement quantity of Ec/No for CS domain services. The interRAT measurement start RSCP threshold (namely, compressed mode start threshold) is one of the key parameters in the inter-RAT handover policy. This parameter affects the proportion of the UEs in compressed SET mode active UINTERRATHOCO status of a V(Optional) cell and the ADD success rate UCELLINTERRATH of the hard OCOV(Optional) handover. To
BSC6900
WRFD020303
BSC6900
WRFD020303
BSC6900
Threshold to trigger interRAT measurement with measurement quantity of RSCP for CS domain services. For CS domain services, when RSCP is used as the measurement quantity for inter-RAT measurement , the RNC sends the signaling to activate compressed mode and start interRAT measurement , if the UE SET reports the UINTERRATHOCO event 2D V(Optional) when the ADD measured UCELLINTERRATH value is WRFDOCOV(Optional) smaller than 020303
BSC6900
Threshold to stop interRAT measurement with measurement quantity of Ec/No for CS domain services. The interRAT measurement stop RSCP threshold (namely, compressed mode stop threshold) is one of the key parameters in the inter-RAT handover policy. This parameter affects the proportion of the UEs in compressed SET mode active UINTERRATHOCO status of a V(Optional) cell and the ADD success rate UCELLINTERRATH of the hard WRFDOCOV(Optional) handover. To 020303
BSC6900
Threshold to stop interRAT measurement with measurement quantity of RSCP for CS domain services. For CS domain services, when RSCP is used as the measurement quantity for inter-RAT measurement , the RNC sends the signaling to deactivate compressed mode and stop interRAT measurement , if the UE SET reports the UINTERRATHOCO event 2F V(Optional) when the ADD measured UCELLINTERRATH value is larger WRFDOCOV(Optional) than the value 020303
BSC6900
This parameter is the relative threshold of cell for judging whether downlink MBDR algorithm of inter RAT is in overload state. It represents the percentage of the cell admission control threshold of downlink. The smaller this parameter is, the earlier downlink MBDR algorithm of inter RAT goes into overload state. When cell load is ADD higher than UCELLMBDRINTE the product of WRFDRRAT(Optional) downlink cell 020303
BSC6900
SET UINTERRATHOCO V(Optional) SET UINTERRATHONC OV(Optional) ADD UCELLINTERRATH OCOV(Optional) ADD UCELLINTERRATH ONCOV(Optional) ADD UCELLMBDRINTE RRAT(Optional)
L3 filtering coefficient for inter-RAT measurement . The larger the value of this parameter, the stronger the smoothing effect and the higher the anti-fastfading capability, but the lower the signal change tracing capability. If the value of this parameter is set too small, unnecessary inter-system handovers may occur. The parameter has the same physical meaning and measurement model as the
The maximum number of attempts to perform noncoveragebased interRAT handovers. This parameter specifies the maximum number of attempts for the RNC to perform interRAT handovers after a noncoveragebased interRAT handover failure. The handover attempts should involve the SET target cells UINTERRATHONC that have not OV(Optional) been tried but ADD satisfy the UCELLINTERRATH handover ONCOV(Optional) conditions.
WRFD020305 WRFD020306
SET USMLC(Optional)
This parameter specifies whether the inter-RAT handover, for example, to the GSM network, is performed when the RNC cannot meet the accuracy requirements of the emergency calls for the LCS. This parameter enables emergency calls to obtain the LCS of significant accuracy in a different system.
BSC6900
Quality requirement for the interRAT cell during an inter-RAT handover with CS domain services. This parameter is used to set measurement control on the event 3C. The event 3C is triggered when the signal quality of the target frequency is above this threshold. Note that the value 0 indicates that the physical value is smaller than 110 dBm. If the periodical ADD report mode UCELLMBDRINTE is used, the WRFDRRAT(Optional) inter-RAT 020303 This parameter specifies the type of interRAT handover that is performed when the RNC cannot meet the accuracy requirements of the emergency calls for the LCS.
SET USMLC(Optional)
BSC6900
Threshold to trigger interRAT measurement with measurement quantity of Ec/No for HSDPA services. The interfrequency measurement start RSCP threshold (namely, compressed mode start threshold) is one of the key parameters in the inter-RAT handover policy. This parameter affects the proportion of the UEs in SET compressed UINTERRATHOCO mode active V(Optional) status of a ADD cell and the UCELLINTERRATH success rate WRFDOCOV(Optional) of the hard 020303
BSC6900
Threshold to trigger interRAT measurement with measurement quantity of RSCP for HSDPA services. For nonHSDPA services, when RSCP is used as the measurement quantity for inter-RAT measurement , the RNC sends the signaling to activate compressed mode and start interRAT measurement , if the UE SET reports the UINTERRATHOCO event 2D V(Optional) when the ADD measured UCELLINTERRATH value is WRFDOCOV(Optional) smaller than 020303
BSC6900
Threshold to stop interRAT measurement with measurement quantity of Ec/No for HSDPA services. The interRAT measurement stop RSCP threshold (namely, compressed mode stop threshold) is one of the key parameters in the inter-RAT handover policy. This parameter affects the proportion of the UEs in SET compressed UINTERRATHOCO mode active V(Optional) status of a ADD cell and the UCELLINTERRATH success rate WRFDOCOV(Optional) of the hard 020303
BSC6900
Threshold to stop interRAT measurement with measurement quantity of RSCP for HSDPA services. For HSDPA services, when RSCP is used as the measurement quantity for inter-RAT measurement , the RNC sends the signaling to deactivate compressed mode and stop interRAT measurement , if the UE reports the SET event 2F UINTERRATHOCO when the V(Optional) measured ADD value is larger UCELLINTERRATH than the value WRFDOCOV(Optional) of this 020303
SET UINTERRATHOCO V(Optional) SET UINTERRATHONC OV(Optional) ADD UCELLINTERRATH OCOV(Optional) ADD UCELLINTERRATH ONCOV(Optional)
Timer length for inter-RAT measurement . After interRAT measurement starts, if no inter-RAT handover is performed when this timer times out, the interRAT measurement is stopped. In addition, the compressed mode is deactivated, if any; If the value is 0, you can infer that the interRAT measurement timer is not started. To set this parameter, you need to consider the following factors:
Timer length for inter-RAT measurement . After interRAT measurement starts, if no inter-RAT handover is performed when this timer times out, the interRAT measurement is stopped. In addition, the compressed mode is deactivated, if any; If the value is 0, you can infer that the interRAT measurement timer is not started. To set this parameter, you need to ADD consider the UCELLMBDRINTE following WRFDRRAT(Optional) factors: 020303 When it is checked, system supports interrat SET neighboring UNCELLDETECTS detect WRFDWITCH(Optional) function. 020303
BSC6900
BSC6900
Quality requirement for the interRAT cell during an inter-RAT handover with CS domain services. This parameter is used to set measurement control on the event 3C. The event 3C is triggered when the signal quality of the target frequency is above this threshold. Note that the value 0 indicates that the physical value is smaller than SET 110 dBm. UINTERRATHONC If the OV(Optional) periodical ADD report mode UCELLINTERRATH is used, the ONCOV(Optional) inter-RAT
WRFD020305 WRFD020306
BSC6900
Quality requirement for the interRAT cell during an inter-RAT handover with PS domain services. This parameter is used to set measurement control on the event 3C. The event 3C is triggered when the signal quality of the target frequency is above this threshold. Note that the value 0 indicates that the physical value is smaller than SET 110 dBm. UINTERRATHONC If the OV(Optional) periodical ADD report mode UCELLINTERRATH is used, the ONCOV(Optional) inter-RAT
WRFD020305 WRFD020306
BSC6900
Interval that the UE reports interRAT measurement results to the RNC. In periodical report mode, the interval between two reports is the configured value. That is, the UE submits reports at intervals of the configured time. The value "NON_PERIO DIC_REPOR T" is, however, not SET recommende UINTERRATHOCO d. In this V(Optional) setting, the ADD UE behavior UCELLINTERRATH is not defined. OCOV(Optional) Because the ADD GSM RSSI UCELLMBDRINTE measurement RRAT(Optional) period is 480
WRFD020303 WRFD020309
BSC6900
SET UINTERRATHOCO V(Optional) SET UINTERRATHONC OV(Optional) ADD UCELLINTERRATH OCOV(Optional) ADD UCELLINTERRATH ONCOV(Optional)
Threshold of Inter-RAT handover failure due to physical channel failure. When the times of Inter-RAT handover failures due to physical channel failure exceeds the threshold, UE will be turned into penalty state. And no try of InterRat handover will be taken until penalty finishes. Also see parameter PenaltyTimeF orInterRatPhy ChFail.
WRFD020305 WRFD020306
Inter-RAT ping-pong hysteresis. When a UE in the CS domain is handed over from a 2G network to a 3G network, the system increase 3A Hysteresis to prevent UE ping-pong handover between the 2G network and the 3G network in the period specified by this parameter. During the penalty time, the previous periodical report will be SET changed to UINTERRATHOCO the event 3A V(Optional) report. If this ADD parameter is UCELLINTERRATH 0,the system WRFDOCOV(Optional) will not start 020303
Inter-RAT ping-pong timer. When a UE in the CS domain is handed over from a 2G network to a 3G network, the system increase 3A Hysteresis to prevent UE ping-pong handover between the 2G network and the 3G network in the period specified by this parameter. During the penalty time, the previous periodical report will be SET changed to UINTERRATHOCO the event 3A V(Optional) report. If this ADD parameter is UCELLINTERRATH 0,the system WRFDOCOV(Optional) will not start 020303
BSC6900
Threshold to trigger interRAT measurement with measurement quantity of Ec/No for PS domain nonHSDPA services. The interfrequency measurement start RSCP threshold (namely, compressed mode start threshold) is one of the key parameters in the inter-RAT handover policy. This parameter affects the proportion of SET the UEs in UINTERRATHOCO compressed V(Optional) mode active ADD status of a UCELLINTERRATH cell and the WRFDOCOV(Optional) success rate 020303
BSC6900
Threshold to trigger interRAT measurement with measurement quantity of RSCP for PS domain nonHSDPA services. For PS domain HSDPA services, when RSCP is used as the measurement quantity for inter-RAT measurement , the RNC sends the signaling to activate compressed mode and start interRAT SET measurement UINTERRATHOCO , if the UE V(Optional) reports the ADD event 2D UCELLINTERRATH when the WRFDOCOV(Optional) measured 020303
BSC6900
Threshold to stop interRAT measurement with measurement quantity of Ec/No for PS domain nonHSDPA services. The interRAT measurement stop RSCP threshold (namely, compressed mode stop threshold) is one of the key parameters in the inter-RAT handover policy. This parameter affects the proportion of SET the UEs in UINTERRATHOCO compressed V(Optional) mode active ADD status of a UCELLINTERRATH cell and the WRFDOCOV(Optional) success rate 020303
BSC6900
Threshold to stop interRAT measurement with measurement quantity of RSCP for PS domain nonHSDPA services. For PS domain nonHSDPA services, when RSCP is used as the measurement quantity for inter-RAT measurement , the RNC sends the signaling to deactivate compressed mode and stop interRAT SET measurement UINTERRATHOCO , if the UE V(Optional) reports the ADD event 2F UCELLINTERRATH when the WRFDOCOV(Optional) measured 020303
BSC6900
Inter-RAT measurement report mode. When PERIODICAL _REPORTIN G is selected, you can infer that periodical inter-RAT measurement report is adopted; when EVENT_TRI GGER is selected, you can infer that eventtriggered interRAT measurement report is adopted. The RNC includes two modes of the inter-RAT measurement SET report. The UINTERRATHOCO event V(Optional) triggered ADD report and the UCELLINTERRATH periodical WRFDOCOV(Optional) report are 020303
BSC6900
Inter-RAT measurement report mode. When PERIODICAL _REPORTIN G is selected, you can infer that periodical inter-RAT measurement report is adopted; when EVENT_TRI GGER is selected, you can infer that eventtriggered interRAT measurement report is adopted. The RNC includes two modes of the inter-RAT measurement report. The event triggered ADD report and the UCELLMBDRINTE periodical WRFDRRAT(Optional) report are 020303 This parameter is used to increase time of inter-RAT reselection. It is not configured when its value is 255. For detailed ADD information, UCELLSELRESEL( refer to 3GPP WRFDOptional) TS 25.304. 010801
BSC6900
BSC6900
This parameter is the relative threshold of cell for judging whether uplink MBDR algorithm of inter RAT is in overload state. It represents the percentage of the cell admission control threshold of uplink. The smaller this parameter is, the earlier uplink MBDR algorithm of inter RAT goes into overload state. When cell load is higher than the product of ADD uplink cell UCELLMBDRINTE admission WRFDRRAT(Optional) control 020303 Time span before the command is executed. The logs generated within the time span are to be MRFDEXP LOG(Optional) exported. 210305 Interval for sending STR packets to ETHOAMLOOPTS test Ethernet T(Optional) OAM loop None
INTERVAL
Relative Time
BSC6900
INTERVAL
BSC6900
This parameter specifies the Ec/No absolute threshold of event 1F in the SHO algorithm, correspondin g to the guarantee signal quality with QoS of basic service. The parameter affects the triggering of event 1F. Event 1F is used to trigger the emergency blind handover. If the best cell of the active set reports SET event 1F, UINTRAFREQHO( which means Optional) that the active ADD cell is very UCELLINTRAFRE poor quality, QHO(Optional) then the blind
BSC6900
This parameter specifies the RSCP absolute threshold of event 1F in the SHO algorithm, correspondin g to the guarantee signal strength with the QoS of basic service. The parameter affects the triggering of event 1F. Event 1F is used to trigger the emergency blind handover. If the best cell of the active SET set reports UINTRAFREQHO( event 1F, Optional) which means ADD that the active UCELLINTRAFRE cell is very QHO(Optional) poor quality,
BSC6900
According to the 3GPP TS 25.331, the filtering of the measurement value is calculated using the following formula, where k represents this parameter: Fn = (1 - a) * Fn - 1 + a * Mn a = (1/2)(k/2) Here, Fn: the updated filtered measurement result Fn - 1: the old filtered measurement result Mn: the latest received measurement result from physical layer measurement s
WRFD020202 WRFD020203
Identifying the period of the Intrafrequency load balance algorithm. When the cell load is high, the cell PCPICH TX power can be periodically reduced in order to enable users in connected mode to be SET switched over ULDCPERIOD(Opti to other cells onal) more easily, SET thus reducing USATLDCPERIOD( the local cell WRFDOptional) load. 020104
Indicating whether the intrafrequency measurement control information should be delivered through the system information. Generally the cell should deliver the intrafrequency measurement control information. When the intrafrequency measurement control information (the preconfigurati on of the measurement control) is delivered in ADD the system, UCELLMEAS(Optio the UE can WRFDnal) start the intra- 020102
BSC6900
This parameter specifies the intrafrequency measurement quantity. It defines the reference measurement quantity for the UE to report event 1x. For events 1A, 1B, 1C, and 1D which adopt relative thresholds, the measurement quantity does not have great impact on the threshold values. For event 1F which adopts SET absolute UINTRAFREQHO( threshold, the Optional) measurement ADD quantity UCELLINTRAFRE should be set QHO(Optional) based on the
WRFD020202 WRFD020203
BSC6900
When it is checked, system supports intrafrequency neighboring detect function. DETSET_RP RT_SWITCH switch in HoSwitch in SET CORRMALG OSWITCH can also start the intrafrequency neighboring detect function. Either switch is checked, the RNC starts the intrafrequency WRFDSET neighboring 020202 UNCELLDETECTS detect WRFDWITCH(Optional) function. 020203 Indicating whether the Neighboring ADD BSC is in the UIURGCONN(Man same datory) BSC6900. Relative SET threshold of USMLC(Mandatory) the event 1A.
IntraMbscInd
Intra-MBSC Indication.
BSC6900
WRFD070004 WRFD020801
BSC6900
This parameter specifies the CS non-VP service relative threshold of event 1A. The higher the threshold is, the more easily the event 1A is triggered. The lower the threshold is, the harder the event 1A is triggered. For the definition of event 1A, refer to 3GPP TS 25.331. The relative threshold can directly affect the ratio of the UE SET involved in UINTRAFREQHO( soft handover Optional) (SHO ratio). ADD So the UCELLINTRAFRE threshold QHO(Optional) should be
WRFD020202 WRFD020203
This parameter specifies the VP service relative threshold of event 1A. The higher the threshold is, the more easily the event 1A is triggered. The lower the threshold is, the harder the event 1A is triggered. For the definition of event 1A, refer to 3GPP TS 25.331. The relative threshold can directly affect the ratio of the UE involved in soft handover SET (SHO ratio). UINTRAFREQHO( So the Optional) threshold ADD should be UCELLINTRAFRE wisely chosen QHO(Optional) to achieve
WRFD020202 WRFD020203
PS service 1A event IntraRelThdFo relative r1APS threshold[0.5dB] BSC6900 IntraRelThdFo 1B Event Relative r1B Threshold[dB]
BSC6900
This parameter specifies the PS service relative threshold of event 1A. The higher the threshold is, the more easily the event 1A is triggered. The lower the threshold is, the harder the event 1A is triggered. For the definition of event 1A, refer to 3GPP TS 25.331. The relative threshold can directly affect the ratio of the UE involved in SET soft handover UINTRAFREQHO( (SHO ratio). Optional) So the ADD threshold UCELLINTRAFRE should be QHO(Optional) wisely chosen Relative SET threshold of USMLC(Mandatory) the event 1B.
This parameter specifies the CS non-VP service relative threshold of event 1B. The lower the threshold is, the more easily the event 1B is triggered. The higher the threshold is, the harder the event 1B is triggered. For the definition of event 1B, refer to 3GPP TS 25.331. The relative threshold can directly affect the ratio of the UE SET involved in UINTRAFREQHO( soft handover Optional) (SHO ratio). ADD So the UCELLINTRAFRE threshold QHO(Optional) should be
WRFD020202 WRFD020203
This parameter specifies the PS service relative threshold of event 1B. The lower the threshold is, the more easily the event 1B is triggered. The higher the threshold is, the harder the event 1B is triggered. For the definition of event 1B, refer to 3GPP TS 25.331. The relative threshold can directly affect the ratio of the UE involved in SET soft handover UINTRAFREQHO( (SHO ratio). Optional) So the ADD threshold UCELLINTRAFRE should be QHO(Optional) wisely chosen
WRFD020202 WRFD020203
This parameter specifies the PS service relative threshold of event 1B. The lower the threshold is, the more easily the event 1B is triggered. The higher the threshold is, the harder the event 1B is triggered. For the definition of event 1B, refer to 3GPP TS 25.331. The relative threshold can directly affect the ratio of the UE involved in SET soft handover UINTRAFREQHO( (SHO ratio). Optional) So the ADD threshold UCELLINTRAFRE should be QHO(Optional) wisely chosen
WRFD020202 WRFD020203
IntrTmr
TinTR[ms]
BSC6900
CN flow control timer (long). If the OVERLOAD message is not received in this period, the traffic SET volume will be UIUTIMERANDNU increased by WRFDM(Optional) a degree. 010101
INTV
Time Interval
BSC6900
Interval for executing the scheduled subtask. If the time mode is set to "DAILY_C", "WEEKLY_C" , or "MONTHLY_ C", you should set ADD this SUBTSK(Optional) parameter. None Automatic switchover interval. This parameter needs to be set only when "OMU automatic switchover switch" is set to "ON". The minimum automatic switchover interval is 30 days and the maximum automatic SET switchover ASWPARA(Mandat interval is ory) 1024 days. None EXP LOG(Optional) ADD SNTPSRVINFO(Ma ndatory) DLD LICENSE(Mandator y) ULD LICENSE(Mandator IP address of y) the server
INTV
IP
IP Address
BSC6900
MRFD210305 MRFD210403
IPADDR
Local IP address
BSC6900
IPADDR
IP address
BSC6900
WRFDThe local IP 050402 address must WRFDbe the 050403 configured IP WRFDaddress 050404 (including the MRFDIP address 211501 and port MRFDaddress of 211502 ADD the interface MRFDIPPATH(Mandatory) board). 211504 Local IP LOP address of VCL(Mandatory) the IPoA PVC None
IPADDR
IP address
BSC6900
MRFD211502 WRFD050402 WRFD050409 ADD IP address of WRFDDEVIP(Mandatory) the board 050410 ADD IPOAPVC(Mandato Local IP ry) address Local IP address of the Ethernet port
IPADDR
IP address
BSC6900
None
IPADDR
Local IP address
BSC6900
ADD ETHIP(Mandatory)
MRFD211502
IPADDR
BSC6900
Source IP address of the packet for ADD preventing ICMPGUARD(Mand the ICMP atory) attack None
IPADDR
BSC6900
ADD IP address of VLANID(Mandatory) the next hop None Local IP address of ADD the ETHTRKIP(Mandat aggregation ory) group None local IP SET address of VCLLOP(Optional) the IPoA PVC None
IPADDR
Local IP address
BSC6900
IPADDR
IP address
BSC6900
IPHC
Head compress
BSC6900
ADD PPPLNK(Optional)
IPHC
Head compress
BSC6900
ADD MPGRP(Optional)
IPINDEX
IP address index
BSC6900
ADD ETHIP(Mandatory)
IPINDEX
IP address index
BSC6900
BSC6900
None
IPLPN
BSC6900
BSC6900
Number of the logical port for the NodeB operation and maintenance channel in the ADD IP UNODEBIP(Mandat transmission ory) mode IP packet ADD multiplex IPMUX(Optional) index
MRFD210103 WRFD031101
IPSN
BSC6900
Slot number of the BSC6900 interface board interworking with NodeB when the NodeB operation and maintenance channel works in the ADD IP UNODEBIP(Mandat transmission WRFDory) mode 031101
IPSRN
BSC6900
Subrack number of the BSC6900 interface board interworking with NodeB when the NodeB operation and maintenance channel works in the ADD IP UNODEBIP(Mandat transmission ory) mode Indicating whether the Iub interface ADD supports IP UNODEB(Mandator hybrid y) transport.
WRFD050420 WRFD050412
BSC6900
WRFD050403
BSC6900
Indicating whether the UE allocated with Access Class 0 can be allowed to initiate access to the radio network. The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this ADD parameter, UCELLACCESSST refer to 3GPP WRFDRICT(Optional) TS 25.331. 021103
BSC6900
Indicating whether the UE allocated with Access Class 10 can be allowed to initiate access to the radio network.The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this ADD parameter, UCELLACCESSST refer to 3GPP WRFDRICT(Optional) TS 25.331. 021103 Indicating whether the UE allocated with Access Class 11 can be allowed to initiate access to the radio network.The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this ADD parameter, UCELLACCESSST refer to 3GPP WRFDRICT(Optional) TS 25.331. 021103
BSC6900
BSC6900
Indicating whether the UE allocated with Access Class 12 can be allowed to initiate access to the radio network. The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this ADD parameter, UCELLACCESSST refer to 3GPP WRFDRICT(Optional) TS 25.331. 021103 Indicating whether the UE allocated with Access Class 13 can be allowed to initiate access to the radio network.The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this ADD parameter, UCELLACCESSST refer to 3GPP WRFDRICT(Optional) TS 25.331. 021103
BSC6900
BSC6900
Indicating whether the UE allocated with Access Class 14 can be allowed to initiate access to the radio network.The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this ADD parameter, UCELLACCESSST refer to 3GPP WRFDRICT(Optional) TS 25.331. 021103 Indicating whether the UE allocated with Access Class 15 can be allowed to initiate access to the radio network. The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this ADD parameter, UCELLACCESSST refer to 3GPP WRFDRICT(Optional) TS 25.331. 021103
BSC6900
BSC6900
Indicating whether the UE allocated with Access Class 1 can be allowed to initiate access to the radio network.The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this ADD parameter, UCELLACCESSST refer to 3GPP WRFDRICT(Optional) TS 25.331. 021103 Indicating whether the UE allocated with Access Class 2 can be allowed to initiate access to the radio network. The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this ADD parameter, UCELLACCESSST refer to 3GPP WRFDRICT(Optional) TS 25.331. 021103
BSC6900
BSC6900
Indicating whether the UE allocated with Access Class 3 can be allowed to initiate access to the radio network. The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this ADD parameter, UCELLACCESSST refer to 3GPP WRFDRICT(Optional) TS 25.331. 021103 Indicating whether the UE allocated with Access Class 4 can be allowed to initiate access to the radio network. The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this ADD parameter, UCELLACCESSST refer to 3GPP WRFDRICT(Optional) TS 25.331. 021103
BSC6900
BSC6900
Indicating whether the UE allocated with Access Class 5 can be allowed to initiate access to the radio network. The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this ADD parameter, UCELLACCESSST refer to 3GPP WRFDRICT(Optional) TS 25.331. 021103 Indicating whether the UE allocated with Access Class 6 can be allowed to initiate access to the radio network. The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this ADD parameter, UCELLACCESSST refer to 3GPP WRFDRICT(Optional) TS 25.331. 021103
BSC6900
BSC6900
Indicating whether the UE allocated with Access Class 7 can be allowed to initiate access to the radio network.The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this ADD parameter, UCELLACCESSST refer to 3GPP WRFDRICT(Optional) TS 25.331. 021103 Indicating whether the UE allocated with Access Class 8 can be allowed to initiate access to the radio network.The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this ADD parameter, UCELLACCESSST refer to 3GPP WRFDRICT(Optional) TS 25.331. 021103
BSC6900
BSC6900
Indicating whether the UE allocated with Access Class 9 can be allowed to initiate access to the radio network.The UE judges whether it belongs to this access class based on the SIM/USIM. For detailed information of this ADD parameter, UCELLACCESSST refer to 3GPP WRFDRICT(Optional) TS 25.331. 021103 Whether to indicate the first class ADD transport RSCGRP(Mandator resource y) group
WRFD050406
BSC6900
This parameter specifies whether the MAC-hs window size is fixed. - If this parameter is set to TRUE, the MAC-hs window size is fixed. - If this parameter is set to FALSE, the MAC-hs window size WRFDis flexible. 010510
BSC6900
Primary operator flag. YES indicates to activate the license of the primary operator, and NO indicates to activate the license of the SET secondary MRFDLICENSE(Optional) operator. 210403
ISQOSPATH
IS QOSPATH
BSC6900
WRFD031101
BSC6900
Whether to indicate it is the root node when the ADD transport type ADJNODE(Mandat is ATM or WRFDory) ATM_IP 05030104 Whether to support the FRA (E1/T1 frame relay interface ADD BRD(Optional) board)
BSC6900
MRFD210301
ITFT
Interface Type
BSC6900
ADD IPPATH(Mandatory) ADD ADJMAP(Mandator y) ADD Type of the TRMMAP(Mandator adjacent y) node
BSC6900
When the Iu interface is faulty, the RNC gradually restricts cell access in Bar mode. When the Iu interface is restored, the RNC gradually enables cell access in Not Bar mode. This parameter defines the interval between the cell working in Bar mode and in Not Bar mode. In this way, the location update procedure can be distributed to a specified SET time period UACALGO(Optional and the risk WRFD) due to 021103 Meaning: Number of RABs selected in one DL traffic release. One RAB ADD represents UNODEBOLC(Opti one service of WRFDonal) a single user. 020107 Number of RABs ADD selected in UNODEBOLC(Opti one UL traffic WRFDonal) release. 020107
BSC6900
BSC6900
BSC6900
IUCTHD
SET A timer to Iu USTATETIMER(Op CS Release tional) protection Maximum traffic rate for restriction in the case of congestion on the IU interface. This parameter is valid only when "Board SET Class" is FCSW(Optional) "XPU". Whether to control signaling SET traffic on the FCSW(Optional) IU interface SET A timer to Iu USTATETIMER(Op PS Release tional) protection Indicating whether to support congestion control over Iur interface of the Neighboring RNC.
WRFD010101
WRFD040100
IUFCSW
BSC6900
WRFD040100 WRFD010101
BSC6900
Congestion Control IurCongCtrlSu Indicator over IUR ppInd for NRNC BSC6900
ADD UNRNC(Optional)
WRFD02060501
IURDLCTHD
BSC6900
CPU usage threshold for Iur downlink flow control. When the average CPU usage of sliding windows reaches or exceeds the threshold, flow control is SET triggered on FCCPUTHD(Option the Iur WRFDal) downlink. 040100
IURDLCTHD
BSC6900
Packet queue usage threshold for Iur downlink flow control. When the average packet queue usage of sliding windows reaches or exceeds the threshold, flow control is SET triggered on FCMSGQTHD(Opti the Iur WRFDonal) downlink. 040100 CPU usage threshold for recovery from Iur downlink flow control. When the average CPU usage of sliding windows is lower than the threshold, flow control SET on the Iur FCCPUTHD(Option downlink is WRFDal) stopped. 040100
IURDLRTHD
BSC6900
IURDLRTHD
BSC6900
Packet queue usage threshold for recovery from Iur downlink flow control. When the average packet queue usage of sliding windows is lower than the threshold, flow control SET on the Iur FCMSGQTHD(Opti downlink is WRFDonal) stopped. 040100 Whether to control the traffic on the Iur downlink
IURDLSW
SET FCSW(Optional)
WRFD040100
IurExistInd
BSC6900
IURGCTHD
BSC6900
CPU usage threshold for Iur-g interface control. When the average CPU usage of sliding windows reaches or exceeds the threshold, resource SET auditing FCCPUTHD(Option control is WRFDal) triggered. 040100
IURGCTHD
BSC6900
Packet queue usage threshold for Iur-g interface. When the average packet queue usage of sliding windows reaches or exceeds the threshold, IurSET g interface FCMSGQTHD(Opti flow control is WRFDonal) triggered. 040100 CPU usage threshold for recovery from Iur-g interface control. When the average CPU usage of sliding windows is lower than the threshold, IurSET g interface FCCPUTHD(Option control is WRFDal) stopped. 040100 Packet queue usage threshold for recovery from Iur-g interface. When the average packet queue usage of sliding windows is lower than the threshold, IurSET g interface FCMSGQTHD(Opti control is WRFDonal) stopped. 040100
IURGRTHD
BSC6900
IURGRTHD
BSC6900
IURGSW
BSC6900
SET FCSW(Optional)
Whether to control traffic on the Iur-g WRFDinterface 040100 Indicates whether to support Hsdpa over Iur interface of the Neighboring RNC. Indicates whether to support Hsupa over Iur interface of the Neighboring RNC.
IurHsdpaSupp Hsdpa cap ind over Ind IUR for NRNC BSC6900
ADD UNRNC(Optional)
WRFD010651
IurHsupaSupp Hsupa cap ind over Ind IUR for NRNC BSC6900
ADD UNRNC(Optional)
WRFD010635
IURULCTHD
BSC6900
CPU usage threshold for Iur uplink flow control. When the average CPU usage of sliding windows reaches or exceeds the threshold, SET flow control is FCCPUTHD(Option triggered on WRFDal) the Iur uplink. 040100
IURULCTHD
BSC6900
Packet queue usage threshold for Iur uplink flow control. When the average packet queue usage of sliding windows reaches or exceeds the threshold, SET flow control is FCMSGQTHD(Opti triggered on WRFDonal) the Iur uplink. 040100 CPU usage threshold for recovery from Iur uplink flow control. When the average CPU usage of sliding windows is lower than the threshold, flow control SET over on the FCCPUTHD(Option Iur uplink is WRFDal) stopped. 040100 Packet queue usage threshold for recovery from Iur uplink flow control. When the average packet queue usage of sliding windows is lower than the threshold, flow control SET over on the FCMSGQTHD(Opti Iur uplink is WRFDonal) stopped. 040100
IURULRTHD
BSC6900
IURULRTHD
BSC6900
IURULSW
BSC6900
BSC6900
Whether to control the SET traffic on the FCSW(Optional) Iur uplink How the RNC state is affected by the Iu interface service state. If the value is NONE, the RNC state is independent of the Iu interface state(faulty or recovery). If the value is IUCS, the RNC state is considered to be faulty when Iu CS interface is faulty. If the value is IUPS, the RNC state is considered to be faulty when Iu PS interface is faulty. If the value is IUCS_IUPS, ADD the RNC URNCPOOL(Option state is al) considered to
WRFD040100
BSC6900
SET OPT(Mandatory)
SET OPT(Mandatory)
None
J0RXT
BSC6900
Expected receiving type SET OPT(Optional) of J0 None Expected receiving value of J0. J0 byte, also called the trace byte of the regenerator section on the optical port (RTIM), is one of the optical port interconnectio n parameters. The BSC receives the peer J0 byte SET OPT(Optional) continuously. None
J0RXVALUE
BSC6900
SET OPT(Mandatory)
None
J0TXT
J0 transmit type
BSC6900
J0TXVALUE
J0 transmit value
BSC6900
Sending value of J0. J0 byte, also called the trace byte of the regenerator section on the optical port (RTIM), is one of the optical port interconnectio n parameters that is continuously transmitted to the peer end. This parameter enables the peer end to check whether it is connected to the local end SET OPT(Optional) continuously. None
J0TYPE
J0 type
BSC6900
None
BSC6900
SET OPT(Mandatory)
None
SET OPT(Mandatory)
None
J1RXT
BSC6900
J1RXVALUE
BSC6900
Expected receiving value of J1. J1 byte, also called the trace byte of the high-order path on the optical port, is one of the optical port interconnectio n parameters. The local end continuously receives the SET OPT(Optional) peer J1 byte. None
SET OPT(Mandatory)
None
J1TXT
J1 transmit type
BSC6900
J1TXVALUE
J1 transmit value
BSC6900
Sending value of J1. J1 byte, also called the trace byte of the high-order path on the optical port, is one of the optical port interconnectio n parameters transmitted to the peer end continuously. This parameter enables the peer end to check whether it is connected to the local end SET OPT(Optional) continuously. None
J1TYPE
J1 type
BSC6900
None
Switch for the J2 tracing SET mark COPTLNK(Optional mismatching ) alarm None SET COPTLNK(Optional Byte display ) format of J2
BSC6900
None
J2MODE
J2 length
BSC6900
SET COPTLNK(Optional Byte length of WRFD) J2 05030102 SET Expected COPTLNK(Optional receiving ) value of J2
J2RXVALUE
BSC6900
WRFD05030102
J2TXVALUE
J2 transmit value
BSC6900
None
JAUTOADD
A zero or a space used to fill in the J byte of the optical port based on the J byte of the peer equipment. If the J bytes are inconsistent, an alarm related to J byte mismatch will be reported and the negotiation of the optical port may fail, thus leading SET OPT(Optional) to SET deterioration COPTLNK(Optional of the ) services. None Determines whether the last three bits of K2 indicates the single end and the dual SET MSP(Optional) end None ADD PPPLNK(Optional) ADD MPLNK(Optional) Duration of the PPP/MP link keepalive timer
K2MODE
K2 Mode
BSC6900
KEEPALIVE
BSC6900
None
KEEPTMR
Timer_Keep-Alive
BSC6900
Timer of waiting for STAT response ADD from the peer WRFDSAALLNK(Optional) end 050301
BSC6900
The period of KPI alarm SET check,it's the UKPIALMTHD(Opti times of KPI WRFDonal) report period. 010510
BSC6900
SET RRC Report UKPIALMTHD(Opti KPI Alarm onal) Switch ADD ULASNAMAP(Mand atory) ADD UCZ(Mandatory) ADD UEXT3GCELL(Man datory) ADD UEXT2GCELL(Man datory) ADD UCELLSETUP(Man datory) ADD ULAC(Mandatory) ADD UCELLQUICKSET UP(Mandatory) ADD URAC(Mandatory) ADD USAC(Mandatory)
WRFD010510
LAC
Identifying a location area code for a PLMN of GSM-MAP type. It is defined by the operator. For detailed information of this parameter, refer to 3GPP TS 23.003.
WRFD010101 WRFD021301
LACPMODE
Aggregation Mode
BSC6900
Aggregation mode. When this parameter is set to static aggregation, the LACP protocol is activated; otherwise, the ADD LACP ETHTRK(Mandator protocol is y) deactivated. None
LATITUDE
BSC6900
ADD GPS(Mandatory)
Longitude of the GPS receiver antenna Longitude of the GPS receiver antenna
MRFD210502
BSC6900
ADD GPS(Mandatory)
MRFD210502
LATPRD
BSC6900
Delay statistics period. This parameter indicates the period to collect the statistics information about the link transmission delay. Note that the unit of this parameter is 100 milliseconds. The actual delay statistics period is the value of this parameter ADD multiplied by IPLOGICPORT(Opt 100 MRFDional) milliseconds. 210103
LATSUSTM
BSC6900
Number of delay adjustment suspension periods. This parameter specifies the delay statistics periods in which the bandwidth is not adjusted when the bandwidth adjustment function of the logical port is triggered due to the change of the link transmission delay. This parameter can be used to control the rate of the bandwidth ADD adjustment at IPLOGICPORT(Opt the logical ional) port. None Bandwidth reduction delay threshold. This parameter is used to trigger the function of bandwidth reduction at the logical port when the link delay ADD exceeds the IPLOGICPORT(Opt value of this ional) parameter. None
LATTH
BSC6900
LATUDK
average delay down filter mantissa BSC6900 average delay up filter mantissa
LATUPK
BSC6900
Average delay reduction filtering index None Average delay increase filtering index None
LCARRYT
BSC6900
ADD VPCLCX(Mandator y) Link type Length of smoothing filter window SET of intraULDM(Optional) frequency SET load USATLDM(Optional balancing ) (LDB).
None
BSC6900
WRFD020102
This parameter specifies which choice the load balancing DRD algorithm will be applied. - Power: Power(Downli nk noneHSDPA power is used for DCH services, and downlink HSDPA guarantee power is used for HSDPA services) will be applied to the load balancing DRD algorithm. UserNumber: User number(Dow nlink R99 ADD equivalent UCELLDRD(Option user number WRFDal) is used for 020400
SET UDRD(Optional)
This parameter specifies which choice the load balancing DRD algorithm will be applied. - Power: Power(Downli nk noneHSDPA power is used for DCH services, and downlink HSDPA guarantee power is used for HSDPA services) will be applied to the load balancing DRD algorithm. UserNumber: User number(Dow nlink R99 equivalent user number WRFDis used for 020400
Dl load balance LdbDRDLoad DRD power remain RemainThdD threshold for CH DCH[%] BSC6900
This parameter specifies the downlink load threshold to trigger load balancing DRD for DCH services. The load balancing DRD will probably be triggered only when the downlink remanent non H power or remanent R99 equivalent user number ADD of the cell is UCELLDRD(Option less than this WRFDal) threshold. 020400 This parameter specifies the downlink load threshold to trigger load balancing DRD for DCH services. The load balancing DRD will probably be triggered only when the downlink remanent non H power or remanent R99 equivalent user number of the cell is less than this WRFDthreshold. 020400
Dl load balance LdbDRDLoad DRD power remain RemainThdD threshold for CH DCH[%] BSC6900
SET UDRD(Optional)
Dl load balance LdbDRDLoad DRD power remain RemainThdH threshold for SDPA HSDPA[%] BSC6900
This parameter specifies the downlink load threshold to trigger load balancing DRD for HSDPA services. The load balancing DRD will probably be triggered only when the downlink remanent HSDPA guarantee power or remanent HSDPA user number of the ADD cell is less UCELLDRD(Option than this WRFDal) threshold. 01061112
Dl load balance LdbDRDLoad DRD power remain RemainThdH threshold for SDPA HSDPA[%] BSC6900
SET UDRD(Optional)
This parameter specifies the downlink load threshold to trigger load balancing DRD for HSDPA services. The load balancing DRD will probably be triggered only when the downlink remanent HSDPA guarantee power or remanent HSDPA user number of the cell is less than this WRFDthreshold. 01061112
SET UDRD(Optional)
This parameter specifies the threshold of remanent load offset between the current cell and the target cell when load balancing DRD is applied for DCH users. Only when the remanent load offset reaches this threshold can a neighboring cell be selected as a candidate DRD cell for DCH users.(If Load balance DRD choice is Power, additional condition should also be satisfied, that is total WRFDpower remain 020400
SET UDRD(Optional)
This parameter specifies the threshold of remanent load offset between the current cell and the target cell when load balancing DRD is applied for HSDPA users. Only when the remanent load offset reaches this threshold can a neighboring cell be selected as a candidate DRD cell for HSDPA users.(If Load balance DRD choice is Power, additional condition should also WRFDbe satisfied, 01061112
This parameter specifies whether the load balancing DRD algorithm will be applied for DCH services. - ON: The load balancing DRD algorithm will be applied. - OFF: The load balancing DRD ADD algorithm will UCELLDRD(Option not be WRFDal) applied. 020400
SET UDRD(Optional)
This parameter specifies whether the load balancing DRD algorithm will be applied for DCH services. - ON: The load balancing DRD algorithm will be applied.(If cell-level DRD parameters are configured, the status of cell level Load balance DRD switch for DCH should also be considered.) - OFF: The load balancing DRD WRFDalgorithm will 020400
This parameter specifies whether the load balancing DRD algorithm will be applied for HSDPA services. - ON: The load balancing DRD algorithm will be applied. - OFF: The load balancing DRD ADD algorithm will UCELLDRD(Option not be WRFDal) applied. 01061112
SET UDRD(Optional)
This parameter specifies whether the load balancing DRD algorithm will be applied for HSDPA services. - ON: The load balancing DRD algorithm will be applied.(If cell-level DRD parameters are configured, the status of cell level Load balance DRD switch for HSDPA should also be considered.) - OFF: The load balancing DRD WRFDalgorithm will 01061112
Load balance DRD LdbDRDTotal total power protect PwrProThd threshold[%] BSC6900
SET UDRD(Optional)
This parameter specifies the threshold of the downlink remanent total power difference between the current cell and the target cell when load balancing DRD is applied and the load balancing DRD choice is Power. Only when the downlink remanent total power difference is less than this threshold can a neighboring cell be selected as a candidate DRD cell. (Another condition is WRFDthat remanent 020400
LdcSwitch
BSC6900
Value range: NODEB_CRE DIT_LDR_S WITCH (NodeB Credit LDR Switch), LCG_CREDI T_LDR_SWI TCH (Local Cell Group Credit LDR Switch), LC_CREDIT_ LDR_SWITC H (Local Cell Credit LDR Switch) Content: The values above represent the following algorithms: NODEB_CRE DIT_LDR_S WITCH: NodeB credit congestion control algorithm. This is an RNC-oriented SET algorithm. ULDCALGOPARA( When NodeB WRFDOptional) creadit load is 020106 Inquiring load ADD of GSM cell UEXT2GCELL(Man when the WRFDdatory) switch is on. 020310
BSC6900
BSC6900
FALSE means not considering the code priority during the code reshuffling. TRUE means considering the code priority during the code reshuffling. If the parameter is TRUE, the codes with high priority are reserved during the code reshuffling. It is good for the code resource dynamic sharing, which is a function used ADD for the UCELLLDR(Option HSDPA WRFDal) service. 020106
BSC6900
Code resource usage difference threshold. Interfrequency handover is triggered when the difference of the resource usage of the current cell and that of the target cell ADD is greater UCELLLDR(Option than this WRFDal) threshold. 020106
LdrFirstPri
If congestion is triggered by multiple resources such as credit and code at the same time, the congestion of resources specified in this parameter is processed with the first priority. IUBLDR refers to processing of LDR action trigged by Iub bandwidth. CREDITLDR refers to processing of LDR action trigged by credit. CODELDR refers to processing of LDR action SET trigged by ULDCALGOPARA( code. UULDR WRFDOptional) refers to 020106
LdrFourthPri
BSC6900
If congestion is triggered by multiple resources such as credit and code at the same time, the congestion of resources specified in this parameter is processed with the fourth priority. IUBLDR refers to processing of LDR action trigged by Iub bandwidth. CREDITLDR refers to processing of LDR action trigged by credit. CODELDR refers to processing of LDR action SET trigged by ULDCALGOPARA( code. UULDR WRFDOptional) refers to 020106
BSC6900
Identifying the period of the LDR execution. When basic congestion occurs, execution of LDR can dynamically reduce the cell load. The lower the parameter value is, the more frequently the LDR action is executed, which decreases the load quickly. If the parameter value is excessively low, an LDR action may overlap the SET previous one ULDCPERIOD(Opti before the onal) previous SET result is USATLDCPERIOD( displayed in WRFDOptional) LDM. The 020106
BSC6900
If congestion is triggered by multiple resources such as credit and code at the same time, the congestion of resources specified in this parameter is processed with the second priority. IUBLDR refers to processing of LDR action trigged by Iub bandwidth. CREDITLDR refers to processing of LDR action trigged by credit. CODELDR refers to processing of SET LDR action ULDCALGOPARA( trigged by WRFDOptional) code. UULDR 020106
LdrThirdPri
If congestion is triggered by multiple resources such as credit and code at the same time, the congestion of resources specified in this parameter is processed with the third priority. IUBLDR refers to processing of LDR action trigged by Iub bandwidth. CREDITLDR refers to processing of LDR action trigged by credit. CODELDR refers to processing of LDR action SET trigged by ULDCALGOPARA( code. UULDR WRFDOptional) refers to 020106
LEI
BSC6900
ADD Path load EQ LOADEQ(Mandator threshold WRFDy) table index 050404 Bronze user load EQ index used by the ADD current ADJMAP(Mandator adjacent y) node
LEIBRZ
BSC6900
WRFD021305 WRFD050424
LEIGLD
Gold user load EQ index used by the ADD current ADJMAP(Mandator adjacent y) node Silver user load EQ index used by the ADD current ADJMAP(Mandator adjacent y) node ADD M3LE(Mandatory) ADD M3DE(Mandatory)
WRFD021305 WRFD050424
LEISLV
WRFD021305 WRFD050424
LENO
BSC6900
The local entity number uniquely identifies a WRFDlocal entity. 050409 MRFD210305
LEVEL
Log Level
BSC6900
LEVEL LEVEL
Log Level
BSC6900
Log level to COL LOG(Optional) be collected. SET Alarm mask ALMML(Mandatory) switch
None None
Level
MD LEVEL
BSC6900
ADD ETHMD(Optional)
BSC6900
Fractional link number correspondin ADD g with the low VPCLCX(Optional) end port None
BSC6900
Logical function type of the board OAM:Operati on And Maintenance Process UCP:All the UCP subsystems are configured as CPUS to act as the control plane processing subsystems for UMTS BSC RUCP:Subsy stem 0 of RUCP is configured as the MPU subsystem to act as the resource management subsystem. The other seven subsystems are configured as MRFDADD BRD(Optional) CPUS to act 210301
Logical function type of the board UCP:All the UCP subsystems are configured as CPUS to act as the control plane processing subsystems for UMTS RNC RUCP:Subsy stem 0 of RUCP is configured as the MPU subsystem to act as the resource management subsystem. The other subsystems are configured as CPUS to act CON as the control PATCH(Optional) plane LOD processing PATCH(Optional) subsystems LOD BRD(Optional) for UMTS ADD Logical PPPLNK(Optional) function type ADD Logical MPGRP(Optional) function type
BSC6900
The occur threshold of 20258 SET alarm,you can LICALMTHD(Mand set it from MRFDatory) 90% to 99% 210304
BSC6900
The recover threshold of 20258 SET alarm,you can LICALMTHD(Mand set it from MRFDatory) 90% to 99% 210304 IMA group ADD number of the VPCLCX(Optional) low end port None DL SF threshold to limit CM. When DL SF limit CM indicator is TRUE, if the downlink spreading factor is less than or equal to this parameter value, the active set quality measurement is not allowed and CM function should be deactivated. When DL SF limit CM ind is TRUE, if CM is activated, the downlink spreading factor should be greater than this SET parameter UCMCF(Mandatory) value.
LIMAGRPN
BSC6900
WRFD020303 WRFD020302
BSC6900
LL
Lower Limit
BSC6900
When the BE service rate decreases to the DCCC threshold rate, the UE, however, cannot perform state transition to FACH state because, for example, the state transition switch is OFF or there are CS services. In this case, when traffic remains low for quite a long period, the service rate decreases to this rate and D2F state transition is not performed. The timer parameters SET and traffic UDCCC(Optional) volume SET Lower limit for ALMPORT(Optional triggering an ) alarm
WRFD021101 MRFD210304
LLCN
Channel No.
BSC6900
The loopback channel number when the port loopback mode is set to single SET channel local E1T1LOP(Optional) loopback None
LNKNUMMO DE
Tributary Numbering
BSC6900
Optical port tributary numbering method. This parameter indicates the sequence of tributaries in an SDH frame. If the sequences of tributaries at both optical ports differ from each other, some E1 links will be disconnected. The sequences of optical port tributaries for three modes are as follows: ALCATEL_M ODE:(1,2,3,4, 5,6,7,8,9,10,1 1,12,13,14,15 ,16,17,18,19, 20,21,22,23,2 4,25,26,27,28 ,29,30,31,32, SET OPT(Optional) 33,34,35,36,3 None
ADD M3LNK(Optional)
Initial bearing tag of the M3UA link. This parameter can be set to either active mode or standby mode. For details about the relevant bearer tag, see the the parameter "Traffic mode" of the "ADD WRFDM3LKS". 050409
Link load sharing. In the value, the number of 1s (represented by n) determines the maximum number (2^n) of links for the load sharing. For example, B0000 indicates that up to one link is used for the load sharing, B0001 and B1000 indicate that up to two links are used for the load sharing. The additional links are not used for the load sharing. The AND operation between this value and " ADD signaling WRFDMTP3LKS(Optional) route mask " 050301
ADD M3LKS(Optional)
Signaling link mask correspondin g to the M3UA link set. It is used for the M3UA link load sharing. It is valid only when the working mode of the signaling link set is set to load sharing. In the value, the number of 1s (represented by n) determines the maximum number (2^n) of links for the load sharing. For example, B0000 indicates that up to one link is used for the load sharing, B0001 and WRFDB1000 050409
LNKT
Link type
BSC6900
LOP VCL(Mandatory)
LNKT
Link type
BSC6900
None
Load-base handover based on LoadHoOn3G 3G2G load 2GldInd difference Indication BSC6900
If the switch is ON, the load difference between 3G cell and target 2G cell will be considered during the load-base handover. If the switch is OFF, the load difference between 3G SET cell and 2G UMBSCCRRM(Opti cell will not be onal) considered.
WRFD211404 WRFD070004
LOCALIP
Local IP address
BSC6900
Local IP address of PPP link. The IP address of ADD the PPP link PPPLNK(Mandatory on the BSC ) side. None
LOCALIP
Local IP address
BSC6900
ADD Local IP MPGRP(Mandatory address of ) the MP group None STR IPLOPTST(Mandat Local IP ory) address
LOCALIP
Local IP address
BSC6900
None
LoCell
Local cell ID
BSC6900
BSC6900
Uniquely identifying a local cell. For detailed information of this parameter, refer to 3GPP TS 25.401. The value of this parameter can include one or two conditions. "&" is used to concatenate the conditions, and the records are obtained when the two conditions are matched. Conditions are written in the format of "name : value". "name" is the key of location information, "value" is the value of location information. Both "name" and "value" EXP are case ALMLOG(Optional) sensitive. STA For example: ALMLOG(Optional) 1. If you need
WRFD010101
MRFD210304
LOCIP1
BSC6900
Identifies the first local IP address that communicate s with the peer end. When it is set to 0, it is invalid. This IP address must be first configured on the ADD correspondin SCTPLNK(Mandato g interface ry) board. Identifies the second local IP address that communicate s with the peer end. When it is set to 0, it is invalid. This IP address must be first configured on the ADD correspondin SCTPLNK(Optional g interface ) board. Whether to lock all the SET non-default OPLOCK(Mandator local y) accounts
LOCIP2
BSC6900
WRFD050402 WRFD050404
LOCKST
MRFD210305
LOCPN
BSC6900
ADD SCTPLNK(Mandato Local SCTP ry) port number SET LODCTRL(Mandato Board start ry) load control
WRFD050402 WRFD050404
LODCTRL
BSC6900
MRFD210301
LOGCTHD
BSC6900
CPU usage threshold for log flow control. When the average CPU usage of sliding windows reaches or exceeds the SET threshold, log FCCPUTHD(Option flow control is WRFDal) triggered. 040100 Packet queue usage threshold for log flow control. When the average packet queue usage of sliding windows reaches or exceeds the SET threshold, log FCMSGQTHD(Opti flow control is WRFDonal) triggered. 040100
LOGCTHD
BSC6900
BSC6900
Whether the SCTP is bound to a logical port. For details, ADD see "ADD SCTPLNK(Mandato IPLOGICPOR WRFDry) T". 050402 Logical port No. bound by the SCTP. For details, see the parameter "Logic port No." of the ADD "ADD SCTPLNK(Mandato IPLOGICPOR WRFDry) T". 050402 Logical port slot No. bound by the SCTP. For details, see the parameter "Slot No." of ADD the "ADD SCTPLNK(Mandato IPLOGICPOR WRFDry) T". 050402 CPU usage threshold for recovery from log flow control. When the average CPU usage of sliding windows is lower than the SET threshold, log FCCPUTHD(Option flow control is WRFDal) triggered. 040100
BSC6900
BSC6900
LOGRTHD
BSC6900
LOGRTHD
BSC6900
LOGSW
BSC6900
Packet queue usage threshold for recovery from log flow control. When the average packet queue usage of smooth windows is lower than the SET threshold, log FCMSGQTHD(Opti flow control is onal) triggered. Whether to SET control the log FCSW(Optional) flow
WRFD040100 WRFD040100
LOGTYPE
BSC6900
COL LOG(Mandatory)
None
LONGITUDE
BSC6900
ADD GPS(Mandatory)
MRFD210502
LONGITUDE SEC
BSC6900
ADD GPS(Mandatory)
MRFD210502
LOOPSW
SET E1T1(Optional)
None
LOPT
Loop type
BSC6900
Loopback type No loop: Cancel loop back Remote loop: Remote loop back Line remote loop: Remote loop back Local loop: Local loop back Payload loop: Remote Loop back on all E1/T1 port time slots except TS0 Single channel local loop: Local Loop back on a specified TS Single channel remote loop: SET Remote loop E1T1LOP(Mandator back on a y) specified TS None
LOPT
Loop type.
BSC6900
SET OPTLOP(Mandator Loopback y) type This parameter SET specifies the VCLLOP(Mandatory loopback ) type.
None
LOPT
Loop type
BSC6900
None
Number of suspension periods after the bandwidth adjustment is performed based on the packet drop ratio. This parameter specifies the delay statistics periods in which the bandwidth is not adjusted when the bandwidth adjustment function of the logical port is triggered due to the change of the packet drop ratio. This parameter can be used to control the rate of the ADD bandwidth IPLOGICPORT(Opt adjustment at WRFDional) the logical 050422 Number of the IP logical port that ADD carries the IP WRFDIPPATH(Mandatory) path 050408 Optical interface ADD number of the VPCLCX(Optional) low end port None ADD ATMLOGICPORT( Logical port Optional) number
LPN
BSC6900
LPN
BSC6900
LPN
BSC6900
None
LPN
BSC6900
WRFD050422
LPN
BSC6900
LPNSN
BSC6900
Number of the IP logical port that ADD carries the IP WRFDIPPATH(Mandatory) path 050408 ADD ATMLOGICPORT( Mandatory) ADD IPLOGICPORT(Ma Type of ndatory) logical port
LPNTYPE
BSC6900
None
Location RRC conn LRRCCONNC share CPU control CPUTHD threshold BSC6900
CPU usage threshold for location RRC load sharing. When the CPU usage reaches or exceeds the threshold, location RRC SET connection SHARETHD(Option load sharing MRFDal) is triggered. 210101
Location RRC conn LRRCCONNC share msg control MSGTHD threshold BSC6900
Packet control threshold for location RRC load sharing. When the packet queue usage reaches or exceeds the threshold, location RRC SET connection SHARETHD(Option load sharing MRFDal) is triggered. 210101 CPU usage threshold for recovery from location RRC load sharing. When the CPU usage is lower than the threshold, location RRC SET connection SHARETHD(Option load sharing MRFDal) is stopped. 210101 Packet queue usage threshold for recovery from location RRC load sharing. When the packet queue usage is lower than the threshold, location RRC SET connection SHARETHD(Option load sharing MRFDal) is stopped. 210101 ADD VPCLCX(Mandator y) Slot number
Location RRC conn LRRCCONNR share CPU restore CPUTHD threshold BSC6900
Location RRC conn LRRCCONNR share msg restore MSGTHD threshold BSC6900
LSN
BSC6900
WRFD050408
LSRN
BSC6900
None
LSTCMD
BSC6900
Whether to include the MRFDEXP LOG(Optional) list command 210305 Query results can be displayed CMP vertically or MRFDTBLDATA(Optional) horizontally 210301
LstFormat
BSC6900
LT
Load type
BSC6900
MRFDLOD BRD(Optional) Loading type 210401 SET LOGLIMIT(Mandato Type of the ry) log
LT
Log Type
BSC6900
MRFD210305
LT
Log Type
BSC6900
EXP LOG(Mandatory)
MRFD210305
LUNILNKN
BSC6900
UNI link number correspondin ADD g with the low WRFDVPCLCX(Optional) end port 031101 VCI value of ADD the low end VPCLCX(Optional) port VCL
LVCI
Low VCI
BSC6900
None
LVPI
Low VPI
BSC6900
ADD VPI value of VPCLCX(Mandator the low end y) port VPL/VCL None
BSC6900
Number of SET the M3UA SCTPSRVPORT(O service WRFDptional) listening port 050409
This parameter specifies the DTX cycle at the MAC layer when the MAC layer supports UL E-DCH inactivity. For details, refer SET to the 3GPP UDTXDRXPARA(O TS 25.321 WRFDptional) protocol. 010686
BSC6900
This parameter specifies the period during which the EDCH transmission is not activated. After this period, data can only be transmitted on the E-DCH within the period specified by MacDtxCycle. For details, refer to the SET 3GPP TS UDTXDRXPARA(O 25.321 WRFDptional) protocol. 010686 This parameter specifies the maximum size of PDUs transmitted at the MAC layer when the UE is in the CELL_FACH state in the L2 enhanced WRFDscenario. 010688
SET UFRC(Optional)
SET UFRC(Optional)
This parameter specifies the maximum size of PDUs transmitted at the MAC layer when the UE is in the CELL_DCH state in the L2 enhanced WRFDscenario. 010685
MAIDX
MA Index
BSC6900
Identifies a maintenance group. Maintenance group: maintenance alliance (MA), which is a component of the maintenance domain (MD). Maintenance domain is an Ethernet or a component of an Ethernet in which the connectivity failure management is performed. The maintenance ADD domain is ETHMA(Mandatory) uniformly ADD managed by ETHMEP(Mandator one ISP. One y) MD can be PING divided into MAC(Mandatory) one or more TRC maintenance MAC(Mandatory) group. None
MAINLINK
BSC6900
Preferred type of the link used to carry a link when the bearer link type is SAALSCTP. When the current bearer link fails, it will be automatically carried on the other type of bearer link. For detailed description of this parameter, refer to the 3GPP TS WRFD25.430. 050404
MANAME
MA Name
BSC6900
None
MapSwitch
BSC6900
Service mapping strategy switch. 1) MAP_HSUPA _TTI_2MS_S WITCH: When the switch is on, 2 ms TTI is supported for HSUPA. 2) MAP_INTER _RAT_PS_IN _CHANLE_LI MIT_SWITC H: When the switch is on, the PS services are transmitted on the DCH during the 2Gto-3G handover. When the WRFDswitch is not 01061403 on, the PS WRFDservices can 010630 be WRFDSET transmitted 010632 UCORRMALGOSW on suitable WRFDITCH(Optional) channels 010688 ADD DEVIP(Mandatory) ADD ETHIP(Mandatory) ADD Subnet mask WRFDEMSIP(Mandatory) of the board 050425 Subnet mask correspondin ADD g to the local PPPLNK(Mandatory IP address of ) the PPP link None ADD Subnet mask MPGRP(Mandatory of the MP ) group in BSC. None
MASK
Subnet mask
BSC6900
MASK
Subnet mask
BSC6900
MASK
Subnet mask
BSC6900
MASK
BSC6900
Mask of the source IP network segment of ADD the packet ICMPGUARD(Mand against the atory) ICMP attack
None
MASK
Subnet mask
BSC6900
This parameter specifies the maximum allowed uplink TX power of a UE in the cell. When this parameter is not set to any value, the UE adopts the correspondin g value of the current serving cell, added through the ADD UCELLSELR ESEL command. Generally, this ADD parameter is UEXT3GCELL(Man not set to any datory) value.
WRFD010801 WRFD010802
The maximum allowed uplink transmit power of a UE in the cell, which is related to the network planning. For detailed ADD information, UCELLSELRESEL( refer to 3GPP Optional) TS 25.304.
This parameter indicates whether to ADD configure the UEXT3GCELL(Opti maximum TX WRFDonal) power. 020203 Maximum coverage of the cell antenna. This is controlled by MTRLGY and ADD valid when USMLCCELL(Optio MET~0(metri WRFDnal) c system). 020801 This parameter specifies the maximum coverage of the cell antenna. This is controlled by MTRLGY and valid when ADD IMP~1(British USMLCCELL(Optio measurement WRFDnal) ). 020801
BSC6900
BSC6900
BSC6900
If the number of the association retransmissio ns exceeds this value, the parameter is deleted automatically. The value must be ADD greater than SCTPLNK(Optional Path max WRFD) retrans. 050402 The maximum number of attempts to perform interfreq handovers This parameter specifies the maximum number of attempts for the RNC to perform interfreq handover after interfreq handover failure. The handover attempts should involve the cells that have not been tried but ADD satisfy the UCELLMBDRINTE handover WRFDRFREQ(Optional) conditions. 020302
MaxAttNum
BSC6900
MaxAttNum
BSC6900
This parameter specifies the maximum number of attempts for the RNC to perform interRAT handovers after a celloriented measurementbased DRD inter-RAT handover failure. The handover attempts should involve the cells that have not been tried but ADD satisfy the UCELLMBDRINTE handover WRFDRRAT(Optional) conditions. 020303 This parameter specifies the maximum bit ADD rate of the UTYPRABBASIC(M typical WRFDandatory) service. 010510
MaxBitRate
Max rate[bit/s]
BSC6900
MaxBitRate
BSC6900
This parameter denotes the rate of services. The typical services include 12.2 kbit/s, 64 kbit/s, 144 kbit/s, 384 kbit/s and so on. For detailed information of this ADD parameter, UCELLRLPWR(Ma refer to 3GPP WRFDndatory) TS 25.433. 020101 Maximum bandwidth for dynamic ADD adjustment at IPLOGICPORT(Opt the logical ional) port
MAXBW
BSC6900
MRFD210103 WRFD050421
BSC6900
Maximum numbers of incoming calls in one second when the load is lower than the forwarding threshold. When the CPU usage is lower than the sharing out threshold and overload threshold, and call numbers in each second reach the threshold, new arrival call attempts will be shared out to other UMTS CPUS and none will SET be shared in UCTRLPLNSHARE this UMTS MRFDPARA(Optional) CPUS. 210104
BSC6900
Maximum numbers of incoming calls in one second when the load exceeds the forwarding threshold. When the CPU usage is between the sharing out threshold and overload threshold, and call number in one second reaches the threshold, new arrival call attempts will be shared out to other UMTS CPUS and none will SET be shared in UCTRLPLNSHARE this UMTS MRFDPARA(Optional) CPUS. 210104 Maximum number of allowed retransmissio n upon the timeout of the connection ADD control timer WRFDSAALLNK(Optional) (CCTMR). 050301
MAXCC
MaxCC
BSC6900
This parameter specifies the maximum number of cells in the active set. This parameter can achieve the balance between the signal quality in the SHO area and the performance of the system. The more cells the active set contains, the larger macro diversity gain the user obtains in the SHO area, and the smaller the intraSET frequency UINTRAFREQHO( interference Optional) is. But in this ADD case, the UCELLINTRAFRE user occupies QHO(Optional) resources of
WRFD020202 WRFD020203
MaxCmchPi
BSC6900
ADD UFACH(Optional)
BSC6900
This parameter specifies the maximum value of Ec/NO in the E-FACH Ec/N0 adjustment algorithm. The formula is y = x * 0.5 24.5dB ("y" represents the actual value and "x" SET represents URACHMEASURE the GUI WRFDPARA(Optional) value). 010688
This parameter determines the maximum number of links in the EDCH active set. When the RNC acts as the SRNC, the number of links in the EDCH active set for all the UEs under the RNC cannot exceed the parameter value. If the parameter value is too large, a lot of resources on the RAN side will be occupied as the same data is transferred over multiple EDCH links in SET macro UHOCOMM(Option diversity, thus WRFDal) affecting the 01061204 This parameter specifies the maximum number of HARQ retransmissio ns of the ADD MAC-es flow UTYPRABOLPC(M that carries WRFDandatory) this service. 01061203
BSC6900
BSC6900
The parameter indicates the max user number the ADD EFACH UCELLCAC(Option channel can al) supports. The offset between the FACH transmit power and PCPICH transmit power in a cell. Maximum multiplexing frame length.
WRFD020101
MaxFachPow Max transmit power er of FACH[0.1dB] BSC6900 MAXFRAMEL Maximum Frame EN Length[byte]
WRFD020501 WRFD050408
BSC6900
MaxGpsSats
BSC6900
SET USMLC(Optional)
Maximum number of satellites whose ephemeris can be delivered when the AGPS method WRFDis used. 020803
BSC6900
Maximum number of users supported by the HSDPA channel. The user in this parameter refers to the user with services on the HSDPA channel, regardless of the number of RABs carried on the HSDPA channel. Maximum HSDPA user number cannot exceed the HSDPA capability of the NodeB product, In practice, the value can be set based on the cell type ADD and the UCELLCAC(Option richness of WRFDal) the available 020101
BSC6900
Maximum number of users supported by the HSUPA channel. The user in this parameter refers to the user with services on the HSUPA channel, regardless of the number of RABs carried on the HSUPA channel. Maximum HSUPA user number cannot exceed the HSUPA capability of the NodeB product, In practice, the value can be set based on the cell type ADD and the UCELLCAC(Option richness of WRFDal) the available 020101 Max allowed number of continuous invalid measurement reports. For detailed SET information of ULDM(Optional) this SET parameter, USATLDM(Optional refer to 3GPP WRFD) TS 25.433. 020102
BSC6900
MAXMFLEN
ADD PPPLNK(Optional)
The value of this parameter cannot be less than the maximum PPPMUX subframe length (MUXMAXSF L). This parameter can be associated with the maximum segment length of the MP to control whether to segment the multiplexed MP. To enable the PPPMUX, the number of sub-frames must be more than or equal to 2. The following condition must be met: WRFDwMuxMaxSfL 050420 <= ( wMuxMfl- WRFD8 )/2. 050412
MAXMFLEN
ADD MPGRP(Optional)
BSC6900
Maximum number of SET retries when PWDPOLICY(Optio the user logs MRFDnal) in 210305 This parameter specifies the maximum number of channelizatio n codes supported by uplink DPDCH. The larger the value of this parameter, the more the available channelizatio n codes of uplink WRFDDPDCH. 010510
MAXNRP
Max_NRP
BSC6900
Maximum number of allowed retransmissio ADD ns during the WRFDSAALLNK(Optional) verification. 050301 Maximum SET capacity for ALMCAPACITY(Op storing the tional) alarm log
MAXNUM
BSC6900
MRFD210304
BSC6900
If the number of the path retransmissio ns exceeds this value, the parameter is deleted automatically. The value must be ADD smaller than SCTPLNK(Optional Association WRFD) max retrans. 050402
Maximum TX power of the PCPICH in a cell. This parameter should be set based on the actual system environment such as cell coverage (radius) and geographical environment, and the cell total power. When the ratio of soft handover areas keeps the same, the downlink coverage cannot be promoted by the increase ADD of PCPICH WRFDUPCPICH(Optional) power. 020501
MAXPD
BSC6900
BSC6900
Maximum data count in the poll period. It indicates the count of data packets (SD) allowed to be transmitted between the intervals of two Poll messages. The value ranges from 250 to 500 when interface type is set to NNI. The value ranges from 25 to 50 when ADD interface type SAALLNK(Optional) is set to UNI. SET Expire PWDPOLICY(Optio Prompt nal) Dates.
WRFD050301 MRFD210305
MaxQueueTi meLen
BSC6900
Maximum queue time of users. When a user initiates a call, it joins the queue due to cell resource insufficiency. This parameter defines the maximum length of time required for queuing of a user. If cell resources are still insufficient SET after UQUEUEPREEMP expiration, WRFDT(Optional) access fails. 010505
MAXSFLEN
ADD PPPLNK(Optional)
Maximum PPPMUX subframe length. If the PPP frame length is larger than this value, the PPPMUX multiplexing is performed. The value of this parameter cannot be larger than the maximum multiplexed frame length wMuxMfl. To enable the PPPMUX, the number of sub-frames must be more than or equal to 2. The following condition must be met: wMuxMaxSfL <= ( wMuxMfl8 )/2 None
MAXSFLEN
ADD MPGRP(Optional)
None
BSC6900
The parameter specifies the target value of the uplink load, which is decreased through HSUPA power control on the NodeB side. For details about this ADD parameter, UCELLHSUPA(Opti refer to 3GPP WRFDonal) TS 25.433. 01061203
MAXTIME
BSC6900
Maximum STR positioning POSAVE(Optional) time. Maximum TTL value of the sent TRACERT packet
MRFD210502
MAXTTL
MAX TTL
BSC6900
TRC IPADDR(Optional)
None
MaxTxPower
Sum of the maximum transmit power of all DL channels in a cell. For ADD detailed UCELLSETUP(Opti information of onal) this ADD parameter, UCELLQUICKSET refer to 3GPP WRFDUP(Optional) TS 25.433. 020501
BSC6900
The maximum UL transmit power for background service in a specific cell. It is based on the UL coverage requirement of the background service designed by the network planning.For detailed information of the related IE "Maximum allowed UL TX power", ADD refer to the UCELLCAC(Option 3GPP TS WRFDal) 25.331. 020501 Maximum UL transmit power for conversationa l service in a specific cell. It is based on the UL coverage requirement of the conversationa l service designed by the network planning.For detailed information of the related IE "Maximum allowed UL TX power", ADD refer to the UCELLCAC(Option 3GPP TS al) 25.331.
BSC6900
WRFD020101 WRFD020501
BSC6900
The maximum UL transmit power for the interactive service in a specific cell. It is based on the UL coverage requirement of the interactive service designed by the network planning.For detailed information of the related IE "Maximum allowed UL TX power", ADD refer to the UCELLCAC(Option 3GPP TS WRFDal) 25.331. 020501 Maximum UL transmit power for the streaming service in a specific cell. It is based on the UL coverage requirement of the streaming service designed by the network planning.For detailed information of the related IE "Maximum allowed UL TX power", ADD refer to the UCELLCAC(Option 3GPP TS WRFDal) 25.331. 020501
MaxUserNum Max user number of CodeAdj code adjust BSC6900 MAXVALIDDA Maximum Valid TES Dates
BSC6900
This parameter specifies the number of users selected in code reshuffling. Code reshuffling can be triggered only when the number of users on a code is no greater than the threshold. Code reshuffling has a big impact on the QoS. In addition, the reshuffled subscribers occupy two code resources during code reshuffling. Thus, the ADD parameter UCELLLDR(Option should be set WRFDal) to a 020106 SET PWDPOLICY(Optio Maximum MRFDnal) Valid Dates. 210305
MBDRFlag
BSC6900
Whether the cell supports the measurebased directed retry (MBDR) algorithm. The value TRUE indicates that the cell supports the MBDR algorithm, and the value ADD FALSE UINTERFREQNCE indicates that LL(Optional) the cell does ADD not support U2GNCELL(Option the MBDR WRFDal) algorithm. 020302
MBDRPrio
Priority of a MBDR cell. This parameter is valid only when the "MBDRFlag" parameter is set to TRUE. It indicates the tiptop priority when the value is set to 0, and the lowest priority when the value is set to 15. The higher the priority, the easier it is for the MBDR cell to be delivered as the measurement object and the easier to be selected to ADD the handover UINTERFREQNCE target cell LL(Optional) when there ADD are many of U2GNCELL(Option cells meet the WRFDal) quality 020302 Detection index. The index is a unique value ADD ranging from IPRTBIND(Mandato 0 to 31 if it is ry) not specified. None Local IP address for STR multi-hop IPCHK(Mandatory) BFD
MBFDCHKN
BSC6900
None
MbmsAF
AF of MBMS service
BSC6900
Activity factor of the MBMS service. Signals might be discontinuous ly transmitted because of the activation detection of conversationa l service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation time. The activity factors of the same transport SET channel might UADMCTRL(Option be different in WRFDal) UL and DL. 020101
BSC6900
WCDMA MBMS general common channel ADD service TRMFACTOR(Opti downlink onal) factor
WRFD050406
MbmsChInd
BSC6900
Indicating whether the CCH carries the MCCH of WRFDthe MBMS. 010616
When the priority of the RAB of MBMS services exceeds this threshold, reconfigure the MBMS power to the minimum power. The MBMS service at each rate is set on the basis of two power levels. The power set for an MBMS service is determined according to cell load during the service access. In addition, the FACH power of the MBMS service must ADD be decreased UCELLLDR(Option as required in WRFDal) the duration 020106
BSC6900
A timer used to alarm for SET no mbms UMBMSALARMPA data for WRFDRA(Mandatory) MBMS traffic. 010616 ON denotes enabling of the MBMS Iub transmission resource sharing function; OFF denotes disabling of the MBMS Iub transmission SET resource UMBMSSWITCH(O sharing WRFDptional) function. 010627 ADD mobile UMBMSALARMSE country code WRFDRVICE(Mandatory) of the RNC. 010616 ADD mobile UMBMSALARMSE network code WRFDRVICE(Mandatory) of the RNC. 010616
MbmsMCC
MbmsMNC
BSC6900
BSC6900
It is an indicator of ADD MBMS UINTRAFREQNCE neighboring LL(Optional) cell. MBMS service release is an extreme method in reducing the cell load and recovering the system when the cell is overloaded and congested. The mechanism of the OLC is that an action is performed in each [OLC period] and some services are selected based on the action rules to perform this action. This parameter defines the maximum number of MBMS ADD services UCELLOLC(Option released in al) executing Indicating SET whether UQUEUEPREEMP MBMS is T(Optional) supported.
WRFD010626
WRFD020107
WRFD010505
BSC6900
This parameter specifies the uplink bit rate of the MBMS service in PTP mode. The CN does not assign the uplink rate to the MBMS service, but the MBMS service in PTP mode is in acknowledge d mode and requires the SET uplink rate for URNCMBMSPARA( RLC status WRFDOptional) reporting. 01066001 ADD UCELLMBMSSA(M andatory) ADD UMBMSSA(Mandat ory) ADD USAMBMSPARA(M andatory)
MbmsSaId
MBMS SA ID
BSC6900
MBMS SA ID. For detailed information of this parameter, refer to the WRFD3GPP 25.346. 010616
BSC6900
WRFD010616
MbmsSwitch
BSC6900
ON denotes enabling of the MBMS function; OFF denotes SET disabling of UMBMSSWITCH(M the MBMS WRFDandatory) function. 010616
SET LICENSE(Optional)
BSC6900
The total MBMS traffic of all operators cannot exceed the MBMS value in the license. This parameter specifies the transport mode of MBMS services. The point-tomultipoint (PTM), pointto-point (PTP), and enhanced PTM (ENHANCED PTM) modes are static or semi-static transport modes. They are relatively simple and have little impact on the MBMS service and the network performance. The dynamic mode (DYNAMIC) is complicated. In dynamic mode, transition
MRFD210403
WRFD010660
MBS
BSC6900
WRFD050421
BSC6900
This parameter defines the adjustment coefficient of load value of 2G cell, which used when load value of 2G cell is SET compared to UMBSCCRRM(Opti the load value onal) of 3G cell. This parameter defines the load difference threshold between 3G cell and 2G cell when CS service is distributed to 2G. If the load difference between 3G cell and target 2G cell exceeds this parameter value, then the loadbased balance of SET CS service UMBSCCRRM(Opti may be onal) performed.
WRFD211403 WRFD070004
This parameter defines the load difference threshold between 3G cell and 2G cell when PS service is distributed to 2G. If the load difference between 3G cell and target 2G cell exceeds this parameter value, then the loadbased SET balance of PS UMBSCCRRM(Opti service may onal) be performed. If the switch is ON, the load state of target 2G cell will be considered during Noncovered InterRat handover procedure. If the switch is OFF, the load state of target SET 2G cell will UMBSCCRRM(Opti not be onal) considered.
WRFD211403 WRFD070004
WRFD211404 WRFD070004
BSC6900
If the switch is ON, the NACC procedure does not require the support of the CN. Instead, the GERAN (P) SI is sent through the internal information exchange mechanism SET between the UMBSCCRRM(Opti RNC and onal) BSC. This parameter defines the switch of service distribution and load balancing algorithm. If SERVICEBASED is selected, only load state of 2G target cell will be considered. If LOADBASED is selected, the difference between the load in the source cell and load in the target 2G SET cell will be UMBSCCRRM(Opti considered in onal) addition.
WRFD070004 MRFD211401
MCC
ADD ULASNAMAP(Mand atory) ADD UIMSISNAMAP(Ma ndatory) ADD Mobile UCNOPERATOR(M country code WRFDandatory) of the RNC. 021311
MCC
WRFD020303 WRFD020309 Mobile WRFDADD Country Code 010801 UEXT2GCELL(Man (MCC) of the WRFDdatory) GSM cell. 010802 The code of SET the country to UMBMSPERF(Man which the WRFDdatory) RNC belongs. 010101 This parameter specifies the coefficient of access period WRFDof the MCCH. 010616 This parameter specifies the coefficient of modification period of the MCCH. This parameter specifies the coefficient of repetition period of the MCCH.
MCC
BSC6900
BSC6900
WRFD010616
BSC6900
WRFD010616
MCCLASS
MC PRI number
BSC6900
ADD MPGRP(Optional)
Number of MC priorities. This parameter is valid when the MP group type is MC. None
MCR
BSC6900
MDIDX
MD INDEX
BSC6900
WRFD050305 ADD WRFDETHMD(Mandatory) Identifies a 05030107 ADD maintenance WRFDETHMA(Mandatory) domain 050301
MDName
MD NAME
BSC6900
WRFD050425
BSC6900
Measurement quantity used in coveragebased interRAT measurement in event-3Atriggered reporting mode. - Ec/No: signal-tonoise ratio - RSCP: indicates the received signal code power CPICH_Ec/N o indicates that the Ec/No measurement quantity is used for event 3A measurement . The physical unit is dB; SET CPICH_RSC UINTERRATHOCO P indicates V(Optional) that the ADD RSCP UCELLINTERRATH measurement WRFDOCOV(Optional) quantity is 020303 Identifies a maintenance point in the maintenance alliance A maintenance ADD point is an ETHMEP(Mandator edge node of WRFDy) the MA. 050425
MEPID
MEP ID
BSC6900
MEPTYPE
BSC6900
MHF
BSC6900
The type of the maintenance point added to the maintenance group. LocalMep indicates a local maintenance point and RemoteMep indicates a ADD remote ETHMEP(Mandator maintenance y) point. MP/MC ADD sequence MPGRP(Optional) header option
WRFD050425 WRFD050425
MichId
MICH ID
BSC6900
ADD Physical UCELLMCCH(Man channel ID of WRFDdatory) the MICH. 010616 TX power of the MICH. The greater the power of the MICH, For details about this ADD parameter, UCELLMCCH(Optio refer to the WRFDnal) 3GPP 25.433. 010616 The value indicates whether the MICH uses time and space TX diversity. For detailed information of this parameter, ADD refer to the UCELLMCCH(Optio 3GPP TS WRFDnal) 25.433. 010616
MichPower
MICH Power[dB]
BSC6900
MichSttdInd
BSC6900
MINBW
BSC6900
Minimum bandwidth for dynamic ADD adjustment at IPLOGICPORT(Opt the logical ional) port None Min common channel priority supported by WRFDFACH. 020900 This parameter specifies the minimum spreading factor supported by downlink DPDCH. The larger the value of this parameter, the fewer the available spreading factors of downlink WRFDDPDCH. 010510
MinCmchPi
BSC6900
ADD UFACH(Optional)
BSC6900
BSC6900
This parameter specifies the minimum value of Ec/NO in the E-FACH Ec/N0 adjustment algorithm. The formula is y = x * 0.5 24.5dB ("y" represents the actual value and "x" SET represents URACHMEASURE the GUI WRFDPARA(Optional) value). 010688
MinForAmrE
BSC6900
This parameter is valid when the correspondin g parameter related to the reporting period unit for the event E of AMR service is set to MIN. The DL code TX power is reported periodically after the event E1 is reported. This parameter specifies the reporting period. This parameter is valid when the correspondin g parameter related to the reporting period unit for the event E of BE service is set to MIN. The DL code TX power is reported periodically after the event Ea is reported. This parameter specifies the reporting period.
WRFD020701 WRFD020309
MinForBeE
BSC6900
WRFD021101 WRFD020309
MinForBeF
BSC6900
This parameter is valid when the correspondin g parameter related to the reporting period unit for the event F of BE service is set to MIN. The DL code TX power is reported periodically after the event Fa is reported. This parameter specifies the reporting period.
WRFD021101 WRFD020309
DL basic common measurement report cycle. For detailed SET information of ULDM(Mandatory) this SET parameter, USATLDM(Mandat refer to 3GPP WRFDory) TS 25.433. 020102
BSC6900
Measurement report period of event E triggered by DL OLC. For detailed SET information of ULDM(Mandatory) this SET parameter, USATLDM(Mandat refer to 3GPP WRFDory) TS 25.433. 020102 This parameter specifies the HSDPA bit rate measurement report period. For detailed SET information of ULDM(Mandatory) this SET parameter, USATLDM(Mandat refer to 3GPP WRFDory) TS 25.433. 020102 HSDPA power requirement measurement report period For detailed SET information of ULDM(Mandatory) this SET parameter, USATLDM(Mandat refer to 3GPP WRFDory) TS 25.433. 020102 This parameter specifies the HSUPA bit rate measurement report period. For detailed information of this parameter, refer to 3GPP WRFDTS 25.433. 020102
BSC6900
BSC6900
BSC6900
SET ULDM(Mandatory)
UL basic common measurement report cycle. For detailed SET information of ULDM(Mandatory) this SET parameter, USATLDM(Mandat refer to 3GPP WRFDory) TS 25.433. 020102 Measurement report period of event E triggered by UL OLC. For detailed SET information of ULDM(Mandatory) this SET parameter, USATLDM(Mandat refer to 3GPP WRFDory) TS 25.433. 020102 This parameter is valid when the correspondin g parameter related to the reporting period unit for the event E of VP service is set to MIN. The DL code TX power is reported periodically after the event Ea is reported. This parameter specifies the reporting WRFDperiod. 020304
BSC6900
MinForVpE
BSC6900
BSC6900
ADD IMAGRP(Optional)
Minimum links required for this IMA group in the activated WRFDstate 050408
Minimum TX power of the PCPICH in a cell. This parameter should be set based on the actual system environment such as cell coverage (radius) and geographical environment. Ensure that MinPCPICHP ower is set under the condition of a proper proportion of soft handover area, or under the condition that ADD no coverage UPCPICH(Optional) hole exists.
WRFD020501 WRFD020104
MINRXINT
STR IPCHK(Optional)
MINTXINT
STR IPCHK(Optional)
BSC6900
This parameter specifies the minimum spreading factor supported by uplink DPDCH. The larger the value of this parameter, the fewer the available spreading factors of uplink WRFDDPDCH. 010510
Mirror STR destination ETHMIRRORPORT Ethernet port WRFD(Mandatory) number 050421 STR Mirror ETHMIRRORPORT Ethernet port (Mandatory) number None STR ETHMIRRORPORT (Mandatory) Mirror type Maximum number of random access preamble loops. For detailed information of this parameter, refer to 3GPP TS 25.331.
BSC6900
BSC6900
None
Mmax
ADD URACH(Optional)
WRFD020501 WRFD010401
MNC
BSC6900
ADD ULASNAMAP(Mand atory) ADD UIMSISNAMAP(Ma ndatory) ADD Mobile UCNOPERATOR(M network code WRFDandatory) of the RNC. 021311
MNC
BSC6900
Mobile Network ADD Code (MNC) UEXT2GCELL(Man of the GSM datory) cell.
MNC
BSC6900
The code of the mobile communicatio SET n network to UMBMSPERF(Man which the WRFDdatory) RNC belongs. 010101
BSC6900
MOCN Control Switch. 1) COMM_MOC N_NRI_GLO BAL_CONFI G_MODE_S WITCH: When the switch is selected, the NRI of any CN node in the RNC is unique in the CS or PS domain. 2) COMM_MIB_ MULTI_PLM N_LIST_ALL OWED_SWI TCH: When the switch is selected, the operator information configured in the MOCN cell is sent as SET Multi PLMN UOPERATORSHA List in the RINGMODE(Option system WRFDal) information. 021311
BSC6900
This parameter determines whether the RNC supports the MOCN function. When MOCN SET Supported, UOPERATORSHA RNC can RINGMODE(Option configure WRFDal) multi-plmn. 021311
MODE
BSC6900
Working mode of the system clock. Working modes of the system clock are as follows: (1) MANUAL: In this mode, you must specify a clock source and prevent the switching of the clock source. (2) AUTO: In this mode, you do not need to specify a clock source and the system automatically selects the clock source with the highest priority. (3) FREE: In SET this mode, CLKMODE(Mandat the crystal MRFDory) oscillator of 210502
MODE
MODE
Configure Mode
BSC6900
SCTP link work mode. Server mode: BSC6900 starts the listening and waits for the peer to send the SCTPINIT message. Client mode: BSC6900 actively sends ADD the SCTPSCTPLNK(Mandato INIT WRFDry) message. 050402 SET QUICKCFG(Mandat Configuration MRFDory) mode 210301 SWP MBSCMODE(Mand atory) CHK Working MODEDATA(Mand mode after atory) switchover
MODE
BSC6900
MRFD210301
MODE
Backup mode
BSC6900
MODE
Check mode
BSC6900
STR IPCHK(Optional)
Working mode of a port. When this parameter is set to CHECK_ON_ STANDBY_P ORT, the connectivity check is performed on the standby port. When this parameter is set to CHECK_ON_ INDEPENDE NT_PORT, the connectivity check is performed on the independent port. When this parameter is set to CHECK_ON_ PRIMARY_P ORT, the connectivity check is None
BSC6900
This timer is started when an AAL2 signaling entity sends the service user an indication for modifying the SET bandwidth of AAL2TMR(Optional an AAL2 WRFD) path. 05030104
BSC6900
This timer is started when an AAL2 signaling entity sends the peer node a request for modifying the SET bandwidth of AAL2TMR(Optional an AAL2 WRFD) path. 05030104 This parameter specifies a sampling period of the RLC ADD retransmissio UTYPRABRLC(Opti n ratio WRFDonal) monitoring. 040100
MoniterPrd
BSC6900
SET UDCCC(Optional)
Length of the period within which the times of consecutive failure to increase the rate of a BE service is monitored. Increase of the BE service rate is triggered by 4A measurement reports. If the times exceeds the DCCC Rate Up Fail Time Threshold, the DCCC Rate Up Fail Penalty Timer will be started, and 4A report will not be processed until DCCC Rate Up Fail Penalty Timer WRFDexpires. 021101
MPGRPN
MP Group No.
BSC6900
MPGRPN
MP Group No.
BSC6900
None
MPS
BSC6900
Management proving mode of the SAAL link. When Management proving status is set to MPS_NORM AL, the SAAL sends the verification packet in the initial alignment. When Management proving status is set to MPS_EMER GENCY, the SAAL does not send the verification packet in the initial alignment. When Management proving status is set to MPS_NEUTR AL, the SAAL does not ADD send the WRFDSAALLNK(Optional) verification 050301
MPTYPE
MP type
BSC6900
MP type
MPUSLOT
BSC6900
BSC6900
Number of the subrack SET where the MPUBIND(Mandato MPU ry) subsystem is MRFDADD BRD(Optional) located 210301 This switch specifies whether to add the MSCH logical channel on the SCCPCH. When multiMTCH logical channels are carried on one SCCPCH, an MSCH logical channel should be added on the SCCPCH, which is used to send scheduling control SET information of UMBMSSWITCH(O the data of WRFDptional) MTCH. 010660
BSC6900
BSC6900
This parameter specifies whether to add the MSCH logical channel on the SCCPCH. When one MTCH logical channel is carried on one SCCPCH, an MSCH logical channel should be added on the SCCPCH, which is used to send scheduling control SET information of UMBMSSWITCH(O the data of WRFDptional) MTCH. 010660
MsgContent
Msg Content
BSC6900
When ON,the message is valid.When ADD OFF,the UCELLCBSSAC(M message is WRFDandatory) invalid. 011001
MsgInd
Message Indicator
BSC6900
When ON,the message is valid.When ADD OFF,the UCELLCBSSAC(O message is WRFDptional) invalid. 011001
MSPCMD
BSC6900
Control command of the MSP SET switchover MSPCMD(Mandato protection ry) group
None
MSW
Switch for the self-healing of the OMU when the SET OMU process SLFSLVSW(Option memory is al) overloaded None
MtchMaxPwr
BSC6900
Available guarantee codes of all the MTCHs. This parameter is a protection for the MBMS PTM bearing. When the codes of all the MTCHs are few, preemption of MBMS PTM bearing should be avoided. This is because the MBMS PTM bearing serves multiple users at the same time. The value should not be too high. Otherwise, all the system resources may be ADD consumed by UCELLCAC(Option the MBMS WRFDal) PTM bearing 020101
MtchMaxSf
Maximum code limit of all the MTCHs. This parameter is a limit to the maximum bearing of the MBMS PTM bearing. When the code of all the MTCHs are few, preemption of MBMS PTM bearing should be avoided. This is because the MBMS PTM bearing serves multiple users at the same time. The value should not be too high. Otherwise, all the system resources ADD may be UCELLCAC(Option consumed by WRFDal) the MBMS 020101
BSC6900
This parameter specifies the minimum coverage percentage of the MTCH correspondin g to the RAB priority of 0. When the cell load is high, the RNC configures low power for the MBMS service so as to avoid worsening congestion in the cell and improve the setup success rate of the MBMS service. This low power, however, should cover ADD the minimum UCELLMBMSFACH coverage (Optional) area of the SET MBMS UMBMSFACH(Opti service. The WRFDonal) minimum 01061603
BSC6900
This parameter specifies the minimum coverage percentage of the MTCH correspondin g to the RAB priority of 15. When the cell load is high, the RNC configures low power for the MBMS service so as to avoid worsening congestion in the cell and improve the setup success rate of the MBMS service. This low power, however, should cover ADD the minimum UCELLMBMSFACH coverage (Optional) area of the SET MBMS UMBMSFACH(Opti service. The WRFDonal) minimum 01061603
BSC6900
This parameter specifies the MTCH multiplexing threshold. When the rate of an MBMS service is lower than this threshold, the service, together with other services, is allocated a multiplexed SCCPCH, whose transmission rate is set to the MTCH SET multiplexing URNCMBMSPARA( threshold WRFDOptional) fixedly. 010660 This parameter specifies whether to apply Robust Header Compression (ROHC) on the MTCH. The value TRUE indicates to apply ROHC WRFDon the MTCH. 010660
BSC6900
SET UMTCH(Optional)
MtchRsvPwr
BSC6900
Available guarantee power of all the MTCHs. This parameter is a protection for the MBMS PTM bearing. When the power of all the MTCHs are little, preemption of MBMS PTM bearing should be avoided. This is because the MBMS PTM bearing serves multiple users at the same time. The value should not be too high. Otherwise, all the system resources may be ADD consumed by UCELLCAC(Option the MBMS WRFDal) PTM bearing 020101 Available guarantee codes of all the MTCHs. This parameter is ADD a protection UCELLCAC(Option for the MBMS WRFDal) PTM bearing. 020101 Metric system. The values of this parameter include "MET" MRFDADD GPS(Optional) and "IMP". 210301
MtchRsvSf
MTCH reserve SF
BSC6900
MTRLGY
Metrology
BSC6900
MTRLGY
Metrology
BSC6900
MTU
MTU value
BSC6900
Support localization maintenance, Metric System and British ADD Measurement USMLCCELL(Optio can be WRFDnal) selected. 020801 ADD SCTPLNK(Optional Maximum WRFD) transport unit 050402
MTU
MTU[Byte]
BSC6900
ADD DEVIP(Optional)
MTU
MTU[Byte]
BSC6900
MUXTIME
BSC6900
ADD PPPLNK(Optional)
MUXTIME
BSC6900
ADD MPGRP(Optional)
MUXTYPE
IP MUX Type
BSC6900
STR IPCHK(Optional)
WRFD050420 WRFD050412
N1
N1
BSC6900
N300
Constant 300
BSC6900
Number of transmitted verification packets in the initial verification. ADD See the ITUSAALLNK(Optional) T Q2110. Maximum number of retransmissio ns of the RRC SET CONNECTIO UIDLEMODETIME N REQUEST R(Optional) message.
WRFD050301
WRFD010101
N302
Constant 302
BSC6900
Maximum number of retransmissio ns of CELL UPDATE/UR A SET UPDATE.Prot UCONNMODETIM ocol default WRFDER(Optional) value is 3. 010101 Maximum number of retransmissio ns of UE CAPABILITY INFORMATI SET ON. Protocol UCONNMODETIM default value WRFDER(Optional) is 2. 010101 Maximum number of retransmissio n of RRC SET CONNECTIO UCONNMODETIM N RELEASE WRFDER(Optional) COMPLETE. 010101
N304
Constant 304
BSC6900
N308
Constant 308
BSC6900
N312
Constant 312
BSC6900
Maximum number of successive "in sync" indications received from WRFDL1. 010101
N313
Constant 313
BSC6900
N315
Constant 315
BSC6900
Maximum number of successive "out of sync" indications received from SET L1. Protocol UCONNMODETIM default value ER(Optional) is 20. Maximum number of successive "in sync" indications received from L1 when T313 is activated. SET Protocol UCONNMODETIM default value ER(Optional) is 1.
WRFD010101
WRFD010101
N381
Constant 381
BSC6900
Maximum number of resend times of message "RRC CONNECTIO N SETUP" or "CELL UPDATE SET CONFIRM". UCONNMODETIM default value WRFDER(Optional) is 1. 010101
NAME
OSP name
BSC6900
ADD OPC(Mandatory)
WRFD050301
NAME
DSP name
BSC6900
WRFD050301
NAME
BSC6900
WRFD050301
NAME
BSC6900
ADD Name of the MTP3LKS(Mandato signalling link WRFDry) set 050301 ADD MTP3LNK(Mandato ry) ADD ADJNODE(Mandat ory)
NAME
NAME
BSC6900
Name of the MTP3 link Name of the adjacent node Local entity name. The local entity name must be unique. Name of the destination entity
WRFD050301
None
NAME
BSC6900
WRFD050409 WRFD050409
NAME
BSC6900
NAME
BSC6900
ADD M3RT(Mandatory)
The M3UA route names and the M3UA routes are in the oneto-one matching WRFDrelation. 050409
NAME
BSC6900
Name of the M3UA link set. The name of the M3UA signalling link ADD set must be WRFDM3LKS(Mandatory) unique. 050409 M3UA signaling link name. The M3UA link names and the M3UA links are in the one-toADD one matching WRFDM3LNK(Mandatory) relation. 050409
NAME
NB01max
BSC6900
ADD URACH(Optional)
Upper limit of random access backoff delay. For details, refer to the 3GPP TS 25.331 and 3GPP TS 25.214 protocols. Lower limit of random access backoff delay. For details, refer to the 3GPP TS 25.331 and 3GPP TS 25.214 protocols.
WRFD020501 WRFD010401
NB01min
BSC6900
ADD URACH(Optional)
WRFD020501 WRFD010401
When call shock control starts, the AMR_RRC number can SET be accessed UCALLSHOCKCTR per second WRFDL(Optional) for NodeB. 040100
BSC6900
Number of SET the NBAP SCTPSRVPORT(O service WRFDptional) listening port 050402
BSC6900
When the operation and maintenance channel of NodeB is operating in the ATM, this parameter indicates the address of the operation ADD and UNODEBIP(Mandat maintenance ory) console.
WRFD050420 WRFD050412
NBATMOAM MASK
BSC6900
When the operation and maintenance channel of NodeB is operating in the ATM, this parameter indicates the mask of the ADD operation and UNODEBIP(Mandat maintenance WRFDory) console. 050421 When call shock control starts, the register and 3G->2G reselect number can SET be accessed UCALLSHOCKCTR per second WRFDL(Optional) for NodeB. 040100
NBIPOAMIP
BSC6900
When the operation and maintenance channel of NodeB is operating in the IP transmission mode, this parameter indicates the address of the operation ADD and UNODEBIP(Mandat maintenance WRFDory) console. 031101
BSC6900
When the operation and maintenance channel of NodeB is operating in the IP transmission mode, this parameter indicates the mask of the ADD operation and UNODEBIP(Mandat maintenance WRFDory) console. 031101
NBLB1
BSC6900
The first ADD electrical UNODEBESN(Man serial number WRFDdatory) of NodeB 031101
NBLB2
BSC6900
The second ADD electrical UNODEBESN(Man serial number datory) of NodeB The above values of the algorithms represent the following information: CRD_ADCTR L: Control NodeB Credit admission control algorithm Only when NODEB_CRE DIT_CAC_S WITCH which is set by the SET UCACALGO SWITCH command and this switch are on,the NodeB Credit admission control algorithm is valid. HSDPA_UU_ ADCTRL: Control ADD HSDPA UU UCELLALGOSWIT Load CH(Optional) admission
WRFD031101
WRFD020101 WRFD020102
BSC6900
The algorithms with the above values represent are as follow: ALGORITHM _OFF: Disable downlink call admission control algorithm. ALGORITHM _FIRST: The load factor prediction algorithm will be used in downlink CAC. ALGORITHM _SECOND: The equivalent user number algorithm will be used in downlink CAC. ALGORITHM _THIRD: The ADD loose call UCELLALGOSWIT admission WRFDCH(Mandatory) control 020101
The algorithms with the above values represent are as follow: INTRA_FRE QUENCY_LD B: Intrafrequency load balance algorithm. It is also named cell breathing algorithm.Bas ed on the cell load, this algorithm changes the pilot power of the cell to control the load between intrafrequency cells. PUC: Potential user control algorithm. Based on the cell load, this ADD algorithm UCELLALGOSWIT changes the CH(Optional) selection/rese
BSC6900
The algorithms with the above values represent are as follow: NBM_LDC_A LL_UE: When BHO select user occurs, no need to consider whether target cell support Ue. NBM_LDC_M ATCH_UE_O NLY: When BHO select user occurs, only consider Ues supported by target cell. NBM_LDC_M ATCH_UE_FI RST: When BHO select user occurs, first consider ADD Ues UCELLALGOSWIT supported by WRFDCH(Optional) target cell. 020106
BSC6900
The algorithms with the above values represent are as follow: ALGORITHM _REQUIRED: Always reset the mac-hs no matter the cells in question are in the same NodeB or not. ALGORITHM _DEPEND_O N_LCG: Reset the mac-hs only when the cells in question are ADD in the UCELLALGOSWIT different local WRFDCH(Optional) cell group. 01061006
BSC6900
The algorithms with the above values represent are as follow: ALGORITHM _OFF: Disable uplink call admission control algorithm. ALGORITHM _FIRST: The load factor prediction algorithm will be used in uplink CAC. ALGORITHM _SECOND: The equivalent user number algorithm will be used in uplink CAC. ALGORITHM _THIRD: The loose call admission ADD control UCELLALGOSWIT algorithm will WRFDCH(Mandatory) be used in 020101 This parameter is used to identify WPS users with priority. For instance, if priorities 3, 4, 5, and 6 are selected, users with SET priorities are UWPSALGO(Optio regarded as WRFDnal) WPS users. 021104
BSC6900
WPS (Wireless Priority Service) is NS/EP (National Security/Emer gency Preparedness ) AMR conversation service controlled by White House of USA. NCS is authorized to manage the execution of the WPS project. This switch indicates SET whether the UWPSALGO(Optio WPS function WRFDnal) is supported. 021104 ADD UNBSC(Mandatory) ADD UIURGCONN(Man Neighboring datory) BSC Index.
NBscIndex
BSC6900
WRFD070004
NBscIndex
BSC6900
The Index of neighboring ADD BSC that the UEXT2GCELL(Man gsm cell WRFDdatory) belongs to. 020303 When the RRC REQ total number of one NodeB reach this threshold the SET RRC flow UCALLSHOCKCTR control will be WRFDL(Optional) triggered. 040100
BSC6900
NBTRANTP
NodeB TransType
BSC6900
ADD Transmission UNODEBIP(Mandat type of WRFDory) NodeB 031101 Uniquely identifying the different ADD network in the UEXT2GCELL(Man neighboring WRFDdatory) area. 020303 ADD UINTRAFREQNCE LL(Mandatory) ADD UINTERFREQNCE LL(Mandatory)
NCC
NCellId
WRFD020202 WRFD020203
Cell Dynamic ShutDown Neighbour Cell NCellLdrRem Load Remain ainThd threshold
BSC6900
The cell is shut down automatically only when the neighboring cell load is less than the difference between the ADD LDR UCELLDYNSHUTD threshold and WRFDOWN(Optional) this threshold. 020117 ADD UINTRAFREQNCE LL(Mandatory) ADD UINTERFREQNCE LL(Mandatory) ADD UEXT2GCELL(Opti onal) ID of the RNC controlling a neighboring cell. Uniquely identifying an RNC. Indicating the network control mode.
NCellRncId
BSC6900
NcMode
BSC6900
When the number of UEs responding to counting/reco unting is greater than or equal to this threshold, the PTM mode is applied to data transmission. ADD Otherwise, UCELLMBMSPARA the PTP (Optional) mode is used. ADD Note that the USAMBMSPARA(O number of ptional) UEs includes SET the number of URNCMBMSPARA( connected WRFDOptional) mode UEs. 01066001
NCOV Reloc Ind NcovHoOn2Gl based on GSM cell dInd load BSC6900
When this parameter is set to ON, and when the load of the GSM cell exceeds the related threshold, the RNC will stop the noncoverage based interRAT handover; when this parameter is set to OFF, the RNC will do reversely. This parameter determines whether to stop the noncoverage based handover from the UMTS network to the GSM SET network UINTERRATHONC according to OV(Optional) the load
WRFD020305 WRFD020306
Ncrnonhcs
Non-HCS NCR
BSC6900
Maximum number of non-HCS cell reselection. This parameter, along with Tcrmaxnonhc s, defines the speed estimation threshold of non-HCS cells. For detailed ADD information, UCELLSELRESEL( refer to 3GPP WRFDOptional) TS 25.304. 010801 The DSP and OSP are in the associated mode or non associated WRFDmode. 050301
NEIGHBOR
BSC6900
NEXTHOP
BSC6900
ADD N7DPC(Optional) ADD OMUIPRT(Mandato IP address of ry) the next hop None
NEXTHOP
BSC6900
ADD IPRT(Mandatory)
Next hop
WRFD031101
NEXTHOP
BSC6900
WRFD031101
Threshold for deciding that the UE is in high-mobility state. This parameter specifies a threshold for high-speed decision. After the UE reports event 1D, the UE is considered in high-mobility state if the number of changes of the best cell during [TFASTSPDE ST] is larger than [NFASTSPD EST]. The smaller the value is, the SET more possibly UHCSHO(Optional) the UE is ADD decided in UCELLHCSHO(Opt high-mobility WRFDional) state. 021200
NI
Network ID
BSC6900
ADD OPC(Mandatory)
Network ID
WRFD050301
NInsyncInd
This parameter defines the of successive in-sync indications required for the NodeB to trigger the radio link recovery process.The radio link set remains in the initial state until it has received a certain number (the number is defined by NInsyncInd) of successive in-sync indications from L1, and then the NodeB triggers the radio link recovery process, ADD which UCELLSETUP(Opti indicates that WRFDonal) the radio link 022000
NMO
BSC6900
This parameter should be set according to the actual network situation . If there is the Gs interface between SGSN and MSC/VLR, this parameter is set to "MODE1"; otherwise, the parameter is set to "MODE2". It is valid only when [CN ADD domain ID] is UCNDOMAIN(Optio set as WRFDnal) PS_DOMAIN. 010101
NNSfTmr
Timer NNSF
BSC6900
NO1M48ALM Lower limit of No.1 THDDOWN input -48V[-V] NO1M48ALM Upper limit of No.1 THDUP input -48V[-V] NO2M48ALM Lower limit of No.2 THDDOWN input -48V[-V] NO2M48ALM Upper limit of No.2 THDUP input -48V[-V] NO3M48ALM Lower limit of No.3 THDDOWN input -48V[-V]
BSC6900
BSC6900
BSC6900
BSC6900
BSC6900
SET UOPERATORCFG PARA(Optional) SET PWRPARA(Optiona l) SET PWRPARA(Optiona l) SET PWRPARA(Optiona l) SET PWRPARA(Optiona l) SET PWRPARA(Optiona l)
This parameter specifies the value of the NAS Node Selection Function (NNSF) timer for CS traffic paging. For the IMSI paging of the UE in CS connection mode, on receiving the IMSI paging with the first Global CN ID, the RNC stores the Global CN ID and starts the NNSF protection timer. Once the UE responds to the IMSI paging, the RNC stops the NNSF protection timer. Lower limit of input voltage 1 Upper limit of input voltage 1 Lower limit of input voltage 2 Upper limit of input voltage 2 Lower limit of input voltage 3
NO3M48ALM Upper limit of No.3 THDUP input -48V[-V] NO4M48ALM Lower limit of No.4 THDDOWN input -48V[-V] NO4M48ALM Upper limit of No.4 THDUP input -48V[-V] NO5M48ALM Lower limit of No.5 THDDOWN input -48V[-V] NO5M48ALM Upper limit of No.5 THDUP input -48V[-V] NO6M48ALM Lower limit of No.6 THDDOWN input -48V[-V] NO6M48ALM Upper limit of No.6 THDUP input -48V[-V]
BSC6900
BSC6900
BSC6900
BSC6900
BSC6900
BSC6900
BSC6900
SET PWRPARA(Optiona l) SET PWRPARA(Optiona l) SET PWRPARA(Optiona l) SET PWRPARA(Optiona l) SET PWRPARA(Optiona l) SET PWRPARA(Optiona l) SET PWRPARA(Optiona l)
Upper limit of input voltage 3 Lower limit of input voltage 4 Upper limit of input voltage 4 Lower limit of input voltage 5 Upper limit of input voltage 5 Lower limit of input voltage 6 Upper limit of input voltage 6
BSC6900
Maximum number of HSDPA users of the NodeB. If the HSDPA user access is rejected by the NodeB, you can infer that the HSDPA licenses are insufficient. ADD New HSDPA UNODEBALGOPA licenses are WRFDRA(Optional) required. 01061003
Maximum number of HSUPA users of the NodeB. If the HSUPA user access is rejected by the NodeB, you can infer that the HSUPA licenses are insufficient. ADD New HSUPA UNODEBALGOPA licenses are WRFDRA(Optional) required. 01061202 ID of the adjacent node to be added. The parameter is valid when ADD Adjacent ADJNODE(Mandat node type is ory) set to IUB. ADD UNODEBESN(Man datory) ADD UNODEBIP(Mandat ory) NodeB ID STR UNODEBDETECT( Mandatory) NodeB ID ADD UNODEB(Mandator y) FOC UDEHOSTNODEB( Mandatory) FOC UHOSTNODEB(Ma ndatory) NodeB ID. STR UNODEBBWRPT( Mandatory) IMA group number of NodeB
NODEBID
NodeB ID
BSC6900
WRFD05030104
NODEBID
NodeB ID
BSC6900
None
NodeBId
NodeBId
BSC6900
None
NodeBId
NodeB ID
BSC6900
WRFD010101
BSC6900
WRFD031101
BSC6900
IUB_LDR (Iub congestion control algorithm): When the NodeB Iub load is heavy, users are assembled in priority order among all the NodeBs and some users are selected for LDR action (such as BE service rate reduction) in order to reduce the NodeB Iub load. NODEB_CRE DIT_LDR (NodeB level credit congestion control algorithm): When the NodeB level ADD credit load is UNODEBALGOPA heavy, users RA(Optional) are
WRFD020106 WRFD020107
NodeBName
NodeB name
BSC6900
ADD UIPDL(Mandatory) ADD UNODEBALGOPA RA(Mandatory) ADD UNODEBLDR(Man datory) ADD UNODEBOLC(Man datory) ADD UCCP(Mandatory) ADD UCELLSETUP(Man datory) ADD ULOCELL(Mandato ry) ADD UNBNODESYNCM ONPARA(Mandator y) ADD UNCP(Mandatory) ADD UNODEB(Mandator y) ADD UCELLQUICKSET UP(Mandatory) ADT URES(Mandatory) BLK Name of the UNODEB(Mandator NodeB. STR UNODEBBWRPT( Mandatory)
None
BSC6900
BSC6900
Protocol ADD version of the WRFDUNODEB(Optional) NodeB. 010101 ADD NodeB UNODEBESN(Man transmission WRFDdatory) port type 031101 The period for reporting the NodeB bandwidth information. None The mode for reporting the NodeB bandwidth information, including PERIOD and WRFDEVENT. 031101
NODEBPT
BSC6900
BSC6900
BSC6900
NODEBSN
BSC6900
None
NODEBSRN
Subrack number of the BSC6900 board interworking NodeB None Type of the BSC6900 board interworking NodeB
BSC6900
None
NodeBType
NodeB Type
BSC6900
Indicating the ADD type of the WRFDUNODEB(Optional) NodeB. 050105 ADD UNBNODESYNCM ONPARA(Mandator y) Period of node synchronizati WRFDon. 010101
BSC6900
NODET
BSC6900
NodeType
BSC6900
WRFD010510
NonhcsInd
Non-HCS indicator
BSC6900
Indicating whether the non-HCS speed estimation ADD parameter UCELLSELRESEL( should be Optional) configured.
WRFD010801
NonServToTo Target Non-serving talEdchPwrRa E-DCH to Total Etio DCH Power ratio[%] BSC6900
This parameter specifies the ratio of the non-serving EDCH RX power to the total E-DCH RX power. The parameter indicates whether a non-serving NodeB sends the relative grant (RG) message to the UE. For details about this ADD parameter, UCELLHSUPA(Opti refer to 3GPP WRFDonal) TS 25.433. 01061203
NOutsyncInd
This parameter defines the of successive in-sync indications required for starting the radio link failure timer. When the radio link set is in the synchronized state, the NodeB starts the timer after it receives successive out-of-sync indications of the number defined by NOutsyncInd. The NodeB shall stop and reset the timer after receiving successive insync indications of ADD the number UCELLSETUP(Opti defined by WRFDonal) NInsyncInd.W 022000
NPrio
BSC6900
Priority of neighboring cells. The priority that corresponds to the neighboring cell is valid only when the this parameter is set to TRUE. The lower the priority, the easier it is for the neighboring cell to be delivered as the measurement object. For example, it is more possible for a neighboring cell of priority 1 than a cell of priority 2 to be delivered ADD as the UINTRAFREQNCE measurement LL(Mandatory) object.
WRFD020202 WRFD020203
NPrio
BSC6900
Priority of neighboring cells. The priority that corresponds to the neighboring cell is valid only when the this parameter is set to TRUE. The lower the priority, the easier it is for the neighboring cell to be delivered as the measurement object. For example, it is more possible for a neighboring cell of priority 1 than a cell of priority 2 to be delivered ADD as the UINTERFREQNCE measurement WRFDLL(Mandatory) object. 020302
NPrio
BSC6900
Priority of neighboring cells. The priority that corresponds to the neighboring cell is valid only when the this parameter is set to TRUE. The lower the priority, the easier it is for the neighboring cell to be delivered as the measurement object. For example, it is more possible for a neighboring cell of priority 1 than a cell of priority 2 to be delivered ADD as the U2GNCELL(Mandat measurement WRFDory) object. 020303
NPrioFlag
BSC6900
Priority identifier of neighboring cells. TRUE indicates that the neighboring cell priority is valid in the algorithm of neighboring cell combination. FALSE indicates that the neighboring cell priority is invalid, and, in the algorithm of neighboring cell ADD combination, UINTRAFREQNCE the cell with LL(Optional) invalid priority ADD is the last one UINTERFREQNCE to be LL(Optional) considered as ADD the U2GNCELL(Option measurement al) object.
NPtpToPtmOf fset Ptp To Ptm Offset Number of TRACERT Packages Per TTL
BSC6900
This parameter specifies the NPTP-PTM offset. During recounting in PTP mode, if the number of PTP users is larger than or equal to NPTP-PTM, the transmission mode transits to PTM. The value of NPTP-PTM = "NcountingTh d" + "NPtpToPtm Offset". The transition between PTP and PTM affects user ADD experience. UCELLMBMSPARA Thus, to (Optional) minimize pingADD pong effect, USAMBMSPARA(O the transition ptional) between PTP SET and PTM URNCMBMSPARA( uses a WRFDOptional) threshold 01066001 Number of TRACERT packets sent to each TTL None
NQUERIES
BSC6900
TRC IPADDR(Optional)
NRI
BSC6900
Identifying a Network resourse: 1. The NRI numbers of CS domain and PS domain are independent from each other. 2. If multiple pool areas overlap, the NRI uniquely identify all the CN nodes connected to it. 3. A CN node can have multiple NRIs. In one pool area, however, an ADD NRI can only UNRIGLBCNIDMA correspond to P(Mandatory) one CN node.
WRFD021302 WRFD021311
NRncId
Neighboring RNC ID
BSC6900
NrncId
Nrnc ID
BSC6900
ADD URNCPOOLMEMB ER(Mandatory) Nrnc ID. ADD Identifying a UEXT3GCELL(Man Neighboring datory) RNC.
NRncId
Neighboring RNC ID
BSC6900
None
NSAP
BSC6900
ATM address of the destination node of the AAL2 route. The value is entered in the hexadecimal format, with the length ranging from 2 bytes to 21 bytes (including the 1-byte H' prefix). It is recommende d that the initial byte of the ATM address uses H'45 (indicating E.164 address) or H'39 (indicating the DCC address) or H'47 (indicating the ICD address). ADD The ATM AAL2RT(Mandatory address WRFD) starting with 050301
NSAP
BSC6900
Source ATM address. It should be input in hexadecimal format with prefix of "H'". 1.The first byte of it is recommende d to started with H'45 (indicating E.164 address), H'39 (indicating DCC address) or H'47 (indicating ICD address). When it is started with "H'45", the following seven and a half octets must be BCD code, called E.164e when the last part ADD DSP is full of URNCBASIC(Mand zero, such as WRFDatory) 0x450009715 010101
Nsap
ATM address
BSC6900
The parameter specifies the ATM address correspondin g to the NodeB. It must be input in hexadecimal format with 42 bytes including the prefix H'. It is recommende d that the first byte is H'45 (indicating an E.164 address), H'39 (indicating a DCC address), or H'47 (indicating an ICD address). If the first byte is H'45, then the following seven and a half bytes ADD (that is, 15 UNODEB(Mandator digits) must WRFDy) be a BCD 010101
Threshold for deciding whether the UE in lowmobility state. After the slow speed timer times out, the UE is considered in low-mobility state if the number of changes of the best cell caused by the UE reporting of event 1D during [TSLOWSPD EST] is smaller than [NSLOWSPD EST]. The larger the value is, the SET more possibly UHCSHO(Optional) the UE is ADD decided in UCELLHCSHO(Opt low-mobility WRFDional) state. 021200
NullNRI
NullNRI VALUE
BSC6900
NullNRI VALUE indicates that the ue assigns load to other CN nodes ,when SET NNSF selects UOPERATORCFG other CN PARA(Optional) nodes.
WRFD021306 WRFD021311
Specifies the number of access classes that are restricted at a time according to ADD the flexible UCELLDSACMANU polling ALPARA(Mandatory restriction WRFD) mode. 020114
BSC6900
Specifies the number of access classes that are restricted at a time according to the flexible polling restriction WRFDmode. 020114
BSC6900
Ratio of the minimum guarantee bandwidth of the OAM SET stream to the ETHPORT(Optional port ) bandwidth
BSC6900
ADD PPPLNK(Optional)
BSC6900
ADD MPGRP(Optional)
BSC6900
Minimum guarantee ADD bandwidth of IPLOGICPORT(Opt the OAM WRFDional) stream 050408 Ratio of the minimum guarantee bandwidth of the OAM stream to the ADD port MRFDETHTRK(Optional) bandwidth 210103
BSC6900
DSCP value of the OAM stream. The data of the OAM stream are not added to queues 0 to 5 for transmission. Instead, the data of the OAM stream SET is added to QUEUEMAP(Mand the dedicated atory) queue. None
BSC6900
Minimum guarantee SET bandwidth QUEUEMAP(Optio switch of the nal) OAM stream
MRFD210103
OBJTP
Object Type
BSC6900
Shield type of the alarm. "ALL" indicates one ADD shield type OBJALMSHLD(Man instead of all MRFDdatory) types. 210304
BSC6900
Offset of Qoffset1 when neighboring cell load is heavier than that of the center cell (Note: Qoffset1 is used as a priority to decide which cell will be selected in cell selection or reselection) For detailed information of this ADD parameter, UCELLPUC(Option refer to 3GPP WRFDal) TS 25.304. 020105 Offset of Qoffset1 when neighboring cell load is lighter than that of the center cell (Note: Qoffset1 is used as a priority to decide which cell will be selected in cell selection or reselection) For detailed information of this ADD parameter, UCELLPUC(Option refer to 3GPP WRFDal) TS 25.304. 020105
BSC6900
BSC6900
Offset of Qoffset2 when neighboring cell load is heavier than that of the center cell (Note: Qoffset2 is used as a priority to decide which cell will be selected in cell selection or reselection) For detailed information of this ADD parameter, UCELLPUC(Option refer to 3GPP WRFDal) TS 25.304. 020105 Offset of Qoffset2 when neighboring cell load is lighter than that of the center cell (Note: Qoffset2 is used as a priority to decide which cell will be selected in cell selection or reselection) For detailed information of this ADD parameter, UCELLPUC(Option refer to 3GPP WRFDal) TS 25.304. 020105
BSC6900
Offset of Sintersearch when center cell load level is "Heavy" (Note: Sintersearch is used to decide whether to start the interfrequency cell reselection). For detailed information of this ADD parameter, UCELLPUC(Option refer to 3GPP WRFDal) TS 25.304. 020105 Offset of Sintersearch when center cell load level is "Light" (Note: Sintersearch is used to decide whether to start the interfrequency cell reselection). For detailed information of this ADD parameter, UCELLPUC(Option refer to 3GPP WRFDal) TS 25.304. 020105
BSC6900
Identifying the period of the OLC execution. When overload occurs, execution of OLC can dynamically reduce the cell load. When setting the parameter, consider the hysteresis for which the load monitoring responds to the load change. For example, when the layer 3 filter coefficient is 6, the hysteresis for SET which the ULDCPERIOD(Opti load onal) measurement SET responds to USATLDCPERIOD( the stepWRFDOptional) function 020107 External virtual IP address of the OMU
OMUIP
BSC6900
ADD EMSIP(Optional)
None
OMUMASK
BSC6900
ADD EMSIP(Optional)
OP
Operator
BSC6900
MRFD210305
BSC6900
Operator types. The operator types are as follows: Primary operator: Each RAN system has only one primary operator. The primary operator owns all or part of the resources of the RAN system. The license of the primary operator controls the features and functions supported by the RAN system. Secondary operator: Each RAN system can ADD have a UCNOPERATOR(M maximum of andatory) three
OPMODE
Operate mode
BSC6900
In the normal mode, if the board cannot be reset, no operation is performed. In the force mode, if the board cannot be reset, the UPD operation is JTGCPLD(Mandato performed by MRFDry) force. 210401
BSC6900
This parameter specifies the peer transport channel type for the typical traffic. When this typical traffic is applied on UL, it refers to the DL transport channel type. When this typical traffic is applied on DL, it refers ADD to the UL UTYPRABRLC(Ma transport ndatory) channel type. None This parameter specifies whether the IE is reported to the CN. WRFD020801 WRFD020802 WRFD020803
BSC6900
SET USMLC(Optional)
OPTM
BSC6900
None
BSC6900
Azimuth of the semimajor axis of an uncertain area in the cell center (the clockwise angle from ADD the north to USMLCCELL(Mand the semiWRFDatory) major axis). 020801
OT
Operation type
BSC6900
MRFD210401
BSC6900
WRFD020802
BSC6900
SET USMLC(Optional)
UE positioning mode when the OTDOA method is selected. The UE supports both UEbased OTDOA mode and UEassisted OTDOA WRFDmode. 020802
BSC6900
Mobility flag of the overlay network. This flag is valid when the OVERLAY switch is set to ON. When the flag is set to NOT_FORBI DDEN, this means that, when using the H service, the UE can deliver the intrafrequency measurement and handover to the DRNC cell, which can be used as the target cell of interfrequency handover. When the flag is set to FORBIDDEN, ADD this means UEXT3GCELL(Opti that, when WRFDonal) using the H 020203 The ownership of ADD the AAL2 AAL2PATH(Optiona path is local WRFDl) or peer 05030104 Whether to indicate that the " destination ATM node " is the same as the ATM node specified by the " adjacent WRFDnode ID ". 050301
BSC6900
ADD AAL2RT(Optional)
PAGECTHD
BSC6900
CPU usage threshold for paging flow control. When the average CPU usage of sliding windows reaches or exceeds the threshold, SET paging flow FCMSGQTHD(Opti control is WRFDonal) triggered. 040100 Packet queue usage threshold for recovery from paging flow control. When the average packet queue usage of sliding windows is lower than the threshold, SET paging flow FCMSGQTHD(Opti control is onal) stopped. Whether to SET control paging FCSW(Optional) flow
PAGERTHD
BSC6900
WRFD040100 WRFD040100
PAGESW
PATHCHK
BSC6900
ADD IPPATH(Optional)
PATHID
AAL2 path ID
BSC6900
ID of one AAL2 path between two AAL2 nodes. The PATHID of the same AAL2 path configured between two BLK AAL2 nodes AAL2PATH(Mandat must be the ory) same. The ADD value should AAL2PATH(Mandat not be equal ory) to 0. Uniquely ADD identifies an IPPATH(Mandatory) IP path
WRFD050404 WRFD05030104
PATHID
IP path ID
BSC6900
WRFD050402
PATHID
AAL2 path ID
BSC6900
AAL2 PATH ID
None
PATHID PATHID
BSC6900 BSC6900
PATHT
IP path type
BSC6900
ADD IPPATH(Optional)
PATTYPE
Patch type
BSC6900
Patch type
MRFD210401
PCHPower
PCH power[0.1dB]
BSC6900
BSC6900
Offset of the PCH transmit power from the PCPICH transmit power in a cell. For detailed information of this parameter, ADD refer to 3GPP UPCH(Optional) TS 25.433. TX power of the PCPICH in a cell. This parameter should be set based on the actual system environment such as cell coverage (radius) and geographical environment. For the cells to be covered, the downlink coverage should be guaranteed as a premise. For the cells requiring soft handover area, this parameter should satisfy the proportion of soft handover ADD areas UPCPICH(Optional) stipulated in ADD the network UCELLQUICKSET planning. For UP(Optional) detailed
WRFD020501
WRFD020501
BSC6900
Pilot power adjustment step increased or decreased in each increase of the cell breathing algorithm or decrease of cell pilot. For detailed information of this ADD parameter, UCELLLDB(Option refer to 3GPP WRFDal) TS 25.433. 020104 Peak rate of ADD the ATM ATMTRF(Optional) traffic
PCR
BSC6900
None
PcSwitch
BSC6900
BSC6900
Power control switch. 1) PC_AMR_M ODE_INDUC E_BLER_ALT ER_SWITCH: When the switch is on, the target BLER value of the AMR speech service is the target BLER value of each mode in the AMRC parameter table. When the switch is not on, the target BLER value of the AMR speech service is the target BLER value specified in TYPRAB. 2) PC_DL_INNE SET R_LOOP_PC UCORRMALGOSW _ACTIVE_S ITCH(Optional) WITCH: Pending timer ADD of the M3UA M3LKS(Optional) link set
PeerCellId
Peer Cell ID
BSC6900
ID of the peer cell to which the current cell ADD corresponds UCELLSETUP(Man in a RNC datory) POOL in the ADD case of RNC UCELLQUICKSET Node WRFDUP(Mandatory) Redundancy 040202
PEERIP
Peer IP address
BSC6900
Peer IP address of the PPP link. The IP address of the PPP link ADD on the peer PPPLNK(Mandatory side of the ) BSC.
