Professional Documents
Culture Documents
Kubandbuc Syssol
Kubandbuc Syssol
Codan provides a range of L-Band BUCs of varying power ranges that operate in basic single-BUC systems or redundancy systems. These BUCs operate in the C-Band and Ku-Band frequency ranges. For information on the C-Band range of products see Application Note 17-60114. This Application Note describes the basic BUC systems, how they provide solutions to typical operating scenarios, then builds on this to describe the redundancy systems. Product listings, standard accessories and options are also provided. Interconnection drawings are provided in this Application Note. Installation information is provided separately. There is an index at the end of this Application Note to assist you in finding information.
Page 1 of 44
APPLICATION NOTE
Contents
Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Codan solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Outcomes for Codan solutions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 System scenarios. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Modem unable to supply 10 MHz reference and DC power for BUC and LNB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Modem unable to supply DC power for BUC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Typical configurations for basic BUC systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 M&C solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Standard M&C interfaces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Additional M&C interfaces in the 7700/7900 series BUCs. . . . . . . . . . . . . . . . . . . . 16 BUC products, accessories and options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Shipping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 BUC redundancy system solutions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Types of systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Redundancy products, accessories and options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Shipping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Interconnection drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Index List of figures Figure 1: Figure 2: Figure 3: Frequency conversion plans. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Typical configuration of a 6550 IF Interface Unit. . . . . . . . . . . . . . . . . . . . 12 Typical configuration of a 6550 IF Interface Unit with a 6580B BUC Power Supply module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Figure 4: Typical configuration of a 6580B BUC Power Supply module . . . . . . . . . 13 Figure 5: Typical configuration of a 6582/7580 BUC Power Supply module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Figure 6: Typical configuration of a DuraComm IDU Power Supply module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Figure 7: 7586L Controller, Tx Only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Figure 8: 7586L Controller, Tx + Rx . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Figure 9: Transmit or receive RF W/G switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Figure 10: Layout of BUC redundancy switching systemTx Only, AC-powered. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
17-60115 Issue 2, October 2009
Page 2 of 44
Figure 11: Layout of BUC redundancy switching systemTx and Rx, AC-powered . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 Figure 12: Layout of BUC redundancy switching systemTx Only, DC-powered . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 Figure 13: Layout of BUC redundancy switching systemTx and Rx, DC-powered . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36 Figure 14: Layout of BUC redundancy switching systemTx Only, DC-powered (DuraComm IDU Power Supply module) . . . . . . . . . . . . . .37 Figure 15: Layout of BUC redundancy switching systemTx and Rx, DC-powered (DuraComm IDU Power Supply module) . . . . . . . . . . . . . .38 List of tables Table 1: Table 2: Table 3: Table 4: Table 5: Table 6: Table 7: Table 8: Table 9: Table 10: Table 11: Table 12: Table 13: Table 14: Table 15: RF output frequencies for inverting and non-inverting Ku-Band BUCs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 Summary of BUC system solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Typical configurations for basic BUC systems . . . . . . . . . . . . . . . . . . . . . .11 Ku-Band BUC products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Standard accessories for Ku-Band products . . . . . . . . . . . . . . . . . . . . . . . .21 Options for Ku-Band BUC products . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21 Summary of Ku-Band BUC redundancy system solutions . . . . . . . . . . . . .30 Types of redundancy systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Output power and corresponding input power requirements (LBUC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31 Output power and corresponding input power requirements (MBUC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Output power and corresponding input power requirements (RBUC). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Ku-Band redundancy switching systems (Tx Only) . . . . . . . . . . . . . . . . . .39 Ku-Band redundancy switching systems (Tx and Rx) . . . . . . . . . . . . . . . .40 Options for Ku-Band redundancy switching systems . . . . . . . . . . . . . . . . .41 Interconnection drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Page 3 of 44
Introduction
BUC-based satellite earth stations sometimes require more planning and consideration than 70/140 MHz IF transceiver-based systems. The operation of a BUC is more integrated with the other items of equipment in an earth station when compared with a 70/140 MHz transceiver. In order to function properly, a BUC must be provided with a 10 MHz reference signal, power and, optionally, an FSK M&C signal. In most cases, these three signals are fed to the BUC via the one transmit IF cable. The provision of these signals is guided by de facto industry standards and practices, which have evolved over the last few years. There are still times, however, when a systems integrator may discover that elements of a system are not fully compatible because they are not able to provide one or more of these critical signals.
Codan solutions
To solve these system integration problems, Codan has developed a range of equipment that assist in offering solutions. Spectrum inverting and non-inverting BUCs Codan has introduced frequency non-inverting models to its range of 6900 BUCs, complementing the 7900 series. VSAT systems integrators can select from either spectrum inverting or non-inverting, standard or extended Ku-Band BUCs from 4 W to 40 W. The table below defines the relationship between the modems IF input frequency, the BUCs LO and RF output frequencies. Non-inverting BUCs are indicated by a -NI at the end of the ordering part number (see page 18, BUC products, accessories and options). All other BUCs are inverting.
Page 4 of 44
Figure 1:
Inverting BUC
fRF
fIF |fLO-fRF|
fRF
fIF |fRF-fLO|
RF output frequencies for inverting and non-inverting Ku-Band BUCs RF output frequency (MHz) Inverting BUC Standard band (fixed LO 15450 MHz) 14500 to 14000 14500 to 14000 Extended band (fixed LO 15450 MHz) 14500 to 14000 14500 to 14000 to 13750 Non-inverting BUC Standard band (fixed LO 13050 MHz) 14000 to 14500 14000 to 14500 Extended band (fixed LO 12800 MHz) 13750 to 14250 13750 to 14250 to 14500
Standard
Extended
CAUTION
When a standard band modem is used with an extended band noninverting BUC, the upper 250 MHz of the band is not available.
