Professional Documents
Culture Documents
Mobile Cranes-Power Driven: NIOEC-SP-90-77
Mobile Cranes-Power Driven: NIOEC-SP-90-77
DOCUMENT CODE
PLAN/PRJ/SUB UNIT PHASE DISCIPLANE DOCUMENT TYPE SERIAL NO. REV. NO. NO. OF PAGES: 5 DATE
NIOEC
000
EG
GN
SP
9077
A0
JULY, 2005
THIS SPECIFICATION IS THE PROPERTY OF NATIONAL IRANIAN OIL ENGINEERING & CONSTRUCTION COMPANY. IT IS CONFIDENTIAL AND ALL RIGHTS RESERVED TO THE OWNER. NEITHER WHOLE NOR ANY PART OF THIS DOCUMENT MAY BE DISCLOSED TO ANY THIRD PARTY, REPRODUCTED, STORED IN ANY RETRIEVAL SYSTEM OR TRANSMITTED IN ANY FORM OR BY ANY MEANS WITHOUT THE PRIOR WRITTEN CONSENT OF THE NATIONAL IRANIAN OIL ENGINEERING & CONSTRUCTION COMPANY
JULY, 2005
NIOEC-SP-90-77(0)
JULY, 2005
NIOEC-SP-90-77(0)
REVISION INDEX
REV. PAGE
REV. PAGE
REV. PAGE
REV. PAGE
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25
26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50
51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75
76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
NOTES:
1) 2) 3) 4) THIS SHEET IS A RECORD OF ALL REVISIONS TO THIS SPECIFICATION. REMARKS RELATED TO EACH REVISION SHOW A BRIEF DESCRIPTION. THESE REMARKS SHALL BE INTERPRETED IN CONJUNCTION WITH THE REVISED TEXT MARKED BY REVISION NUMBERS. WHEN APPROVED EACH REVISION SHALL BE CONSIDERED AS A PART OF THE ORIGINAL DOCUMENT. NUMBER OF PAGES EXCLUDES THIS SHEET AND THE COVER SHEET.
REV.
DATE
PREPARED
CHECKED
APPROVED
AUTHORIZED
JULY, 2005
CONTENTS:
0. 1. 2.
INTRODUCTION ......................................................................................................................2 SCOPE.........................................................................................................................................2 REFERENCES ...........................................................................................................................2 2.1. Equivalent to IPS Standard...............................................................................................4 3. UNITS ..........................................................................................................................................4 4. CONFLICTING REQUIREMENTS .......................................................................................4
JULY, 2005
NIOEC-SP-90-77(0)
0. INTRODUCTION To satisfy the requirements of this NIOEC Specification, Iranian Petroleum Standard IPS-MGN-340 with the modifications as specified herein after shall be strictly followed. Articles 1 through 4 of this document replace entirely the related articles in the referenced IPS Standard. 1. SCOPE - This Specification specifies the requirements for the design, construction and testing of powerdriven mobile and semi-mobile cranes either road wheel mounted, crawled mounted, or truck mounted, including any combination of the following characteristics, for use in refinery/ oil plant, distribution depots, pump stations and pipelines. a) Fully mobile. b) Semi-mobile. c) Fully slewing. d) Part-slewing. e) Non-slewing. - The Specification covers articulated jib cranes mounted on load carrying vehicles and generally referred to as lorry loaders. - No deviations or exceptions from this Specification shall be permitted without the written approval of the Company. The intended deviations shall be listed separately by the Vendor and supported by reasons thereof for purchasers consideration. - Compliance by the crane Manufacturer with the provisions of this Specification does not relieve him of the responsibility of furnishing the cranes and accessories of proper design, to meet all requirements at specified service conditions. - The Manufacturer shall supply with the tender the appropriate information indicated in Appendix B regarding the construction of the crane. 