PEERIP
Peer IP address
BSC6900
WRFD050402 WRFDADD Peer IP 050409 MPGRP(Mandatory address of WRFD) the MP group. 050410 Detects the STR IP address of WRFDIPCHK(Mandatory) the gateway 050421 STR IPLOPTST(Mandat Peer IP ory) address
PEERIP
Peer IP address
BSC6900
PEERIP
Peer IP address
BSC6900
None
PEERIP1
BSC6900
WRFD050402 WRFD050404
PEERIP2
WRFD050402 WRFD050404
BSC6900
BSC6900
The peer IP address should not be the same as ADD the local IPPATH(Mandatory) address. Peer IP LOP address of VCL(Mandatory) IPoA PVC
None
BSC6900
BSC6900
ADD IPOAPVC(Mandato Peer IP ry) address Peer IP SET address of VCLLOP(Optional) IPoA PVC.
None
PeerIsValid
BSC6900
ADD UCELLSETUP(Opti onal) ADD Indicating UCELLQUICKSET Peer Cell Is WRFDUP(Optional) Valid Or Not. 040202
PEERMASK
BSC6900
ADD IPPATH(Optional)
BSC6900
ID configured in another RNC of the RNC POOL. In RNC Node Redundancy function, the two RNCs form an RNC POOL and the same physical ADD NodeB is UNODEB(Mandator configured in WRFDy) both RNCs. 040202
PEERPN
BSC6900
WRFD050402 WRFD050404
PeerRncId
Peer RNC ID
BSC6900
This parameter specifies the RNC ID of the ADD peer RNC in UNODEB(Mandator the RNC WRFDy) POOL. 040202 The master CPUS/MPU subsystem ADD slot No. of UIURGCONN(Man neighboring datory) BSC.
PeerSN
BSC6900
WRFD070004
PeerSRN
BSC6900
The master ADD subrack No.of UIURGCONN(Man Neighboring WRFDdatory) BSC. 070004 The master CPUS/MPU subsystem ADD No. of UIURGCONN(Man neighboring datory) BSC.
PeerSSN
BSC6900
WRFD070004
PEERT
Peer type
BSC6900
ADD IPOAPVC(Mandato IPoA PVC ry) peer type The length of the penalty timer of InterRat handover failure due to physical channel failure. No try of Inter-Rat handover will be taken until penalty finishes. Also see parameter InterRatPhyC hFailNum.
WRFD05030105 WRFD050301
BSC6900
SET UINTERRATHOCO V(Optional) SET UINTERRATHONC OV(Optional) ADD UCELLINTERRATH OCOV(Optional) ADD UCELLINTERRATH ONCOV(Optional)
WRFD020305 WRFD020306
BSC6900
Strech for penalty of inter-RAT handover failure. No try of inter-RAT handover to the penalty cell will be ADD taken until UCELLMBDRINTE penalty WRFDRRAT(Optional) finishes. 020303
BSC6900
This parameter specifies the pending-timeafter-trigger for trafficrelated event 4A on DCH. The trafficrelated event 4A on DCH is not reported again during the time defined by this parameter after such an event is reported. This parameter is set to avoid too many channel reconfiguratio n operations. The larger the value of this parameter, the longer the time from the last reporting ADD of trafficUTYPRABDCCCM related event WRFDC(Optional) 4A on DCH to 021101
BSC6900
This parameter specifies the pending-timeafter-trigger for trafficrelated event 4B on DCH. The trafficrelated event 4B on DCH is not reported again during the time defined by this parameter after such an event is reported. This parameter is set to avoid too many channel reconfiguratio n operations. The larger the value of this parameter, the longer the time from the last reporting ADD of trafficUTYPRABDCCCM related event WRFDC(Optional) 4B on DCH to 021101 This parameter specifies the number of pending periods after event A is triggered. During the pending time, no event related to RLC ADD retransmissio UTYPRABRLC(Opti n ratio is WRFDonal) reported. 040100
BSC6900
BSC6900
This parameter specifies the number of pending periods after event B is triggered. During the pending time, no event related to RLC ADD retransmissio UTYPRABRLC(Opti n ratio is WRFDonal) reported. 040100
PERIOD
BSC6900
ADD IPPATH(Optional)
WRFD050402
PeriodFor2B
BSC6900
2B event retry period. If the interfrequency handover base on 2B fails, RNC triggers periodical retry algorithm. This parameter defines the length of the event 2B retry period. The smaller the value of this parameter, the more frequent the handover retry due to interfrequency handover failure, and the faster the SET UE to be UINTERFREQHOC successfully OV(Optional) handed over ADD to the target UCELLINTERFRE cell whose QHOCOV(Optional) load is
WRFD020302 WRFD020304
PeriodFor2C
BSC6900
Retry period for the event 2C. If the interfrequency handover base on 2C fails, RNC triggers periodical retry algorithm. This parameter defines the length of the event 2C retry period. The smaller the value of this parameter, the more frequent the handover retry due to interfrequency SET handover UINTERFREQHON failure, and COV(Optional) the faster the ADD UE to be UCELLINTERFRE successfully QHONCOV(Option handed over WRFDal) to the target 021200
PeriodFor3A
BSC6900
Retry period for the event 3A. This parameter defines the length of the event 3A retry period. The smaller the value of this parameter, the more frequent the handover retry due to inter-RAT handover failure, and the faster the UE to be successfully handed over to the target cell whose load is restored, thus lowering the probability of SET call drops. In UINTERRATHOCO this case, V(Optional) however, ADD frequent UCELLINTERRATH handover WRFDOCOV(Optional) retry brings 020303
PeriodFor3C
BSC6900
Retry period for the event 3C. This parameter defines the length of the event 3C retry period. The smaller the value of this parameter, the more frequent the handover retry due to inter-RAT handover failure, and the faster the UE to be successfully handed over to the target cell whose load is restored, thus lowering the probability of SET call drops. In UINTERRATHONC this case, OV(Optional) however, ADD frequent UCELLINTERRATH handover ONCOV(Optional) retry brings
WRFD020305 WRFD020306
BSC6900
This parameter specifies the number of reporting times of event 1A for periodical reporting. When the actual reporting SET times UINTRAFREQHO( exceeds the Optional) set value, the ADD periodical UCELLINTRAFRE reporting QHO(Optional) ends. This parameter specifies the number of reporting times of event 1C for periodical reporting. When the actual reporting SET times UINTRAFREQHO( exceeds the Optional) set value, the ADD periodical UCELLINTRAFRE reporting QHO(Optional) ends.
WRFD020202 WRFD020203
BSC6900
WRFD020202 WRFD020203
BSC6900
This parameter specifies the number of reporting times of event 1J for periodical reporting. When the actual reporting SET times UINTRAFREQHO( exceeds the Optional) set value, the ADD periodical UCELLINTRAFRE reporting QHO(Optional) ends.
WRFD020202 WRFD020203
BSC6900
Period common measurement protection timer coefficient. Timer length of common measurement report protection = max (10000, this parameter x common measurement report period). The unit is ms. The common measurement report protection timer indicates the maximum length between two valid common measurement SET reports. If the ULDM(Optional) real time SET exceeds the USATLDM(Optional timer length WRFD) of common 020102
BSC6900
It is used to calculate the correspondin g dynamic persist scaling factor for ASC2~ASC7. It is valid for ASC2-ASC7 only and mandatory. For detailed information of this ADD parameter, UPRACHASC(Man refer to 3GPP WRFDdatory) TS 25.214. 010401
PFC
BSC6900
ADD PPPLNK(Optional)
PFC
BSC6900
ADD MPGRP(Optional)
PHB
Per-Hop Behavior
BSC6900
WRFD050402
PHB
PHB
BSC6900
WRFDPHB type of 050420 ADD the IPMUX to WRFDIPMUX(Mandatory) be enabled 050412 Uniquely ADD identifying a UPRACHACTOAS PRACH in a CMAP(Optional) cell.
PhyChId
PRACH ID
BSC6900
WRFD021103
PhyChId
AICH ID
BSC6900
Uniquely identifying an AICH in a WRFDcell. 010101 Uniquely identifying a common physical channel in a cell.
PhyChId
SCCPCH ID
BSC6900
WRFD010101
PhyChId
PCCPCH ID
BSC6900
Uniquely ADD identifying a UPCCPCH(Optiona PCCPCH in a WRFDl) cell. 010101 ADD UPCH(Mandatory) ADD UPICH(Mandatory) ADD USCCPCHBASIC( Mandatory) Uniquely identifying an SCCPCH correspondin g to a paging indication channel in a WRFDcell. 010101
PhyChId
SCCPCH ID
BSC6900
PhyChId
PCPICH ID
BSC6900
PhyChId
PRACH ID
BSC6900
ADD UPRACHASC(Opti onal) ADD UPRACHBASIC(Op tional) ADD UPRACHSLOTFOR MAT(Optional) ADD UPRACHTFC(Optio nal) ADD URACH(Optional)
WRFD010101
PhyChId
PSCH ID
BSC6900
ADD UPSCH(Optional)
WRFD010101
PhyChId
SSCH ID
BSC6900
ADD USSCH(Optional)
BSC6900
ID of the physical ADD channel UCELLMCCH(Man carrying the datory) MCCH. Uniquely identifying a PICH in a cell.
WRFD010101
PICHId
PICH ID
BSC6900
ADD UPICH(Optional)
WRFD010101
PICHMode
PICH mode
BSC6900
ADD UPICH(Optional)
Indicating the number of PIs contained in each frame of the PICH For detailed information of this parameter, refer to 3GPP WRFDTS 25.211. 010301
BSC6900
Difference between the transmit power of PICH and that of PCPICH. For details, refer to the ADD 3GPP TS UCHPWROFFSET( 25.433 WRFDOptional) protocol. 020501 STR IPLOPTST(Mandat Interface ory) Board Slot No None Whether to enable the private key password DISABLE: indicating that the private key password is disabled ENABLE: indicating that SET the private CERTFILE(Optional key password MRFD) is enabled 210305 Indicates the number of the packets for remote STR loopback test ETHOAMLOOPTS of the OAM in WRFDT(Optional) the Ethernet 050425 Indicates the length of the packets for the remote STR loopback test ETHOAMLOOPTS of the OAM in WRFDT(Optional) the Ethernet 050425 STR IPLOPTST(Optional Maximum ) packet length None
PIUSN
BSC6900
PKTCOUNT
PKT Count
BSC6900
PKTLEN
PKT Size[Byte]
BSC6900
BSC6900
PKTSIZE PKTSIZE
BSC6900 BSC6900
Indicates the size of the PING packet, neither IP header nor ICMP header is included. None Sent packet size None Maximum PLMN tag value correspondin g to a LAC. It is defined by the operator. For detailed information of this parameter, refer to 3GPP WRFDTS 25.331. 010101 Minimum PLMN tag value correspondin g to a LAC. It is defined by the operator. For detailed information of this parameter, refer to 3GPP WRFDTS 25.331. 010101
BSC6900
PLPRD
BSC6900
Statistics period of the packet drop ratio. This parameter indicates the period for collecting the statistics information about the packet drop ratio. Note that the unit of this parameter is 100 milliseconds. The actual delay statistics period is the value of this parameter ADD multiplied by IPLOGICPORT(Opt 100 ional) milliseconds. None Packet drop ratio threshold for speed reduction. When the packet drop ratio exceeds the value of this parameter, the rate of the logical port is reduced. Note that the unit of this ADD parameter is IPLOGICPORT(Opt a thousand to ional) one. None
PLTH
BSC6900
PMCTHD
BSC6900
CPU usage threshold for performance monitoring. When the average CPU usage of sliding windows reaches or exceeds the threshold, SET performance FCCPUTHD(Option monitoring is WRFDal) triggered. 040100 Packet queue usage threshold for performance monitoring. When the average packet queue usage of sliding windows reaches or exceeds the threshold, SET performance FCMSGQTHD(Opti monitoring is WRFDonal) triggered. 040100 CPU usage threshold for recovery from performance monitoring. When the average CPU usage of sliding windows is lower than the threshold, SET performance FCCPUTHD(Option monitoring is WRFDal) stopped. 040100
PMCTHD
BSC6900
PMRTHD
BSC6900
PMRTHD
BSC6900
Packet queue usage threshold for recovery from performance monitoring. When the packet queue usage of sliding windows is lower than the threshold, SET performance FCMSGQTHD(Opti monitoring is WRFDonal) stopped. 040100 Whether to monitor the RRM WRFDperformance 040100 MRFD210301 MRFD210304
PMSW
BSC6900
PN
Port No.
BSC6900
PN
Port No.
BSC6900
PN
Port No.
BSC6900
Number of the port Port No. of environment alarm Number of the port where the alarm is generated, only the ports for data transmission are supported, such as E1/T1 port, channelized optical port tributary, ADD optical port, OBJALMSHLD(Man and Ethernet datory) port SET MSPCMD(Mandato ry) SET MSP(Mandatory)
MRFD210304
PN
Port No.
BSC6900
PN
Port No.
BSC6900
WRFD05030101
PN
Port No.
BSC6900
None
PN
Port No.
BSC6900
None
PN
Port No.
BSC6900
PN
Port No.
BSC6900
Indicates the port number SET for running OPTLOP(Mandator this y) command. None SWP ETHPORT(Mandat ory) Port number None
PN
Port No.
BSC6900
None
PN
Port No.
BSC6900
WRFD05030102
PN
Port No.
BSC6900
SET ETHPORT(Optional ) ADD ETHREDPORT(Ma ndatory) ADD ETHIP(Mandatory) ADD ETHMEP(Mandator y) Ethernet port None ADD IPLOGICPORT(Opt FE/GE port ional) number
PN
BSC6900
None
PN
Port No.
BSC6900
STR IPCHK(Optional) STR ETHOAMLOOPTS T(Mandatory) Ethernet port None No. of the CCP port. For detailed information of this parameter, ADD refer to 3GPP UCCP(Mandatory) TS 25.430. ADD Description of ROLLBACKPOINT( the rollback Optional) point
PN
Port No.
BSC6900
WRFD010101 MRFD210301
BSC6900
BSC6900
BEG ROLLBACK(Manda tory) BEG FORWARD(Mandat ory) ADD ROLLBACKPOINT( Name of the Mandatory) rollback point Timer length of the queue poll. The queue is polled for every time specified in this parameter. During each poll, all the expired users are removed from the queue and this user fails in access. Among all the unexpired users, resources are allocated in the order of high priority to low priority. If resource allocation is successful, the user succeeds in access and traverse of SET this queue is UQUEUEPREEMP stopped. T(Optional) Otherwise,
MRFD210301
WRFD010505
POLLTMR
Timer_Poll
BSC6900
Interval of sending the Poll messages. It indicates the period during which the peer end responds after ADD receiving a WRFDSAALLNK(Optional) message. 050301 This port is provided by the FTP server to be visited by the FTP client. None
Port
Destination Port
BSC6900
BSC6900
ADD PORTFLOWCTRL Port protocol PARA(Mandatory) type None Indicates the type of the physical port used by the local maintenance point in the maintenance group. FE indicates the FE port and TRUNK ADD indicates the ETHMEP(Mandator aggregation y) group. ADD Relay switch EMU(Optional) 1 ADD Relay switch EMU(Optional) 2 ADD Relay switch EMU(Optional) 3 ADD Relay switch EMU(Optional) 4
Port Type Switch for Relay 1 Switch for Relay 2 Switch for Relay 3 Switch for Relay 4
POWER_REL AY5 Switch for Relay 5 POWER_REL AY6 Switch for Relay 6
BSC6900 BSC6900
MRFD210304 MRFD210304
BSC6900
The power offset between the last access preamble and the message control part. The power of the message control part can be obtained by adding the offset to the access preamble power. For detailed information of this ADD parameter, UPRACHTFC(Man refer to 3GPP WRFDdatory) TS 25.213. 020501 The power increase step of the random access preambles transmitted before the UE receives the acquisition indicator in the random access process. For detailed information of this ADD parameter, UPRACHBASIC(Op refer to 3GPP WRFDtional) TS 25.211. 020501
BSC6900
PPPLNKN
BSC6900
ADD PPPLNK(Optional)
PPPLNKN
BSC6900
PPPLNKN
BSC6900
PPP link number PPP link number Whether to enable the PPP frame multiplexing function. If this parameter is set to ENABLE, the PPP frame multiplexing function is enabled. If this parameter is set to DISABLE, the PPP frame multiplexing function is disabled.
PPPMUX
PPP mux
BSC6900
PQNUM
BSC6900
This parameter applies to the FG2a, GOUa, and UOIa(IP) boards. For the boards working in ATM transmission mode, this parameter is always set to 2. For the FG2c, GOUc, or POUc board, this ADD parameter is PORTFLOWCTRL always set to PARA(Optional) 2. None Uniquely identifying a PRACH in a cell correspondin WRFDg to the AICH. 010101
PRACHPhyCh Id PRACH ID
BSC6900
ADD UAICH(Optional)
Interfrequency measurement reporting interval. In periodical report mode, the interval between two reports is the configured value. However, it is not recommende d that the value "NON_PERIO DIC_REPOR T" be set, upon which the UE behaviour is not defined. This parameter SET has impact on UINTERFREQHOC the Uu OV(Optional) signaling flow. ADD If the interval UCELLINTERFRE is too short QHOCOV(Optional) and the ADD frequency is UCELLMBDRINTE too high, the WRFDRFREQ(Optional) RNC may 020302 The maximum number of preambles transmitted in a preamble ramping cycle. For detailed information of this ADD parameter, UPRACHBASIC(Op refer to 3GPP WRFDtional) TS 25.211. 020501
BSC6900
BSC6900
Sequence No. of an available preamble signature. A maximum of 16 signatures (from signature 0 to 15) can be selected. For detailed information of this ADD parameter, UPRACHBASIC(Ma refer to 3GPP WRFDndatory) TS 25.213. 020501 Indicating SET whether UQUEUEPREEMP preemption is WRFDT(Optional) supported. 010505
BSC6900
Indicating whether ARPbased preemption between TCs is supported. This switch only has impact on the TC-based priorities. When the priority is based on the TC and the switch is enabled, for the following two situations, the preempting service should have a higher priority and ARP priority than the preempted service does: 1.The preempting service is the SET streaming UQUEUEPREEMP service and WRFDT(Optional) the 010505 Printing control threshold. If the CPU usage of sliding windows reaches or exceeds the threshold, printing flow control is SET triggered on FCCPUTHD(Option the serial al) port.
PRINTCTHD
BSC6900
WRFD040100
PRINTCTHD
BSC6900
Printing control threshold. When the packet queue usage of sliding windows reaches or exceeds the threshold, printing flow control is SET triggered on FCMSGQTHD(Opti the serial WRFDonal) port. 040100 Printing control threshold. If the CPU usage of sliding windows is lower than the threshold, printing flow SET control on the FCCPUTHD(Option serial port is WRFDal) stopped. 040100 Printing control threshold. When the packet queue usage of sliding windows is lower than the threshold, printing flow SET control on the FCMSGQTHD(Opti serial port is WRFDonal) stopped. 040100 Whether to control the printing flow on the serial port
PRINTRTHD
BSC6900
PRINTRTHD
BSC6900
PRINTSW
BSC6900
SET FCSW(Optional)
WRFD040100
PRIORITY
Route priority
BSC6900
PRIORITY
BSC6900
Priority of the signaling link. 0 indicates the highest priority. A lowpriority link ADD carries MTP3LNK(Optional services only ) when the highADD priority link is WRFDM3LNK(Optional) faulty. 050301
PRIORITY
Priority
BSC6900
ADD IPRT(Mandatory)
Route priority. The boards FG2a, GOUa, UOIa(IP), FG2c, and GOUc support the configuration of routes with different priorities. Suppose two or more routes are configured and their addresses and masks are the same, and the addresses of the next hops and priorities. These routes can be configured in the active and standby mode. When the route with higher priority is available and only this route is valid, the system None
Priority
Block priority
BSC6900
BLK UCELL(Optional)
1.There are three block priorities: high, normal and low. 2.High priority: Blocking a cell immediately. 3.Normal priority: Blocking a cell once there are no users in it within a specified time, or blocking it even if there are some users when the specified time expires. 4.Low priority: Blocking a cell when there are no users in the WRFDcell. 020101
BSC6900
Reference used to determine which priority is arranged first in the priority sequence. If the ARP is preferably used, the priority sequence is gold > silver > copper. If the ARPs are all the same, the TrafficClass is used and the priority sequence is conversationa l > streaming > interactive > background. If the TrafficClass is preferably used, the priority sequence is conversationa SET l > streaming UUSERPRIORITY( > interactive > Optional) background.
BSC6900
ADD USPG(Optional)
This parameter specifies the capability of the cells with a specific [Service priority group Identity] for extension services, such as CMB and MBMS. The value 0 means that these cells do not support extension services. The value 1 indicates the highest priority, i.e. extension services are preferably absorbed by this group of cells. The value 7 indicates the lowest WRFDpriority. 020806
BSC6900
ADD USPG(Optional)
This parameter specifies the capability of the cells with a specific [Service priority group Identity] for HSDPA services. The value 0 means that these cells do not support HSDPA services. The value 1 indicates the highest priority, i.e. HSDPA services are preferably absorbed by this group of cells. The value 7 indicates the lowest WRFDpriority. 020806
BSC6900
ADD USPG(Optional)
This parameter specifies the capability of the cells with a specific [Service priority group Identity] for HSUPA services. The value 0 means that these cells do not support HSUPA services. The value 1 indicates the highest priority, i.e. HSUPA services are preferably absorbed by this group of cells. The value 7 indicates the lowest WRFDpriority. 020806
BSC6900
ADD USPG(Optional)
This parameter specifies the capability of the cells with a specific [Service priority group Identity] for R99 non-realtime services. The value 0 means that these cells do not support R99 non-realtime services. The value 1 indicates the highest priority, i.e. R99 non-realtime services are preferably absorbed by this group of cells. The value 7 indicates the lowest WRFDpriority. 020806
PriorityService Service priority of ForR99RT R99 RT service Private Key File Name
BSC6900
PrivKey
BSC6900
This parameter specifies the capability of the cells with a specific [Service priority group Identity] for R99 real-time services. The value 0 means that these cells do not support R99 real-time services. The value 1 indicates the highest priority, i.e. R99 real-time services are preferably absorbed by this group of cells. The value 7 indicates the ADD lowest USPG(Optional) priority. SET Name of the CERTFILE(Optional private key ) file This parameter ADD specifies the UCNOPALLCELLB processing LK(Mandatory) duration of ADD the cell URNCALLCELLBL blocking in K(Mandatory) the RNC.
WRFD020806 MRFD210305
WRFD020114
PROCESSS WITCH
Process switch
BSC6900
1) INVOKE_TR ACE_SWITC H. When it is checked, RNC will start Invoke Trace procedure upon receiving INVOKE TRACE Message form CN, otherwise, RNC won't start the Invoke Trace procedure though it receives the INVOKE TRACE message. 2) SYS_INFO_U PDATE_FOR _IU_RST. When it is checked, RNC will broadcast SET SYSTEM URRCTRLSWITCH INFORMATI (Optional) ON
WRFD010101 WRFD020124
PROT
BSC6900
Identifies the DSP protocol type, including ITUT(Internati onal Telecommuni cation Union Telecommuni cation Standardizati on Sector), ANSI(Americ an National Standards Institute), and TTC(Telecom munication Technology ADD Committee N7DPC(Optional) (Japan)). After sending release request to RRC layer, if the Background Radio Access Bear haven't been released until the Background service T2 timeout, the PDCP layer will resend SET release UPSINACTTIMER( request Optional) indication.
WRFD050301
WRFD010510
BSC6900
BSC6900
After sending release request to RRC layer, if the Conversation al Radio Access Bear haven't been released until the Conversation al service T2 timeout, the PDCP layer will resend SET release UPSINACTTIMER( request Optional) indication. After sending release request to RRC layer, if the IMS Radio Access Bear for signal haven't been released until the IMS service T2 timeout, the PDCP layer will resend SET release UPSINACTTIMER( request Optional) indication.
WRFD010510
WRFD010510
BSC6900
After sending release request to RRC layer, if the Interactive Radio Access Bear haven't been released until the Interactive service T2 timeout, the PDCP layer will resend SET release UPSINACTTIMER( request WRFDOptional) indication. 010510 After sending release request to RRC layer, if the Streaming Radio Access Bear haven't been released until the Streaming service T2 timeout, the PDCP layer will resend SET release UPSINACTTIMER( request WRFDOptional) indication. 010510
BSC6900
PS
Port select
BSC6900
SET E1T1(Optional)
PS
Port select
BSC6900
PS
Port select
BSC6900
SET COPTLNK(Mandato WRFDry) Port selection 05030102 Indicating whether to replace relocation procedure with DSCR procedure between the RNC and the Neighboring RNC for PS WRFDBE Traffic. 021400
BSC6900
ADD UNRNC(Optional)
PSBKGDL
WCDMA R99 PS background ADD service TRMFACTOR(Opti downlink WRFDonal) factor 050406
WRFD050406
R99 PS background primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the PS ADD background WRFDLOADEQ(Optional) service. 050404
WRFD050406
R99 PS background PSBKGSECW pri sec path load HT ratio threshold BSC6900
R99 PS background primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the PS ADD background WRFDLOADEQ(Optional) service. 050404
PSBKGUL
WCDMA R99 PS ADD background TRMFACTOR(Opti service uplink WRFDonal) factor 050406 Offset of the PSCH transmit power from the PCPICH transmit power in a cell.
PSCHPower
BSC6900
ADD UPSCH(Optional)
WRFD020501
PSCONVDL
BSC6900
WCDMA R99 PS conversationa ADD l service TRMFACTOR(Opti downlink WRFDonal) factor 050406
BSC6900
R99 PS conversationa l primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the PS ADD conversationa WRFDLOADEQ(Optional) l service. 050404
BSC6900
R99 PS conversational pri PSCONVSEC sec path load ratio WHT threshold
BSC6900
R99 PS conversationa l primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the PS ADD conversationa WRFDLOADEQ(Optional) l service. 050404
PSCONVUL
WCDMA R99 PS ADD conversationa TRMFACTOR(Opti l service WRFDonal) uplink factor 050406 Primary ADD downlink UEXT3GCELL(Man scrambling datory) code.
BSC6900
WRFD020203
BSC6900
Sequence No. of a DL primary scrambling code in a cell. ADD For detailed UCELLSETUP(Man information of datory) this ADD parameter, UCELLQUICKSET refer to 3GPP WRFDUP(Mandatory) TS 25.413. 022000
BSC6900
R99 PS high interactive primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the PS high ADD interactive WRFDLOADEQ(Optional) service. 050404
R99 PS high PSHIGHINTE interactive pri sec RACTSECW path load ratio HT threshold
BSC6900
R99 PS high interactive primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the PS high ADD interactive WRFDLOADEQ(Optional) service. 050404
BSC6900
PS domain Relocation GSM load THD. This parameter specifies the PS domain relocation GSM load threshold. When the GSM load policy is used, that is, when [NcovHoOn2 GldInd] in SET INTERRATH ONCOV is set to ON, the PS domain inter-system relocation out process will be stopped if the GSM system send its cell load to SET the RNC and UINTERRATHONC the cell load OV(Optional) exceeds the ADD PS domain UCELLINTERRATH Reloc GSM ONCOV(Optional) load THD.
When detecting that the Ps' Background User had no data to transfer for a long time which longer than this timer, the PDCP layer would request the RRC layer SET to release this UPSINACTTIMER( Radio Access WRFDOptional) Bear. 010510
BSC6900
When detecting that the Ps' Conversation al User had no data to transfer for a long time which longer than this timer, the PDCP layer would request the RRC layer SET to release this UPSINACTTIMER( Radio Access WRFDOptional) Bear. 010510 When detecting that the Ps' IMS signal had no data to transfer for a long time which longer than this timer, the PDCP layer would request the RRC layer SET to release this UPSINACTTIMER( Radio Access WRFDOptional) Bear. 010510
BSC6900
BSC6900
When detecting that the Ps' Interactive User had no data to transfer for a long time which longer than this timer, the PDCP layer would request the RRC layer SET to release this UPSINACTTIMER( Radio Access WRFDOptional) Bear. 010510 Fast Dormancy had no data to transfer for a long time which longer than this timer, the PDCP layer would request the RRC layer SET to release this UPSINACTTIMER( Radio Access WRFDOptional) Bear. 010510 When detecting that the Ps' Streaming User had no data to transfer for a long time which longer than this timer, the PDCP layer would request the RRC layer SET to release this UPSINACTTIMER( Radio Access WRFDOptional) Bear. 010510
BSC6900
BSC6900
BSC6900
Indicating whether the PS domain permits the SET CN UOPERATORCFG information to WRFDPARA(Optional) update . 021306
BSC6900
WRFD021306
PSINTERDL
BSC6900
WCDMA R99 PS interactive ADD service TRMFACTOR(Opti downlink WRFDonal) factor 050406
PSINTERUL
BSC6900
WCDMA R99 ADD PS interactive TRMFACTOR(Opti service uplink WRFDonal) factor 050406
PSINTHGHP RIPATH
BSC6900
WRFD050406
PSINTHGHS ECPATH
BSC6900
WRFD050406
BSC6900
WRFD050406
BSC6900
WRFD050406
WRFD050406
WRFD050406
BSC6900
R99 PS low interactive primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the PS low ADD interactive WRFDLOADEQ(Optional) service. 050404 R99 PS low interactive primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the PS low ADD interactive WRFDLOADEQ(Optional) service. 050404
R99 PS low PSLOWINTE interactive pri sec RACTSECW path load ratio HT threshold
BSC6900
BSC6900
R99 PS middle interactive primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the PS middle ADD interactive WRFDLOADEQ(Optional) service. 050404 R99 PS middle interactive primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the PS middle ADD interactive WRFDLOADEQ(Optional) service. 050404
R99 PS mid pri sec PSMIDINTER path load ratio ACTSECWHT threshold BSC6900
This parameter specifies feature mode of operators in the PS domain. You should configure the network resource identifier (NRI) when SET MOCN or IuUOPERATORCFG Flex is PARA(Optional) supported.
WRFD021302 WRFD021311
WRFD021302 WRFD021311
BSC6900
Threshold of PS call drop ratio per CPUS to report KPI alarm.In a checking period, if the ratio is higher than this threshold and the number of PS call release is higher than the related threshold, the KPI alarm of SET PS call drop UKPIALMTHD(Opti ratio is WRFDonal) reported. 010510
BSC6900
The minimum number of PS RAB establish request per CPUS to report KPI alarm. In a checking period,if the number of PS RAB establish request is higher than the threshold and the PS RAB setup successful ratio is lower than this threshold,the KPI alarm of SET PS RAB UKPIALMTHD(Opti setup ratio is WRFDonal) reported. 010510
Threshold of PS RAB setup successful ratio per CPUS to report KPI alarm. In a checking period,if the ratio is lower than this threshold and the number of PS RAB establish request is higher than the related threshold,the KPI alarm of SET PS RAB UKPIALMTHD(Opti setup ratio is WRFDonal) reported. 010510
The minimum number of PS call release per CPUS to report KPI alarm.In a checking period, if the number of PS call release is higher than the related threshold and the PS call drop ratio is higher than this threshold, the KPI alarm SET of PS call UKPIALMTHD(Opti drop ratio is WRFDonal) reported. 010510
BSC6900
Specifies whether to impose the ADD access UCELLDSACMANU restriction on ALPARA(Mandatory the PS WRFD) domain. 020114 Whether to impose the access restriction on the PS domain. Indicating whether the cell allows PS service interRAT handover. ON: PS service interRAT handover is enabled. OFF: PS service interRAT handover is disabled. Service handover refers to the handover attribute and related parameter configuration on the network side for each service. When a service is established, the related measurement s and interRAT
BSC6900
WRFD020114
BSC6900
WRFD020305
PSSTRMDL
BSC6900
WCDMA R99 PS streaming ADD service TRMFACTOR(Opti downlink WRFDonal) factor 050406
BSC6900
WRFD050406
BSC6900
R99 PS streaming primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the PS ADD streaming WRFDLOADEQ(Optional) service. 050404
BSC6900
WRFD050406
R99 PS streaming PSSTRMSEC pri sec path load WHT ratio threshold
BSC6900
R99 PS streaming primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the PS ADD streaming WRFDLOADEQ(Optional) service. 050404
PSSTRMUL
BSC6900
WCDMA R99 ADD PS streaming TRMFACTOR(Opti service uplink WRFDonal) factor 050406
PsSwitch
PS rate negotiation switch. 1) PS_BE_EXT RA_LOW_RA TE_ACCESS _SWITCH: When the switch is on, access at a rate of 0 kbit/s or on the FACH is determined according to the current connection state of the RRC if the PS BE admission and the later preemption and queuing fail. 2) PS_BE_INIT_ RATE_DYNA MIC_CFG_S WITCH: When the switch is on, SET the initial rate UCORRMALGOSW of the service ITCH(Optional) should be Max SET throughput of LICENSE(Optional) PS SET SLFSLVSW(Option al) SET ALMPORT(Mandat ory)
PSW
PT
Port Type
BSC6900
Switch for the self-healing of the OMU processes None Port type of environment MRFDalarm 210304
PT
Port
BSC6900
Number of the port that provides the time ADD information SNTPSRVINFO(Ma on the SNTP ndatory) server None
PTCODE
Line code
BSC6900
SET E1T1(Optional)
WRFD05030101
PTIP
BSC6900
PTIPMASK
BSC6900
Subnet mask ADD of NodeB UNODEBESN(Man ETH/TRUNK WRFDdatory) port 031101 This parameter specifies whether MBMS PTM nonstreaming bearers can be preempted by other MBMS SET PTM bearers URNCMBMSPARA( or non-MBMS WRFDOptional) bearers. 01061602
BSC6900
BSC6900
This parameter specifies whether MBMS PTM streaming bearers can pre-empt other MBMS PTM bearers SET and nonURNCMBMSPARA( MBMS WRFDOptional) bearers. 01061602 This parameter specifies whether MBMS PTM streaming bearers can be preempted by other MBMS SET PTM bearers URNCMBMSPARA( or non-MBMS WRFDOptional) bearers. 01061602
BSC6900
PTRXT
BSC6900
SET E1T1(Optional)
WRFD05030101
PTTXT
BSC6900
SET E1T1(Optional)
WRFD05030101
PTTYPE
Frame Structure
BSC6900
PTYPE
BSC6900
PubCert
BSC6900
SET E1T1(Optional) SET ETHPORT(Mandat ory) SET CERTFILE(Optional ) SET ULDM(Optional) SET USATLDM(Optional )
Frame structure
WRFD05030101
Ethernet port type None Name of the MRFDcertificate file 210305 Length of smoothing filter window of potential user control (PUC).
BSC6900
WRFD020102
BSC6900
Identifying the potential user control period. When the cell load is high, the cell selection and reselection can be periodically modified in order to enable users in unconnected SET mode to ULDCPERIOD(Opti select other onal) cells more SET easily, thus USATLDCPERIOD( reducing the WRFDOptional) local cell load. 020105 This parameter specifies the coefficient of the penalty time after the PTP RB admission fails. The penalty time is MCCH modification period multiplied by this parameter. During the penalty time, users in the cell are not SET allowed to URNCMBMSPARA( initiate PTP WRFDOptional) RB requests. 01061602 SET CERTFILE(Mandat Private key MRFDory) password 210305
PunishTime
BSC6900
PWD
BSC6900
PWD
Password
BSC6900
ADD OP(Mandatory) DLD LICENSE(Mandator y) ULD LICENSE(Mandator y) Password Minimum SET length of the PWDPOLICY(Optio user nal) password First alarm switch of power SET distribution PWRALMSW(Optio monitoring nal) board
MRFD210305
PwdMinLen
MRFD210305
PWRALMSS W1
BSC6900
MRFD210304
PWRALMSS W2
BSC6900
Second alarm switch of power SET distribution PWRALMSW(Optio monitoring MRFDnal) board 210304
PwrCtrlAlg
BSC6900
SET UFRC(Optional)
This parameter is used to inform the UE of the method for translating the received Transmit Power Control (TPC) commands. In other words, it is used to select UL power control algorithm. When using the ALGORITHM 1, the UE adjusts the uplink transmit power for every timeslot. When using the ALGORITHM 2, the UE adjusts the uplink transmit WRFDpower on a 5- 020504
Minimum DSCP of queue 0. The IP packets with DSCP in a relation that "Min DSCP of queue 0" <= SET DSCP <= 63 QUEUEMAP(Optio is added to WRFDnal) queue 0. 050424
Minimum DSCP of queue 1. The IP packets with DSCP in a relation that "Min DSCP of queue 1" <= DSCP < "Min DSCP of SET queue 0" is QUEUEMAP(Optio added to WRFDnal) queue 1. 050424 Minimum DSCP of queue 2. The IP packets with DSCP in a relation that "Min DSCP of queue 2" <= DSCP < "Min DSCP of SET queue 1" is QUEUEMAP(Optio added to WRFDnal) queue 2. 050424 Minimum DSCP of queue 3. The IP packets with DSCP in a relation that "Min DSCP of queue 3" <= DSCP < "Min DSCP of SET queue 2" is QUEUEMAP(Optio added to WRFDnal) queue 3. 050424
Minimum DSCP of queue 4. The IP packets with DSCP in a relation that "Min DSCP of queue 4" <= DSCP < "Min DSCP of queue 3" is added to queue 4. The IP packets with DSCP in a relation that 0 <= DSCP < "Min DSCP of SET queue 4" is QUEUEMAP(Optio added to WRFDnal) queue 5. 050424
QAAL2VER
BSC6900
Function set of the adjacent node supported by local BSC6900. When the parameter is set to CS1, it indicates that the local BSC6900 is interconnecte d to the adjacent node by using the CS1 protocol version. When the parameter is set to CS2, it indicates that the local BSC6900 is interconnecte d to the adjacent node by using the CS2 protocol ADD version. The ADJNODE(Optional CS2 protocol WRFD) version is 05030104
Qhcs
Qhcs
Quality threshold of HCS cell reselection. It can be used to calculate the quality level of the specified cell ADD in HCS UCELLHCS(Option reselection H al) rules.
WRFD021200 WRFD020110
Qhyst1sfach
BSC6900
This parameter indicates that in the CELL_FACH connection mode, the measurement hysteresis of the UE is 1. It is used when CPICH RSCP is used in cell selection and reselection measurement . This parameter is not configured when the value is 255. Otherwise, the greater the parameter value is, the harder the cell selection happens. For detailed ADD information, UCELLSELRESEL( refer to 3GPP Optional) TS 25.304.
Qhyst1spch
This parameter indicates that in the CELL_PCH or URA_PCH connection mode, the measurement hysteresis of the UE is 1. It is used when CPICH RSCP is used in cell selection and reselection measurement . This parameter is not configured when the value is 255. Otherwise, the greater the parameter value is, the harder the cell selection happens. For detailed ADD information, UCELLSELRESEL( refer to 3GPP Optional) TS 25.304.
Qhyst2sfach
This parameter indicates that in the CELL_FACH connection mode, the measurement hysteresis of the UE is 2. It is used when CPICH EcNo is used in cell selection and reselection measurement . This parameter is not configured when the value is 255. Otherwise, the greater the parameter value is, the harder the cell selection happens. For detailed ADD information, UCELLSELRESEL( refer to 3GPP Optional) TS 25.304.
Qhyst2spch
This parameter indicates that in the CELL_PCH or URA_PCH connection mode, the measurement hysteresis of the UE is 2. It is used when CPICH EcNo is used in cell selection and reselection measurement . This parameter is not configured when the value is 255. Otherwise, the greater the parameter value is, the harder the cell selection happens. For detailed ADD information, UCELLSELRESEL( refer to 3GPP Optional) TS 25.304.
Qoffset1sn
Qoffset1sn[dB]
BSC6900
Offset between the neighboring GSM cell and WCDMA cell. This specifies the offset of the measurement value of the neighboring GSM cell signal quality. This parameter is used for RSSI measurement . The offset is subtracted from the neighboring cell measurement value before cell reselection. In cell reselection algorithm, this parameter is used for moving the ADD border of a U2GNCELL(Option cell. Content: WRFDal) During cell 010802
Qqualmin
This parameter defines the CPICH Ec/No access threshold of the cell. The UE can camp on the cell only when the measured CPICH Ec/No is greater than the value of this parameter. For FDD cells, the cell selection criterion S in the 25.304 protocol is defined as follows: Srxlev>0 AND Squal>0 Where: - Squal = Qqualmeas Qqualmin - Srxlev = Qrxlevmeas ADD Qrxlevmin UEXT3GCELL(Man Pcompensati datory) on
WRFD010801 WRFD010802
Qqualmin
The minimum required quality threshold correspondin g to CPICH Ec/No. The UE can camp on the cell only when the measured CPICH Ec/No is greater than the value of this parameter. The higher the parameter value is, the more difficult it is for the UE to reside in the cell. The lower parameter value is, the easier it is for the UE to reside in the cell, but it is possible that the UE ADD cannot UCELLSELRESEL( receive the Optional) system
WRFD010801 WRFD010802
QqualminInd
This parameter indicates whether to configure the minimum quality level. When it is set to FALSE, the UE adopts the correspondin g value of the current serving cell, added through the ADD UCELLSELR ESEL command. This parameter is generally set to FALSE. When it is set to TRUE, the UE adopts the value in ADD ADD UEXT3GCELL(Opti UEXT3GCEL WRFDonal) L command. 010802
Qrxlevmin
Min RX level[dBm]
BSC6900
This parameter defines the CPICH RSCP access threshold of the cell.This parameter is the minimum required RX level that corresponds to CPICH RSCP. The UE can camp on the cell only when the measured CPICH RSCP is greater than the value of this parameter. The settings of "Qrxlevmin" and "Qqualmin" should be considered along with each other. ADD As for the UEXT3GCELL(Man impact on datory) network
WRFD010801 WRFD010802
Qrxlevmin
Min RX level[dBm]
BSC6900
Minimum RX level of the GSM cell. Before the UE camps on the cell, take the measurement of the signal quality in the cell. If the quality is better than this parameter, this indicates that the cell can obtain better QoS and the UE is allowed to camp on this cell. Otherwise, the UE cannot obtain good QoS in this cell and ADD does not U2GNCELL(Option camp on the al) cell.
WRFD010801 WRFD010802
Qrxlevmin
The minimum required RX threshold correspondin g to CPICH RSCP. The UE can camp on the cell only when the measured CPICH RSCP is greater than the value of this parameter. The setting of Qrxlevmin should be related to Qqualmin. The higher the parameter is, the more difficult it is for the UE to reside in the cell. The lower parameter is, the easier it is for the UE to reside in the ADD cell, but it is UCELLSELRESEL( possible that Optional) the UE
WRFD010801 WRFD010802
This parameter indicates whether the actual value of Qrxlevmin should be added with the value of DeltaQrxlevm in or not. If QrxlevminExt Sup is set to TRUE, then Qrxlevmin = Qrxlevmin + DeltaQrxlevm in; Otherwise, the value of ADD Qrxlevmin UEXT3GCELL(Opti does not WRFDonal) change. 010802 Indicating whether the actual value of Qrxlevmin should be added with the value of DeltaQrxlevm in or not. If QrxlevminExt Sup is set to TRUE, then Qrxlevmin = Qrxlevmin + DeltaQrxlevm in; Otherwise, the value of Qrxlevmin does not change. For detailed information of this parameter, ADD refer to 3GPP UCELLSELRESEL( TS 25.331 WRFDOptional) 10.3.2.3. 010801
BSC6900
This parameter indicates whether to configure the minimum RX level. When it is set to FALSE, the UE adopts the correspondin g value of the current serving cell, added through the ADD UCELLSELR ESEL command. This ADD parameter is UEXT3GCELL(Opti generally set WRFDonal) to FALSE. 010802 Measurement quantity of cell selection and reselection. It can be set to CPICH Ec/N0 or CPICH RSCP. For detailed information of this ADD parameter, UCELLSELRESEL( refer to 3GPP Optional) TS 25.304.
QualMeas
WRFD010801 WRFD010802
BSC6900
Indicating whether queue is supported. When a user initiates a call, if cell resources are insufficient and the user is queue supportive, the RNC tries to arrange this user to join the queue SET to increase UQUEUEPREEMP access WRFDT(Optional) success ratio. 010505
QueueLen
Queue length
BSC6900
Queue length. The total number of users in queue of each cell should not exceed the value specified in this parameter. When a new user needs queuing, 1) If the queue has vacancy, the user joins the queue immediately. 2) If the queue is full and there is a user whose queue time exceeds the allowed maximum queue time, this user is out of the queue and SET access fails. UQUEUEPREEMP At the same WRFDT(Optional) time, the new 010505 ADD UTYPRABQUALIT YMEAS(Mandatory) ADD UTYPRABDCCCM C(Mandatory) ADD UTYPRABHSPA(M andatory) ADD UTYPRABRLC(Ma ndatory)
RabIndex
BSC6900
Index number uniquely identifying the configuration of the typical service parameters.
RabIndex
BSC6900
This parameter specifies the index number that identifies the ADD configuration UTYPRABBASIC(M of a typical andatory) RAB. This parameter specifies the index number that identifies the ADD configuration UTYPRABOLPC(M of a typical andatory) RAB.
RabIndex
BSC6900
BSC6900
The timer is started when the RNC initiates the RAB Modify procedure. If RAB modify message is received from the CN when this timer is actived, the rate information assigned by CN when establishing traffic will be reserved as SET the new UCOIFTIMER(Optio assigned rate WRFDnal) is used. 021101
RAC
BSC6900
ADD UEXT3GCELL(Man datory) ADD UEXT2GCELL(Man datory) ADD UCELLSETUP(Man datory) ADD UCELLQUICKSET UP(Mandatory) ADD URAC(Mandatory)
Identifying a routing area in a location area for a PLMN of GSM-MAP type. It is defined by the operator. For detailed information of this parameter, refer to 3GPP WRFDTS 23.003. 010101
Sequence No. of an available sub channel. A maximum of 12 sub channels (from sub channel 0 to 11) can be selected. For detailed information of this ADD parameter, UPRACHBASIC(Ma refer to 3GPP WRFDndatory) TS 25.214. 010101
RafcTmr
Trafc[ms]
BSC6900
A timer used to wait for the SET reset UIUTIMERANDNU response WRFDM(Optional) from CN. 010101
BSC6900
When RAN Sharing SET Supported, UOPERATORSHA RNC can RINGMODE(Option configure al) multi-plmn.
RatCellType
BSC6900
Identifying the type of the inter-RAT cell NO_CAPABIL ITY indicates that the capacity of the GSM cell remains unknown. It is not recommende d to set the cell type to NO_CAPABIL ITY. If the cell type is NO_CAPABIL ITY, the interRAT ADD handover UEXT2GCELL(Man cannot be datory) triggered.
RatcTmr
Tratc[ms]
BSC6900
BSC6900
The rate matching factor of a transport channel.For detailed information of this parameter, refer to 3GPP WRFDTS 25.212. 021000
BSC6900
This parameter defines the rate matching ADD factor of the URACH(Optional) DL RACH. fast TF restriction refers to a situation where, when the cell is overloaded and congested, the downlink TF can be adjusted to restrict the number of blocks transported in each TTI at the MAC layer and the rate of user data, thus reducing the cell downlink load. This parameter defines the downlink data rate recover timer length in fast TF restriction. RateRstrctTi ADD merLen and UCELLOLC(Option RateRecover al) TimerLen are
WRFD021000
WRFD020107
BSC6900
DL fast TF restriction refers to a situation where, when the cell is overloaded and congested, the downlink TF can be adjusted to restrict the number of blocks transported in each TTI at the MAC layer and the rate of user data, thus reducing the cell downlink load. This parameter defines the downlink data rate restrict coefficient in fast TF restrict The smaller this ADD parameter is, UCELLOLC(Option the larger the WRFDal) TF restrict 020107
BSC6900
DL fast TF restriction refers to a situation where, when the cell is overloaded and congested, the downlink TF can be adjusted to restrict the number of blocks transported in each TTI at the MAC layer and the rate of user data, thus reducing the cell downlink load. This parameter defines the time length of the downlink OLC fast TF restriction. RateRstrctTi merLen and ADD RateRecover UCELLOLC(Option TimerLen are WRFDal) effective only 020107
RBPTYPE
BSC6900
LASTRBP indicates the last rollback point. The system automatically takes the position where the current configuration command is executed as the rollback point, and the user does not need to specify a rollback point. APPOINTRB P indicates the rollback BEG point FORWARD(Mandat specified by MRFDory) the user. 210301
A timer used to wait for the RB reconfiguratio n response from UE in the RB SET procedure.Re USTATETIMER(Op fer to the WRFDtional) Note. 010101
A timer to RNC wait for the RB release response from UE in the RB SET procedure.R USTATETIMER(Op efer to the WRFDtional) Note. 010101
A timer to RNC wait for the RB setup response from UE in the RB SET procedure.Re USTATETIMER(Op fer to the WRFDtional) Note. 010101
RCDT
BSC6900
Type of recording the execution result 1. REC_ALL: indicating that the execution results of all the commands are recorded no matter whether the commands are executed successfully. 2. REC_ERR: indicating that only the execution results of failed commands are recorded. 3. REC_NON: indicating that the execution results of all the commands are not RUN recorded no BATCHFILE(Option matter al) whether the None
RDC
BSC6900
Speed reduction efficient of the logical port. When detecting link congestion through IPPM, the system reduces the bandwidth rate of the logical port by using the value of the bandwidth ADD multiplied by IPLOGICPORT(Opt this ional) parameter. None This parameter specifies the interval SET between URNCMBMSPARA( recounting Optional) operations.
BSC6900
WRFD01066001
RecoverCoef
DL fast TF restriction refers to a situation where, when the cell is overloaded and congested, the downlink TF can be adjusted to restrict the number of blocks transported in each TTI at the MAC layer and the rate of user data, thus reducing the cell downlink load. This parameter defines the downlink OLC fast TF rate recovery coefficient. The greater this ADD parameter is, UCELLOLC(Option the larger the WRFDal) TF restrict 020107 Speed reduction ADD alarm IPLOGICPORT(Opt recovery ional) threshold Whether to back up the data of the board
BSC6900
None
RED
Backup
BSC6900
ADD BRD(Mandatory)
MRFD210301
BSC6900
This parameter specifies the target frequency ADD band in the UCELLDRD(Option redirection al) process.
WRFD020400 WRFD02040003
BSC6900
SET UDRD(Optional)
This parameter specifies the target frequency band in the redirection procedure.
WRFD020400 WRFD02040003
BSC6900
This parameter specifies the frequency band of the target UL and DL UARFCNs ADD to which the UCELLREDIRECTI UE is WRFDON(Optional) redirected. 020120 This parameter specifies the frequency band of the target UL and DL UARFCNs SET to which the UREDIRECTION(O UE is WRFDptional) redirected. 020120
BSC6900
BSC6900
When the UL load state or DL load state of the serving cell is LDR(basic congestion) or OLC(overload congestion), a UE may be redirected to another cell according to the traffic type. This parameter specifies the possibility of redirecting the UE to another cell. When this parameter is set to 0, the RRC redirection is not performed if the load ADD state on the UCELLREDIRECTI serving cell is WRFDON(Optional) LDR or OLC. 020120
BSC6900
When the UL load state or DL load state of the serving cell is LDR(basic congestion) or OLC(overload congestion), a UE may be redirected to another cell according to the traffic type. This parameter specifies the possibility of redirecting the UE to another cell. When this parameter is set to 0, the RRC redirection is not performed if the load SET state on the UREDIRECTION(O serving cell is WRFDptional) LDR or OLC. 020120
BSC6900
When the load of the serving cell is within the normal range, a UE may be redirected to another cell according to the traffic type. This parameter specifies the possibility of redirecting the UE to another cell. When this parameter is set to 0, the RRC redirection is not performed if the load of the serving ADD cell is within UCELLREDIRECTI the normal WRFDON(Optional) range. 020120
BSC6900
When the load of the serving cell is within the normal range, a UE may be redirected to another cell according to the traffic type. This parameter specifies the possibility of redirecting the UE to another cell. When this parameter is set to 0, the RRC redirection is not performed if the load of the serving SET cell is within UREDIRECTION(O the normal WRFDptional) range. 020120
RedirSwitch
Redirection Switch
BSC6900
This parameter specifies whether the RRC redirection algorithm is valid for the specified traffic type. The algorithm is valid only when the DR_RRC_DR D_SWITCH is enabled and when this parameter is set to ONLY_TO_IN TER_FREQU ENCY or ONLY_TO_IN TER_RAT. Value OFF indicates that RRC redirection is not allowed. ADD Value UCELLREDIRECTI ONLY_TO_IN ON(Optional) TER_FREQU SET ENCY UREDIRECTION(O indicates that WRFDptional) only the RRC 020120
BSC6900
This parameter specifies the target downlink ADD UARFCN of a UCELLDRD(Option cell for RRC WRFDal) redirection. 020400
BSC6900
SET UDRD(Optional)
This parameter specifies the target downlink UARFCN of a cell for RRC WRFDredirection. 02040003
BSC6900
This parameter specifies the target DL UARFCN for the RRC redirection. Different values of RedirBandInd correspond to different ADD value ranges UCELLREDIRECTI of the WRFDON(Optional) UARFCN. 020120
BSC6900
BSC6900
This parameter specifies the target DL UARFCN for the RRC redirection. Different values of RedirBandInd correspond to different SET value ranges UREDIRECTION(O of the ptional) UARFCN. This parameter specifies the target uplink UARFCN of a cell for RRC redirection. Depending on the band indication, the value range as shown below: Band1: Common frequencies: [9612-9888] Special frequencies: none Band2: Common frequencies: [9262-9538] Special frequencies: {12, 37, 62, 87, 112, 137, 162, 187, 212, 237, 262, 287} Band3: ADD Common UCELLDRD(Option frequencies: al) [937-1288]
WRFD020120
WRFD020120
BSC6900
SET UDRD(Optional)
This parameter specifies the target uplink UARFCN of a cell for RRC redirection. Depending on the band indication, the value range as shown below: Band1: Common frequencies: [9612-9888] Special frequencies: none Band2: Common frequencies: [9262-9538] Special frequencies: {12, 37, 62, 87, 112, 137, 162, 187, 212, 237, 262, 287} Band3: Common frequencies: WRFD[937-1288] 02040003
BSC6900
This parameter specifies the target UL UARFCN for the RRC redirection. The value range of the UL UARFCN depends on the RedirBandInd . The relation between the RedirBandInd and the value range of the UL UARFCN is as follows: BAND1 Common UARFCNs: [9612-9888] Special UARFCNs: None BAND2 Common UARFCNs: [9262-9538] Special ADD UARFCNs: UCELLREDIRECTI {12, 37, 62, WRFDON(Optional) 87, 112, 137, 020120
BSC6900
This parameter specifies the target UL UARFCN for the RRC redirection. The value range of the UL UARFCN depends on the RedirBandInd . The relation between the RedirBandInd and the value range of the UL UARFCN is as follows: BAND1 Common UARFCNs: [9612 - 9888] Special UARFCNs: none BAND2 Common UARFCNs: [9262 - 9538] Special SET UARFCNs: UREDIRECTION(O {12, 37, 62, WRFDptional) 87, 112, 137, 020120
BSC6900
This parameter specifies whether the UL frequency of the target cell of redirection needs to be configured. - TRUE: The UL frequency needs to be configured. - FALSE: The UL frequency does not need to be configured. It is configured automatically according to the relationship ADD between UL UCELLDRD(Option and DL WRFDal) frequencies. 02040003
BSC6900
SET UDRD(Optional)
This parameter specifies whether the UL frequency of the target cell of redirection needs to be configured. - TRUE: The UL frequency needs to be configured. - FALSE: The UL frequency does not need to be configured. It is configured automatically according to the relationship between UL and DL WRFDfrequencies. 02040003
BSC6900
This parameter specifies whether the target UL UARFCN to which the UE is redirected should be configured. Value TRUE indicates that the UL UARFCN needs to be configured. Value FALSE indicates that the UL UARFCN need not be manually configured and it is automatically configured according to the relation ADD between the UCELLREDIRECTI UL and DL WRFDON(Optional) UARFCNs. 020120
BSC6900
This parameter specifies whether the target UL UARFCN to which the UE is redirected should be configured. Value TRUE indicates that the UL UARFCN needs to be configured. Value FALSE indicates that the UL UARFCN does not need to be manually configured and it is automatically configured according to the relation SET between the UREDIRECTION(O UL and DL WRFDptional) UARFCNs. 020120 Port for output LINE1(The actual value range may differ on the SET CLK(Optional) LMT ) Back-up port for output LINE(The actual value range may differ on the SET CLK(Optional) LMT ) Switch of panel SET CLK(Optional) BITS1(2M)
BSC6900
MRFD210502
BSC6900
MRFD210502 MRFD210502
MRFD210502
BSC6900
Whether to use SGSN clock source.Only the Gb interface board needs to set this parameter. If the SGSN clock and the MSC clock have different clock sources, the MSC clock must use the clock source of the SGSN clock. If the two clocks use the same clock source, this parameter does not need to be MRFDSET CLK(Optional) set. 210502 Indicates whether register beared by fach under call shock control. This function only applies under NodeB level SET or cell level UCALLSHOCKCTR call shock WRFDL(Optional) control. 040100
BSC6900
This parameter specifies rehost policy type for NodeB. The value "REHOSTRI GHTNOW" indicates to perform rehost policy for the NodeB immediately when the RNC recovers from disaster. The value "REHOSTDE LAY" indicates to perform rehost policy for the NodeB after a specified delayed period when the RNC recovers from disaster. The SET value UPOOLPRIMHOST "REHOSTWH WRFDPOLICY(Optional) EN" indicates 040202 This timer is started when an AAL2 signaling entity sends the peer node an indication SET for releasing AAL2TMR(Optional an AAL2 WRFD) connection. 05030104 A timer to RNC wait for another relocation SET request in USTATETIMER(Op relocation WRFDtional) procedure. 010101
RELINDTMR
BSC6900
BSC6900
A timer to RNC wait for the relocation command SET message in USTATETIMER(Op relocation WRFDtional) procedure. 010101 A timer to RNC wait for rnsap relocation commit SET message in USTATETIMER(Op relocation WRFDtional) procedure. 010101 A timer used for data SET forwarding in USTATETIMER(Op relocation WRFDtional) procedure. 010101 A timer to DRNC wait for Iu release command in SET the failed USTATETIMER(Op relocation WRFDtional) procedure. 010101 A timer to RNC wait for the Iu release command SET message in USTATETIMER(Op relocation WRFDtional) procedure. 010101 A timer to RNC wait for mobile information SET confirmation USTATETIMER(Op in relocation WRFDtional) procedure. 010101 A timer to RNC wait for the response to physical channel SET reconfiguratio USTATETIMER(Op n in relocation WRFDtional) procedure. 010101
BSC6900
BSC6900
BSC6900
BSC6900
BSC6900
A timer to RNC wait for inter-RAT handover SET completion in USTATETIMER(Op relocation WRFDtional) procedure. 010101 This timer is started when an AAL2 signaling entity sends the peer node a request for SET releasing an AAL2TMR(Optional AAL2 ) connection. This parameter specifies the threshold of immediate rate reduction after the soft handover failure. The rate reduction of the active set and the SHO retry procedure can be triggered without the intrafrequency reporting event reported, when the quality of the cell in the active set fulfills the following conditions. The formula of direct SHO rate reduction SET is UINTRAFREQHO( new > Optional) Mbest_cell -
BSC6900
WRFD05030104
BSC6900
WRFD020202 WRFD020203
REMARK
Remark
BSC6900
None
REMARK
BSC6900
Purpose description of ADD the ATM ATMTRF(Optional) traffic record None Purpose description of the route record None
REMARK
BSC6900
ADD IPRT(Mandatory)
RepeatNum
Repeat Number
BSC6900
Repeat SET Number of URNCCBPARA(Opt send Writeional) Replace. Repeat SET Period of URNCCBPARA(Opt send Writeional) Replace.
WRFD011000
BSC6900
WRFD011000
BSC6900
This parameter specifies the reporting period of event 1A. That is, event 1A is reported at each reporting interval. Usually, event 1A is reported only once. Nevertheless, if the cell, where event 1A is reported, does not join the active set in a specified period of time, the UE can change the reporting of event 1A into periodical mode.to SET avoid missing UINTRAFREQHO( of Optional) measurement ADD reports. The UCELLINTRAFRE event 1A of QHO(Optional) this cell is
WRFD020202 WRFD020203
BSC6900
This parameter specifies the number of reporting times of event 1C for periodical reporting. That is, event 1C is reported at each reporting interval. Usually, event 1C is reported only once. Nevertheless, if the cell, where event 1C is reported, does not join the active set in a specified period of time, the UE SET can change UINTRAFREQHO( the reporting Optional) of event 1C ADD into periodical UCELLINTRAFRE mode.to QHO(Optional) avoid missing
WRFD020202 WRFD020203
BSC6900
This parameter specifies the number of reporting times of event 1J for periodical reporting. That is, event 1J is reported at each reporting interval. Usually, event 1J is reported only once. Nevertheless, if the cell, where event 1J is reported, does not join the EDCH active set in a specified period of time, the UE can change SET the reporting UINTRAFREQHO( of event 1J Optional) into periodical ADD mode.to UCELLINTRAFRE avoid missing QHO(Optional) of
WRFD020202 WRFD020203
Req2GCap
Required 2G Capability
BSC6900
This parameter specifies the minimum capability of the 2G cell required by inter-RAT handovers from 3G networks to 2G networks. If the capability of the 2G cell does not meet the requirement, the handover will not be performed. In terms of the ability to support PS services, EDGE cells rank first, GPRS cells ADD second, and UTYPRABBASIC(M GSM cells andatory) third.
BSC6900
CPU usage threshold for resource auditing control. When the average CPU usage of sliding windows reaches or exceeds the threshold, resource SET auditing FCCPUTHD(Option control is WRFDal) triggered. 040100
BSC6900
Packet queue usage threshold for resource auditing control. When the average packet queue usage of sliding windows reaches or exceeds the threshold, resource SET auditing FCMSGQTHD(Opti control is WRFDonal) triggered. 040100 CPU usage threshold for recovery from resource auditing control. When the average CPU usage of sliding windows is lower than the threshold, resource SET auditing FCCPUTHD(Option control is WRFDal) stopped. 040100
BSC6900
BSC6900
Packet queue usage threshold for recovery from resource auditing control. When the average packet queue usage of sliding windows is lower than the threshold, resource SET auditing FCMSGQTHD(Opti control is WRFDonal) stopped. 040100 Whether to control the resource auditing flow
RESAUDITS W
SET FCSW(Optional)
WRFD040100
BSC6900
CORRM Algo reserved switch 0. The switch is reserved for SET further UCORRMALGOSW change ITCH(Optional) request use. None
BSC6900
CORRM Algo reserved switch 1. The switch is reserved for SET further UCORRMALGOSW change ITCH(Optional) request use. None CORRM Algo reserved U32 para 0. The para of 32 bits is reserved for SET further UCORRMALGOSW change ITCH(Optional) request use. None
CORRM Algo reserved U32 para 1. The para of 32 bits is reserved for SET further UCORRMALGOSW change ITCH(Optional) request use. None CORRM Algo reserved U8 para 0. The para of 8 bits is reserved SET for further UCORRMALGOSW change ITCH(Optional) request use. None CORRM Algo reserved U8 para 1. The para of 8 bits is reserved SET for further UCORRMALGOSW change ITCH(Optional) request use. None Interval for resetting the SET counter when PWDPOLICY(Optio the user fails MRFDnal) to log in 210305 This timer is started when an AAL2 signaling entity sends the peer node SET a request for AAL2TMR(Optional resetting an WRFD) AAL2 path. 05030104 DLD LICENSE(Optional) ULD LICENSE(Optional) Whether to resume broken download
BSC6900
REST
BSC6900
MRFD210403
BSC6900
ADD PPPLNK(Optional)
None
BSC6900
None
BSC6900
RESTYPE
MRFD210304
This parameter specifies the filter coefficient for RLC retransmissio n ratio measurement . The filter coefficient is mainly used to smooth the original measurement result. Smaller filter coefficient means that original measurement result is less smoothed, and 0 means that original measurement result is not smoothed at all. Note: this parameter is only used in rate adjust ADD algorithm UTYPRABRLC(Opti based on WRFDonal) TCP, and is 040100
BSC6900
SET UFRC(Optional)
Each bit indicates whether to retry the correspondin g HSPA technology. If a bit is set the 1, then the RNC retries the correspondin g HSPA technology if the UE is not using the correspondin g HSPA technology. Otherwise, no retry is performed.
RFT
Execute Interval
BSC6900
Interval for executing the scheduled subtask The unit is determined according to the time mode. 1. If the time mode is set to "DAILY_T" or "DAILY_C", the unit is day. 2. If the time mode is set to "WEEKLY_T" or "WEEKLY_C" , the unit is week. 3. If the time mode is set to "MONTHLY_ T" or "MONTHLY_ ADD C", the unit is SUBTSK(Optional) month. None
RlcMode
BSC6900
This parameter specifies the work mode of RLC entity. - AM: Acknowledge d Mode. Automatic Repeat Request (ARQ) is used in error correction. - UM: Unacknowled ged Mode. Retransmissi on is not applied. According to the configuration, the data with errors is discarded or marked. - TM: Transparent Mode. No protocol overhead is ADD added to the UTYPRABRLC(Ma higher-layer ndatory) data. The
RLCN
Channel No.
BSC6900
The loopback channel number when the port loopback mode is set to SET TDM remote E1T1LOP(Optional) loopback None
RLCSize
RLC size[bit]
BSC6900
This parameter defines the RLC size correspondin g to each transport format. For a common channel, the RLC size reflects the ADD actual UFACHDYNTFS(M transport andatory) block size. ADD For detailed UPCHDYNTFS(Ma information of ndatory) this ADD parameter, URACHDYNTFS(M refer to 3GPP WRFDandatory) TS 25.322. 021000
RlMaxDlPwr
RL Max DL TX power
BSC6900
This parameter should fulfill the coverage requirement of the network planning, and the value is relative to [PCPICH transmit power]. If the parameter is excessively high, downlink interference may occur. If the parameter is excessively low, the downlink power control may be affected. For detailed information of this ADD parameter, UCELLRLPWR(Ma refer to 3GPP ndatory) TS 25.433.
WRFD020101 WRFD020501
RlMinDlPwr
RL Min DL TX power
BSC6900
This parameter should consider the maximum downlink transmit power and the dynamic range of power control, and the value is relative to [PCPICH transmit power]. Since the dynamic range of power control is set to 15 dB, this parameter is recommende d as [RL Max DL TX power] - 15 dB. If the parameter value is excessively low, the transmit power may ADD become UCELLRLPWR(Ma excessively ndatory) low because
WRFD020101 WRFD020501
BSC6900
A timer to RNC wait for the response to radio link reconfiguratio SET n prepare in USTATETIMER(Op the radio link WRFDtional) procedure. 010101 A timer to RNC wait for the response to radio link deletion SET request in the USTATETIMER(Op radio link WRFDtional) procedure. 010101
BSC6900
RlRstrTmr
RL restoration timer[ms]
BSC6900
A timer to RNC wait for radio link restoration SET indication in USTATETIMER(Op the radio link WRFDtional) procedure. 010101 A timer to RNC wait for the response to radio link setup request SET in the radio USTATETIMER(Op link WRFDtional) procedure. 010101 ID of the RNC where a GPS receiver is MRFDinstalled 210502
RNCID
RNC ID
BSC6900
ADD GPS(Mandatory)
RncId
RNC ID
BSC6900
ADD Uniquely URNCBASIC(Mand identifies an atory) RNC. ADD USMLCCELL(Mand atory) ADD UINTRAFREQNCE LL(Mandatory) ADD UINTERFREQNCE LL(Mandatory) ADD UCELLINTRAFRE QHO(Mandatory) ADD U2GNCELL(Mandat ory) ADD UCBSADDR(Mand atory)
WRFD010101
RNCId
RNC ID
BSC6900
BSC6900
BSC6900
WRFD040202
BSC6900
ADD URNCPOOL(Mand RNC Pool atory) name. Protocol version supported by the ADD neighboring UNRNC(Mandatory) RNC. SET Name of the CERTFILE(Optional root ) certificate file Speed ADD reduction IPLOGICPORT(Opt alarm report ional) threshold
WRFD040202
BSC6900
WRFD010101 MRFD210305
RootCert
Root Certificate File Name BSC6900 Decrease rate alarm report threshold
RPTTHD
BSC6900
None
RrcCause
BSC6900
This parameter specifies the cause of RRC connection establishment , that is, the value of the Establishmen t cause IE in the RRC SET CONNECTIO URRCESTCAUSE( N REQUEST WRFDMandatory) message. 010510
The minimum of RrcConnEsta Rrc connection bAttMinNum request Per CPUS. BSC6900
The minimum number of RRC connection request per CPUS to report KPI alarm. In a checking period,if the number of RRC connection request is higher than the threshold and the RRC connnection setup successful ratio is lower than the related threshold,the KPI alarm of RRC SET connection UKPIALMTHD(Opti setup ratio is WRFDonal) reported. 010510
Threshold of RRC connection setup successful ratio per CPUS to report KPI alarm. In a checking period,if the ratio is lower than this threshold and the number of RRC connection request is higher than the related threshold,the KPI alarm of RRC SET connection UKPIALMTHD(Opti setup ratio is WRFDonal) reported. 010510 Wait time in RRC connection reject message, the time period the UE has to wait before repeating the rejected SET procedure of USTATETIMER(Op RRC WRFDtional) connection 010101 A timer used SET to wait for USTATETIMER(Op initial direct WRFDtional) transmission. 010101
BSC6900
RrcInitDtTmr
BSC6900
A timer used to wait for the Iu release command message responding to SET Iu release USTATETIMER(Op request WRFDtional) message. 010101 A timer used to wait for the respons SET e to paging USTATETIMER(Op type 1 in RRC WRFDtional) procedure. 010101 A timer used to retransmit the RRC CONNECTIO SET N RELEASE USTATETIMER(Op message to WRFDtional) UE. 010101 A timer used to wait for the acknowledge ment of radio link control (RLC) SET completion in USTATETIMER(Op RRC WRFDtional) procedure. 010101 A timer to RNC wait for the response to security mode command SET from UE in USTATETIMER(Op security mode WRFDtional) procedure. 010101
BSC6900
BSC6900
BSC6900
A timer used to wait for RRC connection setup complete message SET from UE in USTATETIMER(Op RRC WRFDtional) procedure. 010101 Whether to add the AAL2 ADD path to the AAL2PATH(Mandat resource WRFDory) group 050301 ADD AAL2PATH(Mandat ory) Resource ADD group number WRFDIPPATH(Mandatory) of the PATH 050301 The parameter indicates whether the resource group is shared or is used by a ADD specific RSCGRP(Mandator telecom y) carrier.
RSCGRPN
Rscgrp No.
BSC6900
WRFD050406
Resource WRFDADD management 040100 ATMLOGICPORT( mode of WRFDOptional) logical port 02130406
Resource management mode. The logical port working in the SHARE mode can be shared by multiple carriers. The logical port working in the EXCLUSIVE ADD mode can be IPLOGICPORT(Opt used by only ional) one carrier.
WRFD050408 WRFD02130406
Indicating the resource ADD management WRFDUNODEB(Optional) mode. 02130406 Reason for locking the configuration LCK and CMCTRL(Mandator management MRFDy) control rights 210301
RSNDES
Lock Reason
BSC6900
RSPTMR
Timer_NoResponse
BSC6900
ADD No response WRFDSAALLNK(Optional) timer 050301 This is the description file for resetting the board. The reset file names of UPD different JTGCPLD(Mandato boards are ry) different.
BSC6900
MRFD210401
RSTF
BSC6900
Name of the result file generated after the command is executed. If this parameter is not specified, the name of the result file is automatically generated in the format of BATCH_RST _YYYYMMDD HHNNSSmm m. The result file is located in the ftp directory in the main area of the OMU, and you should not add the path when entering the name. The flag of the main area can be RUN queried BATCHFILE(Option through the al) "LST None
RSTFUN
Restart switch
BSC6900
WRFD050301
The times of resending the reset message to CN after the response is not received SET upon the UIUTIMERANDNU expiry of the WRFDM(Optional) timer. 010101 This parameter is SET saved for the UDPUCFGDATA(O coming ptional) usage. None
RsvdPara1
Reserved Parameter1
BSC6900
RsvdPara1
Reserved parameter 1
BSC6900
SET URRCTRLSWITCH (Optional) ADD UNRNC(Optional) ADD UCNNODE(Optiona Reserved WRFDl) parameter 1. 010101
RsvdPara1
Reserved parameter 1
BSC6900
The algorithms with the above values represent are as follow: RsvdBit1: Control RTWP Antiinterfence algorithm. RsvdBit2: Legacy hsdpa admission control algorithm in MIMO cell. RsvdBit3~Rs vdBit16:Reser ved Switch. If RsvdBit1 is selected, the correspondin g algorithms will be ADD enabled; UCELLALGOSWIT otherwise, WRFDCH(Optional) disabled. 020101
RsvdPara1
Reserved parameter 1
BSC6900
WRFD020101
RsvdPara1
Reserved parameter 1
BSC6900
WRFD020101
BSC6900
None
RsvdPara10
Reserved Parameter10
BSC6900
This parameter is SET saved for the UDPUCFGDATA(O coming ptional) usage. None
BSC6900
SET Parameter 10 TRANSPATCHPAR reserved for A(Optional) future use. None This parameter is SET saved for the UDPUCFGDATA(O coming ptional) usage. None This parameter is SET saved for the UDPUCFGDATA(O coming ptional) usage. None
RsvdPara11
Reserved Parameter11
BSC6900
RsvdPara12
Reserved Parameter12
BSC6900
RsvdPara13
Reserved Parameter13
BSC6900
This parameter is SET saved for the UDPUCFGDATA(O coming ptional) usage. None This parameter is SET saved for the UDPUCFGDATA(O coming ptional) usage. None This parameter is SET saved for the UDPUCFGDATA(O coming ptional) usage. None This parameter is SET saved for the UDPUCFGDATA(O coming ptional) usage. None This parameter is SET saved for the UDPUCFGDATA(O coming WRFDptional) usage. 020123 ADD UNRNC(Optional) ADD UCNNODE(Optiona l) ADD UCELLALGOSWIT CH(Optional) ADD UNODEBALGOPA RA(Optional) SET UCACALGOSWITC H(Optional)
RsvdPara14
Reserved Parameter14
BSC6900
RsvdPara15
Reserved Parameter15
BSC6900
RsvdPara16
Reserved Parameter16
BSC6900
RsvdPara2
Reserved Parameter2
BSC6900
RsvdPara2
BSC6900
RsvdPara2
BSC6900
RsvdPara2
BSC6900
RsvdPara2
BSC6900
BSC6900
None
RsvdPara3
BSC6900
RsvdPara3
BSC6900
RsvdPara3
BSC6900
RsvdPara3
BSC6900
This parameter is SET saved for the UDPUCFGDATA(O coming ptional) usage. None ADD UCELLALGOSWIT Reserved WRFDCH(Optional) parameter 3 020101 ADD UNODEBALGOPA Reserved WRFDRA(Optional) parameter 3. 020101 SET UCACALGOSWITC Reserved WRFDH(Optional) parameter 3. 020101
BSC6900
None
RsvdPara4
Reserved Parameter4
BSC6900
This parameter is SET saved for the UDPUCFGDATA(O coming ptional) usage. None
BSC6900
None
RsvdPara5
Reserved Parameter5
BSC6900
This parameter is SET saved for the UDPUCFGDATA(O coming ptional) usage. None
BSC6900
None
RsvdPara6
Reserved Parameter6
BSC6900
This parameter is SET saved for the UDPUCFGDATA(O coming ptional) usage. None
BSC6900
None
RsvdPara7
Reserved Parameter7
BSC6900
This parameter is SET saved for the UDPUCFGDATA(O coming ptional) usage. None
BSC6900
None
RsvdPara8
Reserved Parameter8
BSC6900
This parameter is SET saved for the UDPUCFGDATA(O coming ptional) usage. None
BSC6900
None
RsvdPara9
Reserved Parameter9
BSC6900
This parameter is SET saved for the UDPUCFGDATA(O coming ptional) usage. None
BSC6900
None
RT
Revertive type
BSC6900
BSC6900
Recovery mode of the MSP protection SET MSP(Optional) group None Routing context. The routing context identifies a specified route. If the routing context is to be configured, its ADD value must be M3LE(Optional) negotiated ADD between the WRFDM3DE(Optional) two ends. 050409 Proportion of the RTCP bandwidth in the Iu CS bandwidth. For example, when the value is 1, it indicates that the allocated RTCP path bandwidth is ADD 1% of the UCNNODE(Optiona RTP path WRFDl) bandwidth. 050409
BSC6900
Timer for state transition from CPC to E_FACH of real-time services, used to check whether the UE in the CELL_DCH(w ith CPC) state with real-time SET services is in UUESTATETRANS the stable low TIMER(Optional) activity state.
BSC6900
Timer for state transition from CPC to FACH of realtime services, used to check whether the UE in the CELL_DCH(w ith CPC) state with real-time SET services is in UUESTATETRANS the stable low TIMER(Optional) activity state.
WRFD010686 WRFD010687
RTCPSwitch
RTCP SWITCH
BSC6900
RTDEST
This parameter is valid only when CNDomainId is set to "CS_DOMAI N" and TnlBearerTyp e is set to "IP_TRANS". When this parameter is set to "ON", the performance data such as the number of lost packets, rate of lost packets, round trip time (RTT), delay jitter on each IP path are calculated according to the RTCP message. The information is then analyzed ADD for evaluating UCNNODE(Optiona the network l) operating ADD OMUIPRT(Mandato Destination IP ry) address ADD OMUIPRT(Mandato ry) Routing mask
WRFD050409 WRFD211502
None
None
BSC6900
Timer for state transition from DCH or HSPA to E_FACH of real-time services, used to check whether the UE in the CELL_DCH state with realtime services SET is in the UUESTATETRANS stable low WRFDTIMER(Optional) activity state. 010688
BSC6900
Timer for state transition from DCH or HSPA to FACH of realtime services, used to check whether the UE in the CELL_DCH state with realtime services SET is in the UUESTATETRANS stable low WRFDTIMER(Optional) activity state. 010202
BSC6900
Pending time after the traffic volume event 4B for state transition from DCH or HSPA to FACH transition is reported. This parameter is used to prevent too many traffic volume SET events 4B UUESTATETRANS being WRFD(Optional) reported. 010202
BSC6900
This parameter is used to check whether the UE in the low activity state. If the UE is on DCH or HSPA channel, the low activity counter increases by 1 every time SET traffic volume UUESTATETRANS event 4B is WRFD(Optional) reported. 010202
BSC6900
When the traffic volume is below the 4B threshold and remains so for the period specified by this parameter, the event 4B is reported. This parameter prevents unnecessary traffic volume events that are caused by traffic volume SET instability UUESTATETRANS from being WRFD(Optional) triggered. 010202 This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of real-time services from E_FACH to SET HSPA with UUESTATETRANS CPC (Optional) technology.
This parameter specifies the occurrence time of 4A event for triggering the transition of real-time services from E_FACH to HSPA with CPC technology. This parameter prevents unnecessary reports that are caused by traffic volume SET instability UUESTATETRANS from being (Optional) triggered.
This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of real-time services from SET E_FACH to UUESTATETRANS DCH or WRFD(Optional) HSPA. 010688
BSC6900
This parameter specifies the occurrence time of 4A event for triggering the transition of real-time services from E_FACH to DCH or HSPA. This parameter prevents unnecessary reports that are caused by traffic volume SET instability UUESTATETRANS from being WRFD(Optional) triggered. 010688 This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of real-time services from FACH to SET HSPA with UUESTATETRANS CPC (Optional) technology.
WRFD010686 WRFD010687
BSC6900
BSC6900
This parameter specifies the occurrence time of 4A event for triggering the transition of real-time services from FACH to HSPA with CPC technology. This parameter prevents unnecessary reports that are caused by traffic volume SET instability UUESTATETRANS from being (Optional) triggered. This parameter specifies the threshold of the traffic volume of 4A event for triggering the transition of real-time services from SET FACH to UUESTATETRANS DCH or (Optional) HSPA.
WRFD010686 WRFD010687
WRFD010202
BSC6900
This parameter specifies the occurrence time of 4A event for triggering the transition of real-time services from FACH to DCH or HSPA. This parameter prevents unnecessary reports that are caused by traffic volume SET instability UUESTATETRANS from being WRFD(Optional) triggered. 010202
RTOALPHA
BSC6900
It is used to calculate the round-trip time of the protocol stack and the RTO value. The value must be smaller than "RTOBETA". In the case of the fixed value of the "RTOBETA", the larger the value is, the ADD less the link SCTPLNK(Optional delay WRFD) sensitivity is. 050402
RTOBETA
BSC6900
It is used to calculate the round-trip time of the protocol stack and the RTO value. The value must be greater than "RTOALPHA" . In the case of the fixed value of the "RTOALPHA" , the larger the value is, ADD the less the SCTPLNK(Optional link delay WRFD) sensitivity is. 050402 When the "RTOMIN" and "RTPMAX" parameters are set to fixed values, the larger the value is, the ADD longer the SCTPLNK(Optional check of the WRFD) link is. 050402 When the "RTOMIN" parameter is set to a fixed value, the larger the value is, the ADD longer the SCTPLNK(Optional check of the WRFD) link is. 050402
RTOINIT
BSC6900
RTOMAX
BSC6900
RTOMIN
BSC6900
When the "RTOMAX" parameter is set to a fixed value, the larger the value is, the ADD longer the SCTPLNK(Optional check of the WRFD) link is. 050402
RTX
Route index
BSC6900
ADD AAL2RT(Optional)
RUS
Logical port speed increase step. When detecting the available bandwidth increase through IPPM, the system increases the bandwidth of the logical ADD port by using IPLOGICPORT(Opt this ional) parameter. None
RUSPRD
Bandwidth increase step adjustment period. This parameter indicates the period to increase the bandwidth of the logical port. Note that the actual bandwidth increase step adjustment period is the packet drop ratio Statistics period multiplied by ADD this IPLOGICPORT(Opt parameter ional) value. None WRFD050402 WRFDReceive 050403 ADD bandwidth of WRFDIPPATH(Mandatory) IP path 050404
RXBW
Backward Bandwidth
BSC6900
RxBw
Backward Bandwidth
BSC6900
WRFD050406
RXBW
BSC6900
RXTRFX
BSC6900
WRFD050301 WRFD05030105
RXTRFX
BSC6900
RX traffic record index of the AAL2 Path on the out BSC6900 port (ATM layer PVC traffic). The traffic index is configured in the ATM ADD traffic table AAL2PATH(Mandat (see "LST ory) ATMTRF").
RXTRFX
BSC6900
RXTRFX
BSC6900
Receiving ADD traffic index of VPCLCX(Mandator the low end WRFDy) VPL/VCL 050301
BSC6900
When the time difference between the time when the UE receives a physical frame from the downlink and the time when the UE transmits the physical frame to the uplink becomes greater than a certain threshold, the event 6F will be triggered. This parameter is to optimize the power control performance within a time slot, that is, to guarantee that the power control SET within a time UHOCOMM(Option slot is al) implemented
WRFD020202 WRFD020203
BSC6900
When the time difference between the time when the UE receives a physical frame from the downlink and the time when the UE transmits the physical frame to the uplink becomes smaller than a certain threshold, the event 6G will be triggered. This parameter is to optimize the power control performance within a time slot, that is, to guarantee that the power control SET within a time UHOCOMM(Option slot is al) implemented
WRFD020202 WRFD020203
S1VALUE
S1 Value
BSC6900
S1 sending value. It is a synchronizati on status byte used by the local end to examine the quality of the received clock signals before the local end switches to a clock source with higher quality. The smaller the value of S1 is, the lower the clock quality SET OPT(Optional) is. None ADD MTP3LNK(Mandato ry) ADD SAALLNK(Mandato ry) ADD ADJNODE(Mandat ory) LOP VCL(Mandatory) SET VCLLOP(Optional) ADD UCCP(Mandatory) ADD UNCP(Mandatory)
SAALLNKN
BSC6900
SAAL link number of the XPU board. This number identifies an SAAL link uniquely.
WRFD050301 WRFD050404
SAALLNKT
Interface type
BSC6900
Interface type of the SAAL link. The interface type of the Iub interface is UNI. The interface type ADD of the Iu and SAALLNK(Mandato Iur interface WRFDry) link is NNI. 050301
SAALTMR
BSC6900
This timer is a protection timer waiting for an SAAL response after a link SET setup request MTP3TMR(Optional is sent to the WRFD) SAAL. 050301 MCC,MNC,L AC and SAC together compose the Service Area ID (SAI). SAI = MCC || MNC || LAC || SAC. The SAI is used to define an area composed of one or more cells in the same location area. This area is called service area, which indicates the location of a UE to the CN. ADD This UCZ(Mandatory) parameter is ADD defined by the UCELLSETUP(Man operator. For datory) detailed ADD information of UCELLQUICKSET this UP(Mandatory) parameter, ADD refer to 3GPP USAC(Mandatory) TS 23.003. None Indicating whether the Iub interface supports ADD satellite WRFDUNODEB(Optional) transmission. 050104
SAC
BSC6900
BSC6900
BSC6900
Sequential offset between the SCCPCH and PCCPCH in the cell. As defined by the 25.211 protocol, the PICH timing is 7680 chips prior to its correspondin g SCCPCH frame timing. If the offset of the SCCPCH timing from the PCCPCH timing is smaller than 30 (x 256 chips), the correspondin g CFN decreases by 1. Then, the difference between the PICH CFN and the correspondin g SCCPCH CFN is 2. WRFDHowever, in 010101
SCMD
Command String
BSC6900
Command string of the scheduled subtask. This command can be only a service command, and the ADD system SUBTSK(Mandator command y) cannot be ADD added to the SUBCMD(Mandator scheduled y) subtask. None
SCR
ScrambCode
Scrambling code
BSC6900
WRFD050305 WRFDAverage rate 05030107 ADD of the ATM WRFDATMTRF(Optional) traffic 050301 Scrambling code of the SCCPCH. 0: primary scrambling code; 1~15: secondary scrambling code. Note: This parameter must be set to the primary scrambling code for the SCCPCH bearing the PCH. It can be set to the primary scrambling code or secondary scrambling code for the SCCPCH that does not carry the PCH. For detailed information of this ADD parameter, USCCPCHBASIC( refer to 3GPP WRFDMandatory) TS 25.433. 010101
BSC6900
SET E1T1(Optional)
Scramble switch
WRFD05030101
BSC6900
None
SCSN
BSC6900
EXP ALMLOG(Optional) Start serial STA number of the MRFDALMLOG(Optional) alarm record 210304 ADD SCTPLNK(Mandato ry) ADD M3LNK(Mandatory) ADD UCCP(Mandatory) ADD UNCP(Mandatory)
SCTPLNKN
BSC6900
SCTP link number of XPU board. This number identifies an SCTP link uniquely.
WRFD050402 WRFD050404
SD
Start Date
BSC6900
ADD Date when SUBTSK(Mandator the scheduled MRFDy) task is started 210305 Start date of the alarm record. By default, the EXP start date is ALMLOG(Optional) 2000-01-01. Start date of the alarm record. By default, the STA start date is ALMLOG(Optional) 2000-01-01.
SD
Start Date
BSC6900
MRFD210304
SD
Start Date
BSC6900
MRFD210304
SD
BSC6900
Maximum number of SET days for ALMCAPACITY(Op storing history MRFDtional) alarms 210304
SDALMTHD
SD Alarm Threshold
BSC6900
None
SDAY
Start date
BSC6900
MRFD210301
SDENABLE
SD Enable
BSC6900
None
SDSFPRI
SDSF Priority
BSC6900
Specifies the SF and SD SET MSP(Optional) event priority None Seed of the pseudorandom sequence generator. It can prevent idle period of different NodeBs from WRFDoverlapping. 020802
Seed
ADD UIPDL(Mandatory)
SelectType
Detect type
BSC6900
Whether to detect all NodeBs STR configured or UNODEBDETECT( a single Optional) NodeB. None This parameter indicates whether the MBMS service is released first or user first ADD when the UCELLOLC(Option overload WRFDal) occurs. 020107
BSC6900
Number of the command listening port of the server. You should not use any port number SET occupied by FTPSSRV(Mandato other ry) applications. None Number of the data port of the server in active mode. You should not use any port number SET occupied by FTPSSRV(Mandato other ry) applications. None IP address of the FTP server to be visited by the FTP client None This parameter specifies the rate of the MBMS service carried on the common channel. For details of this parameter, refer to the 3GPP TS WRFD25.346. 010616
ServerIP
BSC6900
BSC6900
ADD FTPSCLTDPORT( Mandatory) ADD UCELLMBMSFACH (Mandatory) ADD UCELLMBMSSCCP CH(Mandatory) SET UMBMSFACH(Man datory) SET UMBMSSCCPCH( Mandatory) SET UMTCH(Mandatory )
BSC6900
This parameter specifies whether the service differential DRD algorithm will be applied. - ON: The service differential DRD algorithm will be applied. - OFF: The service differential DRD ADD algorithm will UCELLDRD(Option not be WRFDal) applied. 020120
BSC6900
SET UDRD(Optional)
This parameter specifies whether the service differential DRD algorithm will be applied. - ON: The service differential DRD algorithm will be applied.(If cell-level DRD parameters are configured, the status of cell level Service differential DRD switch should also be considered.) - OFF: The service differential DRD algorithm will not be WRFDapplied. 020120
ServiceId
Service ID
BSC6900
This parameter SET define MBMS UMBMSPERF(Man service ID in WRFDdatory) PLMN ID . 010616 Indicates whether to support CS, ADD PS or both UNRNC(Mandatory) domains.
ServiceInd
CN domain indication
BSC6900
WRFD010101
BSC6900
ServiceType
Service Type
BSC6900
SGSNFLG
SGSN FLAG
BSC6900
Name of the command EXP LOG(Optional) function ADD UCELLMBMSFACH This (Mandatory) parameter ADD specifies the UCELLMBMSSCCP traffic class of CH(Mandatory) the MBMS SET service UMBMSFACH(Man carried on the datory) common SET channel. For UMBMSSCCPCH( details of this Mandatory) parameter, SET refer to the UMTCH(Mandatory 3GPP TS ) 25.346. Product SET application LICENSE(Optional) mode This parameter is valid when the node type is set to IUPS. If the parameter is set to No, it indicates the GGSN. The ADD dpx needs ADJNODE(Mandat not to be ory) configured.
MRFD210305
WRFD010616 MRFD210403
WRFD020111
BSC6900
Numbers of incoming calls to be shared when the load exceeds the forwarding threshold. When the CPU usage is between the sharing out threshold and overload threshold, and number of incoming calls in each second reaches the threshold, new arrival call attempts SET will be shared UCTRLPLNSHARE out to other MRFDPARA(Optional) UMTS CPUS. 210104
SharingType
BSC6900
This parameter specifies the sharing type of a NodeB. The value "DEDICATED " indicates that all cells of the NodeB belong to one operator. The value "RANSHARIN G" indicates that cells of the NodeB can belong to different operators, but a cell only belongs to one operator. The value "MOCN"indic ates that every cell of the NodeB ADD can belong to UNODEB(Mandator multiWRFDy) operators. 02130406
SHCSRat
BSC6900
Inter-system HCS cell reselection start threshold. When Srxlev of the serving cell is less than this parameter, the UE starts the intersystem measurement so that better cells can be selected. For ADD details, refer UCELLHCS(Option to 3GPP TS al) 25.304.
SHInd
BSC6900
SHLDFLG
Shield Flag
BSC6900
This parameter specifies the service handover attribute. If the HO_INTER_ RAT_RNC_S ERVICE_HO _SWITCH is set to ON, the service handover setting of this parameter is applied. Otherwise, the service handover setting assigned by the CN is applied. HO_TO_GS M_SHOULD_ BE_PERFOR M: Handover to the 2G network is performed so ADD long as 2G UTYPRABBASIC(M signals are andatory) available. SET ALMSHLD(Mandato Shield flag of ry) the alarm
BSC6900
This parameter specifies the threshold number of the soft handover failures. This parameter determines the reporting times of the events from the cell that fails to join the active set in soft handover, to trigger the rate reduction of the active set and the attempt to join the active set. The smaller the value of this parameter, the easier it is for the cell that fails to join the active set in the load SET based soft UINTRAFREQHO( handover to Optional) join the active
WRFD020202 WRFD020203
BSC6900
This parameter specifies the maximum evaluation period of the soft handover failure. When the rate reduction evaluation is performed on a cell that fails to join the active set, the evaluation timer is started. If the cell cannot fulfill the condition of rate reduction before the timer expires, the evaluation and rate reduction retry on the cell will not be performed. The larger the value of the SET parameter, UINTRAFREQHO( the greater Optional) the possibility Minimum quality threshold of SET soft USMLC(Mandatory) handover.
WRFD020202 WRFD020203
BSC6900
WRFD020801
When the RNC receives events 1A, 1C and 1D, the target cell can be added to the active set only when CPICH Ec/No of the target cell is higher than this absolute threshold. The purpose for setting this parameter is as follows: The current events of soft handovers are defined on the basis of relative thresholds and have no requirement for the absolute SET quality. If the UINTRAFREQHO( signal quality Optional) of added cells ADD is too poor, UCELLINTRAFRE the general QHO(Optional) quality of the
WRFD020202 WRFD020203
SHOTRIG
BSC6900
Indicates whether to trigger soft handover cross the Iur interface between the RNC and the neighboring RNC: 1) CS_SHO_S WITCH. Indicating whether to trigger hard handover for CS cross the Iur interface. 2) HSPA_SHO_ SWITCH. Indicating whether to trigger hard handover for HSPA cross the Iur interface. 3) NON_HSPA_ SHO_SWITC H. Indicating ADD whether to UNRNC(Mandatory) trigger hard
SIB11Ind
SIB11 Indicator
BSC6900
Flag of whether to include this neighboring relationship in the System Information Block 11 (SIB11). This parameter indicates whether the neighboring cell information is delivered in SIB11. FALSE: not to ADD include the UINTRAFREQNCE neighboring LL(Optional) information in ADD the SIB11. UINTERFREQNCE TRUE: to LL(Optional) include the ADD neighboring U2GNCELL(Option information in al) the SIB11.
WRFD010801 WRFD010802
SIB12Ind
SIB12 Indicator
BSC6900
Flag of whether to include this neighboring relationship in the System Information Block 12 (SIB12). This parameter indicates whether the neighboring cell information is delivered in SIB12. FALSE: not to ADD include the UINTRAFREQNCE neighboring LL(Optional) information in ADD the SIB12. UINTERFREQNCE TRUE: to LL(Optional) include the ADD neighboring U2GNCELL(Option information in al) the SIB12.
WRFD010801 WRFD010802
BSC6900
Determine whether some system information blocks are broadcast in this cell. If the correspondin g system information block is selected, then send this system ADD information UCELLSIBSWITCH block in this WRFD(Optional) cell. 010401
SigChType
This parameter specifies the channel type and bit rate for RRC connection establishment . - FACH: The RRC connection is set up on the common channel. DCH_3.4K_SI GNALLING: The RRC connection is set up on the 3.4 kbit/s dedicated channel. DCH_6.8K_SI GNALLING: The RRC connection is set up on the 6.8 kbit/s dedicated SET channel. URRCESTCAUSE( WRFDOptional) DCH_13.6K_ 010510 ADD MTP3RT(Mandator y) ADD MTP3LKS(Mandato ry) ADD MTP3LNK(Mandato ry) ADD M3RT(Mandatory) ADD M3LKS(Mandatory) ADD M3LNK(Mandatory)
SIGLKSX
BSC6900
SIGLKSX
BSC6900
SIGLNKID
Signaling link ID
BSC6900
ID of an M3UA link in ADD the specified M3LNK(Mandatory) link set Indicating whether the FACH bears signalling.
WRFD050409
SigRbInd
BSC6900
ADD UFACH(Optional)
WRFD020900
SIGSLC
WRFD050301
Maximum rate of the narrowband AMR speech service for WRFDsilver users. 020701
BSC6900
Maximum rate of the wideband AMR speech service for silver users.
WRFD010613 WRFD020701
BSC6900
This parameter specifies the DL MBR of SET signal for UUSERMBR(Optio DRNC HSPA WRFDnal) User. 050424 This parameter specifies the UL MBR of SET signal for UUSERMBR(Optio DRNC HSPA WRFDnal) User. 050424
BSC6900
SIPADDR
Source IP address
BSC6900
PING IP(Mandatory)
Source IP address
None
SIPADDR
Source IP address
BSC6900
TRC IPADDR(Optional)
Source IP address
None
SIPDL
BSC6900
WCDMA IMS signaling ADD service TRMFACTOR(Opti downlink WRFDonal) factor 050406
BSC6900
WRFD050406
SIPPRITH
IMS signaling primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the IMS ADD signaling WRFDLOADEQ(Optional) service. 050404
BSC6900
IMS signaling primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the IMS ADD signaling WRFDLOADEQ(Optional) service. 050404
SIPUL
WCDMA IMS ADD signaling TRMFACTOR(Opti service uplink WRFDonal) factor 050406
BSC6900
SlotFormat
Slot format
BSC6900
The UE does not start the inter-RAT measurement if it detects that the quality of the serving cell is higher than this threshold. For detailed information of this ADD parameter, UCELLHCS(Option refer to 3GPP al) TS 25.304. This parameter defines the slot format used by the SCCPCH. The configuration of this parameter is relevant to the SF, pilot bit, and TFCI of the SCCPCH. For detailed information of this ADD parameter, USCCPCHBASIC( refer to 3GPP Mandatory) TS 25.433.
WRFD021200 WRFD020110
WRFD022000
SlotFormat1
Slot format 1
BSC6900
Sequence number of available PRACH timeslot formats. For detailed information of this ADD parameter, UPRACHSLOTFOR refer to 3GPP WRFDMAT(Optional) TS 25.211. 022000
SlotFormat2
Slot format 2
BSC6900
Sequence number of available PRACH timeslot formats. For detailed information of this ADD parameter, UPRACHSLOTFOR refer to 3GPP WRFDMAT(Optional) TS 25.211. 022000 Sequence number of available PRACH timeslot formats. For detailed information of this ADD parameter, UPRACHSLOTFOR refer to 3GPP WRFDMAT(Optional) TS 25.211. 022000 Sequence number of available PRACH timeslot formats. For detailed information of this ADD parameter, UPRACHSLOTFOR refer to 3GPP WRFDMAT(Optional) TS 25.211. 022000 Number of available PRACH timeslot formats. For detailed information of this ADD parameter, UPRACHSLOTFOR refer to 3GPP WRFDMAT(Mandatory) TS 25.211. 022000
SlotFormat3
Slot format 3
BSC6900
SlotFormat4
Slot format 4
BSC6900
BSC6900
CPU usage threshold for paging flow control over supplementar y services (SS) and location service (LCS). When the average CPU usage of sliding windows reaches or exceeds the threshold, SS and LCS SET paging flow FCCPUTHD(Option control is WRFDal) triggered. 040100 CPU usage threshold for recovery from paging flow control over supplementar y services and location service. When the average CPU usage of sliding windows is lower than the threshold, SS and LCS SET paging flow FCCPUTHD(Option control is WRFDal) stopped. 040100
BSC6900
SLSMASK
BSC6900
ADD N7DPC(Optional)
Signaling route load sharing. In the value, the number of 1s (represented by n) determines the maximum number (2) of routes for the load sharing. For example, B0000 indicates that up to one route is used for the load sharing, B0001 and B1000 indicate that up to two routes are used for the load sharing. The additional routes are not used for the load sharing. The AND operation between this value and " WRFDsignaling link 050301
SM
StartType
BSC6900
Type of the start date. "WEEK" indicates that the start date is a weekday. "DATE" indicates that the start date is a month day. "DATEWEEK " indicates the start date is expressed by a combination of weekday and month MRFDSET TZ(Mandatory) day. 210301 WRFD020801 WRFD020802 WRFD020803 WRFD020805 MRFD210304
BSC6900 BSC6900
SMONTH
Start month
BSC6900
MRFD210301
BSC6900
CPU usage threshold for paging flow control over the short message service (SMS). When the average CPU usage of sliding windows reaches or exceeds the threshold, SET SMS paging FCCPUTHD(Option flow control is WRFDal) triggered. 040100 CPU usage threshold for recovery from paging flow control over the short message service (SMS). When the average CPU usage of smooth windows is lower than the threshold, SET SMS paging FCCPUTHD(Option flow control is WRFDal) stopped. 040100 CPU usage threshold for SMS RRC load sharing. When the CPU usage reaches or exceeds the threshold, SMS RRC SET connection SHARETHD(Option load sharing MRFDal) is triggered. 210101
BSC6900
BSC6900
BSC6900
Packet queue usage threshold for SMS RRC load sharing. When the packet queue usage reaches or exceeds this threshold, SMS RRC SET connection SHARETHD(Option load sharing MRFDal) is triggered. 210101
BSC6900
CPU usage threshold for recovery from SMS RRC load sharing. When the CPU usage is lower than this threshold, SMS RRC SET connection SHARETHD(Option load sharing MRFDal) is stopped. 210101
BSC6900
Packet queue usage threshold for recovery from SMS RRC load sharing. When the packet queue usage is lower than this threshold, SMS RRC SET connection SHARETHD(Option load sharing MRFDal) is stopped. 210101
BSC6900
SN
Slot No.
BSC6900
Number of CPU usage samples involved in SET the FCCPUTHD(Option calculation of al) the average SET CPU usage in FCMSGQTHD(Opti the sliding WRFDonal) window 040100 SWP BRD(Mandatory) STR BKP(Mandatory) CMP BRDAREA(Optional ) ULD RSTINFO(Mandator y) SET CLK(Mandatory) UPD JTGCPLD(Mandato ry) SET MPUBIND(Mandato ry) ADD BRD(Mandatory) LOD BRD(Optional) SYN BRDAREA(Optional ) CMP TBLDATA(Mandato ry) SET MSPCMD(Mandato ry) SET MSP(Mandatory) SET BFDPROTOSW(Ma Number of MRFDndatory) the slot 210301
SN
Slot No.
BSC6900
SN
Slot No.
BSC6900
This parameter is valid when the node type is set to UNI_AAL2S WITCH. It is the slot number of the SAAL link of the AAL2 signaling ADD bearing the ADJNODE(Mandat adjacent ory) node. None Number of the slot where the XPU ADD board is M3LNK(Mandatory) located None SET PHBMAP(Mandator y) ADD URNCCBCPUID(M andatory) ADD UIURGCONN(Man datory) ADD UIURCOMMSCCP( Mandatory) SET UNCELLDETECTS WITCH(Mandatory) EXP ALMLOG(Optional) STA ALMLOG(Optional)
SN
Slot No.
BSC6900
SN
Slot No
BSC6900
None MRFD210301
SN
Slot No.
BSC6900
SN
Slot No
BSC6900
None
SN
Slot No.
BSC6900
No. of the slot of the board. None Number of the slot where the alarm is MRFDgenerated 210304
SN
Slot No.
BSC6900
SN
Slot No.
BSC6900
Number of the slot where the alarm is generated, the number of the slot where the OMU ADD board is OBJALMSHLD(Opti positioned is MRFDonal) not supported 210304 LOP VCL(Mandatory) SWP ETHPORT(Mandat ory) ADD ETHREDPORT(Ma ndatory) Slot number SET for running VCLLOP(Optional) this command None
SN
BSC6900
SN
Slot No.
BSC6900
STR IMATST(Mandatory ) SET E1T1LOP(Mandator y) LOP E1T1(Mandatory) STR E1T1TST(Mandator y) SET OPTLOP(Mandator y) PING IP(Mandatory) TRC IPADDR(Mandatory ) SET QUEUEMAP(Mand atory) SET E1T1(Mandatory) ADD FRALNK(Mandatory ) ADD TSCROSS(Mandat ory) ADD IMAGRP(Mandatory ) ADD UNILNK(Mandatory
SN
Slot No.
BSC6900
ADD UCBSADDR(Mand atory) ADD UNODEB(Mandator UMTS XPU y) board slot No. None ADD ULASNAMAP(Mand atory) ADD Sharing UIMSISNAMAP(Ma Network Area WRFDndatory) Code. 021301
SNAC
BSC6900
SnaExistInd
BSC6900
BSC6900
Indicating whether the SNAC need be configured. TRUE: The SNAC need be configured. FALSE: The SNAC need not be ADD configured.U UIMSISNAMAP(Ma E can access ndatory) any cell the When it of is set to ON, the RNC sends UMTS cell load information to the GSM during the non-coverage based system relocation in or out process. When it is set to OFF, the RNC does not send UMTS cell load information to the GSM during the system relocation in or out process. This parameter is designed for the UMTS network to cooperate with the GSM SET network. UINTERRATHONC When the UE OV(Optional) is handed
WRFD021301 WRFD021303
WRFD020305 WRFD020306
SP
Sync Period
BSC6900
Synchronizati SET on period of SNTPCLTPARA(M the SNTP andatory) client service None As an integer, the OSP code can be expressed by a decimal digit or a hexadecimal digit. If the OSP code is expressed by a hexadecimal digit, H' is added before WRFDADD OPC(Optional) the number. 050301 Number of bits contained in the signaling WRFDpoint code 050301
SPC
BSC6900
SPCBITS
BSC6900
ADD OPC(Mandatory)
SPCDNF
BSC6900
OSP code expressed in the form of segments 8-88, see the parameter "Signal point data format" of the "ADD WRFDADD OPC(Optional) OPC" 050301
Indicating whether the UE speed estimation is allowed in this cell. Value ON indicates that the UE speed estimation is allowed in this cell. Value OFF indicates that the UE speed estimation is not allowed in this cell. The UE speed estimation cannot be triggered even if this switch is enabled in either of the following cases: -The cell is not configured as ADD a HCS cell by UCELLHCSHO(Opt "ADD WRFDional) UCELLHCS" 021200
SPDF
BSC6900
Data format of the specified signaling point. When this parameter is set to "WNF", the SPC is expressed in the form of an integer number. When this parameter is set to "NDF", the SPC is expressed in three segments. The number of bits included in each segment depends on the setting of the signaling point code bits parameter. When the ADD OPC(Optional) signaling ADD point code WRFDN7DPC(Optional) bits 050301
SPEED
Rate over the GE electrical port. When this parameter is set to 1000M, the GE electrical port performs negotiation at the rate of 1000 Mbit/s. If, however, the negotiation result is not 1000 Mbit/s, the negotiation fails. When this parameter is set to AUTO, the GE electrical port performs auto negotiation, and the negotiation result can be SET either 100 ETHPORT(Optional Mbit/s or ) 1000 Mbit/s. None
SpeedDepend Speed dependent entScalingFac scaling factor for tor reselection delay
BSC6900
For a highmobility UE, multiples this parameter by its reselection delay to reduce the reselection delay of the UE. This parameter can be set to 10 for middlespeed UE, which means no influence upon reselection delay time. This parameter is not configured when its value is 255. For detailed ADD information, UCELLSELRESEL( refer to 3GPP WRFDOptional) TS 25.304. 010801 Meaning: Identifies a group of cells that have specific capabilities for different service types. You can take any value that is not in use. The used values can be queried through the "LST USPG" WRFDcommand. 020806
SpgId
BSC6900
ADD USPG(Mandatory)
SpgId
BSC6900
Indicating which service priority group this cell belongs to. The service priorities of services in this cell can be obtained through this parameter. ADD For detailed UCELLSETUP(Man information of datory) this ADD parameter, UCELLQUICKSET refer to 3GPP WRFDUP(Mandatory) TS 25.304. 021200 This parameter indicates the scheduling priority of HSDSCH or EDCH data for interactive or background services. The value 11 indicates the highest priority, the value 2 indicates the lowest, and the other values (including 0, 1, 12, 13, 14 and 15) are SET reserved for USCHEDULEPRIO the other WRFDMAP(Mandatory) services. 020806
SPI
BSC6900
SPI
BSC6900
This parameter indicates the scheduling priority of HSDSCH or EDCH data. The value 15 indicates the highest priority, and SET the value 0 USPIFACTOR(Man indicates the WRFDdatory) lowest. 020806 STR IPLOPTST(Mandat Source port ory) number Whether the FTP client SET supports the FTPSCLT(Optional) state firewall
SPORTNO
BSC6900
None
SPTSTATEF WL
BSC6900
None
SpucHeavy
BSC6900
It is used to decide whether the cell load level is "Heavy" or not. It is denoted by the ratio of NodeB TX power to the maximum TX power. If the load of a cell is equal to or higher than this threshold, the load level of this cell is heavy. If the load level of a cell is heavy, the PUC algorithm will configure selection/rese lection parameters for this cell to lead the UE camping on ADD this cell to UCELLPUC(Option reselect WRFDal) another inter- 020105
SpucHyst
BSC6900
Hysteresis used to determine the cell load level. It is denoted by the ratio of NodeB TX power to the maximum TX power. It is used to avoid the unnecessary ping-pong effect of a cell between two load levels due to tiny load change. For detailed information of this ADD parameter, UCELLPUC(Option refer to 3GPP WRFDal) TS 25.304. 020105
SpucLight
BSC6900
It is used to decide whether the cell load level is "Light" or not. It is denoted by the ratio of NodeB TX power to the maximum TX power. If the load of a cell is equal to or lower than this threshold, the load level of this cell is light. If the load level of a cell is light, the PUC algorithm will configure selection/rese lection parameters for this cell to lead the UE to reselect ADD this cell rather UCELLPUC(Option than the WRFDal) previous inter- 020105 ADD OPC(Mandatory) ADD N7DPC(Mandatory) Uniquely ADD identifies an M3LE(Mandatory) OSP
SPX
OSP index
BSC6900
WRFD010101
SrbChlType
BSC6900
This parameter specifies the channel type of SRB. - DCH: Both uplink and downlink are preferably carried on DCH. - HSDPA: Uplink is preferably carried on DCH, and downlink is preferably carried on HSDSCH. - HSPA: Uplink is preferably carried on EDCH, and downlink is SET preferably UFRCCHLTYPEPA carried on HS- WRFDRA(Optional) DSCH. 010510
BSC6900
This parameter specifies whether [SRB channel type] is valid in the RRC connection setup procedure. - TRUE: [SRB channel type] is valid in the RRC connection setup procedure and other procedures. - FALSE: [SRB channel type] is invalid in the RRC connection setup SET procedure but UFRCCHLTYPEPA valid in other WRFDRA(Optional) procedures. 010510
SRBDL
WRFD050406
SRBGBR
BSC6900
The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_FACH state, this parameter determines the guaranteed speed of the MAC-c flow that sends ADD SRB data on UCELLEFACH(Opti the Iub WRFDonal) interface. 010688
SRBMBR
BSC6900
The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_FACH state, this parameter determines the maximum speed of the MAC-c flow that sends ADD SRB data on UCELLEFACH(Opti the Iub WRFDonal) interface. 010688
BSC6900
WRFD050406
SRBPRITH
Signaling primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the ADD signaling WRFDLOADEQ(Optional) service. 050404
BSC6900
WRFD050406
Signaling primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment of the ADD common WRFDLOADEQ(Optional) channel. 050404
SRBUL
SRCF
BSC6900
The batch file to be executed: The content of the batch file consists of service commands to be executed in batches. The source file is located in the FTP subdirectory of the OMU installation directory, and you should not add the path when entering the name. The characters (@, #, !, %, ^, &, *, /, ., [, ], \, :, ?, ', ", <, >, RUN and |) cannot BATCHFILE(Manda appear in the tory) file name. None
SRCGRD
BSC6900
SRCGRD
BSC6900
SET CLKMODE(Mandat Priority of the ory) clock source Priority of the clock source. There are four priorities (in ADD descending CLKSRC(Mandator order): 1, 2, y) 3, 4. PING MAC(Mandatory) TRC MAC(Mandatory)
MRFD210502
MRFD210502
SRCMEPID
MEP ID
BSC6900
BSC6900
SRCT
BSC6900
BSC6900
SRECTMR
Timer_REPEATSREC
BSC6900
SRN
Subrack No.
BSC6900
Specifies the frequency through which ER can be sent. If the second ER message is received before the timeout of the ADD timer, the link WRFDSAALLNK(Optional) is released. 050301 SWP BRD(Mandatory) STR BKP(Mandatory) CMP BRDAREA(Optional ) ULD LOGTOOMU(Mand atory) ULD RSTINFO(Mandator y) SET PWRALMSW(Mand atory) SET PWRPARA(Mandat ory) SET FANSPEED(Manda tory) SET SCUPORT(Mandat ory) UPD JTGCPLD(Mandato ry) ADD EMU(Mandatory) SET ALMPORT(Mandat ory) SET Number of MRFDMPUBIND(Mandato the subrack 210301 ADD SUBRACK(Mandat ory) SET Number of CLK(Mandatory) the subrack
SRN
Subrack No.
BSC6900
MRFD210301
SRN
Subrack No.
BSC6900
SRN
Subrack No.
BSC6900
ADD SAALLNK(Mandato ry) ADD ADJNODE(Mandat ory) ADD RSCGRP(Mandator y) SET PHBMAP(Mandator Number of y) the subrack
None
SRN
Subrack No.
BSC6900
ADD Number of M3LNK(Mandatory) the subrack ADD UIURGCONN(Man datory) ADD UIURCOMMSCCP( Mandatory) Subrack No SET UNCELLDETECTS No. of the WITCH(Mandatory) subrack. Number of COL LOG(Optional) the subrack EXP ALMLOG(Optional) STA ALMLOG(Optional) ADD OBJALMSHLD(Man datory) Number of the subrack where the indicator alarm to be queried is generated
None
SRN
Subrack No
BSC6900
None
SRN SRN
BSC6900 BSC6900
None None
SRN
Subrack No.
BSC6900
MRFD210304
SRN
Subrack No.
BSC6900
ADD ETHMD(Mandatory) ADD ETHTRK(Mandator y) ADD ETHTRKLNK(Mand atory) ADD ETHTRKIP(Mandat ory) STR ETHMIRRORPORT (Mandatory)
SRN
Subrack No.
BSC6900
SRName
Subrack name
BSC6900
The subrack number for running this command Number of the EPS ADD subrack UCBSADDR(Mand managing the atory) subsystem to ADD which the UNODEB(Mandator NodeB y) belongs ADD Name of the SUBRACK(Mandat subrack to be ory) added
None
None MRFD210301
When the parameter is set to YES, QoS control for DL BE services is based on the TCP and RLC retransmissio n. When the parameter is set to NO, QoS control for DL BE services is based on the TCP. In both situations, QoS control is not SET performed UQOSACT(Optiona across the Iur WRFDl) interface. 021101
BSC6900
SRNS relocationallowed traffic type. This parameter determines the bearing policy over the Iur interface. If the parameter is set to RT, only the realtime service can trigger the static relocation; if the parameter is set to NRT, only the nonreal-time service can trigger the static relocation; if the parameter is set to ALL, all services can trigger SET the static WRFDUSRNSR(Optional) relocation. 02060501
When [Measuremen t transfer delay by FP Node synchronizati on between SRNC and DRNC ]+[Estimated nonmeasurement delay offset] > [transfer delay provided by the Qos of the current traffic], the relocation will be triggered. The value of this parameter should be set according to the time delay concerned requirements of the most common services over the Iur WRFDSET interface. If 02060501 USRNSR(Optional) the value is
BSC6900
SRNS relocation expiry time. In order to avoid ping-pong relocation, the user, if successfully relocated, is not allowed to relocate again in the specified time SET of the WRFDUSRNSR(Optional) parameter. 02060501
Time interval between two SRNS relocations based on Iur resource optimization. For each time interval, the RNC specifies several UEs to perform the relocation based on Iur resource optimization. The parameter should be set according to the the time interval of the Iur source congestion report. The difference between the previous two values cannot be too large. Individually changing a SET parameter will WRFDUSRNSR(Optional) cause the 02060501
BSC6900
This parameter defines the duration of a timer, which starts after the separation of the SRNC and the CRNC. When the timer is expired, static relocation is triggered. This parameter determines the number of UEs over the Iur interface. If the parameter is set too large, too much Iur resources will be occupied; if the parameter is set too small, ping-pong SET relocation WRFDUSRNSR(Optional) may occur. 02060501
SrnsrSwitch
BSC6900
SRNSR algorithm switch. 1) SRNSR_DSC R_IUR_RES RCE_SWITC H: When the switch is on, relocation for transmission optimization over the Iur interface is allowed. When there is congestion over the Iur interface, the UE may be selected to initiate relocation or DSCR if the UE has only a radio link over the Iur interface and the link have the same attributes as the SET congested UCORRMALGOSW link. Based ITCH(Optional) on
BSC6900
Relocation trigger time after IURCCH. The relocation occurs after timeout. This parameter determines the probability of the relocation of the Iur common channel based on time separation. The larger the value of this parameter, the more UEs are carried over this Iur channel, and the more Iur resource is occupied; if the value of this parameter is set too small, no UE will be SET carried on the WRFDUSRNSR(Optional) Iur channel, 02060501
SRT SRTORD
BSC6900 BSC6900
Type of the subrack Sequence of alarm records Offset of the SSCH transmit power from the PCPICH transmit power in a cell.
MRFD210502 MRFD210304
SSCHPower
BSC6900
ADD USSCH(Optional)
WRFD020501
BSC6900
MRFD210304
BSC6900
CPU usage alarm threshold. When the CPU usage exceeds the threshold, a CPU usage alarm is reported. "CPU occupancy alarm clearance threshold" is smaller than "CPU occupancy SET alarm CPUTHD(Optional) threshold". This parameter specifies the type of source. - SPEECH: speech service ADD - UNKNOWN: UTYPRABBASIC(M non-speech andatory) service
MRFD210304
Ssd
Source description
BSC6900
BSC6900
DSP usage alarm clearance threshold. When the DSP usage is lower than the threshold, the DSP usage SET alarm is MRFDCPUTHD(Optional) cleared. 210304
BSC6900
DSP usage alarm threshold. When the DSP usage exceeds the threshold, a DSP usage alarm is reported. "DSP occupancy alarm clearance threshold" is smaller than "DSP occupancy SET alarm CPUTHD(Optional) threshold". Intra-system HCS cell reselection start threshold. When Srxlev of the serving cell is less than this parameter, the UE starts the intrafrequency and interfrequency measurement s so that better cells can be selected. For ADD details, refer UCELLHCS(Option to 3GPP TS al) 25.304.
MRFD210304
SsearchHCS
BSC6900
SsearchRat
BSC6900
Threshold for inter-RAT cell reselection. When the quality (CPICH Ec/No measured by UE) of the serving cell is lower than this threshold plus the [Qqualmin] of the cell, the inter-RAT cell reselection procedure will be started. This parameter is not configured when its value is 127. This parameter is not configured when its value is 127. The intraADD frequency cell UCELLSELRESEL( reselection Optional) has a priority STR BKP(Optional) ULD RSTINFO(Mandator y) LOD BRD(Optional) ADD URNCCBCPUID(M andatory) CMP TBLDATA(Mandato ry) ADD UIURGCONN(Man datory)
SSN
Subsystem No.
BSC6900
SSN
Subsystem No
BSC6900
MRFD210301
None
SSN
Subsystem No.
BSC6900
UMTS CPUS where the ADD NodeB is UNODEB(Optional) located. None Start synchronizati on number of EXP the alarm MRFDALMLOG(Optional) record 210304 MRFDSET TZ(Mandatory) Start of DST 210301 The operation time of the log record should be after this time. If this parameter is not specified, the start time MRFDEXP LOG(Optional) is not limited. 210305 If the time mode is set to "DAILY_T", "WEEKLY_T" , or "MONTHLY_ T", you ADD should set SUBTSK(Mandator this y) parameter. None The operation time of the log record should be after this time. If this parameter is not specified, the start time MRFDCOL LOG(Optional) is not limited. 210305 Start time of the alarm record. By default, the EXP start time is ALMLOG(Optional) 00:00:00.
SSSN ST
BSC6900 BSC6900
ST
Start Time
BSC6900
ST
Start Time
BSC6900
ST
Start Time
BSC6900
ST
Start Time
BSC6900
MRFD210304
ST
Start Time
BSC6900
Start time of the alarm record. By default, the STA start time is ALMLOG(Optional) 00:00:00.