Page 5 of 44
For inverting BUCs, find the required setting for the IF frequency on your modem using the following equation: fIF = fLO fRF For example, if an RF output frequency of 14250 MHz is required from an inverting BUC that has an LO frequency of 15450 MHz, you must set the IF frequency on your modem to 1200 MHz. For non-inverting BUCs, find the required setting for the IF frequency on your modem using the following equation: fIF = fRF fLO For example, if an RF output frequency of 14050 MHz is required from a non-inverting BUC that has an LO frequency of 12800 MHz, you must set the IF frequency on your modem to 1250 MHz. 6550 IF Interface Unit Features include: 19" rack mounted, 1 RU high 10 MHz reference for BUC and LNB 48 V DC power for BUC via transmit IF coaxial cable capacity to power up to 4 W LBUC 18 V DC power for LNB via receive IF coaxial cable modem FSK M&C communications to/from BUC PC RS232 M&C communications to/from BUC via FSK
6580B BUC Power Supply module Features include: weatherproof, outdoor pole-mounted 48 V DC power for BUC via transmit IF coaxial cable or separate screw terminals auxiliary 48 V DC power for accessories via screw terminals capacity to power up to 25 W LBUC passes IF, 10 MHz, FSK 120 V AC or 240 V AC switched operating temperature range of 40 to +55C
Page 6 of 44
6582 BUC Power Supply module Features include: weatherproof, outdoor pole-mounted 48 V DC power for BUC via MS 2-pin female connector capacity to power any DC-powered BUC 120 V AC or 240 V AC switched, fuse protected heavy-duty transformer-based PSU operating temperature range of 40 to +50C
7580 BUC Power Supply module Features include: weatherproof, outdoor boom-mounted 48 V DC power for BUC via MS 2-pin female connector auxiliary 48 V DC power for accessories via mini MS 2-pin female connector capacity to power any DC-powered BUC 95 to 265 V AC auto-ranging heavy-duty switched mode PSU operating temperature range of 40 to +50C
DuraComm IDU Power Supply module (78-16044) Features include: indoor rack-mounted (2 RU) 48 V DC power for BUC via transmit IF coaxial cable 48 V DC power for BUCs via screw terminals capacity to power up to 25 W LBUC and 40 W RBUC passes IF, 10 MHz, FSK 120 V AC or 240 V AC switched switched mode PSU A small DuraComm Switchmode Power Supply Outdoor Unit (SMPS ODU, 78-16043) powers the 7586L Controller in redundancy systems that use AC-powered BUCs.
NOTE
Page 7 of 44
6550 IF Interface Unit Built-in DuraComm IDU Built-in Power Supply module 6580B BUC Power Supply module 6582 BUC Power Supply module 7580 BUC Power Supply module Built-in
Yes, up to 25 W via coaxial Pass through via IF cable, or up to 40 W via Tx IF cable screw terminals Yes, up to 25 W via coaxial Pass through via IF cable, or up to 40 W via Tx IF cable DC cable Yes, for all DC-powered BUCs via DC cable Yes, for all DC-powered BUCs via DC cable No No
No
No No
No No
Page 8 of 44
System scenarios
Modem unable to supply 10 MHz reference and DC power for BUC and LNB
This scenario arises for a number reasons: Modem cannot supply 10 MHz reference L-Band IF combiners cannot pass the DC power and/or 10 MHz reference from the modem Modem cannot supply the 48 V DC required by some BUCs Optical fibre Interfacility Links (IFLs) replace coaxial cable IFLs
Modem cannot supply 10 MHz reference First, it is not uncommon for SCPC modems to have both a standard and a high-stability frequency reference option. The frequency stability and phase noise performance of the standard reference usually makes it unsuitable for use as a BUC frequency reference. Secondly, some proprietary indoor units (IDUs) are designed to drive BUCs with internal DRO-based local oscillators. In some circumstances (e.g. at the satellite beam edge with a high data rate), an alternative non-DRO based BUC may be required. L-Band IF combiners cannot pass the DC power and/or 10 MHz reference from the modem Multi-carrier applications require the use of L-Band IF combiners. Most off-the-shelf combiners are unable to pass the DC power and 10 MHz reference signals from the modem. A separate unit is required to supply these signals to the BUC and LNB. Modem cannot supply the 48 V DC required by some BUCs This is a common problem with modems or IDUs designed to drive low-power BUCs (typically 1 W to 2 W). These IDUs are typically only designed to provide voltages of 24 V or less. This issue may also arise if the modem does not have a 48 V DC BUC power supply option, or has a 48 V DC BUC power supply option of insufficient rating.