2. REFERENCES Throughout this Specification the following dated and undated standards/ codes are referred to. These referenced documents shall, to the extent specified herein, form a part of this Specification. For undated references, the latest edition of the referenced document (including any supplements and amendments) applies. For dated references, the edition cited applies. The applicability of changes in dated references that occur after the cited date shall mutually be agreed upon by NIOEC and the Vendor/Contractor. AGMA (AMERICAN GEAR MANUFACTURERS ASSOCIATION) 210.02 211.02 220.02 "Surface Durability of Spur Gear Teeth" "Surface Durability of Helical and Herring Bone Gear" "Rating the Strength of Spur Gear Teeth"
AISC (AMERICAN INSTITUTE FOR STEEL CONSTRUCTION) "Specification for the Design Fabrication and Erection of Structural Steel for Buildings"
JULY, 2005
NIOEC-SP-90-77(0)
AISI (AMERICAN IRON AND STEEL INSTITUTE) API (AMERICAN PETROLEUM INSTITUTE) "Specification for Wire Ropes"
SPEC 9A
ASME (AMERICAN SOCIETY OF MECHANICAL ENGINEERS) Boiler and Pressure Vessel Code, Sec. IX "Welding and Brazing Qualification" ASTM (AMERICAN SOCIETY FOR TESTING AND MATERIALS) A 320 A 578 A 770 E 186 E 280 E 446 "Specification for Alloys-Steel Bolting Materials for Low Temperature Service" "Specification for Straight-Beam Ultrasonic Examination of Plain and Clad Steel Plates for Special Applications" "Specification for Through-Thickness Tension Testing Steel Plates for Special Applications" "Referenced Radiographs for Heavy-Walled (51 to 114 mm) Steel Casting" "Referenced Radiographs for Heavy-Walled (114 to 305 mm) Steel Castings" "Referenced Radiographs for Steel Castings up to 51 mm in Thickness"
AWS (AMERICAN WELDING SOCIETY) D 1.1 D 14.3 BSI "Structural Welding Code" "Specification for Welding Earthmoving and Construction Equipment"
(BRITISH STANDARDS INSTITUTE) "Specification for Classification, Stress Calculations and Design Criteria for Structures"
2573: Part 1
IPS
(IRANIAN PETROLEUM STANDARDS) Low Voltage Cables and Wires Medium and High Voltage Power Cables General Electric Items "Induction Motors" "Generators" "Cables" "Hooks, Shackles, Eye Bolts and chains" "Internal Combustion Reciprocating Engines" 3
JULY, 2005
NIOEC-SP-90-77(0)
NIOEC-SP (NIOEC SPECIFICATIONS) NIOEC-SP-00-10 NIOEC Specification for Units NIOEC-SP-60-02 NIOEC Specification for Low Voltage Induction Motors" NIOEC-SP-60-05 NIOEC Specification for Medium & high Voltage power Cables NIOEC-SP-60-16 NIOEC Specification for Low Voltage Cable and Wires" NIOEC-SP-60-23 NIOEC Specification for Turbine Driven Synchronous Generators" NIOEC-SP-60-31 NIOEC Specification for Electrical Bulk Material" SAE (SOCIETY OF AUTOMOTIVE ENGINEERS) "Fasteners, Mechanical and Material Requirements for Externally Threaded"
J 429
2.1. Equivalent to IPS Standard Substitute the following IPS Standards as referred to throughout IPS-M-GN-340 to relevant NIOEC's Specifications as follows: IPS Standard IPS-M-GN-340 IPS-M-EL-271 IPS-M-EL-272 IPS-M-EL-290 IPS-M-EL-132 IPS-M-EL-138 IPS-M-EL-270 IPS-M-GN-160 IPS-M-PM-290 Relevant NIOEC Specification NIOEC-SP-90-77 NIOEC-SP-60-16 NIOEC-SP-60-05 NIOEC-SP-60-31 NIOEC-SP-60-02 NIOEC-SP-60-23 NIOEC-SP-60-16
3. UNITS International system of units (SI) shall be used in accordance with NIOEC-SP-00-10, unless otherwise specified. 4. CONFLICTING REQUIREMENTS In case of conflict between documents relating to the inquiry or order the following priority of documents shall apply: First priority : Purchase order and variations there to Second priority : Data sheets Third priority : This specification
JULY, 2005
NIOEC-SP-90-77(0)
All conflicting requirements shall be referred to purchaser in writing. The Purchaser will issue confirmation document if needed for clarification.