MRFD210304
ST
Service type
BSC6900
Service type in the ATM. CBR and RTVBR carry real-time services. CBR and RTVBR are usually carried on the user planes of the Iur/Iub and Iu-CS interfaces. NRTVBR and UBR carry non-real-time services. NRTVBR and UBR are usually carried on the user plane and control ADD plane of the ATMTRF(Mandator Iu-PS y) interface. None
BSC6900
When a DCH is set up, the UE starts counting the number of faulty CRCs within a specified sliding window. If the number of faulty CRCs exceeds the specified threshold, event 5A is triggered. The length of the sliding window is specified by ADD Statistic Block UTYPRABQUALIT Number For YMEAS(Mandatory) 5A Event.
WRFD021101 WRFD020309
STARTAID
Start Alarm ID
BSC6900
EXP ALMLOG(Optional) Start number STA of the alarm MRFDALMLOG(Optional) record 210304 When the parameter is set to INACTIVE, the GPS frame timing measurement is not activated. When the parameter is set to ACTIVE, the GPS frame ADD timing UCELLGPSFRMTI measurement MING(Optional) is activated.
StartFlag
WRFD020802 WRFD020803
StartTime1
BSC6900
Start time of the first interval when the "Cell dynamic ADD shutdown" UCELLDYNSHUTD feature is WRFDOWN(Mandatory) valid. 020117 Start time of the second interval when the "Cell dynamic ADD shutdown" UCELLDYNSHUTD feature is WRFDOWN(Mandatory) valid. 020117 Start time of the third interval when the "Cell dynamic ADD shutdown" UCELLDYNSHUTD feature is WRFDOWN(Mandatory) valid. 020117 SET UIUTIMERANDNU CN protection WRFDM(Optional) timer. 010101 Protection timer used in case of the DSP link intermittence at the neighboring WRFDRNC. 010101
StartTime2
StartTime3
Third Cell Dynamic ShutDown Interval Start Time BSC6900 CN protection timer[ms]
StateIndTmr
BSC6900
BSC6900
ADD UNRNC(Optional)
STATLEN
MaxSTAT
BSC6900
WRFD050301
STD
Start Date
BSC6900
ADD OP(Mandatory)
MRFD210305
STP
ADD N7DPC(Optional)
Whether to enable the signaling point with the signaling transfer WRFDfunction 050301
BSC6900
This parameter specifies the DL MBR of SET streaming for UUSERMBR(Optio DRNC HSPA WRFDnal) User. 050424 The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_FACH state, this parameter determines the guaranteed speed of the MAC-c flow that sends streaming ADD service data UCELLEFACH(Opti on the Iub WRFDonal) interface. 010688
BSC6900
BSC6900
SET UFRC(Optional)
This parameter specifies the rate threshold of 2ms TTI on the E-DCH for HSUPA streaming service. When the cell capability and UE capability allows 2ms TTI, 2ms TTI on the E-DCH is used if the PS streaming service carried on HSUPA with uplink rate isn't less than this threshold. Otherwise, 10ms TTI is used.
WRFD010632 WRFD01061403
BSC6900
The MAC-c on Iub interface will increase after the Enhanced CELL_FACH is supported in the cell. When the UE enters the Enhanced CELL_FACH state, this parameter determines the maximum speed of the MAC-c flow that sends streaming ADD service data UCELLEFACH(Opti on the Iub WRFDonal) interface. 010688 This parameter specifies the UL MBR of SET streaming for UUSERMBR(Optio DRNC HSPA WRFDnal) User. 050424 Start time. The input format is MRFDHH&MM&SS. 210305 This parameter indicates whether the SCCPCH uses STTD or not. For detailed information of this parameter, refer to 3GPP WRFD25.346. 022000
BSC6900
STT
Start Time
BSC6900
ADD OP(Mandatory) ADD UAICH(Optional) ADD UCELLMBMSSCCP CH(Optional) ADD UPICH(Optional) ADD USCCPCHBASIC( Optional) SET UMBMSSCCPCH( Optional)
STTDInd
STTD indicator
BSC6900
STTDSupInd
BSC6900
This parameter indicates whether the cell supports the space ADD time transmit UEXT3GCELL(Opti diversity WRFDonal) (STTD). 020203 This parameter indicates whether ADD STTD TX UCELLSETUP(Man diversity is datory) supported. This parameter specifies the logical serial number of a subflow for the typical RAB. A bearer may use several subflows for transmission. For example, AMR speech service may use three traffic subflows, which correspond to three transport channels. Subflows 0, 1, and 2 carry bit flows of classes A, B, and C respectively. ADD For other UTYPRABOLPC(M types of andatory) RABs, there ADD is only one UTYPRABRLC(Ma subflow. ndatory) Therefore,
STTDSupInd
BSC6900
WRFD022000
BSC6900
BSC6900
Maximum subframe length. This parameter indicates the maximum sub-frame length for multiplexing. If the length of a subframe exceeds this WRFDvalue, the sub- 050420 frame is not WRFDmultiplexed. 050412
SUBID
Subtask ID
BSC6900
SUBNET
Subnet No
BSC6900
Number of the scheduled subtask None Subnet Number in a BSC None Indicating whether the cell supports the CBS service.
SupBmc
CBS support
BSC6900
WRFD011000
BSC6900
This parameter specifies whether the NodeB allows setting of the downlink DPCH spreading factor to 512. If this parameter is set to TRUE, the NodeB allows setting of the downlink DPCH spreading WRFDfactor to 512. 010510
This parameter indicates whether to support the mode change ADD of downlink UEXT3GCELL(Opti power control WRFDonal) (DPC). 020203
This parameter specifies whether the NodeB supports setting of DPC MODE to TRIPLET. - If this parameter is set to TRUE, the NodeB supports setting of DPC MODE to TRIPLET. - If this parameter is set to FALSE, DPC MODE is always WRFDSINGLE. 010510
SuppIurCch
BSC6900
BSC6900
Indicates whether to support establishing IUR-CCH between the RNC and the ADD neighboring UNRNC(Optional) RNC. Whether to use Back-up SET CLK(Optional) port for LINE1
BSC6900
CR supported by the ADD protocol UCNNODE(Optiona version of the WRFDl) CN. 010101
BSC6900
Identifying whether the inter-RAT cell supports PS HO. TRUE indicates that the inter-RAT cell is able to perform the handover procedure with relocation. FALSE indicates that ADD the cell is UEXT2GCELL(Opti unable to do WRFDonal) so. 02030802 This parameter specifies whether the NodeB supports PS real-time services being carried WRFDon HSDPA. 010630
BSC6900
Identifying whether the inter-RAT cell supports RIM. (RIM is used to obtain the SI/PSI information of the inter-RAT cell.) For the details of RIM process, refer ADD to the 3GPP UEXT2GCELL(Opti TS 25.901 WRFDonal) protocol. 02030801 Operating SET state of the ALMPORT(Optional environment ) alarm port
SW
Switch
BSC6900
MRFD210304
SW
BSC6900
If this parameter is set to "ON", you must set "OMU automatic switchover interval". Otherwise, "OMU automatic SET switchover ASWPARA(Mandat interval" is not ory) displayed. None
SWEEK
Start week
BSC6900
Switch
Port switch
BSC6900
SWITCH
Weekday on which DST SET TZ(Mandatory) starts SET State of the SCUPORT(Mandat panel port ory) switch SET Switch for the SLFSLVSW(Manda OMU selftory) healing
MRFD210301 MRFD210301
None
SWITCH
BSC6900
Grace Protection Period Switch determines whether to enter the SET grace LICENSECTRL(Ma protection MRFDndatory) period. 210403 Turn on or SET turn off the BFDPROTOSW(Ma BFD protocol ndatory) switch None
SWITCH
This parameter is valid only when CNDomainId is set to "CS_DOMAI N". When the parameter is set to ON, the RNC supports the contents of CR 0125 in 3GPP 25.415. When the parameter is set to OFF, the RNC does not support the ADD contents of UCNNODE(Optiona CR 0125 in WRFDl) 3GPP 25.415. 010101 The field indicates whether the primary path can be ADD switched SCTPLNK(Optional back when it ) is available.
BSC6900
WRFD050403
BSC6900
The association is smoothly switched over to the primary path after the number of ADD heartbeat SCTPLNK(Optional responses is WRFD) received. 050403
BSC6900
None
BSC6900
None
BSC6900
None
BSC6900
None
BSC6900
None
BSC6900
None
BSC6900
None
BSC6900
None
BSC6900
None
SWOP
Whether to enable the local user SET management MRFDOPSW(Mandatory) function 210305
SWSEQ
BSC6900
Sequence of the start week MRFDSET TZ(Mandatory) of DST 210301 When call shock control starts, the AMR_RRC number can SET be accessed UCALLSHOCKCTR per second WRFDL(Optional) for system. 040100 Contact way of the Base Station Controller SET SYS(Optional) supplier
BSC6900
MRFD210301
SYSDESC
Description of the Base Station MRFDSET SYS(Optional) Controller 210301 When call shock control starts, the register and 3G->2G reselect number can SET be accessed UCALLSHOCKCTR per second WRFDL(Optional) for system. 040100
BSC6900
A timer to RNC wait for PS RESUME after SET successful USTATETIMER(Op CS InterRAT WRFDtional) handover. 010101 Location of the Base Station SET SYS(Optional) Controller
BSC6900
MRFD210301
SYSOBJECTI D NE Name
BSC6900
Name of the Base Station Controller of Network MRFDSET SYS(Optional) Element 210301 When call shock control starts, it is the SET max number UCALLSHOCKCTR of RRC_REJ WRFDL(Optional) message. 040100 Services provided by the Base Station SET SYS(Optional) Controller
BSC6900
MRFD210301
When the RRC REQ total number of one system reach this threshold in period and can't been shared out to other CPUS system, the RRC flow control will be triggered. New RRC SET REQ will be UCALLSHOCKCTR rejected or WRFDL(Optional) discarded. 040100
T10TMR
When the reception of a TFP causes unavailability of a route, this timer is started to regularly check SET whether the MTP3TMR(Optional route is WRFD) recovered. 050301 This timer is a protection timer waiting for an uninhibit acknowledge ment message (LUA) from the peer end after an uninhibit message SET (LUN) is sent MTP3TMR(Optional to the peer WRFD) end. 050301 This timer is a protection timer waiting for a force uninhibit acknowledge ment message (LUA) from the peer end after a force uninhibit message SET (LFU) is sent MTP3TMR(Optional to the peer WRFD) end. 050301
T12TMR
T13TMR
BSC6900
T14TMR
This timer is a protection timer waiting for an inhibition acknowledge ment message (LIA) from the peer end after an inhibition message SET (LIN) is sent MTP3TMR(Optional to the peer WRFD) end. 050301 This timer is started when a link fails to be started. The restart of the link is SET initiated after MTP3TMR(Optional this timer WRFD) expires. 050301 When a normal changeover cannot be initiated, services will be changed over to an alternative link after this timer expires SET to avoid MTP3TMR(Optional disorder of WRFD) data. 050301 After a local link is inhibited, this timer is started to regularly check the management SET states at both MTP3TMR(Optional ends of the WRFD) link. 050301
T17TMR
BSC6900
T1TMR
BSC6900
T22TMR
BSC6900
T23TMR
BSC6900
After a remote link is inhibited, this timer is started to regularly check the management SET states at both MTP3TMR(Optional ends of the WRFD) link. 050301 This timer is a protection timer waiting for an extended changeover acknowledge ment message (XCA) from the peer end after an extended changeover order message SET (XCO) is sent MTP3TMR(Optional to the peer WRFD) end. 050301
T2TMR
BSC6900
T300
Timer 300[ms]
BSC6900
T300 is started when UE sends the RRC CONNECTIO N REQUEST message. It is stopped when UE receives the RRC CONNECTIO N SETUP message. RRC CONNECTIO N REQUEST will be resent upon the expiry of the timer if V300 is lower than or equal to SET N300, else UIDLEMODETIME enter idle WRFDR(Optional) mode. 010101
T302
Timer 302[ms]
BSC6900
T302 is started after the UE transmits the CELL UPDATE/UR A UPDATE message and stopped after the UE receives the CELL UPDATE CONFIRM/U RA UPDATE CONFIRM message. CELL UPDATE/UR A UPDATE will be resent upon the expiry of the timer if V302 less than or equal to N302; otherwise, the UE will enter idle mode. SET Protocol UCONNMODETIM default value WRFDER(Optional) is 4000. 010101
T304
Timer 304[ms]
BSC6900
T304 is started after the UE sends the UE CAPABILITY INFORMATI ON message and stopped after the UE receives the UE CAPABILITY INFORMATI ON CONFIRM message. UE CAPABILITY INFORMATI ON will be resent upon the expiry of the timer if V304 less than or equal N304; otherwise the cell update procedure will be initiated. SET Protocol UCONNMODETIM default value WRFDER(Optional) is 2000. 010101
T305
Timer 305[min]
BSC6900
T305 is started after the UE receives CELL UPDATE CONFIRM/U RA UPDATE CONFIRM in CELL_FACH, URA_PCH or CELL_PCH state. It is stopped after the UE enters another state. CELL UPDATE will be transmitted upon the expiry of this timer if T307 is not activated and the UE detects "in service area"; otherwise, T307 will be started. Protocol SET default value UCONNMODETIM is 30. "Infinity" WRFDER(Optional) means the 010101
T307
Timer 307[s]
BSC6900
T307 is started after T305 has expired and the UE detects "out of service area". It is stopped after the UE detects "in service area". The UE will enter idle mode upon SET expiry.Protoc UCONNMODETIM ol default WRFDER(Optional) value is 30. 010101 T308 is started after the UE transmits RRC CONNECTIO N RELEASE COMPLETE. This message will be sent upon the expiry of the Timer if V308 less than or equal to N308, otherwise, the UE will enter idle mode. SET Protocol UCONNMODETIM default value WRFDER(Optional) is 160. 010101
T308
Timer 308[ms]
BSC6900
T309
Timer 309[s]
BSC6900
T309 is started after the UE is reselected to a cell belonging to another radio access system in connected mode, or the CELL CHANGE ORDER FROM UTRAN message is received. It is stopped after the UE is successfully connected in the new cell. The UE will continue the connection to UTRAN upon expiry. SET Protocol UCONNMODETIM default value WRFDER(Optional) is 5. 010101 T312 is started when UE starts to establish a DCH, and stopped when UE detects consecutive N312 "in sync" indications from L1. It SET indicates UIDLEMODETIME physical R(Optional) channel setup SET failure upon UCONNMODETIM the expiry of WRFDER(Optional) the timer. 010101
T312
Timer 312[s]
BSC6900
T313
Timer 313[s]
BSC6900
T313 is started after the UE detects consecutive N313 "out of sync" indications from L1. T313 is stopped after the UE detects consecutive N315 "in sync" indications from L1.It indicates Radio Link (RL) failure upon expiry. SET Protocol UCONNMODETIM default value WRFDER(Optional) is 3. 010101
T314
Timer 314[s]
BSC6900
T314 is started when the criteria for radio link failure are fulfilled and only radio bearers (RBs) associated with T314 exist.T314 is stopped after the Cell Update procedure has been completed. Protocol default value is 12. In case of the RL failure when the UE is in CELL_DCH state, If the RL cannot be successfully reconfigured by CELL UPDATE CONFIRM SET before the UCONNMODETIM expiry of the WRFDER(Optional) correspondin 010101
T315
Timer 315[s]
BSC6900
T315 is started when the criteria for radio link failure are fulfilled, and only the radio bearer associated with T315 exists.T315 is stopped after the Cell Update procedure has been completed. Protocol default value is 180. In case of the RL failure when the UE is in CELL_DCH state, T315 (or T314) is started and CELL UPDATE is sent. If the RL cannot be SET successfully UCONNMODETIM reconfigured WRFDER(Optional) by CELL 010101
T316
Timer 316[s]
BSC6900
T316 is started after the UE detects "out of service area" in URA_PCH or CELL_PCH state.T316 is stopped after the UE detects "in service area".The cell update procedure will be initiated upon the expiry of the timer if "in service area" is detected; otherwise, T317 will be started. The UE will enter CELL_FACH state and initiate cell update procedure when the UE SET detects "in UCONNMODETIM service area". WRFDER(Optional) Protocol 010101
T3212
BSC6900
Value of the periodical location update timer. The periodical update procedure is implemented by the MS through the location update procedure. The value 0 indicates that the periodical update procedure is not used. This parameter is valid only when [CN ADD domain ID] is UCNDOMAIN(Optio set as WRFDnal) CS_DOMAIN. 010101
T381
Timer 381[ms]
BSC6900
T381 is started after the RNC send message "RRC CONNECTIO N SETUP"(or "CELL UPDATE CONFIRM"). If T381 expire and RNC does not receive "RRC CONNECTIO N SETUP COMPLETE"( or the response of "ELL UPDATE CONFIRM") and V381 is smaller than N381, RNC resend "RRC CONNECTIO N SETUP"(or "CELL UPDATE CONFIRM") SET and restart UCONNMODETIM timer T381 WRFDER(Optional) and increase 010101 When a normal changeback cannot be initiated, services will be changed back to a normal link only after this timer expires SET to avoid MTP3TMR(Optional disorder of WRFD) data. 050301
T3TMR
BSC6900
T4TMR
BSC6900
This timer is a protection timer waiting for a changeback acknowledge ment message (CBA) from the peer end after the first changeback declaration SET (CBD) is sent MTP3TMR(Optional to the peer WRFD) end. 050301 This timer is a protection timer waiting for a changeback acknowledge ment message (CBA) from the peer end after the second changeback declaration SET (CBD) is sent MTP3TMR(Optional to the peer WRFD) end. 050301 This timer is started when a transmission prohibited message (TFP) is sent. The TFP will not be sent any more SET during the MTP3TMR(Optional running of WRFD) this timer. 050301
T5TMR
BSC6900
T8TMR
TAC
TAC
BSC6900
WRFD021304 WRFD021311
BSC6900
This parameter specifies the target number of the RLC retransmissio ns. In the link quality adjust algorithm for E-FACH, When the measured retransmissio ns are higher than the target number, Ec/N0 should be decreased. SET Otherwise, URACHMEASURE Ec/N0 should WRFDPARA(Optional) be increased. 010688
Threshold of the target frequency for triggering interfrequency measurement with measurement quantity of Ec/No for CS domain services. For CS domain services, if the value of [Interfrequency measure report mode] is set to EVENT_TRI GGER, this parameter is used to set the measurement control of SET event 2B. UINTERFREQHOC One of the OV(Optional) necessary ADD conditions for UCELLINTERFRE triggering WRFDQHOCOV(Optional) event 2B can 020302
Threshold of the target frequency for triggering interfrequency measurement with measurement quantity of RSCP for CS domain services. For CS domain services, if the value of [Interfrequency measure report mode] is set to EVENT_TRI GGER, this parameter is used to set the measurement control of SET event 2B. UINTERFREQHOC One of the OV(Optional) necessary ADD conditions for UCELLINTERFRE triggering WRFDQHOCOV(Optional) event 2B can 020302
BSC6900
Threshold of the target frequency for triggering interfrequency measurement with measurement quantity of Ec/No for PS domain HSPA services. For HSPA services, if the value of [Interfrequency measure report mode] is set to EVENT_TRI GGER, this parameter is used to set the measurement control of SET event 2B. UINTERFREQHOC One of the OV(Optional) necessary ADD conditions for UCELLINTERFRE triggering WRFDQHOCOV(Optional) event 2B can 020302
BSC6900
Threshold of the target frequency for triggering interfrequency measurement with measurement quantity of RSCP for PS domain HSPA services. For HSPA services, if the value of [Interfrequency measure report mode] is set to EVENT_TRI GGER, this parameter is used to set the measurement control of SET event 2B. UINTERFREQHOC One of the OV(Optional) necessary ADD conditions for UCELLINTERFRE triggering WRFDQHOCOV(Optional) event 2B can 020302
BSC6900
Threshold of the target frequency for triggering interfrequency measurement with measurement quantity of Ec/No for PS domain nonHSPA services. For PS domain nonHSPA services, if the value of [Interfrequency measure report mode] is set to EVENT_TRI GGER, this parameter is used to set the SET measurement UINTERFREQHOC control of OV(Optional) event 2B. ADD One of the UCELLINTERFRE necessary WRFDQHOCOV(Optional) conditions for 020302
BSC6900
Threshold of the target frequency for triggering interfrequency measurement with measurement quantity of RSCP for PS domain nonHSPA services. For PS domain nonHSPA services, if the value of [Interfrequency measure report mode] is set to EVENT_TRI GGER, this parameter is used to set the SET measurement UINTERFREQHOC control of OV(Optional) event 2B. ADD One of the UCELLINTERFRE necessary WRFDQHOCOV(Optional) conditions for 020302
BSC6900
Quality requirement for the interRAT cell during an inter-RAT handover with CS domain services. For CS domain services, if the value of [Interfrequency measure report mode] is set to EVENT_TRI GGER, this parameter is used to set the measurement control of event 3A. One of the necessary conditions for SET triggering UINTERRATHOCO event 3A can V(Optional) be met only ADD when the UCELLINTERRATH quality of the WRFDOCOV(Optional) target 020303
BSC6900
Quality requirement for the interRAT cell during an inter-RAT handover with HSDPA services. For PS domain services, if the value of [Interfrequency measure report mode] is set to EVENT_TRI GGER, this parameter is used to set the measurement control of event 3A. One of the necessary conditions for SET triggering UINTERRATHOCO event 3A can V(Optional) be met only ADD when the UCELLINTERRATH quality of the WRFDOCOV(Optional) target 020303
BSC6900
Quality requirement for the interRAT cell during an inter-RAT handover with PS domain non-HSDPA services. For PS domain nonHSDPA services, if the value of [Interfrequency measure report mode] is set to EVENT_TRI GGER, this parameter is used to set the measurement control of event 3A. One of the SET necessary UINTERRATHOCO conditions for V(Optional) triggering ADD event 3A can UCELLINTERRATH be met only WRFDOCOV(Optional) when the 020303
TB
Number of the output segment 1: Segment 1 describes the basic information of the equipment. 2: Segment 2 describes the connection information. 3: Segment 3 describes the module information. 4: Segment 4 describes the configuration information. 5: Segment 5 describes the information of the peer equipment. 6: Segment 6 describes the version information of the host. 7: Segment 7 describes the EXP cabinet DEVFILE(Optional) information. None This parameter specifies the number of Mac-hs transport block indexes that can be used in HSSET SCCH Less UHSSCCHLESSOP Operation WRFDPARA(Optional) mode. 010687
TbIndexNum
TbNumber1
TB number of TF1
BSC6900
This parameter defines the number of the transport blocks correspondin g to the TF 1 of the RLC size in the TF set. The parameter value should not be 0 if there is only one TF. For detailed information of this ADD parameter, UFACHDYNTFS(O refer to 3GPP WRFDptional) TS 25.302. 021000 This parameter defines the number of the transport blocks correspondin g to the TF 1 of the above RLC size in the TF set. The parameter value should ADD not be 0 if UPCHDYNTFS(Opt there is only WRFDional) one TF. 021000
TbNumber1
TB number of TF1
BSC6900
TbNumber1
TB number of TF1
BSC6900
TbNumber2
TB number of TF2
BSC6900
This parameter defines the number of the transport blocks correspondin g to the TF 1 of the above RLC size in the TF set. The parameter value should ADD not be 0 if URACHDYNTFS(O there is only ptional) one TF. This parameter defines the number of the transport blocks correspondin g to the TF 2 of the RLC size in the TF set. For detailed information of this ADD parameter, UFACHDYNTFS(O refer to 3GPP ptional) TS 25.302.
WRFD021000
WRFD021000
TbNumber2
TB number of TF2
BSC6900
This parameter defines the number of the transport blocks correspondin g to the TF 2 ADD of the above UPCHDYNTFS(Opt RLC size in WRFDional) the TF set. 021000
TbNumber2
TB number of TF2
BSC6900
TbNumber3
TB number of TF3
BSC6900
This parameter defines the number of the transport blocks correspondin g to the TF 2 ADD of the above URACHDYNTFS(O RLC size in ptional) the TF set. This parameter defines the number of the transport blocks correspondin g to the TF 3 of the RLC size in the TF set. For detailed information of this ADD parameter, UFACHDYNTFS(O refer to 3GPP ptional) TS 25.302.
WRFD021000
WRFD021000
BSC6900
This parameter specifies the index of the Mac-hs transport block size that can be used in HSSCCH Less Operation mode. The mapping between the index and the transport block size is defined in the SET Appendix A of UHSSCCHLESSOP 3GPP TS WRFDPARA(Optional) 25.321. 010687
BSC6900
This parameter specifies the index of the Mac-hs transport block size that can be used in HSSCCH Less Operation mode. The mapping between the index and the transport block size is defined in the SET Appendix A of UHSSCCHLESSOP 3GPP TS WRFDPARA(Optional) 25.321. 010687
BSC6900
This parameter specifies the index of the Mac-hs transport block size that can be used in HSSCCH Less Operation mode. The mapping between the index and the transport block size is defined in the SET Appendix A of UHSSCCHLESSOP 3GPP TS WRFDPARA(Optional) 25.321. 010687
BSC6900
This parameter specifies the index of the Mac-hs transport block size that can be used in HSSCCH Less Operation mode. The mapping between the index and the transport block size is defined in the SET Appendix A of UHSSCCHLESSOP 3GPP TS WRFDPARA(Optional) 25.321. 010687
TC
Test code
BSC6900
Test code for the MTP3 link. After the successful test, the link can be used for carrying signaling services. If the test fails, the MTP3 periodically sends the fault locating command until the operation is successful. When the link is deleted or deactivated, the system stops to send the fault locating ADD command. MTP3LNK(Optional The default WRFD) value is 170. 050301
TCell
Time offset[chip]
BSC6900
Difference between the System Frame Number (SFN) and NodeB Frame Number (BFN) of the NodeB which the cell belongs to. It is recommende d that Tcell of difference cells under one NodeB should be unique. For ADD detailed UCELLSETUP(Man information of datory) this ADD parameter, UCELLQUICKSET refer to 3GPP WRFDUP(Mandatory) TS 25.433. 022000 Uniquely identifying a cell. WRFD020202 WRFD020203
TCellId
Target cell ID
BSC6900
HO UCELL(Optional)
TCLEN
BSC6900
Test code length of the signaling link. ADD By default, MTP3LNK(Optional the value is WRFD) 10. 050301
TCRmax
Maximum duration of cell reselection. This parameter, along with the [Max number of cell reselection], is used for rate evaluation in HCS. For ADD details, refer UCELLHCS(Option to 3GPP TS WRFDal) 25.304. 021200 Time before reverting to low-mobility measurement . For detailed information of this ADD parameter, UCELLHCS(Option refer to 3GPP WRFDal) TS 25.304. 021200 Hysteresis time before non-HCS resuming slow movement. When UE is in high-speed movement, if the number of cell reselections is less than Ncrnonhcs, the UE resumes to slow movement. For detailed ADD information, UCELLSELRESEL( refer to 3GPP WRFDOptional) TS 25.304. 010801
TCrmaxHyst
BSC6900
Maximum duration of non-HCS cell reselection. If the number of cell reselection exceed the value of this parameter during Tcrmaxnonhc s, the UE is not in highspeed movement. For detailed ADD information, UCELLSELRESEL( refer to 3GPP WRFDOptional) TS 25.304. 010801
TCycleSlow
BSC6900
Cycle timer for deciding whether the UE is in lowmobility state. This timer provides the time for the RNC to decide whether the UE is in lowmobility state. The smaller the value is, the more frequently the state estimation is triggered. If the parameter is set to 0, it SET is an UHCSHO(Optional) indication that ADD the state UCELLHCSHO(Opt estimation is WRFDional) not triggered. 021200
Enable Temperature Alarm TEMP_MASK Reporting BSC6900 TEMP_THD_ Upper Limit of HIGH Temperature Alarm BSC6900 TEMP_THD_ Lower Limit of LOW Temperature Alarm BSC6900
TempOffset1
BSC6900
Offset of HCS cell CPICH RSCP measurement value in cell selection or reselection. The larger the value of the parameter, the lower the probability of ADD selecting UINTRAFREQNCE neighboring LL(Optional) cells. The ADD smaller the UINTERFREQNCE value of the LL(Optional) parameter, ADD the higher the U2GNCELL(Option probability of al) doing so. Offset of cell CPICH Ec/No measurement value in cell selection or reselection. The larger the value of the parameter, the lower the probability of selecting neighboring cells. The ADD smaller the UINTRAFREQNCE value the LL(Optional) parameter, ADD the higher the UINTERFREQNCE probability of LL(Optional) doing so.
TempOffset2
BSC6900
BSC6900
This parameter is valid when the correspondin g parameter related to the reporting period unit for the event E of AMR service is set to TEN_MSEC. The DL code TX power is reported periodically after the event Ea is reported. This parameter specifies the reporting ADD period. If the UCELLQUALITYM parameter is EAS(Optional) set to A, the SET reporting UQUALITYMEAS(O period is A x ptional) 10 ms.
BSC6900
This parameter is valid when the correspondin g parameter related to the reporting period unit for the event E of BE service is set to TEN_MSEC. The DL code TX power is reported periodically after the event Ea is reported. This parameter specifies the reporting ADD period. If the UCELLQUALITYM parameter is EAS(Optional) set to A, the SET reporting UQUALITYMEAS(O period is A x ptional) 10 ms.
BSC6900
This parameter is valid when the correspondin g parameter related to the reporting period unit for the event F of BE service is set to TEN_MSEC. The DL code TX power is reported periodically after the event Fa is reported. This parameter specifies the reporting ADD period. If the UCELLQUALITYM parameter is EAS(Optional) set to A, the SET reporting UQUALITYMEAS(O period is A x WRFDptional) 10 ms. 021101
DL basic common measurement report cycle. For detailed SET information of ULDM(Mandatory) this SET parameter, USATLDM(Mandat refer to 3GPP WRFDory) TS 25.433. 020102 Measurement report period of event E triggered by DL OLC. For detailed information of this parameter, refer to 3GPP WRFDTS 25.433. 020102
BSC6900
SET ULDM(Mandatory)
BSC6900
Measurement report period of event E triggered by DL OLC. For detailed information of this SET parameter, USATLDM(Mandat refer to 3GPP WRFDory) TS 25.433. 020102 This parameter specifies the HSDPA bit rate measurement report period. For detailed SET information of ULDM(Mandatory) this SET parameter, USATLDM(Mandat refer to 3GPP WRFDory) TS 25.433. 020102 HSDPA power requirement measurement report period For detailed SET information of ULDM(Mandatory) this SET parameter, USATLDM(Mandat refer to 3GPP WRFDory) TS 25.433. 020102 This parameter specifies the HSUPA bit rate measurement report period. For detailed information of this parameter, refer to 3GPP WRFDTS 25.433. 020102
BSC6900
BSC6900
BSC6900
SET ULDM(Mandatory)
UL basic common measurement report cycle. For detailed SET information of ULDM(Mandatory) this SET parameter, USATLDM(Mandat refer to 3GPP WRFDory) TS 25.433. 020102 Measurement report period of event E triggered by UL OLC. For detailed SET information of ULDM(Mandatory) this SET parameter, USATLDM(Mandat refer to 3GPP WRFDory) TS 25.433. 020102
BSC6900
BSC6900
This parameter is valid when the correspondin g parameter related to the reporting period unit for the event E of VP service is set to TEN_MSEC. The DL code TX power is reported periodically after the event Ea is reported. This parameter specifies the reporting ADD period. If the UCELLQUALITYM parameter is EAS(Optional) set to A, the SET reporting UQUALITYMEAS(O period is A x WRFDptional) 10 ms. 020304
TFastSpdEst
Time window for estimating whether the UE is in highmobility state. The start point of the estimation is the moment of the last reporting of event 1D, and the backdated time length is determined by this parameter. If the parameter is set to 0, the SET RNC does UHCSHO(Optional) not decide ADD whether the UCELLHCSHO(Opt UE is in high- WRFDional) mobility state. 021200
BSC6900
This parameter indicates whether the SCCPCH involves the TFCI. When the downlink blind transport format detection function is used, the TFCI is unavailable. For detailed information of this parameter, refer to 3GPP TS 25.433. Note: This parameter is configured only for the SCCPCH in the formats 8 WRFDto 17. 022000
TFsNumber
Number of TFs
BSC6900
This parameter defines the number of the transport formats correspondin g to the RLC size in the TF set. For detailed information of this ADD parameter, UFACHDYNTFS(M refer to 3GPP WRFDandatory) TS 25.302. 021000
TFsNumber
Number of TFs
BSC6900
This parameter defines the number of the transport ADD formats UPCHDYNTFS(Ma correspondin ndatory) g to the ADD above RLC URACHDYNTFS(M size in the TF WRFDandatory) set. 021000 SWP OMUAREA(Mandat ory) Target OMU ADD TGWIP(Mandatory) TGW ID
TG TGWID
BSC6900 BSC6900
None None
This parameter indicates the address of the operation and maintenance ADD console for TGWIP(Mandatory) TGW. None
This parameter indicates the mask of the operation and maintenance ADD console for TGWIP(Mandatory) TGW. None Slot number of the BSC6900 interface board ADD interworking TGWIP(Mandatory) with TGW.
TGWPEERS N
BSC6900
None
TGWPEERS RN
BSC6900
Subrack number of the BSC6900 interface board ADD interworking TGWIP(Mandatory) with TGW. None
Thd5A
When a DCH is set up, the UE starts counting the number of faulty CRCs within a specified sliding window. If the number of faulty CRCs exceeds the specified threshold, event 5A is triggered. The ADD threshold is UTYPRABQUALIT Event 5A WRFDYMEAS(Mandatory) Threshold. 021101 If DL code TX power is higher than the Ea absolute threshold, event Ea is triggered. This event triggers DL QoS operation. This parameter specifies a relative threshold. Absolute Ea threshold = ADD RL Max DL UTYPRABQUALIT TX power YMEAS(Mandatory) ThdEa.
ThdEa
BSC6900
ThdEb
BSC6900
If DL code TX power is lower than the Eb absolute threshold, event Eb is triggered. When this event report is received, DL QoS operation is stopped. This parameter specifies a relative threshold. Absolute Eb threshold = ADD RL Max DL UTYPRABQUALIT TX power YMEAS(Mandatory) ThdEb.
THP
BSC6900
This parameter specifies the Traffic Handling Priority (THP) of the RAB assignment, which is defined only for interactive service. The value 1 means the highest priority, the value 14 means the lowest priority, and SET the value 15 USCHEDULEPRIO means no WRFDMAP(Mandatory) priority. 050424
THP10Class
BSC6900
This parameter specifies the priority class associated with PS interactive service whose THP(Traffic Handling Priority) is 10. The priority class includes High, Medium and Low, which is used to classify the SET GBR for PS UIAVUSERTHPCL interactive WRFDASS(Optional) services. 050424 This parameter specifies the priority class associated with PS interactive service whose THP(Traffic Handling Priority) is 11. The priority class includes High, Medium and Low, which is used to classify the SET GBR for PS UIAVUSERTHPCL interactive WRFDASS(Optional) services. 050424
THP11Class
BSC6900
THP12Class
BSC6900
This parameter specifies the priority class associated with PS interactive service whose THP(Traffic Handling Priority) is 12. The priority class includes High, Medium and Low, which is used to classify the SET GBR for PS UIAVUSERTHPCL interactive WRFDASS(Optional) services. 050424 This parameter specifies the priority class associated with PS interactive service whose THP(Traffic Handling Priority) is 13. The priority class includes High, Medium and Low, which is used to classify the SET GBR for PS UIAVUSERTHPCL interactive WRFDASS(Optional) services. 050424
THP13Class
BSC6900
THP14Class
BSC6900
This parameter specifies the priority class associated with PS interactive service whose THP(Traffic Handling Priority) is 14. The priority class includes High, Medium and Low, which is used to classify the SET GBR for PS UIAVUSERTHPCL interactive WRFDASS(Optional) services. 050424 This parameter specifies the priority class associated with PS interactive service whose THP(Traffic Handling Priority) is 15. The priority class includes High, Medium and Low, which is used to classify the SET GBR for PS UIAVUSERTHPCL interactive WRFDASS(Optional) services. 050424
THP15Class
BSC6900
THP1Class
BSC6900
This parameter specifies the priority class associated with PS interactive service whose THP(Traffic Handling Priority) is 1. The priority class includes High, Medium and Low, which is used to classify the SET GBR for PS UIAVUSERTHPCL interactive WRFDASS(Optional) services. 050424 This parameter specifies the priority class associated with PS interactive service whose THP(Traffic Handling Priority) is 2. The priority class includes High, Medium and Low, which is used to classify the SET GBR for PS UIAVUSERTHPCL interactive WRFDASS(Optional) services. 050424
THP2Class
BSC6900
THP3Class
BSC6900
This parameter specifies the priority class associated with PS interactive service whose THP(Traffic Handling Priority) is 3. The priority class includes High, Medium and Low, which is used to classify the SET GBR for PS UIAVUSERTHPCL interactive WRFDASS(Optional) services. 050424 This parameter specifies the priority class associated with PS interactive service whose THP(Traffic Handling Priority) is 4. The priority class includes High, Medium and Low, which is used to classify the SET GBR for PS UIAVUSERTHPCL interactive WRFDASS(Optional) services. 050424
THP4Class
BSC6900
THP5Class
BSC6900
This parameter specifies the priority class associated with PS interactive service whose THP(Traffic Handling Priority) is 5. The priority class includes High, Medium and Low, which is used to classify the SET GBR for PS UIAVUSERTHPCL interactive WRFDASS(Optional) services. 050424 This parameter specifies the priority class associated with PS interactive service whose THP(Traffic Handling Priority) is 6. The priority class includes High, Medium and Low, which is used to classify the SET GBR for PS UIAVUSERTHPCL interactive WRFDASS(Optional) services. 050424
THP6Class
BSC6900
THP7Class
BSC6900
This parameter specifies the priority class associated with PS interactive service whose THP(Traffic Handling Priority) is 7. The priority class includes High, Medium and Low, which is used to classify the SET GBR for PS UIAVUSERTHPCL interactive WRFDASS(Optional) services. 050424 This parameter specifies the priority class associated with PS interactive service whose THP(Traffic Handling Priority) is 8. The priority class includes High, Medium and Low, which is used to classify the SET GBR for PS UIAVUSERTHPCL interactive WRFDASS(Optional) services. 050424
THP8Class
BSC6900
THP9Class
BSC6900
This parameter specifies the priority class associated with PS interactive service whose THP(Traffic Handling Priority) is 9. The priority class includes High, Medium and Low, which is used to classify the SET GBR for PS UIAVUSERTHPCL interactive WRFDASS(Optional) services. 050424
THPClass
BSC6900
This parameter specifies the Traffic Handling Priority (THP) class that the THP priority is mapped to. This parameter is valid for only interactive services. The mapping relationship between the traffic handling priority value of INTERACTIV E service and its correspondin g class can be set through command SET SET UUSERGBR(Mand UIAVUSERT WRFDatory) HPCLASS. 050424 Load balance threshold type. It indicates the ADD threshold TRMLOADTH(Man calculation datory) mode. None Whether to limit the operation time of the operator Time
THTYPE
Threshold type
BSC6900
TIME TIME
BSC6900 BSC6900
MRFD210305 None
TIMEOUT
PING IP(Optional)
TIMEOUT
TRC IPADDR(Optional)
Timeout time for waiting for the TRACERT packet WRFDresponse 050425
Timeout
Time Out
BSC6900
PING MAC(Optional)
TIMEOUT
Time Out
BSC6900
Indicates the timeout time of the CFM link tracing WRFDTRC MAC(Optional) detection 050425 Specifying the time limitation for blocking a cell when normal BLK priority is WRFDUCELL(Mandatory) selected. 020101 Timer_CU timer. The parameter affects the AAL2 transport ADD efficiency and AAL2PATH(Optiona transport WRFDl) delay. 050301 Indicates the times of sending PING packets None
Timer
Block time[s]
BSC6900
TIMERCU
Timer_CU timer
BSC6900
TIMES
BSC6900
PING IP(Optional)
This parameter defines the length of the inter-freq coverage handover delay to trig. If the interfreq coverage handover priority of the reported interfreq measure cells are equal to the highest priority, start inter-freq handover. If the interfreq coverage handover priority of the reported interfreq measure cells are lower than the highest SET priority of the UINTERFREQHOC measure OV(Optional) cells, start the ADD inter-freq UCELLINTERFRE coverage WRFDQHOCOV(Optional) handover 020302 This parameter specifies the delay time to start the retransmissio n ratio monitoring after the RLC ADD entity is UTYPRABRLC(Opti established or WRFDonal) reconfigured. 040100
BSC6900
Time delay to trigger event 2B. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower probability of incorrect decision, but the slower the response of event 2B to the change of measured signals. Based on the existing emulation result, the trigger delay time is set to effectively SET reduce the UINTERFREQHOC average OV(Optional) number of ADD handovers UCELLINTERFRE and the QHOCOV(Optional) number of
WRFD020302 WRFD020304
BSC6900
Time delay to trigger event 2D. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower probability of incorrect decision, but the slower the response of event 2D to the change of measured signals. Based on the existing emulation result, the trigger delay time is set to effectively SET reduce the UINTERFREQHOC average OV(Optional) number of ADD handovers UCELLINTERFRE and the WRFDQHOCOV(Optional) number of 020302
BSC6900
Time delay to trigger the event 2F. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower probability of incorrect decision, but the slower the response of event 2F to the change of measured signals. Based on the existing emulation result, the trigger delay time is set to effectively SET reduce the UINTERFREQHOC average OV(Optional) number of ADD handovers UCELLINTERFRE and the WRFDQHOCOV(Optional) number of 020302
BSC6900
Time delay for triggering handovers to GSM cells with nonverified BSIC. During the period of time specified by this parameter, if the signal quality in a neighboring GSM cell satisfies interRAT handover conditions and the neighboring GSM cell is not verified, an inter-RAT handover is triggered. SET When the UINTERRATHOCO value of this V(Optional) parameter is ADD 65535, the UCELLINTERRATH RNC does OCOV(Optional) not perform ADD inter-RAT UCELLMBDRINTE handovers to RRAT(Optional) non-verified
WRFD020303 WRFD020309
Time delay for hard handover triggered by periodical reports. Only the interfrequency cell in which the signal quality meets the requirement in all periodical reports during the period of time specified by this parameter can be selected as the target cell in the interfrequency handover. The larger the SET value of this UINTERFREQHOC parameter, OV(Optional) the lower ADD probability of UCELLINTERFRE incorrect QHOCOV(Optional) decision, but ADD the slower the UCELLMBDRINTE response of WRFDRFREQ(Optional) the handover 020302
BSC6900
Time delay for triggering handovers to GSM cells with verified BSIC. During the period of time specified by this parameter, if the signal quality in a neighboring GSM cell satisfies interRAT handover conditions and the neighboring GSM cell is verified, an inter-RAT handover is triggered. SET The interUINTERRATHOCO RAT V(Optional) handover ADD conditions are UCELLINTERRATH as follows: OCOV(Optional) Mother_RAT ADD + CIO >= UCELLMBDRINTE Tother_RAT RRAT(Optional) + H/2
WRFD020303 WRFD020309
BSC6900
This parameter specifies the time from the moment when the traffic volume of the DCH exceeds the upper threshold to the moment when the traffic-related event 4A on DCH is triggered. This parameter is used to avoid unnecessary reports triggered by DCH traffic volume fluctuation. The larger the value of this parameter, the longer the required duration of ADD the traffic UTYPRABDCCCM volume WRFDC(Optional) exceeding the 021101
BSC6900
BSC6900
This parameter specifies the time from the moment when the traffic volume on the DCH falls below the lower threshold to the moment when the traffic-related event 4B is triggered. This parameter is set to avoid unnecessary reports triggered by DCH traffic fluctuation. The larger the value of this parameter, the longer the required duration of the traffic volume ADD keeping UTYPRABDCCCM below the C(Optional) lower This parameter specifies the number of consecutive periods during which the percentage of retransmitted RLC PDUs is higher than the threshold ADD of event A UTYPRABRLC(Opti before event onal) A is triggered.
WRFD021101
WRFD040100
BSC6900
This parameter specifies the number of consecutive periods during which the percentage of retransmitted RLC PDUs is lower than the threshold of ADD event B UTYPRABRLC(Opti before event WRFDonal) B is triggered. 040100 When the operation time of the OMU exceeds the value specified by this parameter, some records SET are deleted LOGLIMIT(Optional from the MRFD) operation log. 210305 When the time mode is set to "ONTIME", ADD you should SUBTSK(Mandator set this y) parameter. None
TL
Time Limit
BSC6900
TM
Execute Time
BSC6900
TM1
Execute Time 1
BSC6900
TM2
Execute Time 2
BSC6900
If the time mode is set to "DAILY_T", "WEEKLY_T" , or "MONTHLY_ T", you should set this parameter. This parameter specifies the first execution time in the day in which ADD the scheduled SUBTSK(Mandator task is y) executed. None If the time mode is set to "DAILY_T", "WEEKLY_T" , or "MONTHLY_ T", you should set this parameter. This parameter specifies the second execution time in the day in which the scheduled ADD task is SUBTSK(Optional) executed. None
TM3
Execute Time 3
BSC6900
TM4
Execute Time 4
BSC6900
If the time mode is set to "DAILY_T", "WEEKLY_T" , or "MONTHLY_ T", you should set this parameter. This parameter specifies the third execution time in the day in which the scheduled ADD task is SUBTSK(Optional) executed. None If the time mode is set to "DAILY_T", "WEEKLY_T" , or "MONTHLY_ T", you should set this parameter. This parameter specifies the fourth execution time in the day in which the scheduled ADD task is SUBTSK(Optional) executed. None
TM5
Execute Time 5
BSC6900
If the time mode is set to "DAILY_T", "WEEKLY_T" , or "MONTHLY_ T", you should set this parameter. This parameter specifies the fifth execution time in the day in which the scheduled ADD task is SUBTSK(Optional) executed. None
TMI
TRMMAP ID
BSC6900
ADD TRMMAP(Mandator TRMMAP y) index Bronze user TRMMAP index used by ADD the current ADJMAP(Mandator adjacent y) node Gold user TRMMAP index used by ADD the current ADJMAP(Mandator adjacent y) node Silver user TRMMAP index used by ADD the current ADJMAP(Mandator adjacent y) node
WRFD050406
TMIBRZ
BSC6900
WRFD021305 WRFD050424
TMIGLD
WRFD021305 WRFD050424
TMISLV
BSC6900
WRFD021305 WRFD050424
BSC6900
Maximum rate of the accumulated alarm blink duration to the alarm blink measurement period. Assume this threshold is not 0. When the rate of accumulated alarm blink duration exceeds the threshold, an alarm is reported. For querying the alarm blink measurement period, see "LST ALMBLKSW". For setting the alarm blink measurement SET period, see ALMBLKPARA(Opti "SET MRFDonal) ALMBLKSW". 210304
BSC6900
Minimum rate of the accumulated alarm blink duration to the alarm blink measurement period. Assume this threshold is not 0. When the rate of accumulated alarm blink duration is lower than the threshold, an alarm is reported. For querying the alarm blink measurement period, see "LST ALMBLKSW". For setting the alarm blink measurement SET period, see ALMBLKPARA(Opti "SET MRFDonal) ALMBLKSW". 210304 This timer is a protection timer waiting for a signalling link test acknowledge ment message (SLTA) from the peer end after a signalling link test message SET (SLTM) is MTP3TMR(Optional sent to the WRFD) peer end. 050301
TMT1TMR
BSC6900
TMT2TMR
BSC6900
This timer is used to send the signalling link test messages SET (SLTM) to the MTP3TMR(Optional peer end WRFD) regularly. 050301
TNAME
Data Table
BSC6900
Name of the data table CMP distributed on MRFDTBLDATA(Optional) the board. 210301
BSC6900
WRFD050301 WRFD050410 MRFD211502 WRFDBearer type 021311 ADD used over the WRFDUNRNC(Mandatory) Iur interface. 040202
BSC6900
WRFDADD Bearer type 050301 UCNNODE(Optiona used over the WRFDl) Iu interface 050409
BSC6900
Transport ADD type of the WRFDUNODEB(Optional) Iub interface. 050402 Offset to DST, namely, the adjustment to MRFDSET TZ(Mandatory) time. 210301
TO
AdjustMethod
BSC6900
ToAWE
BSC6900
End point of the arrival window of DL data frame. Normally, it is forecasted that a DL data frame will arrive before the time specified by this parameter. The value of this parameter is ADD a positive UCELLMBMSFACH value relative (Optional) to latest time ADD of arrival WRFDUPCH(Optional) (LTOA). 022000 A positive value relative to Latest Time of Arrival (LToA). It indicates the endpoint of the arrival time window for a downlink data frame. Normally the downlink data frame arrives before that time.For detailed ADD information of UFACH(Mandatory) this SET parameter, UMBMSFACH(Opti refer to 3GPP WRFDonal) TS 25.402. 022000
ToAWE
BSC6900
ToAWS
BSC6900
Start point of the arrival window of DL data frame. Normally, it is forecasted that a DL data frame will arrive after the time specified by this parameter. The value of ADD this UCELLMBMSFACH parameter is (Optional) a positive ADD value relative WRFDUPCH(Optional) to ToAWE. 022000 A positive value relative to Time of arrival window endpoint (ToAWE). It indicates the startpoint of the arrival time window for a downlink data frame. Normally the downlink data frame arrives after that time.For detailed ADD information of UFACH(Mandatory) this SET parameter, UMBMSFACH(Opti refer to 3GPP WRFDonal) TS 25.402. 022000
ToAWS
BSC6900
BSC6900
TP
Log Type
BSC6900
The cell is shut down automatically only when the total user number is no greater than the threshold. The total user number consists of ADD the DCH and UCELLDYNSHUTD CCH user WRFDOWN(Optional) numbers. 020117 Type of the host log to be collected. If this parameter is set to NORMAL, the text log in the \common\fam \famlog directory of the OMU installation path is collected and saved in the \common\fam \famlog directory of the OMU installation path. If this parameter is set to FORMAT, the binary log in the \common\fam \famlogfmt directory of the OMU COL installation FAMLOG(Mandator path is y) collected and None
BSC6900
HCS cell reselection penalty timer. The larger the value of the parameter, ADD the longer the UINTRAFREQNCE HCS penalty LL(Optional) time. The ADD smaller the UINTERFREQNCE value of the LL(Optional) parameter, ADD the shorter U2GNCELL(Option the HCS al) penalty time.
BSC6900
CPU usage threshold for debugging tracing flow control. When the average CPU usage of sliding windows reaches or exceeds the threshold, debugging SET tracing flow FCCPUTHD(Option control is WRFDal) triggered. 040100 Packet queue usage threshold for debugging tracing flow control. When the average packet queue usage of sliding windows reaches or exceeds the threshold, debugging SET tracing flow FCMSGQTHD(Opti control is WRFDonal) triggered. 040100
BSC6900
BSC6900
CPU usage threshold for recovery from debugging tracing flow control. When the average CPU usage of smooth windows is lower than the threshold, debugging SET tracing flow FCCPUTHD(Option control is WRFDal) stopped. 040100 Packet queue usage threshold for recovery from debugging tracing flow control. When the average packet queue usage of smooth windows is lower than the threshold, debugging SET tracing flow FCMSGQTHD(Opti control is WRFDonal) stopped. 040100 Whether to control the debugging tracing flow
BSC6900
TRACESW
SET FCSW(Optional)
WRFD040100
TrafficClass
Traffic Class
BSC6900
This parameter specifies the traffic class. Based on Quality of Service (QoS), there are four traffic classes: conversationa l, streaming, ADD interactive, UTYPRABBASIC(M and andatory) background.
TrafficClass
Traffic Class
BSC6900
This parameter specifies the traffic class that the service belongs to. The traffic class here only includes interactive and background, and the SPI(Schedule Priority Indicator) of the other classes such as conversationa l or streaming are SET configured by USCHEDULEPRIO default WRFDMAP(Mandatory) values. 050424
TrafficClass
Traffic Class
BSC6900
This parameter specifies the traffic class that the service belongs to. BE services are of three classes: interactive, SET background UUSERGBR(Mand and IMS atory) signalling. This SET parameter UDTXDRXPARA(M specifies the andatory) traffic type.
WRFD050424
TrafficClass
Traffic class
BSC6900
WRFD010686
TrafficClass
Traffic class
BSC6900
This parameter specifies the traffic class. According to the QoS requirements of services, there are four traffic classes: conversationa l, streaming, SET interactive, UFACHBANDWIDT and WRFDH(Mandatory) background. 010688 This SET parameter UHSSCCHLESSOP specifies the PARA(Mandatory) traffic class. This SET parameter UUSERHAPPYBR( specifies the Mandatory) traffic class.
TrafficClass
Traffic class
BSC6900
WRFD010687
TrafficClass
Traffic class
BSC6900
WRFD01061010
TrafficType
Traffic Type
BSC6900
This parameter specifies the traffic type for ADD the RRC UCELLREDIRECTI redirection WRFDON(Mandatory) algorithm. 020120 This parameter specifies the traffic type for SET the RRC UREDIRECTION(M redirection andatory) algorithm. Traffic mode of the M3UA link set. At present, only the active/standb y and load sharing mode is available. If the M3UA links in the link set work in overriding mode, only one link in the link set works in the active mode, and all other links work in the standby mode. In this case, only the active link carries traffic, and the standby links do not carry any traffic. When the active link is faulty, the standby link ADD with the M3LKS(Optional) highest
TrafficType
Traffic Type
BSC6900
WRFD020120
TRAMODE
Traffic mode
BSC6900
WRFD050409
BSC6900
Transfer Common Channel User number Value range: 0~10 Content: When the system is overloaded and congested, users on the DCH can be reconfigured to the CCH in order to reduce the cell load and recover the system. The mechanism of the OLC is that an action is performed in each [OLC period] and some services are selected based on the ADD action rules to UCELLOLC(Option perform this WRFDal) action. This 020107 This parameter specifies the round-trip transport delay of Iub interface when the transmission mode is ATM transmission or of IP ADD dedicated WRFDUNODEB(Optional) network. 050301
BSC6900
TRANST
Transport Type
BSC6900
TRANST
Transport Type
BSC6900
ADD ADJNODE(Mandat Transport ory) type Transport type of the adjacent node to which ADD the path IPPATH(Mandatory) belongs Transport type of the ADD adjacent ADJMAP(Mandator node and y) interface type
TRANST
BSC6900
WRFD021305 WRFD050424
TRANST
Transport Type
BSC6900
TRANST
Transport Type
BSC6900
WRFD050406 MRFD211503
TrChId
BCH ID
BSC6900
ADD UBCH(Optional)
TrChId
FACH ID
BSC6900
Uniquely identifying a FACH in a cell. Configured according to the product specifications WRFD. 010101
TrChId
PCH ID
BSC6900
ADD UPCH(Optional) ADD Uniquely UPCHDYNTFS(Opt identifying a WRFDional) PCH in a cell. 010101 ADD URACH(Optional) ADD URACHDYNTFS(O ptional) Uniquely identifying an RACH in a WRFDcell. 010101
TrChId
RACH ID
BSC6900
TrchType
BSC6900
This parameter specifies the ADD type of UTYPRABHSPA(M transport andatory) channel.
WRFD010610 WRFD010612
TrchType
BSC6900
This parameter specifies the type of uplink transport ADD channel for UTYPRABOLPC(M the typical WRFDandatory) RAB. 020503
TrchType
BSC6900
This parameter specifies the local transport channel type for the typical traffic. When this typical traffic is applied on UL, it refers to the UL transport channel type. When this typical traffic is applied on DL, it refers ADD to the DL UTYPRABRLC(Ma transport ndatory) channel type.
BSC6900
Related length for 1D records in the best cells. In the speed estimation algorithm, an algorithm is adopted to avoid inaccurate estimation caused by frequent handovers of best cells. That is, during the latest [TRELATELE NGTH], if more than one event 1D of a certain cell occurs, the event 1D record is restored to the state when the 1st SET event 1D UHCSHO(Optional) occurs during ADD the latest UCELLHCSHO(Opt [TRELATELE WRFDional) NGTH]. The 021200
BSC6900
If the signal quality (CPICH Ec/No measured by the UE) of a neighboring cell is better than that of the serving cell during the specified time of this parameter, the UE reselects the neighboring cell. It is used to avoid pingpong reselection between different cells. Note that the value 0 corresponds to the default value defined in the protocol. Set the parameter as ADD follows: UCELLSELRESEL( 1. Ensure that Optional) the UE can
BSC6900
This parameter indicates the UE reselection delay in the CELL_FACH connection mode. This parameter is not configured when the value is 255. Instead, the Treselections parameter is used. For detailed ADD information, UCELLSELRESEL( refer to 3GPP Optional) TS 25.304. This parameter indicates the UE reselection delay in the CELL_PCH or URA_PCH connection mode. This parameter is not configured when the value is 255. Instead, the Treselections parameter is used. For detailed ADD information, UCELLSELRESEL( refer to 3GPP Optional) TS 25.304. ADD ATMTRF(Mandator y) Traffic index
WRFD010801 WRFD010802
WRFD010801 WRFD010802
TRFX
Traffic index
BSC6900
None
TrigTime1A
BSC6900
TrigTime1A
BSC6900
Delay to trigger the event 1A. The value of this parameter is SET related to USMLC(Mandatory) This slow fading. parameter specifies the time delay to trigger event 1A. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower the incorrect decision probability, but the slower the response of the event to measurement signal change. The purposes of the time-totrigger mechanism SET are as UINTRAFREQHO( follows: Optional) Reducing the ADD number of UCELLINTRAFRE wrong event QHO(Optional) reports
WRFD020801
WRFD020202 WRFD020203
TrigTime1B
BSC6900
Delay to trigger the event 1B. The value of this parameter is SET related to WRFDUSMLC(Mandatory) slow fading. 020801
TrigTime1B
BSC6900
This parameter specifies the time delay to trigger event 1B. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower the incorrect decision probability, but the slower the response of the event to measurement signal change. The purposes of the time-totrigger mechanism SET are as UINTRAFREQHO( follows: Optional) Reducing the ADD number of UCELLINTRAFRE wrong event QHO(Optional) reports
WRFD020202 WRFD020203
TrigTime1C
BSC6900
This parameter specifies the time delay to trigger event 1C. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower the incorrect decision probability, but the slower the response of the event to measurement signal change. The purposes of the time-totrigger mechanism SET are as UINTRAFREQHO( follows: Optional) Reducing the ADD number of UCELLINTRAFRE wrong event QHO(Optional) reports
WRFD020202 WRFD020203
TrigTime1D
BSC6900
This parameter specifies the time delay to trigger event 1D. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower the incorrect decision probability, but the slower the response of the event to measurement signal change. The purposes of the time-totrigger mechanism SET are as UINTRAFREQHO( follows: Optional) Reducing the ADD number of UCELLINTRAFRE wrong event QHO(Optional) reports
WRFD020202 WRFD020203
TrigTime1F
BSC6900
This parameter specifies the time delay to trigger 1F. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower the incorrect decision probability, but the slower the response of the event to measurement signal change. The purposes of the time-totrigger mechanism SET are as UINTRAFREQHO( follows: Optional) Reducing the ADD number of UCELLINTRAFRE wrong event QHO(Optional) reports
TrigTime1J
BSC6900
This parameter specifies the time delay to trigger event 1J. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower probability of incorrect decision, but the slower the response of event to the change of measured signals. The purposes of the time-totrigger mechanism are as SET follows: UINTRAFREQHO( Reducing the Optional) number of ADD wrong event UCELLINTRAFRE reports QHO(Optional) caused by
WRFD020202 WRFD020203
TrigTime2C
BSC6900
Time delay to trigger the event 2C. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower probability of incorrect decision, but the slower the response of event 2F to the change of measured signals. Based on the existing emulation SET result, the UINTERFREQHON trigger delay COV(Optional) time is set to ADD effectively UCELLINTERFRE reduce the QHONCOV(Option average al) number of ADD handovers UCELLMBDRINTE and the WRFDRFREQ(Optional) number of 021200
TrigTime2D
BSC6900
Time delay to trigger the event 2D. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower probability of incorrect decision, but the slower the response of event 2F to the change of measured signals. Based on the existing emulation result, the hysteresis value is set to effectively SET reduce the UINTERRATHOCO average V(Optional) number of ADD handovers UCELLINTERRATH and the WRFDOCOV(Optional) number of 020303
TrigTime2F
BSC6900
Time delay to trigger the event 2F. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower probability of incorrect decision, but the slower the response of event 2F to the change of measured signals. Based on the existing emulation result, the hysteresis value is set to effectively SET reduce the UINTERRATHOCO average V(Optional) number of ADD handovers UCELLINTERRATH and the WRFDOCOV(Optional) number of 020303
TrigTime3A
BSC6900
Time delay to trigger the event 3A. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower the incorrect decision probability, but the slower the response of the event 3A to measurement signal change. Based on the existing emulation result, the hysteresis value is set to SET effectively UINTERRATHOCO reduce the V(Optional) average ADD number of UCELLINTERRATH handovers WRFDOCOV(Optional) and the 020303
TrigTime3C
BSC6900
Time delay to trigger the event 3C. The value of this parameter correlates with slow fading. The larger the value of this parameter, the lower the incorrect decision probability, but the slower the response of the event 3C to measurement signal change. Based on the existing emulation SET result, the UINTERRATHONC hysteresis OV(Optional) value is set to ADD effectively UCELLINTERRATH reduce the ONCOV(Optional) average ADD number of UCELLMBDRINTE handovers RRAT(Optional) and the
WRFD020305 WRFD020306
TrigTime6F
BSC6900
To guarantee the power control performance within a time slot, that is, to ensure that the power control within a time slot is implemented based on all links in the active set, the ideal UE RxTx time difference should be 1024 chips. When the UE Rx-Tx time difference becomes greater than the predefined threshold, event 6F will be triggered. For the definition and its related SET details, refer UHOCOMM(Option to the 3GPP al) TS 25.331
WRFD020202 WRFD020203
TrigTime6G
BSC6900
To guarantee the power control performance within a time slot, that is, to ensure that the power control within a time slot is implemented based on all links in the active set, the ideal UE RxTx time difference should be 1024 chips. When the UE Rx-Tx time difference becomes smaller than the predefined threshold, event 6G will be triggered. For the definition and its related SET details, refer UHOCOMM(Option to the 3GPP al) TS 25.331 Port number ADD of the ETHTRKLNK(Mand aggregation atory) member Slot number ADD of the ETHTRKLNK(Mand aggregation atory) member
WRFD020202 WRFD020203
TRKLNKPN
BSC6900
MRFD210103
TRKLNKSN
MRFD210103
TRKN
Trunk No.
BSC6900
ADD ETHTRK(Mandator y) ADD ETHTRKLNK(Mand atory) ADD ETHTRKIP(Mandat aggregation MRFDory) group number 210103
TRlFailure
BSC6900
Radio Link Failure Timer Duration. When the radio link set is in the synchronized state, the NodeB starts the timer after it receives successive out-of-sync indications of the number defined by NOutsyncInd. The NodeB shall stop and reset the timer after receiving successive insync indications of the number defined by NInsyncInd. When the timer expires, the NodeB triggers the ADD radio link UCELLSETUP(Opti failure WRFDonal) process, and 022000
TRM load threshold ADD index. The AAL2PATH(Optiona TRM load l) threshold ADD must be RSCGRP(Optional) configured. TRM load threshold index. The TRM load threshold must be configured.
WRFD050405 WRFD050406
ADD IPPATH(Optional)
WRFD050404 WRFD050408
TRM load threshold index. It is the ADD unique ID of TRMLOADTH(Man the load datory) threshold. TRM load threshold index TRM load threshold index TRM load threshold index
WRFD050406 MRFD211503
ADD FRALNK(Optional)
WRFD050302
TRMLOADTH TRM load threshold INDEX index BSC6900 TRMLOADTH TRM load threshold INDEX index BSC6900
WRFD050304 WRFD050405
TRMLOADTH TRM load threshold INDEX index BSC6900 TRMLOADTH TRM load threshold INDEX index BSC6900 TRMLOADTH TRM load threshold INDEX index BSC6900
TRM load threshold index TRM load ADD threshold MPGRP(Optional) index ADD TRM load ATMLOGICPORT( threshold Optional) index ADD PPPLNK(Optional) ADD TRM load IPLOGICPORT(Opt threshold ional) index
None
None
None
WRFD050408
TRncId
BSC6900
HO UCELL(Optional)
TRUNKN
BSC6900
ADD Trunk group IPLOGICPORT(Opt number of the ional) logical port None
TRUNKN
BSC6900
STR IPCHK(Optional)
TRUNKN
Trunk No.
BSC6900
TS
BSC6900
None
BSC6900
SET E1T1(Optional)
WRFD05030101
TSBITMAP
BSC6900
WRFD050302 WRFD050105
TSBITMAP
BSC6900
TSBITMAP
BSC6900
TSCROSSX
BSC6900
None
TSKN
Task Name
BSC6900
ADD SCHTSK(Mandator y) SET SCHTSKSW(Optio nal) ADD SUBTSK(Optional) ADD SUBCMD(Optional) Name of the STR scheduled SCHTSK(Optional) task.
None
Time window for deciding whether the UE is in lowmobility state. Every time the slow speed cycle timer times out, the RNC estimates whether the UE is in lowmobility state. SET The UHCSHO(Optional) backdated ADD time length is UCELLHCSHO(Opt set by this WRFDional) parameter. 021200 MGWTST SET user IMSI in a UMGWTST(Mandat number ory) segment. None STR IPLOPTST(Optional Detection ) duration (s) Indicating whether SET setting UMGWTST(Mandat MGWTST ory) Switch on.
TstImsi
BSC6900
TSTLEN
Test Len[s]
BSC6900
None
TstSwitch
None
TTL
Time to Live
BSC6900
PING IP(Optional)
TTL
PKT TTL
BSC6900
Indicates the live time of the packet for CFM link tracing TRC MAC(Optional) detection None
TXBW
TxBw
WRFD050406
TXBW
Backward ADD bandwidth of ATMLOGICPORT( the logical WRFDMandatory) port 050405 This parameter indicates whether to activate TX diversity of the downlink ADD common UEXT3GCELL(Man channel of datory) the cell.
BSC6900
WRFD020203
BSC6900
This parameter indicates whether transmission diversity configuration of the cell's downlink common ADD physical UCELLSETUP(Man channels is datory) activated.
WRFD022000 WRFD040203
TXINT
PING IP(Optional)
Indicates the interval between the two sent PING packets None
TXINT
BSC6900
None
TXTRFX
BSC6900
WRFD050301 WRFD05030105
TXTRFX
BSC6900
TX traffic record index of the AAL2 Path on the out BSC6900 port (ATM layer PVC traffic). The traffic index is configured in the ATM ADD traffic table AAL2PATH(Mandat (see "LST ory) ATMTRF").
TXTRFX
BSC6900
WRFD05030105 WRFD050301
TXTRFX
BSC6900
Sending ADD traffic index of VPCLCX(Mandator the low end WRFDy) VPL/VCL 050301
TYPE
Finish Type
BSC6900
Explanation of the finish type of the batch commands 1. ANY_ERR_R ETURN: If there is a command whose execution fails, the execution of the batch commands is stopped and the execution of the file fails. 2. ALL_END_R ETURN: If all commands in the batch file are executed in one operation, the execution of the file is successful no matter RUN whether there BATCHFILE(Manda is execution tory) failure in the None Upper layer application type, including CCP, NCP, ALCAP, and SET operation and CTRLFACTOR(Ma maintenance ndatory) link IPoAPVC None
TYPE
Application Type
BSC6900
This parameter indicates the DL frequency of a cell. Depending on the value of [BandId], as shown below: Band1 Common frequencies [1056210838] Special frequencies none Band2 Common frequencies [9662-9938] Special frequencies {412, 437, 462, 487, 512, 537, 562, 587, 612, 637, 662, 687} Band3 Common frequencies ADD [1162-1513] UEXT3GCELL(Opti Special WRFDonal) frequencies 020203
Depending on the value of [Band indication], as shown below: Band1 General frequencies: [1056210838] Additional frequencies: none Band2 General frequencies: [9662-9938] Additional frequencies: {412,437,462, 487,512,537, 562,587,612, 637,662,687} Band3 General frequencies: [1162-1513] Additional frequencies: ADD none UCELLSETUP(Opti Band4 onal) General ADD frequencies: UCELLQUICKSET [1537-1738] WRFDUP(Optional) Additional 010101
BSC6900
This parameter defines the UL frequency of a cell. If the UL frequency is unspecified and the value of [Band indication] is Band1, Band2, Band3, Band4, Band5, Band6, Band7, Band8 or Band9, the default UL frequency is as follows: If the DL frequency belongs to common frequencies, then Band1: UL frequency = DL frequency 950 ADD Band2: UL UEXT3GCELL(Opti frequency = WRFDonal) DL frequency - 020203
BSC6900
Depending on the value of [Band indication], as shown below: Band1: General frequencies: [9612-9888] Additional frequencies: none Band2: General frequencies: [9262-9538] Additional frequencies: {12,37,62,87, 112,137,162, 187,212,237, 262,287} Band3: General frequencies: [937-1288] Additional frequencies: none ADD Band4: UCELLSETUP(Opti General onal) frequencies: ADD [1312-1513] UCELLQUICKSET Additional WRFDUP(Optional) frequencies: 010101
BSC6900
This parameter indicates whether to configure the UL frequency of the cell. TRUE indicates that the UL frequency need be reconfigured. FALSE indicates that the UL frequency need not be reconfigured. It is configured automatically based on the relationship between UL and DL frequencies. NULL indicates that the UL ADD frequency UEXT3GCELL(Opti remains WRFDonal) unchanged. 020203
BSC6900
Indicating whether the UL frequency of the cell need be configured. TRUE indicates that the UL frequency need be configured. FALSE indicates that the UL frequency need not be configured. It is configured automatically according to the relationship between UL and DL frequencies. For detailed information of this ADD parameter, UCELLSETUP(Opti refer to 3GPP WRFDonal) TS 25.433. 010101 This timer is started when an AAL2 signaling entity sends the peer node SET a request for AAL2TMR(Optional unblocking an WRFD) AAL2 path. 05030104
UDP multiplexing mode of the receiving party. The mode that does not support the function of compressing the RTP header indicates that the receiving party supports the UDP MUX RTP header but not the function of compressing the RTP header. The mode that supports the function of compressing the RTP header indicates that the receiving party supports both ADD the UDP IPMUX(Mandatory) MUX RTP
WRFD050420 WRFD050412
BSC6900
UDP multiplexing mode of the sending party. If the mode that does not support the function of compressing the RTP header indicates that the sending party supports the UDP MUX RTP header but not the function of compressing the RTP header. The mode that supports the function of compressing the RTP header indicates that the sending party supports both the UDP ADD MUX RTP IPMUX(Mandatory) header and
WRFD050420 WRFD050412
SET USMLC(Optional)
Switch for sending AGPS assistance data in UEassisted mode. This parameter specifies the GPS data to be sent.
WRFD020803
BSC6900
SET USMLC(Optional)
Switch for sending AGPS assistance data in UEbased mode. This parameter specifies the GPS data to WRFDbe sent. 020803
BSC6900
A timer used to wait UE SET capability USTATETIMER(Op enquiry WRFDtional) response . 010101 A timer to RNC wait for the response to counter SET check in USTATETIMER(Op security mode WRFDtional) procedure. 011402 Group to which the operator belongs. This parameter is used to limit the right of MRFDthe operator. 210305 Unit time for the error code ratio test None Upper limit for triggering an MRFDalarm 210304
UG
Operator Level
BSC6900
ADD OP(Optional)
UINTTIME
Unit time[ms]
BSC6900
UL
Upper Limit
BSC6900
UL activity factor of the R99 AMR conversationa l service. Signals might be discontinuous ly transmitted because of the activation detection of conversationa l service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation time. The activity factors of the same transport SET channel might UADMCTRL(Option be different in WRFDal) UL and DL. 020101
BSC6900
Duration when the measured value of AMR keeps fulfilling the 6A1 measurement condition before the event 6A1 is triggered. Event triggering is used for UL measurement . The event 6A1 is triggered when the measured value is greater than the absolute upper threshold 6A1. When the event 6A1 is triggered, ADD the AMR UCELLQUALITYM speech rate EAS(Optional) should be SET lowered. The UQUALITYMEAS(O measured WRFDptional) value is 020701
BSC6900
Duration when the measured value of AMR keeps fulfilling the 6A2 measurement condition before the event 6A2 is triggered. Event triggering is used for UL measurement . The event 6A2 is triggered when the measured value is greater than the absolute upper threshold 6A2. When the event 6A2 is triggered, ADD the AMR UCELLQUALITYM speech rate EAS(Optional) should be SET lowered. The UQUALITYMEAS(O measured WRFDptional) value is 020701
BSC6900
Duration when the measured value of AMR keeps fulfilling the 6B1 measurement condition before the event 6B1 is triggered. Event triggering is used for UL measurement . The event 6B1 is triggered when the measured value is lower than the absolute lower threshold 6B1. When the event 6B1 is triggered, ADD the AMR UCELLQUALITYM speech rate EAS(Optional) should be SET raised. The UQUALITYMEAS(O measured WRFDptional) value is 020701
BSC6900
Duration when the measured value of AMR keeps fulfilling the 6B2 measurement condition before the event 6B2 is triggered. Event triggering is used for UL measurement . The event 6B2 is triggered when the measured value is lower than the absolute lower threshold 6B2. When the event 6B2 is triggered, ADD the AMR UCELLQUALITYM speech rate EAS(Optional) should be SET raised. The UQUALITYMEAS(O measured WRFDptional) value is 020701
BSC6900
Duration when the measured value of AMR keeps fulfilling the 6D measurement condition before the event 6D is triggered. Event triggering is used for UL measurement . The event 6D is triggered when the measured value is greater than the absolute upper threshold 6D. When the event 6D is triggered, the ADD AMR speech UCELLQUALITYM rate should EAS(Optional) be lowered. SET The UQUALITYMEAS(O measured WRFDptional) value is 020701
UL activity factor of the R99 background service. Signals might be discontinuous ly transmitted because of the activation detection of conversationa l service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation time. The activity factors of the same transport SET channel might UADMCTRL(Option be different in WRFDal) UL and DL. 020101
L3 filtering coefficient. The larger the value of this parameter, the stronger the smoothing effect and the higher the anti-slowfading capability, but the lower the signal change tracing capability. For detailed information of this SET parameter, ULDM(Optional) refer to 3GPP SET TS 25.433. USATLDM(Optional Recommende WRFD) d value: D6 020102
BSC6900
This parameter specifies the rate threshold for the decision to set up a PS domain background/i nteractive service on the DCH in the uplink. Only when the UL service rate is higher than or equal to this threshold, or the DL service rate is higher than or equal to the downlink threshold, the service will be set up on DCH. Otherwise, the service is set up on CCH. According to SET the product UFRCCHLTYPEPA specifications WRFDRA(Optional) , only the 010202
BSC6900
This parameter specifies the rate threshold for the decision to set up a PS domain background/i nteractive service on the DCH in the uplink. Only when the UL service rate is higher than or equal to this threshold, or the DL service rate is higher than or equal to the downlink threshold, the service will be set up on DCH. Otherwise, the service is set up on CCH. According to ADD the product UCELLFRC(Option specifications WRFDal) , only the 010202
BSC6900
SET UFRC(Optional)
UL BE traffic Initial bit rate. When DCCC function is enabled, the uplink initial bit rate will be set to this value if the uplink max bit rate is higher than the initial bit rate.The larger this parameter to be set, the sooner max bit rate to be reached, but the bit rate is more likely to be declined when system congested, so it makes no sense to set this parameter too high. Contrarily,the smaller the parameter to be set, the more easily WRFDthe BE traffic 021101
BSC6900
BSC6900
This parameter specifies the rate threshold for decision to use E-DCH to carry UL PS domain background/i nteractive services. When the maximum UL service rate is higher than or equal to this threshold, the service will be carried on EDCH. SET Otherwise, it UFRCCHLTYPEPA will be carried RA(Optional) on DCH. Duration when the measured value of BE keeps fulfilling the 6A1 measurement condition before the event 6A1 is triggered. The trigger time is used to prevent the ADD sudden UCELLQUALITYM change of the EAS(Optional) measured SET value for UQUALITYMEAS(O being ptional) reported.
WRFD010612 WRFD01061206
WRFD021101
BSC6900
BSC6900
Duration when the measured value of BE keeps fulfilling the 6A2 measurement condition before the event 6A2 is triggered. The trigger time is used to prevent the ADD sudden UCELLQUALITYM change of the EAS(Optional) measured SET value for UQUALITYMEAS(O being ptional) reported. Duration when the measured value of BE keeps fulfilling the 6B1 measurement condition before the event 6B1 is triggered. The trigger time is used to prevent the ADD sudden UCELLQUALITYM change of the EAS(Optional) measured SET value for UQUALITYMEAS(O being ptional) reported.
WRFD021101
WRFD021101
BSC6900
BSC6900
Duration when the measured value of BE keeps fulfilling the 6B2 measurement condition before the event 6B2 is triggered. The trigger time is used to prevent the ADD sudden UCELLQUALITYM change of the EAS(Optional) measured SET value for UQUALITYMEAS(O being ptional) reported. Duration when the measured value of BE keeps fulfilling the 6D measurement condition before the event 6D is triggered. The trigger time is used to prevent the ADD sudden UCELLQUALITYM change of the EAS(Optional) measured SET value for UQUALITYMEAS(O being ptional) reported. SET ULDM(Optional) SET USATLDM(Optional ) Length of smoothing filter window of uplink CAC.
WRFD021101
WRFD021101
WRFD020102
The admission control decision is only for dedicated channels. For common channels, some resources instead of a special admission procedure are reserved. In the UL, according to the current load factor and the characteristic s of the new call, the UL CAC algorithm predicts the new traffic channels load factor with the assumption of admitting the ADD new call, then UCELLCAC(Option plus with the WRFDal) premeditated 020101 Admission threshold of total cell uplink power. This parameter is related to the ADD target load of UCELLCAC(Option the uplink WRFDal) schedule. 020101
BSC6900
UlCmMethod
This parameter specifies the compression method that the NodeB supports in the uplink. - SF/2: SF reduction by two HIGHER_LA YER_SCHDL: higher layer scheduling If both SF/2 and HIGHER_LA YER_SCHDL are selected, the NodeB supports both of the compression methods in the uplink.
WRFD020302 WRFD020303
BSC6900
Number of users selected in a UL LDR CS domain interRAT SHOULDBE load handover. The target subscribers of this parameter are the CS domain subscribers. Because the CS domain subscribers are session subscribers in general and they have little impact on load, you can set this parameter to ADD a UCELLLDR(Option comparatively WRFDal) high value. 020106
Number of users selected in a UL LDR CS domain interRAT SHOULDBE load handover. The target subscribers of this parameter are the CS domain subscribers. Because the CS domain subscribers are session subscribers in general and they have little impact on load, you can set this parameter to ADD a UNODEBLDR(Opti comparatively WRFDonal) high value. 020106
Number of users selected in a UL LDR CS domain interRAT SHOULDNO TBE load handover. The target subscribers of this parameter are the CS domain subscribers. Because the CS domain subscribers are session subscribers in general and they have little impact on load, you can set this parameter to ADD a UCELLLDR(Option comparatively WRFDal) high value. 020106
Number of users selected in a UL LDR CS domain interRAT SHOULDNO TBE load handover. The target subscribers of this parameter are the CS domain subscribers. Because the CS domain subscribers are session subscribers in general and they have little impact on load, you can set this parameter to ADD a UNODEBLDR(Opti comparatively WRFDonal) high value. 020106
BSC6900
SET UDCCC(Optional)
For a BE service that has a low maximum rate, the DCCC algorithm is not obviously effective yet it increases algorithm processing. Thus, the traffic-based DCCC algorithm is applied to BE services whose maximum UL rate is greater than the WRFDthreshold. 021101
UlFpMode
UL FP Mode
BSC6900
This parameter specifies the UL FP mode of this type of RAB. For details of normal mode and silent mode, refer to ADD section 5.1.1 UTYPRABBASIC(M of the 3GPP andatory) TS 25.427.
BSC6900
Maximum UL rate when coverage of the entire cell is ensured under certain load. For a BE service that has a low maximum rate, the DCCC algorithm is not obviously effective yet it increases algorithm processing. Thus, the coveragebased DCCC algorithm is applied to BE services ADD whose UCELLDCCC(Optio maximum UL nal) rate is greater SET than the WRFDUDCCC(Optional) threshold. 021101
UlGBR
BSC6900
This parameter specifies the uplink guaranteed bit rate (GBR) of the BE service. GBR is the minimum bit rate that the system can guarantee for the service after it accesses in. The GBR of none BE service is specified by SET the RAB UUSERGBR(Option assignment WRFDal) from the CN. 050424 Uplink Credit Reserved by Spread Factor for HandOver. SFOFF means that ADD none of them UCELLCAC(Option are reserved WRFDal) for handover. 020101
BSC6900
If the HSDPCCH carries ACK/NACK, the system will not perform CAC. If the HSDPCCH carries CQI, the system will perform CAC. This parameter refers to the resources reserved for the uplink HSDPCCH carrying ACK/NACK. The correspondin g threshold is the uplink limit capacity ADD multiplied by UCELLCAC(Option this WRFDal) parameter. 020101 This parameter specifies the E-DCH data transfer mode of IMS signalling services. It is valid only when IMS signalling services are mapped onto WRFDthe E-DCH. 010618
SET UFRC(Optional)
UlInteractAF
BSC6900
UL activity factor of the R99 interactive service. Signals might be discontinuous ly transmitted because of the activation detection of conversationa l service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation time. The activity factors of the same transport SET channel might UADMCTRL(Option be different in WRFDal) UL and DL. 020101
BSC6900
The UE can be selected to process load handover only when its ADD bandwidth is UCELLLDR(Option less than this WRFDal) threshold. 020106
BSC6900
The interfrequency neighboring cell could be selected as the destination of load handover only when its load remaining space is larger than this threshold. The lower the parameter is, the easier it is to find a qualified target cell for the blind handover. Excessively small value of the parameter, however makes the target cell easily enter the congestion ADD status. The UCELLLDR(Option higher the WRFDal) parameter is, 020106
BSC6900
The mechanism of the LDR is that an action is performed in each [LDR period] and some services are selected based on the action rules to perform this action. This parameter defines the maximum number of RABs selected in executing uplink LDRAMR voice service rate reduction. If the parameter value is too high, the LDR action may fluctuate greatly and over control ADD may occur UCELLLDR(Option (the state of WRFDal) basic 020106 SET ULDM(Optional) SET USATLDM(Optional ) Length of smoothing filter window of uplink LDR.
WRFD020102
BSC6900
Number of RABs selected in a UL LDR BE traffic rate reduction. In the actual system, this parameter can be set on the basis of the actual circumstance s. If the highrate subscribers occupy a high proportion, set the parameter to a comparatively low value. If the high-rate subscribers occupy a low proportion, set the parameter to a comparatively high value. ADD Because the UCELLLDR(Option basic WRFDal) congestion 020106
BSC6900
Number of RABs selected in a UL LDR BE traffic rate reduction. In the actual system, this parameter can be set on the basis of the actual circumstance s. If the highrate subscribers occupy a high proportion, set the parameter to a comparatively low value. If the high-rate subscribers occupy a low proportion, set the parameter to a comparatively high value. ADD Because the UNODEBLDR(Opti basic WRFDonal) congestion 020106
BSC6900
Reserved SF threshold in uplink credit LDR. The uplink credit LDR could be triggered only when the SF factor correspondin g to the uplink reserved credit is higher than the uplink or downlink ADD credit SF UCELLLDR(Option reserved WRFDal) threshold. 020106
BSC6900
Threshold of SF reserved in uplink credit LDR. The uplink credit LDR is triggered when the SF factor correspondin g to the uplink reserved credit is higher than the uplink or downlink credit SF reserved threshold. The lower the parameter value is, the easier the credit enters the congestion status, the easier the LDR action is triggered, and the easier the user ADD experience is UNODEBLDR(Opti affected. A WRFDonal) lower code 020106
BSC6900
This parameter has the same content as UlLdrFirstActi on. The selected actions, ADD however, UCELLLDR(Option should be WRFDal) unique. 020106
This parameter has the same content as UlLdrFirstActi on. The selected actions, ADD however, UCELLLDR(Option should be WRFDal) unique. 020106
This parameter has the same content as UlLdrFirstActi on. The selected actions, ADD however, UNODEBLDR(Opti should be WRFDonal) unique. 020106
NOACT: No load reshuffling action is taken. INTERFREQ LDHO: The interfrequency load handover is performed. BERATERED : Channels are reconfigured for the BE service. QOSRENEG O: The renegotiation on the QoS of the uncontrollable real-time service is performed. CSINTERRA TSHOULDBE LDHO: The inter-RAT SHOULDBE ADD load UCELLLDR(Option handover of WRFDal) the CS 020106
Value range: Enum{ NOACT (NO ACTION), BERATERED (BE TRAFF RATE REDUCTION ), QOSRENEG O (UNCONTRO LLED REALTIME TRAFF QOS RENEGOTIATIO N), CSINTERRA TSHOULDBE LDHO (CS DOMAIN INTER-RAT SHOULD BE LOAD HANDOVER) , PSINTERRA TSHOULDBE LDHO (PS DOMAIN INTER-RAT SHOULD BE ADD LOAD UNODEBLDR(Opti HANDOVER) WRFDonal) , 020106
BSC6900
This parameter has the same content as UlLdrFirstActi on. The selected actions, ADD however, UCELLLDR(Option should be WRFDal) unique. 020106
BSC6900
This parameter has the same content as UlLdrFirstActi on. The selected actions, ADD however, UNODEBLDR(Opti should be WRFDonal) unique. 020106
BSC6900
Number of RABs selected in a UL LDR uncontrolled real-time traffic QoS renegotiation. The target subscribers of this parameter are the PS domain realtime subscribers. The setting of this parameter is analogous to the setting of BE service rate reduction subscriber number. Because the number of subscribers performing QoS renegotiation may be ADD smaller than UCELLLDR(Option the value of WRFDal) this 020106
BSC6900
Number of RABs selected in a UL LDR uncontrolled real-time traffic QoS renegotiation. The target subscribers of this parameter are the PS domain realtime subscribers. The setting of this parameter is analogous to the setting of BE service rate reduction subscriber number. Because the number of subscribers performing QoS renegotiation may be ADD smaller than UNODEBLDR(Opti the value of WRFDonal) this 020106
UlLdrRelThd
BSC6900
If the ratio of UL load of the cell to the uplink capacity is lower than this threshold, the UL load reshuffling function of the cell is stopped. After the basic congestion state of the cell load is released, the system no longer implements the LDR action. Because the load fluctuates, the difference between the LDR release threshold and trigger threshold should be ADD higher than UCELLLDM(Option 10%. The WRFDal) ping-pong 020106
BSC6900
This parameter has the same content as UlLdrFirstActi on. The selected actions, ADD however, UCELLLDR(Option should be WRFDal) unique. 020106
BSC6900
This parameter has the same content as UlLdrFirstActi on. The selected actions, ADD however, UNODEBLDR(Opti should be WRFDonal) unique. 020106
BSC6900
This parameter has the same content as UlLdrFirstActi on. The selected actions, ADD however, UCELLLDR(Option should be WRFDal) unique. 020106
This parameter has the same content as UlLdrFirstActi on. The selected actions, ADD however, UCELLLDR(Option should be WRFDal) unique. 020106
BSC6900
This parameter has the same content as UlLdrFirstActi on. The selected actions, ADD however, UNODEBLDR(Opti should be WRFDonal) unique. 020106
This parameter has the same content as UlLdrFirstActi on. The selected actions, ADD however, UCELLLDR(Option should be WRFDal) unique. 020106
This parameter has the same content as UlLdrFirstActi on. The selected actions, ADD however, UNODEBLDR(Opti should be WRFDonal) unique. 020106
UlLdrTrigThd
BSC6900
If the ratio of UL load of the cell to the uplink capacity is not lower than this threshold, the UL load reshuffling function of the cell is triggered. After the basic congestion state of the cell load is released, the system no longer implements the LDR action. Because the load fluctuates, the difference between the LDR release threshold and trigger threshold ADD should be UCELLLDM(Option higher than WRFDal) 10%. The 020106
BSC6900
BSC6900
This parameter specifies the maximum number of TFCs (Transport Format Combination) allowed in the uplink. The larger the value of this parameter, the larger the number of ADD available UNODEBLMTPAR TFCs in the A(Optional) uplink. Smooth filtering coefficient for UL measured values. The smooth filtering algorithm is used to avoid random interference in measurement reporting. Smoothness ADD is decided by UCELLQUALITYM the filtering EAS(Optional) coefficient of SET the UQUALITYMEAS(O measurement ptional) .
WRFD010510
WRFD021101
SET UDCCC(Optional)
This parameter determines whether the uplink intermediate rate uses automatic or manual mode when using 3step WRFDadjustment. 021101
BSC6900
Threshold of the UL intermediate rate when the 3-step mode is used for UL rate adjustment and the manual mode is used for UL intermediate SET rate UDCCC(Mandatory) adjustment. To adjust the UL AMR speech rate, AMRC delivers the TFC CONTROL command and starts this timer. If no failure message is received when the timer expires, the adjustment of the UL AMR SET speech rate is UAMRC(Optional) successful.
WRFD021101
WRFD020701
BSC6900
To adjust the UL wideband AMR speech rate, AMRC delivers the TFC CONTROL command and starts this timer. If no failure message is received when the timer expires, the adjustment of the UL wideband SET AMR speech UAMRCWB(Option rate is WRFDal) successful. 020701
BSC6900
UL activity factor of the R99 non AMR conversationa l service. Signals might be discontinuous ly transmitted because of the activation detection of conversationa l service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation time. The activity factors of the same transport SET channel might UADMCTRL(Option be different in WRFDal) UL and DL. 020101
BSC6900
The percentage of the conversationa l non-AMR service threshold to the 100% uplink load. It is applicable to algorithm 1 and algorithm 2. The parameter is used for controlling the non-AMR service admission. That is, when a non-AMR service is accessing, the RNC evaluates the measurement value of the uplink load after the service is accessed. If the UL load of ADD a cell is UCELLCAC(Option higher than WRFDal) this threshold 020101
BSC6900
The percentage of the handover service admission threshold to the 100% uplink load. It is applicable to algorithm 1 and algorithm 2. The parameter is used for controlling the handover admission. That is, when a service is handing over to a cell, the RNC evaluates the measurement value of the uplink load after the service is accessed. If the UL load of a cell is higher than ADD this threshold UCELLCAC(Option after the WRFDal) access, this 020101
BSC6900
The percentage of the conversationa l non-AMR service threshold to the 100% uplink load. It is applicable to algorithm 1 and algorithm 2. The parameter is used for controlling the non-AMR service admission. That is, when a non-AMR service is accessing, the RNC evaluates the measurement value of the uplink load after the service is accessed. If the UL load of ADD a cell is UCELLCAC(Option higher than WRFDal) this threshold 020101
BSC6900
The percentage of other service thresholds to the 100% uplink load. The services refer to other admissions except the conversationa l AMR service, conversationa l non-AMR service, and handover scenarios. It is applicable to algorithm 1 and algorithm 2. The parameter is used for controlling other service admissions. That is, when a service is accessing, the RNC evaluates the ADD measurement UCELLCAC(Option value of the WRFDal) uplink load 020101 SET ULDM(Optional) SET USATLDM(Optional ) Length of smoothing filter window of uplink OLC.
WRFD020102
BSC6900
UL fast TF restriction refers to a situation where, when the cell is overloaded and congested, the uplink TF can be adjusted to restrict the number of blocks transported in each TTI at the MAC layer and the rate of user data, thus reducing the cell uplink load. The mechanism of the OLC is that an action is performed in each [OLC period] and some ADD services are UCELLOLC(Option selected WRFDal) based on the 020107
BSC6900
UL fast TF restriction refers to a situation where, when the cell is overloaded and congested, the uplink TF can be adjusted to restrict the number of blocks transported in each TTI at the MAC layer and the rate of user data, thus reducing the cell uplink load. The mechanism of the OLC is that an action is performed in each [OLC period] and some ADD services are UCELLOLC(Option selected WRFDal) based on the 020107
L3 filtering coefficient. The larger the value of this parameter, the stronger the smoothing effect and the higher the anti-slowfading capability, but the lower the signal change tracing capability. For detailed SET information of ULDM(Optional) this SET parameter, USATLDM(Optional refer to 3GPP WRFD) TS 25.433. 020102
UlOlcRelThd
BSC6900
If the ratio of UL load of the cell to the uplink capacity is lower than this threshold, the UL overload and congestion control function of the cell is stopped. The value of the OLC release threshold should not be much lower than or close to the OLC trigger threshold, or the system state may have a pingpong effect. The recommende d difference between the OLC release ADD threshold and UCELLLDM(Option the OLC WRFDal) trigger 020107
BSC6900
User release is an extreme method in reducing the cell load and recovering the system when the cell is overloaded and congested. The mechanism of the OLC is that an action is performed in each [OLC period] and some services are selected based on the action rules to perform this action. This parameter defines the maximum number of RABs released in executing ADD uplink OLC UCELLOLC(Option service WRFDal) release. 020107 UL OLC trigger hysteresis.Thi SET s parameter ULDM(Optional) can avoid SET touching off USATLDM(Optional OLC event WRFD) continually. 020102
BSC6900
BSC6900
If the ratio of UL load of the cell to the uplink capacity is not lower than this threshold, the UL overload and congestion control function of the cell is triggered. The value of the OLC release threshold should not be much lower than or close to the OLC trigger threshold, or the system state may have a pingpong effect. The recommende d difference between the ADD OLC release UCELLLDM(Option threshold and WRFDal) the OLC 020107
BSC6900
Number of users selected in a UL LDR PS domain interRAT SHOULDBE load handover. The target subscribers of this parameter are the PS domain subscribers. In the actual system, this parameter can be set on the basis of the actual circumstance s. If the highrate subscribers occupy a high proportion, set the parameter to a comparatively ADD low value. If UCELLLDR(Option the high-rate WRFDal) subscribers 020106
Number of users selected in a UL LDR PS domain interRAT SHOULDBE load handover. The target subscribers of this parameter are the PS domain subscribers. In the actual system, this parameter can be set on the basis of the actual circumstance s. If the highrate subscribers occupy a high proportion, set the parameter to a comparatively ADD low value. If UNODEBLDR(Opti the high-rate WRFDonal) subscribers 020106
Number of users selected in a UL LDR PS domain interRAT SHOULDNO TBE load handover. The target subscribers of this parameter are the PS domain subscribers. In the actual system, this parameter can be set on the basis of the actual circumstance s. If the highrate subscribers occupy a high proportion, set the parameter to a comparatively ADD low value. If UCELLLDR(Option the high-rate WRFDal) subscribers 020106
Number of users selected in a UL LDR PS domain interRAT SHOULDNO TBE load handover. The target subscribers of this parameter are the PS domain subscribers. In the actual system, this parameter can be set on the basis of the actual circumstance s. If the highrate subscribers occupy a high proportion, set the parameter to a comparatively ADD low value. If UNODEBLDR(Opti the high-rate WRFDonal) subscribers 020106 Rate adjustment switch of link stability control for UL QoS of AMR services. When the parameter is set to YES, UL rate of SET AMR services UQOSACT(Optiona can be l) adjusted.
BSC6900
WRFD020701 WRFD020309
BSC6900
Interfrequency handover switch of link stability control for UL QoS of AMR services. When the parameter is set to YES, interfrequency handover can be performed for AMR SET services to UQOSACT(Optiona ensure the l) QoS. Inter-RAT handover switch of link stability control for UL QoS of AMR services. When the parameter is set to YES, inter-RAT handover can be performed for AMR SET services to UQOSACT(Optiona ensure the l) QoS.
WRFD020701 WRFD020309
WRFD020701 WRFD020309
BSC6900
Timer length for uplink Qos measurement . This parameter controls the time lengths for the interfrequency and inter-RAT measurement based on Qos. After interfrequency or inter-RAT measurement starts, if no interfrequency handover is performed when this timer expires, the measurement is stopped, and the compressed SET mode is UQOSHO(Optional) deactivated, if ADD any. If this UCELLQOSHO(Opt parameter is ional) set to 0, this
WRFD020304 WRFD020309
BSC6900
Interfrequency handover switch of link stability control for UL QoS of VP services. When the parameter is set to YES, interfrequency handover can be performed for VP SET services to UQOSACT(Optiona ensure the WRFDl) QoS. 020304 Rate adjustment switch of link stability control for UL QoS of WAMR services. When the parameter is set to YES, UL rate of SET WAMR UQOSACT(Optiona services can l) be adjusted.
BSC6900
WRFD020701 WRFD020309
BSC6900
Interfrequency handover switch of link stability control for UL QoS of WAMR services. When the parameter is set to YES, interfrequency handover can be performed for WAMR SET services to UQOSACT(Optiona ensure the l) QoS. Inter-RAT handover switch of link stability control for UL QoS of WAMR services. When the parameter is set to YES, inter-RAT handover can be performed for WAMR SET services to UQOSACT(Optiona ensure the l) QoS.
WRFD020701 WRFD020309
WRFD020701 WRFD020309
BSC6900
SET UDCCC(Optional)
This parameter determines whether the UL rate is lowered to the minimum rate in one step or two steps for BE service set up on DCH in WRFDuplink. 021101 This parameter determines whether the UL rate is raised to the maximum rate in one step or two steps for BE service set up on DCH in WRFDuplink. 021101
BSC6900
SET UDCCC(Optional)
UlSFTurnPoin t UL SF threshold
BSC6900
CM implementatio n approach selection basis. When the uplink spreading factor is greater than or equal to this parameter value, the SF/2 approach will be preferred. Otherwise, the high layer scheduling will be preferred. The SF/2 approach consumes more system resources and therefore this approach is recommende SET d only for lowUCMCF(Optional) rate users. ADD The highUCELLCMCF(Optio layer nal) scheduling
WRFD020303 WRFD020302
UlSrbActFacto r UL AF of SRB
BSC6900
UL activity factor of SRB.Signals might be discontinuous ly transmitted because of the activation detection of conversationa l service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation time. The activity factors of the same transport SET channel might UADMCTRL(Option be different in WRFDal) UL and DL. 020101 This parameter specifies the E-DCH data transfer mode of SRB services. It is valid only when SRB services are mapped onto WRFDthe E-DCH. 010636
BSC6900
SET UFRC(Optional)
UlStreamAF
BSC6900
UL activity factor of the R99 streaming service. Signals might be discontinuous ly transmitted because of the activation detection of conversationa l service and source changes of data service. The activity factor is defined as the ratio of signal transmission time to channel occupation time. The activity factors of the same transport SET channel might UADMCTRL(Option be different in WRFDal) UL and DL. 020101
This parameter specifies the rate threshold for decision to use E-DCH to carry UL PS domain streaming services. When the maximum UL service rate is higher than or equal to this threshold, the service will be carried on EDCH. SET Otherwise, it UFRCCHLTYPEPA will be carried RA(Optional) on DCH.
WRFD010612 WRFD010632
SET UFRC(Optional)
This parameter specifies the E-DCH data transfer mode of streaming services. It is valid only when streaming services are mapped onto WRFDthe E-DCH. 010632
UlThd6A1
BSC6900
Measurement reporting threshold for triggering event 6A1. The event reporting mode is used. Event 6A1 is triggered when the measured value is higher than the absolute threshold 6A1. This event can trigger UL QoS operation. This parameter specifies a relative threshold. Absolute threshold of 6A1 = Max Ul Tx Power ADD Relative UTYPRABQUALIT threshold of YMEAS(Mandatory) 6A1.
UlThd6A2
BSC6900
Measurement reporting threshold for triggering event 6A2. The event reporting mode is used. Event 6A2 is triggered when the measured value is higher than the absolute threshold 6A2. When this event report is received, UL rate of AMR or BE services cannot be raised. This parameter specifies a relative threshold. Absolute threshold of 6A2 = Max Ul ADD Tx Power UTYPRABQUALIT Relative YMEAS(Mandatory) threshold of
UlThd6B1
BSC6900
Measurement reporting threshold for triggering event 6B1. The event reporting mode is used. Event 6B1 is triggered when the measured value is lower than the absolute threshold 6B1. When this event report is received, UL QoS operation is stopped. This parameter specifies a relative threshold. Absolute threshold of 6B1 = Max Ul Tx Power ADD Relative UTYPRABQUALIT threshold of YMEAS(Mandatory) 6B1.
UlThd6B2
BSC6900
Measurement reporting threshold for triggering event 6B2. The event reporting mode is used. Event 6B2 is triggered when the measured value is lower than the absolute threshold 6B2. When this event report is received, UL rate of AMR or BE services can be raised. This parameter specifies a relative threshold. Absolute threshold of 6B2 = Max Ul ADD Tx Power UTYPRABQUALIT Relative YMEAS(Mandatory) threshold of
BSC6900
When the algorithm 2 is used, this parameter defines the total equivalent user numbers correspondin g to the 100% uplink load. The parameter should be related to the admission threshold and ADD actual UCELLCAC(Option condition of WRFDal) the network. 020101 This parameter specifies the step size of the closedloop power control performed on UL DPCH. For details of this parameter, refer to the 3GPP TS WRFD25.214. 020504
BSC6900
SET UFRC(Optional)
BSC6900
BSC6900
Duration when the measured value of VP keeps fulfilling the 6A1 measurement condition before the event 6A1 is triggered. The trigger time is used to prevent the ADD sudden UCELLQUALITYM change of the EAS(Optional) measured SET value for UQUALITYMEAS(O being ptional) reported. Duration when the measured value of VP keeps fulfilling the 6B1 measurement condition before the event 6B1 is triggered. The trigger time is used to prevent the ADD sudden UCELLQUALITYM change of the EAS(Optional) measured SET value for UQUALITYMEAS(O being ptional) reported.
WRFD020304
WRFD020304
BSC6900
Duration when the measured value of VP keeps fulfilling the 6D measurement condition before the event 6D is triggered. The trigger time is used to prevent the ADD sudden UCELLQUALITYM change of the EAS(Optional) measured SET value for UQUALITYMEAS(O being WRFDptional) reported. 020304
UNBA
Support Balance
BSC6900
SET E1T1(Optional)
Whether to support the balanced mode or the unbalanced mode. When this parameter is set to YES, you can set the DIP switches on the interface boards. You do not need to set the DIP switches by turning them inwards or outwards. In this case, an interface board can be made to work in E1_UNBA, E1_BA, or T1 mode. When this parameter is set to NO, you cannot set the DIP switches on the interface WRFDboards. You 05030101
BSC6900
Estimated altitude of an uncertain area in the cell center in the WGS-84 coordinates. This is controlled by MTRLGY and ADD valid when USMLCCELL(Optio MET~0(metri WRFDnal) c system). 020801
BSC6900
This parameter specifies the estimated altitude of an uncertain area in the cell center in the WGS-84 coordinates. This is controlled by MTRLGY and valid when ADD IMP~1(British USMLCCELL(Optio measurement WRFDnal) ). 020801 Length of the semi-major axis of an uncertain area in the cell center. This is controlled by MTRLGY and ADD valid when USMLCCELL(Optio MET~0(metri WRFDnal) c system). 020801 This parameter specifies the length of the semi-major axis of an uncertain area in the cell center. This is controlled by MTRLGY and valid when ADD IMP~1(British USMLCCELL(Optio measurement WRFDnal) ). 020801
BSC6900
BSC6900
BSC6900
Length of the semi-minor axis of an uncertain area in the cell center. This is controlled by MTRLGY and ADD valid when USMLCCELL(Optio MET~0(metri WRFDnal) c system). 020801 This parameter specifies the length of the semi-minor axis of an uncertain area in the cell center. This is controlled by MTRLGY and valid when ADD IMP~1(British USMLCCELL(Optio measurement WRFDnal) ). 020801
BSC6900
UNILNKN
BSC6900
WRFD050105
BSC6900
This parameter specifies the coefficient of the maximum duration of each counting. The maximum duration is MCCH modification period SET multiplied by URNCMBMSPARA( this WRFDOptional) parameter. 010660
UPPERANI
Upper Ani
BSC6900
Whether to indicate it is the upper level adjacent node when ADD "Is Root ADJNODE(Mandat Node" is set WRFDory) to No. 05030104 Upper class transport resource group No. It is valid only when " Is First Class Transport ADD Resource RSCGRP(Mandator Group " is set WRFDy) to NO. 050406 ADD Upper IPLOGICPORT(Opt number of the ional) logical port None
UPPERLP
BSC6900
UPPERVP
BSC6900
URA1
URA ID 1
BSC6900
A cell can belongs to multiple URAs. This parameter indicates the ID of the first URA that the cell belongs to. The URA is used only by the UTRAN and not known by the CN. When the UE is in the URA_PCH state, the location of the UE is identified by the URA. For detailed information about this parameter, refer to 3GPP WRFDTS 25.331. 010101
URA2
URA ID 2
BSC6900
A cell can belongs to multiple URAs. This parameter indicates the ID of the second URA that the cell belongs to. The URA is used only by the UTRAN and not known by the CN. When the UE is in the URA_PCH state, the location of the UE is identified by the URA. For detailed information about this parameter, refer to 3GPP WRFDTS 25.331. 010101
URA3
URA ID 3
BSC6900
A cell can belongs to multiple URAs. This parameter indicates the ID of the third URA that the cell belongs to. The URA is used only by the UTRAN and not known by the CN. When the UE is in the URA_PCH state, the location of the UE is identified by the URA. For detailed information about this parameter, refer to 3GPP WRFDTS 25.331. 010101
URA4
URA ID 4
BSC6900
A cell can belongs to multiple URAs. This parameter indicates the ID of the fourth URA that the cell belongs to. The URA is used only by the UTRAN and not known by the CN. When the UE is in the URA_PCH state, the location of the UE is identified by the URA. For detailed information about this parameter, refer to 3GPP WRFDTS 25.331. 010101
URA5
URA ID 5
BSC6900
A cell can belongs to multiple URAs. This parameter indicates the ID of the fifth URA that the cell belongs to. The URA is used only by the UTRAN and not known by the CN. When the UE is in the URA_PCH state, the location of the UE is identified by the URA. For detailed information about this parameter, refer to 3GPP WRFDTS 25.331. 010101
URA6
URA ID 6
BSC6900
A cell can belongs to multiple URAs. This parameter indicates the ID of the sixth URA that the cell belongs to. The URA is used only by the UTRAN and not known by the CN. When the UE is in the URA_PCH state, the location of the UE is identified by the URA. For detailed information about this parameter, refer to 3GPP WRFDTS 25.331. 010101
URA7
URA ID 7
BSC6900
A cell can belongs to multiple URAs. This parameter indicates the ID of the seventh URA that the cell belongs to. The URA is used only by the UTRAN and not known by the CN. When the UE is in the URA_PCH state, the location of the UE is identified by the URA. For detailed information about this parameter, refer to 3GPP WRFDTS 25.331. 010101
URA8
URA ID 8
BSC6900
A cell can belongs to multiple URAs. This parameter indicates the ID of the eighth URA that the cell belongs to. The URA is used only by the UTRAN and not known by the CN. When the UE is in the URA_PCH state, the location of the UE is identified by the URA. For detailed information about this parameter, refer to 3GPP WRFDTS 25.331. 010101 WRFD010901 WRFD010902
URAId
URA ID
BSC6900
URAId
URA ID
BSC6900
Identity of the UTRAN registration area. The URA is only used by the UTRAN and the CN does not know the URA. The URA consists of multiple cells. When the UE enters the URA-PCH state, the location of the UE is identified with the URA ID. ADD For details, UCELLURA(Manda refer to the tory) 3GPP TS ADD 25.331 WRFDUURA(Mandatory) protocol. 010101 Number of UTRAN Registration Areas (URAs) which the cell WRFDbelongs to. 010101
URANUM
URA number
BSC6900
Threshold of used frequency quality for triggering interfrequency measurement with measurement quantity of Ec/No for CS domain services. For CS domain services, if the value of [Interfrequency measure report mode] is set to EVENT_TRI GGER, this parameter is used to set the measurement SET control of UINTERFREQHOC event 2B. OV(Optional) One of the ADD necessary UCELLINTERFRE conditions WRFDQHOCOV(Optional) can be met 020302
Threshold of used frequency quality for triggering inter-RAT measurement with measurement quantity of Ec/No for CS domain services. For CS domain services, when Ec/No is used as the measurement quantity for inter-RAT measurement and the value of [Inter-RAT report mode] is EVENT_TRI GGER, this parameter is SET used to set UINTERRATHOCO measurement V(Optional) control on the ADD event 3A. The UCELLINTERRATH event 3A is WRFDOCOV(Optional) triggered, 020303
Threshold of used frequency quality for triggering interfrequency measurement with measurement quantity of RSCP for CS domain services. For CS domain services, if the value of [Interfrequency measure report mode] is set to EVENT_TRI GGER, this parameter is used to set the measurement SET control of UINTERFREQHOC event 2B. OV(Optional) One of the ADD necessary UCELLINTERFRE conditions WRFDQHOCOV(Optional) can be met 020302
Threshold of used frequency quality for triggering inter-RAT measurement with measurement quantity of RSCP for CS domain services. For CS domain services, when RSCP is used as the measurement quantity for inter-RAT measurement and the value of [Inter-RAT report mode] is EVENT_TRI GGER, this parameter is SET used to set UINTERRATHOCO measurement V(Optional) control on the ADD event 3A. The UCELLINTERRATH event 3A is WRFDOCOV(Optional) triggered, 020303
BSC6900
Threshold of used frequency quality for triggering interfrequency measurement with measurement quantity of Ec/No for PS domain HSPA services. For HSPA services, if the value of [Interfrequency measure report mode] is set to EVENT_TRI GGER, this parameter is used to set the measurement SET control of UINTERFREQHOC event 2B. OV(Optional) One of the ADD necessary UCELLINTERFRE conditions WRFDQHOCOV(Optional) can be met 020302
BSC6900
Threshold of used frequency quality for triggering inter-RAT measurement with measurement quantity of Ec/No for HSDPA services. For HSDPA services, when Ec/No is used as the measurement quantity for inter-RAT measurement and the value of [Inter-RAT report mode] is EVENT_TRI GGER, this parameter is used to set SET measurement UINTERRATHOCO control on the V(Optional) event 3A. The ADD event 3A is UCELLINTERRATH triggered, WRFDOCOV(Optional) when the 020303
BSC6900
Threshold of used frequency quality for triggering interfrequency measurement with measurement quantity of RSCP for PS domain HSPA services. For HSPA services, if the value of [Interfrequency measure report mode] is set to EVENT_TRI GGER, this parameter is used to set the measurement SET control of UINTERFREQHOC event 2B. OV(Optional) One of the ADD necessary UCELLINTERFRE conditions WRFDQHOCOV(Optional) can be met 020302
BSC6900
Threshold of used frequency quality for triggering inter-RAT measurement with measurement quantity of RSCP for HSDPA services. For HSDPA services, when RSCP is used as the measurement quantity for inter-RAT measurement and the value of [Inter-RAT report mode] is EVENT_TRI GGER, this parameter is used to set SET measurement UINTERRATHOCO control on the V(Optional) event 3A. The ADD event 3A is UCELLINTERRATH triggered, WRFDOCOV(Optional) when the 020303
BSC6900
This parameter configures the used frequency measurement quantity to trigger the inter-RAT measurement for the purpose of Qos-based handover. The parameter is valid when the event reporting mode is selected for inter-RAT. Ec/No: signalto-noise ratio RSCP: received signal code power CPICH_Ec/N O: the SET measurement UQOSHO(Optional) quantity used ADD for event 2D UCELLQOSHO(Opt and 2F, with WRFDional) unit of dB 020309
BSC6900
Threshold of used frequency quality for triggering interfrequency measurement with measurement quantity of Ec/No for PS domain nonHSPA services. For PS domain nonHSPA services, if the value of [Interfrequency measure report mode] is set to EVENT_TRI GGER, this parameter is used to set SET the UINTERFREQHOC measurement OV(Optional) control of ADD event 2B. UCELLINTERFRE One of the WRFDQHOCOV(Optional) necessary 020302
BSC6900
Threshold of used frequency quality for triggering inter-RAT measurement with measurement quantity of Ec/No for PS domain nonHSDPA services. For PS domain nonHSDPA services, when Ec/No is used as the measurement quantity for inter-RAT measurement and the value of [Inter-RAT report mode] is EVENT_TRI SET GGER, this UINTERRATHOCO parameter is V(Optional) used to set ADD measurement UCELLINTERRATH control on the WRFDOCOV(Optional) event 3A. The 020303
BSC6900
Threshold of used frequency quality for triggering interfrequency measurement with measurement quantity of RSCP for PS domain nonHSPA services. For PS domain nonHSPA services, if the value of [Interfrequency measure report mode] is set to EVENT_TRI GGER, this parameter is used to set SET the UINTERFREQHOC measurement OV(Optional) control of ADD event 2B. UCELLINTERFRE One of the WRFDQHOCOV(Optional) necessary 020302
BSC6900
Threshold of used frequency quality for triggering interfrequency measurement with measurement quantity of RSCP for PS domain nonHSDPA services. For PS domain nonHSDPA services, when RSCP is used as the measurement quantity for inter-RAT measurement and the value of [Inter-RAT report mode] is SET EVENT_TRI UINTERRATHOCO GGER, this V(Optional) parameter is ADD used to set UCELLINTERRATH measurement WRFDOCOV(Optional) control on the 020303
UseMacehs
BSC6900
This parameter specifies whether the Mac-ehs entity is applied. Macehs is enhanced Mac-hs and is used for DL L2 enhancement function. If the DL L2 enhancement is configured, the Mac-ehs entity will be applied, otherwise the SET Mac-ehs UHSSCCHLESSOP entity will not WRFDPARA(Mandatory) be applied. 010687
USENBLB2
BSC6900
Whether NodeB used ADD the electronic UNODEBESN(Opti serial number WRFDonal) 2 031101 ADD UEXT3GCELL(Opti onal) ADD UEXT2GCELL(Opti onal) WRFD021200 WRFD010801 WRFD010802 WRFD010801 WRFD010802 WRFD021200
UseOfHcs
Use of HCS
BSC6900
UseOfHcs
Use of HCS
BSC6900
Indicating whether HCS is used. For ADD details, refer UCELLHCS(Option to 3GPP TS al) 25.304.
UserPercenta ge UserPercentage
BSC6900
The ratio of the users which could launch the handover to inter-RAT neighbour cell. When the parameter is ALL_USER, it means all of the users could be handover to the inter-RAT neighbour cell. When the parameter is HALF, it means only 1/2 of the users could be handover to the interRAT neighbour cell. When the parameter is THIRD, it means only 1/3 of the ADD users could UCELLMBDRINTE be handover WRFDRRAT(Optional) to the inter020303 Percentage of SET User Plane UUSERPLNSHARE Sharing Out WRFDPARA(Optional) Offset 040100 Percentage of SET User Plane UUSERPLNSHARE Sharing Out WRFDPARA(Optional) threshold 040100
Percentage of User UserPlnSharin Plane Sharing Out gOutOffset Offset BSC6900 Percentage of User UserPlnSharin Plane Sharing Out gOutThd threshold BSC6900
UserPriority
User Priority
BSC6900
This parameter specifies the user priority which is defined according to the ARP(Allocatio n/Retention Priority) from the RAB assignment. The user classes in descending order of priority are Gold, Silver, and then Copper. Please refer to the SET UUSERPRIO RITY MML command to SET see how the USCHEDULEPRIO user priority is WRFDMAP(Mandatory) defined. 050424
UserPriority
User Priority
BSC6900
This parameter specifies the user priority which is defined according to the ARP(Allocatio n/Retention Priority) from the RAB assignment. The user classes in descending order of priority are Gold, Silver, and then Copper. Please refer to the SET UUSERPRIO RITY MML command to SET see how the UUSERGBR(Mand user priority is WRFDatory) defined. 050424
UserPriority
User Priority
BSC6900
This parameter specifies the user priority which is defined according to the ARP(Allocatio n/Retention Priority) from the RAB assignment. The user classes in descending order of priority are Gold, Silver, and then Copper. Please refer to the SET UUSERPRIO RITY MML command to SET see how the UFACHBANDWIDT user priority is WRFDH(Mandatory) defined. 010688
UserPriority
User Priority
BSC6900
This parameter specifies the user priority which is defined according to the ARP(Allocatio n/Retention Priority) from the RAB assignment. The user classes in descending order of priority are Gold, Silver, and then Copper. Please refer to the SET UUSERPRIO RITY MML command to SET see how the UUSERHAPPYBR( user priority is WRFDMandatory) defined. 050424 DLD LICENSE(Mandator y) ULD User name of LICENSE(Mandator the FTP MRFDy) server 210403
USR
UT
Rate unit
BSC6900
VCI
Bearing VCI
BSC6900
WRFDADD VCI of the 050301 AAL2PATH(Mandat AAL2 path WRFDory) out BSC6900 050404 If the parameter is set to Disable, the added IP path is not configured with the VLAN ID. If the parameter is set to Enable, the added IP path is configured with the VLAN ID.
VLANFlAG
VLANID Flag
BSC6900
VLANFLAG
VLANFLAG1
Vlan Flag VLANID Flag of First Local IP address VLANID Flag of Second Local IP address
BSC6900
BSC6900
Specified Vlan enabling flag None VLANID flag of first local IP address None
VLANFlAG2
BSC6900
VLANID
VLAN ID.