Page 9 of 44
Optical fibre IFLs replace coaxial cable IFLs Optical fibre IFLs may be used when: the IFL length is too large to cope with the L-Band IF signal loss of a coaxial cable there are concerns about voltage potential differences and/or electrical safety electromagnetic interference at L-Band frequencies may be a problem they cannot provide DC power for the BUC they may not provide DC power for the LNB most cannot carry the 10 MHz reference signal from the modem to the BUC and LNB
Solution The 6550 IF Interface Unit can be used to provide 48 V DC power to both the LNB and BUC (up to 4 W) and the 10 MHz reference signals. The 6550 can also be used with higher power, externally powered BUCs, as they ignore the 48 V DC on the transmit IF cable. This means that the 6550 can be used in conjunction with the 6580B, 7580, or DuraComm IDU Power Supply modules if the higher capacity 48 V DC power is required. The 6550 also provides BUC monitor and control access (without the need for an additional M&C cable) via the FSK M&C signal carried on the transmit IF cable. See Figure 2 on page 12 and Figure 3 on page 12 to view the various ways that the 6550 may be used.
Page 10 of 44
Solution Codans 6580B and DuraComm IDU Power Supply modules have been designed specifically for these instances and can be used to provide 48 V DC power for the BUC (up to 25 W) via the IFL. The 6580B and DuraComm IDU Power Supply modules block any DC voltage from the modem and multiplexes 48 V DC onto the L-Band transmit IF cable to power the BUC. Since it is transparent to the 10 MHz reference and FSK M&C signals, normal operation is unaffected by the addition of the 6580B or DuraComm IDU Power Supply modules. The 6580B or DuraComm IDU Power Supply module can also be used to provide 48 V DC via an external connector when fitted to BUCs up to 25 W. The 6582 or 7580 BUC Power Supply module may be used to provide 48 V DC to BUCs with external connectors only. In most cases these PSUs will be used for BUCs requiring high DC power. Figure 5 on page 13 shows a typical configuration for the 6582 or 7580 BUC Power Supply module. Figure 3 on page 12 and Figure 4 on page 13 show two possible system configurations using the 6580B. A configuration for the DuraComm IDU Power Supply module is shown in Figure 6 on page 14.
Page 11 of 44
Figure 2:
Outdoor
L-Band Tx IF only
BUC
Tx RF
Modem
Data
AC
Figure 3:
Typical configuration of a 6550 IF Interface Unit with a 6580B BUC Power Supply module
Outdoor Alternate 48 V DC supply with external connector option (if power via IF cable not used)
48 V DC L-Band Tx IF only L-Band Tx IF, 10 MHz Ref, 48 V DC, FSK (optional) Power inserter and DC block
BUC
Tx RF
Modem
Data
L-Band Rx IF only
AC
Page 12 of 44
Figure 4:
Indoor AC
Outdoor Alternate 48 V DC supply with external connector option (if power via IF cable not used)
48 V DC L-Band Tx IF, 10 MHz Ref, FSK (optional) Power inserter and DC block Data Modem
BUC
Tx RF
Figure 5:
Indoor
Outdoor
AC AC
L/RBUC
Tx RF
Data
Modem LNB Rx RF
Page 13 of 44
Figure 6:
Indoor AC
Outdoor Alternate 48 V DC supply with external connector option (if power via IF cable not used)
48 V DC L-Band Tx IF, 10 MHz Ref, FSK Power inserter and DC block Data Modem L-Band Tx IF, 10 MHz Ref, 48 V DC, FSK
LBUC
Tx RF
LNB Rx RF
Page 14 of 44
M&C solutions
Connections to the following interfaces may be permanent or temporary, depending on your requirements.
Page 15 of 44
Page 16 of 44
6560 Hand-held Controller The 6560 provides local control and monitoring facilities of the BUCs via its M/C connector, or via the M&C 1 SERIAL or M&C 2 SERIAL connectors of the 7586L Controller.
Page 17 of 44
Table 4: Description 4W
LBUC, 4 W, Ku-Band, W/G, Extended, 24 V DC-powered via IF connector, CE LBUC, 4 W, Ku-Band, W/G, Extended, 48 V DC-powered via IF connector, CE 8W LBUC, 8 W, Ku-Band, W/G, Standard, 48 V DC-powered via IF connector LBUC, 8 W, Ku-Band, W/G, Standard, 48 V DC-powered via external connector LBUC, 8 W, Ku-Band, W/G, Standard, 48 V DC-powered via IF connector, non-inverting LBUC, 8 W, Ku-Band, W/G, Standard, 48 V DC-powered via external connector, non-inverting LBUC, 8 W, Ku-Band, W/G, Extended, 48 V DC-powered via IF connector, CE LBUC, 8 W, Ku-Band, W/G, Extended, 48 V DC-powered via external connector, CE LBUC, 8 W, Ku-Band, W/G, Extended, 48 V DC-powered via IF connector, CE, non-inverting LBUC, 8 W, Ku-Band, W/G, Extended, 48 V DC-powered via external connector, CE, non-inverting
