Professional Documents
Culture Documents
M. Tech Geotechnical Engineering Lab Manual
M. Tech Geotechnical Engineering Lab Manual
M. Tech Geotechnical Engineering Lab Manual
3.Core Cutter
Item Code: ASI-815 Model: SL701 Suitable to cut/Drill cores of Concrete, Rocks, Stoned, Tiles or the similar material. The machine is suitable for core samples of size upto 150mm diameter. With the help of thin Walled Diamond Bits which are at extra cost. The machine has sturdy base with pillar support in which rack and pinion is provided for adjustment in height and penetration assembly. The leveling screws are provided at the base. Fro gripping the sample in position suitable grips provided. A suitable electric motor, standard make is fitted in the machine with cooling arrangement with water. The base frame is also fitted with wheels for ease fo transportation. Dimension approx. are as under: Height Base 1300mm 600 x 1200mm
Head travel on rack350mm Drill Speeds Drill Speeds 900rpm for soft samples and
Accessories: (1) Thin wall diamond bits. (2) Core Barrel. Diesel engine model: Same as above but works on diesel engine and thus can be used at site also. Plastic Limit Set
Item Code: ASI-801 Model: SL301 As Per IS: 2720 (PART-VII) ASTM D 427, BS:1377 AASHO 190. Moisture contents at which soil has smallest plasticity is called limit. For determination purpose plastic limit is defined as the water content at which a soil will just to crumble when rolled into a thread of 3mm. dia. The complete set consists of one each:Glass plate 20cm x 115cm having ground ends and one side frosted. Brass of stainless steel rod 3mm dia. x 150mm long. Flexible spatula. Set of 6 moisture containers. Porcelain basin 150mm dia. Plastic wash bottle 500ml.
Result includes a. Load Vs Displacement b. Maximum load c. Maximum Displacement d. UTS value e. Proof stress (with Extenso meter) Data entry through push button type keyboard
Safety Features: Machine stops after specimen failure Safety against Over travel of piston Surge Protector Auto Machine Diagnosis Safety against overload Universal testing machine (hydraulic electronic microprocessor based version)
Model Testing Table 200 mm 0 Testing Table 200 mm 0 with 'V' grove for round jobs-10 to 80 mm dia Ball holder 5 mm Ball holder 10 mm Test Block H B-5/750 Test Block H B-10/3000 Brinell Microscope
Allen Spanner Elescopic cover for elevating screw protection Instruction Manual
Rockwell Hardness Tester
Item Code: ASI-AMT-5
1 pc. 1 set
1 book
AMTS :Manual weight selection an Manual zero adjustment of Dial gauge. AMTSA:Manual weight selection with Automatic zero setting dial Gauge. AMT SB:Automatic weight selection with automatic zero setting Dial gauge. AMT Sc :Arrangement similar to AMT 5B with one additional weight of I 8705kg for Brinell tests. AMT SD :Arrangement similar to AMT 5B with two additional weight of 187.5 kg and 250 kg for Brinell tests on this machine small pin having dia 2mm can be tested as plunger is guided with a set of six bearings. AMT SE:Rockwell Superficial Hardness Tester with automatic zero setting dial gauge, manual load selection. The major load are N scale besides all fifteen Rockwell Superficial scales.Can be used with this tester. AMT SF:This model is double purpose Hardness Tester suitable for Both Rockwell & Rockwell Superficial hardness test.The Major load of I 5,30,45,60,100, and I 50 kg are applied.
Standard Accessories
Model 4M15 AMT5C AMT5D AMT5E AMT5F 5A,5B Testing Table 50mm 0 1Pc 1Pc 1 Pc 1 Pc 1Pc Testing Table 40mm 0 with 'V' groove for round jobs 6 to 45 mm 0 1Pc 1Pc 1Pc 1Pc 1Pc Diamond indentor 120 1Pc 1Pc 1Pc 1Pc 1Pc Stell ball indenter 1/16" 1Pc 1Pc 1Pc 1Pc 1Pc Test block Rockwell'c 1Pc 1Pc 1Pc NIL 1 Pc Test block Rockwell 'B' 1Pc 1Pc 1Pc NIL 1Pc Tet block Rockwell Superficial N NIL NIL NIL 1Pc 1Pc Mien Spanners 2 Pca 2 Pcs 2 Pcs 2 Pcs 2 Pcs Clamping device 1Pc 1Pc 1 Pc 1Pc 1Pc Dash pot oil 1 bottle 1 bottle 1 bottle 1 bottle 1 bottle Instructional Mannual 1 book 1 book 1 book 1 book 1 book Brinell Microscope NIL 1 Pc 1 Pc NIL NIL Steil Ball Indentor 2.5mm NIL 1 Pc 1 Pc NIL NIL Stell Ball Indentor 5 mm NIL 1 Pc 1 Pc NIL NI! Test Block H B-2.5/187.5 NIL 1 Pc 1 Pc NIL NL
Torque Compensated Motors Maintenance Free Gear Box Auto Range Selection with Range Selector Wheel (Optional) 3 or 4 Torque Ranges for Higher Accuracy (Optional) Load-unload Capability Variable Speed Drive (Optional) ASI Torsion Testing Machine is designed for conducting Torsion and Twist Tests on various metal wire, tubes sheet materials. Torque measurement is by pendulum Dynamo meter System. Torque ranges can be adjusted. Torque can be applied to specimen by geared motor through gear box. Autographic recorder can be provided to know the relation between torque and angle of twist on specific request. The accuracy of the torque induction + 1 % of the true torque