BSC6900
VLANID
VLAN ID
BSC6900
VLANID1
BSC6900
None
VLANID2
VLANPRI
VLAN Priority
BSC6900
VOICEDL
BSC6900
WRFD050406
WRFD050406
AMR voice primary path load threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment ADD of the AMR WRFDLOADEQ(Optional) voice service. 050404
BSC6900
WRFD050406
BSC6900
AMR voice primary secondary path load ratio threshold. It is one condition for selecting the primary path or secondary path in the case of the establishment ADD of the AMR WRFDLOADEQ(Optional) voice service. 050404
VOICEUL
WCDMA ADD AMR voice TRMFACTOR(Opti service uplink WRFDonal) factor 050406
VoipChlType
BSC6900
This parameter specifies the channel type of VoIP services. - DCH: Both uplink and downlink are preferably carried on DCH. - HSDPA: Uplink is preferably carried on DCH, and downlink is preferably carried on HSDSCH. - HSPA: Uplink is preferably carried on EDCH, and downlink is SET preferably UFRCCHLTYPEPA carried on HS- WRFDRA(Optional) DSCH. 010617 This parameter decides EDCH TTI type for VOIP WRFDtraffic. 010617 24V voltage alarm switch MRFD210304
HSUPA TTI type of VoipHsupaTti VOIP traffic BSC6900 Enable Alarm Reporting for 24V VOL24_MASK Power BSC6900 Upper Limit of VOL24_THD_ Alarm for 24V HIGH Power Lower Limit of VOL24_THD_ Alarm for 24V LOW Power
BSC6900
ADD EMU(Optional)
Upper limit for triggering a 24 V voltage MRFDsensor alarm 210304 Lower limit for triggering a 24 V voltage MRFDsensor alarm 210304
BSC6900
ADD EMU(Optional)
Enable Alarm Reporting for 48V VOL48_MASK Power Upper Limit of VOL48_THD_ Alarm for 48V HIGH Power Lower Limit of VOL48_THD_ Alarm for 48V LOW Power
BSC6900
ADD EMU(Optional)
MRFD210304
BSC6900
ADD EMU(Optional)
Upper limit for triggering a 48V voltage MRFDsensor alarm 210304 Lower limit for triggering a 48V voltage MRFDsensor alarm 210304
BSC6900
ADD EMU(Optional)
VPCLCXN
BSC6900
None
VPI
Bearing VPI
BSC6900
WRFD05030104 WRFDADD VPI of the 05030106 AAL2PATH(Mandat AAL2 path WRFDory) out BSC6900 050301 Meaning: Indicates whether the videophone (VP) service is limited in a cell. When the indicator is "TRUE", it indicates that the VP ADD service is UEXT3GCELL(Opti limited in the WRFDonal) cell. 020203
VPLimitInd
VPLimitInd
BSC6900
VPLimitInd
BSC6900
This switch defines whether a video phone is barred in a cell. If a video phone is allowed in a confidential zone such as a military exclusive zone, the phone can be used for shoot in the confidential zone. Therefore, the operator ADD can reject UCELLSETUP(Opti video phone onal) services in ADD the cell by UCELLQUICKSET enabling the WRFDUP(Optional) switch. 020307
When the parameter is set to YES, the QOS control algorithm is used for VP services. When the parameter is set to NO, the QOS control algorithm is not used for VP services.The QOS action of VP services only SET includes inter UQOSACT(Optiona frequency WRFDl) handover. 020304
BSC6900
Threshold of VP call drop ratio per CPUS to report KPI alarm.In a checking period, if the ratio is higher than this threshold and the number of VP call release is higher than the related threshold, the KPI alarm of SET VP call drop UKPIALMTHD(Opti ratio is WRFDonal) reported. 010510
VpRabEstAtt MinNum
BSC6900
The minimum number of VP RAB establish request per CPUS to report KPI alarm. In a checking period,if the number of VP RAB establish request is higher than the threshold and the VP RAB setup successful ratio is lower than this threshold,the KPI alarm of SET VP RAB UKPIALMTHD(Opti setup ratio is WRFDonal) reported. 010510
Threshold of VP RAB setup successful ratio per CPUS to report KPI alarm. In a checking period,if the ratio is lower than this threshold and the number of VP RAB establish request is higher than the related threshold,the KPI alarm of SET VP RAB UKPIALMTHD(Opti setup ratio is WRFDonal) reported. 010510
The minimum number of VP call release per CPUS to report KPI alarm.In a checking period, if the number of VP call release is higher than the related threshold and the VP call drop ratio is higher than this threshold, the KPI alarm SET of VP call UKPIALMTHD(Opti drop ratio is WRFDonal) reported. 010510
BSC6900 BSC6900
Timer for triggering a second adjustment of the UL WAMR mode. This parameter specifies the duration of waiting for the voice quality enhanced acknowledge ment after the UL WAMR mode adjustment when the associated command is delivered. The UL WAMR rate adjust timer starts when AMRC mode adjustment procedure is triggered, and stops when the next SET measurement UQOSACT(Optiona report is l) received. If ADD Water sensor EMU(Optional) alarm switch
WEEK
Week Limit
BSC6900
ADD OP(Optional)
Whether to limit the operation weekday of the operator. If the weekday needs to be limited, see the description of MRFD"Week". 210305
Weight
Weighted factor
BSC6900
This parameter is used to determine the relative threshold of the soft handover based on the measurement of each cell in the active set. The larger the value of the parameter is, the higher the relative threshold is under the same conditions. When Weight is set to 0, the SHO relative threshold depends on only the best cell of the active set. SET For the UINTRAFREQHO( definition, Optional) refer to 3GPP ADD TS 25.331. UCELLINTRAFRE When the QHO(Optional) parameter
WRFD020202 WRFD020203
BSC6900
Weight used for computing frequency general quality. The larger the value of this parameter, the higher the calculated general quality of the active set. When this parameter is set to 0, the general quality of the active set is the quality of the best cell in the active set. For details about this parameter, refer to the subsection of frequency SET quality UINTERFREQHOC estimation in OV(Optional) the section of ADD interUCELLINTERFRE frequency WRFDQHOCOV(Optional) measurement 020302
BSC6900
Weight used for computing frequency general quality. The larger the value of this parameter, the higher the estimated general quality of the current frequency in the same condition, and the more difficult the triggering of the inter-RAT handover; Reversely, the smaller the value of this parameter, the lower the estimated general SET quality of the UINTERRATHOCO current V(Optional) frequency, ADD and the UCELLINTERRATH easier the WRFDOCOV(Optional) triggering of 020303
BSC6900
STR IPCHK(Optional)
Whether to trigger an active/standb y port switchover. If this parameter is set to YES, an active/standb y port switchover is triggered when a fault is detected on the active port. If this parameter is set to NO, an active/standb y port switchover is not triggered when a fault is detected on the active WRFDport. 050421
BSC6900
Receiving window size. It controls the transmit ADD speed of the WRFDSAALLNK(Optional) peer. 050301
WK
Week
BSC6900
ADD OP(Mandatory)
MRFD210305
WKMODE
Work mode
BSC6900
ADD M3LKS(Optional)
Working mode of the M3UA link set, including M3UA_ASP and M3UA_IPSP. For details about the ASP and IPSP, see the WRFDRFC4666. 050409 Flag of the work area to be formatted Working mode. E1: The E1 system is recommende d by the IUTT. E1 carries signals at 2.048 Mbit/s. G.703 defines the electrical specification and G.704 defines the frame format for E1 telecommunic ation lines. The E1 system is used in Europe and China. T1: The T1 system is recommende d by the ANSI and widely used in the North America. T1 carries signals at 1.544 Mbit/s. E1_BA: A
BSC6900
FMT DATA(Optional)
MRFD210301
BSC6900
SET E1T1(Optional)
WRFD05030101
WORKTYPE
Work Type
BSC6900
Optical interface type. Value UNI indicates that the interface is a user network interface. Value NNI indicates that the interface is a networknetwork interface. Generally, this parameter is set to UNI. This parameter is set to NNI when the BSC is connected to the core SET OPT(Optional) network. None
WTRT
WTR Time[Sec]
BSC6900
None
XOffset
X Offset
BSC6900
This parameter specifies the X offset for connected mode. For a PTM service in a cell, X UEs that receive this service need to retain in connected mode, so as to reduce triggering of counting on the Uu interface during recounting. The value of X= SET "NCountingTh URNCMBMSPARA( d" + " WRFDOptional) XOffset". 010660 Difference between CPU usage of the current and target XPUs. If the difference between CPU usage of the current and target XPUs is greater than the value of this parameter, load sharing is triggered SET between the FCCPUTHD(Option current and WRFDal) target XPUs. 040100
Offset of current XPUSHAREIN CPU load and OFFSETTHD target CPU load
BSC6900
Load sharing threshold of the current XPU. When the CPU usage of an XPU exceeds the threshold, SET load sharing FCCPUTHD(Option is WRFDal) configurable. 040100
ZeroRateUpF Release 0 kbit/s ailToRelTimer Timer length for Len failed to rate up[s]
BSC6900
For the PS BE service at a rate of 0 kbit/s, this parameter is used for the rate upsizing for DCCC triggered by event 4A. Unsuccessful rate upsizing indicates that the resources are insufficient in the cell. The service may run at a rate of 0 kbit/s for a long time. If the timer is started, the 0 kbit/s service of the UE is released after the timer expires. If the SET length is set UCOIFTIMER(Optio to 0, the timer WRFDnal) is not started. 021101
ZONET
TimeZone
BSC6900
SET TZ(Optional)
Time zone
MRFD210301
Feature Name
Value Type
Unit
Default Value
Paging UE in Idle, CELL_PCH, URA_PCH State (Type 1) Paging UE in CELL_FACH, CELL_DCH State (Type 2)
Interval Type
0~2
0~2
None
Enumeration Type
None
None
Compound Type
00:00:00~23:59:59
None
Enumeration Type
None
ASC0
Enumeration Type
None
ASC0
Enumeration Type
None
ASC0
Enumeration Type
None
ASC0
Enumeration Type
None
ASC0
Enumeration Type
None
ASC0
Enumeration Type
ASC0, ASC1, ASC2, ASC3, ASC4, ASC5, ASC6, ASC7 ASC0, ASC1, ASC2, ASC3, ASC4, ASC5, ASC6, ASC7
ASC0, ASC1, ASC2, ASC3, ASC4, ASC5, ASC6, ASC7 ASC0, ASC1, ASC2, ASC3, ASC4, ASC5, ASC6, ASC7
None
ASC0
Enumeration Type
None
None
Flow Control
Interval Type
30~100
30~100
per cent
80
Flow Control
Interval Type
30~100
30~100
per cent
80
IP Transmission Introduction on Iub Interface IP Transmission Introduction on Iu Interface IP Transmission Introduction on Enumeration Iur Interface Type
Disable(Disable), Enable(Enable)
Disable, Enable
None
Enable
Interval Type
1~36000
10~360000, step:10
ms
50
1~36000
100
AC0, AC1, AC2, AC3, AC4, AC5, AC6, AC7, AC8, AC9, AC10, AC11, AC12, AC13, AC14, AC15
AC0, AC1, AC2, AC3, AC4, AC5, AC6, AC7, AC8, AC9, AC10, AC11, AC12, AC13, AC14, AC15 None
None
AC0, AC1, AC2, AC3, AC4, AC5, AC6, AC7, AC8, AC9, AC10, AC11, AC12, AC13, AC14, AC15
AC0, AC1, AC2, AC3, AC4, AC5, AC6, AC7, AC8, AC9, AC10, AC11, AC12, AC13, AC14, AC15 None
None
AC0, AC1, AC2, AC3, AC4, AC5, AC6, AC7, AC8, AC9, AC10, AC11, AC12, AC13, AC14, AC15
AC0, AC1, AC2, AC3, AC4, AC5, AC6, AC7, AC8, AC9, AC10, AC11, AC12, AC13, AC14, AC15 None
None
6~3600
6~3600
None
Interval Type
6~3600
6~3600
None
6~3600
6~3600
10
Interval Type
1~10
0.1~1, step:0.1
per cent
Enumeration Type
OFF, ON
OFF, ON
None
OFF
Flow Control
Interval Type
30~100
30~100
per cent
70
Flow Control
30~100
30~100
per cent
70
Flow Control
ON, OFF
ON, OFF
None
ON
Admission Control
Enumeration Type
NOPRIORITY(NOP RIORITY), GOLD(GOLD), SILVER(SILVER), COPPER(COPPER NOPRIORITY, GOLD, ) SILVER, COPPER None
None
Enumeration Type
None
ACTIVE
Enumeration Type
NODELIVERY, DELIVERY
NODELIVERY, DELIVERY
None
NODELIVERY
Enumeration Type
UE_BASED
BSC/RNC Clock
Interval Type
0~65534
0~65534
None
None
BSC/RNC Clock
Enumeration Type
RNC(Local RNC), NODEB(NodeB in Local RNC), NRNC_RNC(Neigh boring RNC), NRNC_NODEB(No RNC, NODEB, deB in Neighboring NRNC_RNC, RNC) NRNC_NODEB
None
None
Interval Type
-22~5
-22~5
dB
-6
Open Loop Power Control Inner Loop Power Control Faulty Management Faulty Management
Interval Type
0~1
0~1
None
Interval Type
65334~65383
65334~65383
None
None
Interval Type
1~65535
1~65535
None
None
Faulty Management
Interval Type
1~65535
1~65535
None
None
Faulty Management
Interval Type
1~65535
1~65535
None
None
1~65535
None
None
ALL, ONEBYONE
None
None
Enumeration Type
None
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~4000000
0~4000000
kbit/s
None
15 Codes per Cell HSDPA Static Code Allocation and RNCControlled Dynamic Code Enumeration Allocation Type
None
Automatic
Faulty Management
Enumeration Type
None
all
BSC/RNC Clock
Interval Type
-1000~10000
-1000~10000
None
BSC/RNC Clock
Interval Type
-3281~32810
-3281~32810
feet
None
Faulty Management
None
Faulty Management
Enumeration Type
None
Inter Frequency Hard Handover Based on Coverage Inter Frequency Hard Handover Based on DL QoS Interval Type
0~63
None
Interval Type
0~63
None
Interval Type
0~63
None
Inter-RAT Handover Based on Service Inter-RAT Handover Based on Load Interval Type
0~63
None
None
Enumeration Type
None
NO, YES
NO, YES
None
NO
0~100
0~100
per cent
40
0~65534
0~65534
None
100
0~100
0~100
per cent
60
0~65534
0~65534
None
200
20~64000
20~64000
ms
None
Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Hybrid Iub IP Transmission ATM/IP Dual Stack Node B
Interval Type
0~4599
0~4599
None
None
None
Interval Type
0~4599
0~4599
None
None
0~4599 0~4599
0~4599 0~4599
None None
None None
String Type
None
1~100 characters
None
None
-32767~32767
-32767~32767
None
-107502~107502
-107502~107502
None
degree
None
None
-90~90
second
None
degree
None
None
-180~180
second
None
0~3600
degree
None
0~3600
degree
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
OFF
Enumeration Type
TRUE, FALSE
TRUE, FALSE
None
FALSE
NBAP(NBAP), M3UA(M3UA)
NBAP, M3UA
None
None
None
BSC/RNC Software Management BSC/RNC Software Management Load Reshuffling Overload Control Queuing and Pre-Emption Load Reshuffling Overload Control Queuing and Pre-Emption Load Reshuffling Overload Control Queuing and Pre-Emption Load Reshuffling Overload Control Queuing and Pre-Emption Load Reshuffling Overload Control Queuing and Pre-Emption
Enumeration Type
PRIMARY(Primary Area), STANDBY(Standby Area), ALL(Primary PRIMARY, and Standby Area) STANDBY, ALL
None
PRIMARY
Enumeration Type
PRIMARY
Enumeration Type
None
Silver
Enumeration Type
None
Copper
Enumeration Type
None
Copper
Enumeration Type
None
Copper
Enumeration Type
None
Copper
Load Reshuffling Overload Control Queuing and Pre-Emption Load Reshuffling Overload Control Queuing and Pre-Emption Load Reshuffling Overload Control Queuing and Pre-Emption Load Reshuffling Overload Control Queuing and Pre-Emption Load Reshuffling Overload Control Queuing and Pre-Emption Load Reshuffling Overload Control Queuing and Pre-Emption Load Reshuffling Overload Control Queuing and Pre-Emption Load Reshuffling Overload Control Queuing and Pre-Emption
Enumeration Type
None
Gold
Enumeration Type
None
Gold
Enumeration Type
None
Gold
Enumeration Type
None
Gold
Enumeration Type
None
Gold
Enumeration Type
None
Silver
Enumeration Type
None
Silver
Enumeration Type
None
Silver
Enumeration Type
None
Silver
Interval Type
3~10
3~10
None
IP Transmission Introduction on Iub Interface IP Transmission Introduction on Iu Interface IP Transmission Introduction on Iur Interface IP Re-route Based on BFD/ARP Interval Type
3~10
3~10
ms
Faulty Management
power, env, sig, trunk, hardware, software, run, comm, service, handle
power, env, sig, trunk, hardware, software, run, comm, service, handle None
None
Faulty Management
Enumeration Type
power(Power System), env(Environment System), sig(Signaling System), trunk(Trunk System), hardware(Hardware System), software(Software System), run(Running System), comm(Communicat ion System), service(QoS), handle(Processing Error)
power, env, sig, trunk, hardware, software, run, comm, service, handle None
None
DHCP
Interval Type
0~5,8~27
0~5, 8~27
None
None
DHCP Interval Type Connection with TMA (Tower Mounted Amplifier) 3GPP Specifications Conversational QoS Class Interactive QoS Class Integrity Protection Encryption ATM over E1T1 on Iub Interface ATM over Channelized STM-1/OC-3 on Iub Interface NACC Procedure Optimization MBSC Load Balancing MBSC Service Distribution MBSC Handover based on Load Enhancement IP-Based 2G/3G CoTransmission Enumeration on MBSC Side Type
0~11
0~11
None
None
NOT_ALLOWED, ALLOWED
NOT_ALLOWED, ALLOWED
None
ALLOWED
None
Interval Type
1~65535
1~65535
min
None
None
Interval Type
1~60
1~60
min
Security Management
Enumeration Type
None
None
None
Enumeration Type
None
None
None
Enumeration Type
None
None
None
String Type
None
1~63 characters
None
None
None
String Type
None
1~63 characters
None
None
None
String Type
None
1~15 characters
None
None
None
String Type
None
1~15 characters
None
None
None
Enumeration Type
None
NO_V
None
Enumeration Type
None
NO_V
None None
None ON
Security Management
Interval Type
1~65535
1~65535
min
None
None
Enumeration Type
AU4(AU4), AU3(AU3)
AU4, AU3
None
None
Interval Type
0~15
0~15
None
Interval Type
0~15
0~15
None
Interval Type
0~15
0~15
None
15
Iu Flex Load Distribution Management IP-Based 2G/3G CoTransmission on MBSC Side Faulty Management
0~65535000 step:1000
None
None
LOW, HIGH
None
HIGH
None
Enumeration Type
O1E3_R1E4(OCCU R:1E-3, RECOVERY:1E-4), O1E4_R1E5(OCCU R:1E-4, RECOVERY:1E-5), O1E5_R1E6(OCCU R:1E-5, RECOVERY:1E-6), O1E6_R1E7(OCCU R:1E-6, RECOVERY:1E-7), O1E7_R1E8(OCCU R:1E-7, RECOVERY:1E-8), O1E8_R1E9(OCCU R:1E-8, RECOVERY:1E-9), O1E9_R1E10(OCC UR:1E-9, RECOVERY:1E10), O1E10_R1E11(OC CUR:1E-10, RECOVERY:1E11), O1E11_R1E12(OC CUR:1E-11, RECOVERY:1E-12)
None
None
None
Enumeration Type
O1E3_R1E4(OCCU R:1E-3, RECOVERY:1E-4), O1E4_R1E5(OCCU R:1E-4, RECOVERY:1E-5), O1E5_R1E6(OCCU R:1E-5, RECOVERY:1E-6), O1E6_R1E7(OCCU R:1E-6, RECOVERY:1E-7), O1E7_R1E8(OCCU R:1E-7, RECOVERY:1E-8), O1E8_R1E9(OCCU R:1E-8, RECOVERY:1E-9), O1E9_R1E10(OCC UR:1E-9, RECOVERY:1E10), O1E10_R1E11(OC CUR:1E-10, RECOVERY:1E11), O1E11_R1E12(OC CUR:1E-11, RECOVERY:1E-12)
None
None
None
Enumeration Type
O1E4_R1E5(OCCU R:1E-4, RECOVERY:1E-5), O1E5_R1E6(OCCU R:1E-5, RECOVERY:1E-6), O1E6_R1E7(OCCU R:1E-6, RECOVERY:1E-7), O1E7_R1E8(OCCU R:1E-7, RECOVERY:1E-8), O1E8_R1E9(OCCU R:1E-8, RECOVERY:1E-9), O1E9_R1E10(OCC UR:1E-9, RECOVERY:1E10), O1E10_R1E11(OC CUR:1E-10, RECOVERY:1E-11) O1E4_R1E5(OCCU R:1E-4, RECOVERY:1E-5), O1E5_R1E6(OCCU R:1E-5, RECOVERY:1E-6), O1E6_R1E7(OCCU R:1E-6, RECOVERY:1E-7), O1E7_R1E8(OCCU R:1E-7, RECOVERY:1E-8), O1E8_R1E9(OCCU R:1E-8, RECOVERY:1E-9), O1E9_R1E10(OCC UR:1E-9, RECOVERY:1E10), O1E10_R1E11(OC CUR:1E-10, RECOVERY:1E-11)
None
None
None
Enumeration Type
None
None
BSC/RNC Clock
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
OFF
BSC/RNC Clock
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
OFF
Interval Type
0~621
-112~-50, step:0.1
dBm
61
String Type
None
0~200 characters
None
None
Configuration Management
String Type
None
0~128 characters
None
None
IP Address Type
None
None
IP Address Type
None Band1, Band2, Band3, Band4, Band5, Band6, Band7, Band8, Band9, BandIndNotUsed
0.0.0.0~255.255.255. 255 None Band1, Band2, Band3, Band4, Band5, Band6, Band7, Band8, Band9, BandIndNotUsed
None
None
None
Enumeration Type
GSM900_DCS1800 _BAND_USED(Use GSM900M or 1800M frequency band), PCS1900_BAND_U SED(Use GSM1900M frequency band)
GSM900_DCS1 800_BAND_USE D
3GPP Specifications
Enumeration Type
Band1, Band2, Band3, Band4, Band5, Band6, Band7, Band8, Band9, BandIndNotUsed
Band1, Band2, Band3, Band4, Band5, Band6, Band7, Band8, Band9, BandIndNotUsed
None
None
Enhanced CELL-FACH
Interval Type
1~1000
1~1000
kbit/s
None
Interval Type
0~7
0~7
None
None
Interval Type
0~1023
0~1023
None
None
Enhanced CELL-FACH
Interval Type
-350~150
-35~15, step:0.1
dB
Enhanced CELL-FACH
Interval Type
-350~150
-35~15, step:0.1
dB
-30
Interval Type
-350~150
dB
-20
None
None
Enumeration Type
R99, HSPA
R99, HSPA
None
None
Interval Type
1~10
5 None
Interval Type
1~10
2 None
Interval Type
1~60
1~60
Enumeration Type
D8, D16, D32, D64, D128, D144, D256, 8, 16, 32, 64, 128, D384 144, 256, 384
kbit/s
D384
Interval Type
1~65535
1~65535
Interval Type
1~65535
1~65535
Enhanced CELL-FACH
Interval Type
1~65535
1~65535
Interval Type
1~65535
1~65535
Dynamic Channel Configuration Control (DCCC) Inter Frequency Hard Handover Based on DL QoS Inter-RAT Handover Based on DL Enumeration QoS Type
None
RateDegrade
Dynamic Channel Configuration Control (DCCC) Inter Frequency Hard Handover Based on DL QoS Inter-RAT Handover Based on DL Enumeration QoS Type
None
None
Dynamic Channel Configuration Control (DCCC) Inter Frequency Hard Handover Based on DL QoS Inter-RAT Handover Based on DL Enumeration QoS Type
None
None
Interval Type
1~65535
1~65535
Enumeration Type
D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, D16k, D24k, D32k, D48k, D64k, D96k, D128k, D192k, D256k, D384k, D512k, D768k
16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k byte
D1024
Enumeration Type
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D0
Enhanced CELL-FACH
Enumeration Type
D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, D16k, D24k, D32k, D48k, D64k, D96k, D128k, D192k, D256k, D384k, D512k, D768k
16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k byte
D1024
Enhanced CELL-FACH
Enumeration Type
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D0
Enhanced CELL-FACH
Enumeration Type
D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, D16k, D24k, D32k, D48k, D64k, D96k, D128k, D192k, D256k, D384k, D512k, D768k
16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k byte
D1024
Enhanced CELL-FACH
Enumeration Type
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D0
Enumeration Type
D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, D16k, D24k, D32k, D48k, D64k, D96k, D128k, D192k, D256k, D384k, D512k, D768k
16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k byte
D1024
Enumeration Type
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D0
Enumeration Type
D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, D16k, D24k, D32k, D48k, D64k, D96k, D128k, D192k, D256k, D384k, D512k, D768k
16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k byte
D1024
Enumeration Type
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D0
Enumeration Type
D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, D16k, D24k, D32k, D48k, D64k, D96k, D128k, D192k, D256k, D384k, D512k, D768k
16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k byte
D1024
Enumeration Type
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D0
Enumeration Type
D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, D16k, D24k, D32k, D48k, D64k, D96k, D128k, D192k, D256k, D384k, D512k, D768k
16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k byte
D1024
Enumeration Type
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D0
Enumeration Type
D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, D16k, D24k, D32k, D48k, D64k, D96k, D128k, D192k, D256k, D384k, D512k, D768k
16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k byte
D1024
Enumeration Type
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D0
Interval Type
1~65535
1~65535
65535
Enhanced CELL-FACH
Interval Type
1~65535
1~65535
UE State in Connected Mode (CELLDCH, CELLPCH, URAPCH, CELLFACH) HSDPA State Transition
Interval Type
1~65535
1~65535
UE State in Connected Mode (CELLDCH, CELLPCH, URAPCH, CELLFACH) HSDPA State Transition
Enumeration Type
D1000
UE State in Connected Mode (CELLDCH, CELLPCH, URAPCH, CELLFACH) HSDPA State Transition
Enumeration Type
D8, D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, D16k, D24k, D32k, D48k, D64k, D96k, D128k, D192k, D256k, D384k, D512k, D768k
8, 16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k byte
D64
UE State in Connected Mode (CELLDCH, CELLPCH, URAPCH, CELLFACH) HSDPA State Transition
Enumeration Type
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D5000
Interactive and Background Traffic Class on HSUPA HSUPA 2ms Enumeration TTI Type
D8, D16, D32, D64, D128, D144, D256, D384, D608, 8, 16, 32, 64, 128, D1440, D2048, 144, 256, 384, 608, D2880 1440, 2048, 2880
kbit/s
D1440
0~1024
0~1024
20
0~100
dB
10
Dynamic Channel Configuration Control (DCCC) Inter Frequency Hard Handover Based on DL QoS Inter-RAT Handover Based on DL Enumeration QoS Type
NO, YES
NO, YES
None
YES
Interval Type
1~15
1~15
None
None
Interval Type
1~15
1~15
None
None
Dynamic Channel Configuration Control (DCCC) Inter Frequency Hard Handover Based on DL QoS Inter-RAT Handover Based on DL Enumeration QoS Type
None
None
Dynamic Channel Configuration Control (DCCC) Inter Frequency Hard Handover Based on DL QoS Inter-RAT Handover Based on DL Enumeration QoS Type
None
None
Dynamic Channel Configuration Control (DCCC) Inter Frequency Hard Handover Based on DL QoS Inter-RAT Handover Based on DL Enumeration QoS Type
None
None
Dynamic Channel Configuration Control (DCCC) Inter Frequency Hard Handover Based on DL QoS Inter-RAT Handover Based on DL Enumeration QoS Type
None
SINGLE
Dynamic Channel Configuration Control (DCCC) Inter Frequency Hard Handover Based on DL QoS Inter-RAT Handover Based on DL Enumeration QoS Type
NO, YES
NO, YES
None
YES
Dynamic Channel Configuration Control (DCCC) Inter Frequency Hard Handover Based on DL QoS Inter-RAT Handover Based on DL QoS Dynamic Channel Configuration Control (DCCC) Inter Frequency Hard Handover Based on DL QoS Inter-RAT Handover Based on DL QoS
Enumeration Type
NO, YES
NO, YES
None
YES
Enumeration Type
NO, YES
NO, YES
None
NO
Dynamic Channel Configuration Control (DCCC) Inter Frequency Hard Handover Based on DL QoS Inter-RAT Handover Based on DL QoS Interval Type
20~64000
20~64000
ms
3000
Interval Type
3~10
3~10
None
Enhanced CELL-FACH
Interval Type
1~1000
1~1000
kbit/s
32
Enhanced CELL-FACH
Interval Type
1~2000
1~2000
kbit/s
512
Interval Type
1~400
0.1~40, step:0.1
dB
100
Interval Type
1~6000
1~6000
120
Compound Type
None
Interval Type
0~10
0~10
None
Compound Type
None
Enumeration Type
OFF, ON
OFF, ON
None
ON
Interval Type
1~100
0.1~10, step:0.1
dBm
Interval Type
-63~0
5*10^(-7)~1
None
None
Inter Frequency Load Balance HCS (Hierarchical Enumeration Cell Structure) Type
FALSE, TRUE
FALSE, TRUE
None
FALSE
Inter Frequency Load Balance Intra Frequency Enumeration Load Balance Type
1, 2, 4, 8
None
D2
Inter Frequency Load Balance Intra Frequency Enumeration Load Balance Type
D250, D500
250, 500
ms
D250
Interval Type
0~30
0~30
None
None
Inter Frequency Load Balance HCS (Hierarchical Cell Structure) Interval Type
-115~-25
-115~-25
dBm
-92
-115~-25
-115~-25
dBm
-115
Faulty Management
Enumeration Type
None
ENABLE
Faulty Management
Interval Type
0~65534
0~65534
Faulty Management
Interval Type
60~65534
60~65534
900
Faulty Management
Enumeration Type
None
ENABLE
Interval Type
2000~60000
2000~60000
ms
5000
IP Transmission Introduction on Iub Interface IP Transmission Introduction on Iu Interface IP Transmission Introduction on Enumeration Iur Interface Type
None
None
Faulty Management
Enumeration Type
None
None
Configuration Management
Enumeration Type
None
Configuration Management
Enumeration Type
None
None
Configuration Management
Enumeration Type
None
None
Configuration Management
Enumeration Type
INT, DPU, XPU, OMU, SAU PEUa, AEUa, FG2a, GOUa, AOUa, POUa, UOIa, AOUc, POUc, UOIc, FG2c, GOUc, SPUa, SPUb, DPUb, DPUe, OMUa, OMUb, SAUa
None
None
Configuration Management
Enumeration Type
PEUa, AEUa, FG2a, GOUa, AOUa, POUa, UOIa, AOUc, POUc, UOIc, FG2c, GOUc, SPUa, SPUb, DPUb, DPUe, OMUa, OMUb, SAUa None
None
None
None
None
None
None
None
None
Enumeration Type
None
None
Security Management
Enumeration Type
None
INCREMENTAL
Inter-RAT Handover Based on Coverage Inter-RAT Handover Based on Service Inter-RAT Handover Enumeration Based on Load Type
None
REQUIRED
System Redundancy
Enumeration Type
XPU AEUa, PEUa, AOUa, POUa, UOIa, AOUc, POUc, UOIc SCUa, GCUa, GCGa, PEUa, AEUa, FG2a, GOUa, AOUa, POUa, UOIa, AOUc, POUc, UOIc, FG2c, GOUc, SPUa, SPUb, DPUb, DPUe SCUa, GCUa, GCGa, PEUa, AEUa, FG2a, GOUa, AOUa, POUa, UOIa, AOUc, POUc, UOIc, FG2c, GOUc, SPUa, SPUb, DPUb, DPUe, ALL
None
None
BSC/RNC Clock
Enumeration Type
None
None
Enumeration Type
SCUa, GCUa, GCGa, PEUa, AEUa, FG2a, GOUa, AOUa, POUa, UOIa, AOUc, POUc, UOIc, FG2c, GOUc, SPUa, SPUb, DPUb, DPUe None
None
Enumeration Type
SCUa, GCUa, GCGa, PEUa, AEUa, FG2a, GOUa, AOUa, POUa, UOIa, AOUc, POUc, UOIc, FG2c, GOUc, SPUa, SPUb, DPUb, DPUe, ALL None
None
None
AEUa, AOUa, AOUc, PEUa, POUa, POUc AEUa, AOUa, PEUa, POUa, AOUc, POUc AEUa, AOUa, AOUc, PEUa, POUa, POUc
AEUa, AOUa, AOUc, PEUa, POUa, POUc None AEUa, AOUa, PEUa, POUa, AOUc, POUc
None
None
None
ATM over E1T1 Enumeration on Iub Interface Type IMA for E1T1 or Channelized STM-1/OC-3 on Enumeration Iub Interface Type
None
None
None
None
Enumeration Type
AOUa, POUa, AOUa~5 POUa~6 UOIa, AOUc, UOIc, UOIa~7 AOUc~13 POUc UOIc~15 POUc~14
None
None
None
None
None
AEUa, AOUa, UOIa, AOUc, UOIc FG2a, GOUa, UOIa, FG2c, GOUc, POUc
AEUa, AOUa, UOIa, AOUc, UOIc FG2a, GOUa, UOIa, FG2c, GOUc, POUc
None
None
None
None
None
NO
OFF(OFF), ON(ON)
OFF, ON
None
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) 2G/3G CoTransmission Resources Management on MBSC Interval Type
0~200000
0~200000
kbit/s
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) 2G/3G CoTransmission Resources Management on MBSC Interval Type
0~200000
0~200000
kbit/s
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) 2G/3G CoTransmission Resources Management on MBSC Interval Type
0~100
0~100
per cent
20
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) 2G/3G CoTransmission Resources Management on MBSC Interval Type
0~100
0~100
per cent
15
Interval Type
0~200000
0~200000
kbit/s
Interval Type
0~100
0~100
per cent
Interval Type
0~200000
0~200000
kbit/s
Interval Type
0~100
0~100
per cent
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) 2G/3G CoTransmission Resources Management on MBSC Interval Type
0~100
0~100
per cent
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) 2G/3G CoTransmission Resources Management on MBSC Interval Type
0~200000
0~200000
kbit/s
None
Interval Type
100~1000
100~1000
per cent
120
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
None
None
None
Interval Type
0~100
0~100
per cent
25
Admission Control
None
Flow Control
None
None
Interval Type
1~5
1~5
Enumeration Type
None
None
Interval Type
0~11
0~11
None
None
None
NULL
0~31
0~31
None
None
Interval Type
0~31
0~31
None
None
None
Interval Type
0~31
0~31
None
None
None
Interval Type
0~31
0~31
None
None
0~167
0~167
None
None
0~167 0~167
0~167 0~167
None None
None None
None
Interval Type
0~167
0~167
None
None
IP Transmission Introduction on Iub Interface ATM/IP Dual Enumeration Stack Node B Type
SAAL(SAAL Link Type ), SCTP(SCTP Link Type), SAALSCTP(SAAL-SCTP SAAL, SCTP, SAALLink Tpye) SCTP
None
None
0~7
0~7
None
None
Interval Type
0~7
0~7
None
None
None
Interval Type
0~7
0~7
None
None
None
Interval Type
0~7
0~7
None
None
0~5,8~27
0~5, 8~27
None
None
Interval Type
0~5,8~27
0~5, 8~27
None
None
0~11
None
None
None
None
Enumeration Type
UNI(UNI Link), IMA(IMA Group), FRAATM(FRAATM Link), NCOPT(Optical Port), ATMLOGICPORT( ATM Logical Port), NULL(NULL) IMA, UNI, FRAATM, NCOPT, ATMLOGICPORT, NULL IMA, UNI, FRA, NCOPT, ATMLOGICPORT ETHER, IPLOGICPORT, TRUNK, PPP, MP
UNI, IMA, FRAATM, NCOPT, ATMLOGICPORT, NULL IMA, UNI, FRAATM, NCOPT, ATMLOGICPORT, NULL IMA, UNI, FRA, NCOPT, ATMLOGICPORT ETHER, IPLOGICPORT, TRUNK, PPP, MP
None
None
None
None
None
Enumeration Type
None
None
Enumeration Type
None
None
Enumeration Type
None
None
0~335
0~335
None
None
0~335 0~335
0~335 0~335
None None
None None
None
Interval Type
0~335
0~335
None
None
Permanent AAL5 Connections for Control Plane Traffic Interval Type BOOTP Permanent AAL5 Connections for Control Plane Traffic ATM Transmission Introduction Package ATM Switching Based Hub Node B Interval Type ATM/IP Dual Stack Node B Permanent AAL5 Connections for Control Plane Traffic Interval Type
32~65535
32~65535
None
None
32~65535
32~65535
None
None
0~4095
0~4095
None
None
BOOTP Permanent AAL5 Connections for Control Plane Traffic ATM Transmission Introduction Package ATM Switching Based Hub Node B Interval Type
0~4095
0~4095
None
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~499
0~499
None
None
Interval Type
0~499
0~499
None
None
None
Interval Type
0~499
0~499
None
None
IP Address Type
None
None
IP Address Type
None
None
None
Interval Type
4500~32767
4500~32767
byte
4500
Flow Control
Interval Type
30~100
30~100
per cent
85
Flow Control
Interval Type
30~100
30~100
per cent
85
Interval Type
0~3
0~3
None
None
Flow Control
Interval Type
30~100
30~100
per cent
70
Flow Control
Interval Type
30~100
30~100
per cent
70
Interval Type
0~65535
0~65535
None
None
0~65535
0~65535
None
None
Flow Control
ON, OFF
ON, OFF
None
ON
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
OFF
Security Management
Enumeration Type
None
None
Enhanced CELL-FACH
Interval Type
1~1000
1~1000
kbit/s
32
Enhanced CELL-FACH
Interval Type
1~2000
1~2000
kbit/s
512
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF None
None
Interval Type
0~100
0~100
None
100
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
None
Interval Type
0~100
0~100
None
Ethernet OAM
Enumeration Type
ms
1000
Interval Type
100~1000
700~1000(UNI), 100~1000(NNI)
ms
None
None
Interval Type
1024~212000
1024~212000
100ns
1024
Flow Control
Interval Type
1~100
1~100
None
15
-32767~32767
-32767~32767
None
-107502~107502
-107502~107502
None
Admission Control
None
Inter RNC Soft Handover Direct Signaling Connection Reestablishment (DSCR) Bit Field Type
DELAY_ACTIVATI ON_SUPPORT, HSDSCH_SUPPO RT, FDPCH_SUPPORT , EDCH_SUPPORT, EDCH_2MS_TTI_S UPPORT, EDCH_2SF2_AND _2SF4_SUPPORT, EDCH_2SF2_SUP PORT, EDCH_2SF4_SUP PORT, EDCH_SF4_SUPP ORT, EDCH_SF8_SUPP ORT, EDCH_HARQ_IR_ COMBIN_SUPPOR T, EDCH_HARQ_CH ASE_COMBIN_SU PPORT, CPC_DTX_DRX_S UPPORT, CPC_HS_SCCH_L ESS_OPER_SUPP ORT, HSPAPLUS_MIMO _SUPPORT, HSPAPLUS_UL_16 QAM_SUPPORT, FLEX_MACD_PDU
DELAY_ACTIVATION _SUPPORT, HSDSCH_SUPPORT, FDPCH_SUPPORT, EDCH_SUPPORT, EDCH_2MS_TTI_SU PPORT, EDCH_2SF2_AND_2 SF4_SUPPORT, EDCH_2SF2_SUPPO RT, EDCH_2SF4_SUPPO RT, EDCH_SF4_SUPPO RT, EDCH_SF8_SUPPO RT, EDCH_HARQ_IR_CO MBIN_SUPPORT, EDCH_HARQ_CHAS E_COMBIN_SUPPO RT, CPC_DTX_DRX_SU PPORT, CPC_HS_SCCH_LES S_OPER_SUPPORT, HSPAPLUS_MIMO_S UPPORT, HSPAPLUS_UL_16Q AM_SUPPORT, FLEX_MACD_PDU_S IZE_SUPPORT, FDPCH_SLOT_FOR MAT_SUPPORT, HSPAPLUS_DL_64Q None
None
-32767~32767
-32767~32767
None
-107502~107502
-107502~107502
None
degree
None
None
-90~90
second
None
degree
None
Cell ID + RTT Function Based LCS String Type Intra Node B Softer Handover Inter RNC Soft Handover Inter-RAT Handover Enumeration Based on Type
None
-180~180
second
None
ALLCELL(All cell), 3GCELL(3G cell), GSMCELL(GSM cell) NLOS_ENVIRONM ENT, LOS_ENVIRONME NT, MIXED_ENVIRON MENT
None
None
MIXED_ENVIRO NMENT
Admission Control
Enumeration Type
TU, RA, HT
TU, RA, HT
None
TU
-10000~10000
-10000~10000
None
-32808~32808
-32808~32808
None
Flow Control
Interval Type
1~100
1~100
None
15
Enumeration Type
SINGLE_HOST, DOUBLE_HOST
SINGLE_HOST, DOUBLE_HOST
None
SINGLE_HOST
Configuration Management
Interval Type
0~65535
0~65535
None
None
3GPP Specifications Streaming QoS Class Intra RNC Cell Update Intra RNC URA Update Inter RNC URA Update Intra RNC URA Update Dynamic Channel Configuration Control (DCCC) Shared Network Support in Connected Mode NACC Procedure Optimization MBSC Load Balancing MBSC Service Distribution MBSC Handover based on Load Enhancement Multi-Carrier Switch off Based on Traffic Load Interval Type
0~65535
0~65535
None
None
None
Interval Type
0~65535
0~65535
None
None
None
Interval Type
0~65535
0~65535
None
None
None
Interval Type
0~65535
0~65535
None
None
Interval Type
0~65535
0~65535
None
None
Interval Type
0~65535
0~65535
None
None
Interval Type
0~65535
0~65535
None
None
Interval Type
1~31
1~31
10
Admission Control
Enumeration Type
OFF, ON
OFF, ON
None
OFF
None
ACTIVE
UE_ASSISTED
Load Reshuffling Code Resource Management Cell ID + RTT Function Based LCS
SF4(SF4), SF8(SF8), SF16(SF16), SF32(SF32), SF64(SF64), SF128(SF128), SF256(SF256) CELL_ANTENNA, CELL_CENTER, BOTH
SF4, SF8, SF16, SF32, SF64, SF128, SF256 CELL_ANTENNA, CELL_CENTER, BOTH
None
SF8
None
None
None
String Type
None
1~31 characters
None
None
0~100
0~1, step:0.01
per cent
90
Interval Type
1~65535
1~65535
None
Interval Type
1~65535
1~65535
180
Enumeration Type
RESERVED, NOT_RESERVED
RESERVED, NOT_RESERVED
None
NOT_RESERVE D
Enumeration Type
RESERVED, NOT_RESERVED
RESERVED, NOT_RESERVED
None
NOT_RESERVE D
Intra Node B Softer Handover Intra Node B Softer Handover Inter RNC Soft Handover
Enumeration Type
AFFECT, NOT_AFFECT
AFFECT, NOT_AFFECT
None
AFFECT
Intra Node B Softer Handover Intra Node B Softer Handover Inter RNC Soft Handover
Enumeration Type
AFFECT, NOT_AFFECT
AFFECT, NOT_AFFECT
None
AFFECT
Flow Control
Interval Type
1~100
1~100
None
45
0~100
0~1, step:0.01
per cent
30
Flow Control
Interval Type
30~100
30~100
per cent
95
Flow Control
Interval Type
30~100
30~100
per cent
95
Flow Control
Interval Type
30~100
30~100
per cent
80
Flow Control
30~100
30~100
per cent
80
ON, OFF
ON, OFF
None
ON
String Type
None
0~200 characters
None
None
Enumeration Type
None
None
3GPP Specifications
Enumeration Type
NOT_REQUIRE, REQUIRE
NOT_REQUIRE, REQUIRE
None
None
Multiple RAB Package (PS RAB 2) Combination of Two PS Services Combination of One CS Service and Two PS Services Combination of Three PS Services Combination of One CS Service and Three PS Services Downlink 64 QAM 22 MIMO CPC - DTX / DRX CPC - HSSCCH less operation PDCP Header Compression (RFC2507) PDCP Header Compression (RoHC) Lossless SRNS Relocation Bit Field Type
CFG_DL_BLIND_D ETECTION_SWIT CH, CFG_HSDPA_64Q AM_SWITCH, CFG_HSDPA_MIM O_SWITCH, CFG_HSPA_DTX_ DRX_SWITCH, CFG_HSPA_HSSC CH_LESS_OP_SW ITCH, CFG_IMS_SUPPO RT_SWITCH, CFG_LOSSLESS_ DLRLC_PDUSIZEC HG_SWITCH, CFG_LOSSLESS_ RELOC_CFG_SWI TCH, CFG_MULTI_RAB_ SWITCH, CFG_PDCP_IPV6_ HEAD_COMPRES S_SWITCH, CFG_PDCP_RFC2 507_HC_SWITCH, CFG_PDCP_RFC3 095_HC_SWITCH
CFG_DL_BLIND_DE TECTION_SWITCH, CFG_HSDPA_64QA M_SWITCH, CFG_HSDPA_MIMO_ SWITCH, CFG_HSPA_DTX_D RX_SWITCH, CFG_HSPA_HSSCC H_LESS_OP_SWITC H, CFG_IMS_SUPPORT _SWITCH, CFG_LOSSLESS_DL RLC_PDUSIZECHG_ SWITCH, CFG_LOSSLESS_RE LOC_CFG_SWITCH, CFG_MULTI_RAB_S WITCH, CFG_PDCP_IPV6_H EAD_COMPRESS_S WITCH, CFG_PDCP_RFC250 7_HC_SWITCH, CFG_PDCP_RFC309 5_HC_SWITCH None
None
Security Management
Password Type None G_15, G_16, G_17, G_18, G_19, G_20, G_21, G_22, G_23, G_24, G_25, G_26, G_27, G_28, G_29, G_30, G_31 G_0~0 G_1~1 G_2~2 G_3~3 G_4~4 G_5~5 G_6~6 G_7~7 G_8~8 G_9~9 G_10~10 G_11~11 G_12~12 G_13~13 G_14~14 G_15~15 G_16~16 G_17~17 G_18~18 G_19~19 G_20~20 G_21~21 G_22~22 G_23~23 G_24~24 G_25~25 G_26~26 G_27~27 G_28~28 G_29~29 G_30~30 G_31
1~32 characters G_15, G_16, G_17, G_18, G_19, G_20, G_21, G_22, G_23, G_24, G_25, G_26, G_27, G_28, G_29, G_30, G_31
None
None
Security Management
Enumeration Type
None
None
Security Management
G_0, G_1, G_2, G_3, G_4, G_5, G_6, G_7, G_8, G_9, G_10, G_11, G_12, G_13, G_14, G_15, G_16, G_17, G_18, G_19, G_20, G_21, G_22, G_23, G_24, G_25, G_26, G_27, G_28, G_29, G_30, G_31 None
None
Security Management
String Type
None
1~32 characters
None
None
HSUPA 2ms TTI HSUPA 2ms/10ms TTI Handover SRB over HSUPA SRB over HSDPA Downlink 64 QAM 22 MIMO Downlink Enhanced L2 CPC - DTX / DRX CPC - HSSCCH less operation Dynamic Channel Configuration Control (DCCC) HCS (Hierarchical Cell Structure) Interval Type
0~999
0~999
Interactive and Background Traffic Class on HSDPA HSDPA DRD Interactive and Background Traffic Class on HSUPA HSUPA 2ms TTI Streaming Traffic Class on HSDPA Streaming Traffic Class on HSUPA SRB over HSUPA SRB over HSDPA Downlink 64 QAM 22 MIMO Downlink Enhanced L2 CPC - DTX / DRX CPC - HSSCCH less operation Dynamic Channel Configuration Control (DCCC) Interval Type
0~180
0~180
Enumeration Type
None
CONVOLUTION AL
1~5 CH0(Channel 0), CH1(Channel 1), CH2(Channel 2), CH3(Channel 3), CH4(Channel 4)
1~5
None
None
Interval Type
0~511
0~511
None
None
None
Interval Type
0~511
0~511
None
None
None
NO
None
NO
None
CRC32
Enumeration Type
None
None
Load Measurement
Enumeration Type
TEN_MSEC, MIN
TEN_MSEC, MIN
None
TEN_MSEC
Load Measurement
Enumeration Type
TEN_MSEC, MIN
TEN_MSEC, MIN
None
TEN_MSEC
Load Measurement
Enumeration Type
TEN_MSEC, MIN
TEN_MSEC, MIN
None
TEN_MSEC
Load Measurement
Enumeration Type
TEN_MSEC, MIN
TEN_MSEC, MIN
None
TEN_MSEC
Load Measurement
Enumeration Type
TEN_MSEC, MIN
TEN_MSEC, MIN
None
TEN_MSEC
Load Measurement
Enumeration Type
TEN_MSEC, MIN
TEN_MSEC, MIN
None
TEN_MSEC
Load Measurement
Enumeration Type
TEN_MSEC, MIN
TEN_MSEC, MIN
None
TEN_MSEC
AMR/WB-AMR Speech Rates Control Inter-RAT Handover Based on DL Enumeration QoS Type
TEN_MSEC, MIN
TEN_MSEC, MIN
None
TEN_MSEC
Dynamic Channel Configuration Control (DCCC) Inter-RAT Handover Based on DL Enumeration QoS Type
TEN_MSEC, MIN
TEN_MSEC, MIN
None
TEN_MSEC
Dynamic Channel Configuration Control (DCCC) Inter-RAT Handover Based on DL Enumeration QoS Type
TEN_MSEC, MIN
TEN_MSEC, MIN
None
TEN_MSEC
TEN_MSEC, MIN
TEN_MSEC, MIN
None
TEN_MSEC
MBMS Channel Audience Enumeration Rating Statistics Type Inter-RAT Handover Based on Coverage Interval Type
OFF(OFF), ON(ON)
OFF, ON
None
None
0~65535
0~65535
None
None
Intra Node B Softer Handover Intra Node B Softer Handover Inter RNC Soft Handover Inter Frequency Hard Handover Based on Coverage Inter Frequency Hard Handover Based on DL QoS Interval Type
-20~20
-10~10, step:0.5
None
Inter-RAT Handover Based on Coverage Inter-RAT Handover Based on DL QoS Inter-RAT Handover Based on Service
Interval Type
-50~50
-50~50
dB
Intra Node B Softer Handover Intra Node B Softer Handover Inter RNC Soft Handover Inter Frequency Hard Handover Based on Coverage Inter Frequency Hard Handover Based on DL QoS Inter-RAT Handover Based on Coverage Inter-RAT Handover Based on DL QoS Inter-RAT Interval Type
-20~20
dB
Intra Node B Softer Handover Intra Node B Softer Handover Inter RNC Soft Handover Inter Frequency Hard Handover Based on Coverage Inter Frequency Hard Handover Based on DL QoS Interval Type
-20~20
-10~10, step:0.5
dB
Inter-RAT Handover Based on Coverage Inter-RAT Handover Based on DL QoS Inter-RAT Handover Based on Service
Interval Type
-50~50
-50~50
dB
1~1562 ERR_PFM_1E6(RE COVERY:1E-6), ERR_PFM_5E6(RE COVERY:5E-6), ERR_PFM_1E5(RE COVERY:1E-5), ERR_PFM_5E5(RE COVERY:5E-5), ERR_PFM_1E4(RE COVERY:1E-4), ERR_PFM_5E4(RE COVERY:5E-4), ERR_PFM_1E3(RE COVERY:1E-3)
64~100000, step:64
kbit/s
None
None
Enumeration Type
None
None
BSC/RNC Clock
Enumeration Type
GCUa, GCGa
GCUa, GCGa
None
GCUa
Faulty Management
cleared, uncleared
cleared, uncleared
None
None
Enumeration Type
TRUE, FALSE
TRUE, FALSE
None
FALSE
Inter Frequency Hard Handover Based on Coverage Inter-RAT Handover Based on Coverage Bit Field Type
UL_DL_BOTH
Inter-RAT Handover Based on Coverage Inter Frequency Hard Handover Based on Enumeration Coverage Type
WALKING_SPEED _AND_HOT_SPOT _CELL, MID_SPEED_AND _HOT_SPOT_CEL L, HIGH_SPEED_AN D_HOT_SPOT_CE LL, LOW_SPEED_AN D_MEDIUM_COVE RAGE_CELL, HIGH_SPEED_AN D_MEDIUM_COVE RAGE_CELL, LOW_SPEED_AN D_HIGH_COVERA GE_CELL, HIGH_SPEED_AN D_HIGH_COVERA GE_CELL, PICO_NODEB_TY PE_COVERAGE_C ELL, OTHER_CELL
WALKING_SPEED_A ND_HOT_SPOT_CEL L, MID_SPEED_AND_H OT_SPOT_CELL, HIGH_SPEED_AND_ HOT_SPOT_CELL, LOW_SPEED_AND_ MEDIUM_COVERAG E_CELL, HIGH_SPEED_AND_ MEDIUM_COVERAG E_CELL, LOW_SPEED_AND_ HIGH_COVERAGE_ CELL, HIGH_SPEED_AND_ HIGH_COVERAGE_ CELL, PICO_NODEB_TYPE _COVERAGE_CELL, OTHER_CELL None
HSDPA Mobility Management HSUPA Mobility Management Inter Frequency Hard Handover Based on Coverage Inter-RAT Handover Based on Coverage Inter Frequency Hard Handover Based on DL QoS Inter-RAT Handover Based on Service Inter-RAT Handover Based on Load Inter-RAT Handover Phase 2 PS Handover Between UMTS and GPRS Inter-RAT Handover Based on DL QoS 3G/2G Common Load Bit Field Type
CMCF_DL_HLS_S WITCH, CMCF_UL_HLS_S WITCH, CMCF_UL_PRECF G_TOLERANCE_S WITCH, CMCF_WITHOUT_ UE_CAP_REPORT _SWITCH
CMCF_DL_HLS_SWI TCH, CMCF_UL_HLS_SWI TCH, CMCF_UL_PRECFG _TOLERANCE_SWIT CH, CMCF_WITHOUT_U E_CAP_REPORT_S WITCH None
None
3GPP Specifications
Interval Type
1~10000
1~10000
ms
5000
Security Management
String Type
None
1~200 characters
None
None
Security Management
String Type
None
0~128 characters
None
None
None
Interval Type
HSDPA Mobility Management HSUPA Mobility Management Intra Node B Softer Handover Inter RNC Soft Handover HCS (Hierarchical Cell Structure) Bit Field Type
0~19 CMP_IU_IMS_PRO C_AS_NORMAL_P S_SWITCH, CMP_IU_SYSHOIN _CMP_IUUP_FIXT O1_SWITCH, CMP_IUR_H2D_F OR_LOWR5_NRN CCELL_SWITCH, CMP_IUR_SHO_DI VCTRL_SWITCH, CMP_UU_AMR_SI D_MUST_CFG_S WITCH, CMP_UU_DST_SE RV_CELL_D2E_S WITCH, CMP_UU_IGNORE _UE_RLC_CAP_S WITCH, CMP_UU_SERV_C ELL_CHG_WITH_ ASU_SWITCH, CMP_UU_SERV_C ELL_CHG_WITH_ RB_MOD_SWITCH , CMP_UU_VOIP_U P_PROC_AS_NOR MAL_PS_SWITCH, CMP_UU_FDPCH_ COMPAT_SWITCH , CMP_UU_AMR_D RD_HHO_COMPA
0~19 None CMP_IU_IMS_PROC _AS_NORMAL_PS_S WITCH, CMP_IU_SYSHOIN_ CMP_IUUP_FIXTO1_ SWITCH, CMP_IUR_H2D_FOR _LOWR5_NRNCCEL L_SWITCH, CMP_IUR_SHO_DIV CTRL_SWITCH, CMP_UU_AMR_SID_ MUST_CFG_SWITC H, CMP_UU_DST_SER V_CELL_D2E_SWIT CH, CMP_UU_IGNORE_ UE_RLC_CAP_SWIT CH, CMP_UU_SERV_CE LL_CHG_WITH_ASU _SWITCH, CMP_UU_SERV_CE LL_CHG_WITH_RB_ MOD_SWITCH, CMP_UU_VOIP_UP_ PROC_AS_NORMAL _PS_SWITCH, CMP_UU_FDPCH_C OMPAT_SWITCH, CMP_UU_AMR_DRD _HHO_COMPAT_SW ITCH, CMP_IU_QOS_ASYM None
None
None
Configuration Management
Interval Type
1~3
1~3
None
None
3GPP Specifications Dynamic Channel Configuration Control (DCCC) MOCN Introduction Package RNC Node Enumeration Redundancy Type
CS_DOMAIN, PS_DOMAIN
CS_DOMAIN, PS_DOMAIN
None
None
3.4/6.8/13.6/27. 2 kbit/s RRC Connection and RAB Enumeration Assignment Type Admission Control Enumeration Type
None
None
None
None
3GPP Specifications
Interval Type
0~4095
0~4095
None
None
Enumeration Type
None
Enumeration Type
None
License Management None RAN Sharing Introduction Package MOCN Introduction Package
0~3 0~3
0~3 0~3
None None
None None
String Type
None
1~31 characters
None
None
Interval Type
0~31
0~31
None
None
Inter RNC Soft Handover MOCN Mobility Management Interval Type Inter RNC Soft Handover MOCN Mobility Management Interval Type MOCN Introduction Package Dedicated Carrier for Each Operator String Type RAN Sharing Phase 2 Dedicated Iub Transmission Control Traffic Priority Mapping onto Transmission Resources
0~31
0~31
None
None
0~31
0~31
None
None
None
1~31 characters
None
None
Interval Type
0~3
0~3
None
None
Interval Type
0~3
0~3
None
None
IP-Based 2G/3G CoTransmission on MBSC Side LCS Classified Zones Dedicated Carrier for Each Operator MOCN Introduction Package RNC Node Redundancy Interval Type
0~3,5~31
0~3, 5~31
None
None
Domain Specific Access Control (DSAC) Interval Type RAN Sharing Phase 2 Overbooking on ATM Transmission Overbooking on IP Transmission Interval Type RAN Sharing Introduction Package MOCN Introduction Package Dedicated Carrier for Each Operator Interval Type RAN Sharing Introduction Package MOCN Introduction Package Dedicated Carrier for Each Operator Interval Type RAN Sharing Introduction Package MOCN Introduction Package Dedicated Carrier for Each Operator Interval Type RAN Sharing Introduction Package MOCN Introduction Package Dedicated Carrier for Each Operator Interval Type
0~3
0~3
None
None
0~3
0~3
None
None
0~3,5~31
0~3, 5~31
None
None
0~3,5~31
0~3, 5~31
None
None
0~3,5~31
0~3, 5~31
None
None
0~3,5~31
0~3, 5~31
None
None
Interval Type
5~31,255
5~31, 255
None
255
RAN Sharing Introduction Package MOCN Introduction Package Dedicated Carrier for Each Enumeration Operator Type
1, 2, 3, 4
None
None
3GPP Specifications
Enumeration Type
None
None
Faulty Management
Interval Type
1~150000
1~150000
None
None
Security Management
Interval Type
10000~50000
10000~50000
None
None
Faulty Management
Interval Type
0~250
0~250
None
Faulty Management
Interval Type
0~250
0~250
None
HSDPA Static Code Allocation and RNCControlled Dynamic Code Enumeration Allocation Type
OFF(OFF), ON(ON)
OFF, ON
None
ON
HSDPA Static Code Allocation and RNCControlled Dynamic Code Allocation Interval Type
1~16
1~16
None
Interval Type
0~100
0~100
per cent
13
Interval Type
0~100
0~100
per cent
13
Enumeration Type
None
SF8
Enumeration Type
None
SF8
Enumeration Type
ON, OFF
ON, OFF
None
OFF
Enumeration Type
ON, OFF
ON, OFF
None
OFF
Load Reshuffling
Enumeration Type
FALSE(FALSE), TRUE(TRUE)
FALSE, TRUE
None
FALSE
Enumeration Type
GERMAN(German) , ENGLISH(English), ITALIAN(Italian), FRENCH(French), SPANISH(Spanish) , DUTCH(Dutch), SWEDISH(Swedish ), DANISH(Danish), PORTUGUESE(Por tuguese), FINNISH(Finnish), NORWEGIAN(Nor wegian), GREEK(Greek), TURKISH(Turkish), HUNGARIAN(Hung arian), POLISH(Polish), LANGUAGEUNSP ECIFIED(Language unspecified)
GERMAN, ENGLISH, ITALIAN, FRENCH, SPANISH, DUTCH, SWEDISH, DANISH, PORTUGUESE, FINNISH, NORWEGIAN, GREEK, TURKISH, HUNGARIAN, POLISH, LANGUAGEUNSPEC IFIED None
ENGLISH
Enumeration Type
D1/2, D1/3
1/2, 1/3
None
D1/2
Inter Frequency Hard Handover Based on Coverage Inter-RAT Handover Based on Enumeration Coverage Type
COEXIST_MEAS_ THD_CHOICE_INT ERFREQ(Choosing the inter-frequency oriented parameters), COEXIST_MEAS_ THD_CHOICE_INT ERRAT(Choosing the inter-RAT oriented parameters)
Interval Type
0~100
per cent
70
0~100
dB
20
MBSC Load Balancing MBSC Service Distribution MBSC Handover based on Load Enhancement Load Based GSM and UMTS Handover Enhancement Based on Iur-g Interval Type
1~20
1~20
Enumeration Type
NONSUPPORTING_UE _ONLY(NonSupporting UE Only), BOTH(Both), NEITHER(Neither) LOWERCASE, UPPERCASE, DIGIT, SPECIALCHARAC TER
NONSUPPORTING_UE_O NLY, BOTH, NEITHER None LOWERCASE, UPPERCASE, DIGIT, SPECIALCHARACTE R None
NONSUPPORTING_ UE_ONLY
Security Management
None
Interval Type
1~7
1~7
Interval Type
30~90
30~90
30
Interval Type
10~200
10~200
ms
10
Interval Type
10~150
10~150
ms
15
Interval Type
10~150
10~150
ms
15
Interval Type
10~150
10~150
ms
15
Interval Type
10~150
10~150
ms
15
Interval Type
10~150
10~150
ms
25
Interval Type
10~150
10~150
ms
25
Interval Type
10~150
10~150
ms
25
Interval Type
10~150
10~150
ms
25
Interval Type
10~150
10~150
ms
25
Interval Type
10~150
10~150
ms
25
Interval Type
10~150
10~150
ms
50
Interval Type
10~150
10~150
ms
50
Enumeration Type
BARRED, NOT_BARRED
BARRED, NOT_BARRED
None
None
Service Steering and Load Sharing in RRC Connection Setup Inter System Enumeration Redirect Type
Only_To_Inter_F requency
Enumeration Type
ALLOWED, NOT_ALLOWED
ALLOWED, NOT_ALLOWED
None
NOT_ALLOWED
Configuration Management
Enumeration Type
None
NO
Intra RNC Cell Update Inter RNC Cell Update Intra RNC URA Update Inter RNC URA Update Multi Frequency Band Networking Management Interval Type
0~20
0~40, step:2
dB
Intra RNC Cell Update Inter RNC Cell Update Intra RNC URA Update Inter RNC URA Update Multi Frequency Band Networking Management Interval Type
0~20,255
dB
Interval Type
-50~50
-50~50
dB
Interval Type
-50~50
-50~50
dB
Intra RNC Cell Update Multi Frequency Band Networking Management Interval Type
-16~10,127
dB
Intra RNC Cell Update Multi Frequency Band Networking Management Interval Type
-16~10,127
dB
Enumeration Type
D10(10 seconds), D20(20 seconds), D40(40 seconds), D80(80 seconds), D160(160 seconds), D320(320 seconds), D640(640 seconds), D1280(1280 seconds)
D1280
Security Management
Enumeration Type
ALL, ONLY_SSL
None
None
Interval Type
-35~-10
-35~-10
dB
-20
Enumeration Type
None
NO
Enumeration Type
kbit/s
D16
Enumeration Type
kbit/s
D16
Enhanced CELL-FACH
Interval Type
1~1000
1~1000
kbit/s
32
Enhanced CELL-FACH
Interval Type
1~2000
1~2000
kbit/s
512
NBAMR_BITRATE _4.75K, NBAMR_BITRATE _5.15K, NBAMR_BITRATE _5.90K, NBAMR_BITRATE _6.70K, NBAMR_BITRATE _7.40K, NBAMR_BITRATE _7.95K, NBAMR_BITRATE _10.20K, 4.75, 5.15, 5.90, 6.70, NBAMR_BITRATE 7.40, 7.95, 10.20, _12.20K 12.20 kbit/s WBAMR_BITRATE _6.60K, WBAMR_BITRATE _8.85K, WBAMR_BITRATE _12.65K, WBAMR_BITRATE _14.25K, WBAMR_BITRATE _15.85K, WBAMR_BITRATE _18.25K, WBAMR_BITRATE _19.85K, WBAMR_BITRATE _23.05K, 6.60, 8.85, 12.65, WBAMR_BITRATE 14.25, 15.85, 18.25, _23.85K 19.85, 23.05, 23.85
NBAMR_BITRA TE_12.20K
AMR-WB (Adaptive Multi Rate Wide Band) AMR/WB-AMR Speech Rates Enumeration Control Type 2G/3G CoTransmission Resources Management on MBSC
kbit/s
WBAMR_BITRA TE_23.85K
Interval Type
1~28
1~28
None
Encryption
Interval Type
1024~4294967295 1024~4294967295
None
None
Encryption
Enumeration Type
ON, OFF
ON, OFF
None
None
Enumeration Type
None
CP1_not_Suppo rted
Enumeration Type
None
CP1_not_Suppo rted
Flow Control
Interval Type
30~100
30~100
per cent
90
Flow Control
Interval Type
30~100
30~100
per cent
75
Flow Control
Interval Type
40~100
40~100
per cent
90
Enumeration Type
D0, D1, D2, D4, D8, D16, D32, D64, 0, 1, 2, 4, 8, 16, 32, D128, D256, D512, 64, 128, 256, 512, INFINITY INFINITY
None
None
Enumeration Type
D0, D2, D4, D8, D10, D20, D40, D80, D160, D16, D32, D64
ms
D2
Security Management
String Type
None
0~200 characters
None
None
Security Management
Enumeration Type
None
None
Interval Type
1~16
1~16
None
Enumeration Type
None
UNAVAILABLE
System Redundancy
Interval Type
30~100
30~100
per cent
85
System Redundancy
Interval Type
30~100
30~100
per cent
75
System Redundancy
Interval Type
30~100
30~100
per cent
75
System Redundancy
Interval Type
30~100
30~100
per cent
65
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~100
0~100
per cent
100
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF None
None
Interval Type
0~100
0~100
None
100
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
None
Interval Type
0~100
0~100
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type License Management
0~100
0~100
per cent
100
Interval Type
0~80400
0~80400
Erl
None
Inter-RAT Handover Based on Service Inter-RAT Handover Based on Load Load Based 3G2G Handover Enhancement Based on Iur-g Interval Type
0~100
0~100
per cent
80
Enumeration Type
OFF, ON
OFF, ON
None
OFF
Interval Type
60~900
60~900
900
Enumeration Type
SUPP_NONE
Interval Type
1~10
1~10
None
None
FALSE, TRUE
FALSE, TRUE
None
None
FALSE, TRUE
FALSE, TRUE
None
TRUE
Enumeration Type
OFF, ON
OFF, ON
None
OFF
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~100
0~100
per cent
100
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF None
None
Interval Type
0~100
0~100
None
100
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
None
Interval Type
0~100
0~100
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~100
0~100
per cent
100
CS_AMRC_SWITCH, CS_HANDOVER_TO _UTRAN_DEFAULT_ CFG_SWITCH, CS_IUUP_V2_SUPP ORT_SWITCH, CS_ZERO_C_AMR_ CFG_TWO_CODCH_ SWITCH None
None
Enumeration Type
None
DCH
Interval Type
-100~100
-100~100
ms
Interval Type
-100~100
-100~100
ms
Enumeration Type
EDCH_TTI_10ms, EDCH_TTI_2ms
EDCH_TTI_10ms, EDCH_TTI_2ms
None
EDCH_TTI_10m s
OFF, ON
OFF, ON
None
OFF
None
Enumeration Type
ON(ON), OFF(OFF)
ON, OFF
None
None
Interval Type
0~16777215
0~16777215
None
None
Enumeration Type
bit
BIT2
Enumeration Type
bit
BIT4
Flow Control
Interval Type
30~100
30~100
per cent
95
Flow Control
Interval Type
30~100
30~100
per cent
95
Interval Type
1~10
0.01~0.1, step:0.01
per cent
Interval Type
0~100
0~1, step:0.01
per cent
50
None
Interval Type
0,2,4,8,10,12,14,16, 0, 2, 4, 8, 10, 12, 14, 18,20,22,24,26 16, 18, 20, 22, 24, 26 None
None
Enumeration Type
ON(ON), OFF(OFF)
ON, OFF
None
None
Enumeration Type
None
None
Interval Type
0~4799
0~4799
None
None
Enumeration Type
D8, D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, D16k, D24k, D32k, D48k, D64k, D96k, D128k, D192k, D256k, D384k, D512k, D768k
8, 16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k byte
D64
Enumeration Type
D1000
Enumeration Type
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D5000
String Type
None
1~63 character
None
None
NOLIMIT(No Limit), LIMIT(Limit) NOLIMIT, LIMIT None YEAR, MONTH, DAY 2000-1-1~2099-12-31 None
NOLIMIT None
1~255
1~255
30
Interval Type
0~255
0~255
30
RATE_UP_AND _DOWN_ON_D CH
1~65535
1~65535
30
1~1000
10~10000, step: 10
ms
100
0~1023
0~1023
None
16
0~1023
0~1023
None
Interval Type
0~3,255
0~3, 255
None
None
Interval Type
-35~-10
-35~-10
dB
-22
Admission Control
Interval Type
-30~30
-30~30
dB
-13
None
Interval Type
4~255
4~100(AEUa), 4~255(AOUa/AOUc)
None
None
Interval Type
0~3600
0~3600
None
Conversational QoS Class Streaming QoS Class Interactive QoS Class Background QoS Class Satellite Transmission on Iub Interface Interval Type Conversational QoS Class Streaming QoS Class Interactive QoS Class Background QoS Class Satellite Transmission on Iub Interface Interval Type
1~5
1~5
None
None
1~5
1~5
None
None
Interval Type
0~100
0~100
per cent
Interval Type
-2~-1
-4~-2, Step:2
dBm
None
Interval Type
-2~-1
-4~-2, step:2
None
None
IP Transmission Introduction on Iu Interface Interval Type Security Management RAN Sharing Introduction Package MOCN Introduction Package
0~186
0~186
None
None
String Type
None
1~110 characters
None
None
String Type
None
1~64 characters
None
None
None
IP Address Type
None
None
None
IP Address Type
None
None
None
IP Address Type
None
None
None
Interval Type
1~1000
1~1000
None
None
None
IP Address Type
None
None
None
Enumeration Type
None
None
Security Management
Enumeration Type
None
None
BSC/RNC Clock
Interval Type
1~60
1~60
min
IP Transmission Introduction on Iub Interface IP Transmission Introduction on Iu Interface IP Transmission Introduction on IP Address Iur Interface Type
None
None
None
Interval Type
0~63
0~63
None
None
None
Enumeration Type
MON_1(No.1), MON_2(No.2), MON_3(No.3), MON_4(No.4), MON_5(No.5), MON_6(No.6), MON_7(No.7), MON_8(No.8), MON_9(No.9), MON_10(No.10), MON_11(No.11), MON_12(No.12), MON_13(No.13), MON_14(No.14), MON_15(No.15), MON_16(No.16), MON_17(No.17), MON_18(No.18), MON_19(No.19), MON_20(No.20), MON_21(No.21), MON_22(No.22), MON_23(No.23), MON_24(No.24), MON_25(No.25), MON_26(No.26), MON_27(No.27), MON_28(No.28), MON_29(No.29), MON_30(No.30), MON_31(No.31)
MON_1~MON_31
None
None
None
Enumeration Type
SUN(Sunday), MON(Monday), TUE(Tuesday), WED(Wednesday), THU(Thursday), FRI(Friday), SUN, MON, TUE, SAT(Saturday) WED, THU, FRI, SAT None
None
License Management
String Type
None
1~128 characters
None
None
UPLINK, DOWNLINK
None
Intra Node B Softer Handover Intra Node B Softer Handover Inter RNC Soft Handover
Enumeration Type
MAY(NodeB chooses whether combine at NodeB), MUST(Must combine at NodeB), MUST_NOT(Must MAY, MUST, combine at RNC) MUST_NOT
None
MAY
Admission Control
Interval Type
0~100
None
50
AMR/WB-AMR Speech Rates Control Inter-RAT Handover Based on DL QoS Interval Type
1~6000
10~60000, step: 10
ms
64
Admission Control
Interval Type
0~100
None
10
Load Measurement
Enumeration Type
D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19
D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19
None
D6
Enumeration Type
D8, D16, D32, D64, D128, D144, D256, 8, 16, 32, 64, 128, D384 144, 256, 384
kbit/s
D128
Enumeration Type
D8, D16
8, 16
kbit/s
D8
Enumeration Type
D8, D16
8, 16
kbit/s
D8
D8, D16, D32, D64, D128, D144, D256, 8, 16, 32, 64, 128, D384 144, 256, 384
kbit/s
D64
HSDPA Introduction Package Interactive and Background Traffic Class on Enumeration HSDPA Type
D8, D16, D32, D64, D128, D144, D256, D384, D768, D1024, D1536, D1800, D2048, D3600, D7200, D10100, D13900
8, 16, 32, 64, 128, 144, 256, 384, 768, 1024, 1536, 1800, 2048, 3600, 7200, 10100, 13900
kbit/s
D64
Dynamic Channel Configuration Control (DCCC) Inter-RAT Handover Based on DL QoS Interval Type
1~6000
10~60000, step: 10
ms
64
Dynamic Channel Configuration Control (DCCC) Inter-RAT Handover Based on DL QoS Interval Type
1~6000
10~60000, step: 10
ms
64
Load Measurement
Interval Type
1~32
1~32
None
Admission Control
Interval Type
0~100
0~1, step:0.01
per cent
Admission Control
Interval Type
0~100
0~1, step:0.01
per cent
90
Inter Frequency Hard Handover Based on Coverage Inter-RAT Handover Based on Coverage Bit Field Type
SF/2
0~255
0~255
None
None
Admission Control
Interval Type
0~100
0~1, step:0.01
per cent
80
Admission Control
Interval Type
0~100
0~1, step:0.01
per cent
80
Load Reshuffling
Interval Type
1~10
1~10
None
Load Reshuffling
Interval Type
1~10
1~10
None
Load Reshuffling
Interval Type
1~10
1~10
None
Load Reshuffling
Interval Type
1~10
1~10
None
D8, D16, D32, D64, D128, D144, D256, 8, 16, 32, 64, 128, D384 144, 256, 384
kbit/s
D64
D8, D16, D32, D64, D128, D144, D256, 8, 16, 32, 64, 128, D384 144, 256, 384
kbit/s
D64
Enumeration Type
kbit/s
D64
Admission Control
Enumeration Type
None
SF32
Admission Control
Interval Type
0~100
0~1, step:0.01
per cent
85
Admission Control
Interval Type
0~100
0~1, step:0.01
per cent
Admission Control
Interval Type
0~100
None
10
Load Reshuffling
Interval Type
0~400000
0~400000
bit/s
200000
Load Reshuffling
Interval Type
0~100
0~1, step:0.01
per cent
20
Load Reshuffling
Interval Type
1~10
1~10
None
Load Measurement
Interval Type
1~32
1~32
None
Load Reshuffling
Interval Type
1~10
1~10
None
Load Reshuffling
Interval Type
1~10
1~10
None
Load Reshuffling
Enumeration Type
None
SF8
Load Reshuffling
Enumeration Type
None
SF8
Load Reshuffling
Enumeration Type
NoAct(no action), InterFreqLDHO(inte r-freq load handover), BERateRed(BE traff rate reduction), QoSRenego(uncont rolled real-time traff Qos re-negotiation), CSInterRatShouldB eLDHO(CS domain inter-rat should be load handover), PSInterRatShouldB eLDHO(PS domain inter-rat should be load handover), AMRRateRed(AMR traff rate reduction), MBMSDecPower(M BMS descend power), CodeAdj(Code adjust), CSInterRatShouldN otLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldN otLDHO(PS domain inter-rat should not be load handover)
NoAct, InterFreqLDHO, BERateRed, QoSRenego, CSInterRatShouldBeL DHO, PSInterRatShouldBeL DHO, AMRRateRed, MBMSDecPower, CodeAdj, CSInterRatShouldNot LDHO, PSInterRatShouldNot LDHO None
NoAct
Load Reshuffling
Enumeration Type
NoAct(no action), InterFreqLDHO(inte r-freq load handover), BERateRed(BE traff rate reduction), QoSRenego(uncont rolled real-time traff Qos re-negotiation), CSInterRatShouldB eLDHO(CS domain inter-rat should be load handover), PSInterRatShouldB eLDHO(PS domain inter-rat should be load handover), AMRRateRed(AMR traff rate reduction), MBMSDecPower(M BMS descend power), CodeAdj(Code adjust), CSInterRatShouldN otLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldN otLDHO(PS domain inter-rat should not be load handover)
NoAct, InterFreqLDHO, BERateRed, QoSRenego, CSInterRatShouldBeL DHO, PSInterRatShouldBeL DHO, AMRRateRed, MBMSDecPower, CodeAdj, CSInterRatShouldNot LDHO, PSInterRatShouldNot LDHO None
NoAct
Load Reshuffling
Enumeration Type
NoAct(no action), BERateRed(BE traff rate reduction), QoSRenego(uncont rolled real-time traff Qos re-negotiation), CSInterRatShouldB eLDHO(CS domain inter-rat should be load handover), PSInterRatShouldB eLDHO(PS domain inter-rat should be load handover), CSInterRatShouldN otLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldN otLDHO(PS domain inter-rat should not be load handover)
NoAct, BERateRed, QoSRenego, CSInterRatShouldBeL DHO, PSInterRatShouldBeL DHO, SInterRatShouldNotL DHO, PSInterRatShouldNot LDHO None
NoAct
Load Reshuffling
Enumeration Type
NoAct(no action), InterFreqLDHO(inte r-freq load handover), BERateRed(BE traff rate reduction), QoSRenego(uncont rolled real-time traff Qos re-negotiation), CSInterRatShouldB eLDHO(CS domain inter-rat should be load handover), PSInterRatShouldB eLDHO(PS domain inter-rat should be load handover), AMRRateRed(AMR traff rate reduction), MBMSDecPower(M BMS descend power), CodeAdj(Code adjust), CSInterRatShouldN otLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldN otLDHO(PS domain inter-rat should not be load handover)
NoAct, InterFreqLDHO, BERateRed, QoSRenego, CSInterRatShouldBeL DHO, PSInterRatShouldBeL DHO, AMRRateRed, MBMSDecPower, CodeAdj, CSInterRatShouldNot LDHO, PSInterRatShouldNot LDHO None
CodeAdj
Load Reshuffling
Enumeration Type
NoAct(no action), BERateRed(BE traff rate reduction), QoSRenego(uncont rolled real-time traff Qos re-negotiation), CSInterRatShouldB eLDHO(CS domain inter-rat should be load handover), PSInterRatShouldB eLDHO(PS domain inter-rat should be load handover), CSInterRatShouldN otLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldN otLDHO(PS domain inter-rat should not be load handover)
NoAct, BERateRed, QoSRenego, CSInterRatShouldBeL DHO, PSInterRatShouldBeL DHO, SInterRatShouldNotL DHO, PSInterRatShouldNot LDHO None
BERateRed
Load Reshuffling
Enumeration Type
NoAct(no action), InterFreqLDHO(inte r-freq load handover), BERateRed(BE traff rate reduction), QoSRenego(uncont rolled real-time traff Qos re-negotiation), CSInterRatShouldB eLDHO(CS domain inter-rat should be load handover), PSInterRatShouldB eLDHO(PS domain inter-rat should be load handover), AMRRateRed(AMR traff rate reduction), MBMSDecPower(M BMS descend power), CodeAdj(Code adjust), CSInterRatShouldN otLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldN otLDHO(PS domain inter-rat should not be load handover)
NoAct, InterFreqLDHO, BERateRed, QoSRenego, CSInterRatShouldBeL DHO, PSInterRatShouldBeL DHO, AMRRateRed, MBMSDecPower, CodeAdj, CSInterRatShouldNot LDHO, PSInterRatShouldNot LDHO None
NoAct
Load Reshuffling
Enumeration Type
NoAct(no action), BERateRed(BE traff rate reduction), QoSRenego(uncont rolled real-time traff Qos re-negotiation), CSInterRatShouldB eLDHO(CS domain inter-rat should be load handover), PSInterRatShouldB eLDHO(PS domain inter-rat should be load handover), CSInterRatShouldN otLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldN otLDHO(PS domain inter-rat should not be load handover)
NoAct, BERateRed, QoSRenego, CSInterRatShouldBeL DHO, PSInterRatShouldBeL DHO, SInterRatShouldNotL DHO, PSInterRatShouldNot LDHO None
NoAct
Load Reshuffling
Enumeration Type
NoAct(no action), InterFreqLDHO(inte r-freq load handover), BERateRed(BE traff rate reduction), QoSRenego(uncont rolled real-time traff Qos re-negotiation), CSInterRatShouldB eLDHO(CS domain inter-rat should be load handover), PSInterRatShouldB eLDHO(PS domain inter-rat should be load handover), AMRRateRed(AMR traff rate reduction), MBMSDecPower(M BMS descend power), CodeAdj(Code adjust), CSInterRatShouldN otLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldN otLDHO(PS domain inter-rat should not be load handover)
NoAct, InterFreqLDHO, BERateRed, QoSRenego, CSInterRatShouldBeL DHO, PSInterRatShouldBeL DHO, AMRRateRed, MBMSDecPower, CodeAdj, CSInterRatShouldNot LDHO, PSInterRatShouldNot LDHO None
NoAct
Load Reshuffling
Interval Type
1~10
1~10
None
Load Reshuffling
Interval Type
1~10
1~10
None
Load Reshuffling
Interval Type
0~100
0~1, step:0.01
per cent
60
Load Reshuffling
Enumeration Type
NoAct(no action), InterFreqLDHO(inte r-freq load handover), BERateRed(BE traff rate reduction), QoSRenego(uncont rolled real-time traff Qos re-negotiation), CSInterRatShouldB eLDHO(CS domain inter-rat should be load handover), PSInterRatShouldB eLDHO(PS domain inter-rat should be load handover), AMRRateRed(AMR traff rate reduction), MBMSDecPower(M BMS descend power), CodeAdj(Code adjust), CSInterRatShouldN otLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldN otLDHO(PS domain inter-rat should not be load handover)
NoAct, InterFreqLDHO, BERateRed, QoSRenego, CSInterRatShouldBeL DHO, PSInterRatShouldBeL DHO, AMRRateRed, MBMSDecPower, CodeAdj, CSInterRatShouldNot LDHO, PSInterRatShouldNot LDHO None
InterFreqLDHO
Load Reshuffling
Enumeration Type
NoAct(no action), BERateRed(BE traff rate reduction), QoSRenego(uncont rolled real-time traff Qos re-negotiation), CSInterRatShouldB eLDHO(CS domain inter-rat should be load handover), PSInterRatShouldB eLDHO(PS domain inter-rat should be load handover), CSInterRatShouldN otLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldN otLDHO(PS domain inter-rat should not be load handover)
NoAct, BERateRed, QoSRenego, CSInterRatShouldBeL DHO, PSInterRatShouldBeL DHO, SInterRatShouldNotL DHO, PSInterRatShouldNot LDHO None
NoAct
Load Reshuffling
Enumeration Type
NoAct(no action), InterFreqLDHO(inte r-freq load handover), BERateRed(BE traff rate reduction), QoSRenego(uncont rolled real-time traff Qos re-negotiation), CSInterRatShouldB eLDHO(CS domain inter-rat should be load handover), PSInterRatShouldB eLDHO(PS domain inter-rat should be load handover), AMRRateRed(AMR traff rate reduction), MBMSDecPower(M BMS descend power), CodeAdj(Code adjust), CSInterRatShouldN otLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldN otLDHO(PS domain inter-rat should not be load handover)
NoAct, InterFreqLDHO, BERateRed, QoSRenego, CSInterRatShouldBeL DHO, PSInterRatShouldBeL DHO, AMRRateRed, MBMSDecPower, CodeAdj, CSInterRatShouldNot LDHO, PSInterRatShouldNot LDHO None
NoAct
Load Reshuffling
Enumeration Type
NoAct(no action), InterFreqLDHO(inte r-freq load handover), BERateRed(BE traff rate reduction), QoSRenego(uncont rolled real-time traff Qos re-negotiation), CSInterRatShouldB eLDHO(CS domain inter-rat should be load handover), PSInterRatShouldB eLDHO(PS domain inter-rat should be load handover), AMRRateRed(AMR traff rate reduction), MBMSDecPower(M BMS descend power), CodeAdj(Code adjust), CSInterRatShouldN otLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldN otLDHO(PS domain inter-rat should not be load handover)
NoAct, InterFreqLDHO, BERateRed, QoSRenego, CSInterRatShouldBeL DHO, PSInterRatShouldBeL DHO, AMRRateRed, MBMSDecPower, CodeAdj, CSInterRatShouldNot LDHO, PSInterRatShouldNot LDHO None
NoAct
Load Reshuffling
Enumeration Type
NoAct(no action), BERateRed(BE traff rate reduction), QoSRenego(uncont rolled real-time traff Qos re-negotiation), CSInterRatShouldB eLDHO(CS domain inter-rat should be load handover), PSInterRatShouldB eLDHO(PS domain inter-rat should be load handover), CSInterRatShouldN otLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldN otLDHO(PS domain inter-rat should not be load handover)
NoAct, BERateRed, QoSRenego, CSInterRatShouldBeL DHO, PSInterRatShouldBeL DHO, SInterRatShouldNotL DHO, PSInterRatShouldNot LDHO None
NoAct
Load Reshuffling
Enumeration Type
NoAct(no action), InterFreqLDHO(inte r-freq load handover), BERateRed(BE traff rate reduction), QoSRenego(uncont rolled real-time traff Qos re-negotiation), CSInterRatShouldB eLDHO(CS domain inter-rat should be load handover), PSInterRatShouldB eLDHO(PS domain inter-rat should be load handover), AMRRateRed(AMR traff rate reduction), MBMSDecPower(M BMS descend power), CodeAdj(Code adjust), CSInterRatShouldN otLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldN otLDHO(PS domain inter-rat should not be load handover)
NoAct, InterFreqLDHO, BERateRed, QoSRenego, CSInterRatShouldBeL DHO, PSInterRatShouldBeL DHO, AMRRateRed, MBMSDecPower, CodeAdj, CSInterRatShouldNot LDHO, PSInterRatShouldNot LDHO None
NoAct
Load Reshuffling
Enumeration Type
NoAct(no action), InterFreqLDHO(inte r-freq load handover), BERateRed(BE traff rate reduction), QoSRenego(uncont rolled real-time traff Qos re-negotiation), CSInterRatShouldB eLDHO(CS domain inter-rat should be load handover), PSInterRatShouldB eLDHO(PS domain inter-rat should be load handover), AMRRateRed(AMR traff rate reduction), MBMSDecPower(M BMS descend power), CodeAdj(Code adjust), CSInterRatShouldN otLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldN otLDHO(PS domain inter-rat should not be load handover)
NoAct, InterFreqLDHO, BERateRed, QoSRenego, CSInterRatShouldBeL DHO, PSInterRatShouldBeL DHO, AMRRateRed, MBMSDecPower, CodeAdj, CSInterRatShouldNot LDHO, PSInterRatShouldNot LDHO None
BERateRed
Load Reshuffling
Enumeration Type
NoAct(no action), BERateRed(BE traff rate reduction), QoSRenego(uncont rolled real-time traff Qos re-negotiation), CSInterRatShouldB eLDHO(CS domain inter-rat should be load handover), PSInterRatShouldB eLDHO(PS domain inter-rat should be load handover), CSInterRatShouldN otLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldN otLDHO(PS domain inter-rat should not be load handover)
NoAct, BERateRed, QoSRenego, CSInterRatShouldBeL DHO, PSInterRatShouldBeL DHO, SInterRatShouldNotL DHO, PSInterRatShouldNot LDHO None
NoAct
Load Reshuffling
Interval Type
0~100
0~1, step:0.01
per cent
70
Load Measurement
Interval Type
10~600000
10~600000
ms
1000
D16, D32, D48, D64, D96, D128, 16, 32, 48, 64, 96, D256, D512, D1024 128, 256, 512, 1024
None
D64
Admission Control
Interval Type
0~100
0~1, step:0.01
per cent
Dynamic Channel Configuration Control (DCCC) Inter-RAT Handover Based on DL Enumeration QoS Type
D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, 0, 1, 2, 3, 4, 5, 6, 7, 8, D17, D19 9, 11, 13, 15, 17, 19 None
D1
AUTO_CALC, HAND_APPOINT
0, 1
None
HAND_APPOIN T
D16, D32, D64, D128, D144, D256, 16, 32, 64, 128, 144, D384 256, 384
kbit/s
D128
1~4294967295
1~4294967295
ms
3000
1~4294967295
1~4294967295
ms
3000
Admission Control
Interval Type
0~100
None
100
Load Measurement
Interval Type
1~32
1~32
None
Overload Control
Interval Type
1~10
1~10
None
Overload Control
Interval Type
0~100
0~100
None
Load Measurement
Enumeration Type
D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19
D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19
None
D3
Overload Control
Interval Type
0~100
0~1, step:0.01
per cent
85
Overload Control
Interval Type
0~10
0~10
None
Load Measurement
Interval Type
1~6000
10~60000, step:10
None
100
Overload Control
Interval Type
0~100
0~1, step:0.01
per cent
95
Admission Control
Interval Type
0~100
0~1, step:0.01
per cent
75
None
None
Load Reshuffling
Interval Type
1~10
1~10
None
Load Reshuffling
Interval Type
1~10
1~10
None
Load Reshuffling
Interval Type
1~10
1~10
None
Load Reshuffling
Interval Type
1~10
1~10
None
NO, YES
NO, YES
None
None
AMR/WB-AMR Speech Rates Control Inter-RAT Handover Based on DL Enumeration QoS Type
NO, YES
NO, YES
None
None
Enumeration Type
NO, YES
NO, YES
None
None
Inter Frequency Hard Handover Based on DL QoS Inter-RAT Handover Based on DL QoS Interval Type
0~512
0~512
20
NO, YES
NO, YES
None
None
NO, YES
NO, YES
None
None
AMR/WB-AMR Speech Rates Control Inter Frequency Hard Handover Based on DL Enumeration QoS Type
NO, YES
NO, YES
None
None
Enumeration Type
NO, YES
NO, YES
None
None
OFF(The switch of DL R99 congestion control is off), ON(The switch of DL R99 congestion control is on) OFF, ON
None
OFF
2_Rates, 3_Rates
2_Rates, 3_Rates
None
3_Rates
2_Rates, 3_Rates
2_Rates, 3_Rates
None
3_Rates
Inter Frequency Hard Handover Based on DL QoS Inter-RAT Handover Based on DL QoS Interval Type
-15~15
-15~15
dB
D4(SF4), D8(SF8), D16(SF16), D32(SF32), D64(SF64), D128(SF128), SF4, SF8, SF16, D256(SF256), SF32, SF64, SF128, D512(SF512) SF256, SF512
None
None
Inter Frequency Hard Handover Based on Coverage Inter-RAT Handover Based on Enumeration Coverage Type
FALSE, TRUE
None
FALSE
Inter-RAT Handover Based on Coverage Inter Frequency Hard Handover Based on Enumeration Coverage Type
D8, D16, D32, D64, 8, 16, 32, 64, 128, D128, D256 256
None
D64
Admission Control
Interval Type
0~100
None
10
Admission Control
Interval Type
0~100
None
100
D8, D16, D32, D64, D128, D144, D256, 8, 16, 32, 64, 128, D384 144, 256, 384
kbit/s
D64
0~559
dB
50
AMR-WB (Adaptive Multi Rate Wide Band) AMR/WB-AMR Speech Rates Control Interval Type
0~559
dB
50
0~559
dB
50
AMR-WB (Adaptive Multi Rate Wide Band) AMR/WB-AMR Speech Rates Control Interval Type
0~559
dB
50
1~560
dB
120
AMR-WB (Adaptive Multi Rate Wide Band) AMR/WB-AMR Speech Rates Control Interval Type
1~560
dB
120
1~560
dB
120
AMR-WB (Adaptive Multi Rate Wide Band) AMR/WB-AMR Speech Rates Control Interval Type
1~560
dB
120
Admission Control
Interval Type
1~200
1~200
None
80
Inter Frequency Hard Handover Based on DL QoS Interval Type None Interval Type
1~6000 3~505
ms None None
64
PsBlk(BLOCK PS), CsAndPsBlk(BLOC K CS AND PS) PsBlk, CsAndPsBlk CLOSE(Close), OPEN(Open) CLOSE, OPEN
None None
None OPEN
Interval Type
1~16777215
None
None
Enumeration Type
D1, D2, D5
1, 2, 5
None
D1
Enumeration Type
D1, D2, D5
1, 2, 5
None
D1
HSDPA Introduction Package HSUPA Introduction Package ATM Transmission Introduction Package
Enumeration Type
None
SLOT_FORMAT _1
String Type
None
1~11 characters
None
None
Enumeration Type
None
None
22 MIMO
Enumeration Type
None
None
Enumeration Type
None
None
Enumeration Type
None
None
Enumeration Type
SINGLE_TPC
Enumeration Type
IUCS(IUCS), IUPS(IUPS), IUR(IUR), IUCS_RANAP(IUC S_RANAP), IUCS_ALCAP(IUC S_ALCAP), AAL2SWITCH(AAL 2SWITCH), STP(STP)
None
None
1024~3584
1024~3584
None
None
None
Interval Type
0~5,8~27
0~5, 8~27
None
None
3GPP Specifications
Interval Type
0~186
0~186
None
None
3GPP Specifications
Interval Type
0~186
0~186
None
None
3GPP Specifications
Interval Type
0~186
0~186
None
None
HSDPA State Transition HSUPA DCCC HSUPA 2ms/10ms TTI Handover Active Queue Management (AQM) Dynamic Channel Configuration Control (DCCC) Overbooking on ATM Transmission Overbooking on IP Transmission Bit Field Type
DRA_AQM_SWITC H, DRA_BE_EDCH_T TI_RECFG_SWITC H, DRA_BE_RATE_D OWN_BF_HO_SWI TCH, DRA_DCCC_SWIT CH, DRA_HSDPA_DL_ FLOW_CONTROL _SWITCH, DRA_HSDPA_STA TE_TRANS_SWIT CH, DRA_HSUPA_DCC C_SWITCH, DRA_HSUPA_STA TE_TRANS_SWIT CH, DRA_IU_QOS_RE NEG_SWITCH, DRA_PS_BE_STA TE_TRANS_SWIT CH, DRA_PS_NON_BE _STATE_TRANS_ SWITCH, DRA_R99_DL_FLO W_CONTROL_SW ITCH, DRA_THROUGHP UT_DCCC_SWITC H
DRA_AQM_SWITCH, DRA_BE_EDCH_TTI _RECFG_SWITCH, DRA_BE_RATE_DO WN_BF_HO_SWITC H, DRA_DCCC_SWITC H, DRA_HSDPA_DL_FL OW_CONTROL_SWI TCH, DRA_HSDPA_STATE _TRANS_SWITCH, DRA_HSUPA_DCCC _SWITCH, DRA_HSUPA_STATE _TRANS_SWITCH, DRA_IU_QOS_RENE G_SWITCH, DRA_PS_BE_STATE _TRANS_SWITCH, DRA_PS_NON_BE_S TATE_TRANS_SWIT CH, DRA_R99_DL_FLOW _CONTROL_SWITC H, DRA_THROUGHPUT _DCCC_SWITCH None
None
Interval Type
-24~0
-24~0
dB
-18
Interval Type
-24~0
-24~0
dB
-18
3GPP Specifications
Interval Type
1~10000
1~10000
ms
5000
3GPP Specifications
Interval Type
1~10000
1~10000
ms
5000
Interval Type
0~5
0~5
None
Interval Type
0~5
0~5
None
Dynamic Channel Configuration Control (DCCC) Inter-RAT Handover Based on DL Enumeration QoS Type
NO, YES
NO, YES
None
NO
F5
Interval Type
10~150
10~150
ms
60
None
Interval Type
10~150
10~150
ms
60
Interval Type
10~150
10~150
ms
60
Interval Type
10~150
10~150
ms
60
None
Interval Type
10~150
10~150
ms
80
Interval Type
10~150
10~150
ms
80
HSDPA DRD Service Steering and Load Sharing in RRC Connection Setup Intra System Direct Retry Inter System Direct Retry Inter System Redirect Bit Field Type
None
Enumeration Type
4, 5, 8, 10, 16, 20
None
D5
Interval Type
6~9
6~9
None
Paging UE in Idle, CELL_PCH, URA_PCH State (Type 1) Paging UE in CELL_FACH, CELL_DCH State (Type 2)
Interval Type
3~9
3~9
None
Enumeration Type
TRUE, FALSE
TRUE, FALSE
None
TRUE
Enumeration Type
ON, OFF
ON, OFF
None
ON
None
Interval Type
0~335
0~335
None
None
IP Transmission Introduction on Iub Interface IP Transmission Introduction on Iu Interface IP Transmission Introduction on Iur Interface Interval Type
0~335
None
None
OFF, ON
OFF, ON
None
ON
IP Transmission Introduction on Iub Interface ATM/IP Dual Stack Node B Interval Type IP Transmission Introduction on Iub Interface IP Transmission Introduction on Iu Interface IP Transmission Introduction on Iur Interface Interval Type
0~63
0~63
None
48
0~63
0~63
None
IP Transmission Introduction on Iub Interface IP Transmission Introduction on Iu Interface IP Transmission Introduction on Iur Interface Interval Type
0~63
0~63
None
None
Interval Type
0~27
0~27
None
None
Interval Type
0~27
0~27
None
None
Configuration Management
Enumeration Type
None
NO
None
IP Address Type
None
None
None
IP Address Type
None
None
None
Interval Type
0~335 TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
0~335 TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
None
None
None
None
None
Enumeration Type
1, 4, 5, 8, 10, 16, 20
None
D5
Enumeration Type
D4, D5, D8, D10, D16, D20, D32, D40, D64, D80, D128, D160
4, 5, 8, 10, 16, 20, 32, 40, 64, 80, 128, 160 None
D20
Enumeration Type
D0, D1, D2, D4, D8, D16, D32, D64, 0, 1, 2, 4, 8, 16, 32, D128 64, 128
frame
D32
Enumeration Type
2, 4, 15
slot
D2
Enumeration Type
ON, OFF
ON, OFF
None
ON
Interval Type
1~3600
1~3600
20
Interval Type
60~3600
60~3600
180
Enumeration Type
OFF, ON
None
OFF
Enumeration Type
OFF(switch off), ON_1(switch on1), ON_2(switch on2), OFF, ON_1, ON_2, ON_3(switch on3) ON_3
None
None
Enumeration Type
FORCESHUTDOW N(ForceShutDown), CONDITIONALSH FORCESHUTDOWN, UTDOWN(Conditio CONDITIONALSHUT nalShutDown) DOWN None 0~31(AEUa), 0~335(AOUc)
CONDITIONALS HUTDOWN
None
Interval Type
0~335
None
None
None
Interval Type
0~83
0~83
None
None
UE State in Connected Mode (CELLDCH, CELLPCH, URAPCH, CELLFACH) HSUPA DCCC Dynamic Channel Configuration Control (DCCC) Interval Type
1~10000
10~100000, step: 10
ms
30
UE State in Connected Mode (CELLDCH, CELLPCH, URAPCH, CELLFACH) HSUPA DCCC Dynamic Channel Configuration Control (DCCC) Interval Type
0~1023
0~1023
None
Interval Type
0~384
0~384
kbit/s
UE State in Connected Mode (CELLDCH, CELLPCH, URAPCH, CELLFACH) HSUPA DCCC Dynamic Channel Configuration Control (DCCC) Interval Type
0~1023
0~1023
None
Interval Type
1~8
1~8
None
None
None
Enhanced CELL-FACH
Interval Type
0~5000
dB
500
Enhanced CELL-FACH
Interval Type
1~1000
10~10000, step: 10
ms
100
0~65535
0~65535
ms
30000
0~65535
0~65535
ms
30000
Enhanced CELL-FACH
Interval Type
0~5000
dB
3000
Enhanced CELL-FACH
Interval Type
0~5000
dB
5000
0~49
-24.5~0, step:0.5
dB
41
0~49
dB
41
Faulty Management
Interval Type
1~2147483646
1~2147483646
None
2147483646
Security Management
Compound Type
2000-1-1~2037-12-31 None
None
Faulty Management
Compound Type
2000-1-1~2037-12-31 None
None
Faulty Management
Compound Type
2000-1-1~2037-12-31 None
None
Configuration Management
Interval Type
1~31
1~31
None
Interval Type
1~5000
1~5000
bit
336
Interval Type
1~5000
1~5000
bit
None
Interval Type
1~5000
1~5000
bit
None
Interval Type
1~5000
1~5000
bit
None
Interval Type
1~5000
1~5000
bit
None
Interval Type
1~5000
1~5000
bit
None
Interval Type
1~5000
1~5000
bit
None
Interval Type
1~5000
1~5000
bit
None
Interval Type
1~5000
1~5000
bit
None
Interval Type
1~5000
1~5000
bit
None
Interval Type
1~5000
1~5000
bit
None
Interval Type
1~5000
1~5000
bit
None
Enumeration Type
D1, D2, D3, D4, D5, D6, D7, D8, D9, 1, 2, 3, 4, 5, 6, 7, 8, 9, D10, D11, D12 10, 11, 12 None
D1
HSUPA DCCC
Interval Type
0~1023
0~1023
None
16
HSUPA DCCC
Interval Type
0~1023
0~1023
None
16
HSUPA DCCC Dynamic Channel Configuration Control (DCCC) Bit Field Type
RATE_8KBPS, RATE_16KBPS, RATE_32KBPS, RATE_64KBPS, RATE_128KBPS, RATE_144KBPS, RATE_256KBPS, RATE_384KBPS, RATE_608KBPS, RATE_1440KBPS, RATE_2048KBPS, RATE_2880KBPS, RATE_5740KBPS
8, 16, 32, 64, 128, 144, 256, 384, 608, 1440, 2048, 2880, 5740
None
None
Interval Type
0~5000
dB
None
Interval Type
0~15000
None
None
Interval Type
0~15000
None
None
HSUPA DCCC
Interval Type
0~1023
0~1023
None
HSUPA DCCC
Interval Type
0~1023
0~1023
None
Enumeration Type
EDCH_10MS, EDCH_2MS
EDCH_10MS, EDCH_2MS
None
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~100
0~100
per cent
20
Enhanced CELL-FACH
Interval Type
-350~150
-35~15, step:0.1
dB
10
Enhanced CELL-FACH
Enumeration Type
TRUE, FALSE
TRUE, FALSE
None
None
Enhanced CELL-FACH
Enumeration Type
OFF, ON
OFF, ON
None
None
Inter-RAT Handover Based on Coverage Inter Frequency Hard Handover Based on Enumeration Coverage Type
None
FALSE
Configuration Management
Enumeration Type
DATE(Input with date), WEEK(Input with week), DATEWEEK(Input DATE, WEEK, with date and week) DATEWEEK
None
None
Enumeration Type
OFF, ON
OFF, ON
None
ON
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
OFF
OFF, ON ERR_PFM_5E6(O CCUR:5E-6), ERR_PFM_1E5(O CCUR:1E-5), ERR_PFM_5E5(O CCUR:5E-5), ERR_PFM_1E4(O CCUR:1E-4), ERR_PFM_5E4(O CCUR:5E-4), ERR_PFM_1E3(O CCUR:1E-3), ERR_PFM_5E3(O CCUR:5E-3) JAN(January), FEB(February), MAR(March), APR(April), MAY(May), JUN(June), JUL(July), AUG(August), SEP(September), OCT(October), NOV(November), DEC(December)
OFF, ON
None
OFF
None
None
Configuration Management
Enumeration Type
JAN, FEB, MAR, APR, MAY, JUN, JUL, AUG, SEP, OCT, NOV, DEC None
None
None
IP Address Type
None
None
None
Enumeration Type
None
AUTO
None
Enumeration Type
None
None
Encryption
UEA0~0 UEA1
For each switch of this parameter, the value can be: ON or OFF. None
None
Faulty Management
Interval Type
1~65535
1~65535
None
None
Compound Type
HOUR, MIN
00:00~23:59
min
None
Compound Type
HOUR, MIN
00:00~23:59
min
None
Compound Type
HOUR, MIN
00:00~23:59
min
None
None
Enumeration Type
DISABLED(Prohibit to Use), ENABLED(Availabl DISABLED, e) ENABLED DISABLED(Prohibit to Use), ENABLED(Availabl DISABLED, e) ENABLED
None
None
None
Enumeration Type
None
ENABLED
None
None
None
None
Security Management
Interval Type
1~4294967295
1~4294967295
None
None
Interval Type
1~8
1~8
None
Ethernet OAM
Enumeration Type
O1E3_R5E4(OCCU R:1E-3, RECOVERY:5E-4), O5E4_R1E4(OCCU R:5E-4, RECOVERY:1E-4), O1E4_R5E5(OCCU R:1E-4, RECOVERY:5E-5), O5E5_R1E5(OCCU R:5E-5, RECOVERY:1E-5), O1E5_R5E6(OCCU R:1E-5, RECOVERY:5E-6), O5E6_R1E6(OCCU R:5E-6, RECOVERY:1E-6)
None
O5E4_R1E4
Ethernet OAM
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
OFF
Faulty Management
Interval Type
1~2147483646
1~2147483646
None
2147483646
Interval Type
5000~30000
5000~30000
ms
5000
ms None None
7000
Security Management
Compound Type
None
None
Compound Type
hour, min
00:00~23:59
None
None
None
Enumeration Type
None
None
Security Management
Compound Type
None
Faulty Management
Compound Type
00:00:00~23:59:59
None
None
Faulty Management
Compound Type
00:00:00~23:59:59
None
None
Security Management
Compound Type
year, month, day LOGINEVENT(Logi n Event), MANAGEEVENT(M anagement Event), AUTHEVENT(Auth entication Event), OTHEREVENT(Oth er Event)
2000-1-1~2037-12-31 None
None
Security Management
Enumeration Type
None
None
Security Management
Compound Type
00:00:00~23:59:59
None
None
D16, D32, D64, D128, D256, D512, D1024, D2K, D3K, D4K, D6K, D8K, D12K, D16K, D24K, D32K, D48K, D64K, D96K, D128K, D192K, D256K, D384K, D512K, D768K
16, 32, 64, 128, 256, 512, 1024, 2K, 3K, 4K, 6K, 8K, 12K, 16K, 24K, 32K, 48K, 64K, 96K, 128K, 192K, 256K, 384K, 512K, 768K byte
D1024
D8, D16, D32, D64, D128, D256, D512, D1024, D2K, D3K, D4K, D6K, D8K, D12K, D16K, D24K, D32K, D48K, D64K, D96K, D128K, D192K, D256K, D384K, D512K
8, 16, 32, 64, 128, 256, 512, 1024, 2K, 3K, 4K, 6K, 8K, 12K, 16K, 24K, 32K, 48K, 64K, 96K, 128K, 192K, 256K, 384K, 512K
byte
None
Flow Control
Interval Type
0~1000
0~100, step: 10
ms
50
Flow Control
Interval Type
0~1000
per cent
160
Flow Control
Interval Type
0~1000
per cent
80
Configuration Management
Enumeration Type
SUN(Sunday), MON(Monday), TUE(Tuesday), WED(Wednesday), THU(Thursday), FRI(Friday), SUN, MON, TUE, SAT(Saturday) WED, THU, FRI, SAT None FIRST(First), SECOND(Second), THIRD(Third), FIRST, SECOND, FOURTH(Fourth), THIRD, FOURTH, LAST(Last) LAST
None
Configuration Management
Enumeration Type
None
None
Faulty Management
String Type
None
1~9 characters
V or A
0.02
Faulty Management
String Type
None
1~9 characters
V or A
0.004
Faulty Management
Enumeration Type
None
CURRENT
Faulty Management
String Type
None
1~9 characters
V or A
100
Faulty Management
String Type
None
1~9 characters
V or A
Faulty Management
String Type
None
1~9 characters
V or A
0.02
Faulty Management
String Type
None
1~9 characters
V or A
0.004
Faulty Management
Enumeration Type
None
CURRENT
Faulty Management
String Type
None
1~9 characters
V or A
100
Faulty Management
String Type
None
1~9 characters
V or A
Faulty Management
String Type
None
1~9 characters
V or A
0.02
Faulty Management
String Type
None
1~9 characters
V or A
0.004
Faulty Management
Enumeration Type
None
CURRENT
Faulty Management
String Type
None
1~9 characters
V or A
100
Faulty Management
String Type
None
1~9 characters
V or A
Faulty Management
String Type
None
1~9 characters
V or A
0.02
Faulty Management
String Type
None
1~9 characters
V or A
0.004
Faulty Management
Enumeration Type
None
CURRENT
Faulty Management
String Type
None
1~9 characters
V or A
100
Faulty Management
String Type
None
1~9 characters
V or A
Enumeration Type
D16000
Enumeration Type
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D5000
Interval Type
1~32
1~32