6904-W/E-24/IF-CE 6904-W/E-48/IF-CE
08-06336-002 08-06336-001
6.0 6.0
6908-W/S-48/EX-NI
08-06253-004
6.0
6908-W/E-48/EX-CE-NI
08-06252-005
6.0
Page 18 of 44
Table 4: Description 16 W
Ku-Band BUC products (cont.) Ordering part number Component part number Net mass (kg)
LBUC, 16 W, Ku-Band, W/G, Standard, 48 V DC-powered via IF connector LBUC, 16 W, Ku-Band, W/G, Standard, 48 V DC-powered via external connector LBUC, 16 W, Ku-Band, W/G, Standard, 48 V DC-powered via IF connector, non-inverting LBUC, 16 W, Ku-Band, W/G, Standard, 48 V DC-powered via external connector, non-inverting LBUC, 16 W, Ku-Band, W/G, Extended, 48 V DC-powered via IF connector LBUC, 16 W, Ku-Band, W/G, Extended, 48 V DC-powered via external connector LBUC, 16 W, Ku-Band, W/G, Extended, 48 V DC-powered via IF connector, non-inverting LBUC, 16 W, Ku-Band, W/G, Extended, 48 V DC-powered via external connector, non-inverting MBUC M1, 16 W, Ku-Band, W/G, Standard, AC-powered via external connector, CE MBUC M1, 16 W, Ku-Band, W/G, Extended, AC-powered via external connector, CE
6916-W/S-48/EX-NI
08-06761-008
6.0
6916-W/E-48/EX-NI
08-06761-010
6.0
6916-W/S-AC/EX-CE 6916-W/E-AC/EX-CE
08-06094-001 08-06094-002
12.0 12.0
Page 19 of 44
Table 4: Description 25 W
Ku-Band BUC products (cont.) Ordering part number Component part number Net mass (kg)
LBUC, 25 W, Ku-Band, W/G, Standard, 48 V DC-powered via external connector MBUC M1, 25 W, Ku-Band, W/G, Standard, AC-powered via external connector, CE MBUC M1, 25 W, Ku-Band, W/G, Extended, AC-powered via external connector RBUC, 25 W, Ku-Band, W/G, Standard, 48 V DC-powered via external connector, non-inverting, LAN interface RBUC, 25 W, Ku-Band, W/G, Extended, 48 V DC-powered via external connector, non-inverting, LAN interface 40 W RBUC, 40 W, Ku-Band, W/G, Standard, 48 V DC-powered via external connector, non-inverting, LAN interface RBUC, 40 W, Ku-Band, W/G, Extended, 48 V DC-powered via external connector, non-inverting, LAN interface
7925-W/E-48/EX-NI
08-06887-002
7.0
7940-W/S-48/EX-NI
08-06943-001
7.0
7940-W/E-48/EX-NI
08-06943-002
7.0
Page 20 of 44
Table 5: Description
Standard accessories for Ku-Band products Ordering part number Included Included Included Included Component part number 15-44038-EN 15-40202 15-40206 08-06448-005 Net mass (kg) 0.5 0.2 0.1 0.2
Reference Manual, Block Up Converter Systems Kit, Connector Sealing Kit, Flange, WR75 with thin O-ring and 25 mm screws Cable, DC, Lo-Pwr, Mini 8-2S to Free end (LBUC/Accessories), 5 m (supplied with external DC-powered LBUCs only) Cable, DC, Hi-Pwr, 16-11S to Free end (RBUC), 5 m (supplied with external 48 V DC-powered RBUCs only) Cable, AC mains, 1 Connector, 10 m (supplied with AC-powered BUCs only)
Included
08-06847-005
0.5
Included
08-06201-010
1.2
NOTE
The PC serial cable and LAN cable are not part of the standard BUC package. If you are using a PC to set up the BUC instead of a Hand-held Controller 6560, please order the PC serial cable or LAN cable separately (see Table 6). The universal boom-mounting kit is not part of the standard BUC package. Please order separately, if required (see Table 6). Options for Ku-Band BUC products Ordering part number Component part number 08-05972-002 08-06956-002 08-06956-006 08-06956-050 Net mass (kg) 0.2 0.3 0.5 2.7
NOTE
Table 6: Description
Cable, M&C, Serial, MS14P to DB9 (BUC/Controller), 2 m Cable, M&C, LAN, RBUC/Controller (Indoor/Outdoor), 2 m Cable, M&C, LAN, RBUC/Controller (Indoor/Outdoor), 6 m Cable, M&C, LAN, RBUC/Controller (Indoor/Outdoor), 50 m
Page 21 of 44
Table 6: Description
Options for Ku-Band BUC products (cont.) Ordering part number Component part number 08-06956-100 08-06448-005 08-06974-001 08-06974-007 08-06973-001 08-06973-005 08-05366-010 08-05366-020 08-05366-030 08-05366-050 08-05366-080 15-42072-000 15-42070-000 LNB-Ku-R1 78-12010 LNB-Ku-R2 78-12011 0.5 Net mass (kg) 5.2 0.5 0.5 0.7 0.2 1.2 0.2 0.3 0.4 0.7 1.1 1.2 1.5 0.5
