Professional Documents
Culture Documents
Molcular Sieve 13X LTG
Molcular Sieve 13X LTG
Specifications
GMGB Molsieve 13X-LTG
Nominal Dia :lOA0 lAo = 10-8 cm
Form: Cylindrical pettets "&Spheres
1.5 mm dia 3.0 mm dia 2-4 mm spheres
cylindrical pellets Cylindrical Pellets
Unit Range Typical Range Typical Range
Equilibrium Water Adsorption'
Capacity at 30 deg.C
15% RH % 21.5-26 22.5 21.5-26 23.0 23.0-27 25.5
w/w
75% RH % 24-29.5 27.5 24-29 27.5 26-29.5 28.0
w/w
Thermal Stability after 600 % 21.5-26 22.5 21.5-26 23.0 23.0-270 25.5
Deg.C Equilibrium Water w/w
Adsorption Capacity at 30
Deg.C & 15% RH
CO2 Ads. Capacity under 760 % 19.0- 20.5 19.0- 20.5 20-25 22.5
mm Hg. & at 30 Deg.C w/w 21.5 21.5
Crushing Stength (Active) Kg. 3.0-7.0 5.0 6-12 8.0 3-7 4.5
Attrition Loss on Tumbling % 0.02- 01 0.02- 0.15 0.02-0.25 0.1
w/w 0.15 0.25
Free Moisture (Max.) % 1.5 - 1.5 - 1.5 -
w/w
Bulk Density gms/ 0.58- 0.6 0.58- 0.6 0.64-0.7 0.66
cc 0.64 0.64
Bed Crushing Strength % 80-90 84.0 80-90 86.0 80-90 85.0
w/w
Packing:
Molecular Sieves GMGB 13X-LTG are packed for industrial use in airtight MS
drums under hot conditions with proper sealing arrangement so that there is no
ingress of moisture during storage and transport. Standard Packing: 200/210 Lit.
drum size 570 x 860 (H) mID.
Life:
MOLSIEVES 13X-LTG has infinite shelf life, when stores in packed condition.
The active service life would depend, however, on the operating conditions of
the plant, actual application, and the usage by the customer.
Loading: .
Regeneration:
MOL Sieves 13X-LTG should be regenerated thermally or by evacuation with
simultaneous purge. For thermal regeneration, the adsorbent may by heated to 110
- 120 deg.C for removal of CO2. For simultaneous removal of H2O and CO2,
the adsorbent should be heated to 160-200 deg.C However, the exact regeneration
condition (temperature, purge gas flow, etc.) depends on the application, feed
quality and other operating conditions.
Applications:
1. Simultaneous removal of Moisture and CO2 from feed air or Air Separation
/ Cryogenic Plant.
2. Mercaptans removal from gaseous streams.
3. Process air drying of dew point less than (minus) - 60 deg.C for suphonation
plant.
4. Sweetening of Natural Gas
5. Removal of H2S from gaseous streams.
Website : www.gmgbc.in
Vile-Parle (E), Mumbai-400 057
Tel:
Fax:
E-mail:
+91-22-26835130, 32979944
+91-22-26835874
molsieve@gmgb.net,silica@gmgb:net