None
None
Interval Type
1~32
1~32
None
None
Interval Type
-350~150
dB
10
Interval Type
-350~150
-35~15, step:0.1
dB
None
Interval Type
-350~150
-35~15, step:0.1
dB
-30
Load Measurement
Enumeration Type
REQUIRE, NOT_REQUIRE
REQUIRE, NOT_REQUIRE
None
REQUIRE
Overload Control
Interval Type
0~30
0~3, step:0.1
dB
Interval Type
0~100
0~100
per cent
None
None
Interval Type
0~100
0~100
per cent
None
1~255
1~255
None
PLUS_1(Current FanSpeed Plus 1), MINUS_1(Current FanSpeed Minus 1) PLUS_1, MINUS_1 HIGH_SPEED, LOW_SPEED HIGH_SPEED, LOW_SPEED
None
None
None
None
Interval Type
55~100
55~100
None
None
Configuration Management
Enumeration Type
CONTINUOUS(Co ntinuous), DISCRETE(Discret e), CONTINUOUS, DUTY_RATIO(Duty DISCRETE, Ratio) DUTY_RATIO NORMAL_FAN(Nor mal Fan), IND_FAN(Independ NORMAL_FAN, ent Fan) IND_FAN
None
None
Configuration Management
Enumeration Type
None
None
Configuration Management
Enumeration Type
NO_SPEED_ADJU STMENT(No Speed Adjustment), HW_AUTO_TEMP ERATURE_CONT ROL(Auto Temperature Control), SPECIFY_RATE(S pecify Rate), SOFTWARE_CON TROL(Software Control)
SOFTWARE_C ONTROL
Enumeration Type
None
None
Enumeration Type
OFF, ON
ON, OFF
None
OFF
None
Enumeration Type
D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, D16k, D24k, D32k, D48k, D64k, D96k, D128k, D192k, D256k, D384k, D512k, D768k
16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k byte
None
OFF(OFF), ON(ON)
OFF, ON
None
None
None
Interval Type
0~1999
0~1999
None
None
Interval Type
0~1999
0~1999
None
Fractional ATM Function on Iub Interface Overbooking on ATM Transmission Interval Type IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface Overbooking on ATM Transmission Interval Type Overbooking on ATM Transmission Interval Type
0~1999
0~1999
None
0~1999
0~1999
None
None
0~1999
0~1999
None
None
None
Interval Type
0~1999
0~1999
None
IP Transmission Introduction on Iub Interface IP Transmission Introduction on Iu Interface IP Transmission Introduction on Iur Interface Interval Type
0~1999
0~1999
None
0~1999
0~1999
None
Overbooking on ATM Transmission Interval Type Overbooking on ATM Transmission Interval Type 2G/3G CoTransmission Resources Management on MBSC
0~1999
0~1999
None
10~1999
10~1999
None
None
Interval Type
0~1999
None
Link aggregation
Enumeration Type
None
16bit
None
Enumeration Type
None
16bit
Flow Control
Enumeration Type
ON, OFF
ON, OFF
None
ON
Enumeration Type
dB
STEPSIZE_1DB
Enumeration Type
None, STTD
None, STTD
None
None
Enumeration Type
None, STTD
None, STTD
None
None
Enumeration Type
None, STTD
None, STTD
None
None
Enumeration Type
None, STTD
None, STTD
None
None
Interval Type
-350~150
-35~15, step:0.1
dB
-30
Interval Type
-350~150
-35~15, step:0.1
dB
-200
Interval Type
0~24
dB
12
Flow Control
Interval Type
1~1000
1~1000
None
String Type
None
1~128 characters
None
None
String Type
None
1~200 characters
None
None
Security Management
String Type
None
0~200 characters
None
None
Configuration Management
String Type
None
0~128 characters
None
None
Faulty Management
Enumeration Type
txt, csv
None
csv
Enumeration Type
D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, 0, 1, 2, 3, 4, 5, 6, 7, 8, D17, D19 9, 11, 13, 15, 17, 19 None
D3
Enumeration Type
D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, 0, 1, 2, 3, 4, 5, 6, 7, 8, D17, D19 9, 11, 13, 15, 17, 19 None
D3
Security Management
Enumeration Type
None
None
D32
MBMS FLC(Frequency Layer Convergence)/F LD(Frequency Layer Enumeration Dispersion) Type IP Transmission Introduction on Iub Interface IP Transmission Introduction on Iu Interface IP Transmission Introduction on Enumeration Iur Interface Type Enumeration None Type Fractional ATM Function on Iub Enumeration Interface Type IMA for E1T1 or Channelized STM-1/OC-3 on Enumeration Iub Interface Type Enumeration Flow Control Type
OFF(OFF), ON(ON)
OFF, ON
None
ON
OFF, ON OFF, ON
None None
ON ON
OFF, ON
None
ON
OFF, ON OFF, ON
None None
None None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
ON
OFF(OFF), ON(ON)
OFF, ON
None
ON
Overbooking on Enumeration IP Transmission Type Overbooking on Enumeration IP Transmission Type Overbooking on ATM Enumeration Transmission Type
OFF, ON
None
ON
OFF, ON
None
ON
OFF(OFF), ON(ON)
OFF, ON
None
ON
Inventory Management
String Type
None
0~128 characters
None
None
None None
None None
None None
Configuration Management
String Type
None
0~128 characters
None
None
License Management
String Type
None
0~100 characters
None
None
OFF, ON
OFF, ON
None
OFF
None
Interval Type
1~30
1~30
ms
FP MUX for IP Transmission UDP MUX for IuCS Transmission Interval Type
128~1024
128~1024
byte
256
None
Interval Type
0~31
0~31
None
None
Fractional ATM Function on Iub Interface ATM Switching Based Hub Enumeration Node B Type
None
None
Security Management
Enumeration Type
None
None
None
Enumeration Type
ONTIME(Fixed Time), DAILY_T(Day Based Scheduling), DAILY_C(Day Based Duration), WEEKLY_T(Week Based Scheduling), WEEKLY_C(Week Based Duration), MONTHLY_T(Mont h Based Scheduling), MONTHLY_C(Mont h Based Duration)
None
None
None
Enumeration Type
None
D128
Security Management
Enumeration Type
TXT, CSV
None
TXT
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Traffic Priority Mapping onto Transmission Resources Interval Type ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~33
0~33
None
None
1~33
1~33
None
None
License Management
PDCP, AMRC, TFOTRFO, INDIRECRETRY, INTERRATDIRECR ETRY, INTERRATREDIRE CT, CBS, CELLID, OTDOA, AGPS, PUC, INTRACELLLDB, INTERCELLLDB, MULTIRAB, HCS, RABDOWNSIZING, QCPE, INTERSERVICEHO , INTERLOADHO, IUQOSRENEG, LCSCZ, HSDPA, IUFLEX, IUBSC, IUBIP, MBMS
PDCP, AMRC, TFOTRFO, INDIRECRETRY, INTERRATDIRECRE TRY, INTERRATREDIREC T, CBS, CELLID, OTDOA, AGPS, PUC, INTRACELLLDB, INTERCELLLDB, MULTIRAB, HCS, RABDOWNSIZING, QCPE, INTERSERVICEHO, INTERLOADHO, IUQOSRENEG, LCSCZ, HSDPA, IUFLEX, IUBSC, IUBIP, MBMS None
None
License Management
WBAMR, HSUPA, RANSHARE, HSDPA3.6M, HSDPA7.2M, ROHC, IURLC, NACC, PSHBUG, IMSIBH, 32HSDPAUPERCE LL, 64HSDPAUPERCE LL, STMTRAONHSDP A, HSDPASTATETRA N, HSDPADRD, ENHANCEDIUFLE X, STMTRAONHSUP A, ATMIPDUALSTAC K, IPTRANINIUR, IPTRANINIU, FRACTIONALIP, IPIUBOVERBOOKI NG, FRACTIONALATM, ATMOVERBOOKIN G, IUBHYBRIDIPTRA N, MBMS8CHANNEL PERCELL, 256KBPSCHNLRA TEONMBMS, MBMSFLCFLD,
WBAMR, HSUPA, RANSHARE, HSDPA3.6M, HSDPA7.2M, ROHC, IURLC, NACC, PSHBUG, IMSIBH, 32HSDPAUPERCELL , 64HSDPAUPERCELL , STMTRAONHSDPA, HSDPASTATETRAN, HSDPADRD, ENHANCEDIUFLEX, STMTRAONHSUPA, ATMIPDUALSTACK, IPTRANINIUR, IPTRANINIU, FRACTIONALIP, IPIUBOVERBOOKIN G, FRACTIONALATM, ATMOVERBOOKING, IUBHYBRIDIPTRAN, MBMS8CHANNELPE RCELL, 256KBPSCHNLRATE ONMBMS, MBMSFLCFLD, VTFTSFIHO, CBIHBUMTSANDGS MGPRS, SRNSRELOCATION, SRNSRWHHANDOV ER None
None
License Management
SRNSRWCUPDAT E, LOSSLESSSRNSR ELCT, INTERFREQHARD HNDV, IMPRVEDWNLNK CVRGE, ACRWHENSPUOV ER, CBWHENIUIFAUL T, 3G2GCOMMON_L OAD, FP_MUX, HSDPA_OVER_IU R, HS_DPCCH_PREA MBLE_SUPPORT, HSUPA_2ms_10m s, HSUPA_5_74MBP S, HSUPA_OVER_IU R, HUB_IUB_OVERB OOKING, IMS_SIGNALING_ OVER_HSPA, DYN_BANDWIDTH _CTROL_IUB_IP, MBMS_OVER_IUR , MBMS_P2P_OVER _HSDPA, MBMS_ENHANCE
SRNSRWCUPDATE, LOSSLESSSRNSREL CT, INTERFREQHARDH NDV, IMPRVEDWNLNKCV RGE, ACRWHENSPUOVE R, CBWHENIUIFAULT, 3G2GCOMMON_LOA D, FP_MUX, HSDPA_OVER_IUR, HS_DPCCH_PREAM BLE_SUPPORT, HSUPA_2ms_10ms, HSUPA_5_74MBPS, HSUPA_OVER_IUR, HUB_IUB_OVERBOO KING, IMS_SIGNALING_OV ER_HSPA, DYN_BANDWIDTH_ CTROL_IUB_IP, MBMS_OVER_IUR, MBMS_P2P_OVER_ HSDPA, MBMS_ENHANCED_ BROADCAST, MBMS_ADMISSION_ ENHANCE, RAN_SHARING_ENH ANCED_PACKAGE, SRB_OVER_HSDPA, SRB_OVER_HSUPA, None
None
DYNAMIC_POWE R_ESTIMATION_F OR_MTCH, ONE_TUNNEL, MULCAR_SWOFF _BASEDON_TRAL OAD, CS_OVER_HSPA, VOIP_OVER_HSP A, 96_HSDPA_USER S_PER_CELL, HSPA_DOWN28_P ER_USER, HSPA_DOWN21_P ER_USER, 96_HSUPA_USER S_PER_CELL, MSCH_SCHEDULI NG, MBMS_CHANNEL, ENHANCED_CELL _FACH, CPC_HS_SCCH, CPC_DTX_DRX, UPLINK_MACRO_ RECEIVE, DOMAIN_ACCESS _CONTROL, SERVICE_IN_RRC , TCP_ACCELERAT OR, UPLINK_CONTRO L_OF_USER, IUR_G_HBL
DYNAMIC_POWER_ ESTIMATION_FOR_ MTCH, ONE_TUNNEL, MULCAR_SWOFF_B ASEDON_TRALOAD, CS_OVER_HSPA, VOIP_OVER_HSPA, 96_HSDPA_USERS_ PER_CELL, HSPA_DOWN28_PE R_USER, HSPA_DOWN21_PE R_USER, 96_HSUPA_USERS_ PER_CELL, MSCH_SCHEDULIN G, MBMS_CHANNEL, ENHANCED_CELL_F ACH, CPC_HS_SCCH, CPC_DTX_DRX, UPLINK_MACRO_RE CEIVE, DOMAIN_ACCESS_C ONTROL, SERVICE_IN_RRC, TCP_ACCELERATO R, UPLINK_CONTROL_ OF_USER, MOCN_PACKAGE, IUCS_UDP_MUX, RNC_NODE_REDUN DANCY, None IUR_G_HBL None
None None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) 2G/3G CoTransmission Resources Management on MBSC Interval Type
0~200000
0~200000
kbit/s
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) 2G/3G CoTransmission Resources Management on MBSC Interval Type
0~200000
0~200000
kbit/s
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) 2G/3G CoTransmission Resources Management on MBSC Interval Type
0~100
0~100
per cent
20
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) 2G/3G CoTransmission Resources Management on MBSC Interval Type
0~100
0~100
per cent
15
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) 2G/3G CoTransmission Resources Management on MBSC Interval Type
0~200000
0~200000
kbit/s
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) 2G/3G CoTransmission Resources Management on MBSC Interval Type
0~100
0~100
per cent
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) 2G/3G CoTransmission Resources Management on MBSC Interval Type
0~200000
0~200000
kbit/s
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) 2G/3G CoTransmission Resources Management on MBSC Interval Type ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) 2G/3G CoTransmission Resources Management on MBSC Interval Type ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) 2G/3G CoTransmission Resources Management on MBSC Interval Type
0~100
0~100
per cent
0~100
0~100
per cent
0~200000
0~200000
kbit/s
Interval Type
1~15
1~15
None
None
Interval Type
0~15
0~15
None
15
BSC/RNC Clock
Enumeration Type
DEG(DEG), SEC(SEC)
DEG, SEC
None
DEG
0, 1
None
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~100
0~100
per cent
70
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~100
0~100
per cent
70
None
Enumeration Type
OFF(Disable the golbal route management), ON(Enable the golbal route management)
OFF, ON
None
None
NBAMR_BITRATE _4.75K, NBAMR_BITRATE _5.15K, NBAMR_BITRATE _5.90K, NBAMR_BITRATE _6.70K, NBAMR_BITRATE _7.40K, NBAMR_BITRATE _7.95K, NBAMR_BITRATE _10.20K, 4.75, 5.15, 5.90, 6.70, NBAMR_BITRATE 7.40, 7.95, 10.20, _12.20K 12.20 kbit/s WBAMR_BITRATE _6.60K, WBAMR_BITRATE _8.85K, WBAMR_BITRATE _12.65K, WBAMR_BITRATE _14.25K, WBAMR_BITRATE _15.85K, WBAMR_BITRATE _18.25K, WBAMR_BITRATE _19.85K, WBAMR_BITRATE _23.05K, 6.60, 8.85, 12.65, WBAMR_BITRATE 14.25, 15.85, 18.25, _23.85K 19.85, 23.05, 23.85
NBAMR_BITRA TE_12.20K
AMR-WB (Adaptive Multi Rate Wide Band) AMR/WB-AMR Speech Rates Enumeration Control Type
kbit/s
WBAMR_BITRA TE_23.85K
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
OFF
Interval Type
1~60
1~60
min
10
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
0~2047
0~2047
None
None
ATM(ATM), IP(IP)
ATM, IP
None
None
Interval Type
0~65535
0~65535
None
None
String Type
None ECHOREPLY, UNREACH, SOURCEQUENCH, REDIRECT, ECHO, ROUTERADVERT, ROUTERSOLICIT, TIMXCEED, PARAMPROB, TSTAMP, TSTAMPREPLY, IREQ, IREQREPLY, MASKREQ, MASKREPLY
1~31 characters
None
None
None
ECHOREPLY, UNREACH, SOURCEQUENCH, REDIRECT, ECHO, ROUTERADVERT, ROUTERSOLICIT, TIMXCEED, PARAMPROB, TSTAMP, TSTAMPREPLY, IREQ, IREQREPLY, MASKREQ, MASKREPLY
None
None
Flow Control
Interval Type
30~100
30~100
per cent
95
Flow Control
Interval Type
30~100
30~100
per cent
95
Flow Control
Interval Type
30~100
30~100
per cent
85
Flow Control
30~100
30~100
per cent
85
Flow Control
ON, OFF
ON, OFF
None
ON
1~512
1~512
None
None
Interval Type
0~5000
0~5000
kbit/s
Enumeration Type
Mode0, Mode1
Mode0, Mode1
None
Mode0
Enumeration Type
D2, D10, D20, D50, D100, D200, D500, 2, 10, 20, 50, 100, D1000 200, 500, 1000
ms
D50
1000~600000
1000~600000
ms
None
None
Enumeration Type
None
None
0~300
0~300
HCS (Hierarchical Cell Structure) Intra RNC Cell Update Inter RNC Cell Update
Interval Type
0~7
0~7
None
Intra RNC Cell Update Inter RNC Cell Update HCS (Hierarchical Cell Structure) Multi Frequency Band Networking Management Interval Type
0~7
0~7
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~100
0~100
per cent
100
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF None
None
Interval Type
0~100
0~100
None
30
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
None
Interval Type
0~100
0~100
None
100
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~100
0~100
per cent
70
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF None
None
Interval Type
0~100
0~100
None
100
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
None
Interval Type
0~100
0~100
None
Interval Type
0~100
0~100
None
30
Interval Type
0~100
0~100
None
100
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~100
0~100
per cent
100
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF None
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF None
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF None
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
None
Interval Type
0~100
0~100
None
30
Interval Type
0~100
0~100
None
100
Interval Type
0~100
0~100
None
30
Interval Type
0~100
0~100
None
100
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~100
0~100
per cent
15
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF None
None
Interval Type
0~100
0~100
None
100
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
None
Interval Type
0~100
0~100
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~100
0~100
per cent
50
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF None
None
Interval Type
0~100
0~100
None
100
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
None
Interval Type
0~100
0~100
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~100
0~100
per cent
100
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF None
None
Interval Type
0~100
0~100
None
100
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
None
Interval Type
0~100
0~100
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~100
0~100
per cent
70
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF None
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
None
None
Interval Type
0~31
0~31
None
None
SRNS Relocation with Hard Handover Bit Field Type Inter Frequency Hard Handover Based on Coverage Inter Frequency Hard Handover Based on DL QoS Intra Frequency Hard Handover RNC Node Enumeration Redundancy Type
None
OFF, ON
OFF, ON
None
None
None
Interval Type
0~167
0~167
None
None
Security Management
Interval Type
1~10
1~10
None
Interval Type
1~10000
1~10000
ms
5000
Interval Type
1~10000
1~10000
ms
5000
0~3
0~3
None
Interval Type
1~10000
1~10000
ms
5000
Inter Frequency Hard Handover Based on Coverage Inter Frequency Hard Handover Based on DL QoS Intra Frequency Hard Handover Interval Type
1~10000
1~10000
ms
5000
1~10000
1~10000
ms
5000
Enumeration Type
None
SingleHost
HSDPA Mobility Management HSUPA Mobility Management Inter Frequency Load Balance Intra Node B Softer Handover Intra Node B Softer Handover Inter RNC Soft Handover Intra Frequency Hard Handover Inter Frequency Hard Handover Based on Coverage Inter-RAT Handover Based on Coverage Inter Frequency Hard Handover Based on DL QoS Inter-RAT Handover Based on Service Inter-RAT Handover Based on Load Bit Field Type
HO_ALGO_HCS_S PEED_EST_SWIT CH, HO_ALGO_LDR_A LLOW_SHO_SWIT CH, HO_ALGO_MBMS _FLC_SWITCH, HO_ALGO_OVERL AY_SWITCH, HO_INTER_FREQ _HARD_HO_SWIT CH, HO_INTER_FREQ _RPRT_2D2F_SWI TCH, HO_INTER_RAT_ CS_OUT_SWITCH , HO_INTER_RAT_P S_3G2G_CELLCH G_NACC_SWITCH , HO_INTER_RAT_P S_3G2G_RELOCA TION_SWITCH, HO_INTER_RAT_P S_OUT_SWITCH, HO_INTER_RAT_ RNC_SERVICE_H O_SWITCH, HO_INTRA_FREQ _DETSET_INTO_A CTSET_SWITCH, HO_INTRA_FREQ
HO_ALGO_HCS_SP EED_EST_SWITCH, HO_ALGO_LDR_ALL OW_SHO_SWITCH, HO_ALGO_MBMS_F LC_SWITCH, HO_ALGO_OVERLA Y_SWITCH, HO_INTER_FREQ_H ARD_HO_SWITCH, HO_INTER_FREQ_R PRT_2D2F_SWITCH, HO_INTER_RAT_CS _OUT_SWITCH, HO_INTER_RAT_PS _3G2G_CELLCHG_N ACC_SWITCH, HO_INTER_RAT_PS _3G2G_RELOCATIO N_SWITCH, HO_INTER_RAT_PS _OUT_SWITCH, HO_INTER_RAT_RN C_SERVICE_HO_SW ITCH, HO_INTRA_FREQ_D ETSET_INTO_ACTS ET_SWITCH, HO_INTRA_FREQ_D ETSET_RPRT_SWIT CH, HO_INTRA_FREQ_H ARD_HO_SWITCH, HO_INTRA_FREQ_R PRT_1J_SWITCH, None
None
-24~0
-24~0
dB
-16
Inter Frequency Hard Handover Based on Coverage Interval Type Inter Frequency Hard Handover Based on Coverage Inter Frequency Hard Handover Based on DL QoS Intra Frequency Hard Handover Interval Type
-115~-25
-115~-25
dB
-92
1~10000
1~10000
ms
5000
None
Interval Type
0~7
0~7
None
None
Admission Control
Interval Type
0~100
None
100
Admission Control
Interval Type
0~100
0~1, step:0.01
per cent
30
Inter-RAT Handover Based on Coverage Inter Frequency Hard Handover Based on Coverage HSDPA Mobility Management HSUPA Mobility Enumeration Management Type
None
TRUE
Admission Control
Interval Type
0~100
None
100
Admission Control
Interval Type
0~100
None
100
Load Measurement
Interval Type
1~32
1~32
None
Load Measurement
Interval Type
1~32
1~32
None
0~65534
0~65534
None
100
0~100
0~100
per cent
60
Admission Control
Interval Type
0~100
None
100
Admission Control
Interval Type
0~100
0~1, step:0.01
per cent
70
License Management
Interval Type
0~8040000
0~8040000
kbit/s
None
Interval Type
0~5
0~5
None
Interval Type
1~5000
1~5000
bit
336
Interval Type
1~5000
1~5000
bit
None
Interval Type
1~5000
1~5000
bit
None
Interval Type
1~5000
1~5000
bit
None
Interval Type
1~5000
1~5000
bit
None
Interval Type
1~5000
1~5000
bit
None
Interval Type
1~5000
1~5000
bit
None
Interval Type
1~5000
1~5000
bit
None
Enumeration Type
None
D1
None
Interval Type
0~5,8~27
0~5, 8~27
None
None
Enumeration Type
E_F_DPCH_OFF, E_F_DPCH_ON
E_F_DPCH_OFF, E_F_DPCH_ON
None
E_F_DPCH_OF F
HSPA+ Downlink 28Mbps per User HSPA+ Downlink 21Mbps per User Downlink 64 QAM 22 MIMO
Enumeration Type
MIMO, 64QAM
MIMO, 64QAM
None
MIMO
Downlink Enhanced L2 Enhanced CELL-FACH Downlink 64 QAM 22 MIMO CPC - DTX / DRX CPC - HSSCCH less operation
None
Interval Type
-500~0
-50~0, step:0.1
dB
0~1024
0~1024
Enumeration Type
FALSE, TRUE
FALSE, TRUE
None
None
Enumeration Type
FALSE, TRUE
FALSE, TRUE
None
None
Enumeration Type
FALSE, TRUE
FALSE, TRUE
None
None
Enumeration Type
FALSE, TRUE
FALSE, TRUE
None
None
15 Codes per Cell HSDPA Static Code Allocation and RNCControlled Dynamic Code Allocation Interval Type
1~15
1~15
None
15 Codes per Cell HSDPA Static Code Allocation and RNCControlled Dynamic Code Allocation Interval Type
1~15
1~15
None
15 Codes per Cell HSDPA Static Code Allocation and RNCControlled Dynamic Code Allocation Interval Type
1~15
1~15
None
Enumeration Type
Minus3.0DB(3.0dB), Minus2.5DB(2.5dB), Minus2.0DB(2.0dB), Minus1.5DB(1.5dB), Minus1.0DB(1.0dB), Minus0.5DB(0.5dB), 0.0DB(0.0dB), 0.5DB(0.5dB), 1.0DB(1.0dB), 1.5DB(1.5dB), 2.0DB(2.0dB), 2.5DB(2.5dB), 3.0DB(3.0dB), 3.5DB(3.5dB), 4.0DB(4.0dB), 4.5DB(4.5dB), 5.0DB(5.0dB), 5.5DB(5.5dB), 6.0DB(6.0dB), 6.5DB(6.5dB), 7.0DB(7.0dB), 7.5DB(7.5dB), 8.0DB(8.0dB), 8.5DB(8.5dB), 9.0DB(9.0dB), 9.5DB(9.5dB), 10.0DB(10.0dB), 10.5DB(10.5dB), 11.0DB(11.0dB),
-3~19, step:0.5
dB
2.5dB
Enumeration Type
None
None
Enumeration Type
None
None
None
Interval Type
0~11
0~11
None
None
HSDPA Introduction Package Code Resource Management Time and HSPDSCH Codes Multiplex Interval Type
1~15
1~15
None
Enumeration Type
D10, D20, D50, D100, D200, D500, 10, 20, 50, 100, 200, D1000 500, 1000
ms
D100
Enumeration Type
D10, D20, D50, D100, D200, D500, 10, 20, 50, 100, 200, D1000 500, 1000
ms
D50
Enumeration Type
D2, D10, D20, D50, D100, D200, D500, 2, 10, 20, 50, 100, D1000 200, 500, 1000
ms
D100
Enumeration Type
D2, D10, D20, D50, D100, D200, D500, 2, 10, 20, 50, 100, D1000 200, 500, 1000
ms
D50
Admission Control
Interval Type
0~100
None
100
HSUPA DCCC
Enumeration Type
D8, D16, D32, D64, D128, D144, D256, D384, D608, D1450, D2048, D2890, D5760
8, 16, 32, 64, 128, 144, 256, 384, 608, 1450, 2048, 2890, 5760
kbit/s
D5760
Admission Control
Enumeration Type
MBR, GBR
MBR, GBR
None
MBR
Inter-RAT Handover Based on Coverage Inter Frequency Hard Handover Based on Coverage HSDPA Mobility Management HSUPA Mobility Enumeration Management Type
None
BasedOnUECap
Admission Control
Interval Type
0~100
None
None
HSUPA DCCC
Enumeration Type
Admission Control
Interval Type
0~100
0~1, step:0.01
per cent
100
Admission Control
Interval Type
0~100
0~1, step:0.01
per cent
100
HSUPA DCCC
Enumeration Type
D8, D16, D32, D64, D128, D144, D256, D384, D608, D1440, D2048, D2880, D5740
8, 16, 32, 64, 128, 144, 256, 384, 608, 1440, 2048, 2880, 5740
kbit/s
D256
Admission Control
Interval Type
0~100
None
100
Admission Control
Interval Type
0~100
0~1, step:0.01
per cent
100
Load Measurement
Interval Type
1~32
1~32
None
0~65534
0~65534
None
100
0~100
0~100
per cent
60
Admission Control
Interval Type
0~100
None
100
License Management
Interval Type
0~8040000
0~8040000
kbit/s
None
Load Measurement
Interval Type
0~100
0~1, step:0.01
per cent
50
Load Measurement
Interval Type
0~100
0~1, step:0.01
per cent
70
Interval Type
0~5
0~5
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF None
None
Interval Type
0~100
0~100
None
30
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
None
Interval Type
0~100
0~100
None
100
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~100
0~100
per cent
100
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF None
None
Interval Type
0~100
0~100
None
100
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
None
Interval Type
0~100
0~100
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~100
0~100
per cent
70
Interval Type
0~100
0~100
None
30
Interval Type
0~100
0~100
None
100
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~100
0~100
per cent
100
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF None
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF None
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF None
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
None
Interval Type
0~100
0~100
None
30
100
Faulty Management
String Type
None
1~9 characters
per cent
80
Faulty Management
String Type
None
1~9 characters
per cent
10
Interval Type
0~100
0~100
None
30
Interval Type
0~100
0~100
None
100
None
Interval Type
0~335
0~335
None
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF None
None
Interval Type
0~100
0~100
None
100
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
None
Interval Type
0~100
0~100
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~100
0~100
per cent
15
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF None
None
Interval Type
0~100
0~100
None
100
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
None
Interval Type
0~100
0~100
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~100
0~100
per cent
50
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF None
None
Interval Type
0~100
0~100
None
100
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
None
Interval Type
0~100
0~100
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~100
0~100
per cent
100
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF None
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~100
0~100
per cent
70
None
Interval Type
32~65535
32~65535
None
None
None
Interval Type
0~4095
0~4095
None
None
Interval Type
0~15
0~7.5, step:0.5
dB
Interval Type
0~15
0~7.5, step:0.5
dB
Interval Type
0~15
0~7.5, step:0.5
dB
Interval Type
0~15
0~7.5, step:0.5
dB
Interval Type
0~15
0~7.5, step:0.5
dB
Intra Node B Softer Handover Inter RNC Soft Handover Inter Frequency Hard Handover Based on Coverage Interval Type
0~15
0~7.5, step:0.5
dB
0~29
0~14.5, step:0.5
dB/ dBm
Interval Type
0~29
0~14.5, step:0.5
dB
0~29
0~14.5, step:0.5
dB/ dBm
Interval Type
0~29
0~14.5, step:0.5
dB/ dBm
0~29
0~14.5, step:0.5
dB/ dBm
Interval Type
0~29
0~14.5, step:0.5
dB/ dBm
Interval Type
0~15
0~7.5, step:0.5
dB
Inter-RAT Handover Based on Service Inter-RAT Handover Based on Load Interval Type
0~15
0~7.5, step:0.5
dB
Interval Type
0~15
0~7.5, step:0.5
dB
0~29
0~14.5, step:0.5
dB/ dBm
Interval Type
180~1260
180~1260
720
Interval Type
60~600
60~600
90
44~1024
44~1024
byte
64
None
Interval Type
1~30
1~30
None
None
None
Interval Type
1~30,100~32767
1~30, 100~32767
None
None
Enumeration Type
BARRED, NOT_BARRED
BARRED, NOT_BARRED
None
None
Enumeration Type
ALLOWED, NOT_ALLOWED
ALLOWED, NOT_ALLOWED
None
ALLOWED
Intra RNC Cell Update Inter RNC Cell Update Multi Frequency Band Networking Management Interval Type
0~20
0~40, step:2
dB
Intra RNC Cell Update Inter RNC Cell Update Multi Frequency Band Networking Management Interval Type
0~20,255
dB
Interval Type
-50~50
-50~50
dB
Interval Type
-50~50
-50~50
dB
Intra RNC Cell Update Inter RNC Cell Update Multi Frequency Band Networking Management Interval Type
-16~10,127
dB
Intra RNC Cell Update Inter RNC Cell Update Multi Frequency Band Networking Management Interval Type
-16~10,127
dB
Enumeration Type
D320
Interval Type
100~30000
10000~30000(UNI), 100~30000(NNI)
ms
None
0~120
0~120
30
3GPP Specifications
Interval Type
5000~30000
5000~30000
ms
20000
None
Interval Type
0~31
0~31
None
None
None
Interval Type
0~167
None
None
None
Interval Type
0~255
0~255
None
None
ATM Switching Based Hub Node B IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface Interval Type ATM Switching Based Hub Node B IMA for E1T1 or Channelized STM-1/OC-3 on Enumeration Iub Interface Type
0~335
0~335
None
None
V1.0(V1.0), V1.1(V1.1)
V1.0, V1.1
None
V1.1
OFF, ON
OFF, ON
None
OFF
Enumeration Type
DCH(UL_DCH,DL_ DCH), HSDPA(UL_DCH,D L_HSDSCH), HSPA(UL_EDCH,D L_HSDSCH) DCH, HSDPA, HSPA None
DCH
Enhanced CELL-FACH
Interval Type
1~1000
1~1000
kbit/s
32
String Type
None
None
None
String Type
None
None
None
3.4/6.8/13.6/27. 2 kbit/s RRC Connection and RAB Enumeration Assignment Type RAN Sharing Introduction Package MOCN Introduction Package RAN Sharing Introduction Package MOCN Introduction Package
D32, D64
32, 64
kbit/s
D32
Interval Type
0~999
0~999
None
None
Interval Type
0~999
0~999
None
None
Enhanced CELL-FACH
Interval Type
1~2000
1~2000
kbit/s
512
Enumeration Type
None
None
Enumeration Type
D0, D1, D2, D4, D8, D16, D32, D64, 0, 1, 2, 4, 8, 16, 32, D128, D256, D512 64, 128, 256, 512
None
D4
D0, D1, D2, D4, D8, D16, D32, D64, 0, 1, 2, 4, 8, 16, 32, D128, D256 64, 128, 256 CLOSE(Close), OPEN(Open) CLOSE, OPEN
None None
None OPEN
Interval Type
1200~2000
1200~2000
ms
1500
Integrity Protection
UIA1
For each switch of this parameter, the value can be: ON or OFF. None
None
Enhanced CELL-FACH
Interval Type
1~1000
1~1000
kbit/s
32
Enhanced CELL-FACH
Interval Type
1~2000
kbit/s
512
None
Interval Type
-24~0
-24~0
dB
-16
-24~0
-24~0
dB
-14
-115~-25
-115~-25
dBm
-95
-24~0
-24~0
dB
-12
-115~-25
-115~-25
dBm
-92
0~100
0~100
None
80
Inter Frequency Hard Handover Based on Coverage Inter Frequency Hard Handover Based on DL QoS HCS (Hierarchical Enumeration Cell Structure) Type
D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, 0, 1, 2, 3, 4, 5, 6, 7, 8, D17, D19 9, 11, 13, 15, 17, 19 None
D3
Inter Frequency Hard Handover Based on Coverage Inter-RAT Handover Based on Enumeration Coverage Type
INTER_FREQ_CO V(Coverage-based inter-frequency handover), INTER_FREQ_CO V_NCOV(Coveragebased and noncoverage-based inter-RAT handover), INTER_FREQ_TA( INTER_FREQ_COV, Traffic-based inter- INTER_FREQ_COV_ frequency NCOV, handover) INTER_FREQ_TA None
INTER_FREQ_C OV
-24~0
-24~0
dB
-14
-115~-25
-115~-25
dBm
-95
-24~0
-24~0
dB
-12
-115~-25
-115~-25
dBm
-92
Load Measurement
Enumeration Type
INTER_FREQ_A ND_INTER_RAT
CPICH_EC/NO
Inter Frequency Hard Handover Based on Coverage Inter Frequency Hard Handover Based on DL QoS HCS (Hierarchical Cell Structure) Interval Type
0~512
0~512
60
0~512
0~512
Enumeration Type
OFF, ON
OFF, ON
None
OFF
Interval Type
-24~0
-24~0
dB
-16
-24~0
-24~0
dB
-14
-115~-25
-115~-25
dBm
-95
-24~0
-24~0
dB
-12
-115~-25
-115~-25
dBm
-92
Inter Frequency Hard Handover Based on Coverage Inter-RAT Handover Based on Enumeration Coverage Type
INTERFREQ(interfrequency handover only), INTERRAT(interRAT handover only), SIMINTERFREQR AT(inter-frequency INTERFREQ, and inter-RAT INTERRAT, handover) SIMINTERFREQRAT None
SIMINTERFREQ RAT
PERIODICAL_REP ORTING(Periodical reporting), PERIODICAL_REPO EVENT_TRIGGER( RTING, Event trigger) EVENT_TRIGGER None
PERIODICAL_R EPORTING
PERIODICAL_REP ORTING(Periodical reporting), PERIODICAL_REPO EVENT_TRIGGER( RTING, Event trigger) EVENT_TRIGGER None
EVENT_TRIGG ER
Interval Type
4~19,255
None
255
0~100
0~100
None
80
Mobility Control and Service Differentiation Dedicated Carrier for Each Operator MOCN Introduction Package MOCN Mobility Enumeration Management Type
NO, YES
NO, YES
None
YES
Mobility Control and Service Differentiation Dedicated Carrier for Each Operator MOCN Introduction Package MOCN Mobility Enumeration Management Type Inter-RAT Handover Based on Coverage
NO, YES
NO, YES
None
YES
CSAMR_INTERRA T CSAMR_INTERRAT
None
None
Interval Type
-24~0
-24~0
dB
-14
Interval Type
-115~-25
-115~-25
dBm
-100
Interval Type
-24~0
-24~0
dB
-12
Interval Type
-115~-25
-115~-25
dBm
-97
Interval Type
0~100
0~100
None
80
Inter-RAT Handover Based on Coverage Inter-RAT Handover Based on Service Inter-RAT Handover Enumeration Based on Load Type
D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, 0, 1, 2, 3, 4, 5, 6, 7, 8, D17, D19 9, 11, 13, 15, 17, 19 None
D3
Inter-RAT Handover Based on Service Inter-RAT Handover Based on Load Interval Type
1~16
1~16
None
16
Cell ID + RTT Function Based LCS OTDOA Based LCS A-GPS Based Enumeration LCS Type
NO, YES
NO, YES
None
None
Interval Type
0~63
lower than -110, 110~-48(Actual value meets the condition: Actual Value = GUI Value - 111) dBm
21
Cell ID + RTT Function Based LCS OTDOA Based LCS A-GPS Based Enumeration LCS Type
DRD, MEAS_BASED
None
Interval Type
-24~0
-24~0
dB
-15
Interval Type
-115~-25
-115~-25
dBm
-110
Interval Type
-24~0
-24~0
dB
-13
Interval Type
-115~-25
-115~-25
dBm
-107
Inter-RAT Handover Based on Coverage Inter-RAT Handover Based on DL QoS Inter-RAT Handover Based on Service Inter-RAT Handover Based on Load Interval Type
0~512
0~512
60
Interval Type
0~512
0~512
Enumeration Type
OFF, ON
OFF, ON
None
OFF
Inter-RAT Handover Based on Service Inter-RAT Handover Based on Load Interval Type
0~63
lower than -110, 110~-48(Actual value meets the condition: Actual Value = GUI Value - 111) dBm
21
Inter-RAT Handover Based on Service Inter-RAT Handover Based on Load Interval Type
0~63
lower than -110, 110~-48(Actual value meets the condition: Actual Value = GUI Value - 111) dBm
21
Enumeration Type
NON_PERIODIC_R EPORT(Non periodical reporting), D250~1 D500~2 D1000~3 D2000~4 D3000~5 D4000~6 D6000~7 D8000~8 D12000~9 D16000~10 D20000~11 D24000~12 D28000~13 D32000~14 D64000
NON_PERIODIC_RE PORT, 250, 500, 1000, 2000, 3000, 4000, 6000, 8000, 12000, 16000, 20000, 24000, 28000, 32000, 64000 ms
D1000
Inter-RAT Handover Based on Service Inter-RAT Handover Based on Load Interval Type
0~63
0~63
None
Interval Type
0~15
0~7.5, step:0.5
dBm
Interval Type
0~65535
0~65535
Interval Type
-24~0
-24~0
dB
-15
Interval Type
-115~-25
-115~-25
dBm
-110
Interval Type
-24~0
-24~0
dB
-13
Interval Type
-115~-25
-115~-25
dBm
-107
Enumeration Type
PERIODICAL_REP ORTING(Periodical reporting), PERIODICAL_REPO EVENT_TRIGGER( RTING, Event trigger) EVENT_TRIGGER None
PERIODICAL_R EPORTING
Enumeration Type
PERIODICAL_REP ORTING(Periodical reporting), PERIODICAL_REPO EVENT_TRIGGER( RTING, Event trigger) EVENT_TRIGGER None
EVENT_TRIGG ER
Interval Type
4~19,255
None
255
Interval Type
0~100
0~100
None
80
Security Management
Interval Type
1~240
1~240
72
None
Interval Type
1~10
1~10
Intra Node B Softer Handover Inter RNC Soft Handover Inter Frequency Hard Handover Based on Coverage Interval Type
-24~0
-24~0
dB
-24
Intra Node B Softer Handover Inter RNC Soft Handover Inter Frequency Hard Handover Based on Coverage Interval Type
-115~-25
-115~-25
dBm
-115
Enumeration Type
D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, 0, 1, 2, 3, 4, 5, 6, 7, 8, D17, D19 9, 11, 13, 15, 17, 19 None
D3
1~86400
1~86400
1800
Load Measurement
Enumeration Type
REQUIRE, NOT_REQUIRE
REQUIRE, NOT_REQUIRE
None
REQUIRE
Enumeration Type
CPICH_EC/NO, CPICH_RSCP
CPICH_EC/NO, CPICH_RSCP
None
CPICH_EC/NO
Enumeration Type
OFF, ON
OFF, ON
None
OFF
Load Based GSM and UMTS Handover Enhancement Enumeration Based on Iur-g Type Cell ID + RTT Function Based LCS Interval Type
FALSE, TRUE
TRUE, FALSE
None
None
0~29
dB
None
Interval Type
0~29
0~14.5, step:0.5
dB
Interval Type
0~29
0~14.5, step:0.5
dB
Intra Node B Softer Handover Inter RNC Soft Handover Interval Type Cell ID + RTT Function Based LCS Interval Type
0~29
0~14.5, step:0.5
dB
0~29
dB
None
Interval Type
0~29
0~14.5, step:0.5
dB
12
Interval Type
0~29
0~14.5, step:0.5
dB
12
Interval Type
0~29
0~14.5, step:0.5
dB
12
3GPP Specifications
Interval Type
15000~120000
15000~120000
ms
60000
None
Interval Type
1~1440
1~1440
min
30
None
Interval Type
30~1024
30~1024
None
IP Address Type
None
None
IP Transmission Introduction on Iub Interface Hybrid Iub IP Transmission ATM/IP Dual Stack Node B IP-Based 2G/3G CoTransmission on Base Station Side IP-Based 2G/3G CoTransmission on MBSC Side TDM-Based 2G/3G CoTransmission via Backplane on Base Station IP Address Side Type IP Address Type
None
None
None
None
None
IP-Based 2G/3G CoTransmission on MBSC Side IP Transmission Introduction on Iub Interface IP Transmission Introduction on Iu Interface IP Transmission Introduction on IP Address Iur Interface Type
None
None
IP Address Type
None
None
IP Address Type
None
None
None
IP Address Type
None
None
None
IP Address Type
None
None
None
None
None
None
None
None
IP Transmission Introduction on Iub Interface IP Transmission Introduction on Iu Interface IP Transmission Introduction on Enumeration Iur Interface Type
UDP/IP_HC
Link aggregation
Enumeration Type
UDP/IP_HC
IP Transmission Introduction on Iub Interface IP Transmission Introduction on Iu Interface IP Transmission Introduction on Iur Interface Interval Type
0~5
0~5
None
None
IP Transmission Introduction on Iub Interface IP Transmission Introduction on Iu Interface IP Transmission Introduction on Iur Interface Interval Type
0~5
0~5
None
None
None
Enumeration Type
None
None
Link aggregation
Interval Type
0~988
0~988
None
None
DHCP
Interval Type
0~12999
0~12999
None
None
DHCP
Interval Type
0~5,8~27
0~5, 8~27
None
None
FP MUX for IP Transmission UDP MUX for IuCS Transmission Interval Type
0~11
0~11
None
None
Enumeration Type
None
None
Enumeration Type
BARRED, NOT_BARRED
BARRED, NOT_BARRED
None
NOT_BARRED
Enumeration Type
BARRED, NOT_BARRED
BARRED, NOT_BARRED
None
NOT_BARRED
Enumeration Type
BARRED, NOT_BARRED
BARRED, NOT_BARRED
None
NOT_BARRED
Enumeration Type
BARRED, NOT_BARRED
BARRED, NOT_BARRED
None
NOT_BARRED
Enumeration Type
BARRED, NOT_BARRED
BARRED, NOT_BARRED
None
NOT_BARRED
Enumeration Type
BARRED, NOT_BARRED
BARRED, NOT_BARRED
None
NOT_BARRED
Enumeration Type
BARRED, NOT_BARRED
BARRED, NOT_BARRED
None
NOT_BARRED
Enumeration Type
BARRED, NOT_BARRED
BARRED, NOT_BARRED
None
NOT_BARRED
Enumeration Type
BARRED, NOT_BARRED
BARRED, NOT_BARRED
None
NOT_BARRED
Enumeration Type
BARRED, NOT_BARRED
BARRED, NOT_BARRED
None
NOT_BARRED
Enumeration Type
BARRED, NOT_BARRED
BARRED, NOT_BARRED
None
NOT_BARRED
Enumeration Type
BARRED, NOT_BARRED
BARRED, NOT_BARRED
None
NOT_BARRED
Enumeration Type
BARRED, NOT_BARRED
BARRED, NOT_BARRED
None
NOT_BARRED
Enumeration Type
BARRED, NOT_BARRED
BARRED, NOT_BARRED
None
NOT_BARRED
Enumeration Type
BARRED, NOT_BARRED
BARRED, NOT_BARRED
None
NOT_BARRED
Enumeration Type
BARRED, NOT_BARRED
BARRED, NOT_BARRED
None
NOT_BARRED
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
None
None
FALSE, TRUE
FALSE, TRUE
None
FALSE
License Management
Enumeration Type
None
YES
DHCP
Enumeration Type
None
None
Enumeration Type
NO, YES
None
None
Configuration Management
Enumeration Type
None
None
Hybrid Iub IP Transmission ATM/IP Dual Stack Node B Overbooking on IP Transmission Traffic Priority Mapping onto Transmission Enumeration Resources Type
IUB(Iub Interface), IUR(Iur Interface), IUCS(Iu-CS Interface), IUPS(IuPS Interface) IUB, IUR, IUCS, IUPS None
None
Interval Type
1~3600
1~3600
Overload Control
Interval Type
0~10
0~10
None
Overload Control
Interval Type
0~10
0~10
None
3GPP Specifications
Interval Type
1~65535
1~65535
300
Flow Control
Interval Type
0~100
0~100
None
70
Enumeration Type
ON, OFF
ON, OFF
None
ON
Interval Type
1~65535
1~65535
300
OFF, ON
OFF, ON
None
OFF
Flow Control
Interval Type
30~100
30~100
per cent
95
Flow Control
Interval Type
30~100
30~100
per cent
95
Flow Control
Interval Type
30~100
30~100
per cent
85
Flow Control
Interval Type
30~100
30~100
per cent
85
Flow Control SRNS Relocation Introduction Package Inter RNC Soft Handover RNC Node Redundancy
Enumeration Type
ON, OFF
ON, OFF
None
ON
Enumeration Type
TRUE, FALSE
TRUE, FALSE
None
None
Flow Control
Interval Type
30~100
30~100
per cent
60
Flow Control
Interval Type
30~100
30~100
per cent
75
Flow Control
Interval Type
30~100
30~100
per cent
50
Flow Control
Interval Type
30~100
30~100
per cent
65
Flow Control
Enumeration Type
ON, OFF
ON, OFF
None
ON
OFF, ON
OFF, ON
None
OFF
OFF, ON
OFF, ON
None
OFF
Flow Control
Interval Type
30~100
30~100
per cent
95
Flow Control
Interval Type
30~100
30~100
per cent
95
Flow Control
Interval Type
30~100
30~100
per cent
85
Flow Control
Interval Type
30~100
30~100
per cent
85
Flow Control
Enumeration Type
ON, OFF
ON, OFF
None
ON
Enumeration Type
None
IUCS_IUPS
FP MUX for IP Transmission UDP MUX for IuCS Enumeration Transmission Type
Hexadecimal(Hex decimal), Character_String(C Hexadecimal, haracter String) Character_String Hexadecimal(Hex decimal), Character_String(C Hexadecimal, haracter String) Character_String
None
Character_String
None
Enumeration Type
None
Character_String
None
Enumeration Type
None
None
String Type
None
0~124 characters
None
None
None
Enumeration Type
None
Character_String
None
Enumeration Type
None
None
String Type
None
0~124 characters
None
None
None
Enumeration Type
None
None
Enumeration Type
Hexadecimal(Hex decimal), Character_String(C Hexadecimal, haracter String) Character_String Hexadecimal(Hex decimal), Character_String(C Hexadecimal, haracter String) Character_String
none
Character_String
None
Enumeration Type
None
Character_String
None
Enumeration Type
None
None
String Type
None
0~124 characters
None
None
None
Enumeration Type
None
Character_String
None
Enumeration Type
None
None
String Type
None
0~124 characters
None
None
None
Enumeration Type
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
None
None
Enumeration Type
None
None
ATM over Channelized STM-1/OC-3 Enumeration on Iub Interface Type ATM over Channelized STM-1/OC-3 on Iub Interface String Type
None
None
None
0~64 characters
None
None
None
String Type
None
0~64 characters
None
None
None
Enumeration Type
ZERO(zero), SPACE(space)
ZERO, SPACE
None
None
None
Enumeration Type
NOT-INDICATEEND(NOTINDICATE-END), INDICATEEND(INDICATEEND)
None
None
Interval Type
1~30
1~30
Interval Type
ms
None
3.4/6.8/13.6/27. 2 kbit/s RRC Connection and RAB Enumeration Assignment Type 3.4/6.8/13.6/27. 2 kbit/s RRC Connection and RAB Enumeration Assignment Type
D1, D2, D3, D4, D5, D6, D7, D8, D9, D1, D2, D3, D4, D5, D10 D6, D7, D8, D9, D10
None
D6
OFF, ON
OFF, ON
None
ON
1~65533,65535
{1~65533}, {65535}
None
None
None
Enumeration Type
None
BSC/RNC Clock
Interval Type
degree
None
BSC/RNC Clock
String Type
None
None
Link aggregation
Interval Type
1~100
100~10000, step:100 ms
None
Interval Type
0~100
0~100
None
None
Interval Type
0~10000
0~10000
ms
25
None
Interval Type
0~15
0~15
None
None
Interval Type
0~15
0~15
None
None
Enumeration Type
None
None
Load Measurement
Interval Type
1~32
1~32
None
Enumeration Type
Power, UserNumber
Power, UserNumber
None
UserNumber
Enumeration Type
UserNumber, Power
Power, UserNumber
None
UserNumber
Interval Type
0~100
0~100
per cent
35
Interval Type
0~100
0~100
per cent
35
HSDPA DRD
Interval Type
0~100
0~100
per cent
100
HSDPA DRD
Interval Type
0~100
0~100
per cent
100
Interval Type
0~100
0~100
per cent
10
HSDPA DRD
Interval Type
0~100
0~100
per cent
10
Enumeration Type
ON, OFF
ON, OFF
None
OFF
Enumeration Type
ON, OFF
ON, OFF
None
OFF
HSDPA DRD
Enumeration Type
ON, OFF
ON, OFF
None
OFF
HSDPA DRD
Enumeration Type
ON, OFF
ON, OFF
None
OFF
Interval Type
0~100
0~100
per cent
30
None
Enumeration Type
OFF, ON
OFF, ON
None
None
Load Reshuffling
Enumeration Type
FALSE(FALSE), TRUE(TRUE)
FALSE, TRUE
None
FALSE
Load Reshuffling
Interval Type
0~100
0~1, step:0.01
per cent
13
Load Reshuffling
Enumeration Type
IUBLDR(Iub load reshuffling), CODELDR(Code load reshuffling), UULDR(Uu load reshuffling), CREDITLDR(Credit IUBLDR, CODELDR, load reshuffling) UULDR, CREDITLDR None
IUBLDR
Load Reshuffling
Enumeration Type
IUBLDR(Iub load reshuffling), CODELDR(Code load reshuffling), UULDR(Uu load reshuffling), CREDITLDR(Credit IUBLDR, CODELDR, load reshuffling) UULDR, CREDITLDR None
UULDR
Load Reshuffling
Interval Type
1~86400
1~86400
10
Load Reshuffling
Enumeration Type
IUBLDR(Iub load reshuffling), CODELDR(Code load reshuffling), UULDR(Uu load reshuffling), CREDITLDR(Credit IUBLDR, CODELDR, load reshuffling) UULDR, CREDITLDR None
CREDITLDR
Load Reshuffling
Enumeration Type
IUBLDR(Iub load reshuffling), CODELDR(Code load reshuffling), UULDR(Uu load reshuffling), CREDITLDR(Credit IUBLDR, CODELDR, load reshuffling) UULDR, CREDITLDR None
CODELDR
ATM/IP Dual Stack Node B RAN Sharing Phase 2 Traffic Priority Mapping onto Transmission Resources
Interval Type
1~63
1~63
None
None
Interval Type
0~63
0~63
None
None
RAN Sharing Phase 2 Traffic Priority Mapping onto Transmission Resources RAN Sharing Phase 2 Traffic Priority Mapping onto Transmission Resources
Interval Type
0~63
0~63
None
None
Interval Type
0~63
0~63
None
None
0~186 0~186 CRITICAL(Critical), MAJOR(Major), CRITICAL, MAJOR, MINOR(Minor) MINOR INFO(Information Level), WARN(Warn Level), ERR(Error Level), AST(Assert INFO, WARN, ERR, Level) AST ON(ON), OFF(OFF) ON, OFF
None
None
None
None
None None
None None
None None
None
Interval Type
0~7
0~7
None
None
Interval Type
0~31
0~31
None
None
Configuration Management
Enumeration Type
OAM, UCP, RUCP, OAM, UCP, RUCP, UUP, ATM, IP, SAU UUP, ATM, IP, SAU
None
None
None IP IP
Faulty Management
Interval Type
90~99
90~99
per cent
90
Faulty Management
Interval Type
70~95
70~95
per cent
70
None
Interval Type
0~167
0~167
None
None
Inter-RAT Handover Based on Coverage Inter Frequency Hard Handover Based on Enumeration Coverage Type
D8, D16, D32, D64, 8, 16, 32, 64, 128, D128, D256 256
None
None
kbit/s
D64
String Type
None
0~9 characters
None
10
None
Enumeration Type
TS1(Time_slot_1), TS2(Time_slot_2), TS3(Time_slot_3), TS4(Time_slot_4), TS5(Time_slot_5), TS6(Time_slot_6), TS7(Time_slot_7), TS8(Time_slot_8), TS9(Time_slot_9), TS10(Time_slot_10 ), TS11(Time_slot_11 ), TS12(Time_slot_12 ), TS13(Time_slot_13 ), TS14(Time_slot_14 ), TS15(Time_slot_15 ), TS16(Time_slot_16 ), TS17(Time_slot_17 ), TS18(Time_slot_18 ), TS19(Time_slot_19 ), TS20(Time_slot_20 ), TS21(Time_slot_21 ), TS22(Time_slot_22 ),
TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
None
None
None
Enumeration Type
None
None
M3UA_MASTER _MOD
Enumeration Type
B0000(B0000), B0001(B0001), B0010(B0010), B0011(B0011), B0100(B0100), B0101(B0101), B0110(B0110), B0111(B0111), B1000(B1000), B1001(B1001), B1010(B1010), B1011(B1011), B1100(B1100), B1101(B1101), B1110(B1110), B1111(B1111)
B0000, B0001, B0010, B0011, B0100, B0101, B0110, B0111, B1000, B1001, B1010, B1011, B1100, B1101, B1110, B1111
None
B1111
B0000(B0000), B0001(B0001), B0010(B0010), B0011(B0011), B0100(B0100), B0101(B0101), B0110(B0110), B0111(B0111), B1000(B1000), B1001(B1001), B1010(B1010), B1011(B1011), B1100(B1100), B1101(B1101), B1110(B1110), B1111(B1111)
B0000, B0001, B0010, B0011, B0100, B0101, B0110, B0111, B1000, B1001, B1010, B1011, B1100, B1101, B1110, B1111
None
B1111
None
Enumeration Type
None
None
None
Enumeration Type
None
OFF(OFF), ON(ON)
OFF, ON
None
OFF
None
IP Address Type
None
None
None
IP Address Type
None
None
None
IP Address Type
None
None
3GPP Specifications
Interval Type
0~268435455
0~268435455
None
None
Faulty Management
String Type
None
1~200 characters
None
None
IP Transmission Introduction on Iub Interface ATM/IP Dual Stack Node B IP-Based 2G/3G CoTransmission on Base Station Side IP-Based 2G/3G CoTransmission on MBSC Side TDM-Based 2G/3G CoTransmission via Backplane on Base Station IP Address Side Type
None
None
IP Transmission Introduction on Iub Interface ATM/IP Dual IP Address Stack Node B Type
None
None
Security Management
Enumeration Type
OFF(Unlock), ON(Lock)
OFF, ON
None
ON
IP Transmission Introduction on Iub Interface ATM/IP Dual Stack Node B Interval Type
1024~65535
None
None
Configuration Management
Enumeration Type
LFB, CL
None
None
Flow Control
Interval Type
30~100
30~100
per cent
90
Flow Control
Interval Type
30~100
30~100
per cent
90
None
None
0~988
0~988
None
None
0~5,8~27
0~5, 8~27
None
None
Flow Control
Interval Type
30~100
30~100
per cent
80
Flow Control
30~100
30~100
per cent
80
Flow Control
ON, OFF PFM_RESULT, HOST_PFM_RESU LT, ACTIVE_DEF_MEA S_FILE, STANDBY_DEF_M EAS_FILE, PFM_SWITCHS, HISTORY_ALARM, HISTORY_FAULT, ALM_SYSTEM_CF G, SECURITY_LOG, OPT_LOG, OMU_LOG, BSC_CFG_MML, CELL_BASIC_INF O, BSC_SERIES_NO, DB_BAK, MEM_DB_BAK, DEBUG_LOG, LAST_WORD, DSP_DEBUG_LOG , HOST_LOG, 3G_CHR_LOG, BSC_INFO, BIOS_LOG
ON, OFF
None
ON
None
PFM_RESULT, HOST_PFM_RESUL T, ACTIVE_DEF_MEAS _FILE, STANDBY_DEF_ME AS_FILE, PFM_SWITCHS, HISTORY_ALARM, HISTORY_FAULT, ALM_SYSTEM_CFG, SECURITY_LOG, OPT_LOG, OMU_LOG, BSC_CFG_MML, CELL_BASIC_INFO, BSC_SERIES_NO, DB_BAK, MEM_DB_BAK, DEBUG_LOG, LAST_WORD, DSP_DEBUG_LOG, HOST_LOG, 3G_CHR_LOG, BSC_INFO, BIOS_LOG None
None
BSC/RNC Clock
Interval Type
degree
None
BSC/RNC Clock
String Type
None
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
None
None
Enumeration Type
NO_LOOP(No loop), REMOTE_LOOP(R emote loop), LINE_REM_LOOP( Line remote loop), LOCAL_LOOP(Loc al loop), PAYLOAD_LOOP( payload loop), SIN_CHN_LOC(sin gle channel local loop), SIN_CHN_REM(sin gle channel remote loop)
None
None
Enumeration Type
NO_LOOP(NO_LO OP), LOCAL_LOOP(LO CAL_LOOP), NO_LOOP, REMOTE_LOOP(R REMOTE_LOOP, EMOTE_LOOP) LOCAL_LOOP NO_LOOP(No loop), LOCAL_LOOP(Loc NO_LOOP, al loop) LOCAL_LOOP
None
None
None
Enumeration Type
None
None
1~100
1~100
None
0~988
0~988
None
None
None
Interval Type
0~7
0~7
None
None
None
Interval Type
0~499,512~767
0~499, 512~767
None
None
0~988,1024~1535
None
None
Interval Type
0~499
0~499
None
None
0~5,8~27
0~5, 8~27
None
None
None
Enumeration Type
Hub(Hub), Leaf(Leaf)
Hub, Leaf
None
None
System Redundancy
Interval Type
30~100
30~100
per cent
90
System Redundancy
Interval Type
30~100
30~100
per cent
75
System Redundancy
Interval Type
30~100
30~100
per cent
80
System Redundancy
Interval Type
30~100
30~100
per cent
65
0~5,8~27
0~5, 8~27
None
None
None
Interval Type
0~11
0~11
None
None
Security Management
Enumeration Type
EXCLUDE(Exclude List Command), INCLUDE(Include List Command) EXCLUDE, INCLUDE None HORIZONTAL(HO RIZONTAL), VERTICAL(VERTIC HORIZONTAL, AL) VERTICAL APPLICATION(App lication Program), SCNDCPU_PROG( Secondary Thread Program), BOOTROM(BOOT ROM Program), DATA(Data file), DSP(DSP Program), FAN(Fan Program)
None
Configuration Management
Enumeration Type
None
HORIZONTAL
Enumeration Type
None
APPLICATION
Security Management
Enumeration Type
OPTLOG(Operatio n Log), SECLOG(Security Log) OPTLOG, SECLOG OPTLOG(Operatio n Log), SECLOG(Security Log) OPTLOG, SECLOG
None
OPTLOG
Security Management
Enumeration Type
None
None
DHCP
Interval Type
0~335
0~335
None
None
None
Interval Type
32~65535
32~65535
None
None
None
Interval Type
0~4095
0~4095
None
None
1024~65535
1024~65535
None
2905
Enumeration Type
1, 4, 5, 8, 10, 16, 20
None
D5
Enumeration Type
D1, D2, D4, D8, D16, D32, D64, 1, 2, 4, 8, 16, 32, 64, D128, D256, D512, 128, 256, 512, INFINITY INFINITY
None
None
Enhanced CELL-FACH
Interval Type
4~1504
4~1504
byte
42
Downlink Enhanced L2
Interval Type
4~1504
4~1504
byte
None
None
Interval Type
0~499
0~499
None
None
Enumeration Type
SAAL, SCTP
None
SAAL
None
String Type
None
1~20 characters
None
None
HSUPA 2ms TTI Streaming Traffic Class on HSDPA Streaming Traffic Class on HSUPA Enhanced CELL-FACH Bit Field Type
MAP_HSUPA_TTI_ 2MS_SWITCH, MAP_INTER_RAT_ PS_IN_CHANLE_LI MIT_SWITCH, MAP_PS_BE_ON_ E_FACH_SWITCH, MAP_PS_STREAM _ON_E_FACH_SW ITCH, MAP_PS_STREAM _ON_HSDPA_SWI TCH, MAP_PS_STREAM _ON_HSUPA_SWI TCH, MAP_SRB_6800_ WHEN_RAB_ON_ HSDSCH_SWITCH
MAP_HSUPA_TTI_2 MS_SWITCH, MAP_INTER_RAT_P S_IN_CHANLE_LIMIT _SWITCH, MAP_PS_BE_ON_E_ FACH_SWITCH, MAP_PS_STREAM_ ON_E_FACH_SWITC H, MAP_PS_STREAM_ ON_HSDPA_SWITC H, MAP_PS_STREAM_ ON_HSUPA_SWITC H, MAP_SRB_6800_WH EN_RAB_ON_HSDS CH_SWITCH None
None
Ethernet OAM
IP Address Type
None
None
None
None
None
None
None
None
None
IP Address Type
None
None
None
IP Address Type
None
None
Interval Type
-50~33
-50~33
dBm
None
Intra RNC Cell Update Inter RNC Cell Update Open Loop Power Control
Interval Type
-50~33 TRUE(Configure the maximum uplink power of UE), FALSE(Not configure the maximum uplink power of UE)
-50~33
dBm
24
Enumeration Type
TRUE, FALSE
None
FALSE
1~100000
1~100000
None
3~328080
3~328080
None
0~254
0~254
None
None
0~3
0~3
None
Interval Type
0~3
0~3
None
0~256000000
0~256000000
bit/s
None
Interval Type
0~16000000
0~16000000
bit/s
None
Interval Type
1~1562
64~100000, step:64
kbit/s
None
Interval Type
0~255
0~255
None
150
Interval Type
0~255
0~255
None
100
Interval Type
4~8
4~8
None
Interval Type
1~6
1~6
None
D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, 0, 1, 2, 3, 4, 5, 6, 7, 8, D10, D11, D12, 9, 10, 11, 12, 13, 14, D13, D14, D15 15 None
D15
Enhanced CELL-FACH
Interval Type
0~49
49
1~4
1~4
None
Interval Type
0~15
0~15
None
None
Admission Control
Interval Type
0~48
0~48
None
48
Interval Type
-350~150
dB
10
24~1031
24~1031
byte
1031
Interval Type
4~16
4~16
None
16
Admission Control
Interval Type
0~100
0~100
None
64
Admission Control
Interval Type
0~100
0~100
None
20
Load Measurement
Interval Type
2~255
2~255
None
FP MUX for IP Transmission UDP MUX for IuCS Transmission Interval Type
1~1500
1~1500
byte
256
IP Transmission Introduction on Iub Interface IP Transmission Introduction on Iu Interface IP Transmission Introduction on Iur Interface Interval Type
1~1500
1~1500
None
None
Security Management
Interval Type
1~255
1~255
None
None
1~6
1~6
None
Interval Type
0~10
0~10
None
Faulty Management
Interval Type
10000~150000
10000~150000
None
None
0~254
0~254
None
None
Interval Type
-100~500
dBm
346
Interval Type
25~50,250~500
25~50(UNI), 250~500(NNI)
None
None
Interval Type
1~255
1~255
None
Interval Type
1~60
1~60, step:1
None
None
Interval Type
1~746
1~746
byte
64
None
Interval Type
1~746
1~746
None
None
Interval Type
0~100
0~1, step:0.01
per cent
75
BSC/RNC Clock
Interval Type
1~24
1~24
12
None
Interval Type
2~255
2~255
None
16
Interval Type
0~500
dBm
430
Interval Type
-50~33
-50~33
dBm
24
Interval Type
-50~33
-50~33
dBm
24
Interval Type
-50~33
-50~33
dBm
24
Interval Type
-50~33
-50~33
dBm
24
Interval Type
1~3
1~3
None
Interval Type
1~999
1~999
None
None
FALSE
0~15
0~15
None
None
Interval Type
0~511
0~511
None
None
None
IP Address Type
None
None
Admission Control
Interval Type
0~100
None
100
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~100
0~100
per cent
100
Enumeration Type
COMMON, MCCH
COMMON, MCCH
None
COMMON
Load Reshuffling
Interval Type
1~15
1~15
None
Interval Type
1~10
1~10
min
FACH Transmission Sharing for MBMS MBMS Introduction Package MBMS Introduction Package
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
None
String Type
None
000~999
None
None
String Type
None
000~999
None
None
FALSE, TRUE
FALSE, TRUE
None
TRUE
Overload Control
Interval Type
0~8
0~8
None
Enumeration Type
OFF, ON
OFF, ON
None
OFF
Enumeration Type
D8, D16, D32, D64, 8, 16, 32, 64, 128, D128, D144, D256 144, 256
kbit/s
D16
Interval Type
0~65535
0~65535
None
None
Interval Type
0~16777215
0~16777215
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
None
License Management
Interval Type
0~8040000
0~8040000
kbit/s
None
None
PTM
Interval Type
3~10000
3~10000
byte
None
MBSC Load Balancing MBSC Handover based on Load Enhancement Load Based GSM and UMTS Handover Enhancement Based on Iur-g Interval Type
0~10
0~10
None
10
-100~100
-100~100
None
10
-100~100
-100~100
None
30
OFF(OFF), ON(ON)
OFF, ON
None
OFF
Load Based GSM and UMTS Handover Enhancement Based on Iur-g NACC Procedure Optimization
Enumeration Type
OFF, ON
OFF, ON
None
OFF
None
OFF
MOCN Introduction Package Inter-RAT Handover Based on Coverage Inter-RAT Handover Based on DL QoS Intra RNC Cell Update Inter RNC Cell
String Type
None
000~999
None
None
String Type
None
3 digits
None
None
3GPP Specifications
String Type
None
000~999
None
None
Interval Type
0~3
0~3
None
Interval Type
7~10
7~10
None
Interval Type
0~3
0~3
None
None
Interval Type
4,8
4, 8
None
None
IP Transmission Introduction on Iub Interface IP Transmission Introduction on Iu Interface IP Transmission Introduction on Iur Interface Interval Type UBR+ ATM QoS Class CBR, rt-VBR, nrt-VBR, UBR ATM QoS Classes ATM Transmission Introduction Package
30~70754
30~70754
None
None
Interval Type
0~7
0~7
None
None
Ethernet OAM
String Type
None
1~20 characters
None
None
Enumeration Type
AUTO
Ethernet OAM
Interval Type
1~1000
1~1000
None
None
Ethernet OAM
None
None
LONG, SHORT
None
LONG
Interval Type
0~255
0~255
None
None
Interval Type
-10~5
-10~5
dB
-7
Enumeration Type
FALSE, TRUE
None
FALSE
None
Interval Type
1~1562
64~100000, step:64
kbit/s
None
D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, 0, 1, 2, 3, 4, 5, 6, 7, 8, D10, D11, D12, 9, 10, 11, 12, 13, 14, D13, D14, D15 15 None
D14
None
SF8
Enhanced CELL-FACH
Interval Type
0~49
21
AMR/WB-AMR Speech Rates Control Inter-RAT Handover Based on DL QoS Interval Type
1~60
1~60
min
None
Dynamic Channel Configuration Control (DCCC) Inter-RAT Handover Based on DL QoS Interval Type
1~60
1~60
min
None
Dynamic Channel Configuration Control (DCCC) Inter-RAT Handover Based on DL QoS Interval Type
1~60
1~60
min
None
Load Measurement
Interval Type
1~60
1~60
min
None
Load Measurement
Interval Type
1~60
1~60
min
None
Load Measurement
Interval Type
1~60
1~60
min
None
Load Measurement
Interval Type
1~60
1~60
min
None
Load Measurement
Interval Type
1~60
1~60
min
None
Load Measurement
Interval Type
1~60
1~60
min
None
Load Measurement
Interval Type
1~60
1~60
min
None
1~60
1~60
min
None
1~32
1~32
None
Open Loop Power Control Intra Frequency Load Balance Interval Type IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface Interval Type
-100~500
dBm
313
10~1000
10~1000
ms
100
Interval Type
10~1000
10~1000
ms
100
3.4/6.8/13.6/27. 2 kbit/s RRC Connection and RAB Enumeration Assignment Type IP Re-route Based on BFD/ARP
None
SF4
Interval Type
0~11
0~11
None
None
None
Interval Type
0~11
None
None
None
Enumeration Type
UP, DOWN
None
None
Interval Type
1~32
1~32
None
MOCN Introduction Package Inter-RAT Handover Based on Coverage Inter-RAT Handover Based on DL QoS Intra RNC Cell Update Inter RNC Cell
String Type
None
00~99, 000~999
None
None
String Type
None
2~3 digits
None
None
3GPP Specifications
String Type
None
00~99, 000~999
None
None
COMM_MOCN_NR I_GLOBAL_CONFI G_MODE_SWITCH , COMM_MIB_MULT I_PLMN_LIST_ALL OWED_SWITCH, SPARE_1_SWITC H, SPARE_2_SWITC H, SPARE_3_SWITC H, SPARE_4_SWITC H, SPARE_5_SWITC H, SPARE_6_SWITC H
COMM_MOCN_NRI_ GLOBAL_CONFIG_M ODE_SWITCH, COMM_MIB_MULTI_ PLMN_LIST_ALLOW ED_SWITCH, SPARE_1_SWITCH, SPARE_2_SWITCH, SPARE_3_SWITCH, SPARE_4_SWITCH, SPARE_5_SWITCH, SPARE_6_SWITCH None
None
Enumeration Type
NO, YES
NO, YES
None
NO
BSC/RNC Clock
Enumeration Type
None
AUTO
IP Transmission Introduction on Enumeration Iub Interface Type Configuration Management Enumeration Type
None
None
OFF, ON
None
None
Configuration Management
Enumeration Type
GO(GSM), UO(UMTS), GU(GSM and UMTS) MODE1(1:1 Protection Switching), MODE2(1+1 Unidirectional Protection Switching), MODE3(1+1 Bidirectional Protection Switching), MODE4(Y Line)
GO, UO, GU
None
None
None
Enumeration Type
None
None
None
Enumeration Type
None
Interval Type
5000~30000
5000~30000
ms
10000
Interval Type
5000~30000
5000~30000
ms
10000
Flow Control
Interval Type
40~60000
40~60000
ms
1000
Dynamic Channel Configuration Control (DCCC) Interval Type IP Transmission Introduction on Iub Interface IP Transmission Introduction on Iu Interface IP Transmission Introduction on Iur Interface IP Re-route Based on BFD/ARP Interval Type
1~65535
1~65535
60
0~167
None
None
None
Interval Type
0~167
0~167
None
None
Enumeration Type
MPS_EMERGENC Y(MPS_EMERGEN CY), MPS_NORMAL(MP S_NORMAL), MPS_NORMAL, MPS_NEUTRAL(M MPS_EMERGENCY, PS_NEUTRAL) MPS_NEUTRAL None
MPS_NEUTRAL
IP Transmission Introduction on Iub Interface IP Transmission Introduction on Iu Interface IP Transmission Introduction on Enumeration Iur Interface Type
MLPPP, MCPPP
MLPPP, MCPPP
None
MCPPP
Configuration Management
Interval Type
0~27
0~27
None
None
Configuration Management
Interval Type
0~11
0~11
None
None
OFF(OFF), ON(ON)
OFF, ON
None
OFF
OFF(OFF), ON(ON)
OFF, ON
None
OFF
Any Type
None
1~100 characters
None
None
Enumeration Type
OFF, ON
None
OFF
None
Enumeration Type
CLEAR(Cleared), LOP(Lockout of Protection), FS(Forcibly switchover working link to protection link), MS(Manual switchover from working link to protection link), EXERS(Exercisely switch working link CLEAR, LOP, FS, to protection link) MS, EXERS,
None
None
None
Enumeration Type
ON(ON), OFF(OFF)
ON, OFF
None
None
Admission Control
Interval Type
0~100
0~1, step:0.01
per cent
60
Admission Control
Interval Type
0~63
0~63
None
40
Interval Type
0~100
per cent
80
Interval Type
0~100
per cent
50
kbit/s
D16
True, False
TRUE, FALSE
None
FALSE
Admission Control
Interval Type
0~100
0~1, step:0.01
per cent
20
Admission Control
Interval Type
0~63
0~63
None
16
Configuration Management
Enumeration Type
MET(Metric), IMP(Imperial)
MET, IMP
None
MET
Cell ID + RTT Function Based Enumeration LCS Type IP Transmission Introduction on Iub Interface Interval Type
0, 1
None
None
500~1500
500~1500
None
800
None
Interval Type
776~1696
776~1696
byte
1696
IP Transmission Introduction on Iub Interface IP Transmission Introduction on Iu Interface IP Transmission Introduction on Iur Interface Interval Type IP Transmission Introduction on Iub Interface IP Transmission Introduction on Iu Interface IP Transmission Introduction on Iur Interface Interval Type
256~1650
256~1650
byte
None
1~1500
1~1500
ls
1000
None
Interval Type
1~1500
1~1500
ls
None
FP MUX for IP Transmission UDP MUX for IuCS Enumeration Transmission Type
None
None
FP MUX for IP Transmission UDP MUX for IuCS Transmission Interval Type
1~512
1~16(FG2a/GOUa), 1~512(FG2c/GOUc)
None
None
Interval Type
10~2000
10~2000
None
100
3GPP Specifications
Interval Type
0~7
0~7
None
3GPP Specifications
Interval Type
0~7
0~7
None
3GPP Specifications
Interval Type
0~7
0~7
None
3GPP Specifications
Interval Type
1~8
1~8
None
3GPP Specifications
Enumeration Type
D1, D2, D4, D10, D20, D50, D100, D200, D400, D600, D800, D1000
D1, D2, D4, D10, D20, D50, D100, D200, D400, D600, D800, D1000
None
D1
3GPP Specifications
Enumeration Type
None
D50
3GPP Specifications
Enumeration Type
D1, D2, D4, D10, D20, D50, D100, D200, D400, D600, D800, D1000
D1, D2, D4, D10, D20, D50, D100, D200, D400, D600, D800, D1000
None
D1
3GPP Specifications ATM Transmission Introduction Package ATM Transmission Introduction Package
Enumeration Type
None
D1
String Type
None
1~49 characters
None
None
String Type
None
1~49 characters
None
None
ATM Transmission Introduction Package ATM Transmission Introduction Package ATM Transmission Introduction Package
String Type
None
1~31 characters
None
None
String Type
None
1~31 characters
None
None
String Type
None
1~31 characters
None
None
None
String Type
None
1~31 characters
None
None
IP Transmission Introduction on Iu Interface String Type IP Transmission Introduction on Iu Interface String Type
None
1~49 characters
None
None
None
1~49 characters
None
None
None
1~31 characters
None
None
None
1~49 characters
None
None
None
1~31 characters
None
None
Interval Type
0~50
0~50
frame
Interval Type
0~50
0~50
frame
Flow Control
Interval Type
1~200
1~200
None
20
1024~65535
1024~65535
None
58080
FP MUX for IP Transmission UDP MUX for IuCS IP Address Transmission Type
None
None
IP Address Type
None
None
Flow Control
Interval Type
1~200
1~200
None
20
DHCP
IP Address Type
None
None
DHCP
IP Address Type
None
None
DHCP
String Type
None
1~30 characters
None
None
DHCP
String Type
None
1~30 characters
None
None
CRD_ADCTRL, HSDPA_UU_ADCT RL, HSUPA_UU_ADCT RL, MBMS_UU_ADCT RL, HSDPA_GBP_MEA S, HSDPA_PBR_MEA S, DOFFC, HSUPA_PBR_MEA S, HSUPA_EDCH_RS EPS_MEAS, EMC_UU_ADCTRL , FACH_UU_ADCTR L
CRD_ADCTRL, HSDPA_UU_ADCTR L, HSUPA_UU_ADCTR L, MBMS_UU_ADCTRL, HSDPA_GBP_MEAS, HSDPA_PBR_MEAS, DOFFC, HSUPA_PBR_MEAS, HSUPA_EDCH_RSE PS_MEAS, EMC_UU_ADCTRL, FACH_UU_ADCTRL None
None
Admission Control
Enumeration Type
None
Load Reshuffling Overload Control Potential User Control Intra Frequency Load Balance Load Measurement Bit Field Type
INTRA_FREQUEN CY_LDB, PUC, UL_UU_LDR, DL_UU_LDR, UL_UU_OLC, DL_UU_OLC, OLC_EVENTMEAS , CELL_CODE_LDR, CELL_CREDIT_LD R
INTRA_FREQUENCY _LDB, PUC, UL_UU_LDR, DL_UU_LDR, UL_UU_OLC, DL_UU_OLC, OLC_EVENTMEAS, CELL_CODE_LDR, CELL_CREDIT_LDR None
None
Load Reshuffling
Enumeration Type
NBM_LDC_ALL_U E(Select all users), NBM_LDC_MATCH _UE_ONLY(Select users match target cell support only), NBM_LDC_MATCH _UE_FIRST(Select users match target cell support first)
NBM_LDC_MAT CH_UE_ONLY
ALGORITHM_D EPEND_ON_LC G
Admission Control
Enumeration Type
ALGORITHM_OFF, ALGORITHM_FIRS T, ALGORITHM_SEC OND, ALGORITHM_THIR D PRIORITY1, PRIORITY2, PRIORITY3, PRIORITY4, PRIORITY5, PRIORITY6, PRIORITY7, PRIORITY8, PRIORITY9, PRIORITY10, PRIORITY11, PRIORITY12, PRIORITY13, PRIORITY14
ALGORITHM_OFF, ALGORITHM_FIRST, ALGORITHM_SECO ND, ALGORITHM_THIRD None PRIORITY1, PRIORITY2, PRIORITY3, PRIORITY4, PRIORITY5, PRIORITY6, PRIORITY7, PRIORITY8, PRIORITY9, PRIORITY10, PRIORITY11, PRIORITY12, PRIORITY13, PRIORITY14,
None
None
None
Enumeration Emergency Call Type Load Based GSM and UMTS Handover Enhancement Based on Iur-g Interval Type Inter-RAT Handover Based on Coverage
ALGORITHM_OFF( WPS Algorithm Switch OFF), ALGORITHM_ON( WPS Algorithm ALGORITHM_OFF, Switch ON) ALGORITHM_ON
None
ALGORITHM_O FF
1~32
1~32
None
None
Interval Type
0~32
0~32
None
None
Flow Control
Interval Type
1~200
1~200
None
60
DHCP
Enumeration Type
None
Inter-RAT Handover Based on Coverage Intra Node B Softer Handover Inter RNC Soft Handover
Interval Type
0~7
0~7
None
None
Interval Type
0~65535
0~65535
None
None
Multi-Carrier Switch off Based on Traffic Load Intra Node B Softer Handover Inter RNC Soft Handover Inter-RAT Handover Based on Coverage
Interval Type
0~100
0~1, step:0.01
per cent
20
None
None
None
NC0
Interval Type
2~10
2~10
None
Inter-RAT Handover Based on Service Inter-RAT Handover Enumeration Based on Load Type
OFF, ON
OFF, ON
None
ON
Interval Type
1~16
1~16
None
None
YES
None
None
None
DHCP
IP Address Type
None
None
DHCP
IP Address Type
None
None
Interval Type
1~16
None
15
Enumeration Type
None
None
Interval Type
1~256
1~256
None
3GPP Specifications
Enumeration Type
MODE1, MODE2
MODE1, MODE2
None
MODE2
Iu Flex Faulty Management Faulty Management Faulty Management Faulty Management Faulty Management
Interval Type
0~60
0~60
Interval Type
40~45
40~45
43
Interval Type
55~59
55~59
57
Interval Type
40~45
40~45
43
Interval Type
55~59
55~59
57
Interval Type
40~45
40~45
43
Faulty Management Faulty Management Faulty Management Faulty Management Faulty Management Faulty Management Faulty Management
Interval Type
55~59
55~59
57
Interval Type
40~45
40~45
43
Interval Type
55~59
55~59
57
Interval Type
40~45
40~45
43
Interval Type
55~59
55~59
57
Interval Type
40~45
40~45
43
Interval Type
55~59
55~59
57
IP Transmission Introduction on Iub Interface IP Transmission Introduction on Iu Interface IP Transmission Introduction on Iur Interface Interval Type
0 None
None
Interval Type
0~3840
0~3840
None
3840
Interval Type
0~3840
0~3840
None
3840
Interval Type
0~65535
0~65535
None
None
None
Interval Type
0~65535
0~65535
None
None
None
Interval Type
0~65535
0~65535
None
None
3GPP Specifications
Interval Type
0~65535
0~65535
None
None
DHCP
Interval Type
0~3
0~3
None
None
None
None
String Type
None
1~64 characters
None
None
DHCP
String Type
None
1~64 characters
None
None
3GPP Specifications
Enumeration Type
None
R7
DHCP
Enumeration Type
ETH/TRUNK, PPP/MP
ETH/TRUNK, PPP/MP
None
None
None
Interval Type
1~60
1~60
None
30
DHCP
Enumeration Type
PERIOD, EVENT
PERIOD, EVENT
None
PERIOD
None
Interval Type
0~1,12~15,22~23
None
None
None
Interval Type
0~2
0~2
None
None
None
Enumeration Type
BASE_BOARD, CH_STM1, E1
BASE_BOARD, CH_STM1, E1
None
None
None
Normal
3GPP Specifications
Interval Type
1~288
5~1440, step:5
min
None
3GPP Specifications
Compound Type
hour, min, sec IUB(Iub Interface), IUR(Iur Interface), IUCS(Iu-CS Interface), IUPS(IuPS Interface), UNI_AAL2SWITCH (the adjacent node of the ATM switch on the Iub interface), NNI_AAL2SWITCH (the adjacent node of ATM switch on Iur or Iu-CS interface)
00:00:00~23:59:59
None
Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Hybrid Iub IP Transmission ATM/IP Dual Stack Node B
Enumeration Type
None
None
PICO_TYPE1, PICO_TYPE2
PICO_TYPE1, PICO_TYPE2
None
None
Enumeration Type
NOT_CONFIGU RED
Interval Type
0~100
0~1, step:0.01
per cent
Interval Type
1~256
1~256
None
50
Interval Type
0~30
0~30
None
None
0~63
0~63
None
None
Interval Type
0~31
0~31
None
None
Intra Node B Softer Handover Inter RNC Soft Handover Inter Frequency Hard Handover Based on Enumeration Coverage Type
FALSE, TRUE
FALSE, TRUE
None
FALSE
Interval Type
1~5
1~5
None
None
Interval Type
1~10
1~10
None
Interval Type
0~1023
0~1023
None
None
3GPP Specifications Interface Message Tracing Inter RNC Cell Update Inter RNC URA Update Direct Signaling Connection Reestablishment (DSCR) RNC Node Redundancy Interval Type
0~4095
0~4095
None
None
3GPP Specifications Interface Message Tracing Inter RNC Cell Update Inter RNC URA Update Direct Signaling Connection Reestablishment (DSCR) RNC Node Redundancy Interval Type
0~4095
0~4095
None
None
None
Interval Type
0~4095
0~4095
None
None
Any Type
None
None
None
None
3GPP Specifications
Any Type
None
ATM address
None
None
3GPP Specifications
Any Type
None
42 characters
None
None
Interval Type
1~16
1~16
None
Interval Type
0~1023
0~1023
None
None
1~16
1~16
None
None
Domain Specific Access Control (DSAC) Interval Type IP Transmission Introduction on Iub Interface IP Transmission Introduction on Iu Interface IP Transmission Introduction on Iur Interface Interval Type
1~16
1~16
None
0~100
0~100
per cent
None
0~100
0~100
per cent
0~100
0~100
per cent
0~100
0~100
per cent
Link aggregation
Interval Type
0~100
0~100
per cent
None
Interval Type
0~63
0~63
None
None
Link aggregation
Enumeration Type
OFF(OFF), ON(ON) ALL(Shield by Alarm ID), BOARD(Shield by Board), PORT(Shield by Port), DSP(Shield by DSP)
OFF, ON
None
None
Faulty Management
Enumeration Type
None
Interval Type
-20~20
-20~20
dB
Interval Type
-20~20
-20~20
dB
-4
Interval Type
-20~20
-20~20
dB
Interval Type
-20~20
-20~20
dB
-4
Interval Type
-10~10
-20~20, step:2
dB
Interval Type
-10~10
-20~20, step:2
dB
-2
Overload Control
Interval Type
100~86400000
100~86400000
ms
3000
None
IP Address Type
None
None
None
IP Address Type
None
None
Security Management
String Type
None
1~32 characters
None
None
MOCN Introduction Package IP-Based 2G/3G CoTransmission on MBSC Side Dedicated Carrier for Each Enumeration Operator Type
None
Enumeration Type
None
None
None
Enumeration Type
TRCH_DCH, TRCH_HSDSCH
TRCH_DCH, TRCH_HSDSCH
None
None
Cell ID + RTT Function Based LCS OTDOA Based LCS A-GPS Based LCS Bit Field Type
None
None
Enumeration Type
SDH, SONET
SDH, SONET
None
None
0~179
0~179
degree
None
Enumeration Type
None
Step_by_Step
None
ACTIVE
UE_ASSISTED
Enumeration Type
None
NOT_FORBIDD EN
Enumeration Type
PEER(PEER), LOCAL(LOCAL)
PEER, LOCAL
None
LOCAL
Enumeration Type
NO(ATM_ADDRES S_DOES_NOT_BE LONG_TO_THIS_A DJACENT_NODE), YES(ATM_ADDRE SS_BELONGS_TO _THIS_ADJACENT _NODE) NO, YES
None
YES
Flow Control
Interval Type
30~100
30~100
per cent
70
Flow Control
30~100
30~100
per cent
60
Flow Control
ON, OFF
ON, OFF
None
ON
None
DISABLED
Interval Type
1~4294967295
1~4294967295
None
None
0~65535
0~65535
None
None
None
Interval Type
1~4294967295
1~4294967295
None
None
None None
0~65535 1~4294967295
0~65535 1~4294967295
None None
None None
IP Transmission Introduction on Iub Interface Hybrid Iub IP Transmission ATM/IP Dual Enumeration Stack Node B Type
QoS(QoS), BE(BE), AF11(AF11), AF12(AF12), AF13(AF13), AF21(AF21), AF22(AF22), AF23(AF23), AF31(AF31), AF32(AF32), AF33(AF33), AF41(AF41), AF42(AF42), AF43(AF43), EF(EF), LQ_QOS(LQ_QOS ), LQ_BE(LQ_BE), LQ_AF11(LQ_AF11 ), LQ_AF12(LQ_AF12 ), LQ_AF13(LQ_AF13 ), LQ_AF21(LQ_AF21 ), LQ_AF22(LQ_AF22 ), LQ_AF23(LQ_AF23 ), LQ_AF31(LQ_AF31 ), LQ_AF32(LQ_AF32 ), LQ_AF33(LQ_AF33 ), LQ_AF41(LQ_AF41
QoS, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQ_QOS, LQ_BE, LQ_AF11, LQ_AF12, LQ_AF13, LQ_AF21, LQ_AF22, LQ_AF23, LQ_AF31, LQ_AF32, LQ_AF33, LQ_AF41, LQ_AF42, LQ_AF43, LQ_EF None
None
Enumeration Type
MAINCPU_PATCH( Main programme patch), DSP_PATCH(DSP programme patch), MAINCPU_PATCH, UCODE_PATCH(M DSP_PATCH, arcrocode patch) UCODE_PATCH
None
None
Interval Type
-350~150
dB
-20
Interval Type
-100~500
dBm
330
0~100
0~10, step:0.1
dB
None
Interval Type
30~353207
30~353207
None
None
Outer Loop Power Control Inner Loop Power Control Downlink Power Balance HSUPA Power Control Bit Field Type IP Transmission Introduction on Iu Interface Interval Type
PC_AMR_MODE_I NDUCE_BLER_AL TER_SWITCH, PC_DL_INNER_LO OP_PC_ACTIVE_S WITCH, PC_DOWNLINK_P OWER_BALANCE _SWITCH, PC_EFACH_ECN0 _DYN_ADJ_SWIT CH, PC_FP_MULTI_RL S_IND_SWITCH, PC_HSUPA_HARQ NUM_AUTO_ADJU ST_SWITCH, PC_HSUPA_PO_U PDATE_SWITCH, PC_INNER_LOOP _LMTED_PWR_IN C_SWITCH, PC_OLPC_SWITC H, PC_RL_RECFG_SI R_TARGET_CARR Y_SWITCH, PC_SIG_DCH_OL PC_SWITCH, PC_UL_SIRERR_H IGH_REL_UE_SWI TCH
PC_AMR_MODE_IN DUCE_BLER_ALTER _SWITCH, PC_DL_INNER_LOO P_PC_ACTIVE_SWIT CH, PC_DOWNLINK_PO WER_BALANCE_SW ITCH, PC_EFACH_ECN0_D YN_ADJ_SWITCH, PC_FP_MULTI_RLS_ IND_SWITCH, PC_HSUPA_HARQN UM_AUTO_ADJUST_ SWITCH, PC_HSUPA_PO_UP DATE_SWITCH, PC_INNER_LOOP_L MTED_PWR_INC_S WITCH, PC_OLPC_SWITCH, PC_RL_RECFG_SIR _TARGET_CARRY_S WITCH, PC_SIG_DCH_OLPC _SWITCH, PC_UL_SIRERR_HIG H_REL_UE_SWITCH None
None
1~10
1~10
Interval Type
0~65535
0~65535
None
None
IP Transmission Introduction on Iub Interface IP Transmission Introduction on Iu Interface IP Transmission Introduction on IP Address Iur Interface Type
None
None
IP Transmission Introduction on Iub Interface IP Transmission Introduction on Iu Interface IP Transmission Introduction on IP Address Iur Interface Type IP Re-route Based on BFD/ARP
None
None
IP Address Type
None
None
None
IP Address Type
None
None
IP Transmission Introduction on Iub Interface ATM/IP Dual IP Address Stack Node B Type
None
None
IP Transmission Introduction on Iub Interface ATM/IP Dual IP Address Stack Node B Type
None
None
IP Transmission Introduction on Iub Interface Hybrid Iub IP Transmission ATM/IP Dual IP Address Stack Node B Type IP Address Type
None
None
None
None
None
BOOTP Permanent AAL5 Connections for Control Plane Traffic ATM Transmission Introduction Package ATM Switching Based Hub IP Address Node B Type IP Address Type
None
None
None
None
None
Enumeration Type
INVALID(Invalid), VALID(Valid)
Valid, Invalid
None
Invalid
IP Transmission Introduction on Iub Interface Hybrid Iub IP Transmission ATM/IP Dual IP Address Stack Node B Type
None
255.255.255.255
Interval Type
0~65535
0~65535
None
None
IP Transmission Introduction on Iub Interface ATM/IP Dual Stack Node B Interval Type
1024~65535
1024~65535
None
None
RNC Node Redundancy Load Based GSM and UMTS Handover Enhancement Based on Iur-g
Interval Type
0~4095
0~4095
None
None
Interval Type
0, 2, 4, 6, 8, 10, 12, 0,2,4,6,8,10,12,14,1 14, 16, 18, 20, 22, 24, 6,18,20,22,24,26 26 None
None
Load Based GSM and UMTS Handover Enhancement Based on Iur-g Load Based GSM and UMTS Handover Enhancement Based on Iur-g
Interval Type
0~11
0~11
None
None
Interval Type
0~7
0~3
None
None
Permanent AAL5 Connections for Control Plane Traffic ATM Transmission Introduction Enumeration Package Type
None
None
Inter-RAT Handover Based on Service Inter-RAT Handover Based on Load Interval Type
0~65535
0~65535
30
Interval Type
0~300
0~300
30
D4000
D4000
Flow Control
Interval Type
0~1000
0~1000
None
Flow Control
Interval Type
0~1000
0~1000
None
1~60
1~60
Inter Frequency Hard Handover Based on Coverage Inter Frequency Hard Handover Based on DL QoS Interval Type
1~64
500~32000, step:500 ms
Interval Type
1~64
500~32000, step:500 ms
Interval Type
1~64
500~32000, step:500 ms
Inter-RAT Handover Based on Service Inter-RAT Handover Based on Load Interval Type
1~64
500~32000, step:500 ms
Enumeration Type
None
D16
Enumeration Type
None
D16
Enumeration Type
None
D64
Load Measurement
Interval Type
2~65535
2~65535
None
150
Enumeration Type
None
IP Transmission Introduction on Iub Interface IP Transmission Introduction on Iu Interface IP Transmission Introduction on Enumeration Iur Interface Type IP Transmission Introduction on Iub Interface IP Transmission Introduction on Iu Interface IP Transmission Introduction on Enumeration Iur Interface Type
Disable(Disable), Enable(Enable)
Disable, Enable
None
Enable
Disable(Disable), Enable(Enable)
Disable, Enable
None
Enable
IP Transmission Introduction on Enumeration Iub Interface Type FP MUX for IP Transmission UDP MUX for IuCS Transmission Bit Field Type
BE(BE), AF11(AF11), AF12(AF12), AF13(AF13), AF21(AF21), AF22(AF22), AF23(AF23), AF31(AF31), AF32(AF32), AF33(AF33), AF41(AF41), AF42(AF42), AF43(AF43), EF(EF) BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF
BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, , AF43, EF
None
None
None
None
Interval Type
0~255
0~255
None
None
3GPP Specifications
Interval Type
0~255
0~255
None
3GPP Specifications
Interval Type
0~255
0~255
None
None
3GPP Specifications
Interval Type
0~255
0~255
None
3GPP Specifications
Interval Type
0~255
0~255
None
None
3GPP Specifications
Interval Type
0~255
0~255
None
3GPP Specifications
Interval Type
0~255
0~255
None
3GPP Specifications
Interval Type
0~255
0~255
None
3GPP Specifications
Interval Type
0~255
0~255
None
3GPP Specifications
Interval Type
1~255
1~255
None
None
3GPP Specifications
Interval Type
0~255
0~255
None
10
Enumeration Type
None
V36
Interval Type
-10~5
-10~5
dB
-7
None
Interval Type
0~27
0~27
None
None
Security Management
Enumeration Type
None
None
Ethernet OAM
Interval Type
5~64
5~64
None
10
Ethernet OAM
Interval Type
64~1024
64~1024
byte
128
None
Interval Type
10~1500
10~1500
bit
128
None None
20~1500 95~512
20~1500 95~512
byte byte
56 128
3GPP Specifications
Interval Type
1~256
1~256
None
None
3GPP Specifications
Interval Type
1~256
1~256
None
None
None
Interval Type
1~100
100~10000, step:100 ms
10
None
Interval Type
0~1000
0~1, step:0.001
None
30
Flow Control
Interval Type
30~100
30~100
per cent
60
Flow Control
Interval Type
30~100
30~100
per cent
60
Flow Control
Interval Type
30~100
30~100
per cent
50
Flow Control
Interval Type
30~100
30~100
per cent
50
Enumeration Type
ON, OFF
ON, OFF
None
ON
Interval Type
0~11
0~11
None
None
Interval Type
1~32
1~32
None
None
Faulty Management
Interval Type
0~335
0~335
None
None
None
Interval Type
0~7
0~7
None
None
0~335
0~31(AEUa/PEUa), 0~125(E1 of AOUa/POUa), 0~167(T1 of AOUa/POUa), 0~251(E1 of AOUc/POUc), 0~335(T1 of AOUc/POUc) 0~31(AEUa/PEUa), 0~125(E1 of AOUa/POUa), 0~167(T1 of AOUa/POUa), 0~251(E1 of AOUc/POUc), 0~335(T1 of AOUc/POUc) 0~31(AEUa/PEUa), 0~125(E1 of AOUa/POUa), 0~167(T1 of AOUa/POUa), 0~251(E1 of AOUc/POUc), 0~335(T1 of AOUc/POUc)
None
None
None
Interval Type
0~335
None
None
None
Interval Type
0~335
None
None
None
Interval Type
0~7
0~7
None
None
None
Interval Type
0~11
0~11
None
None
None
Interval Type
0~7
None
0~7
0~7
None
None
None
Interval Type
0~11
None
None
None
Interval Type
0~11
None
None
None
Interval Type
0~11
None
None
Interval Type
0~65535
0~65535
None
None
String Type
None
0~250 characters
None
None
Configuration Management
String Type
None
1~250 characters
None
None
Interval Type
1~80
10~800, step:10
ms
50
Interval Type
50~10000
500~10000(UNI), 90~500(NNI)
ms
None
None
Interval Type
21~65535
21~65535
None
None
None
Enumeration Type
IP, ATM
IP, ATM
None
None
Ethernet OAM Faulty Management Faulty Management Faulty Management Faulty Management
Enumeration Type Enumeration Type Enumeration Type Enumeration Type Enumeration Type
ETHER, TRUNK CLOSE(Close), OPEN(Open) CLOSE(Close), OPEN(Open) CLOSE(Close), OPEN(Open) CLOSE(Close), OPEN(Open)
ETHER, TRUNK CLOSE, OPEN CLOSE, OPEN CLOSE, OPEN CLOSE, OPEN
None None
CLOSE CLOSE
Interval Type
-5~10
-5~10
dB
None
Interval Type
1~8
1~8
dB
IP routing Based Hub Node B IP Transmission Introduction on Iub Interface IP Transmission Introduction on Iu Interface IP Transmission Introduction on Iur Interface Interval Type IP routing Based Hub Node B IP Transmission Introduction on Iub Interface IP Transmission Introduction on Iu Interface IP Transmission Introduction on Iur Interface Interval Type IP routing Based Hub Node B Interval Type
0~499
0~499
None
None
0~499
0~499
None
None
0~499
0~499
None
None
IP Transmission Introduction on Iub Interface IP Transmission Introduction on Iu Interface IP Transmission Introduction on Enumeration Iur Interface Type
Disable(Disable), Enable(Enable)
Disable, Enable
None
Disable
None
Interval Type
0~5
0~5
None
3GPP Specifications
Interval Type
0~255
0~255
None
NON_PERIODIC_R EPORT(Non periodical reporting), D250~1 D500~2 D1000~3 D2000~4 D3000~5 D4000~6 D6000~7 D8000~8 D12000~9 D16000~10 D20000~11 D24000~12 D28000~13 D32000~14 D64000
NON_PERIODIC_RE PORT, 250, 500, 1000, 2000, 3000, 4000, 6000, 8000, 12000, 16000, 20000, 24000, 28000, 32000, 64000 ms
D500
Interval Type
1~64
1~64
None
20
SIGNATURE0, SIGNATURE1, SIGNATURE2, SIGNATURE3, SIGNATURE4, SIGNATURE5, SIGNATURE6, SIGNATURE7, SIGNATURE8, SIGNATURE9, SIGNATURE10, SIGNATURE11, SIGNATURE12, SIGNATURE13, SIGNATURE14, SIGNATURE15
SIGNATURE0, SIGNATURE1, SIGNATURE2, SIGNATURE3, SIGNATURE4, SIGNATURE5, SIGNATURE6, SIGNATURE7, SIGNATURE8, SIGNATURE9, SIGNATURE10, SIGNATURE11, SIGNATURE12, SIGNATURE13, SIGNATURE14, SIGNATURE15. (Multiple options.)
None
None
Enumeration Type
OFF, ON
OFF, ON
None
OFF
Enumeration Type
OFF, ON
OFF, ON
None
ON
Flow Control
Interval Type
30~100
30~100
per cent
60
Flow Control
Interval Type
30~100
30~100
per cent
60
Flow Control
Interval Type
30~100
30~100
per cent
50
Flow Control
Interval Type
30~100
30~100
per cent
50
Flow Control
Enumeration Type
ON, OFF
ON, OFF
None
ON
Interval Type
0~99
0~99
None
Interval Type
0~99
0~99
None
None
Enumeration Type
HIGH, LOW
HIGH, LOW
None
None
Admission Control
Enumeration Type
None
HIGH
Enumeration Type
ARP, TrafficClass
ARP, TrafficClass
None
ARP
Interval Type
0~7
0~7
None
Interval Type
0~7
0~7
None
Interval Type
0~7
0~7
None
Interval Type
0~7
0~7
None
Interval Type
0~7
0~7
None
String Type
None
0~200 characters
None
None
2~30
2~30
min
None
3GPP Specifications Uplink Flow Control of User Plane Bit Field Type
INVOKE_TRACE_ SWITCH, SYS_INFO_UPDAT E_FOR_IU_RST, DRNC_DIRECT_D SCR, RNC_SHARE_SWI TCH, RNCAP_IMSI_HO_ SWITCH, TERMINAL_VERSI ON_DEBASE_SWI TCH, SYS_HO_OUT_CI PHER_SWITCH, SYS_HO_CIPHER _CONFIG, BARRED_CELL_F OR_CSDOMAIN_R ST, CR2284R1_SWITC H, CDT_MSG_FULL_ TRACE, CR2284R1_COMP ATIBLE_SWITCH, COMBINE_OPERA TION_DRD_SWIT CH, UL_INTER_PROTE CT_SWITCH, FAST_DORMANC Y_SWITCH, This parameter is set UPLINK_MDC_EN to 0 or 1 according to HENCEMENT_SWI the related domains. None
None
Enumeration Type
None
ITUT
0~60
0~60
20
0~60
0~60
20
0~60
0~60
20
0~60
0~60
20
0~60
0~60
20
ALL(Select all ports), SINGLE(Select one port) ALL, SINGLE ALL(Select all ports), SINGLE(Select one port) ALL, SINGLE
None
None
None
Enumeration Type
None
None
ALL(Select all E1/T1 ports), PORT(Select all E1/T1 ports of one channelized optical port), SINGLE(Select one E1/T1 port) ALL, PORT, SINGLE None
None
CORRM_SRNS R_PSBE_RELO C
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~100
0~100
per cent
100
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF None
None
Interval Type
0~100
0~100
None
30
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
None
Interval Type
0~100
0~100
None
100
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~100
0~100
per cent
100
Interval Type
-350~150
dB
-50
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~100
0~100
per cent
70
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF None
None
Interval Type
0~100
0~100
None
100
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
None
Interval Type
0~100
0~100
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~100
0~100
per cent
70
Interval Type
0~511
0~511
None
None
Interval Type
0~511
0~511
None
None
Interval Type
0~100
0~100
None
30
Interval Type
0~100
0~100
None
100
Inter-RAT Handover Based on Service Inter-RAT Handover Based on Load Load Based 3G2G Handover Enhancement Based on Iur-g Interval Type
0~100
0~100
per cent
60
0~14400
0~14400
20
0~14400
0~14400
20
0~64800
0~64800
20
0~14400
0~14400
20
0~64800
0~64800
120
0~14400
0~14400
20
Enumeration Type
OFF, ON
OFF, ON
None
OFF
Interval Type
60~900
60~900
900
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~100
0~100
per cent
100
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~100
0~100
per cent
100
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF None
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF None
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF None
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
None
Interval Type
0~100
0~100
None
30
Interval Type
0~100
0~100
None
100
Interval Type
0~100
0~100
None
30
Interval Type
0~100
0~100
None
100
Enumeration Type
SUPP_NONE
Interval Type
1~10
1~10
None
None
0~100
0~100
per cent
40
0~65534
0~65534
None
100
0~100
0~100
per cent
60
0~65534
0~65534
None
200
FALSE, TRUE
FALSE, TRUE
None
None
FALSE, TRUE
FALSE, TRUE
None
TRUE
Enumeration Type
OFF, ON
OFF, ON
None
OFF
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~100
0~100
per cent
100
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF None
None
Interval Type
0~100
0~100
None
100
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
None
Interval Type
0~100
0~100
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~100
0~100
per cent
100
Dynamic Channel Configuration Control (DCCC) RAB Quality of Service Renegotiation over Iu Interface Bit Field Type License Management
PS_BE_EXTRA_L OW_RATE_ACCE SS_SWITCH, PS_BE_INIT_RATE _DYNAMIC_CFG_ SWITCH, PS_BE_IU_QOS_N EG_SWITCH, PS_RAB_DOWNSI ZING_SWITCH, PS_RSC_FEEDBK _RABSETUP_CAC FAIL_SWITCH, PS_STREAM_IU_ QOS_NEG_SWITC H, PS_BE_STRICT_I U_QOS_NEG_SWI TCH
PS_BE_EXTRA_LO W_RATE_ACCESS_ SWITCH, PS_BE_INIT_RATE_ DYNAMIC_CFG_SWI TCH, PS_BE_IU_QOS_NE G_SWITCH, PS_RAB_DOWNSIZI NG_SWITCH, PS_RSC_FEEDBK_R ABSETUP_CACFAIL _SWITCH, PS_STREAM_IU_QO S_NEG_SWITCH, PS_BE_STRICT_IU_ QOS_NEG_SWITCH None
None
Interval Type
0~8040000
0~8040000
None
None
ON, OFF
None
None
BOOL, VALUE
None
None
None
Interval Type
123~65534
123~65534
None
None
None
None
DHCP
IP Address Type
None
None
DHCP
IP Address Type
None
None
Enumeration Type
ON, OFF
ON, OFF
None
ON
Enumeration Type
ON, OFF
ON, OFF
None
OFF
Enumeration Type
ON, OFF E1_DOUBLE_FRA ME(E1_DOUBLE_F RAME), E1_CRC4_MULTI_ FRAME(E1_CRC4_ MULTI_FRAME), T1_SUPER_FRAM E(T1_SUPER_FRA ME), T1_EXTENDED_S UPER_FRAME(T1_ EXTENDED_SUPE R_FRAME)
ON, OFF
None
ON
None
E1_DOUBLE_FRA ME(E1_DOUBLE_F RAME), E1_CRC4_MULTI_ FRAME(E1_CRC4_ MULTI_FRAME), T1_SUPER_FRAM E(T1_SUPER_FRA ME), T1_EXTENDED_S UPER_FRAME(T1_ EXTENDED_SUPE R_FRAME) E1_DOUBLE_FRA ME(E1_DOUBLE_F RAME), E1_CRC4_MULTI_ FRAME(E1_CRC4_ MULTI_FRAME), T1_SUPER_FRAM E(T1_SUPER_FRA ME), T1_EXTENDED_S UPER_FRAME(T1_ EXTENDED_SUPE R_FRAME)
None
None
FE, GE
FE, GE
None
None
String Type
None
0~200 characters
None
None
Load Measurement
Interval Type
1~32
1~32
None
Interval Type
6~86400
6~86400
1800
Interval Type
0~60
0~60
10
0~64 characters
None
None
Security Management
1~32 characters
None
None
Security Management
Interval Type
Faulty Management
6~32 BIT0, BIT1, BIT6, BIT7, BIT8, BIT9, BIT14, BIT15, BIT16, BIT17, BIT22, BIT23, BIT24, BIT25, BIT29, BIT30, BIT31 BIT0, BIT1, BIT2, BIT3, BIT4, BIT5, BIT6, BIT7, BIT8, BIT9, BIT10, BIT11, BIT12
6~32 characters
None
None
BIT0, BIT1, BIT6, BIT7, BIT8, BIT9, BIT14, BIT15, BIT16, BIT17, BIT22, BIT23, BIT24, BIT25, BIT29, BIT30, BIT31 None BIT0, BIT1, BIT2, BIT3, BIT4, BIT5, BI16, BIT7, BIT8, BIT9, BIT10, BIT11, BIT12
None
Faulty Management
None
None
Enumeration Type
ALGORITHM1, ALGORITHM2
ALGORITHM1, ALGORITHM2
None
ALGORITHM1
Interval Type
0~63
0~63
None
None
Interval Type
0~63
0~63
None
None
Interval Type
0~63
0~63
None
None
Interval Type
0~63
0~63
None
None
Interval Type
0~63
0~63
None
None
Enumeration Type
None
CS2
When CPICH Ec/No (FDD) is employeed, unit for Qhcs is dB, physical value for each parameter value is: 0: -24 1: -23.5 2: -23 3: -22.5 ... 45: -1.5 46: -1 47: -0.5 48: 0 49: (spare) ... 98: (spare) 99: (spare) When CPICH RSCP (FDD) is employeed, unit for Qhcs is dBm, physical value for each parameter value is: 0: -115 1: -114 2: -113 : 88: -27 89: -26 90: -(spare) 91: -(spare) : dB/ dBm
Intra RNC Cell Update Inter RNC Cell Update HCS (Hierarchical Cell Structure)
Interval Type
0~99
20
HCS (Hierarchical Cell Structure) Multi Frequency Band Networking Management Interval Type
0~99
0~99
dB/ dBm
20
Intra RNC Cell Update Inter RNC Cell Update Multi Frequency Band Networking Management Interval Type
0~40,255
{0~40}, {255}
dB
255
Intra RNC Cell Update Inter RNC Cell Update Intra RNC URA Update Inter RNC URA Update Multi Frequency Band Networking Management Interval Type
0~40,255
{0~40}, {255}
dB
255
Intra RNC Cell Update Inter RNC Cell Update Multi Frequency Band Networking Management Interval Type
0~40,255
{0~40}, {255}
dB
255
Intra RNC Cell Update Inter RNC Cell Update Intra RNC URA Update Inter RNC URA Update Multi Frequency Band Networking Management Interval Type
0~40,255
{0~40}, {255}
dB
255
Interval Type
-50~50
-50~50
dB
Interval Type
-24~0
-24~0
dB
None
Interval Type
-24~0
-24~0
dB
-18
Enumeration Type
TRUE(Configure the minimum quality threshold), FALSE(Not configure the minimum quality threshold) TRUE, FALSE
None
FALSE
Interval Type
-58~-13
-58~-13
dBm
None
Interval Type
-58~-13
-50
Interval Type
-58~-13
-115~-25, step:2
dBm
-58
Enumeration Type
TRUE, FALSE
TRUE, FALSE
None
FALSE
Enumeration Type
TRUE, FALSE
TRUE, FALSE
None
FALSE
Enumeration Type
TRUE(Configure the minimum signal level for access), FALSE(Not configure the minimum signal level for access) TRUE, FALSE
None
FALSE
Enumeration Type
None
CPICH_ECNO
Enumeration Type
OFF, ON
OFF, ON
None
OFF
Interval Type
5~20
5~20
None
Conversational QoS Class Streaming QoS Class Interactive QoS Class Background QoS Class Interval Type
0~99
0~99
None
None
Conversational QoS Class Streaming QoS Class Interactive QoS Class Background QoS Class Interval Type Conversational QoS Class Streaming QoS Class Interactive QoS Class Background QoS Class Interval Type
None
0~99
0~99
None
None
1~65535
1~65535
3GPP Specifications
Interval Type
0~255
0~255
None
None
3GPP Specifications
SUBCHANEL0, SUBCHANEL1, SUBCHANEL2, SUBCHANEL3, SUBCHANEL4, SUBCHANEL5, SUBCHANEL6, SUBCHANEL7, SUBCHANEL8, SUBCHANEL9, SUBCHANEL10, SUBCHANEL11
SUBCHANEL0, SUBCHANEL1, SUBCHANEL2, SUBCHANEL3, SUBCHANEL4, SUBCHANEL5, SUBCHANEL6, SUBCHANEL7, SUBCHANEL8, SUBCHANEL9, SUBCHANEL10, SUBCHANEL11. (Multiple options.)