Cable, M&C, LAN, RBUC/Controller (Indoor/Outdoor), 100 m Cable, DC, Lo-Pwr, Mini 8-2S to Free end (LBUC/Accessories), 5 m Cable, DC, Lo-Pwr, Mini 8-2P to 8-2S (PSU AUX/Accessories), 1 m Cable, DC, Lo-Pwr, Mini 8-2P to 8-2S (PSU AUX/Accessories), 7 m Cable, DC, Lo-Pwr, 16-11P to 8-2S (PSU to LBUC), 1 m Cable, DC, Lo-Pwr, 16-11P to 8-2S (PSU to LBUC), 5 m Cable, Coaxial, RF output, 50 Ohm with N-type to N-type plug, 1 m Cable, Coaxial, RF output, 50 Ohm with N-type to N-type plug, 2 m Cable, Coaxial, RF output, 50 Ohm with N-type to N-type plug, 3 m Cable, Coaxial, RF output, 50 Ohm with N-type to N-type plug, 5 m Cable, Coaxial, RF output, 50 Ohm with N-type to N-type plug, 8 m Kit, Boom Mounting, Universal Kit, BUC Universal Feed Mount LNB, 10.95 to 11.70 GHz, 75 K, 60 dB gain, N-type output c/w flange kit, consisting of: LNB, 10.95 to 11.70 GHz, 75 K noise temperature, 60 dB gain, N-type output LNB, 11.70 to 12.20 GHz, 75 K, 60 dB gain, N-type output c/w flange kit, consisting of: LNB, 11.70 to 12.20 GHz, 75 K noise temperature, 60 dB gain, N-type output
Page 22 of 44
Table 6: Description
Options for Ku-Band BUC products (cont.) Ordering part number LNB-Ku-R3 78-12012 TRF-Ku 78-06016 0.6 Component part number Net mass (kg) 0.5
LNB, 12.25 to 12.75 GHz, 75 K, 60 dB gain, N-type output c/w flange kit, consisting of: LNB, 12.25 to 12.75 GHz, 75 K noise temperature, 60 dB gain, N-type output Transmit Reject Filter c/w flange kit, consisting of: Filter, Transmit Reject Pass: 10.70 to 12.75 GHz Reject: 13.75 to 14.50 GHz Kit, Flange, WR75, Universal Hand-held Controller 6560, consisting of: Hand-held Controller 6560 User Guide, Hand-held Controller/Remote Controller Remote Controller 6570 c/w 1 m cable for interface to 6550, consisting of: Remote Controller 6570 Cable, 6550 to 6570, 1 m User Guide, Hand-held Controller/Remote Controller Remote Controller 6570 c/w 50 m cable, consisting of: Remote Controller 6570 Cable, M&C, 6570 to BUC/7586, 50 m User Guide, Hand-held Controller/Remote Controller Remote Controller 6570 c/w 100 m cable, consisting of: Remote Controller 6570 Cable, M&C, 6570 to BUC/7586, 100 m User Guide, Hand-held Controller/Remote Controller
15-40174 6560 08-06121-001 15-44021-EN 6570-IU-1 08-06191-001 08-06183-001 15-44021-EN 6570-50 08-06191-001 08-06182-050 15-44021-EN 6570-100 08-06191-001 08-06182-100 15-44021-EN 21.2 11.2 1.7 1.3
Page 23 of 44
Table 6: Description
Options for Ku-Band BUC products (cont.) Ordering part number 6550 08-05965-001 15-44020-EN 67-9030X Component part number Net mass (kg) 3.4
6550 IF Interface Unit, consisting of: IF Interface Unit IF 6550 User Guide, L-Band 6550 IF Interface Unit Cable, 3-core, grey moulded, 2 m IEC-X (select one of the following, as appropriate): X = 1, Free (no plug) X = 5, Australian plug X = 6, UK plug X = 7, US plug X = 8, EU plug 6580B BUC Power Supply module c/w AC mains cable and 8" (200 mm) mounting kit, consisting of: Power Supply, BUC, 6580B Kit, Mounting, PSU/5586, 8" pole Cable, 3-core 24/0.20, No connectors, 10 m 6580B BUC Power Supply module c/w AC mains cable and 12" (300 mm) mounting kit, consisting of: Power Supply, BUC, 6580B Kit, Mounting, PSU/SSPA, 12" pole Cable, 3-core 24/0.20, No connectors, 10 m 6582 BUC Power Supply module c/w AC mains cable and 8" (200 mm) mounting kit, consisting of: Power Supply, BUC, 6582 Kit, Mounting, PSU/5586, 8" pole Cable, 3-core 24/0.20, No connectors, 10 m Cable, DC, Hi-Pwr, 16-11P to 16-11S (PSU/RBUC), 5 m
6580B-8
13.0
Page 24 of 44
Table 6: Description
Options for Ku-Band BUC products (cont.) Ordering part number 6582-12 Component part number Net mass (kg) 18
6582 BUC Power Supply module c/w AC mains cable and 12" (300 mm) mounting kit, consisting of: Power Supply, BUC, 6582 Kit, Mounting, PSU/SSPA, 12" pole Cable, 3-core 24/0.20, No connectors, 10 m Cable, DC, Hi-Pwr, 16-11P to 16-11S (PSU/RBUC), 5 m 7580 BUC Power Supply module c/w AC mains cable, consisting of: Power Supply, BUC, 7580 Kit, Boom Mounting, Universal Cable, 3-core 24/0.20, No connectors, 10 m Cable, DC, Hi-Pwr, 16-11P to 16-11S (PSU/RBUC), 1 m DuraComm IDU Power Supply module, consisting of: Power Supply, DuraComm IDU Cable, Coaxial, RF output, 50 Ohm with N-type to N-type plug, 1 m W/G, Flexible, WR75, RF Output, Ku-Band, 900 mm (36") Adaptor, WR75, W/G to N-type Adaptor, WR75, M4 metric to 6-32 UNC, consisting of: Adaptor, W/G, Ku-Band Kit, Flange, WR75, 6-32 UNC Hex Allen Key, 7/64AF (6-32 UNC)
08-06843-001 15-40147 08-05862-010 08-06848-005 7580-BM 08-06909-001 15-42072-000 08-05862-010 08-06848-001 15-42073-000 78-16044 08-05366-010 15-40163 78-01030 15-40183 05-07155 15-40182 75-31400-004 2.1 0.2 0.2 0.1 0.1 3.4 5.4
NOTE
If an ordering part number is not provided, please use the description or the component part number to order the option.