None
None
3GPP Specifications
Interval Type
10000~240000
10000~240000
ms
30000
MOCN Introduction Package MOCN Mobility Management MOCN Load Enumeration Banlance Type
NO, YES
NO, YES
None
NO
Inter-RAT Handover Based on Coverage Inter-RAT Handover Based on DL QoS Inter-RAT Handover Based on Service Inter-RAT Handover Enumeration Based on Load Type
NO_CAPABILITY(C ell capability unknown), GSM~1 NO_CAPABILITY, GPRS~2 EDGE GSM, GPRS, EDGE
None
None
3GPP Specifications
Interval Type
0~240000
0~240000
ms
120000
Interval Type
1~256
1~256
None
230
Interval Type
1~256
1~256
None
Overload Control
Interval Type
1~65535
1~65535
ms
5000
Overload Control
Interval Type
1~99
0.01~0.99, step:0.01
per cent
68
Overload Control
Interval Type
1~65535
1~65535
ms
3000
Configuration Management
Enumeration Type
None
None
3GPP Specifications
Interval Type
300~10000
300~10000
ms
5000
3GPP Specifications
Interval Type
300~10000
300~10000
ms
5000
3GPP Specifications
Interval Type
300~10000
300~10000
ms
5000
None
Enumeration Type
None
None
None
Interval Type
0~100
0~100
None
96
Interval Type
1~360
10~3600, step: 10
Overload Control
Interval Type
100~200
1~2, step:0.01
per cent
130
None
Interval Type
20~99
20~99
None
30
Configuration Management
Enumeration Type
None
None
Enumeration Type
Band1, Band2, Band3, Band4, Band5, Band6, Band7, Band8, Band9, DependOnNCell, BandIndNotUsed
Band1, Band2, Band3, Band4, Band5, Band6, Band7, Band8, Band9, DependOnNCell, BandIndNotUsed
None
DependOnNCell
Enumeration Type
Band1, Band2, Band3, Band4, Band5, Band6, Band7, Band8, Band9, DependOnNCell, BandIndNotUsed
Band1, Band2, Band3, Band4, Band5, Band6, Band7, Band8, Band9, DependOnNCell, BandIndNotUsed
None
DependOnNCell
Service Steering and Load Sharing in RRC Connection Enumeration Setup Type
Band1, Band2, Band3, Band4, Band5, Band6, Band7, Band8, Band9, DependOnNCell, BandIndNotUsed
BAND1, BAND2, BAND3, BAND4, BAND5, BAND6, BAND7, BAND8, BAND9, DependOnNCell, BANDINDNOTUSED None
None
Service Steering and Load Sharing in RRC Connection Enumeration Setup Type
Band1, Band2, Band3, Band4, Band5, Band6, Band7, Band8, Band9, DependOnNCell, BandIndNotUsed
BAND1, BAND2, BAND3, BAND4, BAND5, BAND6, BAND7, BAND8, BAND9, DependOnNCell, BANDINDNOTUSED None
None
Service Steering and Load Sharing in RRC Connection Setup Interval Type
0~100
0~100
per cent
None
Service Steering and Load Sharing in RRC Connection Setup Interval Type
0~100
0~100
per cent
None
Service Steering and Load Sharing in RRC Connection Setup Interval Type
0~100
0~100
per cent
None
Service Steering and Load Sharing in RRC Connection Setup Interval Type
0~100
0~100
per cent
Service Steering and Load Sharing in RRC Connection Enumeration Setup Type
None
Interval Type
0~16383
0~16383
None
None
Interval Type
0~16383
0~16383
None
None
Service Steering and Load Sharing in RRC Connection Setup Interval Type
0~16383
0~16383
None
None
Service Steering and Load Sharing in RRC Connection Setup Interval Type
0~16383
0~16383
None
None
Service Steering and Load Sharing in RRC Connection Setup Interval Type
0~16383
0~16383
None
None
Interval Type
0~16383
0~16383
None
None
Service Steering and Load Sharing in RRC Connection Setup Interval Type
0~16383
0~16383
None
None
Service Steering and Load Sharing in RRC Connection Setup Interval Type
0~16383
0~16383
None
None
Enumeration Type
TRUE, FALSE
TRUE, FALSE
None
None
Enumeration Type
TRUE, FALSE
TRUE, FALSE
None
None
Service Steering and Load Sharing in RRC Connection Enumeration Setup Type
FALSE, TRUE
FALSE, TRUE
None
None
Service Steering and Load Sharing in RRC Connection Enumeration Setup Type
FALSE, TRUE
FALSE, TRUE
None
None
BSC/RNC Clock
Interval Type
0~31
0~31
None
0~31
None
OFF, ON
None
OFF
BSC/RNC Clock
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
OFF
BSC/RNC Clock
Enumeration Type
None
NO
Flow Control
Enumeration Type
OFF, ON
OFF, ON
None
ON
Enumeration Type
REHOSTRIGHNO W(RehostRighNow) , REHOSTDELAY(R ehostDelay), REHOSTRIGHNOW, REHOSTWHEN(Re REHOSTDELAY, hostWhen) REHOSTWHEN None
None
Interval Type
2000~60000
2000~60000
ms
3000
3GPP Specifications
Interval Type
1~10000
1~10000
ms
5000
3GPP Specifications
Interval Type
1~20000
1~20000
ms
10000
3GPP Specifications
Interval Type
1~20000
1~20000
ms
15000
3GPP Specifications
Interval Type
1~20000
1~20000
ms
20000
3GPP Specifications
Interval Type
1~10000
1~10000
ms
3000
3GPP Specifications
Interval Type
1~60000
1~60000
ms
45000
3GPP Specifications
Interval Type
1~10000
1~10000
ms
5000
3GPP Specifications
Interval Type
1~10000
1~10000
ms
5000
3GPP Specifications
Interval Type
1~20000
1~20000
ms
10000
Interval Type
2000~60000
2000~60000
ms
5000
Interval Type
-29~29
-14.5~14.5, step:0.5
dB
None
String Type
None
1~31 characters
None
None
None
String Type
None
1~250 characters
None
None
None
String Type
None
1~250 characters
None
None
Interval Type
0~65535
0~65535
None
Interval Type
1~4096
1~4096
300
Enumeration Type
D4000
Enumeration Type
D4000
Enumeration Type
D1000
Inter-RAT Handover Based on Coverage Inter-RAT Handover Based on DL QoS PS Handover Between UMTS and GPRS Inter-RAT Handover Based on Service Inter-RAT Handover Enumeration Based on Load Type
None
None
Flow Control
Interval Type
30~100
30~100
per cent
85
Flow Control
Interval Type
30~100
30~100
per cent
85
Flow Control
Interval Type
30~100
30~100
per cent
70
Flow Control
Interval Type
30~100
30~100
per cent
70
Flow Control
Enumeration Type
ON, OFF
ON, OFF
None
ON
None
RESERVED_SWIT CH_0_BIT1, RESERVED_SWIT CH_0_BIT2, RESERVED_SWIT CH_0_BIT3, RESERVED_SWIT CH_0_BIT4, RESERVED_SWIT CH_0_BIT5, RESERVED_SWIT CH_0_BIT6, RESERVED_SWIT CH_0_BIT7, RESERVED_SWIT CH_0_BIT8, RESERVED_SWIT CH_0_BIT9, RESERVED_SWIT CH_0_BIT10, RESERVED_SWIT CH_0_BIT11, RESERVED_SWIT CH_0_BIT12, RESERVED_SWIT CH_0_BIT13, RESERVED_SWIT CH_0_BIT14, RESERVED_SWIT CH_0_BIT15, RESERVED_SWIT CH_0_BIT16, RESERVED_SWIT CH_0_BIT17, RESERVED_SWIT
RESERVED_SWITC H_0_BIT1, RESERVED_SWITC H_0_BIT2, RESERVED_SWITC H_0_BIT3, RESERVED_SWITC H_0_BIT4, RESERVED_SWITC H_0_BIT5, RESERVED_SWITC H_0_BIT6, RESERVED_SWITC H_0_BIT7, RESERVED_SWITC H_0_BIT8, RESERVED_SWITC H_0_BIT9, RESERVED_SWITC H_0_BIT10, RESERVED_SWITC H_0_BIT11, RESERVED_SWITC H_0_BIT12, RESERVED_SWITC H_0_BIT13, RESERVED_SWITC H_0_BIT14, RESERVED_SWITC H_0_BIT15, RESERVED_SWITC H_0_BIT16, RESERVED_SWITC H_0_BIT17, RESERVED_SWITC None
None
None
RESERVED_SWIT CH_1_BIT1, RESERVED_SWIT CH_1_BIT2, RESERVED_SWIT CH_1_BIT3, RESERVED_SWIT CH_1_BIT4, RESERVED_SWIT CH_1_BIT5, RESERVED_SWIT CH_1_BIT6, RESERVED_SWIT CH_1_BIT7, RESERVED_SWIT CH_1_BIT8, RESERVED_SWIT CH_1_BIT9, RESERVED_SWIT CH_1_BIT10, RESERVED_SWIT CH_1_BIT11, RESERVED_SWIT CH_1_BIT12, RESERVED_SWIT CH_1_BIT13, RESERVED_SWIT CH_1_BIT14, RESERVED_SWIT CH_1_BIT15, RESERVED_SWIT CH_1_BIT16, RESERVED_SWIT CH_1_BIT17, RESERVED_SWIT
RESERVED_SWITC H_1_BIT1, RESERVED_SWITC H_1_BIT2, RESERVED_SWITC H_1_BIT3, RESERVED_SWITC H_1_BIT4, RESERVED_SWITC H_1_BIT5, RESERVED_SWITC H_1_BIT6, RESERVED_SWITC H_1_BIT7, RESERVED_SWITC H_1_BIT8, RESERVED_SWITC H_1_BIT9, RESERVED_SWITC H_1_BIT10, RESERVED_SWITC H_1_BIT11, RESERVED_SWITC H_1_BIT12, RESERVED_SWITC H_1_BIT13, RESERVED_SWITC H_1_BIT14, RESERVED_SWITC H_1_BIT15, RESERVED_SWITC H_1_BIT16, RESERVED_SWITC H_1_BIT17, RESERVED_SWITC None
None
None
Interval Type
0~4294967295
0~4294967295
None
None
Interval Type
0~4294967295
0~4294967295
None
4294967295
None
Interval Type
0~255
0~255
None
None
Interval Type
0~255
0~255
None
255
Security Management
Interval Type
1~60
1~60
min
None
Interval Type
2000~60000
2000~60000
ms
5000
License Management
Enumeration Type
None
NO
None
Interval Type
2~5
2~5
None
Interval Type
2~5
2~5
RestrictionFixed, RestrictionFlexible
None
None
Faulty Management
None
Flow Control
Interval Type
0~10
0~10
None
SRB over HSDPA HSUPA 2ms TTI SRB over HSUPA Downlink Enhanced L2 Downlink 64 QAM 22 MIMO CPC - DTX / DRX CPC - HSSCCH less operation
SRB_OVER_HSDPA, SRB_OVER_HSUPA, TTI_2MS, MIMO, 64QAM, L2_ENHANCE, DTX_DRX, HSSCCH_LESS_OP ERATION None
None
None
Interval Type
1~100
1~100
None
Conversational QoS Class Streaming QoS Class Interactive QoS Class Background Enumeration QoS Class Type
AM, UM, TM TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
AM, UM, TM TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
None
None
None
None
None
Interval Type
0~4992
0~4992
bit
None
Interval Type
-350~150
-35~15, step:0.1
dB
None
Interval Type
-350~150
-35~15, step:0.1
dB
None
3GPP Specifications
Interval Type
1~10000
1~10000
ms
5000
3GPP Specifications
Interval Type
1~10000
1~10000
ms
5000
3GPP Specifications
Interval Type
1~10000
1~10000
ms
10000
3GPP Specifications
Interval Type
1~10000
1~10000
ms
5000
BSC/RNC Clock
Interval Type
0~4095
0~4095
None
None
3GPP Specifications
Interval Type
0~4095
0~4095
None
None
0~4095
0~4095
None
None
None
None
Interval Type
0 None
None
String Type
None
1~20 characters
None
None
Enumeration Type
None
None
String Type
None
0~200 characters
None
None
None
Interval Type
20~99 ORIGCONVCALLE ST, ORIGSTREAMCAL LEST, ORIGINTERCALLE ST, ORIGBKGCALLES T, ORIGSUBSTRAFF CALLEST, TERMCONVCALLE ST, TERMSTREAMCA LLEST, TERMINTERCALL EST, TERMBKGCALLES T, EMERGCALLEST, INTERRATCELLRE SELEST, INTERRATCELLC HGORDEREST, REGISTEST, DETACHEST, ORIGHIGHPRIORS IGEST, ORIGLOWPRIORS IGEST, CALLREEST, TERMHIGHPRIOR SIGEST, TERMLOWPRIOR SIGEST, TERMCAUSEUNK
20~99 None ORIGCONVCALLEST , ORIGSTREAMCALLE ST, ORIGINTERCALLES T, ORIGBKGCALLEST, ORIGSUBSTRAFFCA LLEST, TERMCONVCALLES T, TERMSTREAMCALL EST, TERMINTERCALLES T, TERMBKGCALLEST, EMERGCALLEST, INTERRATCELLRES ELEST, INTERRATCELLCHG ORDEREST, REGISTEST, DETACHEST, ORIGHIGHPRIORSI GEST, ORIGLOWPRIORSIG EST, CALLREEST, TERMHIGHPRIORSI GEST, TERMLOWPRIORSI GEST, TERMCAUSEUNKNO WN, MBMSCALLEST, DEFAULTEST None
20
None
0~65534
0~65534
None
200
0~100
0~100
per cent
60
3GPP Specifications
Interval Type
0~15
0~15
3GPP Specifications
Interval Type
1~10000
1~10000
ms
5000
3GPP Specifications
Interval Type
1~10000
1~10000
ms
5000
3GPP Specifications
Interval Type
1~10000
1~10000
ms
5000
3GPP Specifications
Interval Type
1~5000
1~5000
ms
350
3GPP Specifications
Interval Type
1~3000
1~3000
ms
1000
3GPP Specifications
Interval Type
1~10000
1~10000
ms
5000
3GPP Specifications
Interval Type
1~10000
1~10000
ms
5000
Enumeration Type
None
None
Interval Type
0~2047
0~2047
None
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type Flow Control Transmission Recourse Sharing on Enumeration Iub/Iur Interface Type
None
SHARE, EXCLUSIVE
None
Overbooking on IP Transmission Transmission Recourse Sharing on Enumeration Iub/Iur Interface Type Transmission Recourse Sharing on Enumeration Iub/Iur Interface Type
SHARE, EXCLUSIVE
None
SHARE(Share), EXCLUSIVE(Exclus ive) SHARE, EXCLUSIVE None COMMISSIONING( Commissioning), UPGRADE(Upgrad e), COMMISSIONING, RESTORE(Restore UPGRADE, ) RESTORE
SHARE
Configuration Management
Enumeration Type
None
None
Interval Type
1200~20000
5000~20000(UNI), 1200~20000(NNI)
ms
None
String Type
None
1~63 character
None
None
None
String Type
None
1~50 characters
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
OFF
3GPP Specifications
Interval Type
0~5
0~5
None
None
Interval Type
0~4294967295
0~4294967295
None
3GPP Specifications
RSVDBIT1_BIT1, RSVDBIT1_BIT2, RSVDBIT1_BIT3, RSVDBIT1_BIT4, RSVDBIT1_BIT5, RSVDBIT1_BIT6, RSVDBIT1_BIT7, RSVDBIT1_BIT8, RSVDBIT1_BIT9, RSVDBIT1_BIT10, RSVDBIT1_BIT11, RSVDBIT1_BIT12, RSVDBIT1_BIT13, RSVDBIT1_BIT14, RSVDBIT1_BIT15, RSVDBIT1_BIT16, RSVDBIT1_BIT17, RSVDBIT1_BIT18, RSVDBIT1_BIT19, RSVDBIT1_BIT20, RSVDBIT1_BIT21, RSVDBIT1_BIT22, RSVDBIT1_BIT23, RSVDBIT1_BIT24, RSVDBIT1_BIT25, RSVDBIT1_BIT26, RSVDBIT1_BIT27, RSVDBIT1_BIT28, RSVDBIT1_BIT29, RSVDBIT1_BIT30, This parameter is set RSVDBIT1_BIT31, to 0 or 1 according to RSVDBIT1_BIT32 the related domains. None
None
Admission Control
RSVDBIT1, RSVDBIT2, RSVDBIT3, RSVDBIT4, RSVDBIT5, RSVDBIT6, RSVDBIT7, RSVDBIT8, RSVDBIT9, RSVDBIT10, RSVDBIT11, RSVDBIT12, RSVDBIT13, RSVDBIT14, RSVDBIT15, RSVDBIT16 RSVDBIT1, RSVDBIT2, RSVDBIT3, RSVDBIT4, RSVDBIT5, RSVDBIT6, RSVDBIT7, RSVDBIT8, RSVDBIT9, RSVDBIT10, RSVDBIT11, RSVDBIT12, RSVDBIT13, RSVDBIT14, RSVDBIT15, RSVDBIT16
RSVDBIT1, RSVDBIT2, RSVDBIT3, RSVDBIT4, RSVDBIT5, RSVDBIT6, RSVDBIT7, RSVDBIT8, RSVDBIT9, RSVDBIT10, RSVDBIT11, RSVDBIT12, RSVDBIT13, RSVDBIT14, RSVDBIT15, RSVDBIT16 RSVDBIT1, RSVDBIT2, RSVDBIT3, RSVDBIT4, RSVDBIT5, RSVDBIT6, RSVDBIT7, RSVDBIT8, RSVDBIT9, RSVDBIT10, RSVDBIT11, RSVDBIT12, RSVDBIT13, RSVDBIT14, RSVDBIT15, RSVDBIT16
None
None
Admission Control
None
None
Admission Control
RSVDBIT1, RSVDBIT2, RSVDBIT3, RSVDBIT4, RSVDBIT5, RSVDBIT6, RSVDBIT7, RSVDBIT8, RSVDBIT9, RSVDBIT10, RSVDBIT11, RSVDBIT12, RSVDBIT13, RSVDBIT14, RSVDBIT15, RSVDBIT16
RSVDBIT1, RSVDBIT2, RSVDBIT3, RSVDBIT4, RSVDBIT5, RSVDBIT6, RSVDBIT7, RSVDBIT8, RSVDBIT9, RSVDBIT10, RSVDBIT11, RSVDBIT12, RSVDBIT13, RSVDBIT14, RSVDBIT15, RSVDBIT16
None
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
None
None
Interval Type
0~4294967295
0~4294967295
None
None
Interval Type
0~4294967295
0~4294967295
None
None
None
Interval Type
0~4294967295
0~4294967295
None
None
Interval Type
0~4294967295
0~4294967295
None
None
Interval Type
0~4294967295
0~4294967295
None
None
Interval Type
0~4294967295
0~4294967295
None
None
Interval Type
0~4294967295
0~4294967295
None
None
Interval Type
0~4294967295
0~4294967295
None
TCP Accelerator
Interval Type
0~4294967295
0~4294967295
None
Interval Type
0~4294967295
0~4294967295
None
None
Interval Type
0~4294967295
0~4294967295
None
Interval Type
0~4294967295
0~4294967295
None
Interval Type
0~4294967295
0~4294967295
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
None
Interval Type
0~4294967295
0~4294967295
None
Interval Type
0~4294967295
0~4294967295
None
Interval Type
0~4294967295
0~4294967295
None
Interval Type
0~4294967295
0~4294967295
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
None
None
Interval Type
0~4294967295
0~4294967295
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
None
None
Interval Type
0~4294967295
0~4294967295
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
None
None
Interval Type
0~4294967295
0~4294967295
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
None
None
Interval Type
0~4294967295
0~4294967295
None
None
Interval Type
0~4294967295
0~4294967295
None
None
None
Interval Type
0~4294967295
0~4294967295
None
None
Interval Type
0~4294967295
0~4294967295
None
None
None
Interval Type
0~4294967295
0~4294967295
None
None
Interval Type
0~4294967295
0~4294967295
None
None
None
Enumeration Type
None
None
0~4294967295
0~4294967295
None
4294967295
1~5
1~5
per cent
None
Interval Type
1~65535
1~65535
180
Interval Type
1~65535
1~65535
180
OFF, ON
OFF, ON
None
None
None
None
None
None
None
None
Enhanced CELL-FACH
Interval Type
1~65535
1~65535
180
Interval Type
1~65535
1~65535
180
Enumeration Type
D16000
Enumeration Type
D8, D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, D16k, D24k, D32k, D48k, D64k, D96k, D128k, D192k, D256k, D384k, D512k, D768k
8, 16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k byte
D64
Enumeration Type
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D5000
Enumeration Type
D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, D16k, D24k, D32k, D48k, D64k, D96k, D128k, D192k, D256k, D384k, D512k, D768k
16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k byte
D1024
Enumeration Type
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D0
Enhanced CELL-FACH
Enumeration Type
D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, D16k, D24k, D32k, D48k, D64k, D96k, D128k, D192k, D256k, D384k, D512k, D768k
16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k byte
D1024
Enhanced CELL-FACH
Enumeration Type
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D0
Enumeration Type
D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, D16k, D24k, D32k, D48k, D64k, D96k, D128k, D192k, D256k, D384k, D512k, D768k
16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k byte
D1024
Enumeration Type
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D0
Enumeration Type
D16, D32, D64, D128, D256, D512, D1024, D2k, D3k, D4k, D6k, D8k, D12k, D16k, D24k, D32k, D48k, D64k, D96k, D128k, D192k, D256k, D384k, D512k, D768k
16, 32, 64, 128, 256, 512, 1024, 2k, 3k, 4k, 6k, 8k, 12k, 16k, 24k, 32k, 48k, 64k, 96k, 128k, 192k, 256k, 384k, 512k, 768k byte
D1024
Enumeration Type
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D0
0~100
0~100
per cent
12
0~100
0~100
per cent
25
500~60000
500~60000
ms
1000
500~60000
500~60000
ms
3000
IP Transmission Introduction on Iub Interface Interval Type ATM Transmission Introduction Package
500~60000
500~60000
ms
1000
Interval Type
0~4294967295
0~4294967295
None
None
None
Interval Type
0~1000
0~1000
None
None
Interval Type
1~100
1~100
None
IP Transmission Introduction on Iub Interface Hybrid Iub IP Transmission ATM/IP Dual Stack Node B Interval Type
1~3000000
1~3000000
kbit/s
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~4000000
0~4000000
kbit/s
None
None
Interval Type
512~149000
512~149000
kbit/s
None
ATM Transmission Introduction Package Permanent AAL5 Connections for Control Plane Traffic Interval Type
100~1999
100~1999
None
None
Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Call Admission Based on Used AAL2 Path Bandwidth CBR, rt-VBR, nrt-VBR, UBR ATM QoS Classes Overbooking on ATM Transmission ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type Permanent AAL5 Connections for Control Plane Traffic ATM Transmission Introduction Package IP routing Based Hub Node B Interval Type ATM Transmission Introduction Package
100~1999
100~1999
None
None
100~1999
100~1999
None
None
Interval Type
100~1999
100~1999
None
None
Interval Type
768~1280
768~1280
chip
1172
Interval Type
768~1280
768~1280
chip
876
None
Interval Type
0~15
0~15
None
None
Interval Type
0~1399
0~1399
None
None
Enumeration Type
None
None
Interval Type
35000~120000
35000~120000
ms
35000
None
Interval Type
0~65535
0~65535
None
None
TRUE(True), FALSE(False)
TRUE, FALSE
None
FALSE
3GPP Specifications
Interval Type
0~149
0~149
chip
50
None
Any Type
None
Valid command string, without the ';'at the end of the string. None
None
UBR+ ATM QoS Class CBR, rt-VBR, nrt-VBR, UBR ATM QoS Classes ATM Transmission Introduction Package
Interval Type
30~117924
30~117924
None
None
3GPP Specifications
Interval Type
0~15
0~15
None
None
OFF(OFF), ON(ON)
OFF, ON
None
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
None
Faulty Management
Interval Type
1~2147483646
1~2147483646
None
IP Transmission Introduction on Iub Interface ATM/IP Dual Stack Node B Interval Type
0~1199
0~1199
None
None
Security Management
Compound Type
2000-1-1~2037-12-31 None
None
Faulty Management
Compound Type
2000-1-1~2037-12-31 None
None
Faulty Management
Compound Type
2000-1-1~2037-12-31 None
None
Faulty Management
Interval Type
7~90
7~90
None
None
Enumeration Type
1.00E-06
Configuration Management
Interval Type
1~31
1~31
None
None
Enumeration Type
None
None
None
Enumeration Type
HIGH(HIGH), LOW(LOW)
HIGH, LOW
None
None
0~63
0~63
None
None
None
Enumeration Type
SINGLE, ALL
None
ALL
Overload Control
Enumeration Type
None
MBMS service
None
Interval Type
1024~65535
1000~65535
None
None
None
Interval Type
1024~65535
1000~65535
None
None
None
IP Address Type
None
None
Enumeration Type
kbit/s
None
Service Steering and Load Sharing in RRC Connection Enumeration Setup Type
ON, OFF
ON, OFF
None
OFF
Service Steering and Load Sharing in RRC Connection Enumeration Setup Type
ON, OFF
ON, OFF
None
OFF
Interval Type
0~4294967295
None
None
3GPP Specifications
Enumeration Type
None
Security Management
Enumeration Type
SYSTEM(System Command), CONFIG(Configurat ion Management), MAINTAIN(Mainten ance Management), STAT(Statistic Measurement), SYSTEM, CONFIG, ALARM(Alarm MAINTAIN, STAT, Management) ALARM
None
None
STREAMING, BACKGROUND
STREAMING, BACKGROUND
None
None
UMTS(UMTS)
UMTS
None
None
One Tunnel
Enumeration Type
NO(GGSN), YES(SGSN)
NO, YES
None
None
Interval Type
0~255
0~255
None
10
None
None
Intra RNC Cell Update Inter RNC Cell Update HCS (Hierarchical Cell Structure) Multi Frequency Band Networking Management Interval Type
-53~45
-105~91, step:2
dB
Inter-RAT Handover Based on Coverage Inter-RAT Handover Based on DL QoS PS Handover Between UMTS and GPRS Inter-RAT Handover Based on Service Inter-RAT Handover Enumeration Based on Load Type Faulty Management Enumeration Type
HO_TO_GSM_SH OULD_BE_PERFO RM, HO_TO_GSM_SH OULD_NOT_BE_P ERFORM, HO_TO_GSM_SHA LL_NOT_BE_PERF ORM unshielded(Unshiel ded), shielded(Shielded)
None
unshielded, shielded
None
None
Interval Type
0~63
0~63
None
Interval Type
0~120
0~120
60
-24~0
-24~0
dB
None
Interval Type
-24~0
-24~0
dB
-24
Inter RNC Soft Handover Interface Message Tracing RNC Node Redundancy
None
Enumeration Type
None
TRUE
Enumeration Type
None
FALSE
SIB2, SIB4, SIB12, SIB2, SIB4, SIB12, SIB18, SIB11BIS SIB18, SIB11BIS
None
None
FACH, DCH_3.4K_SIGNALLI NG, DCH_6.8K_SIGNALLI NG, DCH_13.6K_SIGNAL LING, DCH_27.2K_SIGNAL LING None
None
Interval Type
0~186
0~186
None
None
0~186
0~186
None
None
0~15
0~15
None
None
FALSE, TRUE
FALSE, TRUE
None
TRUE
Interval Type
0~15
0~15
None
None
NBAMR_BITRATE _4.75K, NBAMR_BITRATE _5.15K, NBAMR_BITRATE _5.90K, NBAMR_BITRATE _6.70K, NBAMR_BITRATE _7.40K, NBAMR_BITRATE _7.95K, NBAMR_BITRATE _10.20K, 4.75, 5.15, 5.90, 6.70, NBAMR_BITRATE 7.40, 7.95, 10.20, _12.20K 12.20 kbit/s WBAMR_BITRATE _6.60K, WBAMR_BITRATE _8.85K, WBAMR_BITRATE _12.65K, WBAMR_BITRATE _14.25K, WBAMR_BITRATE _15.85K, WBAMR_BITRATE _18.25K, WBAMR_BITRATE _19.85K, WBAMR_BITRATE _23.05K, 6.60, 8.85, 12.65, WBAMR_BITRATE 14.25, 15.85, 18.25, _23.85K 19.85, 23.05, 23.85
NBAMR_BITRA TE_12.20K
AMR-WB (Adaptive Multi Rate Wide Band) AMR/WB-AMR Speech Rates Enumeration Control Type
kbit/s
WBAMR_BITRA TE_23.85K
Enumeration Type
kbit/s
D3.4
Enumeration Type
kbit/s
D3.4
None
IP Address Type
None
None
None
IP Address Type
None
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~100
0~100
per cent
15
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF None
None
Interval Type
0~100
0~100
None
100
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
None
Interval Type
0~100
0~100
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~100
0~100
per cent
15
HCS (Hierarchical Cell Structure) Multi Frequency Band Networking Management Interval Type
-16~10
-32~20, step:2
dB
Enumeration Type
D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, 0, 1, 2, 3, 4, 5, 6, 7, 8, D13, D14, D15, 9, 10, 11, 12, 13, 14, D16, D17 15, 16, 17 None
None
Interval Type
0~3
0~3
None
Interval Type
0~3
0~3
None
Interval Type
0~3
0~3
None
Interval Type
0~3
0~3
None
Enumeration Type
None
None
Flow Control
Interval Type
30~100
30~100
per cent
80
Flow Control
Interval Type
30~100
30~100
per cent
70
Enumeration Type
B0000(B0000), B0001(B0001), B0010(B0010), B0011(B0011), B0100(B0100), B0101(B0101), B0110(B0110), B0111(B0111), B1000(B1000), B1001(B1001), B1010(B1010), B1011(B1011), B1100(B1100), B1101(B1101), B1110(B1110), B1111(B1111)
B0000, B0001, B0010, B0011, B0100, B0101, B0110, B0111, B1000, B1001, B1010, B1011, B1100, B1101, B1110, B1111
None
B0000
Configuration Management
Enumeration Type
DATE(Input with date), WEEK(Input with week), DATEWEEK(Input DATE, WEEK, with date and week) DATEWEEK
None
None
Cell ID + RTT Function Based LCS OTDOA Based LCS A-GPS Based LCS LCS over Iur Bit Field Type Faulty Enumeration Management Type
CELLID_CENTER, CELLID_RTT, OTDOA, AGPS CLOSE(Close), OPEN(Open) JAN(January), FEB(February), MAR(March), APR(April), MAY(May), JUN(June), JUL(July), AUG(August), SEP(September), OCT(October), NOV(November), DEC(December)
None None
None OPEN
Configuration Management
Enumeration Type
JAN, FEB, MAR, APR, MAY, JUN, JUL, AUG, SEP, OCT, NOV, DEC None
None
Flow Control
Interval Type
30~100
30~100
per cent
70
Flow Control
Interval Type
30~100
30~100
per cent
60
System Redundancy
Interval Type
30~100
30~100
per cent
70
System Redundancy
Interval Type
30~100
30~100
per cent
75
System Redundancy
Interval Type
30~100
30~100
per cent
60
System Redundancy
Interval Type
30~100
30~100
per cent
65
Flow Control
Interval Type
2~2000
2~2000
None
10
Configuration Management
Interval Type
0~27
0~27
None
None
None
Interval Type
0,2,4,8,10,12,14,16, 0, 2, 4, 8, 10, 12, 14, 18,20,22,24,26 16, 18, 20, 22, 24, 26 None
None
None
Interval Type
0,2,4,8,10,12,14,16, 0, 2, 4, 8, 10, 12, 14, 18,20,22,24,26 16, 18, 20, 22, 24, 26 None
None
None
Interval Type
0,2,4,8,10,12,14,16, 0, 2, 4, 8, 10, 12, 14, 18,20,22,24,26 16, 18, 20, 22, 24, 26 None
None
Interval Type
0~5,8~27
Interval Type
0~5, 8~27 None 0, 2, 4, 6, 8, 10, 12, 0,2,4,6,8,10,12,14,1 14, 16, 18, 20, 22, 24, 6,18,20,22,24,26 26 None
None
None
None
Interval Type
0, 2, 4, 6, 8, 10, 12, 0,2,4,6,8,10,12,14,1 14, 16, 18, 20, 22, 24, 6,18,20,22,24,26 26 None 0,2,4,8,10,12,14,16, 0, 2, 4, 8, 10, 12, 14, 18,20,22,24,26 16, 18, 20, 22, 24, 26 None
None
None
Interval Type
None
Faulty Management
Interval Type
0~27
0~27
None
None
Faulty Management
Interval Type
0~27
0~27
None
None
None
Interval Type
0,2,4,8,10,12,14,16, 0, 2, 4, 8, 10, 12, 14, 18,20,22,24,26 16, 18, 20, 22, 24, 26 None
None
None
Interval Type
0~5,8~27
0~5, 8~27
None
None
None
Interval Type
0,2,4,8,10,12,14,16, 0, 2, 4, 8, 10, 12, 14, 18,20,22,24,26 16, 18, 20, 22, 24, 26 None
None
0~65535
0~65535
None
None
Shared Network Support in Connected Mode IMSI Based Enumeration Handover Type
TRUE, FALSE
TRUE, FALSE
None
None
Inter-RAT Handover Based on Service Inter-RAT Handover Enumeration Based on Load Type
OFF, ON
OFF, ON
None
OFF
None
Interval Type
1~60
1~60
min
None
Interval Type
1~16777215
None
None
Enumeration Type
None
None
String Type
None
1~11 characters
None
None
Enumeration Type
OFF, ON
OFF, ON
None
OFF
Enumeration Type
WNF, DNF
None
WNF
None
Enumeration Type
1000M(1000M), AUTO(AUTO)
1000M, AUTO
None
None
Interval Type
0~10,255
255
Interval Type
1~8
1~8
None
None
Interval Type
1~8
1~8
None
None
Interval Type
2~11
2~11
None
None
Interval Type
0~15
0~15
None
None
None
Interval Type
1024~3584
1024~3584
None
None
None
Enumeration Type
YES, NO
None
None
Interval Type
0~100
0~1, step:0.01
per cent
70
Interval Type
0~100
0~1, step:0.01
per cent
Interval Type
0~100
0~1, step:0.01
per cent
45
3GPP Specifications
Interval Type
0~4
0~4
None
None
DCH(UL_DCH,DL_ DCH), HSDPA(UL_DCH,D L_HSDSCH), HSPA(UL_EDCH,D L_HSDSCH) DCH, HSDPA, HSPA None
DCH
TRUE, FALSE
TRUE, FALSE
None
FALSE
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~100
0~100
per cent
15
Enhanced CELL-FACH
Interval Type
1~1000
1~1000
kbit/s
32
Enhanced CELL-FACH
Interval Type
1~2000
1~2000
kbit/s
512
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF None
None
Interval Type
0~100
0~100
None
100
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
None
Interval Type
0~100
0~100
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~100
0~100
per cent
15
None
String Type
None
1~100 characters
None
None
BSC/RNC Clock
Interval Type
1~4
1~4
None
None
BSC/RNC Clock
Interval Type
1~4
1~4
None
None
None
Interval Type
1~1000
1~1000
None
None
None
Interval Type
0~335
0~335
None
None
BSC/RNC Clock
Enumeration Type
BITS1-2MHZ(2MHZ Building Integrated Timing Supply system 1), BITS22MHZ(2MHZ Building Integrated Timing Supply system 2), BITS12MBPS(2MBPS Building Integrated Timing Supply system 1), BITS22MBPS(2MBPS Building Integrated Timing Supply system 2), 8KHZ(8KHZ), GPS(Globe Positioning System), LINE1_8KHZ(8KHZ line1), LINE2_8KHZ(8KHZ line2), BITS1T1BPS(T1BPS Building Integrated Timing Supply system 1), BITS2T1BPS(T1BPS Building Integrated Timing Supply system 2) TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
BITS1-2MHZ, BITS22MHZ, BITS12MBPS, BITS22MBPS, GPS, 8KHZ, LINE1_8KHZ, LINE2_8KHZ, BITS1T1BPS, BITS2T1BPS None TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
None
None
None
None
Interval Type
45~90
45~90
min
60
Configuration Management
Interval Type
0~11
0~11
None
None
Configuration Management
Interval Type
1~11
1~11
None
None
None
Interval Type
0~11
0~11
None
None
None
Interval Type
0~11
0~11
None
None
None
Interval Type
0~11
0~11
None
None
None
Interval Type
0~11
0~11
None
None
None None
0~11 0~11
0~11 0~11
None None
None None
Faulty Management
Interval Type
0~11
0~11
None
None
None
Interval Type
0~11
0~11
None
None
Interval Type
0~11
0~11
None
None
String Type
None
1~249 characters
None
None
NO, YES
NO, YES
None
YES
RT(Real time service), NRT(Non real time service), ALL(All service) RT, NRT, ALL
None
NRT
SRNS Relocation (UE Not Involved) Interval Type 0~400 0~400 ms 400
1~255
1~255
60
1~100
1~100
1~255
1~255
30
SRNS Relocation Introduction Package SRNS Relocation (UE Not Involved) SRNS Relocation with Hard Handover SRNS Relocation with Cell/URA Update Lossless SRNS Relocation Bit Field Type
SRNSR_DSCR_IU R_RESRCE_SWIT CH, SRNSR_DSCR_LO C_SEPRAT_SWIT CH, SRNSR_DSCR_PR OPG_DELAY_SWI TCH, SRNSR_DSCR_SE PRAT_DUR_SWIT CH
None
1~65535
1~65535
60
None None
None DES
Interval Type
-350~150
dB
-50
Faulty Management
Interval Type
20~99
20~99
per cent
75
Faulty Management
Interval Type
30~100
30~100
per cent
85
Conversational QoS Class Streaming QoS Class Interactive QoS Class Background Enumeration QoS Class Type
SPEECH, UNKNOWN
SPEECH, UNKNOWN
None
None
Faulty Management
Interval Type
20~99
20~99
per cent
80
Faulty Management
Interval Type
30~100
30~100
per cent
85
Intra RNC Cell Update Inter RNC Cell Update HCS (Hierarchical Cell Structure)
Interval Type
-53~45
-105~91, step:2
dB
Intra RNC Cell Update Inter RNC Cell Update HCS (Hierarchical Cell Structure) Multi Frequency Band Networking Management Interval Type
-16~10,127
dB
Configuration Management
Interval Type
0~7
0~7
None
None
None
Interval Type
0~7
0~3
None
None
None
Interval Type
0~7
0~7
None
None
None None
None None
Security Management
Compound Type
None
None
Compound Type
hour, min
00:00~23:59
None
None
Security Management
Compound Type
None
Faulty Management
Compound Type
00:00:00~23:59:59
None
None
Faulty Management
Compound Type
00:00:00~23:59:59
None
None
None
Enumeration Type
UBR, CBR, RTVBR, NRTVBR, UBR, CBR, RTVBR, UBR_PLUS NRTVBR, UBR_PLUS None
None
Dynamic Channel Configuration Control (DCCC) Inter-RAT Handover Based on DL QoS Interval Type
1~512
1~512
None
None
Faulty Management
Interval Type
1~65535
1~65535
None
None
None
ACTIVE
Compound Type
HOUR, MIN
00:00~23:59
min
None
Compound Type
HOUR, MIN
00:00~23:59
min
None
Compound Type
HOUR, MIN
00:00~23:59
min
None
Interval Type
1000~300000
1000~300000
ms
20000
3GPP Specifications
Interval Type
1~300
1~300
None
20
Interval Type
3~67
3~67
None
67
Security Management
Compound Type
2000-1-1~2037-12-31 None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
OFF
Enumeration Type
kbit/s
D16
Enhanced CELL-FACH
Interval Type
1~1000
1~1000
kbit/s
32
D8, D16, D32, D64, D128, D144, D256, 8, 16, 32, 64, 128, D384, D608 144, 256, 384, 608
kbit/s
D384
Enhanced CELL-FACH
Interval Type
1~2000
1~2000
kbit/s
512
Enumeration Type
kbit/s
D16
Security Management
Compound Type
00:00:00~23:59:59
None
None
Enumeration Type
TRUE, FALSE
TRUE, FALSE
None
FALSE
Enumeration Type
STTD_not_Supp orted
Enumeration Type
STTD_not_Supp orted
Conversational QoS Class Streaming QoS Class Interactive QoS Class Background QoS Class Interval Type
0~2
0~2
None
None
FP MUX for IP Transmission UDP MUX for IuCS Transmission Interval Type
16~1023
16~1023
byte
352
None
Interval Type
1~50
1~50
None
None
None
Interval Type
1~124,128~189
1~124, 128~189
None
None
Enumeration Type
TRUE, FALSE
TRUE, FALSE
None
FALSE
FALSE, TRUE
FALSE, TRUE
None
FALSE
Enumeration Type
FALSE, TRUE
TRUE, FALSE
None
FALSE
FALSE, TRUE
FALSE, TRUE
None
FALSE
3GPP Specifications Inter RNC Cell Update Inter RNC URA Enumeration Update Type BSC/RNC Clock Enumeration Type
NO, YES
NO, YES
None
NO
None
NO
3GPP Specifications
Enumeration Type
None
FALSE, TRUE
FALSE, TRUE
None
FALSE
FALSE, TRUE
FALSE, TRUE
None
FALSE
FALSE, TRUE
FALSE, TRUE
None
FALSE
Faulty Management
Enumeration Type
CLOSE(CLOSE), OPEN(OPEN)
CLOSE, OPEN
None
CLOSE
None
Enumeration Type
ON, OFF
ON, OFF
None
None
SUN(Sunday), MON(Monday), TUE(Tuesday), WED(Wednesday), THU(Thursday), FRI(Friday), SUN, MON, TUE, SAT(Saturday) WED, THU, FRI, SAT None
None
CLOSE, OPEN
None
None
None
ON, OFF
None
None
License Management
Enumeration Type
ON(ON), OFF(OFF)
ON, OFF
None
None
None
Enumeration Type
BFD_OFF(OFF), BFD_ON(ON)
BFD_OFF, BFD_ON
None
None
3GPP Specifications
Enumeration Type
OFF, ON
OFF, ON
None
None
Enumeration Type
None
YES
Interval Type
1~254
1~254
None
10
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
OFF
None
Interval Type
0~4294967295
0~4294967295
None
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
OFF
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
OFF
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
OFF
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
OFF
None
Enumeration Type
OFF(OFF), ON(ON)
OFF, ON
None
OFF
None
Interval Type
0~4294967295
0~4294967295
None
None
Interval Type
0~4294967295
0~4294967295
None
None
Interval Type
0~4294967295
0~4294967295
None
Security Management
Enumeration Type
OFF(Off), ON(On)
OFF, ON
None
ON
Configuration Management
Enumeration Type
FIRST(First), SECOND(Second), THIRD(Third), FIRST, SECOND, FOURTH(Fourth), THIRD, FOURTH, LAST(Last) LAST
None
None
Flow Control
Interval Type
1~500
1~500
None
60
Configuration Management
String Type
None
1~250 characters
None
None
Configuration Management
String Type
None
1~250 characters
None
MBSC
Flow Control
Interval Type
1~500
1~500
None
60
3GPP Specifications
Interval Type
1~255
1~255
min
10
Configuration Management
String Type
None
1~250 characters
None
None
Configuration Management
String Type
None
1~250 characters
None
BSC
Flow Control
Interval Type
1~500
1~500
None
100
Configuration Management
String Type
None
1~250 characters
None
None
Flow Control
Interval Type
1~500
1~500
None
180
Interval Type
30000~60000
30000~60000
ms
60000
Interval Type
800~1500
800~1500
ms
1500
Interval Type
800~1500
800~1500
ms
1500
Interval Type
2000~3000
2000~3000
ms
3000
Interval Type
800~1500
800~1500
ms
1500
Interval Type
800~1200
800~1200
ms
1200
Interval Type
180000~360000
180000~360000
ms
360000
Interval Type
180000~360000
180000~360000
ms
360000
Interval Type
1400~2000
1400~2000
ms
2000
3GPP Specifications
Enumeration Type
D100, D200, D400, D600, D800, D1000, D1200, D1400, D1600, D1800, D2000, D3000, D4000, D6000, D8000
D100, D200, D400, D600, D800, D1000, D1200, D1400, D1600, D1800, D2000, D3000, D4000, D6000, D8000 ms
D2000
3GPP Specifications
Enumeration Type
D100, D200, D400, D600, D800, D1000, D1200, D1400, D1600, D1800, D2000, D3000, D4000, D6000, D8000
D100, D200, D400, D600, D800, D1000, D1200, D1400, D1600, D1800, D2000, D3000, D4000, D6000, D8000 ms
D2000
3GPP Specifications
Enumeration Type
D100, D200, D400, D100, D200, D400, D1000, D2000 D1000, D2000
ms
D2000
3GPP Specifications
Enumeration Type
INFINITY, D5, D10, INFINITY, D5, D10, D30, D60, D120, D30, D60, D120, D360, D720 D360, D720
None
D30
3GPP Specifications
Enumeration Type
D5, D10, D15, D20, D5, D10, D15, D20, D30, D40, D50 D30, D40, D50
D30
3GPP Specifications
Enumeration Type
ms
D40
3GPP Specifications
Interval Type
1~8
1~8
3GPP Specifications
Interval Type
1~15
1~15
3GPP Specifications
Interval Type
0~15
0~15
3GPP Specifications
Enumeration Type
D0, D2, D4, D6, D8, D0, D2, D4, D6, D8, D12, D16, D20 D12, D16, D20
D0
3GPP Specifications
Enumeration Type
D0, D10, D30, D60, D0, D10, D30, D60, D180, D600, D180, D600, D1200, D1200, D1800 D1800
D0
3GPP Specifications
Enumeration Type
D0, D10, D20, D30, D40, D50, D0, D10, D20, D30, INFINITY D40, D50, INFINITY
D30
3GPP Specifications
Interval Type
0~255
0~1530 step:6
min
10
3GPP Specifications
Enumeration Type
D0, D100, D200, D300, D400, D500, D600, D700, D800, D900, D1000, D1200, D1500, D2000
D0, D100, D200, D300, D400, D500, D600, D700, D800, D900, D1000, D1200, D1500, D2000 ms
D600
Interval Type
800~1200
800~1200
ms
1200
Interval Type
800~1200
800~1200
ms
1200
Interval Type
800~1200
800~1200
ms
1200
Interval Type
800~1200
800~1200
ms
1200
Interval Type
0~999999
0~999999
None
None
Enhanced CELL-FACH
Interval Type
1~1000
per cent
10
-24~0
-24~0
dB
-12
-115~-25
-115~-25
dBm
-92
-24~0
-24~0
dB
-12
-115~-25
-115~-25
dBm
-92
-24~0
-24~0
dB
-12
-115~-25
-115~-25
dBm
-92
Interval Type
0~63
lower than -110, 110~-48(Actual value meets the condition: Actual Value = GUI Value - 111) dBm
16
Interval Type
0~63
lower than -110, 110~-48(Actual value meets the condition: Actual Value = GUI Value - 111) dBm
16
Interval Type
0~63
lower than -110, 110~-48(Actual value meets the condition: Actual Value = GUI Value - 111) dBm
16
None
Interval Type
1~12
1~12
None
None
Enumeration Type
None
None
Interval Type
0~512
0~512
None
None
Interval Type
0~1
0~1
None
None
Interval Type
0~512
0~512
None
Interval Type
0~512
0~512
None
Interval Type
1 None
Interval Type
0~512
0~512
None
Interval Type
0~512
0~512
None
Enumeration Type
D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24, D25, D26, D27, D28, D29, D30, D31, D32, D33, D34, D35, D36, D37, D38, D39, D40, D41, D42, D43, D44, D45, D46, D47, D48, D49, D50, D51, D52, D53, D54, D55, D56, D57, D58, D59, D60, D61, D62, D63, D64, D65, D66, D67, D68, D69, D70, D71, D72, D73, D74, D75, D76, D77, D78, D79, D80, D81, D82, D83, D84, D85, D86, D87, D88, D89, D90
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90 None
None
Enumeration Type
D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24, D25, D26, D27, D28, D29, D30, D31, D32, D33, D34, D35, D36, D37, D38, D39, D40, D41, D42, D43, D44, D45, D46, D47, D48, D49, D50, D51, D52, D53, D54, D55, D56, D57, D58, D59, D60, D61, D62, D63, D64, D65, D66, D67, D68, D69, D70, D71, D72, D73, D74, D75, D76, D77, D78, D79, D80, D81, D82, D83, D84, D85, D86, D87, D88, D89, D90
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90 None
None
Enumeration Type
D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24, D25, D26, D27, D28, D29, D30, D31, D32, D33, D34, D35, D36, D37, D38, D39, D40, D41, D42, D43, D44, D45, D46, D47, D48, D49, D50, D51, D52, D53, D54, D55, D56, D57, D58, D59, D60, D61, D62, D63, D64, D65, D66, D67, D68, D69, D70, D71, D72, D73, D74, D75, D76, D77, D78, D79, D80, D81, D82, D83, D84, D85, D86, D87, D88, D89, D90
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90 None
None
Enumeration Type
D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24, D25, D26, D27, D28, D29, D30, D31, D32, D33, D34, D35, D36, D37, D38, D39, D40, D41, D42, D43, D44, D45, D46, D47, D48, D49, D50, D51, D52, D53, D54, D55, D56, D57, D58, D59, D60, D61, D62, D63, D64, D65, D66, D67, D68, D69, D70, D71, D72, D73, D74, D75, D76, D77, D78, D79, D80, D81, D82, D83, D84, D85, D86, D87, D88, D89, D90
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90 None
None
Interval Type
1~254
1~254
None
170
Physical Channel Management Intra Node B Softer Handover Inter RNC Soft Handover
Enumeration Type
CHIP0, CHIP256, CHIP512, CHIP768, CHIP1024, CHIP1280, CHIP1536, CHIP1792, CHIP2048, CHIP2304
CHIP0, CHIP256, CHIP512, CHIP768, CHIP1024, CHIP1280, CHIP1536, CHIP1792, CHIP2048, CHIP2304 chip
None
Interval Type
0~65535
0~65535
None
None
Interval Type
1~15
1~15
None
10
Enumeration Type
NOT_USED, D30(30 seconds), D60(60 seconds), D120(120 seconds), D180(180 seconds), NOT_USED, 30, 60, D240(240 seconds) 120, 180, 240
D60
Enumeration Type
NOT_USED, D10(10 seconds), D20(20 seconds), D30(30 seconds), D40(40 seconds), D50(50 seconds), D60(60 seconds), D70(70 seconds)
D20
Enumeration Type
NotUsed, D10(10 seconds), D20(20 seconds), D30(30 seconds), D40(40 seconds), D50(50 seconds), D60(60 seconds), D70(70 seconds)
NotUsed
Enumeration Type
NotUsed, D30(30 seconds), D60(60 seconds), D120(120 seconds), D180(180 seconds), NotUsed, 30, 60, 120, D240(240 seconds) 180, 240 s
NotUsed
Interval Type
0~255
0~255
60
OPEN 45 0
HCS (Hierarchical Cell Structure) Intra RNC Cell Update Inter RNC Cell Update
Enumeration Type
D3
HCS (Hierarchical Cell Structure) Intra RNC Cell Update Inter RNC Cell Update
Enumeration Type
D2~0 D3~1 D4~2 D6~3 D8~4 D10~5 2, 3, 4, 6, 8, 10, 12, D12~6 INFINITY INFINITY
dB
D2
AMR/WB-AMR Speech Rates Control Inter Frequency Hard Handover Based on DL QoS Inter-RAT Handover Based on DL QoS Interval Type
1~6000
10~60000, step: 10
ms
480
Dynamic Channel Configuration Control (DCCC) Inter Frequency Hard Handover Based on DL QoS Inter-RAT Handover Based on DL QoS Interval Type
1~6000
10~60000, step: 10
ms
480
1~6000
10~60000, step: 10
ms
480
Load Measurement
Interval Type
1~6000
10~60000, step:10
ms
100
Load Measurement
Interval Type
1~6000
10~60000, step:10
ms
20
Load Measurement
Interval Type
1~6000
10~60000, step:10
ms
100
Load Measurement
Interval Type
1~6000
10~60000, step:10
ms
100
Load Measurement
Interval Type
1~6000
10~60000, step:10
ms
100
Load Measurement
Interval Type
1~6000
10~60000, step:10
ms
100
Load Measurement
Interval Type
1~6000
10~60000, step:10
ms
100
Load Measurement
Interval Type
1~6000
10~60000, step:10
ms
20
1~6000
10~60000, step: 10
ms
480
Interval Type
0~511
0~511
180
Enumeration Type
EXISTS, NOT_EXISTS
EXISTS, NOT_EXISTS
None
None
Enumeration Type
D1, D2, D3
1, 2, 3
None
None
Enumeration Type
D1, D2
1~2
None
None
None None
None None
None None
None
IP Address Type
None
None
None
IP Address Type
None
None
None
Interval Type
0~5,8~27
0~5, 8~27
None
None
None
Interval Type
0~11
0~11
None
None
1~512
1~512
None
None
AMR/WB-AMR Speech Rates Control Dynamic Channel Configuration Control (DCCC) Inter Frequency Hard Handover Based on DL QoS Inter-RAT Handover Based on DL QoS Interval Type
0~56
dB
None
AMR/WB-AMR Speech Rates Control Dynamic Channel Configuration Control (DCCC) Inter Frequency Hard Handover Based on DL QoS Inter-RAT Handover Based on DL QoS Interval Type
0~56
dB
None
Interval Type
1~15
1~15
None
None
Enumeration Type
None
Medium
Enumeration Type
None
Low
Enumeration Type
None
Low
Enumeration Type
None
Low
Enumeration Type
None
Low
Enumeration Type
None
Low
Enumeration Type
None
High
Enumeration Type
None
High
Enumeration Type
None
High
Enumeration Type
None
High
Enumeration Type
None
High
Enumeration Type
None
Medium
Enumeration Type
None
Medium
Enumeration Type
None
Medium
Enumeration Type
None
Medium
Enumeration Type
None
None
None
Enumeration Type
None
None
None None
NOLIMIT None
Ethernet OAM
Interval Type
200~10000
200~10000
ms
2000
Ethernet OAM
Interval Type
1~65535
1~65535
ms
3000
Ethernet OAM
Interval Type
1~3
1~3
Ethernet OAM
Interval Type
1~10
1~10
Admission Control
Interval Type
1~3600
1~3600
None
Interval Type
1~64
1~64, step:0.05
ms
10
None
Interval Type
1~1024
1~1024
None
0~1000
0~1000
ms
Flow Control
Interval Type
0~500000
0~500000
ms
5000
Inter Frequency Hard Handover Based on Coverage Inter Frequency Hard Handover Based on DL Enumeration QoS Type
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D0
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D320
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D1280
Interval Type
0~64000,65535
0~64000, 65535
ms
0~64000
0~64000
ms
Interval Type
0~64000
0~64000
ms
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000, D10000, D15000, D20000, D25000, D30000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000, 10000, 15000, 20000, 25000, 30000 ms
D240
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000, D10000, D15000, D20000, D25000, D30000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000, 10000, 15000, 20000, 25000, 30000 ms
D2560
Flow Control
Interval Type
1~100
1~100
None
Flow Control
Interval Type
1~100
1~100
None
14
Security Management
Interval Type
7~365
7~365
None
None
Compound Type
hour, min
00:00~23:59
None
None
None
Compound Type
hour, min
00:00~23:59
None
None
None
Compound Type
hour, min
00:00~23:59
None
None
None
Compound Type
hour, min
00:00~23:59
None
None
None
Compound Type
hour, min
00:00~23:59
None
None
None
Compound Type
hour, min
00:00~23:59
None
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type RAN Sharing Phase 2 Traffic Priority Mapping onto Transmission Resources RAN Sharing Phase 2 Traffic Priority Mapping onto Transmission Resources RAN Sharing Phase 2 Traffic Priority Mapping onto Transmission Resources
14~163
14~163
None
None
Interval Type
0~163
0~163
None
None
Interval Type
0~163
0~163
None
None
Interval Type
0~163
0~163
None
None
Faulty Management
Interval Type
0~100
0~100
per cent
Faulty Management
Interval Type
0~100
0~100
per cent
Interval Type
8000~12000
8000~12000
ms
12000
Interval Type
Configuration Management
Enumeration Type
30000~90000 30000~90000 ABLMSGTYPEPAR AS, ACALGOPARAS, ADMCTLPARAS, AICH, AMRCSQICOUNTP ARAS, APN, BCH, CBSADDR, CBSCELLSAC, CELLACCESSCLA SSBARREDLIST, CELLACCESSRES TRICT, CELLACCESSRES TRICTBARREDPA RA, CELLACTTIMEOF FSET, CELLAMRCPARAS , CELLAMRCWBPA RAS, CELLBASICINFO, CELLBCCHMODTI ME, CELLBINDINFO, CELLCACLOADBA LANCINGPARA, CELLCACPARA, CELLCBSDRXINF O, CELLCLOSEDLOO PTIMEADJUSTMO DE, CELLCMBCH, CELLCMCFPARAS 0~276
ms
60000
None
None
ATM Transmission Introduction Package IP Transmission Introduction on Iur Interface IP-Based 2G/3G CoTransmission on MBSC Side MOCN Introduction Package RNC Node Enumeration Redundancy Type
ATM_TRANS, IP_TRANS
ATM_TRANS, IP_TRANS
None
None
ATM_TRANS, IP_TRANS
ATM_TRANS, IP_TRANS
None
None
ATM_TRANS(ATM circuit transmission), IP_TRANS(IP transmission), ATMANDIP_TRAN S(ATM and IP transmission), HYBRID_IP_TRAN S(Hybrid IP transmission)
Configuration Management
Interval Type
-120~-1,1~120
-120~-1, 1~120
min
None
Interval Type
0~2559
0~2559
ms
10
Interval Type
0~2559
0~2559
ms
None
Interval Type
0~1279
0~1279
ms
35
Interval Type
0~1279
0~1279
ms
None
Interval Type
0~5
0~5
None
None
Enumeration Type
NORMAL, FORMAT
None
None
HCS (Hierarchical Cell Structure) Intra RNC Cell Update Inter RNC Cell Update
Enumeration Type
D0, D10, D20, D30, 0, 10, 20, 30, 40, 50, D40, D50, D60 60
D0
Flow Control
Interval Type
30~100
30~100
per cent
60
Flow Control
Interval Type
30~100
30~100
per cent
60
Flow Control
Interval Type
30~100
30~100
per cent
50
Flow Control
Interval Type
30~100
30~100
per cent
50
Flow Control
Enumeration Type
ON, OFF
ON, OFF
None
ON
Conversational QoS Class Streaming QoS Class Interactive QoS Class Background Enumeration QoS Class Type
None
Enumeration Type
INTERACTIVE, BACKGROUND
INTERACTIVE, BACKGROUND
None
None
Enumeration Type
None
None
Enumeration Type
None
Enhanced CELL-FACH
Enumeration Type
CONVERSATIONA L, STREAMING, INTERACTIVE, BACKGROUND CONVERSATIONA L, STREAMING, INTERACTIVE, BACKGROUND, NBAMR, WBAMR
CONVERSATIONAL, STREAMING, INTERACTIVE, BACKGROUND None CONVERSATIONAL, STREAMING, INTERACTIVE, BACKGROUND, NBAMR, WBAMR None
None
Enumeration Type
None
Enumeration Type
INTERACTIVE, BACKGROUND
INTERACTIVE, BACKGROUND
None
None
Service Steering and Load Sharing in RRC Connection Enumeration Setup Type Service Steering and Load Sharing in RRC Connection Enumeration Setup Type
None
None
None
None
M3UA_LOADSH ARE_MOD
Overload Control
Interval Type
0~10
0~10
None
Interval Type
0~65535
0~65535
ms
10
Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Hybrid Iub IP Transmission ATM/IP Dual Stack Node B
Enumeration Type
ATM(ATM), IP(IP), ATM_IP(ATM and IP), HYBRID_IP(HYBRI ATM, IP, ATM_IP, D IP) HYBRID_IP
None
None
IP Transmission Introduction on Iub Interface Overbooking on Enumeration IP Transmission Type RAN Sharing Phase 2 Traffic Priority Mapping onto Transmission Resources
IP(IP), HYBRID_IP(HYBRI D IP) IP, HYBRID_IP ATM(ATM), IP(IP), ATM_IP(ATM and IP), HYBRID_IP(HYBRI ATM, IP, ATM_IP, D IP) HYBRID_IP
None
None
Enumeration Type
None
None
Hybrid Iub IP Transmission ATM/IP Dual Stack Node B ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Traffic Priority Mapping onto Transmission Enumeration Resources Type ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) 2G/3G CoTransmission Resources Management Enumeration on MBSC Type
ATM(ATM), IP(IP), ATM_IP(ATM and IP), HYBRID_IP(HYBRI ATM, IP, ATM_IP, D IP) HYBRID_IP
None
None
ATM(ATM), IP(IP)
ATM, IP
None
None
3GPP Specifications
Interval Type
0~255
0~255
None
3GPP Specifications
Interval Type
1~32
1~32
None
None
3GPP Specifications
Interval Type
1~32
1~32
None
Interval Type
1~32
1~32
None
Enumeration Type
None
Enumeration Type
None
Conversational QoS Class Streaming QoS Class Interactive QoS Class Background Enumeration QoS Class Type
None
Interval Type
0~120
0~120
10
Intra RNC Cell Update Inter RNC Cell Update HCS (Hierarchical Cell Structure) Multi Frequency Band Networking Management Interval Type
0~31
0~31
Interval Type
0~31,255
255
Interval Type
0~31,255
{0~31}, {255}
255
None
Interval Type
100~1999
100~1999
None
None
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
None
Enumeration Type
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000 D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D320
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
None
Enumeration Type
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D640
Enumeration Type
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D640
Enumeration Type
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D640
Intra Node B Softer Handover Inter RNC Soft Handover Inter Frequency Hard Handover Based on Enumeration Coverage Type
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D640
Enumeration Type
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D640
Enumeration Type
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D640
Enumeration Type
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D320
Enumeration Type
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D1280
Enumeration Type
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D0
Inter-RAT Handover Based on Service Inter-RAT Handover Enumeration Based on Load Type
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D640
Enumeration Type
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D240
Enumeration Type
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000 0~7(FG2a), 0~1(GOUa), 0~11(FG2c), 0~3(GOUc)
ms
D240
Link aggregation
Interval Type
0~11
None
None
Link aggregation
Interval Type
0~5,8~27
0~5, 8~27
None
None
Link aggregation
Interval Type
0~11
None
None
Interval Type
0~255
50
Overbooking on ATM Transmission ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~199
0~199
None
0~199
0~199
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) 2G/3G CoTransmission Resources Management on MBSC Interval Type Fractional ATM Function on Iub Interface Interval Type IMA for E1T1 or Channelized STM-1/OC-3 on Iub Interface Interval Type Overbooking on ATM Transmission Interval Type
10~199
10~199
None
None
0~199
0~199
None
0~199
0~199
None
0~199
0~199
None
None
Interval Type
0~199
0~199
None
None
Interval Type
0~199
0~199
None
None
Interval Type
0~199
0~199
None
Overbooking on IP Transmission Interval Type Intra Node B Softer Handover Inter RNC Soft Handover
0~199
0~199
None
Interval Type
0~4095
0~4095
None
None
Interval Type
0~11
0~11
None
None
Interval Type
0~11
0~11
None
None
Ethernet OAM
Interval Type
None
Enumeration Type
0~11 TS1(Time_slot_1), TS2(Time_slot_2), TS3(Time_slot_3), TS4(Time_slot_4), TS5(Time_slot_5), TS6(Time_slot_6), TS7(Time_slot_7), TS8(Time_slot_8), TS9(Time_slot_9), TS10(Time_slot_10 ), TS11(Time_slot_11 ), TS12(Time_slot_12 ), TS13(Time_slot_13 ), TS14(Time_slot_14 ), TS15(Time_slot_15 ), TS16(Time_slot_16 ), TS17(Time_slot_17 ), TS18(Time_slot_18 ), TS19(Time_slot_19 ), TS20(Time_slot_20 ), TS21(Time_slot_21 ), TS22(Time_slot_22 ),
0~11
None
None
TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
None
None
OFF(OFF), ON(ON)
OFF, ON
None
None
Fractional ATM Function on Iub Interface ATM Switching Based Hub Node B Bit Field Type
TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31 TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31 TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31 TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31 TS1, TS2, TS3, TS4, TS5, TS6, TS7, TS8, TS9, TS10, TS11, TS12, TS13, TS14, TS15, TS16, TS17, TS18, TS19, TS20, TS21, TS22, TS23, TS24, TS25, TS26, TS27, TS28, TS29, TS30, TS31
None
None
None
None
None
None
None
None
None
Interval Type
0~65535
0~65535
None
None
None
String Type
None
1~50 characters
None
None
Interval Type
0~511
0~511
240
None
String Type
None
None
None
Interval Type
1~120
1~120
30
None
Enumeration Type
OFF, ON
OFF, ON
None
OFF
None
Interval Type
1~255
1~255
None
64
None
Interval Type
1~128
1~128
64
IP Transmission Introduction on Iub Interface Hybrid Iub IP Transmission ATM/IP Dual Stack Node B Interval Type
1~3000000
1~3000000
kbit/s
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type Overbooking on ATM Transmission Interval Type
0~4000000
0~4000000
kbit/s
None
512~149000
512~149000
kbit/s
None
Enumeration Type
TRUE, FALSE
TRUE, FALSE
None
None
Enumeration Type
TRUE, FALSE
TRUE, FALSE
None
None
None
Interval Type
200~10000
200~10000
ms
500
None
Interval Type
10~60
10~60
ms
30
ATM Transmission Introduction Package Permanent AAL5 Connections for Control Plane Traffic Interval Type
100~1999
100~1999
None
None
Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Call Admission Based on Used AAL2 Path Bandwidth CBR, rt-VBR, nrt-VBR, UBR ATM QoS Classes Overbooking on ATM Transmission ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type Permanent AAL5 Connections for Control Plane Traffic ATM Transmission Introduction Package Interval Type ATM Transmission Introduction Package
100~1999
100~1999
None
None
100~1999
100~1999
None
None
Interval Type
100~1999
100~1999
None
None
None
Enumeration Type
None
None
Enumeration Type
None
None
Interval Type
0~16383
0~16383
None
None
3GPP Specifications
Interval Type
0~16383
0~16383
None
None
Interval Type
0~16383
0~16383
None
None
3GPP Specifications
Interval Type
0~16383
0~16383
None
None
Enumeration Type
TRUE, FALSE
TRUE, FALSE
None
None
3GPP Specifications
Enumeration Type
TRUE, FALSE
TRUE, FALSE
None
None
Interval Type
2000~60000
2000~60000
ms
5000
FP MUX for IP Transmission UDP MUX for IuCS Enumeration Transmission Type
NORTPCOMP, RTPCOMP
NORTPCOMP, RTPCOMP
None
None
FP MUX for IP Transmission UDP MUX for IuCS Enumeration Transmission Type
NORTPCOMP, RTPCOMP REFERENCE_TIM E_FOR_GPS, REFERENCE_LOC ATION_FOR_GPS, DGPS_CORRECT, GPS_NAVGMODE L, GPS_IONOSPHER IC_MODEL, GPS_UTC_MODEL , GPS_ALMANAC, GPS_ACQ_ASSIS T, GPS_REALTIME_I NTEGRITY
NORTPCOMP, RTPCOMP
None
None
REFERENCE_TIME_ FOR_GPS, REFERENCE_LOCA TION_FOR_GPS, DGPS_CORRECT, GPS_NAVGMODEL, GPS_IONOSPHERIC _MODEL, GPS_UTC_MODEL, GPS_ALMANAC, GPS_ACQ_ASSIST, GPS_REALTIME_INT EGRITY None
None
REFERENCE_TIM E_FOR_GPS, REFERENCE_LOC ATION_FOR_GPS, DGPS_CORRECT, GPS_NAVGMODE L, GPS_IONOSPHER IC_MODEL, GPS_UTC_MODEL , GPS_ALMANAC, GPS_ACQ_ASSIS T, GPS_REALTIME_I NTEGRITY
REFERENCE_TIME_ FOR_GPS, REFERENCE_LOCA TION_FOR_GPS, DGPS_CORRECT, GPS_NAVGMODEL, GPS_IONOSPHERIC _MODEL, GPS_UTC_MODEL, GPS_ALMANAC, GPS_ACQ_ASSIST, GPS_REALTIME_INT EGRITY None
None
3GPP Specifications
Interval Type
1~10000
1~10000
ms
5000
Encryption
Interval Type
1~10000
1~10000
ms
5000
Security Management
Enumeration Type
Administrators(Adm inistrator), Operators(Operator ), Users(User), Administrators, Guests(Guest), Operators, Users, Customs(Custom) Guests, Customs
None
Guests
Interval Type
300~1000
300~1000
ms
1000
String Type
None
0~9 Characters
None
90
Admission Control
Interval Type
0~100
None
50
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D320
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D320
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D320
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D320
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D240
Admission Control
Interval Type
0~100
None
10
Load Measurement
Enumeration Type
D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19
D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19
None
D6
Enumeration Type
D8, D16
8, 16
kbit/s
D8
Enumeration Type
D8, D16
8, 16
kbit/s
D8
D8, D16, D32, D64, D128, D144, D256, 8, 16, 32, 64, 128, D384 144, 256, 384
kbit/s
D64
HSUPA Introduction Package Interactive and Background Traffic Class on Enumeration HSUPA Type
D8, D16, D32, D64, D128, D144, D256, D384, D608, D1440, D2048, D2880, D5740
8, 16, 32, 64, 128, 144, 256, 384, 608, 1440, 2048, 2880, 5740
kbit/s
D608
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D640
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D1280
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D2560
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D1280
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D240
Load Measurement
Interval Type
1~32
1~32
None
Admission Control
Interval Type
0~100
0~1, step:0.01
per cent
Admission Control
Interval Type
0~100
0~1, step:0.01
per cent
83
Inter Frequency Hard Handover Based on Coverage Inter-RAT Handover Based on Coverage Bit Field Type
SF/2
Load Reshuffling
Interval Type
1~10
1~10
None
Load Reshuffling
Interval Type
1~10
1~10
None
Load Reshuffling
Interval Type
1~10
1~10
None
Load Reshuffling
Interval Type
1~10
1~10
None
D8, D16, D32, D64, D128, D144, D256, 8, 16, 32, 64, 128, D384 144, 256, 384
kbit/s
D64
Conversational QoS Class Streaming QoS Class Interactive QoS Class Background Enumeration QoS Class Type
None
None
D8, D16, D32, D64, D128, D144, D256, 8, 16, 32, 64, 128, D384 144, 256, 384
kbit/s
D64
Enumeration Type
kbit/s
D64
Admission Control
Enumeration Type
None
SF16
Admission Control
Interval Type
0~100
0~1, step:0.01
per cent
Enumeration Type
None
SCHEDULED
Admission Control
Interval Type
0~100
None
10
Load Reshuffling
Interval Type
0~400000
0~400000
bit/s
200000
Load Reshuffling
Interval Type
0~100
0~1, step:0.01
per cent
20
Load Reshuffling
Interval Type
1~10
1~10
None
Load Measurement
Interval Type
1~32
1~32
None
Load Reshuffling
Interval Type
1~10
1~10
None
Load Reshuffling
Interval Type
1~10
1~10
None
Load Reshuffling
Enumeration Type
None
SF8
Load Reshuffling
Enumeration Type
None
SF8
Load Reshuffling
Enumeration Type
NoAct(no action), InterFreqLDHO(inte r-freq load handover), BERateRed(BE traff rate reduction), QoSRenego(uncont rolled real-time traff Qos re-negotiation), CSInterRatShouldB eLDHO(CS domain inter-rat should be load handover), PSInterRatShouldB eLDHO(PS domain inter-rat should be load handover), AMRRateRed(AMR traff rate reduction), CSInterRatShouldN otLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldN otLDHO(PS domain inter-rat should not be load handover)
NoAct, InterFreqLDHO, BERateRed, QoSRenego, CSInterRatShouldBeL DHO, PSInterRatShouldBeL DHO, AMRRateRed, CSInterRatShouldNot LDHO, PSInterRatShouldNot LDHO None
NoAct
Load Reshuffling
Enumeration Type
NoAct(no action), InterFreqLDHO(inte r-freq load handover), BERateRed(BE traff rate reduction), QoSRenego(uncont rolled real-time traff Qos re-negotiation), CSInterRatShouldB eLDHO(CS domain inter-rat should be load handover), PSInterRatShouldB eLDHO(PS domain inter-rat should be load handover), AMRRateRed(AMR traff rate reduction), CSInterRatShouldN otLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldN otLDHO(PS domain inter-rat should not be load handover) NoAct(no action), BERateRed(BE traff rate reduction), QoSRenego(uncont rolled real-time traff Qos re-negotiation), CSInterRatShouldB eLDHO(CS domain inter-rat should be load handover), PSInterRatShouldB eLDHO(PS domain inter-rat should be load handover), CSInterRatShouldN otLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldN otLDHO(PS domain inter-rat should not be load handover)
NoAct, InterFreqLDHO, BERateRed, QoSRenego, CSInterRatShouldBeL DHO, PSInterRatShouldBeL DHO, AMRRateRed, CSInterRatShouldNot LDHO, PSInterRatShouldNot LDHO None
NoAct
Load Reshuffling
Enumeration Type
NoAct, BERateRed, QoSRenego, CSInterRatShouldBeL DHO, PSInterRatShouldBeL DHO, SInterRatShouldNotL DHO, PSInterRatShouldNot LDHO None
NoAct
Load Reshuffling
Enumeration Type
NoAct(no action), InterFreqLDHO(inte r-freq load handover), BERateRed(BE traff rate reduction), QoSRenego(uncont rolled real-time traff Qos re-negotiation), CSInterRatShouldB eLDHO(CS domain inter-rat should be load handover), PSInterRatShouldB eLDHO(PS domain inter-rat should be load handover), AMRRateRed(AMR traff rate reduction), CSInterRatShouldN otLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldN otLDHO(PS domain inter-rat should not be load handover)
NoAct, InterFreqLDHO, BERateRed, QoSRenego, CSInterRatShouldBeL DHO, PSInterRatShouldBeL DHO, AMRRateRed, CSInterRatShouldNot LDHO, PSInterRatShouldNot LDHO None
InterFreqLDHO
Load Reshuffling
Enumeration Type
NoAct(no action), BERateRed(BE traff rate reduction), QoSRenego(uncont rolled real-time traff Qos re-negotiation), CSInterRatShouldB eLDHO(CS domain inter-rat should be load handover), PSInterRatShouldB eLDHO(PS domain inter-rat should be load handover), CSInterRatShouldN otLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldN otLDHO(PS domain inter-rat should not be load handover)
NoAct, BERateRed, QoSRenego, CSInterRatShouldBeL DHO, PSInterRatShouldBeL DHO, SInterRatShouldNotL DHO, PSInterRatShouldNot LDHO None
BERateRed
Load Reshuffling
Enumeration Type
NoAct(no action), InterFreqLDHO(inte r-freq load handover), BERateRed(BE traff rate reduction), QoSRenego(uncont rolled real-time traff Qos re-negotiation), CSInterRatShouldB eLDHO(CS domain inter-rat should be load handover), PSInterRatShouldB eLDHO(PS domain inter-rat should be load handover), AMRRateRed(AMR traff rate reduction), CSInterRatShouldN otLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldN otLDHO(PS domain inter-rat should not be load handover) NoAct(no action), BERateRed(BE traff rate reduction), QoSRenego(uncont rolled real-time traff Qos re-negotiation), CSInterRatShouldB eLDHO(CS domain inter-rat should be load handover), PSInterRatShouldB eLDHO(PS domain inter-rat should be load handover), CSInterRatShouldN otLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldN otLDHO(PS domain inter-rat should not be load handover)
NoAct, InterFreqLDHO, BERateRed, QoSRenego, CSInterRatShouldBeL DHO, PSInterRatShouldBeL DHO, AMRRateRed, CSInterRatShouldNot LDHO, PSInterRatShouldNot LDHO None
NoAct
Load Reshuffling
Enumeration Type
NoAct, BERateRed, QoSRenego, CSInterRatShouldBeL DHO, PSInterRatShouldBeL DHO, SInterRatShouldNotL DHO, PSInterRatShouldNot LDHO None
NoAct
Load Reshuffling
Interval Type
1~10
1~10
None
Load Reshuffling
Interval Type
1~10
1~10
None
Load Reshuffling
Interval Type
0~100
0~1, step:0.01
per cent
45
Load Reshuffling
Enumeration Type
NoAct(no action), InterFreqLDHO(inte r-freq load handover), BERateRed(BE traff rate reduction), QoSRenego(uncont rolled real-time traff Qos re-negotiation), CSInterRatShouldB eLDHO(CS domain inter-rat should be load handover), PSInterRatShouldB eLDHO(PS domain inter-rat should be load handover), AMRRateRed(AMR traff rate reduction), CSInterRatShouldN otLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldN otLDHO(PS domain inter-rat should not be load handover) NoAct(no action), BERateRed(BE traff rate reduction), QoSRenego(uncont rolled real-time traff Qos re-negotiation), CSInterRatShouldB eLDHO(CS domain inter-rat should be load handover), PSInterRatShouldB eLDHO(PS domain inter-rat should be load handover), CSInterRatShouldN otLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldN otLDHO(PS domain inter-rat should not be load handover)
NoAct, InterFreqLDHO, BERateRed, QoSRenego, CSInterRatShouldBeL DHO, PSInterRatShouldBeL DHO, AMRRateRed, CSInterRatShouldNot LDHO, PSInterRatShouldNot LDHO None
BERateRed
Load Reshuffling
Enumeration Type
NoAct, BERateRed, QoSRenego, CSInterRatShouldBeL DHO, PSInterRatShouldBeL DHO, SInterRatShouldNotL DHO, PSInterRatShouldNot LDHO None
NoAct
Load Reshuffling
Enumeration Type
NoAct(no action), InterFreqLDHO(inte r-freq load handover), BERateRed(BE traff rate reduction), QoSRenego(uncont rolled real-time traff Qos re-negotiation), CSInterRatShouldB eLDHO(CS domain inter-rat should be load handover), PSInterRatShouldB eLDHO(PS domain inter-rat should be load handover), AMRRateRed(AMR traff rate reduction), CSInterRatShouldN otLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldN otLDHO(PS domain inter-rat should not be load handover)
NoAct, InterFreqLDHO, BERateRed, QoSRenego, CSInterRatShouldBeL DHO, PSInterRatShouldBeL DHO, AMRRateRed, CSInterRatShouldNot LDHO, PSInterRatShouldNot LDHO None
NoAct
Load Reshuffling
Enumeration Type
NoAct(no action), InterFreqLDHO(inte r-freq load handover), BERateRed(BE traff rate reduction), QoSRenego(uncont rolled real-time traff Qos re-negotiation), CSInterRatShouldB eLDHO(CS domain inter-rat should be load handover), PSInterRatShouldB eLDHO(PS domain inter-rat should be load handover), AMRRateRed(AMR traff rate reduction), CSInterRatShouldN otLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldN otLDHO(PS domain inter-rat should not be load handover) NoAct(no action), BERateRed(BE traff rate reduction), QoSRenego(uncont rolled real-time traff Qos re-negotiation), CSInterRatShouldB eLDHO(CS domain inter-rat should be load handover), PSInterRatShouldB eLDHO(PS domain inter-rat should be load handover), CSInterRatShouldN otLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldN otLDHO(PS domain inter-rat should not be load handover)
NoAct, InterFreqLDHO, BERateRed, QoSRenego, CSInterRatShouldBeL DHO, PSInterRatShouldBeL DHO, AMRRateRed, CSInterRatShouldNot LDHO, PSInterRatShouldNot LDHO None
NoAct
Load Reshuffling
Enumeration Type
NoAct, BERateRed, QoSRenego, CSInterRatShouldBeL DHO, PSInterRatShouldBeL DHO, SInterRatShouldNotL DHO, PSInterRatShouldNot LDHO None
NoAct
Load Reshuffling
Enumeration Type
NoAct(no action), InterFreqLDHO(inte r-freq load handover), BERateRed(BE traff rate reduction), QoSRenego(uncont rolled real-time traff Qos re-negotiation), CSInterRatShouldB eLDHO(CS domain inter-rat should be load handover), PSInterRatShouldB eLDHO(PS domain inter-rat should be load handover), AMRRateRed(AMR traff rate reduction), CSInterRatShouldN otLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldN otLDHO(PS domain inter-rat should not be load handover) NoAct(no action), BERateRed(BE traff rate reduction), QoSRenego(uncont rolled real-time traff Qos re-negotiation), CSInterRatShouldB eLDHO(CS domain inter-rat should be load handover), PSInterRatShouldB eLDHO(PS domain inter-rat should be load handover), CSInterRatShouldN otLDHO(CS domain inter-rat should not be load handover), PSInterRatShouldN otLDHO(PS domain inter-rat should not be load handover)
NoAct, InterFreqLDHO, BERateRed, QoSRenego, CSInterRatShouldBeL DHO, PSInterRatShouldBeL DHO, AMRRateRed, CSInterRatShouldNot LDHO, PSInterRatShouldNot LDHO None
NoAct
Load Reshuffling
Enumeration Type
NoAct, BERateRed, QoSRenego, CSInterRatShouldBeL DHO, PSInterRatShouldBeL DHO, SInterRatShouldNotL DHO, PSInterRatShouldNot LDHO None
NoAct
Load Reshuffling
Interval Type
0~100
0~1, step:0.01
per cent
55
D16, D32, D48, D64, D96, D128, 16, 32, 48, 64, 96, D256, D512, D1024 128, 256, 512, 1024
None
D64
D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, 0, 1, 2, 3, 4, 5, 6, 7, 8, D17, D19 9, 11, 13, 15, 17, 19 None
D19
AUTO_CALC, HAND_APPOINT
0, 1
None
HAND_APPOIN T
D16, D32, D64, D128, D144, D256, 16, 32, 64, 128, 144, D384 256, 384
kbit/s
D128
1~64000
1~64000
ms
1000
1~64000
1~64000
ms
1000
Admission Control
Interval Type
0~100
None
100
Admission Control
Interval Type
0~100
0~1, step:0.01
per cent
75
Admission Control
Interval Type
0~100
0~1, step:0.01
per cent
80
Admission Control
Interval Type
0~100
0~1, step:0.01
per cent
75
Admission Control
Interval Type
0~100
0~1, step:0.01
per cent
60
Load Measurement
Interval Type
1~32
1~32
None
Overload Control
Interval Type
1~10
1~10
None
Overload Control
Interval Type
0~100
0~100
None
Load Measurement
Enumeration Type
D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19
D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D11, D13, D15, D17, D19
None
D3
Overload Control
Interval Type
0~100
0~1, step:0.01
per cent
85
Overload Control
Interval Type
0~10
0~10
None
Load Measurement
Interval Type
1~6000
10~60000, step:10
None
100
Overload Control
Interval Type
0~100
0~1, step:0.01
per cent
95
Load Reshuffling
Interval Type
1~10
1~10
None
Load Reshuffling
Interval Type
1~10
1~10
None
Load Reshuffling
Interval Type
1~10
1~10
None
Load Reshuffling
Interval Type
1~10
1~10
None
AMR/WB-AMR Speech Rates Control Inter-RAT Handover Based on DL Enumeration QoS Type
NO, YES
NO, YES
None
None
AMR/WB-AMR Speech Rates Control Inter-RAT Handover Based on DL Enumeration QoS Type
NO, YES
NO, YES
None
None
AMR/WB-AMR Speech Rates Control Inter-RAT Handover Based on DL Enumeration QoS Type
NO, YES
NO, YES
None
None
Inter Frequency Hard Handover Based on DL QoS Inter-RAT Handover Based on DL QoS Interval Type
0~512
0~512
20
NO, YES
NO, YES
None
None
AMR/WB-AMR Speech Rates Control Inter-RAT Handover Based on DL Enumeration QoS Type
NO, YES
NO, YES
None
None
AMR/WB-AMR Speech Rates Control Inter-RAT Handover Based on DL Enumeration QoS Type
NO, YES
NO, YES
None
None
AMR/WB-AMR Speech Rates Control Inter-RAT Handover Based on DL Enumeration QoS Type
NO, YES
NO, YES
None
None
2_Rates, 3_Rates
2_Rates, 3_Rates
None
3_Rates
2_Rates, 3_Rates
2_Rates, 3_Rates
None
3_Rates
Inter-RAT Handover Based on Coverage Inter Frequency Hard Handover Based on Enumeration Coverage Type
D8, D16, D32, D64, 8, 16, 32, 64, 128, D128, D256 256
None
D64
Admission Control
Interval Type
0~100
None
10
Enumeration Type
None
SCHEDULED
Admission Control
Interval Type
0~100
None
100
D8, D16, D32, D64, D128, D144, D256, 8, 16, 32, 64, 128, D384 144, 256, 384
kbit/s
D256
None
NONSCHEDULED
AMR/WB-AMR Speech Rates Control Dynamic Channel Configuration Control (DCCC) Inter-RAT Handover Based on DL QoS Interval Type
0~82
0~82
dB
None
AMR/WB-AMR Speech Rates Control Dynamic Channel Configuration Control (DCCC) Inter-RAT Handover Based on DL QoS Interval Type
0~82
0~82
dB
None
AMR/WB-AMR Speech Rates Control Dynamic Channel Configuration Control (DCCC) Inter-RAT Handover Based on DL QoS Interval Type
0~82
0~82
dB
None
AMR/WB-AMR Speech Rates Control Dynamic Channel Configuration Control (DCCC) Inter-RAT Handover Based on DL QoS Interval Type
0~82
0~82
dB
None
Admission Control
Interval Type
1~200
1~200
None
80
Interval Type
1~2
1~2
dB
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D640
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D640
D0, D10, D20, D40, D60, D80, D100, D120, D160, D200, D240, D320, D640, D1280, D2560, D5000
0, 10, 20, 40, 60, 80, 100, 120, 160, 200, 240, 320, 640, 1280, 2560, 5000
ms
D240
None
None
0~990
0~990
None
0~3248
0~3248
None
0~1800000
0~1800000
None
0~5905440
0~5905440
None
0~1800000
0~1800000
None
0~5905440
0~5905440 0~31(AEUa), 0~125(E1 of AOUa), 0~167(T1 of AOUa), 0~251(E1 of AOUc), 0~335(T1 of AOUc)
None
0~335
None
None
2~20
2~20
None
Interval Type
0~4599
0~4599
None
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~2047
0~2047
None
None
None
Interval Type
512~1535
512~1535
None
None
None
Interval Type
128~447,512~767
None
3GPP Specifications
Interval Type
0~65535
0~65535
None
None
3GPP Specifications
Interval Type
0~65535
0~65535
None
None
3GPP Specifications
Interval Type
0~65535
0~65535
None
None
3GPP Specifications
Interval Type
0~65535
0~65535
None
None
3GPP Specifications
Interval Type
0~65535
0~65535
None
None
3GPP Specifications
Interval Type
0~65535
0~65535
None
None
3GPP Specifications
Interval Type
0~65535
0~65535
None
None
3GPP Specifications
Interval Type
0~65535
0~65535
None
None
Intra RNC URA Update Inter RNC URA Update Interval Type
0~65535
0~65535
None
None
3GPP Specifications
Interval Type
0~65535
0~65535
None
None
3GPP Specifications
Enumeration Type
D1, D2, D3, D4, D5, D1, D2, D3, D4, D5, D6, D7, D8 D6, D7, D8
None
None
-24~0
-24~0
dB
-12
Interval Type
-24~0
-24~0
dB
-12
-115~-25
-115~-25
dBm
-92
Interval Type
-115~-25
-115~-25
dBm
-97
-24~0
-24~0
dB
-12
Interval Type
-24~0
-24~0
dB
-13
-115~-25
-115~-25
dBm
-92
Interval Type
-115~-25
-115~-25
dBm
-107
Enumeration Type
CPICH_EC/NO, CPICH_RSCP
CPICH_EC/NO, CPICH_RSCP
None
CPICH_RSCP
-24~0
-24~0
dB
-12
Interval Type
-24~0
-24~0
dB
-13
-115~-25
-115~-25
dBm
-92
Interval Type
-115~-25
-115~-25
dBm
-107
Enumeration Type
NOTUSED, USED
NOTUSED, USED
None
None
DHCP HCS (Hierarchical Cell Structure) Intra RNC Cell Update Inter RNC Cell Update Intra RNC Cell Update Inter RNC Cell Update HCS (Hierarchical Cell Structure)
Enumeration Type
Disable(Disable), Enable(Enable)
Disable, Enable
None
Disable
Enumeration Type
USED, NOT_USED
None
NOT_USED
Enumeration Type
None
NOT_USED
Enumeration Type
ALL_USER(All User), HALF(Half), THIRD(THIRD), QUARTER(QUART ALL_USER, HALF, ER) THIRD, QUARTER
None
ALL_USER
Flow Control
Interval Type
5~20
5~20
None
Flow Control
Interval Type
50~100
50~100
None
90
Enumeration Type
None
None
Enumeration Type
None
None
Enhanced CELL-FACH
Enumeration Type
None
None
Enumeration Type
None
None
License Management UBR+ ATM QoS Class CBR, rt-VBR, nrt-VBR, UBR ATM QoS Classes ATM Transmission Introduction Package
String Type
None
1~32 characters
None
None
Enumeration Type
CELL/S, KBIT/S
CELL/S, KBIT/S
None
None
Interval Type
32~65535
32~65535
None
None
IP Transmission Introduction on Iub Interface Hybrid Iub IP Transmission ATM/IP Dual Stack Node B Overbooking on Enumeration IP Transmission Type
None
DISABLE
None
None
DISABLE, ENABLE DISABLE, ENABLE DISABLE(DISABLE ), ENABLE(ENABLE) DISABLE, ENABLE DISABLE(DISABLE ), ENABLE(ENABLE) DISABLE, ENABLE
None
None
None
DISABLE
None
Enumeration Type
None
DISABLE
IP Transmission Introduction on Iub Interface IP Transmission Introduction on Iu Interface IP Transmission Introduction on Iur Interface Interval Type
2~4094
2~4094
None
None
Ethernet OAM
Interval Type
2~4094
2~4094
None
None
None
Interval Type
2~4094
2~4094
None
None
None
Interval Type
2~4094
2~4094
None
None
Interval Type
0~7
0~7
None
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~100
0~100
per cent
70
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF None
None
Interval Type
0~100
0~100
None
100
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Enumeration Transmission) Type
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL
CBR, RT_VBR, NRT_VBR, UBR, BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42, AF43, EF, LQBE, LQAF11, LQAF12, LQAF13, LQAF21, LQAF22, LQAF23, LQAF31, LQAF32, LQAF33, LQAF41, LQAF42, LQAF43, LQEF, NULL None
None
Interval Type
0~100
0~100
None
ATM QoS Introduction on Hub Node B (Overbooking on Hub Node B Transmission) Interval Type
0~100
0~100
per cent
70
Enumeration Type
DCH(UL_DCH,DL_ DCH), HSDPA(UL_DCH,D L_HSDSCH), HSPA(UL_EDCH,D L_HSDSCH) DCH, HSDPA, HSPA None
DCH
EDCH_TTI_10ms, EDCH_TTI_2ms
None
EDCH_TTI_10m s
CLOSE, OPEN
None
OPEN
Faulty Management
String Type
None
1~9 characters
28
Faulty Management
String Type
None
1~9 characters
20
Faulty Management
Enumeration Type
CLOSE(Close), OPEN(Open)
CLOSE, OPEN
None
OPEN
Faulty Management
String Type
None
1~9 characters
57
Faulty Management
String Type
None
1~9 characters
42
None
Interval Type
0~1399
0~1399
None
None
Dynamic AAL2 Connections in Iub/IuCS/Iur Interface Call Admission Based on Used AAL2 Path Bandwidth ATM Transmission Introduction Package Interval Type
0~4095
0~4095
None
None
Enumeration Type
TRUE, FALSE
TRUE, FALSE
None
FALSE
Enumeration Type
TRUE, FALSE
TRUE, FALSE
None
FALSE
NO, YES
NO, YES
None
NO
0~100
0~100
per cent
40
0~65534
0~65534
None
100
0~100
0~100
per cent
60
0~65534
0~65534
None
200
AMR/WB-AMR Speech Rates Control Inter-RAT Handover Based on DL QoS Interval Type Faulty Enumeration Management Type
ms None
None OPEN
Security Management
Enumeration Type
None
NOLIMIT
Interval Type
0~20
0~2, step:0.1
None
0~20
0~2, step:0.1
None
Interval Type
0~20
0~2, step:0.1
None
Enumeration Type
None
None
Interval Type
1~32767
1~32767
None
None
Security Management
Enumeration Type
SUN(Sunday), MON(Monday), TUE(Tuesday), WED(Wednesday), THU(Thursday), FRI(Friday), SUN, MON, TUE, SAT(Saturday) WED, THU, FRI, SAT None
None
M3UA_ASP(M3UA _ASP), M3UA_IPSP(M3UA M3UA_ASP, _IPSP) M3UA_IPSP Active(Format active area), Standby(Format standby area)
None
M3UA_ASP
Configuration Management
Enumeration Type
Active, Standby
None
Active
None
None
None
Enumeration Type
UNI, NNI
UNI, NNI
None
None
None
Interval Type
30~60000
30~60000
None
1~5
1~5
None
Flow Control
Interval Type
1~100
1~100
per cent
Flow Control
Interval Type
1~100
1~100
per cent
60
0~65535
0~65535
180
Configuration Management
Enumeration Type
GMT-1200(GMT12:00), GMT1100(GMT-11:00), GMT-1000(GMT10:00), GMT0930(GMT-09:30), GMT-0900(GMT09:00), GMT0800(GMT-08:00), GMT-0700(GMT07:00), GMT0600(GMT-06:00), GMT-0500(GMT05:00), GMT0430(GMT-04:30), GMT-0400(GMT04:00), GMT0330(GMT-03:30), GMT-0300(GMT03:00), GMT0200(GMT-02:00), GMT-0100(GMT01:00), GMT(GMT), GMT+0100(GMT+0 1:00), GMT+0200(GMT+0 2:00), GMT+0300(GMT+0 3:00), GMT+0330(GMT+0 3:30), GMT+0400(GMT+0 4:00), GMT+0430(GMT+0 4:30),
GMT-1200(GMT12:00), GMT1100(GMT-11:00), GMT-1000(GMT10:00), GMT0930(GMT-09:30), GMT-0900(GMT09:00), GMT0800(GMT-08:00), GMT-0700(GMT07:00), GMT0600(GMT-06:00), GMT-0500(GMT05:00), GMT0430(GMT-04:30), GMT-0400(GMT04:00), GMT0330(GMT-03:30), GMT-0300(GMT03:00), GMT0200(GMT-02:00), GMT-0100(GMT01:00), GMT(GMT), GMT+0100(GMT+01: 00), GMT+0200(GMT+02: 00), GMT+0300(GMT+03: 00), GMT+0330(GMT+03: 30), GMT+0400(GMT+04: 00), GMT+0430(GMT+04: 30), None
GMT+0800
Recommended Value
Impact
Parameter Relationship
Access
1 RNC
None
None
AAL2 path
None
None
RNC
None
ASC0
Cell
The ASCs are configured through "ADD UPRACHASC". Read & Write
ASC0
Cell
The ASCs are configured through "ADD UPRACHASC". Read & Write
ASC0
Cell
The ASCs are configured through "ADD UPRACHASC". Read & Write
ASC0
Cell
The ASCs are configured through "ADD UPRACHASC". Read & Write
ASC0
Cell
The ASCs are configured through "ADD UPRACHASC". Read & Write
ASC0
Cell
The ASCs are configured through "ADD UPRACHASC". Read & Write
ASC0
Cell
The ASCs are configured through "ADD UPRACHASC". Read & Write
None
Cell
None
80 Board
None
75 Board
None
Enable
PPP link
None
50 RNC
None
100 RNC
When "DsacAutoSwitch"is set to ON,the parameter need configuring;else,need not. Read & Write
None
Cell
Only when "RestrictionType" in "ADD UCELLDSACMANUALPA RA" is RestrictionFixed, this parameter should be configured. Read & Write
AC0-1&AC1-1&AC21&AC3-1&AC4-1&AC51&AC6-1&AC7-1&AC81&AC9-1 RNC
When "DsacAutoSwitch"is set to ON,the parameter need configuring;else,need not. Read & Write When "RestrictionType" in "ADD UCELLDSACMANUALPA RA" is RestrictionFixed, AcRestriction should be configured. When "RestrictionType" in "ADD UCELLDSACMANUALPA RA" is RestrictionFlexible, AcRestriction should not be configured. Read & Write
None
Cell
None
Cell
Only when "RestrictionType" in "ADD UCELLDSACMANUALPA RA" is RestrictionFixed, this parameter should be configured. Read & Write
30 RNC
None
10 RNC
When "DsacAutoSwitch"is set to ON,the parameter need configuring;else,need not. Read & Write
2 RNC
None
OFF
RNC
None
70 Board
None
65 Board
None
ON
Board
None
None
RNC
None
ACTIVE
Cell
This parameter is valid when the "CellLocCfgType" is set to BOTH or CELL_ANTENNA. Read & Write
NODELIVERY
RNC
None
UE_BASED
RNC
None
None
None
None
None
None
None
-6 Cell
None
1 Cell
None
None
None
None
None
None
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
None
RNC
None
None
When "BWMODE" in "ADD RSCGRP" is set to HALF_DUPLEX, this parameter is valid;if the "BWMODE" in "ADD RSCGRP" of upper class and lower class RSCGRP is set to HALF_DUPLEX, the "AllBw" in "ADD RSCGRP" of upper class RSCGRP can not less than the "AllBwE" in "ADD RSCGRP" of lower class RSCGRP;The "AllBw" in "ADD RSCGRP" of upper class RSCGRP can not less than the sum of Transmission "TxBw" and "RxBw" in resource "ADD RSCGRP" of lower group class RSCGRP. Read & Write
Automatic
Cell
None
all
BSC6900
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
4 Cell
This parameter is valid when "InterFreqReportMode" is set to EVENT_TRIGGER. Read & Write
1 Cell
None
4 Cell
This parameter is valid when "InterRatReportMode" is set to EVENT_TRIGGER. Read & Write
1 Cell
None
None
RAB
NO
RNC
None
40 RNC
None
100 RNC
None
60 RNC
None
200 RNC
None
3000 RNC
None
None
None
None
AAL2 path
None
None None
None None
None
BSC6900
None
None
Cell
This parameter is valid when the "CellLocCfgType" is set to BOTH or CELL_ANTENNA. Read & Write
None
Cell
This parameter is valid when the "CellLocCfgType" is set to BOTH or CELL_ANTENNA. Read & Write
None
Cell
This parameter is valid when the "CellLocCfgType" is set to BOTH or CELL_ANTENNA. Read & Write
None
Cell
This parameter is valid when the "CellLocCfgType" is set to BOTH or CELL_ANTENNA. Read & Write
None
Cell
This parameter is valid when the "CellLocCfgType" is set to BOTH or CELL_ANTENNA. Read & Write
None
Cell
This parameter is valid when the "CellLocCfgType" is set to BOTH or CELL_ANTENNA. Read & Write
None
Cell
This parameter is valid when the "CellLocCfgType" is set to BOTH or CELL_ANTENNA. Read & Write
None
Cell
This parameter is valid when the "CellLocCfgType" is set to BOTH or CELL_ANTENNA. Read & Write
OFF
Board
None
FALSE
Cell
None
None
SCTP link
None
None
RAB
None
None
None
None
PRIMARY
None
None
None
RNC
None
None
RNC
None
None
RNC
None
None
RNC
None
None
RNC
None
None
RNC
None
None
RNC
None
None
RNC
None
None
RNC
None
None
RNC
None
None
RNC
None
None
RNC
None
None
RNC
None
None
RNC
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
ALLOWED
RNC
ATT needs to be set when "CNDomainId" is set to CS_DOMAIN; ATT does not need to be set when "CNDomainId" is set to PS_DOMAIN. Read & Write
60 None
None
1 E1/T1 port
None
None
BSC6900
None
None
PPP link
None
None
MP group
None
None
PPP link
None
None
MP group
None
None
PPP link
None
None
MP group
None
NO_V
PPP link
None
NO_V
MP group
None
ENABLE None
None
BSC6900
None
AU4
None
7 Cell
"AvailablesignatureEndIn dex" should be less than the number of preamble signatures. The preamble signature is configured by "PreambleSignatures" in "ADD UPRACHBASIC". Read & Write
0 Cell
"AvailablesignatureStartIn dex" should be no greater than "AvailablesignatureEndIn dex ". Read & Write
Physical 15 channel
None
None
RNC
None
None
None
None
None
Board
None
None
Board
None
None
Board
None
None
Board
None
None
Board
None
None
Board
None
61 Cell
None
None
BSC6900
None
None
BSC6900
None
None
None
None
None
None
Cell
None
None
None
Cell
None
None
None
Cell
None
None
Cell
None
0 Cell
None
-30 Cell
None
None
None
SCCP
None
None
RNC
None
5 RNC
None
2 RNC
None
1 RNC
None
D384
RNC
None
5 RNC
None
5 RNC
None
5 RNC
None
5 RNC
None
RateDegrade
RNC
Valid when "BEQosPerform" is set to YES; "BeDlAct2" and "BeDlAct3" must be None when "BeDlAct1" is set to None; "BeDlAct2" and "BeDlAct3" must not be equal with "BeDlAct1" when "BeDlAct1" is not set to None. Read & Write
None
RNC
Valid when "BEQosPerform" is set to YES; "BeDlAct2" must be None when "BeDlAct1" is set to None; "BeDlAct2" must not be equal with "BeDlAct1" when "BeDlAct1" is not set to None; "BeDlAct3" must be None when "BeDlAct2" is set to None; "BeDlAct3" must not be equal with "BeDlAct2" and "BeDlAct1" when "BeDlAct2" is not set to None. Read & Write
None
RNC
Valid when "BEQosPerform" is set to YES; "BeDlAct3" must be None when "BeDlAct1" or "BeDlAct2" is set to None; "BeDlAct3" must not be equal with "BeDlAct1" when "BeDlAct1" is not set to None. "BeDlAct3" must not be equal with "BeDlAct2" when "BeDlAct2" is not set to None. Read & Write
5 RNC
None
D1024
RNC
The following relationship must be satisfied: "BeH2FTvmThd" < "BeEFach2CpcTvmThd". Read & Write
D0
RNC
None
D1024
RNC
The following relationship must be satisfied: "D2F2PTvmThd" < "BeEFach2DTvmThd". Read & Write
D0
RNC
None
D1024
RNC
The following relationship must be satisfied: "BeH2FTvmThd" < "BeEFach2HTvmThd". Read & Write
D0
RNC
None
D1024
RNC
None
D0
RNC
None
D1024
RNC
The following relationship must be satisfied: "BeH2FTvmThd" < "BeF2CpcTvmThd". Read & Write
D0
RNC
None
D1024
RNC
The following relationship must be satisfied: "D2F2PTvmThd" < "F2DTvmThd". Read & Write
D0
RNC
None
D1024
RNC
None
D0
RNC
None
D1024
RNC
The following relationship must be satisfied: "BeH2FTvmThd" < "BeF2HTvmThd". Read & Write
D0
RNC
None
65535 RNC
None
5 RNC
None
5 RNC
None
D1000
RNC
None
D64
RNC
The following relationship must be satisfied: "BeH2FTvmThd" < "BeF2HTvmThd"; "BeH2FTvmThd" < "BeEFach2HTvmThd"; "BeH2FTvmThd" < "BeEFach2CpcTvmThd"; "BeH2FTvmThd" < "BeF2CpcTvmThd". Read & Write
D5000
RNC
None
D1440
RNC
None
20 RNC
10 Cell
This parameter is available if the value of "BEQosPerform" in "SET UQOSACT" is YES. Read & Write
YES
RNC
None
None
RAB
At least one of this parameter and the "BetaD" parameter must be set to 15.
None
RAB
At least one of this parameter and the "BetaC" parameter must be set to 15.
None
RNC
Valid when "BEQosPerform" is set to YES; "BeUlAct2" and "BeUlAct3" must be None when "BeUlAct1" is set to None; "BeUlAct2" and "BeUlAct3" must not be equal with "BeUlAct1" when "BeUlAct1" is not set to None. Read & Write
None
RNC
Valid when "BEQosPerform" is set to YES; "BeUlAct2" must be None when "BeUlAct1" is set to None; "BeUlAct2" must not be equal with "BeUlAct1" when "BeUlAct1" is not set to None. "BeUlAct3" must be None when "BeUlAct2" is set to None; "BeUlAct3" must not be equal with "BeUlAct2" and "BeUlAct1" when "BeUlAct2" is not set to None. Read & Write
None
RNC
Valid when "BEQosPerform" is set to YES; "BeUlAct3" must be None when "BeUlAct1" or "BeUlAct2" is set to None; "BeUlAct3" must not be equal with "BeUlAct1" when "BeUlAct1" is not set to None. "BeUlAct3" must not be equal with "BeUlAct2" when "BeUlAct2" is not set to None. Read & Write
SINGLE
RNC
YES
RNC
This parameter is valid when the "BEQosPerform" is set to YES and "BeUlEvTrigInd" is set to SINGLE. Read & Write
YES
RNC
This parameter is valid when the "BEQosPerform" is set to YES and "BeUlEvTrigInd" is set to SINGLE. Read & Write
NO
RNC
3000 RNC
None
32 Cell
This parameter must satisfy the following relationship: "BGMBR" >= "BGGBR" Read & Write
512 Cell
This parameter must satisfy the following relationship: "BGMBR" >= "BGGBR" Read & Write
100 Cell
The value of this parameter must satisfy the following relationship: "BgnAbnormalThd" >= "BgnUpdateThd" Read & Write
120 Cell
None
06&00&00
Cell
The value of this parameter must satisfy the following relationship: "BgnEndTime" >"MBgnStartTime" . Read & Write
0 Cell
None
01&00&00
Cell
The value of this parameter must satisfy the following relationship: "BgnEndTime" >"MBgnStartTime" . Read & Write
ON
Cell
None
5 Cell
The value of this parameter must satisfy the following relationship: "BgnAbnormalThd" >= "BgnUpdateThd" Read & Write
None
RAB
This parameter is required when the "TrchType" parameter is set to TRCH_DCH. The setting of the "SirAdjustStep" parameter is associated with this parameter. Assume that this parameter is changed from BLERquality1 to BLERquality2 and "SirAdjustStep" is changed from SirAdjustStep1 to SirAdjustStep2. Then, these values must fulfill the following condition: (1BLERquality1) x SirAdjustStep1 / BLERquality1 = (1 BLERquality2) x SirAdjustStep2 / BLERquality2. Read & Write
FALSE
Cell
None
D2
RNC
None
D250
RNC
None
None
Cell
This paramter is valid only when "BlindHoFlag" is set to TRUE. Read & Write
-92 Cell
This paramter is valid only when "BlindHOFlag" is set to TRUE. Read & Write
-115 Cell
None If you set "Switch of stat blinking alarm" to "ENABLE", you need to set "Alarm switch of blinking filter" to "ENABLE".
None
BSC6900
None
BSC6900
None
None
BSC6900
None
None
BSC6900
If you set "Switch of stat blinking alarm" to "ENABLE", you need to set "Alarm switch of blinking filter" to "ENABLE".
None
NO
MP group
None
None
BSC6900
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
REQUIRED
Cell
None
None
None
None
None
None
None
None
None
None
None
None
None
None
E1/T1 port
None
None
Cell
None
None
E1/T1 port
None
None
BSC6900
None
None
Board
None
None
None
None
None
None
None
NO
SCTP link
None
None
The dynamic bandwidth switch is turned only when the IPPM function is activated through "ACT IP logical port IPPM". Read & Write
0 BSC6900
None
0 BSC6900
None
20 BSC6900
None
15 BSC6900
None
0 BSC6900
None
1 BSC6900
None
0 BSC6900
None
0 BSC6900
None
5 BSC6900
None
0 BSC6900
None
None
Transmission When "GRPT" in "ADD resource RSCGRP" is set to IP, group this parameter is valid.
ON
RNC
None
RNC
None
3 RNC
None
NONE
RNC
None
None
AAL2 path
When the value of "CARRYT" in "ADD AAL2PATH" is set to UNI, IMA, FRAATM, NCOPT, or ATM LGCPORT, this parameter is valid. Read & Write
NULL
IP path
None
None
SAAL link
When the value of "CARRYT" is set to FRAATM, this parameter is valid. Read & Write
None
AAL2 path
When the value of "CARRYT" in "ADD AAL2PATH" is set to FRAATM, this parameter is valid. Read & Write
None
IPoA PVC
None
None
None
None
SAAL link
None None
When the value of "CARRYT" in "ADD AAL2PATH" is set to IMA, this parameter is valid. Read & Write None Read & Write
None
None
None
NodeB
None
None
SAAL link
When the value of "CARRYT" is set to NCOPT, this parameter is valid. Read & Write
None
AAL2 path
When the value of "CARRYT" in "ADD AAL2PATH" is set to NCOPT, this parameter is valid. Read & Write
None
IPoA PVC
None
None
None
None
SAAL link
When the value of "CARRYT" is set to IMA, UNI, FRAATM, NCOPT, or ATMLOGICPORT, this parameter is valid. Read & Write When the value of "CARRYT" in "ADD AAL2PATH" is set to UNI, IMA, FRAATM, NCOPT, or ATM LGCPORT, this parameter is valid. Read & Write When the value of "CARRYT" is set to IMA, UNI, FRAATM, NCOPT, or ATMLOGICPORT, this parameter is valid. Read & Write
None
AAL2 path
None
SAAL link
None
SAAL link
None
None
AAL2 Path
When the value of "RscMngMode" in "ADD NODEB" of the resource corresponding NodeB is set to EXCLUSIVE, the AAL2 Path must carry on ATM LGCPORT or RSCGRP Read & Write
None
IPoA PVC
None
None
None
None
None
None
None
None
SAAL link
None None
When the value of "CARRYT" in "ADD AAL2PATH" is set to UNI, this parameter is valid. Read & Write None Read & Write
None
None
None
SAAL link
When the value of "CARRYT" is set to IMA, UNI, FRAATM, NCOPT, or ATMLOGICPORT, this parameter is valid. Read & Write
None
IPoA PVC
None
None
SAAL link
When the value of "CARRYT" is set to IMA, UNI, FRAATM, NCOPT, or ATMLOGICPORT, this parameter is valid. Read & Write
None
IPoA PVC
None
None
SAAL link
None
AAL2 path
When the value of "CARRYT" in "ADD AAL2PATH" is set to ATM LGCPORT, this parameter is valid. Read & Write
None
IPoA PVC
None
None
Subsystem
None
None
Subsystem
None
85 Board
None
80 Board
None
None
Cell
None
75 Board
None
70 Board
None
None
Cell
Before configuring this parameter, you need to configure the information about the common traffic logical channel by running "ADD UCTCH". At the same time, you need to set the CBS scheduling parameter of the cell by running "ADD UCELLCBSDRX". Read & Write
None
Cell
None
ON
Board
None
OFF
RNC
None
None
BSC6900
None
32 Cell
This parameter must satisfy the following relationship: "CCCHMBR" >= "CCCHGBR" Read & Write
512 Cell
This parameter must satisfy the following relationship: "CCCHMBR" >= "CCCHGBR" Read & Write
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transmission type is IP or Hybrid IP, the parameter is EF. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transmission type is IP, the parameter is EF. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
100 BSC6900
None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transmission type is dual stack, the parameter is EF; transmission type is Hybrid IP, the parameter is LQEF. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
0 BSC6900
None
1000(UNI), 200(NNI)
SAAL link
None
1024 PVC
None
15 RNC
None
None
Cell
This parameter is valid when the "CellLocCfgType" is set to BOTH or CELL_ANTENNA. Read & Write
None
Cell
This parameter is valid when the "CellLocCfgType" is set to BOTH or CELL_ANTENNA. Read & Write
None
Cell
None
None
Cell
None
None
Cell
This parameter is valid when the "CellLocCfgType" is set to BOTH or CELL_CENTER. Read & Write
None
Cell
This parameter is valid when the "CellLocCfgType" is set to BOTH or CELL_CENTER. Read & Write
None
Cell
This parameter is valid when the "CellLocCfgType" is set to BOTH or CELL_CENTER. Read & Write
None
Cell
This parameter is valid when the "CellLocCfgType" is set to BOTH or CELL_CENTER. Read & Write
None
Cell
This parameter is valid when the "CellLocCfgType" is set to BOTH or CELL_CENTER. Read & Write
None
Cell
This parameter is valid when the "CellLocCfgType" is set to BOTH or CELL_CENTER. Read & Write
None
Cell
None
MIXED_ENVIRONMEN T Cell
This parameter is valid when the "CellLocCfgType" is set to BOTH or CELL_ANTENNA. Read & Write
TU
Cell
None
None
Cell
This parameter is valid when the "CellLocCfgType" is set to BOTH or CELL_ANTENNA. Read & Write
None
Cell
This parameter is valid when the "CellLocCfgType" is set to BOTH or CELL_ANTENNA. Read & Write
15 RNC
None
SINGLE_HOST
Cell
None
None
None
None
None
Cell
None
None
Cell
None
None
Cell
The SMLC parameters of the cell identified by this parameter must have been configured through "ADD USMLCCELL". Read & Write
None
None
None
None
Cell
None
None
Cell
None
None
Cell
10 RNC
OFF
RNC
None
ACTIVE
Cell
This parameter is valid when the "CellLocCfgType" is set to BOTH or CELL_ANTENNA. Read & Write
UE_ASSISTED
RNC
None
SF8
Cell
The value of this parameter must not be larger than "DlHoCeCodeResvSf" in "ADD UCELLCAC".
None
Cell
None
None
Cell
None
90 Cell
The value of this parameter must satisfy the following relationship: "CellOverrunThd" >= "CellUnderrunThd". Read & Write
9 RNC
None
180 RNC
None
NOT_RESERVED
Cell
None
NOT_RESERVED
Cell
None
AFFECT
Cell
None
AFFECT
Cell
None
45 RNC
None
30 Cell
The value of this parameter must satisfy the following relationship: "CellOverrunThd" >= "CellUnderrunThd". Read & Write
85 Board
None
80 Board
None
75 Board
None
70 Board
None
ON
Board
None
None
BSC6900
None
None
Cell
None
None
RNC
None
CFG_DL_BLIND_DETE CTION_SWITCH:ON, CFG_HSDPA_64QAM_ SWITCH:ON, CFG_HSDPA_MIMO_S WITCH:ON, CFG_HSPA_DTX_DRX _SWITCH:OFF, CFG_HSPA_HSSCCH_ LESS_OP_SWITCH:OF F, CFG_IMS_SUPPORT_ SWITCH:ON, CFG_LOSSLESS_DLRL C_PDUSIZECHG_SWIT CH:OFF, CFG_LOSSLESS_REL OC_CFG_SWITCH:OF F, CFG_MULTI_RAB_SWI TCH:ON, CFG_PDCP_IPV6_HEA D_COMPRESS_SWITC H:OFF, CFG_PDCP_RFC2507_ HC_SWITCH:OFF, CFG_PDCP_RFC3095_ HC_SWITCH:OFF RNC
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
2 RNC
None
5 RNC
None
CONVOLUTIONAL
Transport channel
None
5 IP path
When the value of "PATHCHK" in "ADD IPPATH" is set to ENABLED, this parameter is valid. Read & Write
None
RNC
None
None
None
None
None
None
None
NO
SCTP link
None
NO
SCTP link
None
CRC32
SCTP link
None
None
None
None
TEN_MSEC
RNC
None
TEN_MSEC
RNC
None
TEN_MSEC
RNC
None
TEN_MSEC
RNC
None
TEN_MSEC
RNC
None
TEN_MSEC
RNC
None
TEN_MSEC
RNC
None
TEN_MSEC
Cell
None
TEN_MSEC
Cell
None
TEN_MSEC
Cell
None
TEN_MSEC
Cell
None
None
RNC
None
None
Cell
None
0 Cell
None
0 Cell
None
0 Cell
None
0 Cell
None
0 Cell
None
None
ERR_PFM_5E6
Board
None
None
BSC6900
None
None
BSC6900
None
FALSE
Cell
None
UL_DL_BOTH
NodeB
None
None
CMCF_DL_HLS_SWIT CH:OFF, CMCF_UL_HLS_SWIT CH:OFF, CMCF_UL_PRECFG_T OLERANCE_SWITCH: OFF, CMCF_WITHOUT_UE_ CAP_REPORT_SWITC H:OFF RNC
None
5000 RNC
None
None
BSC6900
None
None
BSC6900
None
None BSC6900 CMP_IU_IMS_PROC_A S_NORMAL_PS_SWIT CH:OFF, CMP_IU_SYSHOIN_CM P_IUUP_FIXTO1_SWIT CH:OFF, CMP_IUR_H2D_FOR_L OWR5_NRNCCELL_S WITCH:OFF, CMP_IUR_SHO_DIVCT RL_SWITCH:OFF, CMP_UU_AMR_SID_M UST_CFG_SWITCH:OF F, CMP_UU_DST_SERV_ CELL_D2E_SWITCH:O FF, CMP_UU_IGNORE_UE _RLC_CAP_SWITCH:O N, CMP_UU_SERV_CELL _CHG_WITH_ASU_SW ITCH:OFF, CMP_UU_SERV_CELL _CHG_WITH_RB_MOD _SWITCH:ON, CMP_UU_VOIP_UP_P ROC_AS_NORMAL_PS _SWITCH:ON, CMP_UU_FDPCH_CO MPAT_SWITCH:OFF, CMP_UU_AMR_DRD_H HO_COMPAT_SWITCH :OFF, CMP_IU_QOS_ASYMM RNC
None
None
None
None
None
None
RNC
None
None
RAB
This parameter cannot be set to CS_DOMAIN when the "TrafficClass" parameter is set to INTERACTIVE or BACKGROUND. Read & Write
None
RAB
None
None
RNC
None
None
RNC
None
None
None
None
None None
None BSC6900
None None
None
RNC
None
None
RNC
None
None
Cell
This paramter is valid only when "CnOpGrpIndex" in "ADD CNOPERGROUP" is added. Read & Write This paramter is valid only when "CnOpGrpIndex" in "ADD CNOPERGROUP" is added. Read & Write
None
Cell
None
RNC
None
None
When "RSCMNGMODE" Transmission in "ADD RSCGRP" is set resource to EXCLUSIVE, this group parameter is valid. Read & Write
None
RNC
None
None
RNC
None
None
Cell
None
None
BSC6900
None
None
RNC
None
None
RNC
None
None
RNC
None
None
RNC
None
None
RNC
None
None
RNC
None
None
RNC
None
None
BSC6900
None
None
BSC6900
None
None
None
None
None
None
None
ON
Cell
None
3 Cell
This paramter is valid only when "CodeAdjForHsdpaSwitch " is set to ON. Read & Write
13 Cell
If this parameter is set through both the "ADD UCELLDRD" and "SET UDRD" commands, the parameter set through the "ADD UCELLDRD" command takes precedence over that set through the "SET UDRD" command. This parameter is valid only when the "CodeBalancingDrdSwitc h" parameter is set to ON. Read & Write
13 RNC
If this parameter is set through both the "ADD UCELLDRD" and "SET UDRD" commands, the parameter set through the "ADD UCELLDRD" command takes precedence over that set through the "SET UDRD" command. This parameter is valid only when the "CodeBalancingDrdSwitc h" parameter is set to ON. Read & Write
SF8
Cell
If this parameter is set through both the "ADD UCELLDRD" and "SET UDRD" commands, the parameter set through the "ADD UCELLDRD" command takes precedence over that set through the "SET UDRD" command. This parameter is valid only when the "CodeBalancingDrdSwitc h" parameter is set to ON. Read & Write
SF8
RNC
If this parameter is set through both the "ADD UCELLDRD" and "SET UDRD" commands, the parameter set through the "ADD UCELLDRD" command takes precedence over that set through the "SET UDRD" command. This parameter is valid only when the "CodeBalancingDrdSwitc h" parameter is set to ON. Read & Write
OFF
Cell
If this parameter is set through both the "ADD UCELLDRD" and "SET UDRD" commands, the parameter set through the "ADD UCELLDRD" command takes precedence over that set through the "SET UDRD" command. Read & Write
OFF
RNC
If this parameter is set through both the "ADD UCELLDRD" and "SET UDRD" commands, the parameter set through the "ADD UCELLDRD" command takes precedence over that set through the "SET UDRD" command. Read & Write
FALSE
Cell
This parameter is valid only when INTER_FREQ_HHO_SW ITCH of the "HoSwitch" in "SET UCORRMALGOSWITCH " is set to ON. Read & Write
ENGLISH
RNC
None
D1/2
Transport channel
Configured only when the "ChCodingType" is configured as CONVOLUTIONAL. Read & Write
None
70 RNC
None
20 Cell
This parameter is available if the value of "BEQosPerform" in "SET UQOSACT" is YES. Read & Write
None
RNC
None
NONSUPPORTING_UE_ON LY RNC
When "MOCNSupport" in "SET UOPERATORSHARING MODE" is set to YES, CommPlmnUsingType needs to be set.Otherwise,it does not need. Read & Write
None
BSC6900
None
2 SAAL link
30 SAAL link
10 SAAL link
IP:15; ATM:20
BSC6900
None
IP:15; ATM:20
BSC6900
None
IP:15; ATM:20
BSC6900
None
IP:15; ATM:25
BSC6900
None
25 BSC6900
None
25 BSC6900
None
IP:25; ATM:30
BSC6900
None
IP:25; ATM:30
BSC6900
None
IP:25; ATM:30
BSC6900
None
IP:25; ATM:50
BSC6900
None
50 BSC6900
None
50 BSC6900
None
None
Cell
None
Only_To_Inter_Frequen cy RNC
None
NOT_ALLOWED
Cell
This parameter is valid only when "ConnCellBarred" is set to BARRED. Read & Write
NO
None
None
2 Cell
None
1 Cell
0 Cell
This parameter is valid when "SIB12Ind" is set to TRUE. Read & Write
0 Cell
This parameter is valid when "SIB12Ind" is set to TRUE. Read & Write
4 Cell
None
5 Cell
None
D1280
Cell
This parameter is valid only when "ConnCellBarred" is set to BARRED. Read & Write
None
BSC6900
None
-20 Cell
None
NO
D16
RNC
None
D16
RNC
None
32 Cell
This parameter must satisfy the following relationship: "CONVMBR" >= "CONVGBR" Read & Write
512 Cell
This parameter must satisfy the following relationship: "CONVMBR" >= "CONVGBR" Read & Write
NBAMR_BITRATE_12.2 0K Cell
The following relationship must be satisfied: "GoldMaxMode" >= "SilverMaxMode" >= "CopperMaxMode". Read & Write
The following relationship must be satisfied: "GoldMaxMode" >= "SilverMaxMode" >= "CopperMaxMode". Read & Write
None
RNC
CountCThreshold needs to be set when "CounterCheckSwitch" in "SET UCNTCHK" is set to ON; CountCThreshold does not need to be set when "CounterCheckSwitch" in "SET UCNTCHK" is set to OFF. Read & Write
None
RNC
None
CP1_not_Supported
Cell
This paramter is valid only when "TxDiversityInd" is set to TRUE. Read & Write
CP1_not_Supported
Cell
This paramter is valid only when "TxDiversityInd" is set to TRUE. Read & Write
90 Board
None
80 Board
None
90 RNC
None
None
RNC
D2
RNC
None
BSC6900
None
None
BSC6900
None
8 Cell
This parameter is required when the "UseOfHcs" parameter is set to USED but not required when the "UseOfHcs" parameter is set to NOT_USED. Read & Write
UNAVAILABLE
SCTP link
None
85 Board
None
75 Board
None
75 Board
None
65 Board
None
100 BSC6900
None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transmission type is IP or Hybrid IP, the parameter is AF43. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transmission type is IP, the parameter is AF43. When the interface type is Iu-CS, transmission type is ATM, the parameter is RT_VBR; transmission type is IP, the parameter is AF43. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR or IUCS, this parameter is valid. Read & Write
100 BSC6900
None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transmission type is dual stack, the parameter is AF43; transmission type is Hybrid IP, the parameter is LQAF43. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. When the interface type is Iu-CS, transmission type is ATM or IP, the parameter is NULL. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
0 BSC6900
None
100 BSC6900
None
None
BSC6900
None
80 Cell
This parameter is valid when "NcovHoOn2GldInd" in "SET UINTERRATHONCOV" is set to ON. Read & Write
OFF
RNC
None
900 RNC
CsInfoUpdTmr needs to be set when "CsInfoUpdFlag" in "SET UOPERATORCFGPARA" is set to ON; CsInfoUpdTmr does not need to be set when "CsInfoUpdFlag" in "SET UOPERATORCFGPARA" is set to OFF. Read & Write
SUPP_NONE
RNC
CsNriCfgMode may be set to SUPP_IUFLEX when "CNProtclVer" in "ADD UCNNODE" is set to R5 or any later version CsNriCfgMode may be set to SUPP_MOCN or SUPP_IUFLEX_MOCN when "CNProtclVer" in "ADD UCNNODE" is set to R6 or any later version Read & Write
None
None
CSNRILength needs to be set when the value of "CsNriCfgMode" in "SET UOPERATORCFGPARA" is set to SUPP_IUFLEX, SUPP_MOCN or SUPP_IUFLEX_MOCN; CSNRILength does not need to be set when the value of "CsNriCfgMode" in "SET UOPERATORCFGPARA" is set to SUPP_NONE. Read & Write
None
Cell
None
TRUE
RNC
When "DsacAutoSwitch"is set to ON,the parameter need configuring;else,need not. Read & Write
OFF
Cell
None
100 BSC6900
None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transmission type is IP or Hybrid IP, the parameter is AF43. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transmission type is IP, the parameter is AF43. When the interface type is Iu-CS, transmission type is ATM, the parameter is RT_VBR; transmission type is IP, the parameter is AF43. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR or IUCS, this parameter is valid. Read & Write
100 BSC6900
None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transmission type is dual stack, the parameter is AF43; transmission type is Hybrid IP, the parameter is LQAF43. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. When the interface type is Iu-CS, transmission type is ATM or IP, the parameter is NULL. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
0 BSC6900
None
100 BSC6900
None
CS_AMRC_SWITCH:O FF, CS_HANDOVER_TO_U TRAN_DEFAULT_CFG _SWITCH:ON, CS_IUUP_V2_SUPPOR T_SWITCH:OFF, CS_ZERO_C_AMR_CF G_TWO_CODCH_SWI TCH:OFF RNC
None
DCH
RNC
None
5 RNC
None
5 RNC
None
EDCH_TTI_10ms
RNC
None
OFF
RNC
None
ON
BSC6900
none
None
Physical channel
None
BIT2
Physical channel
None
BIT4
Physical channel
None
95 Board
None
85 Board
None
5 RNC
None
50 RNC
None
None
OFF
BSC6900
None
None
BSC6900
None
None
RNC
None
D64
RNC
The following relationship must be satisfied: "D2F2PTvmThd" < "F2DTvmThd"; "D2F2PTvmThd" < "BeEFach2DTvmThd". Read & Write
D1000
RNC
None
D5000
RNC
None
None
None
None
NOLIMIT None
BSC6900 BSC6900
None None
30 RNC
None
30 RNC
None
RATE_UP_AND_DOW N_ON_DCH
RNC
None
30 RNC
None
100 RNC
None
16 RAB
None
2 RAB
None
255 RNC
When "MOCNSupport" in "SET UOPERATORSHARING MODE" is set to YES, DefaultCnOp optionally needs to be set.Otherwise,it does not need. Read & Write
-22 RNC
None
-13 Cell
None
25(AEUa),200(AOUa/A OUc)
IMA group
None
None
RNC
None
None
RAB
None
None
RAB
None
7 RNC
This parameter is valid only when the "CodeBalancingDrdSwitc h" parameter is set to ON through the "SET UDRD" command. Read & Write
None
Cell
This paramter is valid only when "QrxlevminExtSup" is set to TRUE. Read & Write
None
Cell
This parameter is required when the "QrxlevminExtSup" parameter is set to TRUE but not required when the "QrxlevminExtSup" parameter is set to FALSE. Read & Write
None
SCCP
None
None
BSC6900
None
None
RNC
None
None
None
BSC6900
None
None
None
None
None
None
BSC6900
None
None
BSC6900
None
DEFAULTPORT
BSC6900
None
1 None
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
None
RAB
None
MAY
RNC
None
50 RNC
This parameter is valid only when "AFSetObj" is set to GOLD, SILVER, or COPPER. Read & Write
64 Cell
None
10 RNC
This parameter is valid only when "AFSetObj" is set to GOLD, SILVER, or COPPER. Read & Write
D6
RNC
None
D128
RNC
None
D8
RNC
If this parameter is set through both the "SET UFRCCHLTYPEPARA" and "ADD UCELLFRC" commands, the parameter set through the "ADD UCELLFRC" command takes precedence over that set through the "SET UFRCCHLTYPEPARA" command. Read & Write
D8
Cell
If this parameter is set through both the "SET UFRCCHLTYPEPARA" and "ADD UCELLFRC" commands, the parameter set through the "ADD UCELLFRC" command takes precedence over that set through the "SET UFRCCHLTYPEPARA" command. Read & Write
D64
RNC
This parameter can be used for selection of the initial rate for BE services only when the DCCC_SWITCH under the "Chswitch" parameter is set to on through the "SET CORRMALGOSWITCH" command. Read & Write
D64
RNC
None
64 Cell
None
64 Cell
None
5 RNC
None
0 Cell
None
90 Cell
The value of this parameter must satisfy the following relationship: "DlOlcTrigThd"(See "ADD UCELLLDM") >= "DlCellTotalThd"; "DlCellTotalThd" >= "DlHOThd" Read & Write
SF/2
NodeB
None
None
Cell
The value of this parameter must satisfy the following relationship: "DLOVSFSF">"DLCODE NO". Read & Write
80 Cell
The value of this parameter must satisfy the following relationship: "DlHOThd" > "DlConvAMRThd"; "DlConvAMRThd" > "DlOtherThd" Read & Write
80 Cell
The value of this parameter must satisfy the following relationship: "DlHOThd" > "DlConvNonAMRThd"; "DlConvNonAMRThd" > "DlOtherThd" Read & Write
3 Cell
None
3 NodeB
None
3 Cell
None
3 NodeB
None
D64
RNC
When the value of "DlMidRateCalc" is HAND_APPOINT, the following relationship must be satisfied: "DlDcccRateThd" <= "DlMidRateThd".
D64
Cell
This parameter is available if the value of "BEQosPerform" in "SET UQOSACT" is YES. Read & Write
D64
RNC
For the BE users with the same "TrafficClass", "THPClass" and "BearType" values, make sure: "UlGBR" of GOLD users ("UserPriority" is set to GOLD) >= "UlGBR" of SILVER users ("UserPriority" is set to SILVER) >= "UlGBR" of COPPER users ("UserPriority" is set to COPPER). Read & Write
SF32
Cell
The value of this parameter must satisfy the following relationship: "DlHoCeCodeResvSf" >= "DlLdrCreditSfResThd"; "DlHoCeCodeResvSf" >= "CellLdrSfResThd". (For detailed information, refer to "ADD UCELLLDR") Read & Write
85 Cell
The value of this parameter must satisfy the following relationship: "DlCellTotalThd" >= "DlHOThd" ; "DlHOThd" > "DlConvAMRThd"; "DlHOThd" > "DlConvNonAMRThd" Read & Write
0 Cell
None
10 RNC
This parameter is valid only when "AFSetObj" is set to GOLD, SILVER, or COPPER. Read & Write
200000 Cell
None
20 Cell
None
1 Cell
None
5 RNC
None
1 Cell
None
1 NodeB
None
SF8
Cell
The value of this parameter must not be larger than "DlHoCeCodeResvSf" in "ADD UCELLCAC".
SF8
NodeB
None
NoAct
Cell
None
NoAct
Cell
None
NoAct
NodeB
None
CodeAdj
Cell
None
BERateRed
NodeB
None
NoAct
Cell
None
NoAct
NodeB
None
NoAct
Cell
None
1 Cell
None
1 NodeB
None
60 Cell
The value of this parameter must satisfy the following relationship: "DlLdrTrigThd" >= "DlLdrRelThd"; "DlOlcRelThd" >= "DlLdrRelThd". Read & Write
InterFreqLDHO
Cell
None
NoAct
NodeB
None
NoAct
Cell
None
NoAct
Cell
None
NoAct
NodeB
None
NoAct
Cell
None
BERateRed
Cell
None
NoAct
NodeB
None
70 Cell
The value of this parameter must satisfy the following relationship: "DlLdrTrigThd" >= "DlLdrRelThd"; "DlOlcTrigThd" > "DlLdrTrigThd"; "DlOtherThd"(See "ADD UCELLCAC") >= "DlLdrTrigThd". Read & Write
1000 Cell
None
D64
NodeB
None
0 Cell
None
D1
Cell
None
HAND_APPOINT
RNC
This parameter is valid when the "DlRateUpAdjLevel" in "SET UDCCC" is set to 3_Rates, or when "DlRateDnAdjLevel" in "SET UDCCC" is set to 3_Rates.
D128
RNC
This parameter is valid when the "DlMidRateCalc" in "SET UDCCC" is set to HAND_APPOINT, and the following relationship must be satisfied: "DlDcccRateThd" <= "DlMidRateThd".
3000 RNC
The following relationship must be satisfied: "UlModeChangeTimerLen " <= "DlModeChangeTimerLen ". Read & Write
3000 RNC
The following relationship must be satisfied: "UlModeChangeTimerLen " <= "DlModeChangeTimerLen ". Read & Write
100 RNC
This parameter is valid only when "AFSetObj" is set to GOLD, SILVER, or COPPER. Read & Write
5 RNC
None
3 Cell
None
3 Cell
None
D3
RNC
None
85 Cell
The value of this parameter must satisfy the following relationship: "DlOlcTrigThd" >= "DlOlcRelThd"; "DlOlcRelThd" >= "DlLdrRelThd". Read & Write
0 Cell
None
100 RNC
None
95 Cell
The value of this parameter must satisfy the following relationship: "DlOlcTrigThd" >= "DlOlcRelThd"; "DlOlcTrigThd" > "DlLdrTrigThd"; "DlOlcTrigThd" >= "DlCellTotalThd". Read & Write
75 Cell
The value of this parameter must satisfy the following relationship: "DlConvAMRThd" > "DlOtherThd"; "DlConvNonAMRThd" > "DlOtherThd"; "DlOtherThd" >= "DlLdrTrigThd"(See "ADD UCELLLDM") Read & Write
None
Cell
The value of this parameter must satisfy the following relationship: "DLOVSFSF">"DLCODE NO". Read & Write
1 Cell
None
1 NodeB
None
1 Cell
None
1 NodeB
None
NO
RNC
NO
RNC
NO
RNC
20 Cell
None
NO
RNC
This parameter is valid when the "VPQosPerform" is set to YES. Read & Write
NO
RNC
NO
RNC
NO
RNC
OFF
RNC
None
3_Rates
RNC
None
3_Rates
RNC
None
5 Cell
None
None
Cell
None
FALSE
RNC
None
D64
Cell
None
10 RNC
100 RNC
This parameter is valid only when "AFSetObj" is set to GOLD, SILVER, or COPPER. Read & Write
D64
RNC
None
50 RNC
The following relationship must be satisfied: "DlThdE1" <= "DlThdE2" < "DlThdF2" <= "DlThdF1". Read & Write
50 RNC
The following relationship must be satisfied: "DlThdE1" <= "DlThdE2" < "DlThdF2" <= "DlThdF1". Read & Write
50 RNC
The following relationship must be satisfied: "DlThdE1" <= "DlThdE2" < "DlThdF2" <= "DlThdF1". Read & Write
50 RNC
The following relationship must be satisfied: "DlThdE1" <= "DlThdE2" < "DlThdF2" <= "DlThdF1". Read & Write
120 RNC
The following relationship must be satisfied: "DlThdE1" <= "DlThdE2" < "DlThdF2" <= "DlThdF1". Read & Write
120 RNC
The following relationship must be satisfied: "DlThdE1" <= "DlThdE2" < "DlThdF2" <= "DlThdF1". Read & Write
120 RNC
The following relationship must be satisfied: "DlThdE1" <= "DlThdE2" < "DlThdF2" <= "DlThdF1". Read & Write
120 RNC
The following relationship must be satisfied: "DlThdE1" <= "DlThdE2" < "DlThdF2" <= "DlThdF1". Read & Write
80 Cell
None
None None
None None
RNC None
None None
None
SCCP
When the value of "SPDF" in "ADD N7DPC" is set to DNF, this parameter is valid. Read & Write
D1
RNC
D1
RNC
SLOT_FORMAT_1
RNC
None
None
SCCP
None
None
Cell
None
None
Cell
This paramter is valid only when "TxDiversityInd" is set to TRUE. Read & Write
None
Cell
This paramter is valid only when "TxDiversityInd" is set to TRUE. Read & Write
None
Cell
This paramter is valid only when "TxDiversityInd" is set to TRUE. Read & Write
SINGLE_TPC
RNC
None
None
SCCP
None
None
None
None
SCCP
None
None
Adjacent node
When the value of "NODET" in "ADD ADJNODE" is set to IUR, IUCS, or NNI_AAL2SWITCH, or the value of "NODET" in "ADD ADJNODE" is set to IUPS and "SGSNFLG" in "ADD ADJNODE" is set to YES, this parameter is valid. Read & Write
None
RNC
None
DRA_AQM_SWITCH:O FF, DRA_BE_EDCH_TTI_R ECFG_SWITCH:ON, DRA_BE_RATE_DOWN _BF_HO_SWITCH:OFF , DRA_DCCC_SWITCH: ON, DRA_HSDPA_DL_FLO W_CONTROL_SWITC H:OFF, DRA_HSDPA_STATE_ TRANS_SWITCH:OFF, DRA_HSUPA_DCCC_S WITCH:ON, DRA_HSUPA_STATE_ TRANS_SWITCH:OFF, DRA_IU_QOS_RENEG _SWITCH:OFF, DRA_PS_BE_STATE_T RANS_SWITCH:ON, DRA_PS_NON_BE_ST ATE_TRANS_SWITCH: OFF, DRA_R99_DL_FLOW_ CONTROL_SWITCH:O FF, DRA_THROUGHPUT_ DCCC_SWITCH:OFF RNC
DRA_BE_RATE_DOWN_ BF_HO_SWITCH,DRA_T HROU_DCCC_SWITCH, DRA_BE_EDCH_TTI_RE CFG_SWITCH and DRA_HSUPA_DCCC_S WITCH are valid when DRA_DCCC_SWITCH is set to ON; For BE service,DRA_HSDPA_ST ATE_TRANS_SWITCH and DRA_HSUPA_STATE_T RANS_SWITCH are valid when DRA_PS_BE_STATE_TR ANS_SWITCH is set to ON; For RT service,DRA_HSDPA_ST ATE_TRANS_SWITCH and DRA_HSUPA_STATE_T RANS_SWITCH are valid when DRA_PS_NON_BE_STA TE_TRANS_SWITCH is set to ON; Read & Write
-18 Cell
None
-18 Cell
None
5000 RNC
None
5000 RNC
None
2 Cell
If this parameter is set through both the "ADD UCELLDRD" and "SET UDRD" commands, the parameter set through the "ADD UCELLDRD" command takes precedence over that set through the "SET UDRD" command. Read & Write
2 RNC
If this parameter is set through both the "ADD UCELLDRD" and "SET UDRD" commands, the parameter set through the "ADD UCELLDRD" command takes precedence over that set through the "SET UDRD" command. Read & Write
NO
RNC
IP:60; ATM:45
BSC6900
None
IP:60; ATM:45
BSC6900
None
IP:60; ATM:45
BSC6900
None
IP:60; ATM:80
BSC6900
None
80 BSC6900
None
80 BSC6900
None
None
D5
RNC
6 RNC
None
6 RNC
None
TRUE
RNC
ON
RNC
None
PPP link
None
None
MP link
None
ON
RNC
None
48 SCTP link
None
None
BSC6900
None
None
BSC6900
None
None
None
BSC6900
None
None
IP route
None
None
IP route
None
None
E1/T1 port
None
None
E1/T1 port
None
D5
RNC
D20
RNC
D32
RNC
None
D2
RNC
ON
RNC
None
20 RNC
This paramter is valid only when "DynCellShutDownSwitch " is set to ON. Read & Write
180 RNC
This paramter is valid only when "DynCellShutDownSwitch " is set to ON. Read & Write
OFF
RNC
None
None
Cell
None
CONDITIONALSHUTD OWN
Cell
This paramter is valid only when "DynShutdownSwitch" is set to ON_1 or ON_2 or ON_3. Read & Write
None
BSC6900
None
None
None
30 RNC
None
4 RNC
None
8 RNC
None
2 RNC
None
1 Cell
None
None
IP path
When the value of "PATHCHK" in "ADD IPPATH" is set to ENABLED, this parameter is valid. Read & Write
500 RNC
None
100 RNC
None
30000 RNC
If this parameter is set through both the "SET UFRC" and "ADD UCELLFRC" commands, the parameter set through the "ADD UCELLFRC" command takes precedence over that set through the "SET UFRC" command. Read & Write
30000 Cell
If this parameter is set through both the "SET UFRCCHLTYPEPARA" and "ADD UCELLFRC" commands, the parameter set through the "ADD UCELLFRC" command takes precedence over that set through the "SET UFRCCHLTYPEPARA" command. Read & Write
3000 RNC
None
5000 RNC
None
41 RNC
If this parameter is set through both the "SET UFRCCHLTYPEPARA" and "ADD UCELLFRC" commands, the parameter set through the "ADD UCELLFRC" command takes precedence over that set through the "SET UFRCCHLTYPEPARA" command. Read & Write
41 Cell
If this parameter is set through both the "SET UFRCCHLTYPEPARA" and "ADD UCELLFRC" commands, the parameter set through the "ADD UCELLFRC" command takes precedence over that set through the "SET UFRCCHLTYPEPARA" command. Read & Write
2147483646 BSC6900
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
336 RAB
This parameter is associated with the setting of the "EdchMacdPduSizeNum" parameter. It is required when the "EdchMacdPduSizeNum" parameter is set to a value within the range of D1 to D12. Read & Write
None
RAB
This parameter is associated with the setting of the "EdchMacdPduSizeNum" parameter. It is required when the "EdchMacdPduSizeNum" parameter is set to a value within the range of D10 to D12. Read & Write
None
RAB
This parameter is associated with the setting of the "EdchMacdPduSizeNum" parameter. It is required when the "EdchMacdPduSizeNum" parameter is set to D11 or D12. Read & Write
None
RAB
This parameter is associated with the setting of the "EdchMacdPduSizeNum" parameter. It is required when the "EdchMacdPduSizeNum" parameter is set to D12. Read & Write This parameter is associated with the setting of the "EdchMacdPduSizeNum" parameter. It is required when the "EdchMacdPduSizeNum" parameter is set to a value within the range of D2 to D12. Read & Write
None
RAB
None
RAB
This parameter is associated with the setting of the "EdchMacdPduSizeNum" parameter. It is required when the "EdchMacdPduSizeNum" parameter is set to a value within the range of D3 to D12. Read & Write This parameter is associated with the setting of the "EdchMacdPduSizeNum" parameter. It is required when the "EdchMacdPduSizeNum" parameter is set to a value within the range of D4 to D12. Read & Write This parameter is associated with the setting of the "EdchMacdPduSizeNum" parameter. It is required when the "EdchMacdPduSizeNum" parameter is set to a value within the range of D5 to D12. Read & Write This parameter is associated with the setting of the "EdchMacdPduSizeNum" parameter. It is required when the "EdchMacdPduSizeNum" parameter is set to a value within the range of D6 to D12. Read & Write
None
RAB
None
RAB
None
RAB
None
RAB
This parameter is associated with the setting of the "EdchMacdPduSizeNum" parameter. It is required when the "EdchMacdPduSizeNum" parameter is set to a value within the range of D7 to D12. Read & Write This parameter is associated with the setting of the "EdchMacdPduSizeNum" parameter. It is required when the "EdchMacdPduSizeNum" parameter is set to a value within the range of D8 to D12. Read & Write This parameter is associated with the setting of the "EdchMacdPduSizeNum" parameter. It is required when the "EdchMacdPduSizeNum" parameter is set to a value within the range of D9 to D12. Read & Write
None
RAB
None
RAB
D1
RAB
This parameter is required when the "TrchType" parameter is set to TRCH_EDCH_2MS or TRCH_EDCH_10MS but not required when the "TrchType" parameter is set to TRCH_HSDSCH. Read & Write
16 RAB
None
16 RAB
None
RATE_8KBPS: not selected RATE_16KBPS: not selected RATE_32KBPS: not selected RATE_64KBPS: not selected RATE_128KBPS: selected RATE_144KBPS: not selected RATE_256KBPS: selected RATE_384KBPS: not selected RATE_608KBPS: selected RATE_1440KBPS: not selected RATE_2048KBPS: not selected RATE_2880KBPS: not selected RATE_5740KBPS: not selected
RNC
None
None
RAB
This parameter is required when the "TrchType" parameter is set to TRCH_EDCH_2MS or TRCH_EDCH_10MS. Read & Write
None
RAB
1. EdchTargetLargeRetrans Num <= MaxEdchRetransNum. 2. EdchTargetLargeRetrans Num > EdchTargetLittleRetransN um. Read & Write
None
RAB
1. EdchTargetLittleRetransN um <= MaxEdchRetransNum. 2. EdchTargetLittleRetransN um < EdchTargetLargeRetrans Num Read & Write
2 RAB
None
2 RAB
None
None
RNC
None
20 BSC6900
None
10 Cell
None
None
Cell
None
None
RNC
None
FALSE
RNC
None
None
BSC6900
None
ON
RNC
None
OFF
MTP3 link
None
OFF
RNC
None
ERR_PFM_1E5
Board
None
None
BSC6900
None
None
BSC6900
None
AUTO
BSC6900
None
None
BSC6900
None
UEA0-1; UEA1-1
RNC
None
None
BSC6900
None
None
Cell
This paramter is valid only when "DynShutdownSwitch" is set to ON_1 or ON_2 or ON_3; The value of this parameter must fulfill the following condition: "StartTime1" < "EndTime1". Read & Write
None
Cell
This paramter is valid only when "DynShutdownSwitch" is set to ON_2 or ON_3; The value of this parameter must fulfill the following condition: "StartTime2" < "EndTime2". Read & Write This paramter is valid only when "DynShutdownSwitch" is set to ON_3; The value of this parameter must fulfill the following condition: "StartTime3" < "EndTime3". Read & Write
None
Cell
None
BSC6900
None
ENABLED
BSC6900
None
None
SCCP
None
None
SCCP
Negotiation with the peer network element is required. Read & Write
None
BSC6900
None
1 Cell
None
O5E4_R1E4
Board
None
OFF
Board
None
2147483646 BSC6900
None
None
None None
None
BSC6900
None
None
BSC6900
None
ONE_BY_ONE
BSC6900
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
D1024
RAB
The value of this parameter must be larger than the value of the "Event4bThd" parameter. Read & Write
None
RAB
The value of this parameter must be smaller than the value of the "Event4aThd" parameter.
50 RAB
This parameter is required when the "RlcMode" parameter is set to AM and the "AmRlcCfgPara" parameter is set to FLOWCONTROL_PARA. Read & Write
160 RAB
This parameter is required when the "RlcMode" parameter is set to AM and the "AmRlcCfgPara" parameter is set to FLOWCONTROL_PARA. Read & Write
80 RAB
This parameter is required when the "RlcMode" parameter is set to AM and the "AmRlcCfgPara" parameter is set to FLOWCONTROL_PARA. Read & Write
None
BSC6900
None
None
BSC6900
None
None
None
If "Sensor Type of External Analog 1" is set to VOLTAGE, the unit of "Upper Limit of Signal Output of External Analog 1" is V; if "Sensor Type of External Analog 1" is set to CURRENT, the unit of "Upper Limit of Signal Output of External Analog 1" is A. Read & Write
None
None
If "Sensor Type of External Analog 1" is set to VOLTAGE, the unit of "Lower Limit of Signal Output of External Analog 1" is V; if "Sensor Type of External Analog 1" is set to CURRENT, the unit of "Lower Limit of Signal Output of External Analog 1" is A. Read & Write
None
None
None
None
None
If "Sensor Type of External Analog 1" is set to VOLTAGE, the unit of "Upper Limit of Measurement Range of External Analog 1" is V; if "Sensor Type of External Analog 1" is set to CURRENT, the unit of "Upper Limit of Measurement Range of External Analog 1" is A. Read & Write
None
None
If "Sensor Type of External Analog 1" is set to VOLTAGE, the unit of "Lower Limit of Measurement Range of External Analog 1" is V; if "Sensor Type of External Analog 1" is set to CURRENT, the unit of "Lower Limit of Measurement Range of External Analog 1" is A. Read & Write
None
None
If "Sensor Type of External Analog 2" is set to VOLTAGE, the unit of "Upper Limit of Signal Output of External Analog 2" is V; if "Sensor Type of External Analog 2" is set to CURRENT, the unit of "Upper Limit of Signal Output of External Analog 2" is A. Read & Write
None
None
If "Sensor Type of External Analog 2" is set to VOLTAGE, the unit of "Lower Limit of Signal Output of External Analog 2" is V; if "Sensor Type of External Analog 2" is set to CURRENT, the unit of "Lower Limit of Signal Output of External Analog 2" is A. Read & Write
None
None
None
None
None
If "Sensor Type of External Analog 2" is set to VOLTAGE, the unit of "Upper Limit of Measurement Range of External Analog 2" is V; if "Sensor Type of External Analog 2" is set to CURRENT, the unit of "Upper Limit of Measurement Range of External Analog 2" is A. Read & Write
None
None
If "Sensor Type of External Analog 2" is set to VOLTAGE, the unit of "Lower Limit of Measurement Range of External Analog 2" is V; if "Sensor Type of External Analog 2" is set to CURRENT, the unit of "Lower Limit of Measurement Range of External Analog 2" is A. Read & Write
None
None
If "Sensor Type of External Analog 3" is set to VOLTAGE, the unit of "Upper Limit of Signal Output of External Analog 3" is V; if "Sensor Type of External Analog 3" is set to CURRENT, the unit of "Upper Limit of Signal Output of External Analog 3" is A. Read & Write
None
None
If "Sensor Type of External Analog 3" is set to VOLTAGE, the unit of "Lower Limit of Signal Output of External Analog 3" is V; if "Sensor Type of External Analog 3" is set to CURRENT, the unit of "Lower Limit of Signal Output of External Analog 3" is A. Read & Write
None
None
None
None
None
If "Sensor Type of External Analog 3" is set to VOLTAGE, the unit of "Upper Limit of Measurement Range of External Analog 3" is V; if "Sensor Type of External Analog 3" is set to CURRENT, the unit of "Upper Limit of Measurement Range of External Analog 3" is A. Read & Write
None
None
If "Sensor Type of External Analog 3" is set to VOLTAGE, the unit of "Lower Limit of Measurement Range of External Analog 3" is V; if "Sensor Type of External Analog 3" is set to CURRENT, the unit of "Lower Limit of Measurement Range of External Analog 3" is A. Read & Write
None
None
If "Sensor Type of External Analog 4" is set to VOLTAGE, the unit of "Upper Limit of Signal Output of External Analog 4" is V; if "Sensor Type of External Analog 4" is set to CURRENT, the unit of "Upper Limit of Signal Output of External Analog 4" is A. Read & Write
None
None
If "Sensor Type of External Analog 4" is set to VOLTAGE, the unit of "Lower Limit of Signal Output of External Analog 4" is V; if "Sensor Type of External Analog 4" is set to CURRENT, the unit of "Lower Limit of Signal Output of External Analog 4" is A. Read & Write
None
None
None
None
None
If "Sensor Type of External Analog 4" is set to VOLTAGE, the unit of "Upper Limit of Measurement Range of External Analog 4" is V; if "Sensor Type of External Analog 4" is set to CURRENT, the unit of "Upper Limit of Measurement Range of External Analog 4" is A. Read & Write
None
None
If "Sensor Type of External Analog 4" is set to VOLTAGE, the unit of "Lower Limit of Measurement Range of External Analog 4" is V; if "Sensor Type of External Analog 4" is set to CURRENT, the unit of "Lower Limit of Measurement Range of External Analog 4" is A. Read & Write
D16000
RNC
None
D5000
RNC
None
None
Physical channel
None
None
Cell
This parameter is consistent with "TrchId" in "ADD UFACH", "ADD UFACHDYNTFS", and "ADD UFACHLOCH". Read & Write
10 Cell
None
None
RNC
None
-30 RNC
None
REQUIRE
Cell
This parameter is required when the "InterFreqInterRatMeasIn d" parameter is set to INTER_FREQ, INTER_RAT or INTER_FREQ_AND_INT ER_RAT. This parameter is not required when the "InterFreqInterRatMeasIn d" parameter is set to NOT_REQUIRE. Read & Write
0 Cell
None
None
RNC
None
None
BSC6900
None
4 RNC
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
None
None
None
SOFTWARE_CONTRO L BSC6900
None
None
None
None
None
RNC
None
D3k
RNC
The following relationship must be satisfied: "D2F2PTvmThd" < "FastDormancyF2DHTvm Thd"; "RtDH2FTvmThd" < "FastDormancyF2DHTvm Thd"; "BeH2FTvmThd" < "FastDormancyF2DHTvm Thd". Read & Write
None
1 IMA group
None
None
UNI link
None
None
Board
None
None
0 PPP link
None
0 MP group
None
None
This index can correspond with any threshold (maximum value of 80) in the six queues. The following condition must be met: threshold x 64 x 1024 x logical port bandwidth < 4294967295(0xFFFFFFF 0 IP logical port F). Read & Write
None
BSC6900
None
16bit
PPP link
None
16bit
MP link
None
None
None
None
STEPSIZE_1DB
RNC
None
None
Cell
None
None
Cell
This paramter is valid only when "TxDiversityInd" is set to TRUE. Read & Write
None
Cell
None
None
Cell
This paramter is valid only when "TxDiversityInd" is set to TRUE. Read & Write
-30 RNC
None
-200 RNC
None
12 RNC
None
4 None
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
csv
BSC6900
None
D3
RNC
None
D3
Cell
None
None
BSC6900
None
D32
NodeB
This parameter is required when the "IsFixedMachsWinSize" parameter is set to TRUE. Read & Write
ON
Cell
None
ON ON
ON
UNI link
None
OFF ON
Board
None
ON
PPP link
None
ON
MP group
None
ON
None
ON
ON
None
None
None
None None
BSC6900 BSC6900
None None
None
BSC6900
None
none
BSC6900
None
OFF
RNC
None
2 None
None
None
MP group
None
None
BSC6900
None
None
None
BSC6900
None
None
BSC6900
None
D128
IMA group
None
TXT
BSC6900
None
None
None
The factor table index is configured by setting the value of "FTI" in "ADD FACTORTABLE".
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
None None
BSC6900 BSC6900
None None
0 BSC6900
None
0 BSC6900
None
20 BSC6900
None
15 BSC6900
None
0 BSC6900
None
1 BSC6900
None
0 BSC6900
None
0 BSC6900
None
5 BSC6900
None
0 BSC6900
None
None
Physical channel
Physical 15 channel
DEG
None
None
DEG
Cell
None
70 BSC6900
None
70 BSC6900
None
None
BSC6900
None
NBAMR_BITRATE_12.2 0K Cell
The following relationship must be satisfied: "GoldMaxMode" >= "SilverMaxMode" >= "CopperMaxMode". Read & Write
The following relationship must be satisfied: "GoldMaxMode" >= "SilverMaxMode" >= "CopperMaxMode". Read & Write
OFF
Cell
None
10 None
None
None
None
None
Cell
None
None
Cell
None
None
95 Board
None
75 Board
None
85 Board
None
65 Board
None
ON
Board
None
512 RNC
None
0 RNC
None
Mode0
Cell
None
D50
RAB
This parameter is required when the "TrchType" parameter is set to TRCH_EDCH_2MS or TRCH_EDCH_10MS but not required when the "TrchType" parameter is set to TRCH_HSDSCH. Read & Write
None
None
BSC6900
None
5 Cell
None
0 Cell
This paramter is valid only when "UseOfHcs" is set to TRUE. Read & Write
0 Cell
This parameter is required when the "UseOfHcs" parameter is set to USED but not required when the "UseOfHcs" parameter is set to NOT_USED. Read & Write
100 BSC6900
None
When the interface type is Iub, transmission type is ATM, the parameter is UBR; transmission type is dual stack or IP, the parameter is AF13; transmission type is dual stack or Hybrid IP, the parameter is LQAF13. When the interface type is Iur, transmission type is ATM, the parameter is UBR; transmission type is IP, the parameter is AF13. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
30 BSC6900
None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transmission type is dual stack, the parameter is UBR; transmission type is Hybrid IP, the parameter is AF13. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
100 BSC6900
None
70 BSC6900
None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transmission type is IP or Hybrid IP, the parameter is AF43. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transmission type is IP, the parameter is AF43. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
100 BSC6900
None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transmission type is dual stack, the parameter is AF43; transmission type is Hybrid IP, the parameter is LQAF43. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
0 BSC6900
None
30 BSC6900
None
100 BSC6900
None
100 BSC6900
None
When the interface type is Iub, transmission type is ATM, the parameter is UBR; transmission type is dual stack or IP, the parameter is AF13; transmission type is dual stack or Hybrid IP, the parameter is LQAF13. When the interface type is Iur, transmission type is ATM, the parameter is UBR; transmission type is IP, the parameter is AF13. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transmission type is dual stack, the parameter is UBR; transmission type is Hybrid IP, the parameter is AF13. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
When the interface type is Iub, transmission type is ATM, the parameter is UBR; transmission type is dual stack or IP, the parameter is AF13; transmission type is dual stack or Hybrid IP, the parameter is LQAF13. When the interface type is Iur, transmission type is ATM, the parameter is UBR; transmission type is IP, the parameter is AF13. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transmission type is dual stack, the parameter is UBR; transmission type is Hybrid IP, the parameter is AF13. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
When the interface type is Iub, transmission type is ATM, the parameter is UBR; transmission type is dual stack or IP, the parameter is AF13; transmission type is dual stack or Hybrid IP, the parameter is LQAF13. When the interface type is Iur, transmission type is ATM, the parameter is UBR; transmission type is IP, the parameter is AF13. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transmission type is dual stack, the parameter is UBR; transmission type is Hybrid IP, the parameter is AF13. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
30 BSC6900
None
100 BSC6900
None
30 BSC6900
None
100 BSC6900
None
15 BSC6900
None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transmission type is IP or Hybrid IP, the parameter is EF. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transmission type is IP, the parameter is EF. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
100 BSC6900
None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transmission type is dual stack, the parameter is EF; transmission type is Hybrid IP, the parameter is LQEF. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
0 BSC6900
None
50 BSC6900
None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transmission type is IP or Hybrid IP, the parameter is EF. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transmission type is IP, the parameter is EF. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
100 BSC6900
None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transmission type is dual stack, the parameter is EF; transmission type is Hybrid IP, the parameter is LQEF. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
0 BSC6900
None
100 BSC6900
None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transmission type is IP or Hybrid IP, the parameter is AF43. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transmission type is IP, the parameter is AF43. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
100 BSC6900
None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transmission type is dual stack, the parameter is AF43; transmission type is Hybrid IP, the parameter is LQAF43. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
0 BSC6900
None
Adjacent 70 node
None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transmission type is IP or Hybrid IP, the parameter is AF43. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transmission type is IP, the parameter is AF43. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transmission type is dual stack, the parameter is AF43; transmission type is Hybrid IP, the parameter is LQAF43. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
None
BSC6900
None
None
RNC
None
None
RNC
None
None
BSC6900
None
None
BSC6900
None
5000 RNC
None
5000 RNC
None
2 Cell
None
5000 RNC
None
5000 RNC
None
5000 RNC
None
SingleHost
NodeB
None
HO_ALGO_HCS_SPEE D_EST_SWITCH:OFF, HO_ALGO_LDR_ALLO W_SHO_SWITCH:ON, HO_ALGO_MBMS_FLC _SWITCH:OFF, HO_ALGO_OVERLAY_ SWITCH:OFF, HO_INTER_FREQ_HA RD_HO_SWITCH:OFF, HO_INTER_FREQ_RP RT_2D2F_SWITCH:ON, HO_INTER_RAT_CS_O UT_SWITCH:ON, HO_INTER_RAT_PS_3 G2G_CELLCHG_NACC _SWITCH:OFF, HO_INTER_RAT_PS_3 G2G_RELOCATION_S WITCH:OFF, HO_INTER_RAT_PS_O UT_SWITCH:ON, HO_INTER_RAT_RNC_ SERVICE_HO_SWITCH :OFF, HO_INTRA_FREQ_DET SET_INTO_ACTSET_S WITCH:ON, HO_INTRA_FREQ_DET SET_RPRT_SWITCH:O N, HO_INTRA_FREQ_HA RD_HO_SWITCH:ON, HO_INTRA_FREQ_RP RT_1J_SWITCH:OFF, RNC
None
-16 Cell
None
-92 Cell
None
5000 RNC
None
None
BSC6900
None
100 RNC
This parameter is valid only when "AFSetObj" is set to GOLD, SILVER, or COPPER. Read & Write
30 Cell
None
TRUE
RNC
None
50 RNC
This parameter is valid only when "AFSetObj" is set to GOLD, SILVER, or COPPER. Read & Write
100 RNC
This parameter is valid only when "AFSetObj" is set to GOLD, SILVER, or COPPER. Read & Write
5 RNC
None
5 RNC
None
100 RNC
None
60 RNC
None
100 RNC
This parameter is valid only when "AFSetObj" is set to GOLD, SILVER, or COPPER. Read & Write
70 Cell
None
None
BSC6900
None
0 Cell
This paramter is valid only when "DynShutDownType" is set to ConditionalShutDown. Read & Write
336 RAB
This parameter is associated with the setting of the "HsdschMacdPduSizeNu m" parameter. It is required when the "HsdschMacdPduSizeNu m" parameter is set to a value within the range of D1 to D8. Read & Write
None
RAB
This parameter is associated with the setting of the "HsdschMacdPduSizeNu m" parameter. It is required when the "HsdschMacdPduSizeNu m" parameter is set to a value within the range of D2 to D8. Read & Write
None
RAB
This parameter is associated with the setting of the "HsdschMacdPduSizeNu m" parameter. It is required when the "HsdschMacdPduSizeNu m" parameter is set to a value within the range of D3 to D8. Read & Write
None
RAB
This parameter is associated with the setting of the "HsdschMacdPduSizeNu m" parameter. It is required when the "HsdschMacdPduSizeNu m" parameter is set to a value within the range of D4 to D8. Read & Write
None
RAB
This parameter is associated with the setting of the "HsdschMacdPduSizeNu m" parameter. It is required when the "HsdschMacdPduSizeNu m" parameter is set to a value within the range of D5 to D8. Read & Write
None
RAB
This parameter is associated with the setting of the "HsdschMacdPduSizeNu m" parameter. It is required when the "HsdschMacdPduSizeNu m" parameter is set to a value within the range of D6 to D8. Read & Write
None
RAB
This parameter is associated with the setting of the "HsdschMacdPduSizeNu m" parameter. It is required when the "HsdschMacdPduSizeNu m" parameter is set to D7 or D8. Read & Write
None
RAB
This parameter is associated with the setting of the "HsdschMacdPduSizeNu m" parameter. It is required when the "HsdschMacdPduSizeNu m" parameter is set to D8. Read & Write
D1
RAB
This parameter is required when the "TrchType" parameter is set to TRCH_HSDSCH but not required when the "TrchType" parameter is set to TRCH_EDCH_2MS or TRCH_EDCH_10MS. Read & Write
None
BSC6900
None
E_F_DPCH_OFF
Cell
None
MIMO
RNC
None
None
Cell
None
0 Cell
None
0 RNC
None
None
RNC
This parameter is listed when the value of "TbNum" is D1, D2, D3, or D4.
None
RNC
This parameter is listed when the value of "TbNum" is D2, D3, or D4.
None
RNC
None
RNC
5 Cell
This paramter is valid only when "AllocCodeMode" is set to Manual. Read & Write
5 Cell
This paramter is valid only when "AllocCodeMode" is set to Automatic and the value of this parameter must satisfy the following relationship: "HsPdschMaxCodeNum" >= "HsPdschMinCodeNum". Read & Write
1 Cell
This paramter is valid only when "AllocCodeMode" is set to Automatic and the value of this parameter must satisfy the following relationship: "HsPdschMaxCodeNum" >= "HsPdschMinCodeNum". Read & Write
2.5dB
Cell
None
None
Cell
This paramter is valid only when "TxDiversityInd" is set to TRUE. Read & Write
None
Cell
This paramter is valid only when "TxDiversityInd" is set to TRUE. Read & Write
None
BSC6900
None
4 Cell
None
D100
RNC
None
D50
RNC
None
D100
RNC
None
D50
RNC
None
100 RNC
D5760
RNC
None
MBR
NodeB
None
BasedOnUECap
RNC
None
50 RNC
This parameter is valid only when "AFSetObj" is set to GOLD, SILVER, or COPPER. Read & Write
RATE_UP_AND_DOW N_ON_EDCH
RNC
None
100 Cell
None
100 Cell
None
D256
RNC
This parameter can be used for selection of the initial rate for HSUPA BE services only when the DCCC_SWITCH under the "Chswitch" parameter and the HSUPA_DCCC_SWITCH under the "HspaSwitch" parameter are set to on through the "SET CORRMALGOSWITCH" command. Read & Write
100 RNC
This parameter is valid only when "AFSetObj" is set to GOLD, SILVER, or COPPER. Read & Write
100 Cell
None
5 RNC
None
100 RNC
None
60 RNC
None
100 RNC
This parameter is valid only when "AFSetObj" is set to GOLD, SILVER, or COPPER. Read & Write
None
BSC6900
None
50 Cell
The value of this parameter must satisfy the following relationship: "HsupAuRetrnsLdTrigThd " >= "HsupAuRetrnsLdRelThd" Read & Write
70 Cell
The value of this parameter must satisfy the following relationship: "HsupAuRetrnsLdTrigThd " >= "HsupAuRetrnsLdRelThd" Read & Write
0 Cell
This paramter is valid only when "DynShutDownType" is set to ConditionalShutDown. Read & Write
When the interface type is Iub, transmission type is ATM, the parameter is UBR; transmission type is dual stack or IP, the parameter is AF13; transmission type is dual stack or Hybrid IP, the parameter is LQAF13. When the interface type is Iur, transmission type is ATM, the parameter is UBR; transmission type is IP, the parameter is AF13. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
30 BSC6900
None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transmission type is dual stack, the parameter is UBR; transmission type is Hybrid IP, the parameter is AF13. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
100 BSC6900
None
100 BSC6900
None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transmission type is IP or Hybrid IP, the parameter is AF43. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transmission type is IP, the parameter is AF43. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
100 BSC6900
None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transmission type is dual stack, the parameter is AF43; transmission type is Hybrid IP, the parameter is LQAF43. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
0 BSC6900
None
70 BSC6900
None
30 BSC6900
None
100 BSC6900
None
100 BSC6900
None
When the interface type is Iub, transmission type is ATM, the parameter is UBR; transmission type is dual stack or IP, the parameter is AF13; transmission type is dual stack or Hybrid IP, the parameter is LQAF13. When the interface type is Iur, transmission type is ATM, the parameter is UBR; transmission type is IP, the parameter is AF13. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transmission type is dual stack, the parameter is UBR; transmission type is Hybrid IP, the parameter is AF13. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
When the interface type is Iub, transmission type is ATM, the parameter is UBR; transmission type is dual stack or IP, the parameter is AF13; transmission type is dual stack or Hybrid IP, the parameter is LQAF13. When the interface type is Iur, transmission type is ATM, the parameter is UBR; transmission type is IP, the parameter is AF13. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transmission type is dual stack, the parameter is UBR; transmission type is Hybrid IP, the parameter is AF13. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
When the interface type is Iub, transmission type is ATM, the parameter is UBR; transmission type is dual stack or IP, the parameter is AF13; transmission type is dual stack or Hybrid IP, the parameter is LQAF13. When the interface type is Iur, transmission type is ATM, the parameter is UBR; transmission type is IP, the parameter is AF13. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transmission type is dual stack, the parameter is UBR; transmission type is Hybrid IP, the parameter is AF13. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
30 BSC6900
None
None None
None
Board
None
None
Board
None
30 BSC6900
None
100 BSC6900
None
None
BSC6900
None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transmission type is IP or Hybrid IP, the parameter is EF. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transmission type is IP, the parameter is EF. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
100 BSC6900
None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transmission type is dual stack, the parameter is EF; transmission type is Hybrid IP, the parameter is LQEF. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
0 BSC6900
None
15 BSC6900
None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transmission type is IP or Hybrid IP, the parameter is EF. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transmission type is IP, the parameter is EF. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
100 BSC6900
None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transmission type is dual stack, the parameter is EF; transmission type is Hybrid IP, the parameter is LQEF. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
0 BSC6900
None
50 BSC6900
None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transmission type is IP or Hybrid IP, the parameter is AF43. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transmission type is IP, the parameter is AF43. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
100 BSC6900
None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transmission type is dual stack, the parameter is AF43; transmission type is Hybrid IP, the parameter is LQAF43. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
0 BSC6900
None
100 BSC6900
None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transmission type is IP or Hybrid IP, the parameter is AF43. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transmission type is IP, the parameter is AF43. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transmission type is dual stack, the parameter is AF43; transmission type is Hybrid IP, the parameter is LQAF43. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
70 BSC6900
None
None
BSC6900
None
None
BSC6900
None
0 Cell
None
0 Cell
None
8 Cell
None
8 Cell
None
8 Cell
None
8 Cell
None
4 Cell
This parameter is valid when "InterFreqReportMode" is set to EVENT_TRIGGER. Read & Write
6 Cell
None
4 Cell
None
4 Cell
None
4 Cell
None
4 Cell
None
4 Cell
This parameter is valid when "InterRatReportMode" is set to EVENT_TRIGGER. Read & Write
0 Cell
None
0 Cell
This parameter is valid when "InterRatReportMode" is set to PERIODICAL_REPORTI NG. Read & Write
0 Cell
This parameter is valid when "InterFreqReportMode" is set to PERIODICAL_REPORTI NG. Read & Write
720 SCCP
None
90 SCCP
None
64 IP path
When the value of "PATHCHK" in "ADD IPPATH" is set to ENABLED, this parameter is valid. Read & Write
None
BSC6900
None
None
BSC6900
None
None
Cell
None
ALLOWED
Cell
2 Cell
None
1 Cell
0 Cell
This parameter is valid when "SIB11Ind" is set to TRUE. Read & Write
0 Cell
This parameter is valid when "SIB11Ind" is set to TRUE. Read & Write
4 Cell
None
5 Cell
None
D320
Cell
15000(UNI), 500(NNI)
SAAL link
None
30 RNC
None
20000 RNC
None
None
None
None
None
IMA group
None
None
IMA group
None
None
IMA link
None
V1.1
IMA group
None
OFF
RNC
None
DCH
RNC
None
32 Cell
This parameter must satisfy the following relationship: "IMSMBR" >= "IMSGBR" The parameter must be greater than or equal to "ImsiMin" in "ADD UIMSISNAMAP". The parameter must be less than or equal to "ImsiMax" in "ADD UIMSISNAMAP".
None
RNC
None
RNC
D32
RNC
This parameter is required when the "ImsBearEnhancedSwitch " parameter is set to ON. Read & Write
None
RNC
This parameter must be less than or equal to "ImsiRtMax" in "ADD UIMSIIDNNSCNIDMAP". Read & Write
None
RNC
This parameter must be greater than or equal to "ImsiRtMin" in "ADD UIMSIIDNNSCNIDMAP". Read & Write
512 Cell
This parameter must satisfy the following relationship: "IMSMBR" >= "IMSGBR"
None
RNC
D4
RNC
None None
RNC Board
UIA1-1
RNC
None
32 Cell
This parameter must satisfy the following relationship: "INTERACTMBR" >= "INTERACTGBR"
512 Cell CSAMR_INTERFREQ:O FF, CSNONAMR_INTERFR EQ:OFF, PSR99_INTERFREQ:O FF, PSHSPA_INTERFREQ: OFF Cell
This parameter must satisfy the following relationship: "INTERACTMBR" >= "INTERACTGBR"
This parameter is valid when "InterRatReportMode" is set to EVENT_TRIGGER. Read & Write
-16 Cell
None
-14 Cell
The value of this parameter must be smaller than "InterFreqCsThd2FEcN0". Read & Write
-95 Cell
The value of this parameter must be smaller than "InterFreqCsThd2FRscp". Read & Write
-12 Cell
The value of this parameter must be larger than "InterFreqCsThd2DEcN0" . Read & Write
-92 Cell
The value of this parameter must be larger than "InterFreqCsThd2DRscp". Read & Write
80 Cell
This parameter is valid when "InterRatReportMode" is set to EVENT_TRIGGER. Read & Write
For low speed(5km/h):Range is D4~D6, the recommended value is D5; for middle speed(50km/h):Range is D3~D4, the recommended value is D4; for high speed(120km/h):Range is D2~D4, the recommended value is D2; universal value:Range is D3~D6, the recommended value is D3. Cell
None
INTER_FREQ_COV
Cell
None
-14 Cell
This parameter is valid when the OVERLAY_SWITCH is ON. The OVERLAY_SWITCH is in "HoSwitch" in "SET CORRMALGOSWITCH"; Also the value of this parameter must be smaller than "InterFreqHThd2FEcN0". Read & Write
-95 Cell
This parameter is valid when the OVERLAY_SWITCH is ON. The OVERLAY_SWITCH is in "HoSwitch" in "SET CORRMALGOSWITCH"; Also the value of this parameter must be smaller than "InterFreqHThd2FRscp". Read & Write
-12 Cell
This parameter is valid when the OVERLAY_SWITCH is ON. The OVERLAY_SWITCH is in "HoSwitch" in "SET CORRMALGOSWITCH". Also the value of this parameter must be larger than "InterFreqHThd2DEcN0". Read & Write
-92 Cell
This parameter is valid when the OVERLAY_SWITCH is ON. The OVERLAY_SWITCH is in "HoSwitch" in "SET CORRMALGOSWITCH"; Also the value of this parameter must be larger than "InterFreqHThd2DRscp". Read & Write
None
CPICH_EC/NO
Cell
This parameter is valid when "InterRatReportMode" is set to EVENT_TRIGGER. Read & Write
60 Cell
None
3 Cell
None
OFF
Subsystem
None
-16 RNC
None
-14 Cell
The value of this parameter must be smaller than "InterFreqR99PsThd2FEc N0". Read & Write
-95 Cell
The value of this parameter must be smaller than "InterFreqR99PsThd2FRs cp". Read & Write
-12 Cell
The value of this parameter must be larger than "InterFreqR99PsThd2DEc N0". Read & Write
-92 Cell
The value of this parameter must be larger than "InterFreqR99PsThd2DR scp". Read & Write
SIMINTERFREQRAT
Cell
None
None
EVENT_TRIGGER
Cell
This parameter is valid when "InterRatReportMode" is set to EVENT_TRIGGER. Read & Write
255 Cell
None
80 Cell
This parameter is valid when "InterRatReportMode" is set to EVENT_TRIGGER. Read & Write
YES
RNC
None
YES
RNC
None
CSAMR_INTERRAT:OF F Cell
This parameter is valid when "InterRatReportMode" is set to EVENT_TRIGGER. Read & Write
-14 Cell
The value of this parameter must be smaller than "InterRatCsThd2FEcN0". Read & Write
-100 Cell
-12 Cell
The value of this parameter must be larger than "InterRatCsThd2DEcN0". Read & Write
-97 Cell
The value of this parameter must be larger than "InterRatCsThd2DRscp". Read & Write
80 Cell
This parameter is valid when "InterRatReportMode" is set to EVENT_TRIGGER. Read & Write
D3
Cell
None
16 Cell
None
YES
RNC
None
21 Cell
None
DRD
RNC
None
-15 Cell
This parameter is valid when the OVERLAY_SWITCH is ON. The OVERLAY_SWITCH is in "HoSwitch" in "SET CORRMALGOSWITCH"; Also the value of this parameter must be smaller than "InterRatHThd2FEcN0". Read & Write
-110 Cell
This parameter is valid when the OVERLAY_SWITCH is ON. The OVERLAY_SWITCH is in "HoSwitch" in "SET CORRMALGOSWITCH"; Also the value of this parameter must be smaller than "InterRatHThd2FRscp". Read & Write
-13 Cell
This parameter is valid when the OVERLAY_SWITCH is ON. The OVERLAY_SWITCH is in "HoSwitch" in "SET CORRMALGOSWITCH"; Also the value of this parameter must be larger than "InterRatHThd2DEcN0". Read & Write
-107 Cell
This parameter is valid when the OVERLAY_SWITCH is ON. The OVERLAY_SWITCH is in "HoSwitch" in "SET CORRMALGOSWITCH"; Also the value of this parameter must be larger than "InterRatHThd2DRscp". Read & Write
60 Cell
None
3 Cell
None
OFF
Subsystem
None
21 Cell
None
21 Cell
None
D1000
Cell
This parameter is valid when "InterRatReportMode" is set to PERIODICAL_REPORTI NG. Read & Write
3 Cell
None
0 Cell
None
0 Cell
None
-15 Cell
-110 Cell
The value of this parameter must be smaller than "InterRatR99PsThd2FRsc p". Read & Write
-13 Cell
The value of this parameter must be larger than "InterRatR99PsThd2DEc N0". Read & Write
-107 Cell
The value of this parameter must be larger than "InterRatR99PsThd2DRs cp". Read & Write
None
EVENT_TRIGGER
Cell
None
255 Cell
None
80 Cell
This parameter is valid when "InterRatReportMode" is set to EVENT_TRIGGER. Read & Write
72 BSC6900
None
1 BSC6900
None
-24 Cell
None
-115 Cell
None
D3
Cell
None
1800 RNC
When "ChoiceRprtUnitForDlBasi cMeas" is set to MIN,the value of this parameter must satisfy the following relationship: "IntraFreqLdbPeriodTimer Len" > 2 x 60 x "MinForDlBasicMeas"; When "ChoiceRprtUnitForDlBasi cMeas" is set to TEN_MSEC,the value of this parameter must satisfy the following relationship: "IntraFreqLdbPeriodTimer Len" x 1000 > 2 x "TenMsecForDlBasicMea s". Read & Write
REQUIRE
Cell
None
CPICH_EC/NO
Cell
None
OFF
Subsystem
None
None
RNC
None
12 RNC
None
6 Cell
The value of this parameter must satisfy the following relationship: ("IntraRelThdFor1ACSNV P" - "Hystfor1A" / 2) < ("IntraRelThdFor1BCSNV P" + "Hystfor1B" / 2). Read & Write
6 Cell
The value of this parameter must satisfy the following relationship: ("IntraRelThdFor1ACSVP " - "Hystfor1A" / 2) < ("IntraRelThdFor1BCSVP " + "Hystfor1B" / 2). Read & Write
6 Cell
The value of this parameter must satisfy the following relationship: ("IntraRelThdFor1APS" "Hystfor1A" / 2) < ("IntraRelThdFor1BPS" + "Hystfor1B" / 2). Read & Write
18 RNC
None
12 Cell
The value of this parameter must satisfy the following relationship: ("IntraRelThdFor1ACSNV P" - "Hystfor1A" / 2) < ("IntraRelThdFor1BCSNV P" + "Hystfor1B" / 2). Read & Write
12 Cell
The value of this parameter must satisfy the following relationship: ("IntraRelThdFor1ACSVP " - "Hystfor1A" / 2) < ("IntraRelThdFor1BCSVP " + "Hystfor1B" / 2). Read & Write
12 Cell
The value of this parameter must satisfy the following relationship: ("IntraRelThdFor1APS" "Hystfor1A" / 2) < ("IntraRelThdFor1BPS" + "Hystfor1B" / 2). Read & Write
60000 RNC
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
None
IP path
The "IPADDR" in "ADD IPPATH" can not be at one network segment with the peer IP address of SCTPLNK or IPPATH whose local IP address is device IP address of FG2/GOU in this subrack;"IPADDR" and "PEERIPADDR" in "ADD IPPATH" must be at one network segment;("IPADDR","PEE RIPADDR","PEERMASK" in "ADD IPPATH") conflicts with other IPPATH whose type is IUPS. Read & Write
None
IPoA PVC
None
None
BSC6900
None
None
BSC6900
None
None
None
None
BSC6900
None
None
None
None
None
UDP/IP_HC
PPP link
None
UDP/IP_HC
MP group
None
None
None
None
BSC6900
None
None
BSC6900
None
None
None
None
None
None
None
None
BSC6900
None
None
NodeB
The parameter should be configured when "TnlBearerType" is modified from ATM to IP or dual stack ATM/IP. Read & Write
NOT_BARRED
Cell
None
NOT_BARRED
Cell
None
NOT_BARRED
Cell
None
NOT_BARRED
Cell
None
NOT_BARRED
Cell
None
NOT_BARRED
Cell
None
NOT_BARRED
Cell
None
NOT_BARRED
Cell
None
NOT_BARRED
Cell
None
NOT_BARRED
Cell
None
NOT_BARRED
Cell
None
NOT_BARRED
Cell
None
NOT_BARRED
Cell
None
NOT_BARRED
Cell
None
NOT_BARRED
Cell
None
NOT_BARRED
Cell
None
None
FALSE
NodeB
None
YES
BSC6900
None
None
IP Path
None
None
Adjacent node
When the value of "NODET" in "ADD ADJNODE" is set to IUB, IUR, or IUCS, and the value of "TRANST" in "ADD ADJNODE" is set to ATM or ATM_IP, this parameter is valid. Read & Write
None
None
None
None
BSC6900
None
1 RNC
None
1 NodeB
None
1 NodeB
None
300 RNC
None
70 Board
None
ON
Board
None
300 RNC
None
OFF
RNC
None
95 Board
None
75 Board
None
85 Board
None
65 Board
None
ON
Board
None
TRUE
RNC
None
60 Board
None
75 Board
None
50 Board
None
65 Board
None
ON
Board
None
OFF
RNC
None
OFF
RNC
None
95 Board
None
75 Board
None
85 Board
None
65 Board
None
ON
Board
None
IUCS_IUPS
RNC
None
Character_String
None
None
Character_String
None
None
16byte
Board
None
SBS 155
Board
None
Character_String
None
None
16byte
Board
None
SBS 155
Board
None
16byte
Board
None
Character_String
None
None
Character_String
None
None
16byte
Board
None
SBS 155
Board
None
Character_String
None
None
16byte
Board
None
SBS 155
Board
None
16byte
Board
None
OFF
None
None
None
None
None
None
None
None
None
None
None
SPACE
Board
None
None
None
2 PPP link
None
2000(UNI), 100(NNI)
SAAL link
None
D6
RNC
None
ON
RNC
None
None
RNC
None
None
None
None
None
None
None
None
None
BSC6900
None
6 RNC
None
UserNumber
Cell
If this parameter is set through both the "ADD UCELLDRD" and "SET UDRD" commands, the parameter set through the "ADD UCELLDRD" command takes precedence over that set through the "SET UDRD" command. Read & Write
UserNumber
RNC
None
35 Cell
If this parameter is set through both the "ADD UCELLDRD" and "SET UDRD" commands, the parameter set through the "ADD UCELLDRD" command takes precedence over that set through the "SET UDRD" command; This parameter is valid only when the "LdbDRDSwitchDCH" parameter is set to ON. Read & Write
35 RNC
This parameter is valid only when the "LdbDRDSwitchDCH" parameter is set to ON.
100 Cell
If this parameter is set through both the "ADD UCELLDRD" and "SET UDRD" commands, the parameter set through the "ADD UCELLDRD" command takes precedence over that set through the "SET UDRD" command; This parameter is valid only when the "LdbDRDSwitchHSDPA" parameter is set to ON. Read & Write
100 RNC
This parameter is valid only when the "LdbDRDSwitchHSDPA" parameter is set to ON.
10 RNC
This parameter is valid only when the "LdbDRDLoadRemainThd DCH" parameter is set to ON. Read & Write
10 RNC
This parameter is valid only when the "LdbDRDSwitchHSDPA" parameter is set to ON.
OFF
Cell
If this parameter is set through both the "ADD UCELLDRD" and "SET UDRD" commands, the parameter set through the "ADD UCELLDRD" command takes precedence over that set through the "SET UDRD" command. Read & Write
OFF
RNC
If this parameter is set through both the "ADD UCELLDRD" and "SET UDRD" commands, the parameter set through the "ADD UCELLDRD" command takes precedence over that set through the "SET UDRD" command. Read & Write
OFF
Cell
If this parameter is set through both the "ADD UCELLDRD" and "SET UDRD" commands, the parameter set through the "ADD UCELLDRD" command takes precedence over that set through the "SET UDRD" command. Read & Write
OFF
RNC
If this parameter is set through both the "ADD UCELLDRD" and "SET UDRD" commands, the parameter set through the "ADD UCELLDRD" command takes precedence over that set through the "SET UDRD" command. Read & Write
30 RNC
This parameter is valid only when the "LdbDRDchoice" parameter is set to POWER.
None
OFF
Cell
None
FALSE
Cell
None
13 Cell
None
IUBLDR
RNC
UULDR
RNC
10 RNC
When "ChoiceRprtUnitForUlBasi cMeas" and "ChoiceRprtUnitForDlBasi cMeas" are set to MIN,the value of this parameter must satisfy the following relationship: "LdrPeriodTimerLen" > 2 x 60 x "MinForUlBasicMeas"; "LdrPeriodTimerLen" > 2 x 60 x "MinForDlBasicMeas"; When "ChoiceRprtUnitForUlBasi cMeas" and "ChoiceRprtUnitForDlBasi cMeas" are set to TEN_MSEC,the value of this parameter must satisfy the following relationship: "LdrPeriodTimerLen" x 1000 > 2 x "TenMsecForUlBasicMea s"; "LdrPeriodTimerLen" x 1000 > 2 x "TenMsecForDlBasicMea s". Read & Write
CREDITLDR
RNC
CODELDR
RNC
"LdrFirstPri","LdrSecondP ri","LdrThirdPri","LdrFourt hPri" must be set differently. Read & Write 1.The parameter is used in command "ADD ADJMAP " as loadeq table index for gold,silver,and bronze users. 2.When TRANST of ADJNODE is dual stack or hybrid IP,loadeq can be added. Read & Write
None
BSC6900
None
Adjacent node
The load EQ table index is configured by setting the value of "LEI" in "ADD LOADEQ". Read & Write
None
Adjacent node
The load EQ table index is configured by setting the value of "LEI" in "ADD LOADEQ". Read & Write
None
Adjacent node
The load EQ table index is configured by setting the value of "LEI" in "ADD LOADEQ". Read & Write
None
SCCP
None
None
BSC6900
None
None ON
BSC6900 BSC6900
None None
None
BSC6900
None
None
None
None
None IP IP
90 None
None
70 None
None
None
BSC6900
None
D8
RNC
This paramter is valid only when "DlSFLimitCMInd" is set to TRUE. Read & Write
D64
RNC
The low activity rate adjustment function is invalid when "LittleRateThd" >= "UlDcccRateThd" and "LittleRateThd" >= "DlDcccRateThd".
None
None
None
None
None
None
None
Board
None
M3UA_MASTER_MOD BSC6900
None
B1111
SCCP
None
B1111
SCCP
None
None
PVC
None
None
None
None
None
RNC
This paramter is valid only when "MbscNcovHoOn2GldInd" in "SET UMBSCCRRM" is set ON. Read & Write
None
BSC6900
None
None
MP group
None
None
BSC6900
None
None
NodeB
None
None
BSC6900
None
None
SCTP link
None
None
SCTP link
None
OFF
BSC6900
None
None
SCTP link
When the value of "MODE" in "ADD SCTPLNK" is set to Client, this parameter can be modified. Read & Write
None
BSC6900
None
95 Board
None
80 Board
None
None
SCTP link
This parameter determines whether "LOGPORTSN" and "LOGPORTNO" in "ADD SCTPLNK" are valid.
None
SCTP link
When the value of "LOGPORTFLAG" in "ADD SCTPLNK" is set to ON, this parameter is valid. Read & Write
None
SCTP link
When the value of "LOGPORTFLAG" in "ADD SCTPLNK" is set to ON, this parameter is valid. Read & Write
85 Board
None
70 Board
None
ON
Board
None
None
BSC6900
None
None
None
None
None
None
None
ON
E1/T1 port
None
None
E1/T1 port
None
None
None
None
None
None
1 IP logical port None When the value of "CARRYFLAG" in "ADD IPPATH" is set to IP LGCPORT, this parameter is valid.
None
IP path
None
BSC6900
None
None
None
None
None
None
NodeB
None When the value of "CARRYFLAG" in "ADD IPPATH" is set to IP LGCPORT, this parameter is valid.
None
IP path
None
None
90 Board
None
75 Board
None
80 Board
None
65 Board
None
None
BSC6900
None
None
BSC6900
None
INCLUDE
BSC6900
None
None
None
None
APPLICATION
None
None
None
BSC6900
None
OPTLOG
BSC6900
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
None
D5
RNC
None
RNC
42 RNC
None
None
RNC
None
None
Board
None
SAAL
NodeB
None
MAP_HSUPA_TTI_2MS _SWITCH:OFF, MAP_INTER_RAT_PS_I N_CHANLE_LIMIT_SWI TCH:OFF, MAP_PS_BE_ON_E_F ACH_SWITCH:OFF, MAP_PS_STREAM_ON _E_FACH_SWITCH:OF F, MAP_PS_STREAM_ON _HSDPA_SWITCH:OFF , MAP_PS_STREAM_ON _HSUPA_SWITCH:OFF , MAP_SRB_6800_WHE N_RAB_ON_HSDSCH_ SWITCH:OFF RNC
None
None
BSC6900
None
None
PPP link
None
None
MP group
None
None
None
None
Cell
This paramter is valid only when "MaxAllowedUlTxPowerIn d" is set to TRUE. Read & Write
24 Cell
None
FALSE
Cell
None
None
Cell
This parameter is valid when the "CellLocCfgType" is set to BOTH or CELL_ANTENNA. Read & Write
None
Cell
This parameter is valid when the "CellLocCfgType" is set to BOTH or CELL_ANTENNA. Read & Write
SCTP link
The value to be set should be larger than the value of "MAXPATHRETR" in "ADD SCTPLNK". Read & Write
1 Cell
None
1 Cell
None
None
RAB
None
None
RAB
None
None
150 RNC
The value of this parameter must satisfy the following relationship: "MaxCAPSLowLoad" > "MaxCAPSMidLoad" > "SharingOutCAPSMidLoa d". Read & Write
100 RNC
The value of this parameter must satisfy the following relationship: "MaxCAPSLowLoad" > "MaxCAPSMidLoad" > "SharingOutCAPSMidLoa d". Read & Write
4 SAAL link
None
3 Cell
None
D15
Transport channel
None
49 RNC
None
3 RNC
The value of this parameter must not larger than "MaxCellInActiveSet" of "SET UINTRAFREQHO" or "ADD UCELLINTRAFREQHO". Read & Write
None
RAB
This parameter is required when the "TrchType" parameter is set to TRCH_EDCH_2MS or TRCH_EDCH_10MS. Read & Write
48 Cell
None
10 Cell
None
1031 None
None
16 RNC
None
64 Cell
None
20 Cell
None
3 RNC
None
None
None
MP group
None
None
BSC6900
None
1 NodeB
None
0 SAAL link
None
BSC6900
None
SCTP link
The value to be set should be smaller than the value of "MAXASSOCRETR" in "ADD SCTPLNK".
346 Cell
None
25(UNI), 500(NNI)
SAAL link
None
None
BSC6900
None
5 RNC
The value of this parameter must be set to meet the following conditions: 100 x "MaxQueueTimeLen" > "PollTimerLen". Read & Write
64 PPP link
None
None
MP group
None
75 Cell
None
12 None
None
16 None
None
430 Cell
None
24 Cell
None
24 Cell
None
24 Cell
None
24 Cell
None
1 Cell
None
None
BSC6900
None
FALSE
Cell
None
0 Cell
None
None
None
None
None
None
None
100 RNC
This parameter is valid only when "AFSetObj" is set to GOLD, SILVER, or COPPER. Read & Write
100 BSC6900
None
COMMON
Cell
None
1 Cell
None
2 None
This parameter is used with the "ADD UMBMSALARMSERVICE " command to enable the no MBMS data check. Read & Write
OFF
RNC
This parameter is valid olny when "MbmsSwitch" is ON. Read & Write
None
MBMS Service
None
None
MBMS Service
None
TRUE
Cell
None
1 Cell
None
OFF
RNC
None
D16
RNC
None
None
RNC
None
None
MBMS Service
None
ON
RNC
None
None
BSC6900
None
PTM
RNC
None
1000 PVC
None
None
RNC
None
None
RNC
None
None
RNC
None
None
RNC
None
None
RNC
None
None
RNC
None
None
RNC
None
None
Cell
None
None
RNC
None
3 RNC
The relationship of parameters must be set as follows: "McchAccessPeriodCoef" > "McchRepPeriodCoef". Read & Write The relationship of parameters must be set as follows: "McchModPeriodCoef" > "DRXCycleLenCoef" in "ADD CNDOMAIN".
7 RNC
1 RNC
The relationship of parameters must be set as follows: "McchAccessPeriodCoef" > "McchRepPeriodCoef". Read & Write
None
MP group
None
None
PVC
None
None
Board
None
None
AUTO
Cell
This parameter is valid when "InterRatReportMode" is set to EVENT_TRIGGER. Read & Write
None
None
LONG
MP group
None
None
Cell
None
-7 Cell
None
FALSE
Cell
This paramter is valid only when "STTDSupInd" of "ADD UCELLSETUP" is set to STTD_Supported. Read & Write
None
D14
Transport channel
None
SF8
NodeB
None
21 RNC
None
None
Cell
None
None
Cell
None
None
Cell
None
None
RNC
This parameter is valid only when "ChoiceRprtUnitForDlBasi cMeas" is set to MIN,and it must satisfy the following relationship: "MinForDlBasicMeas" x 60 < "IntraFreqLdbPeriodTimer Len"/2; "MinForDlBasicMeas" x 60 < "PucPeriodTimerLen"/2; "MinForDlBasicMeas" x 60 < "LdrPeriodTimerLen"/2; "MinForDlBasicMeas" x 60000 < "OlcPeriodTimerLen"/2 . Read & Write
None
RNC
This parameter is valid only when "ChoiceRprtUnitForDlOlc Meas" is set to MIN. Read & Write
None
RNC
This parameter is valid only when "ChoiceRprtUnitForHsdpa RateMeas" is set to MIN. Read & Write
None
RNC
This parameter is valid only when "ChoiceRprtUnitForHsdpa PwrMeas" is set to MIN. Read & Write
None
RNC
This parameter is valid only when "ChoiceRprtUnitForHsupa RateMeas" is set to MIN. Read & Write
None
RNC
This parameter is valid only when "ChoiceRprtUnitForUlBasi cMeas" is set to MIN,and it must satisfy the following relationship: "MinForUlBasicMeas" x 60 < "LdrPeriodTimerLen"/2; "MinForUlBasicMeas" x 60000 < "OlcPeriodTimerLen"/2 . Read & Write
None
RNC
This parameter is valid only when "ChoiceRprtUnitForUlOlc Meas" is set to MIN. Read & Write
None
Cell
None
1 IMA group
None
313 Cell
The value of this parameter must satisfy the following relationship: "MinPCPICHPower" <= "MaxPCPICHPower". Read & Write
SF4
NodeB
None
None
None
None
8 Cell
None
None
RNC
None
None
Cell
None
None
RNC
None
When "MOCNSupport" in "SET UOPERATORSHARING MODE" is set to YES, MocnControlSwitch needs to be set.Otherwise,it does not need. Read & Write
NO
RNC
None
AUTO
BSC6900
None
None
SCTP link
None
OFF
BSC6900
None
None
BSC6900
None
None
None
None
None
None
None
None
1000 RAB
This parameter is required when the "RlcMode" parameter is set to AM and the "AmRlcCfgPara" parameter is set to FLOWCONTROL_PARA. Read & Write
60 RNC
None
None
MP group
None
None
None
None
MPS_NEUTRAL
SAAL link
MCPPP
MP group
None
None
None
None
None
None
None
OFF
RNC
None
OFF
RNC
None
None
Cell
When the value of "MsgInd" is set to ON, this parameter is valid. When "CBSwitch" is set to ON in "SET URNCCBPARA" and the CBS license is valid, the cell broadcast can be performed in a specified cell. This parameter specifies the content of broadcast messages. Read & Write
OFF
Cell
None
None
None
ON
BSC6900
None
60 Cell
The value of this parameter must satisfy the following relationship: "MtchMaxPwr" >= "MtchRsvPwr" Read & Write
40 Cell
The value of this parameter must satisfy the following relationship: "MtchMaxSf" >= "MtchRsvSf" Read & Write
80 Cell
The value of this parameter must fulfill the following condition: "MtchMinPerc0" >= "MtchMinPerc15". Read & Write
50 Cell
The value of this parameter must fulfill the following condition: "MtchMinPerc0" >= "MtchMinPerc15". Read & Write
D16
RNC
None
FALSE
RNC
None
20 Cell
The value of this parameter must satisfy the following relationship: "MtchMaxPwr" >= "MtchRsvPwr". Read & Write
16 Cell
The value of this parameter must satisfy the following relationship: "MtchMaxSf" >= "MtchRsvSf" Read & Write
MET
None
None
MET
Cell
None
None
1696 BSC6900
None
1000 MP group
None
None
MP group
None
None
None
None
None
None
None
3 RNC
None
3 RNC
None
3 RNC
None
1 RNC
None
D1
RNC
None
D50
RNC
None
D1
RNC
None
D1
RNC
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
0 Cell
The value of this parameter must be set to meet the following conditions: "NB01max" >= "NB01min". Read & Write
0 Cell
The value of this parameter must be set to meet the following conditions: "NB01max" >= "NB01min". Read & Write
20 RNC
None
None
None
BSC6900
None
None
BSC6900
None
20 RNC
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
None
Cell
None
None
Cell
If the Downlink CAC algorithm switch select the equivalent user number algorithm,then Intra Frequency LDB Algorithm must be closed. Read & Write
None
Cell
PUC should not be adopted if cell's selection and reselection information has been configured but Inter-freq cell reselection threshold not. PUC should not be adopted if cell's interfrequency measurement control information has been configured as not required. Note:Inter-freq cell reselection threshold is set by"ADD UCELLSELRESEL".Interfrequency measurement control information is set by "MOD UCELLMEAS". Read & Write
None
None
None
Cell
None
PRIORITY21&PRIORITY31&PRIORITY41&PRIORITY51&PRIORITY6-1
RNC
None
ALGORITHM_OFF
RNC
None
None
RNC
None
None
Cell
If this paramter is not zero, it is valid only when "NBscIndex" in "ADD UNBSC" is added. Read & Write
60 RNC
None
None
BSC6900
None
None
Cell
None
None
Cell
None
20 Cell
This paramter is valid only when "DynShutDownType" is set to ConditionalShutDown. Read & Write
None
RNC
None
NC0
Cell
None
4 RNC
None
ON
RNC
None
8 Cell
This parameter is valid only when "NonhcsInd" is set to CONFIGURED. Read & Write
YES
SCCP
None
None
BSC6900
None
None
IP route
None
None
None
None
15 Cell
The value of the parameter must satisfy the function below: "NFastSpdEst"*"TSlowSp dEst" >= "NSlowSpdEst"*"TFastSp dEst". Read & Write
None
SCCP
5 Cell
None
MODE2
RNC
NMO needs to be set when "CNDomainId" in "ADD UCNDOMAIN" is set to PS_DOMAIN; NMO does not need to be set when "CNDomainId" in "ADD UCNDOMAIN" is set to CS_DOMAIN. Read & Write
3 RNC
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
NodeB
None
3840 NodeB
None
3840 NodeB
None
None
Adjacent node
When the value of "NODET" in "ADD ADJNODE" is set to IUB, this parameter is valid. Read & Write
None
BSC6900
None
None
BSC6900
None
None
NodeB
None
None
NodeB
None
None
NodeB
None
None
NodeB
None
None
NodeB
None
R7
NodeB
None
None
NodeB
None
30 NodeB
None
PERIOD
NodeB
None
None
NodeB
None
None
NodeB
None
None
NodeB
None
Normal
NodeB
None
None
NodeB
None
None
NodeB
None
None
Adjacent node
None
PICO_TYPE1
NodeB
None
NOT_CONFIGURED
Cell
None
0 Cell
None
50 Cell
None
None
Cell
This paramter is valid only when "NPrioFlag" is set to TRUE. Read & Write
None
Cell
This paramter is valid only when "NPrioFlag" is set to TRUE. Read & Write
None
Cell
This paramter is valid only when "NPrioFlag" is set to TRUE; Also the value of this parameter must be different to the others. Read & Write
FALSE
Cell
None
3 RNC
None
3 None
None
None
RNC
None
None
RNC
None
None
RNC
None
None
RNC
None
None
BSC6900
None
None
RNC
None
None
NodeB
1. If the original ATM address of the NodeB is configured with the route through "ADD AAL2RT", the parameter cannot be modified. 2. If the original ATM address of the NodeB is configured with the route in the AAL2RT table, the parameter cannot be modified.
3 Cell
The value of the parameter must satisfy the function below: "NFastSpdEst"*"TSlowSp dEst" >= "NSlowSpdEst"*"TFastSp dEst". Read & Write
None
RNC
NullNRI must be set When the value of "CsNriCfgMode" in "SET UOPERATORCFGPARA" is set to SUPP_IUFLEX or SUPP_IUFLEX_MOCN, or the value of "PsNriCfgMode" in "SET UOPERATORCFGPARA" is set to SUPP_IUFLEX or SUPP_IUFLEX_MOCN. Read & Write
None
Cell
Only when "RestrictionType" in "ADD UCELLDSACMANUALPA RA" is RestrictionFixed, this parameter should be configured. Read & Write
2 RNC
When "DsacAutoSwitch"is set to ON,the parameter need configuring;else,need not. Read & Write
None
0 PPP link
None
0 MP group
None
None
Port queue
None
None
Port queue
None
None
BSC6900
None
4 Cell
None
-4 Cell
None
4 Cell
None
-4 Cell
None
2 Cell
None
-2 Cell
None
3000 RNC
When "ChoiceRprtUnitForUlBasi cMeas" and "ChoiceRprtUnitForDlBasi cMeas" are set to MIN,the value of this parameter must satisfy the following relationship: "OlcPeriodTimerLen" > 2 x 60 x 1000 x "MinForUlBasicMeas"; "OlcPeriodTimerLen" > 2 x 60 x 1000 x "MinForDlBasicMeas"; When "ChoiceRprtUnitForUlBasi cMeas" and "ChoiceRprtUnitForDlBasi cMeas" are set to TEN_MSEC,the value of this parameter must satisfy the following relationship: "OlcPeriodTimerLen" > 2 x "TenMsecForUlBasicMea s"; "OlcPeriodTimerLen" > 2 x "TenMsecForDlBasicMea s". Read & Write
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
None
RNC
None
None
None
None
None
RAB
None
R5_POSDATA_SWITC H RNC
None
None
Board
None
None
Cell
This parameter is valid when the "CellLocCfgType" is set to BOTH or CELL_CENTER. Read & Write
Step_by_Step
None
None
ACTIVE
Cell
This parameter is valid when the "CellLocCfgType" is set to BOTH or CELL_ANTENNA. Read & Write
UE_ASSISTED
RNC
None
NOT_FORBIDDEN
Cell
This parameter is valid when the OVERLAY_SWITCH is ON The OVERLAY_SWITCH is in "HoSwitch" in "SET CORRMALGOSWITCH". Read & Write
LOCAL
AAL2 path
None
YES
BSC6900
None
75 Board
None
65 Board
None
ON
Board
None
DISABLED
IP path
None
None
None
None
None
IP path
None
None
AAL2 path
None
None None
IP path None
None None
QoS
IP path
None
None
None
None
-20 Cell
None
1. The value of this parameter must satisfy the following relationship: "MinPCPICHPower" <= "PCPICHPower" <= "MaxPCPICHPower" 2. To modify the PCPICH power, the intra-frequency load balance algorithm of the cell should be disabled. You can use "LST UCELLALGOSWITCH" to query the switch and use "MOD UCELLALGOSWITCH" to modify the switch. Read & Write
2 Cell
None
None
PVC
None
PC_AMR_MODE_INDU CE_BLER_ALTER_SWI TCH:OFF, PC_DL_INNER_LOOP_ PC_ACTIVE_SWITCH: ON, PC_DOWNLINK_POW ER_BALANCE_SWITC H:ON, PC_EFACH_ECN0_DY N_ADJ_SWITCH:OFF, PC_FP_MULTI_RLS_IN D_SWITCH:ON, PC_HSUPA_HARQNU M_AUTO_ADJUST_SW ITCH:OFF, PC_HSUPA_PO_UPDA TE_SWITCH:OFF, PC_INNER_LOOP_LMT ED_PWR_INC_SWITC H:OFF, PC_OLPC_SWITCH:ON , PC_RL_RECFG_SIR_T ARGET_CARRY_SWIT CH:OFF, PC_SIG_DCH_OLPC_S WITCH:OFF, PC_UL_SIRERR_HIGH _REL_UE_SWITCH:OF F RNC
None
5 SCCP
None
None
Cell
None
None
BSC6900
None
None
MP group
None
None
None
None
None
BSC6900
None
None
SCTP link
None
None
SCTP link
None
None
IP path
"IPADDR" and "PEERIPADDR" in "ADD IPPATH" must be at one network segment;("IPADDR","PEE RIPADDR","PEERMASK" in "ADD IPPATH") conflicts with other IPPATH whose type is IUPS. Read & Write
None
IPoA PVC
None
None
BSC6900
None
None
None
None
Invalid
Cell
None
255.255.255.255
IP path
("IPADDR","PEERIPADD R","PEERMASK" in "ADD IPPATH") conflicts with other IPPATH whose type is IUPS. Read & Write
None
NodeB
None
None
SCTP link
None
None
RNC
None
none
BSC6900
None
none
BSC6900
None
none
BSC6900
None
None
IPoA PVC
None
30 Cell
None
30 Cell
None
D4000
RAB
None
D4000
RAB
None
1 RAB
This parameter is required when the "RlcMode" parameter is set to AM and the "AmRlcCfgPara" parameter is set to FLOWCONTROL_PARA. Read & Write
1 RAB
This parameter is required when the "RlcMode" parameter is set to AM and the "AmRlcCfgPara" parameter is set to FLOWCONTROL_PARA. Read & Write
5 IP path
When the value of "PATHCHK" in "ADD IPPATH" is set to ENABLED, this parameter is valid. Read & Write
1 Cell
This parameter is valid when "InterFreqReportMode" is set to EVENT_TRIGGER. Read & Write
4 Cell
None
1 Cell
This parameter is valid when "InterRatReportMode" is set to EVENT_TRIGGER. Read & Write
4 Cell
None
D16
Cell
None
D16
Cell
None
D64
Cell
None
150 RNC
None
None
Physical channel
This parameter is valid when "AccessServiceClass" is set to ASC2,ASC3,ASC4,ASC5, ASC6 or ASC7. Read & Write
Enable
PPP link
None
Enable
MP link
None
None
Board
The phb of the traffic's transmission path is determined like this: if the phb of this transmission path is QOS, use the traffic's phb from TRMMAP; if the phb of this transmission path is BE,AF11,AF12,AF13,AF2 1,AF22,AF23,AF31,AF32, AF33,AF41,AF42,AF43,E F, use the phb of transmission path. Read & Write
None
IP Path
None
None
Cell
None
Physical 6 channel
None
None
Cell
None
3 Cell
None
8 Cell
None
2 Cell
None
4 Cell
None
0 Cell
None
Physical 1 channel
None
None
Cell
None
10 Cell
None
V36
Physical channel
None
-7 Cell
None
None
None
BSC6900
None
10 BSC6900
None
128 BSC6900
None
None
RNC
The value of this parameter must satisfy the following relationship: "PlmnValTagMax" > "PlmnValTagMin". Read & Write
None
RNC
The value of this parameter must satisfy the following relationship: "PlmnValTagMax" > "PlmnValTagMin". Read & Write
60 Board
None
67 Board
None
50 Board
None
62 Board
None
ON
Board
None
None
None
None
None
None
None
None
BSC6900
None
None
Board
None
None
E1/T1 port
None
None
None
None
None
None
None
None
None
None
BSC6900
None
None
Board
None
None
None
None
If port 0 or port 4 of the FG2a board is set to the GE port, the port number can only be 0 or 4. Otherwise, the port number ranges from 0 to 7. If only port 0 is set to the GE port, ports 1-3 are unavailable. If port 4 is set to the GE port, ports 5-7 Ethernet port are unavailable. Read & Write
None
None
None
None
None
NodeB
None
None
BSC6900
None
None
BSC6900
None
50 RNC
The value of this parameter must be set to meet the following conditions: 100 x "MaxQueueTimeLen" > "PollTimerLen". Read & Write
750(UNI), 100(NNI)
SAAL link
None
None
BSC6900
None
None
BSC6900
None
Ethernet port None None None None None None None None None
Read & Write Read & Write Read & Write Read & Write Read & Write
None None
None None
None None
In signaling transmission mode, set PowerOffsetPpm to -3; in service transmission mode, set Physical PowerOffsetPpm to -2. channel
None
2 Cell
None
None
PPP link
None
None
MP link
None
None
Disable
MP group
None
2 BSC6900
When the value of "PORTPROTYPE" in "ADD PORTFLOWCTRLPARA" is set to IP, this parameter should be set. Read & Write
4 Cell
None
D500
Cell
This parameter is valid when "InterFreqReportMode" is set to PERIODICAL_REPORTI NG. Read & Write
20 Cell
None
Physical channel
None
OFF
RNC
None
ON
RNC
None
60 Board
None
72 Board
None
50 Board
None
65 Board
None
ON
Board
None
0 SCCP
None
0 None
None
None
IP route
None
HIGH
Cell
None
ARP
RNC
None
1 RNC
None
1 RNC
None
1 RNC
None
1 RNC
None
1 RNC
None
None
BSC6900
None
None
RNC
None
None
RNC
None
ITUT
SCCP
None
20 RNC
1. For the detection timers that do not need to configure background services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure background services, the related T1 and T2 must not be 0 at the same time. Read & Write
20 RNC
1. For the detection timers that do not need to configure conversational services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure conversational services, the related T1 and T2 must not be 0 at the same time. Read & Write
20 RNC
1. For the detection timers that do not need to configure IMS signaling services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure IMS signaling services, the related T1 and T2 must not be 0 at the same time. Read & Write
20 RNC
1. For the detection timers that do not need to configure interactive services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure interactive services, the related T1 and T2 must not be 0 at the same time. Read & Write
20 RNC
1. For the detection timers that do not need to configure streaming services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure streaming services, the related T1 and T2 must not be 0 at the same time. Read & Write
ALL
E1/T1 port
None
None
Board
None
ALL
None
None
100 BSC6900
None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transmission type is IP or Hybrid IP, the parameter is AF23. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transmission type is IP, the parameter is AF23. When the interface type is Iu-PS, the parameter is AF23. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR or IUPS, this parameter is valid. Read & Write
30 BSC6900
None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transmission type is dual stack, the parameter is AF23; transmission type is Hybrid IP, the parameter is LQAF23. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. When the interface type is Iu-PS, the parameter is NULL. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
100 BSC6900
None
100 BSC6900
None
None
70 BSC6900
None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transmission type is IP or Hybrid IP, the parameter is AF43. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transmission type is IP, the parameter is AF43. When the interface type is Iu-PS, the parameter is AF43. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR or IUPS, this parameter is valid. Read & Write
100 BSC6900
None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transmission type is dual stack, the parameter is AF43; transmission type is Hybrid IP, the parameter is LQAF43. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. When the interface type is Iu-PS, the parameter is NULL. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
0 BSC6900
None
70 BSC6900
None
None
Cell
None
None
Cell
None
30 BSC6900
None
100 BSC6900
None
60 Cell
This parameter is valid when "NcovHoOn2GldInd" in "SET UINTERRATHONCOV" is set to ON. Read & Write
20 RNC
1. For the detection timers that do not need to configure background services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure background services, the related T1 and T2 must not be 0 at the same time. Read & Write
20 RNC
1. For the detection timers that do not need to configure conversational services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure conversational services, the related T1 and T2 must not be 0 at the same time. Read & Write
20 RNC
1. For the detection timers that do not need to configure IMS signaling services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure IMS signaling services, the related T1 and T2 must not be 0 at the same time. Read & Write
20 RNC
1. For the detection timers that do not need to configure interactive services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure interactive services, the related T1 and T2 must not be 0 at the same time. Read & Write
120 RNC
None
20 RNC
1. For the detection timers that do not need to configure streaming services, the related T1 and T2 must be 0 at the same time. 2. For the detection timers that need to configure streaming services, the related T1 and T2 must not be 0 at the same time. Read & Write
OFF
RNC
None
900 RNC
PsInfoUpdTmr needs to be set when "PsInfoUpdFlag" in "SET UOPERATORCFGPARA" is set to ON; PsInfoUpdTmr does not need to be set when "PsInfoUpdFlag" in "SET UOPERATORCFGPARA" is set to OFF. Read & Write
100 BSC6900
None
100 BSC6900
None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transmission type is IP or Hybrid IP, the parameter is AF23. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transmission type is IP, the parameter is AF23. When the interface type is Iu-PS, the parameter is AF23. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR or IUPS, this parameter is valid. Read & Write
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transmission type is dual stack, the parameter is AF23; transmission type is Hybrid IP, the parameter is LQAF23. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. When the interface type is Iu-PS, the parameter is NULL. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transmission type is IP or Hybrid IP, the parameter is AF23. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transmission type is IP, the parameter is AF23. When the interface type is Iu-PS, the parameter is AF23. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR or IUPS, this parameter is valid. Read & Write
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transmission type is dual stack, the parameter is AF23; transmission type is Hybrid IP, the parameter is LQAF23. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. When the interface type is Iu-PS, the parameter is NULL. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transmission type is IP or Hybrid IP, the parameter is AF23. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transmission type is IP, the parameter is AF23. When the interface type is Iu-PS, the parameter is AF23. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR or IUPS, this parameter is valid. Read & Write
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transmission type is dual stack, the parameter is AF23; transmission type is Hybrid IP, the parameter is LQAF23. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. When the interface type is Iu-PS, the parameter is NULL. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
30 BSC6900
None
100 BSC6900
None
30 BSC6900
None
100 BSC6900
None
SUPP_NONE
RNC
The network resource identifier (NRI) needs to be set when MOCN or IuFlex is supported. Read & Write
None
None
PSNRILength needs to be set when the value of "PsNriCfgMode" in "SET UOPERATORCFGPARA" is set to SUPP_IUFLEX, SUPP_MOCN or SUPP_IUFLEX_MOCN; PSNRILength does not need to be set when the value of "PsNriCfgMode" in "SET UOPERATORCFGPARA" is set to SUPP_NONE. Read & Write
40 RNC
None
100 RNC
None
60 RNC
None
200 RNC
None
None
Cell
None
TRUE
RNC
When "DsacAutoSwitch"is set to ON,the parameter need configuring;else,need not. Read & Write
OFF
Cell
None
100 BSC6900
None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transmission type is IP or Hybrid IP, the parameter is AF43. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transmission type is IP, the parameter is AF43. When the interface type is Iu-PS, the parameter is AF43. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR or IUPS, this parameter is valid. Read & Write
100 BSC6900
None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transmission type is dual stack, the parameter is AF43; transmission type is Hybrid IP, the parameter is LQAF43. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. When the interface type is Iu-PS, the parameter is NULL. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
0 BSC6900
None
100 BSC6900
None
PS_BE_EXTRA_LOW_ RATE_ACCESS_SWIT CH:OFF, PS_BE_INIT_RATE_DY NAMIC_CFG_SWITCH: OFF,PS_BE_IU_QOS_ NEG_SWITCH:OFF,PS _RAB_DOWNSIZING_S WITCH:ON, PS_RSC_FEEDBK_RA BSETUP_CACFAIL_SW ITCH:OFF, PS_STREAM_IU_QOS_ NEG_SWITCH:OFF, PS_BE_STRICT_IU_Q OS_NEG_SWITCH:OF F RNC
PS_RAB_DOWNSIZING_ SWITCH is valid when DRA_DCCC_SWITCH in "DraSwitch" is set to ON. Read & Write
None
BSC6900
None
None
BSC6900
None
None
None
None
None
BSC6900
None
None
E1/T1 port
None
None
BSC6900
None
None
BSC6900
None
ON
RNC
None
OFF
RNC
None
ON
RNC
None
None
E1/T1 port
None
None
E1/T1 port
None
None
None
None
BSC6900
None
6 RNC
None
1800 RNC
When "ChoiceRprtUnitForDlBasi cMeas" is set to MIN,the value of this parameter must satisfy the following relationship: "PucPeriodTimerLen" > 2 x 60 x "MinForDlBasicMeas"; When "ChoiceRprtUnitForDlBasi cMeas" is set to TEN_MSEC,the value of this parameter must satisfy the following relationship: "PucPeriodTimerLen" x 1000 > 2 x "TenMsecForDlBasicMea s". Read & Write
10 RNC
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
None
None
None
None
None
None
ALGORITHM1
RNC
None
None
Port queue
None
None
Port queue
None
None
Port queue
None
None
Port queue
None
None
Port queue
None
CS2
Adjacent node
When the value of "NODET" in "ADD ADJNODE" is set to IUB, IUR, or IUCS, and the value of "IsROOTNODE" in "ADD ADJNODE" is set to YES, or the value of "NODET" in "ADD ADJNODE" is set to UNI_AAL2SWITCH or NNI_AAL2SWITCH, this parameter is valid. Read & Write
20 Cell
This paramter is valid only when "UseOfHcs" is set to TRUE. Read & Write
20 Cell
This parameter is valid only when "UseOfHcs" is set to USED. Read & Write
255 Cell
None
255 Cell
None
255 Cell
None
255 Cell
None
0 Cell
None
None
Cell
This paramter is valid only when "QqualminInd" is set to TRUE. Read & Write
-18 Cell
None
FALSE
Cell
None
None
Cell
This paramter is valid only when "QrxlevminInd" is set to TRUE. Read & Write
-50 Cell
None
-58 Cell
None
FALSE
Cell
This paramter is valid only when "QrxlevminInd" is set to TRUE. Read & Write
FALSE
Cell
None
FALSE
Cell
None
CPICH_ECNO
Cell
None
OFF
RNC
None
5 RNC
None
None
RNC
None
None
RNC
None
None
RAB
None
5 RNC
None
None
RNC
None
SELECT ALL
Physical channel
None
30000 RNC
None
NO
RNC
None
None
Cell
None
120000 RNC
None
None
1 Cell
None
5000 Cell
None
68 Cell
None
3000 Cell
None
None
BSC6900
None
5000 RNC
None
5000 RNC
None
5000 RNC
None
REC_ALL
BSC6900
None
6 RNC
The value of this parameter must be larger than the value of the "UpLimitCountingTime" parameter under the "SET URNCMBMSPARA" command. Read & Write
130 Cell
None
None
Board
None
DependOnNCell
Cell
If this parameter is set through both the "ADD UCELLDRD" and "SET UDRD" commands, the parameter set through the "ADD UCELLDRD" command takes precedence over that set through the "SET UDRD" command. Read & Write If this parameter is set through both the "ADD UCELLDRD" and "SET UDRD" commands, the parameter set through the "ADD UCELLDRD" command takes precedence over that set through the "SET UDRD" command. Read & Write 1. This parameter is valid when "RedirSwitch" is set to ONLY_TO_INTER_FREQ UENCY or ONLY_TO_INTER_RAT. 2. If the value of this parameter is set in both the "SET REDIRECTION" and "ADD CELLREDIRECTION" commands, the value set in the "ADD CELLREDIRECTION" command prevails. Read & Write
DependOnNCell
RNC
None
Cell
None
RNC
AMR:100;Other:0
Cell
1. This parameter is valid when "RedirSwitch" is set to ONLY_TO_INTER_FREQ UENCY or ONLY_TO_INTER_RAT. 2. If the value of this parameter is set in both the "SET REDIRECTION" and "ADD CELLREDIRECTION" commands, the value set in the "ADD CELLREDIRECTION" command prevails. Read & Write
AMR:100; Other:0
RNC
This parameter is valid when "RedirSwitch" is set to ONLY_TO_INTER_FREQ UENCY or ONLY_TO_INTER_RAT. Read & Write
0 Cell
1. This parameter is valid when "RedirSwitch" is set to ONLY_TO_INTER_FREQ UENCY or ONLY_TO_INTER_RAT. 2. If the value of this parameter is set in both the "SET REDIRECTION" and "ADD CELLREDIRECTION" commands, the value set in the "ADD CELLREDIRECTION" command prevails. Read & Write
0 RNC
This parameter is valid when "RedirSwitch" is set to ONLY_TO_INTER_FREQ UENCY or ONLY_TO_INTER_RAT. Read & Write
None
Cell
None
None
Cell
If this parameter is set through both the "ADD UCELLDRD" and "SET UDRD" commands, the parameter set through the "ADD UCELLDRD" command takes precedence over that set through the "SET UDRD" command. The value range of this parameter depends on the setting of the "ReDirBandInd" parameter, as shown below: Band1 Common frequencies: [10562-10838] Special frequencies: none Band2 Common frequencies: [9662-9938] Special frequencies: {412, 437, 462, 487, 512, 537, 562, 587, 612, 637, 662, 687} Band3 Common frequencies: [1162-1513] Special frequencies: none Band4 Common frequencies: [1537-1738] Special frequencies: Read & Write
None
RNC
If this parameter is set through both the "ADD UCELLDRD" and "SET UDRD" commands, the parameter set through the "ADD UCELLDRD" command takes precedence over that set through the "SET UDRD" command. The value range of this parameter depends on the setting of the "ReDirBandInd" parameter, as shown below: Band1 Common frequencies: [10562-10838] Special frequencies: none Band2 Common frequencies: [9662-9938] Special frequencies: {412, 437, 462, 487, 512, 537, 562, 587, 612, 637, 662, 687} Band3 Common frequencies: [1162-1513] Special frequencies: none Band4 Common frequencies: [1537-1738] Special frequencies: Read & Write 1. This parameter is valid when "RedirSwitch" is set to ONLY_TO_INTER_FREQ UENCY or ONLY_TO_INTER_RAT. 2. If the value of this parameter is set in both the "SET REDIRECTION" and "ADD CELLREDIRECTION" commands, the value set in the "ADD CELLREDIRECTION" command prevails. Read & Write
None
Cell
None
RNC
None
Cell
This parameter is valid when "RedirBandInd" is not set to BandIndNotUsed. Read & Write If this parameter is set through both the "ADD UCELLDRD" and "SET UDRD" commands, the parameter set through the "ADD UCELLDRD" command takes precedence over that set through the "SET UDRD" command. This parameter is required only when the "ReDirUARFCNUplinkInd" parameter is set to TRUE. The value range of this parameter depends on the setting of the "ReDirBandInd" parameter, as shown below: Band1: Common frequencies: [9612-9888] Special frequencies: none Band2: Common frequencies: [9262-9538] Special frequencies: {12, 37, 62, 87, 112, 137, 162, 187, 212, 237, 262, 287} Band3: Common frequencies: [937-1288] Special frequencies: none Band4: Read & Write
None
RNC
If this parameter is set through both the "ADD UCELLDRD" and "SET UDRD" commands, the parameter set through the "ADD UCELLDRD" command takes precedence over that set through the "SET UDRD" command. This parameter is required only when the "ReDirUARFCNUplinkInd" parameter is set to TRUE. The value range of this parameter depends on the setting of the "ReDirBandInd" parameter, as shown below: Band1: Common frequencies: [9612-9888] Special frequencies: none Band2: Common frequencies: [9262-9538] Special frequencies: {12, 37, 62, 87, 112, 137, 162, 187, 212, 237, 262, 287} Band3: Common frequencies: [937-1288] Special frequencies: none Band4: Read & Write
None
Cell
1. This parameter is valid when "RedirUARFCNUplinkInd" is set to TRUE. 2. This parameter is valid when "RedirBandInd" is set to BandIndNotUsed. 3. If the value of this parameter is set in both the "SET REDIRECTION" and "ADD CELLREDIRECTION" commands, the value set in the "ADD CELLREDIRECTION" command prevails. Read & Write
None
RNC
1. This parameter is valid when "RedirUARFCNUplinkInd" is set to TRUE. 2. This parameter is valid when "RedirBandInd" is set to BandIndNotUsed. Read & Write
None
Cell
If this parameter is set through both the "ADD UCELLDRD" and "SET UDRD" commands, the parameter set through the "ADD UCELLDRD" command takes precedence over that set through the "SET UDRD" command. Read & Write
None
RNC
If this parameter is set through both the "ADD UCELLDRD" and "SET UDRD" commands, the parameter set through the "ADD UCELLDRD" command takes precedence over that set through the "SET UDRD" command. Read & Write
None
Cell
1. This parameter is valid when "RedirBandInd" is not set to BandIndNotUsed. 2. If the value of this parameter is set in both the "SET REDIRECTION" and "ADD CELLREDIRECTION" commands, the value set in the "ADD CELLREDIRECTION" command prevails. Read & Write
None
RNC
None
Board
None
None
Board
None
None
Board
None
None
Board
None
NO
Board
None
ON
RNC
None
None
RNC
None
None
5000 RNC
None
10000 RNC
None
15000 RNC
None
20000 RNC
None
3000 RNC
None
45000 RNC
None
5000 RNC
None
5000 RNC
None
10000 RNC
None
None
2 RNC
None
None
BSC6900
None
None
None
None
None
IP route
None
0 RNC
None
300 RNC
None
D4000
Cell
None
D4000
Cell
None
D1000
Cell
None
None
RAB
None
60 Board
None
75 Board
None
50 Board
None
65 Board
None
ON
Board
None
RESERVED_SWITCH_ 0_BIT1:OFF, RESERVED_SWITCH_ 0_BIT2:OFF, RESERVED_SWITCH_ 0_BIT3:OFF, RESERVED_SWITCH_ 0_BIT4:OFF, RESERVED_SWITCH_ 0_BIT5:OFF, RESERVED_SWITCH_ 0_BIT6:OFF, RESERVED_SWITCH_ 0_BIT7:OFF, RESERVED_SWITCH_ 0_BIT8:OFF, RESERVED_SWITCH_ 0_BIT9:OFF, RESERVED_SWITCH_ 0_BIT10:OFF, RESERVED_SWITCH_ 0_BIT11:OFF, RESERVED_SWITCH_ 0_BIT12:OFF, RESERVED_SWITCH_ 0_BIT13:OFF, RESERVED_SWITCH_ 0_BIT14:OFF, RESERVED_SWITCH_ 0_BIT15:OFF, RESERVED_SWITCH_ 0_BIT16:OFF, RESERVED_SWITCH_ 0_BIT17:OFF, RESERVED_SWITCH_ RNC
None
RESERVED_SWITCH_ 1_BIT1:ON, RESERVED_SWITCH_ 1_BIT2:ON, RESERVED_SWITCH_ 1_BIT3:ON, RESERVED_SWITCH_ 1_BIT4:ON, RESERVED_SWITCH_ 1_BIT5:ON, RESERVED_SWITCH_ 1_BIT6:ON, RESERVED_SWITCH_ 1_BIT7:ON, RESERVED_SWITCH_ 1_BIT8:ON, RESERVED_SWITCH_ 1_BIT9:ON, RESERVED_SWITCH_ 1_BIT10:ON, RESERVED_SWITCH_ 1_BIT11:ON, RESERVED_SWITCH_ 1_BIT12:ON, RESERVED_SWITCH_ 1_BIT13:ON, RESERVED_SWITCH_ 1_BIT14:ON, RESERVED_SWITCH_ 1_BIT15:ON, RESERVED_SWITCH_ 1_BIT16:ON, RESERVED_SWITCH_ 1_BIT17:ON, RESERVED_SWITCH_ RNC
None
0 RNC
None
4294967295 RNC
None
0 RNC
None
255 RNC
None
None
BSC6900
None
None
None
BSC6900
None
3 PPP link
None
3 MP link
None
None
Cell
None
None
BSC6900
None
1 RAB
This parameter is required when the "RlcMode" parameter is set to AM and the "AmRlcCfgPara" parameter is set to FLOWCONTROL_PARA. Read & Write
SRB_OVER_HSDPA:O N, SRB_OVER_HSUPA:O N, TTI_2MS:ON, MIMO:ON, 64QAM:ON, L2_ENHANCE:ON, DTX_DRX:ON, HSSCCH_LESS_OPER ATION:ON RNC
None
None
BSC6900
None
None
RAB
None
None
None
None
None
Transport channel
None
None
Cell
None
Cell
The value of this parameter must not be larger than "RlMaxDlPwr". Read & Write
5000 RNC
None
5000 RNC
None
10000 RNC
None
5000 RNC
None
None
None
None
None
RNC
None
None
RNC
None
None
Subsystem
None
0 RNC
None
None
RNC
None
None
RNC
None
None
BSC6900
None
None
RNC
None
200 RNC
None
60 RNC
None
4 RNC
None
5000 RNC
None
5000 RNC
None
5000 RNC
None
350 RNC
None
1000 RNC
None
5000 RNC
None
5000 RNC
None
None
AAL2 path
When the value of "CARRYT" in "ADD AAL2PATH" is set to UNI, IMA, FRAATM, or NCOPT, this parameter is valid. Read & Write When the value of "ADDTORSCGRP" in "ADD AAL2PATH" is set to YES, this parameter is valid. Read & Write
None
AAL2 path
None
When "ISFIRSTCLASSE" Transmission in "ADD RSCGRP" is set resource to YES, this parameter is group valid. Read & Write
None
None
None
SHARE
NodeB
None
None
BSC6900
None
15000(UNI), 1500(NNI)
SAAL link
None
None
None
None
None
BSC6900
None
OFF
SCCP
When the value of "SPCBITS" is set to BIT14 or BIT24, this parameter is valid.
2 RNC
None
0 RNC
None
None
RNC
None
None
Cell
None
None
NodeB
None
None
RNC
None
None
BSC6900
None
0 RNC
None
None
BSC6900
None
0 RNC
None
0 RNC
None
0 RNC
None
0 RNC
None
0 RNC
None
0 RNC
None
0 RNC
None
None
RNC
None
0 Cell
None
0 NodeB
None
0 RNC
None
None
BSC6900
None
0 RNC
None
0 Cell
None
0 NodeB
None
0 RNC
None
None
BSC6900
None
0 RNC
None
None
BSC6900
None
0 RNC
None
None
BSC6900
None
0 RNC
None
None
BSC6900
None
0 RNC
None
None
BSC6900
None
0 RNC
None
None
BSC6900
None
0 RNC
None
None
BSC6900
None
None
None
4294967295 SCCP
None
1 RNC
180 RNC
None
180 RNC
None
OFF
RNC
When "CNDomainId" is set to CS_DOMAIN, and "TnlBearerType" is set to IP_TRANS, RTCPSwitch needs to be set. Read & Write
None
BSC6900
None
None
BSC6900
None
180 RNC
None
180 RNC
None
D16000
RNC
None
D64
RNC
The following relationship must be satisfied: "RtDH2FTvmThd" < "RtF2DHTvmThd"; "RtDH2FTvmThd" < "RtEFach2DHTvmThd"; "RtDH2FTvmThd" < "RtEFach2CpcTvmThd"; "RtDH2FTvmThd" < "RtF2CpcTvmThd". Read & Write
D5000
RNC
None
D1024
RNC
The following relationship must be satisfied: "RtDH2FTvmThd" < "RtEFach2CpcTvmThd". Read & Write
D0
RNC
None
D1024
RNC
The following relationship must be satisfied: "RtDH2FTvmThd" < "RtEFach2DHTvmThd". Read & Write
D0
RNC
None
D1024
RNC
The following relationship must be satisfied: "RtDH2FTvmThd" < "RtF2CpcTvmThd". Read & Write
D0
RNC
None
D1024
RNC
The following relationship must be satisfied: "RtDH2FTvmThd" < "RtF2DHTvmThd". Read & Write
D0
RNC
None
12 SCTP link
None
25 SCTP link
None
The value to be set should be larger than the value of "RTOMIN" in "ADD SCTPLNK" but smaller than the value of "RTOMAX". Read & Write
The value to be set should be larger than the value of "RTOMIN" in "ADD SCTPLNK". Read & Write
The value to be set should be smaller than the value of "RTOMAX" in "ADD SCTPLNK". Read & Write
None
BSC6900
None
None
IP path
None
None
When "GRPT" in "ADD RSCGRP" is set to ATM or "BWMODE" is set to FULL_DUPLEX, this parameter is valid;The sum of "TxBw" and "RxBw" in "ADD RSCGRP" of upper class RSCGRP can not less than the "TxBw" and "AllBw" in "ADD RSCGRP"of lower class RSCGRP;The "TxBw" in "ADD RSCGRP" of upper class RSCGRP can not less than the "TxBw" in "ADD RSCGRP" of lower class RSCGRP, and the "RxBw" in "ADD RSCGRP" of upper class RSCGRP can not less Transmission than the "RxBw" in "ADD resource RSCGRP" of lower class group RSCGRP. Read & Write
None
None
None
SAAL link
When the value of "CARRYT" is set to IMA, UNI, FRAATM, NCOPT, or ATMLOGICPORT, this parameter is valid. Read & Write
None
AAL2 path
When the value of "CARRYT" in "ADD AAL2PATH" is set to UNI, IMA, FRAATM, NCOPT, or ATMLOGICPORT, this parameter is valid. Read & Write
None
IPoA PVC
None
None
BSC6900
None
1172 RNC
The value of the parameter must satisfy the function below: "RxTxtoTrig6F" "RxTxtoTrig6G" >= 256.
876 RNC
The value of the parameter must satisfy the function below: "RxTxtoTrig6F" "RxTxtoTrig6G" >= 256.
None
Board
None
None
SAAL link
None
None
SAAL link
None
None
None
RNC
None
FALSE
NodeB
None
Physical 50 channel
None
None
BSC6900
None
None
PVC
None
None
Physical channel
None
None
E1/T1 port
None
None
Board
None
1 BSC6900
None
None
SCTP link
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
None
None
BSC6900
None
DISABLE
None
None
None
None
NodeB
None
ALL
BSC6900
None
MBMS service
Cell
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
None
RNC
None
OFF
Cell
If this parameter is set through both the "ADD UCELLDRD" and "SET UDRD" commands, the parameter set through the "ADD UCELLDRD" command takes precedence over that set through the "SET UDRD" command. Read & Write
OFF
RNC
If this parameter is set through both the "ADD UCELLDRD" and "SET UDRD" commands, the parameter set through the "ADD UCELLDRD" command takes precedence over that set through the "SET UDRD" command. Read & Write
None
RNC
None
None
RNC
None
None
BSC6900
None
None
RNC
None
UMTS
BSC6900
None
None
Adjacent node
When the value of "NODET" in "ADD ADJNODE" is set to IUPS, this parameter is valid.
10 RNC
The value of this parameter must satisfy the following relationship: "MaxCAPSLowLoad" > "MaxCAPSMidLoad" > "SharingOutCAPSMidLoa d". Read & Write
DEDICATED
NodeB
None
0 Cell
This parameter is required when the "UseOfHcs" parameter is set to USED but not required when the "UseOfHcs" parameter is set to NOT_USED. Read & Write
This parameter is valid when the SERVICE_HO_BASED_ ON_RNC_SWITCH under the "HoSwitch" parameter is set to on through the "SET CORRMALGOWITCH" command.
None
BSC6900
None
3 RNC
None
60 RNC
None
-20 RNC
None
-24 Cell
None
None
TRUE
Cell
None
FALSE
Cell
None
None
Cell
None
None
RNC
This parameter cannot be set to FACH only when the "RrcCause" parameter is set to EMERGCALLEST or MBMSCALLEST. Read & Write
None
SCCP
None
None
SCCP
None
None
BSC6900
None
TRUE
Transport channel
None
None
None
None
NBAMR_BITRATE_12.2 0K Cell
The following relationship must be satisfied: "GoldMaxMode" >= "SilverMaxMode" >= "CopperMaxMode". Read & Write
The following relationship must be satisfied: "GoldMaxMode" >= "SilverMaxMode" >= "CopperMaxMode". Read & Write
D3.4
RNC
None
D3.4
RNC
None
None
None
None
None
15 BSC6900
None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transmission type is IP or Hybrid IP, the parameter is EF. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transmission type is IP, the parameter is EF. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR or IUPS, this parameter is valid. Read & Write
100 BSC6900
None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transmission type is dual stack, the parameter is EF; transmission type is Hybrid IP, the parameter is LQEF. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
0 BSC6900
None
15 BSC6900
None
0 Cell
This parameter is required when the "UseOfHcs" parameter is set to USED but not required when the "UseOfHcs" parameter is set to NOT_USED. Read & Write
None
Physical channel
None
Physical 0 channel
None
Physical 1 channel
None
Physical 2 channel
None
Physical 3 channel
None
None
Physical channel
None
80 Board
None
70 Board
None
B0000
SCCP
None
None
BSC6900
None
All None
RNC None
None None
None
BSC6900
None
70 Board
None
60 Board
None
70 Board
None
75 Board
None
60 Board
None
65 Board
None
10 None
The number of CPU usage sampling times is at least twice the size of "Fast judgement window". Read & Write
None
None
None
None
None
Adjacent node
When the value of "NODET" in "ADD ADJNODE" is set to IUB, and the value of "IsROOTNODE" in "ADD ADJNODE" is set to YES, or the value of "NODET" in "ADD ADJNODE" is set to UNI_AAL2SWITCH, this parameter is valid. Read & Write
None
BSC6900
None
None
E1/T1 link
None
None
None
None
None
BSC6900
None
None
Subsystem
None
None
BSC6900
None
None
BSC6900
None
None
None
None
None
BSC6900
None
None
Subsystem
None
None
RNC
None
None
RNC
None
OFF
RNC
None
None
BSC6900
None
None
SCCP
None
SCCP
None
SCCP
When the value of "SPDF" is set to DNF, this parameter is valid. Read & Write
OFF
Cell
This parameter is valid when the HCS_SPD_EST_SWITC H is ON and "UseOfHcs" is USED in "ADD CELLHCS". The HCS_SPD_EST_SWITC H in "HoSwitch" in "SET CORRMALGOSWITCH". Read & Write
WNF
SCCP
When the value of "SPDF" in "ADD N7DPC" is set to WNF, this parameter is valid. Read & Write
AUTO
255 Cell
None
None
RNC
None
None
Cell
None
None
RNC
This parameter, "TrafficClass", "UserPriority" and "THP" form an SPI mapping table.
None
RNC
None
None
None
BSC6900
None
70 Cell
The value of this parameter must satisfy the following relationship: "SpucHeavy" >= "SpucLight"; 100 >= "SpucHeavy" + "SpucHyst". Read & Write
5 Cell
The value of this parameter must satisfy the following relationship: "SpucLight" >= "SpucHyst"; 100 >= "SpucHeavy" + "SpucHyst". Read & Write
45 Cell
The value of this parameter must satisfy the following relationship: "SpucHeavy" >= "SpucLight"; "SpucLight" >= "SpucHyst". Read & Write
None
SCCP
None
DCH
RNC
None
FALSE
RNC
None
15 BSC6900
None
32 Cell
This parameter must satisfy the following relationship: "SRBMBR" >= "SRBGBR"
512 Cell
This parameter must satisfy the following relationship: "SRBMBR" >= "SRBGBR"
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transmission type is IP or Hybrid IP, the parameter is EF. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; transmission type is IP, the parameter is EF. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
100 BSC6900
None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transmission type is dual stack, the parameter is EF; transmission type is Hybrid IP, the parameter is LQEF. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
0 BSC6900
None
15 BSC6900
None
None
BSC6900
None
None
None
None
None
None
None
None
None
E1/T1 port
None
None
None
None
E1/T1 port
None
60 SAAL link
None
None
None
None
None
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
None None
Subsystem BSC6900
None None
None
BSC6900
None
None
BSC6900
None
None
Subsystem
None
None
None
None
YES
RNC
NRT
RNC
None
400 RNC
None
60 RNC
None
5 RNC
None
30 RNC
This paramter is valid only when "SRNSR_DSCR_SEPRA T_DUR_SWITCH of [SrnsrSwitch]" in "SET CORRMALGOSWITCH" is set ON. Read & Write
None
60 RNC
None
None None
None BSC6900
None None
None
75 Board
None
85 Board
None
None
RAB
None
80 Board
None
80 Board
None
0 Cell
This parameter is required when the "UseOfHcs" parameter is set to USED but not required when the "UseOfHcs" parameter is set to NOT_USED. Read & Write
2 Cell
None
None
None
None
none
BSC6900
None
None
Subsystem
None
None None
BSC6900 BSC6900
None None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
It is recommended that the service type of signaling link be CBR, the real-time service be CBR or RTVBR, the nonreal-time service be NRTVBR, and the OAM data link be UBR_PLUS. PVC
None
500 RNC
The following relationship must be satisfied: "StaBlkNum5A" >= "Thd5A". Read & Write
None
BSC6900
None
ACTIVE
Cell
None
None
Cell
This paramter is valid only when "DynShutdownSwitch" is set to ON_1 or ON_2 or ON_3; The value of this parameter must fulfill the following condition: "StartTime1" < "EndTime1". Read & Write This paramter is valid only when "DynShutdownSwitch" is set to ON_2 or ON_3; The value of this parameter must fulfill the following condition: "StartTime2" < "EndTime2". Read & Write This paramter is valid only when "DynShutdownSwitch" is set to ON_3; The value of this parameter must fulfill the following condition: "StartTime3" < "EndTime3". Read & Write
None
Cell
None
Cell
20000 RNC
None
20 SCCP
None
67 SAAL link
None
None
BSC6900
None
OFF
SCCP
None
D16
RNC
None
32 Cell
This parameter must satisfy the following relationship: "STREAMMBR" >= "STREAMGBR"
D384
RNC
None
512 Cell
This parameter must satisfy the following relationship: "STREAMMBR" >= "STREAMGBR"
D16
RNC
None
None
BSC6900
None
FALSE
Physical channel
None
STTD_not_Supported
Cell
This paramter is valid only when "TxDiversityInd" is set to TRUE. Read & Write
STTD_not_Supported
Cell
This paramter is valid only when "TxDiversityInd" is set to TRUE. Read & Write
None
RAB
None
352 None
None
None
BSC6900
None
None
BSC6900
None
FALSE
Cell
None
FALSE
NodeB
None
FALSE
Cell
None
FALSE
NodeB
None
NO
RNC
None
None
None
None
None
RNC
When "CNProtclVer" in "ADD UCNNODE" is set to R99, set SupportCRType to CR527_SUPPORT or CR527_NOT_SUPPORT; when "CNProtclVer" in "ADD UCNNODE" is set to R4, set SupportCRType to CR528_SUPPORT or CR528_NOT_SUPPORT; when "CNProtclVer" in "ADD UCNNODE" is set to R5, set SupportCRType to CR529_SUPPORT or CR529_NOT_SUPPORT; when "CNProtclVer" in "ADD UCNNODE" is set to R6, there is no SupportCRType that can be set. Read & Write
FALSE
Cell
None
FALSE
NodeB
None
FALSE
Cell
None
None
None
None
None
BSC6900
None
None
BSC6900
None
None
None
None
None
BSC6900
None
None
BSC6900
None
None
None
None
OFF
RNC
When "CNDomainId" in "ADD UCNNODE" is set to CS_DOMAIN, Switch3GPP25415CR012 5 needs to be set. Read & Write
YES
SCTP link
None
10 SCTP link
None
OFF
BSC6900
None
0 BSC6900
None
OFF
BSC6900
None
OFF
BSC6900
None
OFF
BSC6900
None
OFF
BSC6900
None
OFF
BSC6900
None
0 BSC6900
None
0 BSC6900
None
0 BSC6900
None
None
BSC6900
None
None
BSC6900
None
60 RNC
None
None
None
None
None
None
None
60 RNC
None
10 RNC
None
None
None
None
None
None
None
100 RNC
None
None
None
None
180 RNC
None
None
None
None
None
None
None
None
None
None
D2000
RNC
None
D2000
RNC
None
D2000
RNC
None
D30
RNC
None
D30
RNC
None
D40
RNC
None
5 RNC
None
6 RNC
None
3 RNC
None
D0
RNC
D0
RNC
D30
RNC
None
10 RNC
T3212 needs to be set when "CNDomainId" is set to CS_DOMAIN; T3212 does not need to be set when "CNDomainId" is set to PS_DOMAIN.
D600
RNC
None
None
None
None
None
None
RNC
None
10 RNC
None
-12 Cell
None
-92 Cell
None
-12 Cell
This parameter is valid when the OVERLAY_SWITCH is ON. The OVERLAY_SWITCH is in "HoSwitch" in "SET CORRMALGOSWITCH". Read & Write
-92 Cell
This parameter is valid when the OVERLAY_SWITCH is ON. The OVERLAY_SWITCH is in "HoSwitch" in "SET CORRMALGOSWITCH". Read & Write
-12 Cell
None
-92 Cell
None
16 Cell
None
16 Cell
This parameter is valid when the OVERLAY_SWITCH is ON. The OVERLAY_SWITCH is in "HoSwitch" in "SET CORRMALGOSWITCH". Read & Write
16 Cell
None
None
BSC6900
None
None
RNC
None
Transport channel
None
Cell
None
Transport 1 channel
None
Transport 1 channel
This paramter is valid only when "TFsNumber" is set to D2 or D3. Read & Write
1 Cell
None
Transport 2 channel
None
Transport 2 channel
This paramter is valid only when "TFsNumber" is set to D3. Read & Write
None
RNC
None
RNC
None
RNC
None
RNC
None
None
Cell
None
None
Cell
This paramter is valid only when "CellChoice" is set to 3GCELL. Read & Write
10 MTP3 link
None
D60
Cell
This parameter is required when the "UseOfHcs" parameter is set to USED but not required when the "UseOfHcs" parameter is set to NOT_USED. Read & Write
D20
Cell
This parameter is required when the "UseOfHcs" parameter is set to USED but not required when the "UseOfHcs" parameter is set to NOT_USED. Read & Write
NotUsed
Cell
This parameter is valid only when "NonhcsInd" is set to CONFIGURED. Read & Write
NotUsed
Cell
This parameter is valid only when "NonhcsInd" is set to CONFIGURED. Read & Write
60 Cell
None
D3
Cell
This parameter is valid when "TpenaltyHcsReselect" is not set to D0. Read & Write
D2
Cell
This parameter is valid when "TpenaltyHcsReselect" is not set to D0. Read & Write
480 Cell
None
480 Cell
None
480 Cell
None
100 RNC
This parameter is valid only when "ChoiceRprtUnitForDlBasi cMeas" is set to TEN_MSEC,and it must satisfy the following relationship: "TenMsecForDlBasicMea s" < "IntraFreqLdbPeriodTimer Len" x 1000/2 (See "SET ULDCPERIOD" and "SET USATLDCPERIOD"); "TenMsecForDlBasicMea s" < "PucPeriodTimerLen" x 1000/2 (See "SET ULDCPERIOD" and "SET USATLDCPERIOD"); "TenMsecForDlBasicMea s" < "LdrPeriodTimerLen" x 1000/2 (See "SET ULDCPERIOD" and "SET USATLDCPERIOD"); "TenMsecForDlBasicMea s" < "OlcPeriodTimerLen"/2 (See "SET ULDCPERIOD" and "SET USATLDCPERIOD"). Read & Write
20 RNC
This parameter is valid only when "ChoiceRprtUnitForDlOlc Meas" is set to TEN_MSEC. Read & Write
100 RNC
This parameter is valid only when "ChoiceRprtUnitForDlOlc Meas" is set to TEN_MSEC. Read & Write
100 RNC
This parameter is valid only when "ChoiceRprtUnitForHsdpa RateMeas" is set to TEN_MSEC. Read & Write
100 RNC
This parameter is valid only when "ChoiceRprtUnitForHsdpa PwrMeas" is set to TEN_MSEC. Read & Write
100 RNC
This parameter is valid only when "ChoiceRprtUnitForHsupa RateMeas" is set to TEN_MSEC. Read & Write
100 RNC
This parameter is valid only when "ChoiceRprtUnitForUlBasi cMeas" is set to TEN_MSEC,and it must satisfy the following relationship: "TenMsecForUlBasicMea s" < "LdrPeriodTimerLen" * 1000/2 (See "SET ULDCPERIOD" and "SET USATLDCPERIOD"); "TenMsecForUlBasicMea s" < "OlcPeriodTimerLen" /2 (See "SET ULDCPERIOD" and "SET USATLDCPERIOD") . Read & Write
20 RNC
This parameter is valid only when "ChoiceRprtUnitForUlOlc Meas" is set to TEN_MSEC. Read & Write
480 Cell
None
180 Cell
The value of the parameter must satisfy the function below: "NFastSpdEst"*"TSlowSp dEst" >= "NSlowSpdEst"*"TFastSp dEst". Read & Write
EXISTS
Physical channel
This parameter is valid only when "SlotFormat" is equal to or more than D8. Read & Write
None
Transport channel
None
None
Transport channel
None
None None
BSC6900 BSC6900
None None
None
BSC6900
None
None
BSC6900
None
None
None
None
None
BSC6900
None
280 RNC
The following relationship must be satisfied: "StaBlkNum5A" >= "Thd5A". Read & Write
None
RNC
The following relationship must be satisfied: "ThdEa" <= "ThdEb". Read & Write
None
RNC
The following relationship must be satisfied: "ThdEa" <= "ThdEb". Read & Write
None
RNC
This parameter, "TrafficClass", "UserPriority", and "SPI" form an SPI mapping table. This parameter is required when the "TrafficClass" parameter is set to INTERACTIVE.
Medium
RNC
None
Low
RNC
None
Low
RNC
None
Low
RNC
None
Low
RNC
None
Low
RNC
None
High
RNC
None
High
RNC
None
High
RNC
None
High
RNC
None
High
RNC
None
Medium
RNC
None
Medium
RNC
None
Medium
RNC
None
Medium
RNC
None
None
RNC
This parameter is required when the "TrafficClass" parameter is set to INTERACTIVE; The mapping relationship between the traffic handling priority value of INTERACTIVE service and its corresponding class can be set through command "SET UIAVUSERTHPCLASS". Read & Write
None
BSC6900
None
NOLIMIT None
BSC6900 BSC6900
None None
3000 None
None
None
Cell
This paramter is valid only when "Priority(BLK CELL)" is set to NORMAL. Read & Write
10 AAL2 path
None
0 Cell
None
5000 RAB
This parameter is required when the "RlcMode" parameter is set to AM and the "AmRlcCfgPara" parameter is set to FLOWCONTROL_PARA. Read & Write
D0
Cell
This parameter is valid when "InterFreqReportMode" is set to EVENT_TRIGGER. Read & Write
D320
Cell
None
D1280
Cell
None
0 Cell
This parameter is valid when "InterRatReportMode" is set to PERIODICAL_REPORTI NG. Read & Write
0 Cell
This parameter is valid when "InterFreqReportMode" is set to PERIODICAL_REPORTI NG. Read & Write
0 Cell
This parameter is valid when "InterRatReportMode" is set to PERIODICAL_REPORTI NG. Read & Write
D240
RAB
None
D2560
RAB
None
2 RAB
This parameter is required when the "RlcMode" parameter is set to AM and the "AmRlcCfgPara" parameter is set to FLOWCONTROL_PARA. Read & Write
14 RAB
This parameter is required when the "RlcMode" parameter is set to AM and the "AmRlcCfgPara" parameter is set to FLOWCONTROL_PARA. Read & Write
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
None
None
The TRMMAP index is configured by setting the value of "TMI" in "ADD TRMMAP".
None
None
The TRMMAP index is configured by setting the value of "TMI" in "ADD TRMMAP".
None
None
The TRMMAP index is configured by setting the value of "TMI" in "ADD TRMMAP".
None
BSC6900
None
None
BSC6900
None
None
None
None
BSC6900
None
None
RNC
None
None
RNC
None
1. If the NodeB is configured with the NCP through "ADD NCP" or configured with the CCP through "ADD CCP", the transmission type cannot be modified. 2. If a NodeB OM channel is set up, the transmission type cannot be modified. 3. If the NodeB is configured with adjacent nodes through "ADD NCP", the transmission type cannot be modified. 4. If the NodeB is configured with the electrical serial number through "ADD NODEBESN" and the transmission type is supposed to be modified to ATM transmission, the transmission type cannot be modified. Read & Write
None
BSC6900
None
10 Cell
None
None
Transport channel
None
35 Cell
None
None
Transport channel
None
1 Cell
This paramter is valid only when "DynShutDownType" is set to ConditionalShutDown. Read & Write
None
BSC6900
None
D0
Cell
None
60 Board
None
67 Board
None
50 Board
None
62 Board
None
ON
Board
None
None
RAB
None
None
RNC
This parameter, "UserPriority", "THP", and "SPI" form an SPI mapping table. Read & Write
None
RNC
None
None
RNC
None
None
RNC
None
None
RNC
None
None
RNC
None
None
Cell
None
None
RNC
None
M3UA_LOADSHARE_M OD SCCP
None
1 Cell
None
10 NodeB
None
None
Adjacent node
When the value of "NODET" in "ADD ADJNODE" is set to IUB, IUR, IUCS, or IUPS, this parameter is valid. Read & Write
None
IP path
None
None
BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB, IUR, IUCS, this parameter is valid. Read & Write
None
BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB, IUR or IUCS, this parameter is valid. Read & Write
None
BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB, IUR or IUCS, this parameter is valid. Read & Write
Transport 0 channel
None
None
Physical channel
None
3 Cell
None
1 Cell
None
None
RAB
None
None
RAB
None
None
RAB
None
10 Cell
None
1 Cell
None
255 Cell
None
255 Cell
None
None
None
None
D160
RNC
None
D320
Cell
None
D1280
RNC
None
D640
Cell
None
D640
Cell
None
D640
Cell
None
D640
Cell
None
D640
Cell
None
D640
Cell
None
D320
Cell
None
D1280
Cell
None
D0
Cell
This parameter is valid when "InterRatReportMode" is set to EVENT_TRIGGER. Read & Write
D640
Cell
None
D240
RNC
None
D240
RNC
None
None
None
BSC6900
None
None
50 Cell
None
0 BSC6900
None
2 BSC6900
None
None
BSC6900
None
0 IMA group
None
0 UNI link
None
2 PPP link
None
2 None
None
0 None
None
None
RNC
This paramter is valid only when "CellChoice" is set to 3GCELL. Read & Write
None
None
None
None
None
None
Cell
None
None
E1/T1 port
None
None
E1/T1 port
None
None
PPP link
None
None
MP link
None
None
E1/T1 port
None
None
BSC6900
None
240 Cell
The value of the parameter must satisfy the function below: "NFastSpdEst"*"TSlowSp dEst" >= "NSlowSpdEst"*"TFastSp dEst". Read & Write This parameter is valid when "TstSwitch" is set to ON. Read & Write
None
None
OFF
RNC
None
None
IP path
None
None
When "GRPT" in "ADD RSCGRP" is set to ATM or "BWMODE" is set to FULL_DUPLEX, this parameter is valid;The sum of "TxBw" and "RxBw" in "ADD RSCGRP" of upper class RSCGRP can not less than the "TxBw" and "AllBw" in "ADD RSCGRP"of lower class RSCGRP;The "TxBw" in "ADD RSCGRP" of upper class RSCGRP can not less than the "TxBw" in "ADD RSCGRP" of lower class RSCGRP, and the "RxBw" in "ADD RSCGRP" of upper class RSCGRP can not less Transmission than the "RxBw" in "ADD resource RSCGRP" of lower class group RSCGRP. Read & Write
None
None
None
Cell
None
None
Cell
None
None
SAAL link
When the value of "CARRYT" is set to IMA, UNI, FRAATM, NCOPT, or ATMLOGICPORT, this parameter is valid. Read & Write
None
None
When the value of "CARRYT" in "ADD AAL2PATH" is set to UNI, IMA, FRAATM, NCOPT, or ATMLOGICPORT, this parameter is valid. Read & Write
None
IPoA PVC
None
None
BSC6900
None
ANY_ERR_RETURN
BSC6900
None
None
None
Cell
None
None
Cell
None
None
Cell
None
None
Cell
When "UARFCNUplinkInd" is set to TRUE, this parameter need to manual configure;or else need to automatic configure with the restriction relation UL and DL frequency. Read & Write
None
Cell
None
None
Cell
None
None
None
None
None
None
None
None
None
RNC
None
None
RNC
None
5000 RNC
None
5000 RNC
None
Guests
BSC6900
None
None
None
None
None
50 RNC
This parameter is valid only when "AFSetObj" is set to GOLD, SILVER, or COPPER. Read & Write
D320
Cell
None
D320
Cell
None
D320
Cell
None
D320
Cell
None
D240
Cell
None
10 RNC
This parameter is valid only when "AFSetObj" is set to GOLD, SILVER, or COPPER. Read & Write
D6
RNC
None
D8
RNC
If this parameter is set through both the "SET UFRCCHLTYPEPARA" and "ADD UCELLFRC" commands, the parameter set through the "ADD UCELLFRC" command takes precedence over that set through the "SET UFRCCHLTYPEPARA" command. Read & Write
D8
Cell
If this parameter is set through both the "SET UFRCCHLTYPEPARA" and "ADD UCELLFRC" commands, the parameter set through the "ADD UCELLFRC" command takes precedence over that set through the "SET UFRCCHLTYPEPARA" command. Read & Write
D64
RNC
This parameter can be used for selection of the initial rate for BE services only when the DCCC_SWITCH under the "Chswitch" parameter is set to on through the "SET CORRMALGOSWITCH" command. Read & Write
D608
RNC
None
D640
Cell
None
D1280
Cell
None
D2560
Cell
None
D1280
Cell
None
D240
Cell
None
5 RNC
None
0 Cell
None
83 Cell
The value of this parameter must satisfy the following relationship: "UlOlcTrigThd"(See "ADD UCELLLDM") >= "UlCellTotalThd"; "UlCellTotalThd" > "UlNonCtrlThdForHo" Read & Write
SF/2
NodeB
None
3 Cell
None
3 NodeB
None
3 Cell
None
3 NodeB
None
D64
RNC
When the value of "UlMidRateCalc" is HAND_APPOINT, the following relationship must be satisfied: "UlDcccRateThd" <= "UlMidRateThd".
SILENT
RAB
None
D64
Cell
This parameter is available if the value of "BEQosPerform" in "SET UQOSACT" is YES. Read & Write
D64
RNC
For the BE users with the same "TrafficClass", "THPClass" and "BearType" values, make sure: "UlGBR" of GOLD users ("UserPriority" is set to GOLD) >= "UlGBR" of SILVER users ("UserPriority" is set to SILVER) >= "UlGBR" of COPPER users ("UserPriority" is set to COPPER). Read & Write
SF16
Cell
The value of this parameter must satisfy the following relationship: "UlHoCeResvSf" >= "UlLdrCreditSfResThd". (For detailed information, refer to "ADD UCELLLDR".) Read & Write
0 Cell
None
SCHEDULED
RNC
None
10 RNC
This parameter is valid only when "AFSetObj" is set to GOLD, SILVER, or COPPER. Read & Write
200000 Cell
None
20 Cell
None
1 Cell
None
5 RNC
None
1 Cell
None
1 NodeB
None
SF8
Cell
SF8
NodeB
None
NoAct
Cell
None
NoAct
Cell
None
NoAct
NodeB
None
InterFreqLDHO
Cell
None
BERateRed
NodeB
None
NoAct
Cell
None
NoAct
NodeB
None
1 Cell
None
1 NodeB
None
45 Cell
The value of this parameter must satisfy the following relationship: "UlLdrTrigThd" >= "UlLdrRelThd"; "UlOlcRelThd" >= "UlLdrRelThd". Read & Write
BERateRed
Cell
None
NoAct
NodeB
None
NoAct
Cell
None
NoAct
Cell
None
NoAct
NodeB
None
NoAct
Cell
None
NoAct
NodeB
None
55 Cell
The value of this parameter must satisfy the following relationship: "UlLdrTrigThd" >= "UlLdrRelThd"; "UlOlcTrigThd" > "UlLdrTrigThd"; "UlNonCtrlThdForOther"( See "ADD UCELLCAC") >= "UlLdrTrigThd". Read & Write
D64
NodeB
None
D19
Cell
None
HAND_APPOINT
RNC
The parameter is valid when "UlRateUpAdjLevel" in "SET UDCCC" is set to 3_Rates, or "UlRateDnAdjLevel" in "SET UDCCC" is set to 3_Rates. Read & Write
D128
RNC
The parameter is valid when "UlMidRateCalc" in "SET UDCCC" is set to HAND_APPOINT, and the following relationship must be satisfied: "UlDcccRateThd" <= "UlMidRateThd". Read & Write
1000 RNC
The following relationship must be satisfied: "UlModeChangeTimerLen " <= "DlModeChangeTimerLen ". Read & Write
1000 RNC
The following relationship must be satisfied: "UlModeChangeTimerLen " <= "DlModeChangeTimerLen ". Read & Write
100 RNC
This parameter is valid only when "AFSetObj" is set to GOLD, SILVER, or COPPER. Read & Write
75 Cell
The value of this parameter must satisfy the following relationship: "UlNonCtrlThdForHo" > "UlNonCtrlThdForAMR"; "UlNonCtrlThdForAMR" > "UlNonCtrlThdForOther"; MAX("UlNonCtrlThdForH o", "UlNonCtrlThdForAMR", "UlNonCtrlThdForNonAM R", "UlNonCtrlThdForOther") > "UlLdrTrigThd" > "UlLdrRelThd" (For detailed information, refer to "ADD UCELLLDM"). Read & Write
80 Cell
The value of this parameter must satisfy the following relationship: "UlCellTotalThd" > "UlNonCtrlThdForHo" ; "UlNonCtrlThdForHo" > "UlNonCtrlThdForAMR"; "UlNonCtrlThdForHo" > "UlNonCtrlThdForNonAM R"; MAX("UlNonCtrlThdForH o", "UlNonCtrlThdForAMR", "UlNonCtrlThdForNonAM R", "UlNonCtrlThdForOther") > "UlLdrTrigThd" > "UlLdrRelThd" (For detailed information, refer to "ADD UCELLLDM"). Read & Write
75 Cell
The value of this parameter must satisfy the following relationship: "UlNonCtrlThdForHo" > "UlNonCtrlThdForNonAM R"; "UlNonCtrlThdForNonAM R" > "UlNonCtrlThdForOther"; MAX("UlNonCtrlThdForH o", "UlNonCtrlThdForAMR", "UlNonCtrlThdForNonAM R", "UlNonCtrlThdForOther") > "UlLdrTrigThd" > "UlLdrRelThd" (For detailed information, refer to "ADD UCELLLDM"). Read & Write
60 Cell
The value of this parameter must satisfy the following relationship: MAX("UlNonCtrlThdForH o", "UlNonCtrlThdForAMR", "UlNonCtrlThdForNonAM R", "UlNonCtrlThdForOther") > "UlLdrTrigThd" > "UlLdrRelThd" (For detailed information, refer to "ADD UCELLLDM"). Read & Write
5 RNC
None
3 Cell
None
3 Cell
None
D3
RNC
None
85 Cell
The value of this parameter must satisfy the following relationship: "UlOlcTrigThd" >= "UlOlcRelThd"; "UlOlcRelThd" >= "UlLdrRelThd". Read & Write
0 Cell
None
100 RNC
None
95 Cell
The value of this parameter must satisfy the following relationship: "UlOlcTrigThd" > "UlLdrTrigThd"; "UlOlcTrigThd" >= "UlOlcRelThd"; "UlOlcTrigThd" >= "UlNonCtrlThdForHo"(Se e "ADD UCELLCAC"). Read & Write
1 Cell
None
1 NodeB
None
1 Cell
None
1 NodeB
None
NO
RNC
NO
RNC
NO
RNC
20 Cell
None
NO
RNC
This parameter is valid when the "VPQosPerform" is set to YES. Read & Write
NO
RNC
NO
RNC
NO
RNC
3_Rates
RNC
None
3_Rates
RNC
None
D64
Cell
None
10 RNC
SCHEDULED
RNC
None
100 RNC
This parameter is valid only when "AFSetObj" is set to GGOLD, SILVER, or COPPER.
D256
RNC
None
NON-SCHEDULED
RNC
None
None
RNC
The following relationship must be satisfied: "UlThd6A1" <= "UlThd6B1". Read & Write
None
RNC
The following relationship must be satisfied: "UlThd6A2" <= "UlThd6B2"; "UlThd6A2" > "UlThd6B1". Read & Write
None
RNC
The following relationship must be satisfied: "UlThd6A1" <= "UlThd6B1"; "UlThd6A2" > "UlThd6B1". Read & Write
None
RNC
The following relationship must be satisfied: "UlThd6A2" <= "UlThd6B2". Read & Write
80 Cell
None
1 RNC
This parameter can only be set to 1 when the "PwrCtrlAlg" parameter is set to ALGORITHM2. Read & Write
D640
Cell
None
D640
Cell
None
D240
Cell
None
None
E1/T1 port
None
None
Cell
This parameter is valid when the "CellLocCfgType" is set to BOTH or CELL_CENTER. Read & Write
None
Cell
This parameter is valid when the "CellLocCfgType" is set to BOTH or CELL_CENTER. Read & Write
None
Cell
This parameter is valid when the "CellLocCfgType" is set to BOTH or CELL_CENTER. Read & Write
None
Cell
This parameter is valid when the "CellLocCfgType" is set to BOTH or CELL_CENTER. Read & Write
None
Cell
This parameter is valid when the "CellLocCfgType" is set to BOTH or CELL_CENTER. Read & Write
None
Cell
This parameter is valid when the "CellLocCfgType" is set to BOTH or CELL_CENTER. Read & Write
None
UNI link
None
2 RNC
The value of this parameter must be smaller than the value of the "RecountingPeriod" parameter under the "SET URNCMBMSPARA" command. Read & Write
None
Adjacent node
When the value of "IsROOTNODE" in "ADD ADJNODE" is set to NO, this parameter is valid. Read & Write
None
When "ISFIRSTCLASSE" Transmission in "ADD RSCGRP" is set resource to NO, this parameter is group valid. Read & Write
None
None
None
None
None
None
None
Cell
None
None
Cell
None
None
Cell
None
None
Cell
None
None
Cell
None
None
Cell
None
None
Cell
None
None
Cell
None
None
RNC
None
None
RNC
None
None
Cell
None
-12 Cell
None
-12 Cell
None
-92 Cell
None
-97 Cell
None
-12 Cell
This parameter is valid when the OVERLAY_SWITCH is ON. The OVERLAY_SWITCH is in "HoSwitch" in "SET CORRMALGOSWITCH". Read & Write
-13 Cell
This parameter is valid when the OVERLAY_SWITCH is ON and "MeasQuantityOf3A" is CPICH_EC/NO or AUTO. The OVERLAY_SWITCH is in "HoSwitch" in "SET CORRMALGOSWITCH". Read & Write
-92 Cell
This parameter is valid when the OVERLAY_SWITCH is ON. The OVERLAY_SWITCH is in "HoSwitch" in "SET CORRMALGOSWITCH". Read & Write
-107 Cell
This parameter is valid when the OVERLAY_SWITCH is ON and "MeasQuantityOf3A" is CPICH_RSCP or AUTO. The OVERLAY_SWITCH is in "HoSwitch" in "SET CORRMALGOSWITCH". Read & Write
CPICH_RSCP
Cell
This parameter is valid when "InterRatReportMode" in "SET UINTERRATHOCOV" or "ADD UCELLINTERRATHOCO V" is set to EVENT_TRIGGER. Read & Write
-12 Cell
None
-13 Cell
This parameter is valid when the "MeasQuantityOf3A" is CPICH_EC/NO or AUTO. Read & Write
-92 Cell
None
-107 Cell
None
RNC
None
Disable
BSC6900
None
NOT_USED
Cell
None
NOT_USED
Cell
None
ALL_USER
Cell
None
5 RNC
None
90 RNC
None
None
RNC
This parameter, "TrafficClass", "THP", and "SPI" form an SPI mapping table. Read & Write
None
RNC
None
None
RNC
None
None
RNC
None
None
BSC6900
None
None
PVC
None
None
None
When the value of "CARRYT" in "ADD AAL2PATH" is set to UNI, IMA, FRAATM, NCOPT, or ATMLOGICPORT, this parameter is valid. Read & Write
DISABLE
IP path
None
None
BSC6900
None
DISABLE
SCTP link
None
DISABLE
SCTP link
None
None
BSC6900
None
None
None
BSC6900
None
None
BSC6900
None
None
BSC6900
None
70 BSC6900
None
When the interface type is Iub, transmission type is ATM or dual stack, the parameter is RT_VBR; transmission type is IP or Hybrid IP, the parameter is EF. When the interface type is Iur, transmission type is ATM, the parameter is RT_VBR; When the interface type is Iu-CS, transmission type is ATM, the parameter is RT_VBR; transmission type is IP, the parameter is EF. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR or IUCS, this parameter is valid. Read & Write
100 BSC6900
None
When the interface type is Iub, transmission type is ATM or IP, the parameter is NULL; transmission type is dual stack, the parameter is EF; transmission type is Hybrid IP, the parameter is LQEF. When the interface type is Iur, transmission type is ATM or IP, the parameter is NULL. When the interface type is Iu-CS, transmission type is ATM or IP, the parameter is NULL. BSC6900
When the value of "ITFT" in "ADD TRMMAP" is set to IUB or IUR, this parameter is valid. Read & Write
0 BSC6900
None
70 BSC6900
None
DCH
RNC
None
EDCH_TTI_10ms
RNC
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
BSC6900
None
None
None
When the value of "CARRYT" in "ADD AAL2PATH" is set to UNI, IMA, FRAATM, NCOPT, or ATMLOGICPORT, this parameter is valid. Read & Write
FALSE
Cell
None
FALSE
Cell
None
NO
RNC
None
40 RNC
None
100 RNC
None
60 RNC
None
200 RNC
None
NOLIMIT
BSC6900
None
0 Cell
None
0 Cell
None
0 Cell
None
None
None
None
100(UNI), 256(NNI)
SAAL link
None
None
BSC6900
None
M3UA_ASP
SCCP
None
Active
BSC6900
None
None
E1/T1 port
None
None
Board
None
None
3 RNC
5 Board
None
50 Board
None
180 RNC
None
None
BSC6900
None
Interruption Scope
Interruption Duration(Min)
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Ethernet port
Interrupt the service until the correct gateway is set or the port swapping or the changing of IP route is finished.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
PPP link
BSC6900
BSC6900
BSC6900
PPP link
BSC6900
PPP link
BSC6900
Not involved
Not involved
Optical port
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Cell
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Cell
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
AAL2 path
IP path
SAAL link
The services are interrupted until the SAAL link is working normally.
AAL2 path
Not involved
Not involved
Not involved
Not involved
Not involved
SAAL link
The services are interrupted until the SAAL link is working normally.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
SAAL link
The services are interrupted until the SAAL link is working normally.
AAL2 path
Not involved
Not involved
Not involved
Not involved
Not involved
SAAL link
The services are interrupted until the SAAL link is working normally.
AAL2 path
SAAL link
The services are interrupted until the SAAL link is working normally.
SAAL link
The services are interrupted until the SAAL link is working normally.
AAL2 path
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
SAAL link
The services are interrupted until the SAAL link is working normally.
Not involved
Not involved
Not involved
SAAL link
The services are interrupted until the SAAL link is working normally.
BSC6900
SAAL link
The services are interrupted until the SAAL link is working normally.
BSC6900
The services will be interrupted if the setting of this parameter is inconsistent with the setting at the peer end.
SAAL link
The services are interrupted until the SAAL link is working normally.
AAL2 path
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Cell
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
SCTP link
The services are interrupted until the SCTP link is working normally.
SCTP link
The services are interrupted until the SCTP link is working normally.