Page 25 of 44
Shipping
LBUC All LBUC standard packages ship in one carton (510 mm 335 mm 295 mm), and weigh 9.0 kg when packed. The shipment bulks out to 8.5 vol-kg gross. MBUC All MBUC standard packages ship in one carton (670 mm 345 mm 360 mm), and weigh 17.5 kg when packed. The shipment bulks out to 13.9 vol-kg gross. RBUC All RBUC 25 W and 40 W standard packages ship in one carton (510 mm 335 mm 295 mm), and weigh 9 kg when packed. The shipment bulks out to 8.5 vol-kg gross. Options and accessories The options and accessories listed above are shipped within the BUC cartons whenever possible. Please contact your Codan representative for further information. 6580B BUC Power Supply The 6580B BUC Power Supply is shipped in one carton (510 mm 335 mm 295 mm), and weighs 13.8 kg when packed. The shipment bulks out to 8.5 vol-kg gross. 6582 BUC Power Supply The 6582 BUC Power Supply is shipped in one carton (670 mm 345 mm 360 mm), and weighs 15.8 kg when packed. The shipment bulks out to 13.9 vol-kg gross. 7580 BUC Power Supply The 7580 BUC Power Supply is shipped in one carton (510 mm 330 mm 290 mm), and weighs 6.4 kg when packed. The shipment bulks out to 8.6 vol-kg gross.
Page 26 of 44
The 7586L Controller has been designed to provide the following options: BUC 1:1 redundancy switching (Tx Only) BUC and LNB 1:1 redundancy switching (Tx + Rx) internal 10 MHz reference signal for the above options 10 MHz reference redundancy with an external reference source
For critical applications in which protection of the receive path is also a requirement, the 7586L Tx and Rx option can be used to provide BUC and LNB switching (Tx and Rx). In this configuration, the 7586L operates in stream redundancy mode where a fault detected in either the BUC or LNB in one stream causes switchover to the other BUC and LNB pair. Figure 7: 7586L Controller, Tx Only
DC 1 48 V DC
DC 2 48 V DC
BUC 1 CONTROL
BUC 2 CONTROL
M&C 1 SERIAL
M&C 2 SERIAL
7586L Controller
STATUS AUTO MODE BUC 1 LNB 1 BUC 1 Tx IF O/P MODEM Tx IF I/P LAN REF 10 MHz BUC 2 LNB 2 BUC 2 Tx IF O/P
LAN
NOTE
Page 27 of 44
Figure 8:
7586L Controller, Tx + Rx
DC 1 48 V DC
DC 2 48 V DC
BUC 1 CONTROL
BUC 2 CONTROL
M&C 1 SERIAL
M&C 2 SERIAL
7586L Controller
STATUS AUTO MODE BUC 1 LNB 1 BUC 1 Tx IF O/P MODEM Tx IF I/P LAN REF 10 MHz BUC 2 LNB 2 BUC 2 Tx IF O/P LAN LNB 1 Rx IF I/P MODEM Rx IF O/P LNB 2 Rx IF I/P
The RF switching is provided by separate transmit and receive RF waveguide (W/G) switches. Figure 9: Transmit or receive RF W/G switch
Page 28 of 44
The 7586L Controller has the following standard features: splits transmit IF signal to drive both BUCs splits 10 MHz reference and FSK M&C signals to both BUCs switches 10 MHz reference and receive L-Band IF signals to/from both LNBs provides control of switching state from either BUC via BUC M&C compatible with all Codan BUCs (C-Band and Ku-Band) and all power levels provides independent access to RS232 of 7586L Controller functions via a PC provides independent access to BUCs for 6560 Hand-held Controller or RS232 M&C via a PC provides independent access to BUCs for the 6570 Remote Controller provides multi-drop bus RS422 access for remote control of BUCs via its serial ports NOTE There is no direct access to the M&C of the 7586L Controller via RS422.
The 7586L Controller has the following enhanced features: optional internal high-stability 10 MHz reference for BUCs fine frequency adjustment of internal 10 MHz reference to compensate for aging independent power level meter and alarm threshold settings for external 10 MHz reference for both BUCs and LNBs reference redundancy capability with automatic detection of internal and external 10 MHz reference and automatic switching if required internal 16 V DC supply to power LNBs DC power meter and alarm threshold settings for LNB supply to suit a wide range of LNBs self-resetting, short circuit overcurrent protection of internal DC suppliesno external fuses external LED monitoring of status and faults; display may be switched off intelligent dual-processor-based M&C providing a user command set and web server independent access to both BUCs or the 7586L Controller M&C via either M&C 1 SERIAL or M&C 2 SERIAL ports embedded web server providing user-friendly HTML pages for monitoring and controlling the 7586L Controller and both BUCs 10/100 BaseT LAN/Ethernet connectivity via the LAN interface Telnet and SNMP interfaces, with MIBs available from the Codan web site
Page 29 of 44
NOTE
The 7586L Controller converts the RS232 M&C of all BUCs, including LBUCs and MBUCs, and presents it as web pages and Telnet via its LAN interface. This enables indirect Ethernet access to LBUCs and MBUCs. Summary of Ku-Band BUC redundancy system solutions System configuration To BUC SWITCH CONTROL connector Software-configurable, INT or EXT reference with auto-switchover on failure Receive switch to LNB SWITCH CONTROL connector; transmit switch to BUC SWITCH CONTROL connector Software-configurable to Tx Only operation Software-configurable, INT or EXT reference with auto-switchover on failure Software-configurable to Tx Only operation Internal 10 MHz reference provides reference redundancy when combined with any external reference source. The 7586L can be set to: Auto, internal priority Auto, external priority On failure of the primary reference source, the 7586L automatically switches to the secondary reference source
Ku-Band Single WR75 switch No Rx control or IF connectors and cables Two WR75 switches
Tx + Rx + 10 MHz
Page 30 of 44
Types of systems
Use Table 8 to determine what options are available for you, depending on your requirements. Table 8: Types of redundancy systems Type of switch
Two BUCs with no LNBs (or a single LNB Single transmit RF W/G switch (WR75) connected directly to the modem) Two BUCS and two LNBs connected to the controller Separate transmit and receive RF W/G switches (both WR75)
Tx + Rx in Two BUCs with no LNBs (or a single LNB Single transmit RF W/G switch (WR75) Tx Only mode connected directly to the modem)
NOTE
The 10 MHz reference signal may be supplied to the BUCs and/or LNBs from a capable modem, or with the internal 10 MHz option in the 7586L. Output power and corresponding input power requirements (LBUC) 4W 8W 16 W 25 W
Table 9: Output power Output connectors Input powera Power supplied to BUC viaa
RF W/G (WR75) 48 V DC IF cable 6580B External DC connector 6580B or 7580 Modemb or 7586L 6580B or 7580 (48 V DC via auxiliary output connector)
Power supplied to BUC froma Power supplied to LNB from Power supplied to 7586L from
a. 7586L Controller does not multiplex modem DC power or external DC power to BUCs. DC power must be supplied directly to the BUC. b. For Tx Only redundancy systems.