SCTP link
The services are interrupted until the SCTP link is working normally.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Cell
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
BSC6900
Not involved
Not involved
Cell
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Cell
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
BSC6900
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
BSC6900
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Cell
Not involved
Not involved
Cell
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
BSC6900
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
PPP link
BSC6900
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Cell
Not involved
Not involved
Cell
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
Not involved
Not involved
BSC6900
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Cell
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Ethernet port
The loopback keeps interrupting the services until the loopback is cancelled.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
BSC6900
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
BSC6900
BSC6900
Not involved
Not involved
BSC6900
BSC6900
BSC6900
Not involved
Not involved
Not involved
Not involved
BSC6900
BSC6900
Not involved
Not involved
BSC6900
BSC6900
BSC6900
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Optical port
BSC6900
BSC6900
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
BSC6900
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
BSC6900
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Cell
Not involved
Not involved
SCTP link
The services are interrupted until the SCTP link is working normally.
SCTP link
The services are interrupted until the SCTP link is working normally.
Not involved
Not involved
SCTP link
The services are interrupted until the SCTP link is working normally.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
SCTP link
The services are interrupted until the SCTP link is working normally.
SCTP link
The services are interrupted until the SCTP link is working normally.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
E1/T1 port
When the peer end unconditionally changes the bits in the check message, the services will not resume unless the switch is set to OFF.
E1/T1 port
BSC6900
Not involved
Not involved
Not involved
Not involved
Not involved
IP path
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
IP path
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
SCTP link
The services are interrupted until the SCTP link is working normally.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
PPP link
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
PPP link
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Cell
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
SCTP link
The services are interrupted until the SCTP link is working normally.
Not involved
Not involved
Not involved
Not involved
Not involved
BSC6900
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
BSC6900
If the MTU configuration fails to meet the requirement of the network, the services will be adversely affected.
BSC6900
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Cell
Cell
Not involved
Not involved
SCTP link
The services are interrupted until the SCTP link is working normally.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
BSC6900
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
BSC6900
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Ethernet port
If the value is too big, will interrupt service until it is set to the normal value.
BSC6900
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
BSC6900
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
SCTP link
The services are interrupted until the SCTP link is working normally.
SCTP link
The services are interrupted until the SCTP link is working normally.
Not involved
Not involved
Not involved
BSC6900
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
SCTP link
The services are interrupted until the SCTP link is working normally.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
PPP link
BSC6900
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Ethernet port
The loopback keeps interrupting the services until the loopback is cancelled.
Ethernet port
The loopback keeps interrupting the services until the loopback is cancelled.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
BSC6900
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
Not involved Not involved Not involved Not involved Not involved
Not involved Not involved Not involved Not involved Not involved
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Cell
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
BSC6900
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
BSC6900
BSC6900
BSC6900
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
BSC6900
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
BSC6900
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
BSC6900
BSC6900
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
AAL2 path
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
BSC6900
BSC6900
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
BSC6900
Not involved
Not involved
BSC6900
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not Involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
BSC6900
BSC6900
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
BSC6900
Not involved
Not involved
Not involved
Not involved
Cell
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Cell
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
BSC6900
Cell
Not involved
Not involved
BSC6900
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
AAL2 path
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Cell
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Cell
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
AAL2 path
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
BSC6900
If the mode is not set back, will interrupt service until it is set back.
Not involved
Not involved
Cell
Not involved
Not involved
Cell
Not involved
Not involved
Cell
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
AAL2 path
IP path
Not involved
Not involved
SCTP link
Not involved The services are interrupted until the SCTP link is working normally. The services are interrupted until the SCTP link is working normally.
SCTP link
BSC6900
If the mode is not set back, will interrupt service until it is set back.
Not involved
Not involved
Not involved
BSC6900
If the mode is not set back, will interrupt service until it is set back.
BSC6900
If the mode is not set back, will interrupt service until it is set back.
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
AAL2 path
Not involved
Not involved
Cell
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
N (No impact on the UE in idle mode) N (No impact on the UE in idle mode)
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
BSC6900
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Not involved
Caution
Validation of Modification
None
None
None
None
None
None
None
None
None
Not involved
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
None
Not involved
None
None
Not involved
None
Not involved
None
Not involved
None
None
None
If the value is set too small, the UEs on the cell edge cannot receive the acquisition indication properly. This problem affects the coverage of the downlink common channel and furthermore the coverage of the cell. If the value is set too great, it causes interference to other channels, occupies the The parameter modification has no downlink transmit power, and affects the cell impact on the equipment. capacity.
Not involved
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
None
None
At the early stage of network construction, or when the traffic model of subscribers in a cell is not fixed, the parameter can be set to Automatic to have the HSDPA channel codes be automatically allocated. If the traffic model of subscribers in a cell is fixed and known, the parameter can be set to Manual to select the static allocation mode. Manual allocation leads to restriction of The parameter modification has no HSDPA code resource or leaves HSDPA impact on the equipment. code resource idle.
Not involved
None
Not involved
None
None
None
None
None
None
None
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
The longer the UL AMRC timer is, the less frequently the AMRC mode is adjusted. In addition, the response to measurement reports becomes slower accordingly.
Not involved
None
None
The adjacent node ID must be The parameter modification has no configured. impact on the equipment. None The parameter modification has no None impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
None
Not involved
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
To modify this parameter, run "STP GATEWAYC HK" first and then "STR GATEWAYC The parameter modification has no HK". impact on the equipment. None
To modify this parameter, run "STP GATEWAYC HK" first and then "STR GATEWAYC The parameter modification has no HK". impact on the equipment. None
None
None
If the transmission type of Node is IUB-ATM, [next hop IP address] must be the peer IP address of the configured The parameter modification has no IPoA PVC. impact on the equipment. None
If the transmission type of Node is IUB-ATM, [next hop IP address] must be the peer IP address of the configured The parameter modification has no IPOA PVC. impact on the equipment. None
None
Not involved
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
Negotiation can succeed only when the configuration is consistent on the local and peer The parameter modification has no ends. impact on the equipment. None Negotiation can succeed only when the configuration is consistent on the local and peer The parameter modification has no ends. impact on the equipment. None Negotiation can succeed only when the configuration is consistent on the local and peer The parameter modification has no ends. impact on the equipment. None Negotiation can succeed only when the configuration is consistent on the local and peer The parameter modification has no ends. impact on the equipment. None
Negotiation can succeed only when the configuration is consistent on the local and peer The parameter modification has no ends. impact on the equipment. None Negotiation can succeed only when the configuration is consistent on the local and peer The parameter modification has no ends. impact on the equipment. None Negotiation can succeed only when the configuration is consistent on the local and peer The parameter modification has no ends. impact on the equipment. None Negotiation can succeed only when the configuration is consistent on the local and peer The parameter modification has no ends. impact on the equipment. None
The port can be set to the DOWN or UP state when this parameter is modified. If the negotiation modes on the local and peer end are not consistent, the service can be The parameter modification has no interrupted. impact on the equipment. None The parameter modification has no None impact on the equipment. None
None
If the mode is not consistent, will interrupt service until it The parameter modification has no is consistent. impact on the equipment. None
None
None
None
None
Not involved
None
None
None
None
None
None
Each backplane board 8K clock has only one clock source. You are not allowed to turn on the same backplane board 8K clock switch for multiple interface The parameter modification has no boards. impact on the equipment. None Each backplane board 8K clock has only one clock source. You are not allowed to turn on the same backplane board 8K clock switch for multiple interface The parameter modification has no boards. impact on the equipment. None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
To modify this parameter, run "STP GATEWAYC HK" first and then "STR GATEWAYC The parameter modification has no HK". impact on the equipment. None
To modify this parameter, run "STP GATEWAYC HK" first and then "STR GATEWAYC The parameter modification has no HK". impact on the equipment. None
None
None
The cell should be deactivated in The cell should be activated after advance. the parameter modification.
None
None
None
None
None
None
None
If the value is set too small, the UEs on the cell edge cannot receive the system messages properly. This problem affects the coverage of the downlink common channel and furthermore the coverage of the cell. If the value is set too great, it causes interference to other channels, The parameter modification has no occupies the downlink transmit power, and impact on the equipment. affects the cell capacity.
Not involved
None
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
None
Not involved
If the value of this parameter is too low, whether the UE is in the stable low activity state cannot be determined. If the value of this parameter is too high, the dedicated channel resources are wasted. This parameter should be set on the basis of the BE service model.
None
Not involved
If the value of this parameter is too low, whether the UE is in the stable low activity state cannot be determined. If the value of this parameter is too high, the dedicated channel resources are wasted. This parameter should be set on the basis of the BE service model.
None
Not involved
If the value of this parameter is too low, whether the UE is in the stable low activity state cannot be determined. If the value of this parameter is too high, the dedicated channel resources are wasted. This parameter should be set on the basis of the BE service model.
None
Not involved
If the value of this parameter is too low, whether the UE is in the stable low activity state cannot be determined. If the value of this parameter is too high, the dedicated channel resources are wasted. This parameter should be set on the basis of the BE service model.
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
If the value of this parameter is too low, whether the UE is in the stable low activity state cannot be determined. If the value of this parameter is too high, the dedicated channel resources are wasted. This parameter should be set on the basis of the BE service model.
None
Not involved
If the value of this parameter is too high, congestion may occur over the common channel.
None
Not involved
If the value of this parameter is too high, the period of reporting 4A event is delayed and congestion may occur over the common channel.
None
Not involved
If the value of this parameter is too high, congestion may occur over the common channel.
None
Not involved
If the value of this parameter is too high, the period of reporting 4A event is delayed and congestion may occur over the common channel.
None
Not involved
If the value of this parameter is too high, congestion may occur over the common channel.
None
Not involved
If the value of this parameter is too high, the period of reporting 4A event is delayed and congestion may occur over the common channel.
None
Not involved
If the value of this parameter is too high, congestion may occur over the common channel.
None
Not involved
If the value of this parameter is too high, the period of reporting 4A event is delayed and congestion may occur over the common channel.
None
Not involved
If the value of this parameter is too high, congestion may occur over the common channel.
None
Not involved
If the value of this parameter is too high, the period of reporting 4A event is delayed and congestion may occur over the common channel.
None
Not involved
If the value of this parameter is too high, congestion may occur over the common channel.
None
Not involved
If the value of this parameter is too high, the period of reporting 4A event is delayed and congestion may occur over the common channel.
None
Not involved
If the value of this parameter is too high, congestion may occur over the common channel.
None
Not involved
If the value of this parameter is too high, the period of reporting 4A event is delayed and congestion may occur over the common channel.
None
Not involved
If the value of this parameter is too high, congestion may occur over the common channel.
None
Not involved
If the value of this parameter is too high, the period of reporting 4A event is delayed and congestion may occur over the common channel.
When this parameter is set to 65535, it is regarded that the state transition from FACH or E_FACH to PCH is not performed. Not involved
If the value of this parameter is too low, whether the UE is in the stable low activity state cannot be determined. If the value of this parameter is too high, the common channel resources are wasted. This parameter should be set on the basis of the BE service model.
None
Not involved
If the value of this parameter is too low, whether the UE is in the stable low activity state cannot be determined. If the value of this parameter is too high, the dedicated channel resources are wasted. This parameter should be set on the basis of the BE service model.
None
Not involved
If the value of this parameter is too low, whether the UE is in the stable low activity state cannot be determined. If the value of this parameter is too high, the dedicated channel resources are wasted. This parameter should be set on the basis of the BE service model.
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
Not involved
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
To disable the alarm blink filter function, set this parameter to "0". To enable the alarm blink filter function, set this parameter to a value greater than 0 and turn on the alarm blink filter switch. See "SET ALMBLKSW" for setting the alarm blink The parameter modification has no filter switch. impact on the equipment. None To enable the alarm blink filter function, set "Alarm switch of blinking filter" and "Switch of stat blinking alarm" to The parameter modification has no "ENABLE". impact on the equipment. None
None
The modification of the timer involves the peer end. For details, see ITU-T Q2630.1 or ITU-T The parameter modification has no Q2630.2. impact on the equipment. None
Not involved
None
None
None
None
None
None
Not involved
None
None
None
None
None
None
None
None
None
If certain link is occupied, conversion from E1 to T1 or from T1 to E1 cannot be The parameter modification has no performed. impact on the equipment. None The parameter modification has no impact on the equipment. None
None The parameter cannot be modified. The parameter cannot be modified. The parameter cannot be modified.
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
None
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
None
None
None
None
None
None
None
None
None
None
The FRAATM link must be The parameter modification has no available. impact on the equipment. None
Not involved
None
None
The IMA group must be available. None The parameter cannot be modified.
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Not involved
None
Not involved
None
None
The port must The parameter modification has no be available. impact on the equipment. None
Not involved
None
None
None
None When the bearing type is modified, the new bearing type must be configured.
None
None The parameter cannot be modified. The parameter cannot be modified. The parameter cannot be modified.
Not involved
None
Not involved
None
Not involved
None
None
The UNI link must be available. None The parameter cannot be modified.
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Not involved
None
The configuration data must be the same as that of the The parameter modification has no peer system. impact on the equipment. None
None
The configuration data must be the same as that of the The parameter modification has no peer system. impact on the equipment. None
None
None
None
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
Not involved
None
None
None
1. Cell ID is in one-to-one corresponden ce with Service Area Identity (SAI). 2. SAI = PLMN + LAC + SAC. PLMNId (Public Land Mobile Network Identity) is configured through the command "ADD UCNOPERA TOR" and LAC (Location Area Code) is configured through the command "ADD UCELLSETU P". LAC of CBS is the same as that of CS/PS. This parameter is SAC. 3. SAC of CBS is Not involved This parameter cannot be modified.
None
Not involved
None
None
After running the "ADD UCBSADDR" command to add the CBS server address, you should not set this parameter to ON; After setting this parameter to ON, you should not run the "ADD UCBSADDR" command to add the CBS server address. The RNC built-in CBS function is available when this parameter is set to ON. When using this function, set the main control CPU ID of the CBS function by referring to "ADD Not involved
None
None
None
None
The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None
The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None The parameter cannot be modified.
Not involved
None
The modification of the parameter does not affect the established SAAL link, but affect the next establishment of the SAAL The parameter modification has no link. impact on the equipment. None The parameter cannot be modified.
Not involved
None
None
None
Not involved
None
None
Not involved
None
None
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
None
Not involved
None
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
None
None
Not involved
None
None
None
None
Not involved
None
None
None
None
Not involved
None
None
Not involved
None
None
The lower the code resource LDR trigger threshold is, the easier the downlink code resource enters the initial congestion status, the easier the LDR action is triggered, and the easier the subscriber perception is affected. But a lower code resource LDR trigger threshold causes a higher admission The parameter modification has no success rate because the resource is impact on the equipment. reserved.
None
Not involved
None
None
None
When the cell breathing algorithm is activated, if the value is too small, the physical coverage of the cell is limited so as to avoid cell capacity waste. If the value is too great, the physical coverage is The parameter modification has no expanded and interference over other cells impact on the equipment. is increased.
None
Not involved
None
None
Not involved
None
None
None
None
None
None
None
When the cell breathing algorithm is activated, if the value is too small, the physical coverage of the cell is limited so as to avoid cell capacity waste. If the value is too great, the physical coverage is The parameter modification has no expanded and interference over other cells impact on the equipment. is increased.
None
None
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
None
The cell should be deactivated in The cell should be activated after advance. the parameter modification.
None
None
Not involved
None
None
None
None
None
None
Not involved
None
If the value of the parameter is set to 0, channel retry cannot be performed. Not involved
None
Not involved
None
When the network status is poor, the check count should not be too small. Otherwise, the path state The parameter modification has no is affected. impact on the equipment. None This parameter cannot be modified.
Not involved
None
Not involved
None
None
The checksum mode need the negotiation with the peer. According to the RFC4960, the value should be set The parameter modification has no to CRC32. impact on the equipment. None The checksum mode need the negotiation with the peer. According to the RFC4960, the value should be set The parameter modification has no to CRC32. impact on the equipment. None
None
Not involved
None
None
None
None
None
None
None
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
Not involved
None
None
None
None
The larger the value of the parameter is, the easier it is to be handed over to the GSM network. The smaller the value of the The parameter modification has no parameter is, the harder it is to be handed impact on the equipment. over to the GSM network.
The cell should be deactivated in The cell should be activated after advance. the parameter modification.
The larger the sum, the higher the handover priority of the neighboring cell. The smaller the sum, the lower the handover priority of the neighboring cell. Usually it is configured to 0. The larger the parameter, the easier of the handover to the neighboring cell. The smaller the parameter, the harder the handover to the neighboring cell.
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
If you want to modify the value of "Clock board type" from "GCGa" to "GCUa", the board must not be configured The board should be reset to with GPS. validate the parameter modification. None
None
The cell should be deactivated in The cell should be activated after advance. the parameter modification.
None
None
None
None
Not involved
None
None
Not involved
None
None
None
None
None
Not involved
None
Not involved
None
Not involved
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
Not involved
None
None
Not involved
None
Not involved
None
None None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
Not involved
None
Not involved
None
None
None
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
When the IuFlex function is used, the protocol version of each CN node must be R5 or later.The parameter modification has no impact on the equipment. Not involved
None
None
None
1. If you set "Upper count threshold of raised fault" and "Lower count threshold of raised fault" to "0", the accumulated number of blink times for the alarm is counted but not reported. 2. If "Upper count threshold of raised fault" is not "0", the value of "Lower count threshold of raised fault" cannot be "0" and you must ensure that "Upper count threshold of raised fault" is greater than "Lower count threshold of raised fault". The parameter modification has no 3. When impact on the equipment. None
1. If you set "Upper count threshold of raised fault" and "Lower count threshold of raised fault" to "0", the accumulated number of blink times for the alarm is counted but not reported. 2. If "Lower count threshold of raised fault" is not 0, the value of "Upper count threshold of raised fault" cannot be 0 and you must ensure that "Lower count threshold of raised fault" is smaller than "Upper count threshold of raised fault". The parameter modification has no 3. When impact on the equipment. None
None
None
None
None
None
None
None
None
None
When the value is TRUE, users can be selected for inter-frequency handover during code resource congestion, which can easily release code congestion and use multiThe parameter modification has no frequency resources. However, the risk of impact on the equipment. inter-frequency blink handover increases.
None
Not involved
None
Not involved
None
None
None
None
Not involved
None
None
None
Not involved
None
None
For the modification of the parameter, see the ITU-T The parameter modification has no Q.2110. impact on the equipment. None
For the modification of the parameter, see the ITU-T The parameter modification has no Q.2110. impact on the equipment. None
For the modification of the parameter, see the ITU-T The parameter modification has no Q.2110. impact on the equipment. None
This parameter can be added and modified. It cannot be The parameter modification has no deleted. impact on the equipment. None
This parameter can be added and modified. It cannot be The parameter modification has no deleted. impact on the equipment. None
This parameter can be added and modified. It cannot be The parameter modification has no deleted. impact on the equipment. None
This parameter can be added and modified. It cannot be The parameter modification has no deleted. impact on the equipment. None
This parameter can be added and modified. It cannot be The parameter modification has no deleted. impact on the equipment. None
This parameter can be added and modified. It cannot be The parameter modification has no deleted. impact on the equipment. None
This parameter can be added and modified. It cannot be The parameter modification has no deleted. impact on the equipment. None
This parameter can be added and modified. It cannot be The parameter modification has no deleted. impact on the equipment. None
This parameter can be added and modified. It cannot be The parameter modification has no deleted. impact on the equipment. None
This parameter can be added and modified. It cannot be The parameter modification has no deleted. impact on the equipment. None
This parameter can be added and modified. It cannot be The parameter modification has no deleted. impact on the equipment. None
This parameter can be added and modified. It cannot be The parameter modification has no deleted. impact on the equipment. None
None
None
None
None
None
None
None
None
None
None
None
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
None
None
Not involved
None
Not involved
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
The cell should be deactivated in The cell should be activated after advance. the parameter modification.
None
None
None
Before enabling load sharing, you need to set the "RNC_SHAR E_SWITCH" switch in "SET URRCTRLS WITCH" to ON.The parameter modification has no impact on the equipment. Not involved
None
None
None
None
None
None
None
None
None
None
The modification of the parameter affects the adjacent node that is configured with the factor table. After the successful modification, the parameter takes effect in the following two cases: 1. New access subscriber. 2. Bandwidth modification of the existing The parameter modification has no subscriber impact on the equipment. None
The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None
The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None
The modification of the parameter affects the adjacent node that is configured with the factor table. After the successful modification, the parameter takes effect in the following two cases: 1. New access subscriber. 2. Bandwidth modification of the existing The parameter modification has no subscriber impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
The settings of CsInfoUpdFla g is valid only when the value of "CsNriCfgMo de" in "SET UOPERATO RCFGPARA" is set to SUPP_IUFLE X or SUPP_IUFLE X_MOCN.Th e parameter modification has no impact on the equipment. Not involved The settings of CsInfoUpdTm r is valid only when the value of "CsInfoUpdFl ag" in "SET UOPERATO RCFGPARA" is set to ON.The parameter modification has no impact on the equipment. Not involved
None
None
When "CNProtclVer" in "ADD UCNNODE" is set to R5 or any later version, CsNriCfgMod e may be set to SUPP_IUFLE X.The parameter modification has no impact on the equipment. When "CNProtclVer" in "ADD UCNNODE" is set to R6 or any later version, CsNriCfgMod e may be set to SUPP_MOC N or SUPP_IUFLE X_MOCN.Th e parameter modification has no impact on the Not involved
None
The settings of CSNRILength is valid only when the value of "CsNriCfgMo de" in "SET UOPERATO RCFGPARA" is set to SUPP_IUFLE X, SUPP_MOC N or SUPP_IUFLE X_MOCN.Th e parameter modification has no impact on the equipment. Not involved
None
None
None
None
The modification of the parameter affects the adjacent node that is configured with the factor table. After the successful modification, the parameter takes effect in the following two cases: 1. New access subscriber. 2. Bandwidth modification of the existing The parameter modification has no subscriber impact on the equipment. None The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None The modification of the parameter affects the adjacent node that is configured with the factor table. After the successful modification, the parameter takes effect in the following two cases: 1. New access subscriber. 2. Bandwidth modification of the existing The parameter modification has no subscriber impact on the equipment. None
None
Not involved
None
None
None
None
None
None
Not involved
None
None
Not involved
None
Not involved
None
None
None
None
None
Not involved
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
None None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
Not involved
None
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
None
None
Not involved
None
None
None
If the line delay is great and the maximum delay is too small, certain links cannot The parameter modification has no be activated. impact on the equipment. None
None
None
None
None
None
None
Not involved
None
None
None
Not involved
None
When running this command, the source IP address and the destination IP address cannot be the local IP address and the peer IP address configured for The parameter modification has no the IPPATH. impact on the equipment. None
The parameter cannot be modified. The parameter cannot be modified. The parameter cannot be modified.
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
None
None
Not involved
None
None
None
None
None
None
None
None
Not involved
None
None
None
None
None
None
None
None
None
Not involved
None
None
Not involved
None
None
None
If the value is too high the system load after admission may be over large, which impacts system stability and leads to system congestion. If the value is too low, the The parameter modification has no possibility of user rejects may increase, impact on the equipment. resulting in waste in idle resources.
None
None
None
If the value is too high the system load after admission may be over large, which impacts system stability and leads to system congestion. If the value is too low, the possibility of user rejects may increase, The parameter modification has no resulting in waste in idle resources and the impact on the equipment. failure to achieving network planning target.
None
If the value is too high the system load after admission may be over large, which impacts system stability and leads to system congestion. If the value is too low, the possibility of user rejects may increase, resulting in waste in idle resource and the The parameter modification has no failure to achieving the network planning impact on the equipment. target.
None
None
None
None
None
Not involved
None
None
Not involved
None
None
None
The backer position the value is in {SF4,SF8,SF16,SF32,SF64,SF128,SF256,S FOFF}, the less code and credit resources reserved for handover UEs. The possibility of rejecting handover UE admissions increases and performance of UEs cannot be guaranteed. The more frontal position the value is, the more the possibility of The parameter modification has no rejecting new UEs is and some idle impact on the equipment. resources are wasted.
None
If the value is too high the system load after admission may be over large, which impacts system stability and leads to system congestion. If the value is too low, the The parameter modification has no possibility of user rejects may increase, impact on the equipment. resulting in waste in idle resources.
None
None
The parameter modification has no impact on the equipment. None The higher the parameter is, the higher the service rate of the user in handover is, and the more obviously the cell load is decreased. However, high value of the parameter gives rise to the fluctuation and congestion of the target cell load. The lower the parameter is, the smaller amplitude of the load decreases as a result of the interfrequency load handover, and the easier it is The parameter modification has no to maintain the stability of the target cell impact on the equipment. load.
None
None
None
None
None
None
None
The lower the parameter value is, the easier the credit enters the congestion status, the easier the LDR action is triggered, and the easier the user experience is affected. A lower code resource LDR trigger threshold, however, causes a higher admission success rate because the resource is The parameter modification has no reserved. The parameter should be set impact on the equipment. based on the operator's requirement.
None
None
None
None
None
None
None
None
None
None
None
None
The lower the LDR trigger and release thresholds are, the easier the system enters the preliminary congestion status, the harder it is released from this status, the easier the LDR action is triggered, and the more likely the users are affected. But, the admission success rate becomes higher since the resources are preserved. The The parameter modification has no carrier shall make a trade-off between these impact on the equipment. factors.
None
None
None
None
None
None
None
None
None
The lower the LDR trigger and release thresholds are, the easier the system enters the preliminary congestion status, the harder it is released from this status, the easier the LDR action is triggered, and the more likely the users are affected. But, the admission success rate becomes higher since the resources are preserved. The The parameter modification has no carrier shall make a trade-off between these impact on the equipment. factors.
None
None
None
None
Not involved
The greater the filtering coefficient is, the greater the smoothing effect is and the less the random interference is. Yet the response to changes of the measured value becomes slower.
None
Not involved
None
None
Not involved
None
If the TFO/TrFO is not configured, it is recommende d that the timer should be set to 3000ms. If the TFO/TrFO is configured, it is recommende d that the timer should be set to 7000 ms to complete the adjustment of DL AMR speech rate. Not involved
None
If the TFO/TrFO is not configured, it is recommende d that the timer should be set to 3000ms. If the TFO/TrFO is configured, it is recommende d that the timer should be set to 7000 ms to complete the adjustment of DL AMR speech rate. Not involved
None
None
None
None
None
None
None
The lower the OLC trigger threshold is, the easier the system is in the overload status. An excessively low value of the OLC trigger threshold is very detrimental to the system performance. The lower the OLC release The parameter modification has no threshold is, the harder the system releases impact on the equipment. the overload.
None
None
None
The lower the OLC trigger threshold is, the easier the system is in the overload status. An excessively low value of the OLC trigger threshold is very detrimental to the system performance. The lower the OLC release The parameter modification has no threshold is, the harder the system releases impact on the equipment. the overload.
None
If the value is too high the system load after admission may be over large, which impacts system stability and leads to system congestion. If the value is too low, the possibility of user rejects may increase, The parameter modification has no resulting in waste in idle resources and the impact on the equipment. failure to achieving network planning target.
None
None
None
None
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
None
Not involved
None
None
Not involved
None
None
The larger the value of the parameter is, the more easily event 2B, inter-frequency handover based on Qos, and event 3A, interRAT handover based on Qos, can be triggered, and thus the more timely the The parameter modification has no handover to the target cell can be impact on the equipment. performed.
None
None
None
None
None
None
None
Not involved
The higher the value of this parameter is, the lower the absolute threshold is. In this case, there are greater possibilities of meeting the requirement for lowering the AMR speech rate. Thus, it is easier to lower the AMR speech rate.
None
Not involved
The higher the value of this parameter is, the lower the absolute threshold is. In this case, there are greater possibilities of meeting the requirement for lowering the wideband AMR speech rate. Thus, it is easier to lower the wideband AMR speech rate.
None
Not involved
The higher the value of this parameter is, the lower the absolute threshold is. In this case, there are less possibilities of meeting the requirement for stopping AMR speech rate adjustment. Thus, it is easier to lower the AMR speech rate.
None
Not involved
The higher the value of this parameter is, the lower the absolute threshold is. In this case, there are less possibilities of meeting the requirement for stopping wideband AMR speech rate adjustment. Thus, it is easier to lower the wideband AMR speech rate.
None
Not involved
The higher the value of this parameter is, the lower the absolute threshold is. In this case, there are less possibilities of meeting the requirement for raising the AMR speech rate. Thus, it is more difficult to raise the AMR speech rate.
None
Not involved
The higher the value of this parameter is, the lower the absolute threshold is. In this case, there are less possibilities of meeting the requirement for raising the wideband AMR speech rate. Thus, it is more difficult to raise the wideband AMR speech rate.
None
Not involved
The higher the value of this parameter is, the lower the absolute threshold is. In this case, there are greater possibilities of meeting the requirement for stopping AMR speech rate increase. Thus, it is more difficult to raise the AMR speech rate.
None
Not involved
The higher the value of this parameter is, the lower the absolute threshold is. In this case, there are greater possibilities of meeting the requirement for stopping wideband AMR speech rate increase. Thus, it is more difficult to raise the wideband AMR speech rate.
None
If the value is too high, the system load after admission may be over large, which impacts system stability and leads to system congestion. If the value is too low, the The parameter modification has no possibility of user rejects may increase, impact on the equipment. resulting in waste in idle resources.
None None
Not involved None The parameter modification has no impact on the equipment. None
None None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
None
Not involved
None
None
The cell should be deactivated in The cell should be activated after advance. the parameter modification.
None
None
The cell should be deactivated in The cell should be activated after advance. the parameter modification.
None
None
The parameter cannot be modified. The parameter cannot be modified. The parameter cannot be modified.
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
None
None
Not involved
None
None
Not involved
None
None
None
None
Not involved
None
This parameter can be added and modified. It cannot be The parameter modification has no deleted. impact on the equipment. None
This parameter can be added and modified. It cannot be The parameter modification has no deleted. impact on the equipment. None
This parameter can be added and modified. It cannot be The parameter modification has no deleted. impact on the equipment. None
This parameter can be added and modified. It cannot be The parameter modification has no deleted. impact on the equipment. None
This parameter can be added and modified. It cannot be The parameter modification has no deleted. impact on the equipment. None
This parameter can be added and modified. It cannot be The parameter modification has no deleted. impact on the equipment. None
None
Not involved
None
None
None
Not involved
None
None
None
Not involved
None
None
None
The priority of the signaling link should be The parameter modification has no the highest. impact on the equipment. None
Not involved
None
The existing networking can be affected when the relation between the VLAN and the DSCP are The parameter modification has no reset. impact on the equipment. None
Not involved
None
Not involved
None
Not involved
None
None
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
It is used for interworking with products of other manufacturer The parameter modification has no s. impact on the equipment. None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
If the parameter value is set too high, the downlink codes are wasted. If the parameter value is set too low, the uplink throughput of the HSUPA is restricted.
None
Not involved
None
None
Not involved
None
None
None
None
Not involved
None
None
Not involved
None
None
None
None
None
None
None
1. If you set the start date or end date of daylight saving time (DST) to a day of the week after a specific date, the specific date must be six days or more days prior to the last day of the month. For example, the last day of October is the 31st day. Then, the specific date cannot be later than the 25th (31 6) day. If you set the specific date to Tuesday after 26 October, this date is not included in the November of The parameter modification has no 2005. impact on the equipment. None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
Not involved
None
None
None
None
None
None
None
The modification of the parameter affects the adjacent node that is configured with the factor table. After the successful modification, the parameter takes effect in the following two cases: 1. New access subscriber. 2. Bandwidth modification of the existing The parameter modification has no subscriber impact on the equipment. None
None
None
None
None
None
None
For the modification of the parameter, See the ITU- The parameter modification has no T Q704. impact on the equipment. None
None
Not involved
None
None
None
None
None
None
None
Not involved
None
None
None
None
None
None
None
Not involved
None
Not involved
None
None
None
If the parameter value is set too high, the downlink codes are wasted. If the parameter value is set too low, the uplink throughput of the HSUPA is restricted.
None
None
None
The modification of the timer involves the peer end. For details, see ITU-T Q2630.1 or ITU-T The parameter modification has no Q2630.2. impact on the equipment. None
The modification of the timer involves the peer end. For details, see ITU-T Q2630.1 or ITU-T The parameter modification has no Q2630.2. impact on the equipment. None The parameter modification has no None impact on the equipment. None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
Not involved
None
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
None
None
None
None
None
None
None
Not involved
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
None
None
None
None
None
Not involved
None
None
Not involved
If the value of this parameter is too high, congestion may occur over the common channel.
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
None
Not involved
None
Not involved
None
Negotiation can succeed only when the configuration is consistent on the local and peer The parameter modification has no ends. impact on the equipment. None Negotiation can succeed only when the configuration is consistent on the local and peer The parameter modification has no ends. impact on the equipment. None Flow control function can be affected if this parameter is The parameter modification has no modified. impact on the equipment. None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None The parameter cannot be modified. Negotiation fails if this parameter is modified. Negotiation fails if this parameter is modified.
Not involved
None
None
None
None
The cell should be deactivated in The cell should be activated after advance. the parameter modification.
None
None
The cell should be deactivated in The cell should be activated after advance. the parameter modification.
None
None
None
None
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
None
None
None
None
None
None
None
None None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Not involved None The parameter modification has no impact on the equipment. None
Negotiation can succeed only when the configuration is consistent on the local and peer The parameter modification has no ends. impact on the equipment. None Negotiation can succeed only when the configuration is consistent on the local and peer The parameter modification has no ends. impact on the equipment. None flow control function can be affected if this parameter is The parameter modification has no modified. impact on the equipment. None The parameter modification has no impact on the equipment. None
Not involved
None
In "EXP ELABEL", the "FN" parameter cannot be a space or any of the following characters: '@', '#', '!', '%', '^', '&', '*', '[', The parameter modification has no ']', '\'', '\\'. impact on the equipment. None
None None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
None
Not involved
None
The adjacent node ID must be The parameter modification has no configured. impact on the equipment. None No_HC: disable the header compression function; RTP/UDP/IP_ HC: enable the RTP/UDP/IP/ The parameter modification has no PPP function impact on the equipment. None
Not involved
None
None
None
None
None
None
The FACTORTAB LE must be The parameter modification has no configured. impact on the equipment. None
Not involved
None
None
None
None
None None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
None
None
Not involved
None
The modification of the parameter affects the adjacent node that is configured with the factor table. After the successful modification, the parameter takes effect in the following two cases: 1. New access subscriber. 2. Bandwidth modification of the existing The parameter modification has no subscriber impact on the equipment. None The modification of the parameter affects the adjacent node that is configured with the factor table. After the successful modification, the parameter takes effect in the following two cases: 1. New access subscriber. 2. Bandwidth modification of the existing The parameter modification has no subscriber impact on the equipment. None
This parameter determines whether to load data from the OMU or the FLASH when the BSC6900 or the board is restarted. The equipment is The parameter modification has no affected. impact on the equipment. None
None
Not involved
None
None
Not involved
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
Not involved
None
Not involved
None
None
None
Not involved
None
None
None
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
Not involved
None
None
None
None
None
Not involved
None
None
None
None
The modification of the parameter affects the adjacent node that is configured with the factor table. After the successful modification, the parameter takes effect in the following two cases: 1. New access subscriber. 2. Bandwidth modification of the existing The parameter modification has no subscriber impact on the equipment. None The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None The modification of the parameter affects the adjacent node that is configured with the factor table. After the successful modification, the parameter takes effect in the following two cases: 1. New access subscriber. 2. Bandwidth modification of the existing The parameter modification has no subscriber impact on the equipment. None
The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None
The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None
The modification of the parameter affects the adjacent node that is configured with the factor table. After the successful modification, the parameter takes effect in the following two cases: 1. New access subscriber. 2. Bandwidth modification of the existing The parameter modification has no subscriber impact on the equipment. None The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None The modification of the parameter affects the adjacent node that is configured with the factor table. After the successful modification, the parameter takes effect in the following two cases: 1. New access subscriber. 2. Bandwidth modification of the existing The parameter modification has no subscriber impact on the equipment. None
The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None
The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None
The modification of the parameter affects the adjacent node that is configured with the factor table. After the successful modification, the parameter takes effect in the following two cases: 1. New access subscriber. 2. Bandwidth modification of the existing The parameter modification has no subscriber impact on the equipment. None The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None The modification of the parameter affects the adjacent node that is configured with the factor table. After the successful modification, the parameter takes effect in the following two cases: 1. New access subscriber. 2. Bandwidth modification of the existing The parameter modification has no subscriber impact on the equipment. None
The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None
The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None
If the parameter is modified, the transport layer bandwidth admission of the subsequence access service is The parameter modification has no affected. impact on the equipment. None The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None The parameter cannot be modified.
Not involved
None
None
Not involved
None
Not involved
None
Not involved
None
None
None
Not involved
None
None
Not involved
None
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
None
Not involved
None
None
None
Not involved
None
Not involved
None
None
None
If the value is too high, admission requirement of the HSDPA BE service is strict, which improves the service quality of the HSDPA BE service but also may lead to HSDPA capacity waste. If the value is too low, admission requirement of the HSDPA BE service is loose, which allows more BE The parameter modification has no services but QoS of the HSDPA BE service impact on the equipment. cannot be guaranteed.
None
None
None
None
None
None
Not involved
None
None
Not involved
None
None
None
If the value is too high, admission requirement of the HSDPA streaming service is strict, which improves the service quality of the HSDPA streaming service but also may lead to HSDPA capacity waste. If the value is too low, admission requirement of the HSDPA streaming service is loose, which allows more HSDPA streaming The parameter modification has no services but QoS of the HSDPA streaming impact on the equipment. service cannot be guaranteed.
None
None
None
None
None
None
None
None
None
None
Not involved
None
None
None
None
None
If the parameter value is set too low, the total HSPA power will be too low, thus impacting the throughput of HSDPA subscribers at the border of a cell.
None
None
None
None
None
None
If the parameter value is set too low, the HSDPA code resources are restricted and the HSDPA performance is affect. If the parameter value is set too high, the HSDPA code resources are wasted, thus increasing the admission rejection rate of R99 services.
None
None
None
None
None
If the parameter value is unreasonable, the CQI in some scenarios will exceed the range of 0 to 30. As a result, the NodeB MAC-hs cannot schedule the subscriber in the corresponding time or cannot schedule multiple subscribers with the difference of channel conditions.
None
The cell should be deactivated in The cell should be activated after advance. the parameter modification.
None
Not involved
None
None
In the scenarios like outdoor macro cells with power restricted, it is less likely to schedule multiple subscribers simultaneously, so two HS-SCCHs are configured. In the scenarios like indoor pico with code restricted, it is more likely to schedule multiple subscribers simultaneously, so four HS-SCCHs are configured. If excessive HS-SCCHs are configured, the code resource is wasted. If insufficient HS-SCCHs are configured, the HS-PDSCH code resource or power resource is wasted. Both affect the cell throughput rate.
None
None
None
None
None
None
Not involved
None
None
None
None
None
Not involved
None
None
If this value is too high, the possibility of rejecting HSUPA schedule services increases, which impacts access success rate. If the value is too low, too many HSUPA schedule users may be admitted, The parameter modification has no which impacts the admitted users and impact on the equipment. results in overload and system congestion.
None
If this value is too high, the possibility of rejecting HSUPA schedule services increases, which impacts access success rate. If the value is too low, too many HSUPA schedule users may be admitted, which impacts the admitted users and The parameter modification has no results in overload and system impact on the equipment. congestionRecommended.
None
None
None
If this value is too high, the possibility of rejecting HSUPA schedule services increases, which impacts access success rate. If the value is too low, too many HSUPA schedule users may be admitted, The parameter modification has no which impacts the admitted users and impact on the equipment. results in overload and system congestion.
None
None
Not involved
None
None
Not involved
None
None
None
None
None
None
The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None The modification of the parameter affects the adjacent node that is configured with the factor table. After the successful modification, the parameter takes effect in the following two cases: 1. New access subscriber. 2. Bandwidth modification of the existing The parameter modification has no subscriber impact on the equipment. None
The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None
The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None
The modification of the parameter affects the adjacent node that is configured with the factor table. After the successful modification, the parameter takes effect in the following two cases: 1. New access subscriber. 2. Bandwidth modification of the existing The parameter modification has no subscriber impact on the equipment. None If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None The modification of the parameter affects the adjacent node that is configured with the factor table. After the successful modification, the parameter takes effect in the following two cases: 1. New access subscriber. 2. Bandwidth modification of the existing The parameter modification has no subscriber impact on the equipment. None
The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None The parameter modification has no None impact on the equipment. None
None
None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None
Not involved
None
The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None
The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None
The modification of the parameter affects the adjacent node that is configured with the factor table. After the successful modification, the parameter takes effect in the following two cases: 1. New access subscriber. 2. Bandwidth modification of the existing The parameter modification has no subscriber impact on the equipment. None The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None The modification of the parameter affects the adjacent node that is configured with the factor table. After the successful modification, the parameter takes effect in the following two cases: 1. New access subscriber. 2. Bandwidth modification of the existing The parameter modification has no subscriber impact on the equipment. None
The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None
The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None
The modification of the parameter affects the adjacent node that is configured with the factor table. After the successful modification, the parameter takes effect in the following two cases: 1. New access subscriber. 2. Bandwidth modification of the existing The parameter modification has no subscriber impact on the equipment. None The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None The modification of the parameter affects the adjacent node that is configured with the factor table. After the successful modification, the parameter takes effect in the following two cases: 1. New access subscriber. 2. Bandwidth modification of the existing The parameter modification has no subscriber impact on the equipment. None
Not involved
None
Not involved
None
None
None
For the UE that enters the SHO area, increase of the hysteresis means decrease of the SHO area. But for the UE that leaves the SHO area, that means enlarging of the SHO area. If the number of UEs entering the area and the number of UEs leaving the area are equal, the real SHO ratio will not be affected. The larger the value of this parameter, the stronger the capability of resisting signal fluctuation. Thus, the pingpong effect can be resisted, but the varying The parameter modification has no of the signal in response to the handover impact on the equipment. algorithm becomes slower.
None
For the UE that enters the SHO area, increase of the hysteresis means decrease of the SHO area. But for the UE that leaves the SHO area, that means enlarging of the SHO area. If the number of UEs entering the area and the number of UEs leaving the area are equal, the real SHO ratio will not be affected. The larger the value of this parameter, the stronger the capability of resisting signal fluctuation. Thus, the pingpong effect can be resisted, but the varying The parameter modification has no of the signal in response to the handover impact on the equipment. algorithm becomes slower.
None
For the UE that enters the SHO area, increase of the hysteresis means decrease of the SHO area. But for the UE that leaves the SHO area, that means enlarging of the SHO area. If the number of UEs entering the area and the number of UEs leaving the area are equal, the real SHO ratio will not be affected. The larger the value of this parameter, the stronger the capability of resisting signal fluctuation. Thus, the pingpong effect can be resisted, but the varying The parameter modification has no of the signal in response to the handover impact on the equipment. algorithm becomes slower.
None
None
For the UE that enters the SHO area, increase of the hysteresis means decrease of the SHO area. But for the UE that leaves the SHO area, that means enlarging of the SHO area. If the number of UEs entering the area and the number of UEs leaving the area are equal, the real SHO ratio will not be affected. The larger the value of this parameter, the stronger the capability of resisting signal fluctuation. Thus, the pingpong effect can be resisted, but the varying The parameter modification has no of the signal in response to the handover impact on the equipment. algorithm becomes slower.
None
None
None
None
None
None
None
None
None
None
For details of the timer, see ITU-T Q.714. The modification is not recommende The parameter modification has no d. impact on the equipment. None
For details of the timer, see ITU-T Q.714. The modification is not recommende The parameter modification has no d. impact on the equipment. None When the network status is poor, the packet length should not be too large. Otherwise, the path state The parameter modification has no is affected. impact on the equipment. None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
None
None
None
None
The larger the value of the parameter, the lower the probability of selecting neighboring The parameter modification has no cells. The smaller the value the parameter, impact on the equipment. the higher the probability of doing so.
None
The larger the value of the parameter, the lower the probability of selecting neighboring The parameter modification has no cells. The smaller the value the parameter, impact on the equipment. the higher the probability of doing so.
None
None
None
The modification of the parameter does not affect the established SAAL link, but affect the next establishment of the SAAL The parameter modification has no link. impact on the equipment. None
None
The parameter value of IgorTmr must be less than the value of "IntrTmr" set in "SET UIUTIMERAN DNUM".The parameter modification has no impact on the equipment. Not involved
None
None
Not involved
None
IMA ID identifies an IMA group. Normally, in the same interface board, IMA ID must be unique. To avoid using the same IMA ID allocated on the peer NodeB, use different IMA ID on the BSC6900 side and the The parameter modification has no NodeB. impact on the equipment. None
Not involved
None
The IMA protocol version must be consistent with that on The parameter modification has no the peer. impact on the equipment. None
None
None
Not involved
None
Not involved
None
None
Not involved
None
Not involved
None
None
None
None
None None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
For the modification of the parameter, see the ITU-T The parameter modification has no Q.2110. impact on the equipment. None
None
Not involved
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
If the Inter RAT Inter Plmn Ho Allowed is switched off,Neighbor cells belonging to different PLMNs in the inter RAT should be removed. Not involved
None
If the Intra RAT Inter Plmn Ho Allowed is switched off,Neighbor cells belonging to different PLMNs in the intra RAT should be removed. Not involved
None
None
None
None
None
None
None
None
None
None
Not involved
None
None
None
Not involved
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. None The greater the value of this parameter is, the more easily the event 1A is triggered.
None
Not involved
None
None
None
The parameter modification has no impact on the equipment. None The lower the value of this parameter is, the more easily the event 1B is triggered.
None
Not involved
None
None
None
The parameter value of IntrTmr must be greater than the value of "IgorTmr" set in "SET UIUTIMERAN DNUM".The parameter modific ation has no impact on the equipment. Not involved
None
None
None
None
Not involved
None
None
The parameter cannot be modified. The parameter cannot be modified. The parameter cannot be modified.
Not involved
None
Not involved
None
Not involved
None
The parameter cannot be modified. The parameter cannot be modified. The parameter cannot be modified.
Not involved
None
Not involved
None
Not involved
None
None
Negotiation can succeed only when the configuration is consistent on the local and peer The parameter modification has no ends. impact on the equipment. None No_HC: disable the header compression function; RTP/UDP/IP_ HC: enable the RTP/UDP/IP/ The parameter modification has no PPP function impact on the equipment. None
Not involved
None
Not involved
None
If the transmission type of Node is IUB-ATM, [next hop IP address] must be the peer IP address of the configured IPOA PVC. If the transmission type of Node is IUB-IP, [next hop IP address] must be set as follows: the peer IP address of the PPP link, the peer IP address of the MP group, and the IP address in same network segment as the FE/GE The parameter modification has no port. impact on the equipment. None
If the transmission type of Node is IUB-IP, [next hop IP address] must be set as follows: the peer IP address of the PPP link, the peer IP address of the MP group, and the IP address in same network segment as the FE/GE The parameter modification has no port. impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
The IP address of the NodeB cannot use the configured IP address of another NodeB. The IP address of NodeB cannot be the same as the IP address configured in the BSC6900. Otherwise, operation and maintenance The parameter modification has no channel fails. impact on the equipment. None
Not involved
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
Not involved
None
None
None
The parameter IPPATH must be configured The parameter modification has no in advance. impact on the equipment. None
Not involved
None
None
Not involved
None
None
None
None
None
Not involved
None
None
None
None
Not involved
None
None
Not involved
None
None
None
None
None
None
None
Not involved
None
None
None
None
None
None
None
Not involved
None
None
Not involved
None
None
None
None
None
None
None
Not involved
None
None
None
The setting of this parameter must be consistent with that on The parameter modification has no the peer. impact on the equipment. None
The setting of this parameter must be consistent with that on The parameter modification has no the peer. impact on the equipment. None
None
The setting of this parameter must be consistent with that on The parameter modification has no the peer. impact on the equipment. None
The setting of this parameter must be consistent with that on The parameter modification has no the peer. impact on the equipment. None The setting of this parameter must be consistent with that on The parameter modification has no the peer. impact on the equipment. None
None
None
The setting of this parameter must be consistent with that on The parameter modification has no the peer. impact on the equipment. None
The setting of this parameter must be consistent with that on The parameter modification has no the peer. impact on the equipment. None
None
The setting of this parameter must be consistent with that on The parameter modification has no the peer. impact on the equipment. None
The setting of this parameter must be consistent with that on The parameter modification has no the peer. impact on the equipment. None The setting of this parameter must be consistent with that on The parameter modification has no the peer. impact on the equipment. None It is used for interworking with products of other manufacturer The parameter modification has no s. impact on the equipment. None
None
1. This command is applicable to the boards AOUa, POUa, AOUc, POUc, and OIUa. 2. It is used for interworking with products of other manufacturer The parameter modification has no s. impact on the equipment. None
None
1. This command is applicable to the boards AOUa and POUa. 2. It is used for interworking with products of other manufacturer The parameter modification has no s. impact on the equipment. None
The setting of this parameter must be negotiated with that on the interconnecte The parameter modification has no d side. impact on the equipment. None The setting of this parameter must be negotiated with that on the interconnecte The parameter modification has no d side. impact on the equipment. None
None
The modification of the parameter affects the detection sensitivity of The parameter modification has no the SAAL link. impact on the equipment. None
None
Not involved
None
None
Not involved
None
None
Not involved
None
Not involved
None
Not involved
None
None
None
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Not involved
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
The smaller this parameter value, the easier it is to find the qualified target cell for blind handover. Excessively small values of the parameter, however makes the target cell easily enters the congestion status. The higher the parameter value, the more difficult it is for the inter-frequency blind The parameter modification has no handover occurs, and the easier it is to impact on the equipment. guarantee the stability of the target cell.
None
None
None
None
None
Not involved
None
Not involved
None
None
None None The parameter cannot be modified. The parameter cannot be modified.
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Not involved
None
Not involved
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
Not involved
None
None
None
Not involved
None
None
None
The setting of this parameter must be consistent with that on The parameter modification has no the peer. impact on the equipment. None
Not involved
None
According to the MTP3 load sharing principle, the link selection mask must be set properly. If the value is not set properly, the load sharing between MTP3 links The parameter modification has no may fail. impact on the equipment. None
The mask is calculated according to the link set to a destination The parameter modification has no entity. impact on the equipment. None The VCL loopback test can affect the service on The parameter modification has no this VCL. impact on the equipment. None
None
None
Not involved
None
The local IP address and peer IP must be configured in the same network segment. The peer IP address cannot be the same with the local IP address of The parameter modification has no the BSC6900. impact on the equipment. None The parameter cannot be modified.
Not involved
None
The cell should be deactivated in The cell should be activated after advance. the parameter modification.
None
None
The both end address of the SCTP is the parameter for the interconnectio n. The value can be modified after the negotiation with the peer The parameter modification has no system. impact on the equipment. None
The both end address of the SCTP is the parameter for the interconnectio n. The value can be modified after the negotiation with the peer The parameter modification has no system. impact on the equipment. None
None
The parameter can be modified when "MODE" in the command "ADD SCTPLNK" is The parameter modification has no set to Client. impact on the equipment. None
None
None
None
None
It is valid when "LOGPORTF LAG[/PARA in the command "ADD SCTPLNK" is The parameter modification has no ON. impact on the equipment. None It is valid when "LOGPORTF LAG[/PARA in the command "ADD SCTPLNK" is The parameter modification has no ON. impact on the equipment. None
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
Not involved
None
Not involved
None
1. When the peer end unconditionall y changes the bits in the check message, the services are disrupted if the switch is set to ON. 2. When the switch is set to OFF, the alarm "Inconsistent Configuration s at the Two Ends of the Link over the Ater Interface" will not be The parameter modification has no reported. impact on the equipment. None
If this parameter is set to REMOTE_LO OP and LOCAL_LOO P, the service on this link is affected until the loopback is cancelled. When the upper layer bearer is IMAGRP, IMAGRP is reset after the loopback is canceled. Otherwise, the state of the IMAGRP is abnormal and upper layer service cannot be The parameter modification has no established. impact on the equipment. None
When the loopback type is changed to REMOTE_LO OP or LOCAL_LOO P, the service is affected. The service becomes normal when the loopback test is canceled. When the loopback type is set to LOCAL_LOO P, you cannot directly change it to REMOTE_LO OP. You must change it to NO_LOOP first and then to REMOTE_LO OP. You can change the loopback type from REMOTE_LO OP to The parameter modification has no LOCAL_LOO impact on the equipment. None
None
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
None
Not involved
None
None
None
None
Not involved
None
Not involved
None
None
None
None
None
None The parameter cannot be modified. The parameter cannot be modified. The parameter cannot be modified.
Not involved
None
Not involved
None
Not involved
None
The parameter modification should be negotiated with the peer end, and the BSC6900 should be reset after the modification. It is recommende d that this parameter should not be modified when the system is The BSC6900 should be reset to running. validate the parameter modification. None
None
None
None
None
Not involved
None
Not involved
None
Not involved
None
None
Not involved
None
Not involved
None
Not involved
None
None
Not involved
None
Not involved
None
None
None
None
None
Not involved
None
None
Not involved
None
The value should be greater than "MAXPATHR ETR" in the command "ADD The parameter modification has no SCTPLNK". impact on the equipment. None
None
None
None
None
None
None
None
For the modification of the parameter, see the ITU-T The parameter modification has no Q.2110. impact on the equipment. None
Not involved
None
None
Not involved
None
None
None
None
The parameter modification has no impact on the equipment. None If MaxFachPower is excessively low, the UE at the cell verge fails to receive correctly the services and signaling borne over the FACH, resulting in the influence on the downlink common channel coverage and the cell coverage. If MaxFachPower is excessively high, other channels are interfered, the downlink power resources are occupied, and consequently the cell capacity is influenced.
This parameter cannot be modified. The adjacent Not involved node ID must be The parameter modification has no configured. impact on the equipment. None
None
Not involved
None
None
If the value is too low, the cell HSDPA capacity may be reduces, leading to waste The parameter modification has no in HSDPA resources. If the value is too impact on the equipment. high, HSDPA services may be congested.
None
If the value is too high, HSUPA services may be congested. If the value is too low, The parameter modification has no the cell HSDPA capacity may be reduces, impact on the equipment. leading to waste in HSUPA resources.
None
None
The value of this parameter cannot be smaller than the maximum PPPMUX subframe length. The number sub-frame must be larger than 2 to enable the The parameter modification has no PPPMUX. impact on the equipment. None
None
None
For the modification of the parameter, see the ITU-T The parameter modification has no Q.2110. impact on the equipment. None
None
The value should be smaller than "MAXASSOC RETR" in the command "ADD The parameter modification has no SCTPLNK". impact on the equipment. None
None
For the modification of the parameter, see the ITU-T The parameter modification has no Q.2110. impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
None
If the PPP frame length is larger than this value, PPPMUX multiplexing cannot be performed. The value of this parameter cannot be larger than the maximum multiplexing frame length wMuxMfl and the number sub-frame must be larger than 2 as the enabling condition of PPPMUX (the relation between the maximum sub-frame length and the maximum multiplexing frame length is: The parameter modification has no MuxMaxSfL< impact on the equipment. None
None
If the parameter value is set too low, the cell throughput will be too low. If the parameter value is set too high, it will bring much interference.
Before performing single-point positioning, you need to remove GPS configuration history The parameter modification has no records. impact on the equipment. None The parameter cannot be modified.
Not involved
None
None
The parameter modification has no impact on the equipment. It is configured in the network planning.
None
The larger the value of this parameter is, the wider the coverage of the corresponding services will be. When the downlink coverage is exceeded, the uplink coverage and downlink coverage of the service will become unbalanced. If the values of these parameters are too small, the uplink The parameter modification has no coverage will probably be smaller than the impact on the equipment. downlink coverage of the service.
None
The larger the value of this parameter is, the wider the coverage of the corresponding services will be. When the downlink coverage is exceeded, the uplink coverage and downlink coverage of the service will become unbalanced. If the values of these parameters are too small, the uplink The parameter modification has no coverage will probably be smaller than the impact on the equipment. downlink coverage of the service.
None
The larger the value of this parameter is, the wider the coverage of the corresponding services will be. When the downlink coverage is exceeded, the uplink coverage and downlink coverage of the service will become unbalanced. If the values of these parameters are too small, the uplink The parameter modification has no coverage will probably be smaller than the impact on the equipment. downlink coverage of the service.
None
The larger the value of this parameter is, the wider the coverage of the corresponding services will be. When the downlink coverage is exceeded, the uplink coverage and downlink coverage of the service will become unbalanced. If the values of these parameters are too small, the uplink The parameter modification has no coverage will probably be smaller than the impact on the equipment. downlink coverage of the service.
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
None
Not involved
None
Not involved
None
None
The modification of the parameter affects the adjacent node that is configured with the factor table. After the successful modification, the parameter takes effect in the following two cases: 1. New access subscriber. 2. Bandwidth modification of the existing The parameter modification has no subscriber impact on the equipment. None This parameter cannot be modified.
Not involved
None
None
The lower the parameter value is, the bigger the scope for selecting the MBMS services is, the more cell load is decreased, the more effect there is on the MBMS service. At the same time, the cell overload is significantly decreased while the impact on the MBMS services becomes bigger. The higher the parameter value is, the smaller the scope for selecting the MBMS services is, the less cell load is decreased, the more effect there is on the MBMS services, and the quality of The parameter modification has no services with high priority, however, can be impact on the equipment. guaranteed.
If the "ADD UMBMSALA RMSERVICE " specified service has no data on the Iu interface within the period specified by this parameter, an alarm is reported.The parameter modification has no impact on the equipment. Not involved
None
Not involved
None
Not involved
None
None
None
None
None
It is a waste of uplink resources if the uplink bandwidth of an MBMS service in PTP The parameter modification has no mode is high. Therefore, it is recommended impact on the equipment. the default value be used.
Not involved
None
Not involved
None
None
None
Not involved
None
None
None
None
None
None
None
Not involved
None
None
None
Not involved
None
None
None
None
None
Not involved
None
Not involved
None
Not involved
None
None
Not involved
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Not involved
None
None
the higher of the success ratio of the MBMS The parameter modification has no paging. However, more cell power impact on the equipment. resources are occupied.
None
Not involved
None
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
None
None
None
None
None
None
None
Not involved
None
None
The parameter modification has no If MinPCPICHPower is excessively small, impact on the equipment. the cell coverage is affected.
Not involved
None
To modify this parameter, run "STP GATEWAYC HK" first and then "STR GATEWAYC The parameter modification has no HK". impact on the equipment. None
Not involved
None
Not involved
None
None
The cell should be deactivated in The cell should be activated after advance. the parameter modification.
If the parameter value is excessively low, the UE access success rate is affected. If the parameter value is excessively high, the UE probably tries the access attempt repeatedly within a long time, which increases the uplink interference.
Not involved
None
None
None
Not involved
None
None Not involved If the RAN Sharing Support and MOCN Support are both switched off,Redundan t operators should be removed by "RMV UCNOPERA TOR" and only one operator can exist. Not involved
None
None
None
The local end of the SCTP link is the server and the application type is NBAP, the working mode should not be modified as the client. For the SCTP link of the M3UA application, the working mode can be modified only when the upper layer application is The parameter modification has no deleted. impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
The setting of this parameter must be negotiated with that on the interconnecte The parameter modification has no d side. impact on the equipment. None
Not involved
None
The modification of the timer involves the peer end. For details, see ITU-T Q2630.1 or ITU-T The parameter modification has no Q2630.2. impact on the equipment. None
The modification of the timer involves the peer end. For details, see ITU-T Q2630.1 or ITU-T The parameter modification has no Q2630.2. impact on the equipment. None
None
None
Not involved
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
The modification of the management proving status does not affect the established SAAL link, but affect the SAAL link establishment The parameter modification has no mode. impact on the equipment. None
None
None
None
None
None
This parameter supports only ASCII code character set.The parameter modification has no impact on the equipment. Not involved
None
1. Set this parameter to ON if you want to use the RNC builtin cell broadcast function. 2. Do not set this parameter to ON when the RNC is connected to the CBS server. 3. The parameter modification has no impact on the equipment. Not involved
None
Not involved
None
None
None
None
Not involved
A larger value of this parameter leads to a larger guaranteed coverage area of the MBMS service in the case of heavy load in the cell.
Not involved
A larger value of this parameter leads to a larger guaranteed coverage area of the MBMS service in the case of heavy load in the cell.
None
None
None
None
None
None
Not involved
None
None
The interconnectio n may be affected if this parameter is The parameter modification has no modified. impact on the equipment. None
The interconnectio n may be affected if this parameter is The parameter modification has no modified. impact on the equipment. None Negotiation can succeed only when the configuration is consistent on the local and peer The parameter modification has no ends. impact on the equipment. None Negotiation can succeed only when the configuration is consistent on the local and peer The parameter modification has no ends. impact on the equipment. None The adjacent node ID must be The parameter modification has no configured. impact on the equipment. None
Not involved
None
For the modification of the parameter, see the ITU-T The parameter modification has no Q.2110. impact on the equipment. None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
None
None
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
None
None
The cell should be deactivated in The cell should be activated after advance. the parameter modification.
None
The cell should be deactivated in The cell should be activated after advance. the parameter modification.
None
None
The parameter modification should be negotiated with the peer end, and the BSC6900 should be reset after the modification. It is recommende d that this parameter should not be modified when the system is The BSC6900 should be reset to running. validate the parameter modification. None
If the transmission type of Node is IUB-ATM, [next hop IP address] must be the peer IP address of the configured The parameter modification has no IPOA PVC. impact on the equipment. None
If the transmission type of Node is IUB-ATM, [next hop IP address] must be the peer IP address of the configured The parameter modification has no IPoA PVC. impact on the equipment. None
None
The IP address of the NodeB cannot use the configured IP address of another NodeB. The IP address of NodeB cannot be the same as the IP address configured in the BSC6900. Otherwise, operation and maintenance channel fails. The IP address of the NodeB cannot use the configured IP address of another NodeB. The IP address of NodeB cannot be the same as the IP address configured in the BSC6900. Otherwise, operation and maintenance channel fails.
The NodeB must be configured with the electronic serial number during The parameter modification has no modification. impact on the equipment. None
The NodeB must be configured with the electronic serial number during The parameter modification has no modification. impact on the equipment. None
None
None
None
None
None
None
None
Not involved
None
None
None
None
None
None
None
Not involved
None
None
None
A larger value of this parameter leads to a higher probability of using PTP transmission on the network. Power control is available for PTP transmission, and thus the power consumption in PTP mode is lower than that in PTM mode. In PTP mode, however, the quantities of code, CE, and other transmission resources increase with the number of users. Therefore, the setting of this parameter should take into consideration various resources, especially bottleneck resources of operators. The The parameter modification has no value of this parameter should not be too impact on the equipment. large.
None
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Not involved
None
Not involved
None
Not involved
None
None
The higher the value is, the stricter the synchronization process becomes, and the more difficult the synchronization occurs. The lower the value is, the easier the synchronization occurs. If the link quality is poor, a simple synchronization requirement The parameter modification has no leads to waste of the UE power and impact on the equipment. increase of uplink interference.
None
Not involved
None
When the value of "CsNriCfgMo de" in "SET UOPERATO RCFGPARA" is set to ON, or the value of "PsNriCfgMo de" in "SET UOPERATO RCFGPARA" is set to SUPP_IUFLE X, SUPP_MOC N or SUPP_IUFLE X_MOCN, the settings of NNSfTmr is valid.The parameter modification has no impact on the equipment. Not involved
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
None
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
None
None
None
None
Not involved
None
None
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
None
Not involved
None
Not involved
None
Before modifying the NodeB to a version of R4 or earlier, deactivate the HSUPA and HSDPA functions of this NodeB. Before modifying the NodeB to a version of R5 or earlier, deactivate the MBMS function of the NodeB.Befor e modifying the NodeB to a version of R6 or earlier, deactivate the EFACH function of The parameter modification has no the NodeB. impact on the equipment. None The parameter cannot be modified. The parameter cannot be modified.
Not involved
None
Not involved
None
Not involved
None
Not involved
None
The parameter cannot be modified. The parameter cannot be modified. This parameter cannot be modified.
Not involved
None
Not involved
None
Not involved
None
None
None
Not involved
None
None
None
None
If the parameter value is set too low, the power of the non-serving radio link will be low and the data rate on non-serving E-DCH will be reduced, thus impacting the transport rate of the UE in soft handover state. If the parameter value is too high, the non-serving The parameter modification has no RL cannot send RG to the UE even in impact on the equipment. overloaded situation.
None
If the value is excessively high, the link outof-sync decision is likely to happen. If the value is excessively low, out-of-sync is not likely to happen. But if the link quality is The parameter modification has no poor, it may result in a waste of the UE impact on the equipment. power and increased uplink interference.
None
None
None
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
None
When the value of "CsNriCfgMo de" in "SET UOPERATO RCFGPARA" is set to SUPP_IUFLE X or SUPP_IUFLE X_MOCN, or the value of "PsNriCfgMo de" in "SET UOPERATO RCFGPARA" is set to SUPP_IUFLE X or SUPP_IUFLE X_MOCN, NullNRI must be configured.Th e parameter modification has no impact on the equipment. Not involved
None
None
None
If this parameter is set to a larger value, the bandwidth of the service is The parameter modification has no smaller. impact on the equipment. None Negotiation can succeed only when the configuration is consistent on the local and peer The parameter modification has no ends. impact on the equipment. None Negotiation can succeed only when the configuration is consistent on the local and peer The parameter modification has no ends. impact on the equipment. None
None
Not involved
None
The transmission priority of the service is affected if the queue DSCP value of the port is The parameter modification has no modified. impact on the equipment. None The transmission priority of the service is affected if the queue DSCP value of the port is The parameter modification has no modified. impact on the equipment. None
None
None
None
None
None
None
None
None
None
None
None
Not involved
None
None
None
None
Not involved
None
The setting of this parameter must be consistent with that on The parameter modification has no the peer. impact on the equipment. None
None
Not involved
None
None
None
Not involved
None
None
Not involved
None
Not involved
None
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Not involved
None
Not involved
None
Not involved
None
The parameter IPPATH must be configured The parameter modification has no in advance. impact on the equipment. None The parameter cannot be modified. None
Not involved None The parameter modification has no impact on the equipment. None
Not involved
None
None
None
If the value is set too small, the UEs on the cell edge cannot receive the paging message properly. This problem affects the coverage of the downlink common channel and furthermore the coverage of the cell. If the value is set too great, it causes interference to other channels, occupies the The parameter modification has no downlink transmit power, and affects the cell impact on the equipment. capacity.
None
If the maximum transmit power of the PCPICH is configured too large, the cell capacity will be decreased because a lot of system resources will be occupied and the The parameter modification has no interference with the downlink traffic impact on the equipment. channels will be increased.
If the value is too great, the cell pilot may change fiercely, which is easy to lead to user call drops. If the value is too small, the cell pilot may change smoothly. However, the response speed of the cell breathing The parameter modification has no algorithm is decreased, impacting the impact on the equipment. algorithm performance.
Not involved
None
None
Not involved
None
None
None
Not involved
None
The local IP address and peer IP must be configured in the same network segment. The peer IP address cannot be the same with the local IP address of The parameter modification has no the BSC6900. impact on the equipment. None The parameter cannot be modified. The parameter cannot be modified.
Not involved
None
Not involved
None
The both end address of the SCTP is the parameter for the interconnectio n. The value can be modified after the negotiation with the peer The parameter modification has no system. impact on the equipment. None
The both end address of the SCTP is the parameter for the interconnectio n. The value can be modified after the negotiation with the peer The parameter modification has no system. impact on the equipment. None
Not involved
None
None
Not involved
None
None
None
Not involved
None
The parameter modification has no None impact on the equipment. None The SCTP port number is the parameter for the negotiation. The value can be modified after the negotiation with the peer The parameter modification has no system. impact on the equipment. None
None
None
None
None
None
None
None
None
None
None
None
When the network status is poor, the check period should not be too small. Otherwise, the path state The parameter modification has no is affected. impact on the equipment. None
None
None
None
None
None
None
None
None
Not involved
None
Not involved
None
The adjacent node ID must be The parameter modification has no configured. impact on the equipment. None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified.
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
If the value is set too small, the UEs on the cell edge cannot receive the paging indication properly. This problem may cause a misoperation of reading the PCH, waste the battery of the UE, affect the coverage of the downlink common channel, and finally affect the cell coverage. If the value is too great, it causes interference to other The parameter modification has no channels, occupies the downlink transmit impact on the equipment. power, and affects the cell capacity.
Not involved
None
None
None
Not involved
None
Not involved None The parameter modification has no impact on the equipment. None
Not involved
None
Not involved
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
Not involved
None
None
None
None
When the loopback type is changed to REMOTE_LO OP or LOCAL_LOO P, the service is affected. The service becomes normal when the loopback test is canceled. When the loopback type is set to LOCAL_LOO P, you cannot directly change it to REMOTE_LO OP. You must change it to NO_LOOP first and then to REMOTE_LO OP. You can change the loopback type from REMOTE_LO OP to The parameter modification has no LOCAL_LOO impact on the equipment. None The parameter modification has no impact on the equipment. None
Not involved
None
1. This command is applicable to the boards AOUa and POUa. 2. It is used for interworking with products of other manufacturer The parameter modification has no s. impact on the equipment. None
The parameter cannot be modified. The parameter cannot be modified. The parameter cannot be modified.
Not involved
None
Not involved
None
Not involved
None
Not involved
None
None
None
None
The modification of the parameter does not affect the established SAAL link, but affect the next establishment of the SAAL The parameter modification has no link. impact on the equipment. None
None
This parameter can be added and modified. It cannot be The parameter modification has no deleted. impact on the equipment. None
Not involved The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment. The parameter modification has no impact on the equipment.
None None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Not involved
If the value is excessively low, the uplink interference may increase, and the uplink capacity may be affected. If the value is excessively high, coverage may be affected.
None
If the value of Power increase step is too large, the access procedure will be shortened, but it is more likely to cause power waste. If it is too small, the access procedure will be lengthened, but transmit power will be saved. This parameter must be set carefully. In addition, the higher the parameter value is, the smaller impact The parameter modification has no ConstantValue has on the network impact on the equipment. performance.
Not involved
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
ENABLE: the multiplexing frame function of the PPP link is enabled. DISABLE: the multiplexing frame function of the PPP link The parameter modification has no is disabled. impact on the equipment. None
This parameter can be added or modified but cannot be The parameter modification has no removed. impact on the equipment. None
Not involved
None
None
None
If the value of Max preamble retransmission is too small, the preamble power may fail to ramp to the required value. This may result in UE access failure. If it is too large, the UE will repeatedly increase the power and make The parameter modification has no access attempts, which may result in impact on the equipment. interference to other UEs.
None
None
None
None
None
None
None
None
The routing priority is modified. In the case of multiple routes to the same signaling point, the route priority is affected.
None
Not involved
None
Not involved
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
All the switches have multiple choices. SELECT ALL means turning on all the switches; CLEAR ALL means turning off all the switches; GRAYED ALL means keeping the original states of all the switches. If the SYS_INFO_U PDATE_FOR _IU_RST switch is turned off, the BARRED_CE LL_FOR_CS DOMAIN_RS T switch is invalid.The parameter modification has no impact on the equipment. When the Not involved
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
1. This command is applicable to the boards AOUa and POUa. 2. It is used for interworking with products of other manufacturer The parameter modification has no s. impact on the equipment. None
None
Not involved
None
The modification of the parameter affects the adjacent node that is configured with the factor table. After the successful modification, the parameter takes effect in the following two cases: 1. New access subscriber. 2. Bandwidth modification of the existing The parameter modification has no subscriber impact on the equipment. None
The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None
The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None
The modification of the parameter affects the adjacent node that is configured with the factor table. After the successful modification, the parameter takes effect in the following two cases: 1. New access subscriber. 2. Bandwidth modification of the existing The parameter modification has no subscriber impact on the equipment. None If the value is excessively low, UEs at the edge of cells fail in network searching, resulting in influence on coverage of the downlink common channel. This finally affects the cell coverage. If the value is excessively high, the power resources are wasted, and other channels are interfered The parameter modification has no seriously, thus the cell capacity is impact on the equipment. influenced.
None
The modification of the parameter affects the adjacent node that is configured with the factor table. After the successful modification, the parameter takes effect in the following two cases: 1. New access subscriber. 2. Bandwidth modification of the existing The parameter modification has no subscriber impact on the equipment. None The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None The modification of the parameter affects the adjacent node that is configured with the factor table. After the successful modification, the parameter takes effect in the following two cases: 1. New access subscriber. 2. Bandwidth modification of the existing The parameter modification has no subscriber impact on the equipment. None
None
The cell should be deactivated in The cell should be activated after advance. the parameter modification.
None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
The settings of PsInfoUpdFla g is valid only when the value of "PsNriCfgMo de" in "SET UOPERATO RCFGPARA" is set to SUPP_IUFLE X or SUPP_IUFLE X_MOCN.Th e parameter modification has no impact on the equipment. Not involved The settings of PsInfoUpdTm r is valid only when the value of "PsInfoUpdFl ag" in "SET UOPERATO RCFGPARA" is set to ON.The parameter modification has no impact on the equipment. Not involved
None
None
The modification of the parameter affects the adjacent node that is configured with the factor table. After the successful modification, the parameter takes effect in the following two cases: 1. New access subscriber. 2. Bandwidth modification of the existing The parameter modification has no subscriber impact on the equipment. None The modification of the parameter affects the adjacent node that is configured with the factor table. After the successful modification, the parameter takes effect in the following two cases: 1. New access subscriber. 2. Bandwidth modification of the existing The parameter modification has no subscriber impact on the equipment. None
The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None
When "CNProtclVer" in "ADD UCNNODE" is set to R5 or any later version, PsNriCfgMod e may be set to SUPP_IUFLE X.The parameter modification has no impact on the equipment. When "CNProtclVer" in "ADD UCNNODE" is set to R6 or any later version, PsNriCfgMod e may be set to SUPP_MOC N or SUPP_IUFLE X_MOCN.Th e parameter modification has no impact on the Not involved
None
The settings of PSNRILength is valid only when the value of "PsNriCfgMo de" in "SET UOPERATO RCFGPARA" is set to SUPP_IUFLE X, SUPP_MOC N or SUPP_IUFLE X_MOCN.Th e parameter modification has no impact on the equipment. Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
None
None
The modification of the parameter affects the adjacent node that is configured with the factor table. After the successful modification, the parameter takes effect in the following two cases: 1. New access subscriber. 2. Bandwidth modification of the existing The parameter modification has no subscriber impact on the equipment. None The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None The modification of the parameter affects the adjacent node that is configured with the factor table. After the successful modification, the parameter takes effect in the following two cases: 1. New access subscriber. 2. Bandwidth modification of the existing The parameter modification has no subscriber impact on the equipment. None
None
Not involved
None
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
The line code must be consistent with that on the interconnecte d side. HDB3 (HDB3 code) and AMI (AMI code) are used for E1 ports. B8ZS (B8ZS code) and AMI_ZCS (AMI code) are used for The parameter modification has no T1 ports. impact on the equipment. None
The first byte of the IP address of the FE port in the NodeB cannot use 0 or 127. The IP address cannot be a broadcast address or a multicast address. The IP address of the FE port in the NodeB and the intranet IP address of OMU cannot be in the network segment or related. The IP address of the FE port in the NodeB cannot be the same as the configured IP address in The parameter modification has no the BSC6900. impact on the equipment. None
The first byte of the IP address of the FE port in the NodeB cannot use 0 or 127. The IP address cannot be a broadcast address or a multicast address. The IP address of the FE port in the NodeB and the intranet IP address of OMU cannot be in the network segment or related. The IP address of the FE port in the NodeB cannot be the same as the configured IP address in The parameter modification has no the BSC6900. impact on the equipment. None
None
If this parameter is set to ON, a PTM nonstreaming bearer might be pre-empted by an MBMS bearer of a higher priority or a non-MBMS bearer in the case of congestion. Thus, the MBMS service is disrupted, which has a relatively great The parameter modification has no impact because the PTM bearer serves impact on the equipment. more than one user.
None
If this parameter is set to ON, pre-emption is triggered when PTM streaming bearer admission fails. That is, a lower-priority MBMS bearer or a non-MBMS bearer is The parameter modification has no released. Thus, the ongoing service is impact on the equipment. disrupted and call drop even occurs.
None
If this parameter is set to ON, a PTM streaming bearer might be pre-empted by an MBMS bearer of a higher priority or a non-MBMS bearer in the case of congestion. Thus, the MBMS service is disrupted, which has a relatively great The parameter modification has no impact because the PTM bearer serves impact on the equipment. more than one user.
The frame structure must be consistent with that on the interconnecte The parameter modification has no d side. impact on the equipment. None
The frame structure must be consistent with that on the interconnecte The parameter modification has no d side. impact on the equipment. None
The frame structure must be consistent with that on the interconnecte The parameter modification has no d side. impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
None
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
None
None
None
None
None
None
The transmission priority of the service is affected if the queue DSCP value of the port is The parameter modification has no modified. impact on the equipment. None
The transmission priority of the service is affected if the queue DSCP value of the port is The parameter modification has no modified. impact on the equipment. None
The transmission priority of the service is affected if the queue DSCP value of the port is The parameter modification has no modified. impact on the equipment. None
The transmission priority of the service is affected if the queue DSCP value of the port is The parameter modification has no modified. impact on the equipment. None
The transmission priority of the service is affected if the queue DSCP value of the port is The parameter modification has no modified. impact on the equipment. None
When the parameter is set to CS1, it indicates that the local RNC is interconnecte d to the adjacent node by using the CS1 protocol version. When the parameter is set to CS2, it indicates that the local RNC is interconnecte d to the adjacent node by using the CS2 protocol version. The CS2 protocol version is backward compatible with the CS1. By default, the parameter is set to CS2. The parameter modification has no When the impact on the equipment. None
None
None
None
None
None
None
None
The larger the value of the parameter, the lower the probability of selecting neighboring The parameter modification has no cells. The smaller the value the parameter, impact on the equipment. the higher the probability of doing so.
None
The larger the value of the parameter is, the more difficult it is for the UE to camp on the cell. The smaller the value of the parameter is, the easier it is for the UE to camp on the cell. But if the value is excessively small, it is possible that the UE cannot receive the system messages carried by PCCPCH. When this parameter is not set to any value, the UE adopts the corresponding value of the current serving cell, added through the ADD UCELLSELRESEL command. The parameter modification has no Generally, this parameter is not set to any impact on the equipment. value.
None
None
None
The larger the value of the parameter is, the more difficult it is for the UE to camp on the cell. The smaller the value of the parameter is, the easier it is for the UE to camp on the cell. But if the value is excessively small, it is possible that the UE cannot receive the system messages carried by PCCPCH. When this parameter is not set to any value, the UE adopts the corresponding value of the current serving cell, added through the ADD UCELLSELRESEL command. The parameter modification has no Generally, this parameter is not set to any impact on the equipment. value.
None
None
None
None
None
None
None
None
None
None
None
None
Not involved
None
None
None
The value of RafcTmr can be negotiated with the value of "RatcTmr" in "SET UIUTIMERAN DNUM"; thus, the RNC can successfully initiate the reset before the CN reset response timer expires.The parameter modification has no impact on the equipment. Not involved If the RAN Sharing Support and MOCN Support are both switched off,Redundan t operators should be removed by "RMV UCNOPERA TOR" and only one operator can exist. Not involved
None
None
None
The value of RatcTmr can be negotiated with the value of "RafcTmr" in "SET UIUTIMERAN DNUM"; thus, the CN can successfully initiate the reset before the RNC reset response timer expires.The parameter modification has no impact on the equipment. Not involved
None
Not involved
None
Not involved
None
None
None
None
None
The retransmit mechanism is used if the signaling is sent by adopting RLC UM on Uu interface during channel handover.In this case, the setting of the correspondin g waiting response timer for UE reconfiguratio n does not work. (For example, when the channel change form DCH to FACH or the channel change from FACH to DCH, the timer does not work.) The retransmit Not involved
None
The retransmit mechanism is used if the signaling is sent by adopting RLC UM on Uu interface during channel handover.In this case, the setting of the correspondin g waiting response timer for UE release does not work. (For example, when the channel change form DCH to FACH or the channel change from FACH to DCH, the timer does not work.) The retransmit timer is 2 Not involved
None
The retransmit mechanism is used if the signaling is sent by adopting RLC UM on Uu interface during channel handover.In this case, the setting of the correspondin g waiting response timer for UE setup does not work. (For example, when the channel change form DCH to FACH or the channel change from FACH to DCH, the timer does not work.) The retransmit timer is 2 Not involved
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
None
None
None
The modification of the timer involves the peer end. For details, see ITU-T Q2630.1 or ITU-T The parameter modification has no Q2630.2. impact on the equipment. None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
The modification of the timer involves the peer end. For details, see ITU-T Q2630.1 or ITU-T The parameter modification has no Q2630.2. impact on the equipment. None
None
None
None
None
None
Not involved
None
None
Not involved
None
None
None
None
None
None
None
None
None
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
The modification of the timer involves the peer end. For details, see ITU-T Q2630.1 or ITU-T The parameter modification has no Q2630.2. impact on the equipment. None
None
Negotiation can succeed only when the configuration is consistent on the local and peer The parameter modification has no ends. impact on the equipment. None Negotiation can succeed only when the configuration is consistent on the local and peer The parameter modification has no ends. impact on the equipment. None
None
None
None
None
None
None
None
Not involved
None
None
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
None
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
The resource group must The parameter modification has no exist. impact on the equipment. None
Not involved
None
Not involved
None
Not involved
None
None
None
The modification of the parameter affects the detection sensitivity of The parameter modification has no the SAAL link. impact on the equipment. None
None
None
The switch is off in the case of a signaling point to the single link. After the link to a signaling point is disconnected, the restart procedure is performed. See the ITU- The parameter modification has no T Q704. impact on the equipment. None
None
Not involved
None
None
None
Not involved
None
None
None
None
Change this parameter will impact the function interrelated with The parameter modification has no Parameter 1. impact on the equipment. None
None
Change this parameter will impact the function interrelated with Parameter The parameter modification has no 10. impact on the equipment. None
None
None
None
None
None
None
None
None
Not involved
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
Change this parameter will impact the function interrelated with The parameter modification has no Parameter 2. impact on the equipment. None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
None
Change this parameter will impact the function interrelated with The parameter modification has no Parameter 3. impact on the equipment. None
None
Change this parameter will impact the function interrelated with The parameter modification has no Parameter 4. impact on the equipment. None
None
Change this parameter will impact the function interrelated with The parameter modification has no Parameter 5. impact on the equipment. None
None
Change this parameter will impact the function interrelated with The parameter modification has no Parameter 6. impact on the equipment. None
None
Change this parameter will impact the function interrelated with The parameter modification has no Parameter 7. impact on the equipment. None
None
Change this parameter will impact the function interrelated with The parameter modification has no Parameter 8. impact on the equipment. None
None
Change this parameter will impact the function interrelated with The parameter modification has no Parameter 9. impact on the equipment. None
The setting of this parameter must be negotiated with that on the interconnecte The parameter modification has no d side. impact on the equipment. None
The routing context must be unique and needs to be negotiated The parameter modification has no with the peer. impact on the equipment. None
None
Not involved
None
None
Not involved
If the value of this parameter is too low, whether the UE is in the stable low activity state cannot be determined. If the value of this parameter is too high, the dedicated channel resources are wasted. This parameter should be set on the basis of the real-time service model.
None
Not involved
If the value of this parameter is too low, whether the UE is in the stable low activity state cannot be determined. If the value of this parameter is too high, the dedicated channel resources are wasted. This parameter should be set on the basis of the real-time service model.
None
Not involved
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
Not involved
If the value of this parameter is too low, whether the UE is in the stable low activity state cannot be determined. If the value of this parameter is too high, the dedicated channel resources are wasted. This parameter should be set on the basis of the real-time service model.
None
Not involved
If the value of this parameter is too low, whether the UE is in the stable low activity state cannot be determined. If the value of this parameter is too high, the dedicated channel resources are wasted. This parameter should be set on the basis of the real-time service model.
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
If the value of this parameter is too high, congestion may occur over the common channel.
None
Not involved
If the value of this parameter is too high, the period of reporting 4A event is delayed and congestion may occur over the common channel.
None
Not involved
If the value of this parameter is too high, congestion may occur over the common channel.
None
Not involved
If the value of this parameter is too high, the period of reporting 4A event is delayed and congestion may occur over the common channel.
None
Not involved
If the value of this parameter is too high, congestion may occur over the common channel.
None
Not involved
If the value of this parameter is too high, the period of reporting 4A event is delayed and congestion may occur over the common channel.
None
Not involved
If the value of this parameter is too high, congestion may occur over the common channel.
None
Not involved
If the value of this parameter is too high, the period of reporting 4A event is delayed and congestion may occur over the common channel.
None
None
The value should be greater than "RTOMIN" and smaller than "RTOMAX" in the command "ADD The parameter modification has no SCTPLNK". impact on the equipment. None
The value should be greater than "RTOMIN" in the command "ADD The parameter modification has no SCTPLNK". impact on the equipment. None
The value should be smaller than "RTOMAX" in the command "ADD The parameter modification has no SCTPLNK". impact on the equipment. None
None
None
None
None
Not involved
None
The correspondin g traffic index must be The parameter modification has no configured. impact on the equipment. None
None
Not involved
None
None
None
None
Not involved
None
Not involved
None
None
None
None
Not involved
None
None
Not involved
None
Not involved
None
The setting of DIP switches must be consistent with that on the interconnecte The parameter modification has no d side. impact on the equipment. None The setting of this parameter must be consistent with that on The parameter modification has no the peer. impact on the equipment. None
None
Not involved
None
None
None
None
None The setting of this parameter must be negotiated with that on the interconnecte d side. 1. If you set the start date or end date of DST to a day of the week after a specific date, the specific date must be six days or more days prior to the last day of the month. For example, the last day of October is the 31st day. Then, the specific date cannot be later than the 25th (31 6) day. If you set the specific date to Tuesday after 26 October, this date is not included in the November of 2005. Therefore, the specific
The setting of this parameter must be negotiated with that on the interconnecte The parameter modification has no d side. impact on the equipment. None The parameter cannot be modified.
Not involved
None
None
Not involved
None
Not involved
None
None
None
None
None
Not involved
None
None
None
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
None
None
UE will start inter-system measurements The parameter modification has no easily when this parameter is large. So that impact on the equipment. better cells can be selected.
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
None
None
Not involved
None
None
None
Not involved
None
None
None
None
None
Not involved
None
Not involved
None
The parameter cannot be modified. This parameter cannot be modified. The parameter cannot be modified.
Not involved
None
Not involved
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
The source IP address can be: local IP address of the PPP link (PEUa/POUa/ POS), local IP address of the MP group ((PEUa/POU a), IP address of the Ethernet port of the local port (FG2a/GOUa ), and IP address of the local The parameter modification has no board. impact on the equipment. None The parameter cannot be modified.
Not involved
None
The modification of the parameter affects the adjacent node that is configured with the factor table. After the successful modification, the parameter takes effect in the following two cases: 1. New access subscriber. 2. Bandwidth modification of the existing The parameter modification has no subscriber impact on the equipment. None The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None The modification of the parameter affects the adjacent node that is configured with the factor table. After the successful modification, the parameter takes effect in the following two cases: 1. New access subscriber. 2. Bandwidth modification of the existing The parameter modification has no subscriber impact on the equipment. None
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
None
None
The modified parameter takes effect after the BSC6900 is The parameter modification has no reset. impact on the equipment. None
None
None None
Not involved None The parameter modification has no impact on the equipment. None
None
None
None
None
None
None
None
None
None
Not involved
None
The parameter cannot be modified. The parameter cannot be modified. The parameter cannot be modified.
Not involved
None
Not involved
None
Not involved
None
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
None
None
Not involved
None
None
None
Not involved
None
Not involved
None
None
None
None
None
Not involved
None
None
None
The port can be set to the DOWN or UP state when this parameter is modified. If the speed modes on the local and peer end are not consistent, the service can be The parameter modification has no interrupted. impact on the equipment. None
None
None
The cell should be deactivated in The cell should be activated after advance. the parameter modification.
None
None
Not involved
None
None
None
None
None
Not involved
None
None
None
The modification of the parameter affects the adjacent node that is configured with the factor table. After the successful modification, the parameter takes effect in the following two cases: 1. New access subscriber. 2. Bandwidth modification of the existing The parameter modification has no subscriber impact on the equipment. None
None
None
The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None The modification of the parameter affects the adjacent node that is configured with the factor table. After the successful modification, the parameter takes effect in the following two cases: 1. New access subscriber. 2. Bandwidth modification of the existing The parameter modification has no subscriber impact on the equipment. None
None
Clock sources and priorities are in one-to-one The parameter modification has no mapping. impact on the equipment. Not involved
Clock sources and priorities are in one-to-one The parameter modification has no mapping. impact on the equipment. None The parameter cannot be modified.
Not involved
None
Not involved
None
Clock sources and priorities are in one-to-one mapping. Each backplane board 8K clock has only one clock The parameter modification has no source. impact on the equipment. None
None
For the modification of the parameter, see the ITU-T The parameter modification has no Q.2110. impact on the equipment. None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification does not impact the equipment. None
None None
None
Not involved
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
Not involved
None
None
None
None
None
None
This parameter determines the number of UEs over the Iur interface. If the parameter is set too large, too much Iur resources will The parameter modification has no be occupied; if the parameter is set too impact on the equipment. small, ping-pong relocation may occur.
None
Not involved
None
None
If the interface board clock source of the MPS subrack is set, you can set the 8 kHz output clock source. For the MPS and TCS, you can set the backplane board 8k output clock as the clock source of the interface board. For the EPS, you cannot perform the The parameter modification has no setting. impact on the equipment. None The parameter modification has no None impact on the equipment. None If the value is excessively low, UEs at the edge of cells fail in network searching, resulting in influence on coverage of the downlink common channel. This finally affects the cell coverage. If the value is excessively high, the power resources are wasted, and other channels are interfered The parameter modification has no seriously, thus the cell capacity is impact on the equipment. influenced.
None
None
None
None
None
None
None
UE will start intra-frequency and interfrequency measurements easily when this The parameter modification has no parameter is large. So that better cells can impact on the equipment. be selected.
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
Not involved
None
None None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
None
None
None
Not involved
None
None
Not involved
None
None
None
Not involved
None
None
None
None
None
Not involved
None
None
Not involved
None
For the modification of the parameter, see the ITU-T The parameter modification has no Q.2110. impact on the equipment. None
None
Not involved
None
None
Not involved
None
None
None
None
None
Not involved
None
None
None
None
The cell should be deactivated in The cell should be activated after advance. the parameter modification.
None
None
The adjacent node ID must be The parameter modification has no configured. impact on the equipment. None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Not involved
None
None
None
None
None
Not involved
None
None
When "CNProtclVer" in "ADD UCNNODE" is set to R99, SupportCRTy pe is CR527_SUP PORT or CR527_NOT _SUPPORT; when "CNProtclVer" in "ADD UCNNODE" is set to R4, SupportCRTy pe is CR528_SUP PORT or CR528_NOT _SUPPORT; when "CNProtclVer" in "ADD UCNNODE" is set to R5, SupportCRTy pe is CR529_SUP PORT or CR529_NOT _SUPPORT; when "CNProtclVer" Not involved
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
Not involved
None
None
Not involved
None
None
None
Change this parameter will impact the patch function controlled by The parameter modification has no switch 1. impact on the equipment. None
Change this parameter will impact the patch function controlled by The parameter modification has no switch 10. impact on the equipment. None Change this parameter will impact the patch function controlled by The parameter modification has no switch 2. impact on the equipment. None Change this parameter will impact the patch function controlled by The parameter modification has no switch 3. impact on the equipment. None Change this parameter will impact the patch function controlled by The parameter modification has no switch 4. impact on the equipment. None Change this parameter will impact the patch function controlled by The parameter modification has no switch 5. impact on the equipment. None Change this parameter will impact the patch function controlled by The parameter modification has no switch 6. impact on the equipment. None Change this parameter will impact the patch function controlled by The parameter modification has no switch 7. impact on the equipment. None Change this parameter will impact the patch function controlled by The parameter modification has no switch 8. impact on the equipment. None
Change this parameter will impact the patch function controlled by The parameter modification has no switch 9. impact on the equipment. None
None
None
None
None
None
None
None
Not involved
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
Not involved
None
T302 broadcast in the SIB1 = Roundup {[timer 302 [ms]] + 2 x [Iub transmission delay]}. [timer 302 [ms]] is configured through the "SET UCONNMOD ETIMER" command. [Iub transmission delay] is the Iub transmission delay configured through the "ADD UNodeB" command. Roundup means rounding up and mapping to a value of the set {100, 200, 400, 600, 800, Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
The time value of T314 and T315 should be both equal to 0 or both greater than T302*N302.T he parameter modification has no impact on the equipment. Not involved
None
The time value of T314 and T315 should be both equal to 0 or both greater than T302*N302.T he parameter modification has no impact on the equipment. Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
None
None
None
Not involved
None
None
Not involved
None
None
None
None
None
None
None
None
None
None
None
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
None
None
None
None
None
The cell should be deactivated in The cell should be activated after advance. the parameter modification.
None
None
None
None
None
None
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
None
None
None
None
None
None
None
None
Not involved
None
None
Not involved
None
Not involved
None
Not involved
None
None
None The IP address of the TGW cannot use the configured IP address of another TGW . The IP address of TGW cannot be the same as the IP address configured in the BSC6900. Otherwise, operation and maintenance channel for The parameter modification has no TGW fails. impact on the equipment. None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
The IP address of the TGW cannot use the configured IP address of another TGW. The IP address of TGW cannot be the same as the IP address configured in the BSC6900. Otherwise, operation and maintenance channel for The parameter modification has no TGW fails. impact on the equipment. None
The parameter modification has no None impact on the equipment. None The IP address of the TGW cannot use the configured IP address of another TGW . The IP address of TGW cannot be the same as the IP address configured in the BSC6900. Otherwise, operation and maintenance channel for The parameter modification has no TGW fails. impact on the equipment. None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
Not involved
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Not involved
None
The parameter cannot be modified. The parameter cannot be modified. The parameter cannot be modified.
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
Not involved
None
1. If you set "Upper time threshold of raised fault" and "Lower time threshold of raised fault" to "0", the accumulated alarm blink duration is counted but not reported. 2. If "Upper time threshold of raised fault" is not "0", the value of "Lower time threshold of raised fault" cannot be "0" and you must ensure that "Upper time threshold of raised fault" is greater than "Lower time threshold of raised fault". 3. When The parameter modification has no "Upper time impact on the equipment. None
1. If you set "Upper time threshold of raised fault" and "Lower time threshold of raised fault" to "0", the accumulated alarm blink duration is counted but not reported. 2. If "Upper time threshold of raised fault" is not "0", the value of "Lower time threshold of raised fault" cannot be "0" and you must ensure that "Lower time threshold of raised fault" is smaller than or equal to "Upper time threshold of raised fault". The parameter modification has no 3. When impact on the equipment. None
None
None
None
Set TnlBearerTyp e according to the actual used transport type.The parameter modification has no impact on the equipment. Not involved Set TnlBearerTyp e according to the actual used transport type.The parameter modification has no impact on the equipment. Not involved
None
None
Before modifying this parameter, deactivate all the cells under this The cell should be activated after NodeB. the parameter modification.
None
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
Not involved
None
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
This parameter cannot be modified. This parameter cannot be modified. This parameter cannot be modified.
Not involved
None
Not involved
None
Not involved
None
None
None
None
None
None
None
Not involved
None
None
Not involved
The greater the value of this parameter is, the less probable the incorrect decision is. Yet the response of the event to the change of measured signals becomes slower accordingly.
None
None
Not involved
The greater the value of this parameter is, the less probable the incorrect decision is. Yet the response of the event to the change of measured signals becomes slower accordingly.
None
None
None
None
None
None
None
None
None
None
None
Not involved
None
Not involved
None
Not involved
None
None
If the value is excessively low, there are few chances for the radio link to get synchronized. If the value is excessively high, the radio link failure process is The parameter modification has no probably delayed, and the downlink impact on the equipment. interference increases.
The TRM load threshold must be configured The parameter modification has no already. impact on the equipment. None
The TRM load threshold must be configured The parameter modification has no already. impact on the equipment. None
The TRM load threshold must be configured The parameter modification has no already. impact on the equipment. None The parameter cannot be modified.
Not involved
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Not involved
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
This parameter is valid only in the E1 mode The parameter modification has no of the AEUa. impact on the equipment. None
None
Not involved
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
None
Not involved
None
None
The cell should be deactivated in The cell should be activated after advance. the parameter modification. The parameter cannot be modified. The parameter cannot be modified.
None
Not involved
None
Not involved
None
The correspondin g traffic index must be The parameter modification has no configured. impact on the equipment. None
None
Not involved
None
None
None
None
The cell should be deactivated in The cell should be activated after advance. the parameter modification.
None
None
The cell should be deactivated in The cell should be activated after advance. the parameter modification.
None
None
The cell should be deactivated in The cell should be activated after advance. the parameter modification.
None
The modification of the timer involves the peer end. For details, see ITU-T Q2630.1 or ITU-T The parameter modification has no Q2630.2. impact on the equipment. None
The adjacent node ID must be The parameter modification has no configured. impact on the equipment. None
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
Not involved
None
None
None
None
Not involved
The longer the trigger time is, the greater the effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower.
None
Not involved
The longer the trigger time is, the greater the effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower.
None
Not involved
The longer the trigger time is, the greater the effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower.
None
Not involved
The longer the trigger time is, the greater the effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower.
None
Not involved
The longer the trigger time is, the greater the effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower.
None
None
None
None
None
None
None
Not involved
The longer the trigger time is, the greater the effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower.
None
Not involved
The longer the trigger time is, the greater the effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower.
None
Not involved
The longer the trigger time is, the greater the effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower.
None
Not involved
The longer the trigger time is, the greater the effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower.
None
Not involved
The longer the trigger time is, the greater the effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower.
None
None
If the value is too high, power resources are wasted, which impacts system capacity. If the value is too low, resources can be fully The parameter modification has no used and coverage may be impacted in impact on the equipment. case of insufficient resources.
None
If the value is too high the system load after admission may be over large, which impacts system stability and leads to system congestion. If the value is too low, the The parameter modification has no possibility of user rejects may increase, impact on the equipment. resulting in waste in idle resources.
None
None
None
None
None
None
Not involved
None
None
None
Not involved
None
None
The parameter modification has no impact on the equipment. None The backer position the value is in {SF4,SF8,SF16,SF32,SF64,SF128,SF256,S FOFF}, the less code and credit resources reserved for handover UEs. The possibility of rejecting handover UE admissions increases and performance of UEs cannot be guaranteed. The more frontal position the value is, the more the possibility of The parameter modification has no rejecting new UEs is and some idle impact on the equipment. resources are wasted.
None
If the value is too high, the possibility of wrong rejection to uplink admissions increases, leading to waste in uplink resources. If the value is too low, the uplink resources is insufficient. However, because the possibility of putburst load by ACK/NACK and its impact are relatively low, the value can be set to a low level, representing the loose admission The parameter modification has no rule. impact on the equipment. None
None
None
The parameter modification has no impact on the equipment. None The higher the parameter is, the higher the service rate of the user in handover is, and the more obviously the cell load is decreased. However, high value of the parameter gives rise to the fluctuation and congestion of the target cell load. The lower the parameter is, the smaller amplitude of the load decreases as a result of the interfrequency load handover, and the easier it is The parameter modification has no to maintain the stability of the target cell impact on the equipment. load.
None
None
None
None
None
None
None
The lower the parameter value is, the easier the credit enters the congestion status, the easier the LDR action is triggered, and the easier the user experience is affected. A lower code resource LDR trigger threshold, however, causes a higher admission success rate because the resource is The parameter modification has no reserved. The parameter should be set impact on the equipment. based on the operator's requirement.
None
None
None
None
None
None
None
None
None
None
None
The lower the LDR trigger and release thresholds are, the easier the system enters the preliminary congestion status, the harder it is released from this status, the easier the LDR action is triggered, and the more likely the users are affected. But, the admission success rate becomes higher since the resources are preserved. The The parameter modification has no carrier shall make a trade-off between these impact on the equipment. factors.
None
None
None
None
None
None
None
None
The lower the LDR trigger and release thresholds are, the easier the system enters the preliminary congestion status, the harder it is released from this status, the easier the LDR action is triggered, and the more likely the users are affected. But, the admission success rate becomes higher since the resources are preserved. The The parameter modification has no carrier shall make a trade-off between these impact on the equipment. factors.
None
None
Not involved
The greater the filtering coefficient is, the greater the smoothing effect is and the less the random interference is. Yet the response to changes of the measured value becomes slower.
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
None
If the value is too high the system load after admission may be over large, which impacts system stability and leads to system congestion. If the value is too low, the The parameter modification has no possibility of user rejects may increase, impact on the equipment. resulting in waste in idle resources.
None
If the value is too high the system load after admission may be over large, which impacts system stability and leads to system congestion. If the value is too low, the The parameter modification has no possibility of user rejects may increase, impact on the equipment. resulting in waste in idle resources.
None
If the value is too high the system load after admission may be over large, which impacts system stability and leads to system congestion. If the value is too low, the The parameter modification has no possibility of user rejects may increase, impact on the equipment. resulting in waste in idle resources.
None
If the value is too high the system load after admission may be over large, which impacts system stability and leads to system congestion. If the value is too low, the The parameter modification has no possibility of user rejects may increase, impact on the equipment. resulting in waste in idle resources.
None
None
None
None
None
The lower the OLC trigger threshold is, the easier the system is in the overload status. An excessively low value of the OLC trigger threshold is very detrimental to the system performance. The lower the OLC release The parameter modification has no threshold is, the harder the system releases impact on the equipment. the overload.
None
None
None
The lower the OLC trigger threshold is, the easier the system is in the overload status. An excessively low value of the OLC trigger threshold is very detrimental to the system performance. The lower the OLC release The parameter modification has no threshold is, the harder the system releases impact on the equipment. the overload.
None
None
None
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
None
None
None
None
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
If the value is too high, the system load after admission may be over large, which impacts system stability and leads to system congestion. If the value is too low, the The parameter modification has no possibility of user rejects may increase, impact on the equipment. resulting in waste in idle resources.
None
None
Not involved
The longer the trigger time is, the greater the effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower.
None
Not involved
The longer the trigger time is, the greater the effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower.
None
Not involved
The longer the trigger time is, the greater the effect of ignoring sudden changes is. Yet the response to changes of the measured value becomes slower.
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
None
Not involved
None
The parameter cannot be modified. The parameter cannot be modified. The parameter cannot be modified.
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
Not involved
None
None
None
None
None
None
None
None
None
None
None
None
None
None
None
The NodeB must be configured with the electronic serial number during The parameter modification has no modification. impact on the equipment. None
None
None
None
None
Not involved
None
None
Not involved
None
None
None
None
None
None
Not involved
None
The configuration data must be the same as that of the The parameter modification has no peer system. impact on the equipment. None
Not involved
None
None
None
Incorrect setting of this parameter can lead to access failure to the target The parameter modification has no IP address. impact on the equipment. None The parameter cannot be modified.
Not involved
None
Incorrect setting of this parameter can lead to access failure to the target The parameter modification has no IP address. impact on the equipment. None Incorrect setting of this parameter can lead to access failure to the target The parameter modification has no IP address. impact on the equipment. None The existing networking can be affected when the relation between the VLAN and the DSCP are The parameter modification has no reset. impact on the equipment. None The modification of the parameter affects the adjacent node that is configured with the factor table. After the successful modification, the parameter takes effect in the following two cases: 1. New access subscriber. 2. Bandwidth modification of the existing The parameter modification has no subscriber impact on the equipment. None
The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None
The modification of the parameter affects the adjacent node configured with the TRMMAP. After the successful modification, it is valid in the case of the new access of a subscriber and the bandwidth modification of an existing The parameter modification has no subscriber. impact on the equipment. None
If the parameter is modified, the admission rule of subsequent new access services are affected (Path type selection The parameter modification has no sequence). impact on the equipment. None
The modification of the parameter affects the adjacent node that is configured with the factor table. After the successful modification, the parameter takes effect in the following two cases: 1. New access subscriber. 2. Bandwidth modification of the existing The parameter modification has no subscriber impact on the equipment. None
None
None
The parameter modification has no impact on the equipment. None The parameter modification has no impact on the equipment. None
None
None
None
None
None
Not involved
None
The configuration data must be the same as that of the The parameter modification has no peer system. impact on the equipment. None
None
The cell should be deactivated in The cell should be activated after advance. the parameter modification.
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None
Not involved
None
None None
Not involved The parameter modification has no impact on the equipment. None
The longer the UL AMRC timer is, the less frequently the AMRC mode is adjusted. In addition, the response to measurement reports becomes slower accordingly.
None
None
None
None
Not involved
None
For the modification of the parameter, see the ITU-T The parameter modification has no Q.2110. impact on the equipment. None
None
Not involved
None
None
The conversion from E1 to T1 or from T1 to E1 takes effect after the board is The parameter modification has no reset. impact on the equipment. None
Not involved
None
None
None
None
None
Not involved
None
None
Introduced in Version
Attribute
Radio
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Equipment
Equipment
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Equipment
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Equipment
Radio
Radio
Radio
Radio
Equipment
Equipment
Radio
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Equipment
Equipment
Equipment
Equipment
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Equipment
Radio
Transport
Radio
Equipment
Equipment
Equipment
Equipment
Equipment
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Transport
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport Transport
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
BSC6900 V900R011
Transport
BSC6900 V900R011
Radio
Transport
Radio
Equipment
Equipment
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Transport
Transport
Equipment
Equipment
Equipment
Equipment
Radio
Equipment
BSC6900 V900R011
Transport
Equipment
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport Equipment
Equipment
BSC6900 V900R011
Transport
Radio
Radio
Radio
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Equipment
Equipment
Transport
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
BSC6900 V900R011
Equipment
BSC6900 V900R011
Equipment
BSC6900 V900R011
Equipment
BSC6900 V900R011
Equipment
Transport
BSC6900 V900R011
Transport
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Transport
Equipment
Radio
Equipment
Equipment
Equipment
Equipment
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Transport
Transport
Transport
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Radio
Radio
Radio
Radio
Equipment
Transport
Transport
Transport
Transport
Transport
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Equipment
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Transport
Equipment
Equipment
Radio
Equipment
Equipment
Equipment
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Equipment
Radio
Equipment
Radio
Radio
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Radio
Equipment
Equipment
Radio
Radio
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Radio
Radio
Radio
Equipment
Equipment
Radio
BSC6900 V900R011
Radio
Radio
Radio
Radio
Equipment
Radio
Radio
Radio
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Radio
Radio
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Equipment
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Equipment
Equipment
Equipment
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Equipment
Equipment
Radio
Radio
Radio
Equipment
Equipment
Equipment
Equipment
Radio
Radio
Radio
Transport
Radio
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Transport
Transport
Transport
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Radio
Radio
Radio
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Transport
BSC6900 V900R011
Transport
Equipment
Equipment
Radio
Radio
Radio
Radio
Radio
Equipment
Equipment
Equipment
Radio
Equipment
Radio
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Equipment
Equipment
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment Radio
Radio
Radio
BSC6900 V900R011
Radio
BSC6900 V900R011
Radio
Radio
Equipment
Radio
BSC6900 V900R011
Radio
Radio
Equipment
Radio
Radio
Radio
Radio
Radio
Radio
Equipment
Equipment
Equipment
BSC6900 V900R011
Equipment
BSC6900 V900R011
Equipment
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
BSC6900 V900R011
Radio
Radio
Equipment
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Radio
Radio
Radio
Equipment
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Transport
Radio
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Transport
Equipment
Equipment
Radio
Radio
Equipment
Equipment
Equipment
Radio
Radio
Equipment
Equipment
Radio
Transport
Equipment
Equipment
Equipment
Equipment
Transport
Transport
Transport
Transport
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Radio
Radio
Equipment
Equipment
Equipment
Equipment
Radio
Radio
Radio
Transport
Transport
Transport
Transport
Transport
Transport
Radio
Radio
Radio
Radio
Radio
Radio
BSC6900 V900R011
Equipment
Radio
Radio
Radio
Equipment
Equipment
Equipment
Equipment
Transport
Equipment
Transport
Radio
Radio
Radio
Radio
Equipment
Equipment Equipment
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Equipment
Equipment
Transport
Transport
Transport
Transport
Transport
BSC6900 V900R011
Equipment
Equipment
Equipment
BSC6900 V900R011
Transport
BSC6900 V900R011
Equipment
Equipment
Equipment
Equipment
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio Equipment
Transport
Radio
Radio
Radio
Transport
BSC6900 V900R011
Radio
Radio
Radio
Radio
Radio
Transport
Transport
Transport
Equipment
Transport
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Transport
Transport
Transport
Transport
Transport
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Transport
Transport
Radio
Transport
Transport
Transport
Equipment
Transport
Equipment
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Transport
Transport
Radio
Radio
Radio
Radio
Radio
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Equipment
Equipment
Equipment
Equipment
Equipment
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Transport
Radio
BSC6900 V900R011
Radio
Radio
BSC6900 V900R011
Radio
Equipment
Radio
Transport
Radio
BSC6900 V900R011
Transport
Equipment
Equipment
Equipment
Equipment
Radio
Equipment
Radio
Radio
Radio
Equipment
Equipment
Transport
Transport
Equipment
Radio
BSC6900 V900R011
Transport
BSC6900 V900R011
Transport
Equipment
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Radio
Radio
Radio
Radio
Radio
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Transport
Radio
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
BSC6900 V900R011
Equipment
Equipment
BSC6900 V900R011
Radio
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Transport
Transport
Transport
Equipment
Radio
BSC6900 V900R011
Radio
Radio
BSC6900 V900R011
Radio
Radio
Radio
Radio
Radio
Equipment
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Equipment
Equipment
Equipment
Equipment
Radio
Radio
Equipment
Radio
Radio
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport Transport
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport Transport
Transport
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Transport
Equipment
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment Equipment
Equipment
Equipment
Radio
Transport
Transport
Transport
Transport
Equipment
Equipment
Transport
Equipment
Transport
Transport
BSC6900 V900R011
Equipment
BSC6900 V900R011
Equipment
BSC6900 V900R011
Equipment
Equipment Equipment
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Radio
Radio
Equipment
Equipment
Transport
Transport
Transport
Radio
Radio
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Equipment
Transport
Transport
Radio
Radio
Transport
Equipment
Equipment
Equipment
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Equipment
Radio
Radio
Radio
Radio
Transport
Transport
Radio
Radio
Radio
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Radio
Radio
Transport
BSC6900 V900R011
Equipment
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
BSC6900 V900R011
Radio
BSC6900 V900R011
Radio
Radio
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Equipment
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Equipment
Radio
Radio
Radio
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport Equipment
Equipment
Equipment
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Transport
Transport
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Equipment
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Transport
Radio
Equipment
Transport
Transport
Transport
Transport
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Equipment
Equipment
Radio
Radio
Radio
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio Equipment
Transport
Radio
Radio
Radio
BSC6900 V900R011
Radio
Radio
Radio
Radio
Radio
Radio
BSC6900 V900R011
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
BSC6900 V900R011
Radio
Radio
BSC6900 V900R011
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
BSC6900 V900R011
Radio
Radio
BSC6900 V900R011
Radio
Radio
Radio
BSC6900 V900R011
Radio
Radio
Radio
Radio
Radio
BSC6900 V900R011
Radio
Radio
Radio
Radio
BSC6900 V900R011
Radio
Radio
Radio
Radio
Radio
Radio
Radio
BSC6900 V900R011
Radio
Radio
Radio
Radio
Radio
BSC6900 V900R011
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
BSC6900 V900R011
Radio
Radio
BSC6900 V900R011
Radio
Equipment
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Radio
Radio
Equipment
Equipment
Equipment
Equipment
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Equipment
Equipment
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Transport
Radio
Radio
Transport
Transport
Equipment
Transport
Radio
Radio
Radio
Radio
Equipment
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Radio
Radio
Equipment
Equipment
Equipment
Equipment
Equipment
Radio
Equipment
Equipment
Equipment
Equipment
BSC6900 V900R011
Equipment
Radio
Radio
Equipment
Equipment
Equipment
Equipment
Equipment
Radio
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
BSC6900 V900R011
Equipment
Transport
BSC6900 V900R011
Transport
Transport
Radio
Radio
Radio
Transport
Equipment
Equipment
Transport
Transport
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
BSC6900 V900R011
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Transport
Transport
Transport
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Equipment
Equipment Equipment
Transport
Transport
Equipment
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
BSC6900 V900R011
Equipment
BSC6900 V900R011
Equipment
Transport
Radio
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Equipment
Equipment
Equipment
Transport
Transport
Transport
Transport
Transport
BSC6900 V900R011
Radio
Transport
Transport
Transport
Radio
BSC6900 V900R011
Equipment
Transport
Transport
Equipment
Transport
Equipment
Equipment
Equipment
Transport
Transport
Equipment
Equipment
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Equipment
BSC6900 V900R011
Equipment
Equipment
Equipment
BSC6900 V900R011
Transport
Equipment
Equipment
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Equipment
Transport
Equipment
Equipment
Equipment
Equipment
Equipment
Transport
Equipment
Equipment
Equipment
Equipment
Equipment
Transport
Transport
Transport
Transport
Radio
Radio
Radio
Radio
Transport
Transport
Transport
Radio
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Transport
Transport
Radio
Radio
Radio
Equipment
Equipment
Transport
BSC6900 V900R011
Radio
BSC6900 V900R011
Radio
Radio
Radio
Transport
Equipment
Equipment
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Transport
Radio
Radio
Radio
Radio
Transport
Transport
Equipment
Radio
Transport
Equipment
Transport
Radio
Transport
BSC6900 V900R011
Equipment
Radio
Transport
Transport
Radio
Equipment
Transport
Radio
Radio
Radio
Radio
Radio
Radio
BSC6900 V900R011
Equipment
BSC6900 V900R011
Radio
BSC6900 V900R011
Radio
Transport
Transport
Radio
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Equipment
Radio
Transport
BSC6900 V900R011
Radio
BSC6900 V900R011
Radio
BSC6900 V900R011
Radio
BSC6900 V900R011
Radio
BSC6900 V900R011
Radio
BSC6900 V900R011
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Transport
Transport
Transport
Transport
Radio
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Radio
Radio
Radio
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Transport
Radio
Transport
Transport
Radio
Transport
Transport
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Equipment
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Equipment
Radio
Transport
Transport
Transport
Transport
Radio
Radio
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Transport
Transport
Equipment
Equipment
Radio
Radio
Equipment
Equipment
Transport
Equipment
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Equipment
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Transport
BSC6900 V900R011
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Transport
Transport
Transport
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Transport
Transport
Transport
Radio
Radio
Radio
Transport
Transport
Transport
Radio
Transport
Transport
Transport
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
BSC6900 V900R011
Radio
BSC6900 V900R011
Radio
Radio
Transport
Radio
Radio
Radio
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Radio
Radio
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Equipment
Transport
Transport
Radio
Equipment
Radio
Radio
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Transport
Radio
Radio
Transport
Radio
Radio
Equipment
Transport
Radio
Equipment
Transport
Equipment
Transport
Transport
Transport
Transport
Transport
Transport
Radio
Radio
Radio
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Transport
Radio
Radio
Equipment
Radio
Transport
Transport
Transport
Radio
Equipment
Radio
Radio
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Equipment
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Equipment
Equipment
BSC6900 V900R011
Equipment
Radio
Equipment
Radio
Radio
Equipment
Equipment
Equipment
Radio
Radio
Radio
Transport
Transport
Equipment
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Equipment
Transport
Transport
Transport
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport Transport
Transport
BSC6900 V900R011
Equipment
Radio
Radio
Radio
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Transport
Radio
Transport
Transport
Transport
Transport
Transport
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Radio
Transport
Radio
Transport
Radio
BSC6900 V900R011
Equipment
BSC6900 V900R011
Equipment
BSC6900 V900R011
Equipment
Transport
BSC6900 V900R011
Radio
BSC6900 V900R011
Radio
Radio
Radio
Radio
Radio
Equipment
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Transport
Transport
Transport
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Equipment
Equipment
Transport
Equipment
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport Transport
Radio
Radio
Transport
Transport
Equipment
Equipment
Equipment
Equipment
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Equipment
Equipment
Equipment
Transport
Transport
Transport
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Equipment
Equipment
Radio
Transport
Equipment
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment Equipment
Radio
Radio
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Transport
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Equipment
Equipment
Equipment
Equipment
Equipment
Transport
Transport
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Equipment
Radio
Radio
Transport
Radio
Radio
Radio
Radio
Radio
Transport
Equipment
Transport
Radio
Transport
Transport
Transport
Transport
Transport
Transport
Radio
Transport
Transport
Transport
Transport
Transport
Transport
Radio
Radio
Transport
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Equipment
Equipment
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Equipment
Equipment
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Transport
Transport
Transport
Transport
Transport
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Equipment
Equipment
Transport
Transport
Transport
Radio
Radio
Radio
Transport
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Equipment
Radio
Radio
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Equipment
Equipment
Equipment
Equipment
Equipment
Radio
Transport
Transport
Transport
Transport
Transport
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Equipment
Radio
Radio
Equipment
Radio
Radio
Radio
Radio
Radio
Equipment
Radio
Radio
Radio
Equipment
Transport
Radio
Radio
Transport
Equipment
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Equipment
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Equipment
Equipment
Equipment
Radio
Radio
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Transport
Radio
Transport
Transport
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Equipment
Equipment
Equipment
Equipment
Equipment
Radio
Radio
Radio
Radio
Radio
Radio
Equipment
Transport
Equipment
Transport
Transport
Radio
Equipment
Radio
Radio
Equipment
Radio
Equipment
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Equipment
Radio
Radio
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Equipment
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Transport
Transport
Transport
Transport
Transport
Equipment
Equipment
Transport
Equipment
Equipment
Equipment
Equipment
Radio
Radio
Radio
Radio
Radio
BSC6900 V900R011
Transport
Radio
BSC6900 V900R011
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Radio
BSC6900 V900R011
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Radio
BSC6900 V900R011
Transport
Radio
BSC6900 V900R011
Transport
Radio
BSC6900 V900R011
Transport
Radio
BSC6900 V900R011
Transport
Radio
BSC6900 V900R011
Transport
Radio
BSC6900 V900R011
Transport
Radio
BSC6900 V900R011
Transport
Transport
Transport
Equipment
Radio
Radio
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Equipment
Equipment
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Radio
Radio
Equipment
Transport
Transport
Transport
Radio
Transport
Radio
Equipment
Transport
Radio
Transport
Transport
Equipment
Transport
Equipment
Equipment
Equipment
Equipment
Transport
Equipment
Transport
Transport
Radio
Transport
Radio
Equipment
Equipment
Equipment
Radio
Radio
Radio
Radio
Radio
Equipment
Radio
BSC6900 V900R011
Radio
Transport
Equipment
Radio
Radio
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Equipment
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Transport
Transport
Transport
Radio
Transport
Radio
Radio
Radio
Radio
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Equipment
Equipment
Transport
Equipment
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Transport
Transport
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Equipment
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Radio
Radio
Radio
Equipment
Transport
Transport
Transport
Radio
Transport
BSC6900 V900R011
Transport
Radio
Radio
Radio
Radio
Radio
Transport
Equipment
Radio
Radio
Radio
Equipment
Radio
Radio
Transport
Radio
Radio
Transport
Transport
Transport
Transport
Transport
Equipment
Equipment
Equipment
Transport
Transport
Equipment
Transport
Transport
Equipment
Equipment
Transport
Transport
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Equipment Equipment
Equipment
Equipment
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Equipment
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment Equipment
Radio
Equipment
Equipment
Radio
Equipment
Equipment
Radio
Radio
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Equipment
Equipment
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Transport
Radio
Equipment
Radio
Radio
Radio
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Equipment
Equipment
Transport
Equipment
Transport
Radio
Radio
Radio
Radio
Radio
Equipment
Radio
Radio
Radio
Radio
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Equipment
Radio
Radio
Radio
Radio
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Equipment
Equipment
Radio
Radio
Radio
Equipment
Equipment
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Equipment
Equipment
BSC6900 V900R011
Equipment
Transport
Radio
Transport
Transport
BSC6900 V900R011
Transport
BSC6900 V900R011
Transport
BSC6900 V900R011
Transport
BSC6900 V900R011
Transport
BSC6900 V900R011
Transport
BSC6900 V900R011
Transport
BSC6900 V900R011
Transport
BSC6900 V900R011
Transport
BSC6900 V900R011
Transport
BSC6900 V900R011
Transport
Equipment
Equipment
Radio
Equipment
Equipment
Radio
Radio
Equipment
Equipment
Radio
Equipment
Radio
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Transport
Transport
Transport
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Equipment
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Transport
Radio
Radio
Transport
Radio
Radio
Radio
Radio
Radio
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Equipment Equipment
BSC6900 V900R011
Transport
BSC6900 V900R011
Transport
BSC6900 V900R011
Equipment
BSC6900 V900R011
Equipment
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Transport
Equipment Equipment
Transport
Transport
Transport
Transport
Radio
Transport
Transport
BSC6900 V900R011
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Transport
Transport
Transport
Transport
BSC6900 V900R011
Equipment
BSC6900 V900R011
Equipment
Transport
Transport
Equipment
Transport
Transport
Radio
Equipment
Radio
Radio
Radio
Radio
Radio
Equipment
Radio
Equipment
Equipment
Equipment
Equipment
Equipment
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Transport
Radio
Radio
Transport
Transport
Transport
Transport
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Transport
Equipment
Transport
Radio
Transport
Transport
Transport
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Transport
Transport
Radio
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Equipment
Radio
Radio
Transport
Radio
Transport
Transport
Transport
Transport
Transport
Radio
Radio
Transport
Transport
Transport
Transport
Transport
Transport
Equipment
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Transport
Transport
Transport
Radio
Radio
Radio
Radio
Equipment
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Equipment
Equipment
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Transport
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Transport
Radio
Transport
Transport
Transport
Transport
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Transport
Radio
Radio
BSC6900 V900R011
Radio
Equipment
Equipment
Radio
Radio
Radio
Radio
Equipment
Transport
Transport
Transport
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Transport
Radio
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio
Equipment
Equipment
Equipment
Equipment
Equipment
Equipment
Transport
Transport
BSC6900 V900R011
Radio
Radio
Radio
Radio
Radio
Radio
Radio
Versions earlier than BSC6900 V900R011 Versions earlier than BSC6900 V900R011
Radio Equipment
Equipment
Radio
Radio
Radio
Transport
Transport
Equipment
Transport
Equipment
Transport
Equipment
Transport
Radio
Equipment
Equipment
Radio
Equipment