Page 31 of 44
Table 10: Output power Output connectors Input power Power supplied to BUC via
Output power and corresponding input power requirements (MBUC) 16 W RF W/G (WR75) 94 V to 275 V AC External AC connector AC mains Modema or 7586L DuraComm SMPS ODU (78-16043) 25 W
Power supplied to BUC from Power supplied to LNB from Power supplied to 7586L from
a. For Tx Only redundancy systems.
Table 11: Output power Output connectors Input power Power supplied to BUC via
Output power and corresponding input power requirements (RBUC) 25 W RF W/G (WR75) 48 V DC External DC connector 7580 Modema or 7586L 7580 (48 V DC via auxiliary output connector) 40 W
Power supplied to BUC from Power supplied to LNB from Power supplied to 7586L from
a. For Tx Only redundancy systems.
Page 32 of 44
AC 48 V DC controller supply DC block and splitter modem IF, 10 MHz Ref, FSK (no DC)
BUCs require 10 MHz reference from modems or 7586 reference option termination BUC 2
Tx W/G switch
to transmit port
AC switch control
Page 33 of 44
Figure 11: Layout of BUC redundancy switching systemTx and Rx, AC-powered
AC 48 V DC controller supply DC block and splitter modem IF, 10 MHz Ref, FSK (no DC)
BUCs require 10 MHz reference from modems or 7586 reference option termination BUC 2
Tx W/G switch
to transmit port
AC switch control
15 V DC modem LNB 1 IF, 10 MHz Ref, 15 V DC DC block and IF switch LNBs require 10 MHz reference from modems or 7586 reference option LNB 2 from receive port
Rx W/G switch
Page 34 of 44
48 V DC
AUX
6580B/7580 MAIN
AC
controller supply DC 1
48 V DC BUC 1
DC block and splitter modem IF, 10 MHz Ref, FSK (no DC)
BUCs require 10 MHz reference from modems or 7586 reference option termination
Tx W/G switch
to transmit port
48 V DC
AUX
Page 35 of 44
Figure 13: Layout of BUC redundancy switching systemTx and Rx, DC-powered
48 V DC
AUX
6580B/7580 MAIN
AC
controller supply DC 1
48 V DC BUC 1
DC block and splitter modem IF, 10 MHz Ref, FSK (no DC)
BUCs require 10 MHz reference from modems or 7586 reference option termination
Tx W/G switch
to transmit port
48 V DC
AUX
15 V DC modem LNB 1 IF, 10 MHz Ref, 15 V DC DC block and IF switch LNBs require 10 MHz reference from modems or 7586 reference option LNB 2 from receive port
Rx W/G switch
Page 36 of 44
Figure 14: Layout of BUC redundancy switching systemTx Only, DC-powered (DuraComm IDU Power Supply module)
Outdoor
MAIN AUX
IF OUT not used IF IN
48 V DC
AC modem
BUCs require 10 MHz reference from modems or 7586 reference option termination
Tx W/G switch
to transmit port
BUC 2
IF OUT IF IN
not used
controller supply DC 2
AUX MAIN 48 V DC
Page 37 of 44
Figure 15: Layout of BUC redundancy switching systemTx and Rx, DC-powered (DuraComm IDU Power Supply module)
Outdoor
MAIN AUX
IF OUT not used IF IN
AC modem
BUCs require 10 MHz reference from modems or 7586 reference option termination
Tx W/G switch
to transmit port
BUC 2
15 V DC modem LNB 1 IF, 10 MHz Ref, 15 V DC DC block and IF switch LNBs require 10 MHz reference from modems or 7586 reference option LNB 2
IF OUT IF IN not used
Rx W/G switch
controller supply DC 2 48 V DC 48 V DC
AUX MAIN
Page 38 of 44
For details on... Ku-Band redundancy switching systems (Tx Only) Ku-Band redundancy switching systems (Tx and Rx) Options for Ku-Band redundancy switching systems
Ku-Band redundancy switching systems (Tx Only) Ordering part number 7586L-KU/W-L1-TO 08-06997-001 15-42088-000 7586L-KU/W-L1-TO/REF 08-06997-002 15-42088-000 7586L-KU/W-M1-TO 08-06997-001 15-42090-000 18.3 18.3 Net mass (kg) 18.3
7586L Controller, LBUC, Ku-Band, W/G, Tx Only, consisting of: 7586L Controller Kit, Redundancy System, LBUC, Ku-Band, W/G, Tx Only 7586L Controller, LBUC, Ku-Band, W/G, Tx Only, 10 MHz Ref, consisting of: 7586L Controller with 10 MHz option Kit, Redundancy System, LBUC, Ku-Band, W/G, Tx Only 7586L Controller, MBUC M1, Ku-Band, W/G, Tx Only, consisting of: 7586L Controller Kit, Redundancy System, MBUC M1, Ku-Band, W/G, Tx Only
Page 39 of 44
Ku-Band redundancy switching systems (Tx Only) (cont.) Ordering part number 7586L-KU/W-M1-TO/REF 08-06997-002 15-42090-000 7586L-KU/W-R1-TO 08-06997-001 15-42092-000 7586L-KU/W-R1-TO/REF 08-06997-002 15-42092-000 18.3 18.3 Net mass (kg) 18.3
7586L Controller, MBUC M1, Ku-Band, W/G, Tx Only, 10 MHz Ref, consisting of: 7586L Controller with 10 MHz option Kit, Redundancy System, MBUC M1, Ku-Band, W/G, Tx Only 7586L Controller, RBUC R1, Ku-Band, W/G, DC, Tx Only, consisting of: 7586L Controller Kit, Redundancy System, RBUC R1, Ku-Band, W/G, DC, Tx Only 7586L Controller, RBUC R1, Ku-Band, W/G, DC, Tx Only, 10 MHz Ref, consisting of: 7586L Controller with 10 MHz option Kit, Redundancy System, RBUC R1, Ku-Band, W/G, DC, Tx Only
Ku-Band redundancy switching systems (Tx and Rx) Ordering part number 7586L-KU/W-L1-TR 08-06997-003 15-42089-000 7586L-KU/W-L1-TR/REF 08-06997-004 15-42089-000 18.3 Net mass (kg) 18.3
7586L Controller, LBUC, Ku-Band, W/G, Tx + Rx, consisting of: 7586L Controller Kit, Redundancy System, LBUC, Ku-Band, W/G, Tx + Rx 7586L Controller, LBUC, Ku-Band, W/G, Tx + Rx, 10 MHz Ref, consisting of: 7586L Controller with 10 MHz option Kit, Redundancy System, LBUC, Ku-Band, W/G, Tx + Rx
Page 40 of 44
Ku-Band redundancy switching systems (Tx and Rx) (cont.) Ordering part number 7586L-KU/W-M1-TR 08-06997-003 15-42091-000 7586L-KU/W-M1-TR/REF 08-06997-004 15-42091-000 7586L-KU/W-R1-TR 08-06997-003 15-42093-000 7586L-KU/W-R1-TR/REF 08-06997-004 15-42093-000 18.3 18.3 18.3 Net mass (kg) 18.3
7586L Controller, MBUC M1, Ku-Band, W/G, Tx + Rx, consisting of: 7586L Controller Kit, Redundancy System, MBUC M1, Ku-Band, W/G, Tx + Rx 7586L Controller, MBUC M1, Ku-Band, W/G, Tx + Rx, 10 MHz Ref, consisting of: 7586L Controller with 10 MHz option Kit, Redundancy System, MBUC M1, Ku-Band, W/G, Tx + Rx 7586L Controller, RBUC R1, Ku-Band, W/G, DC, Tx + Rx, consisting of: 7586L Controller Kit, Redundancy System, RBUC R1, Ku-Band, W/G, DC, Tx + Rx 7586L Controller, RBUC R1, Ku-Band, W/G, DC, Tx + Rx, 10 MHz Ref, consisting of: 7586L Controller with 10 MHz option Kit, Redundancy System, RBUC R1, Ku-Band, W/G, DC, Tx + Rx
Options for Ku-Band redundancy switching systems Ordering part number Component part number 08-05972-002 08-06956-002 08-06956-006 08-06956-050 Net mass (kg) 0.2 0.3 0.5 2.7
Cable, M&C, Serial, MS14P to DB9 (BUC/Controller), 2 m Cable, M&C, LAN, RBUC/Controller (Indoor/Outdoor), 2 m Cable, M&C, LAN, RBUC/Controller (Indoor/Outdoor), 6 m Cable, M&C, LAN, RBUC/Controller (Indoor/Outdoor), 50 m
Page 41 of 44
Options for Ku-Band redundancy switching systems (cont.) Ordering part number Component part number 08-06956-100 08-06448-005 08-06974-001 08-06974-007 6570-50 08-06191-001 08-06182-050 15-44021-EN 6570-100 08-06191-001 08-06182-100 15-44021-EN 21.2 Net mass (kg) 5.2 0.5 0.5 0.7 11.2
Cable, M&C, LAN, RBUC/Controller (Indoor/Outdoor), 100 m Cable, DC, Lo-Pwr, Mini 8-2S to Free end (LBUC/Accessories), 5 m Cable, DC, Lo-Pwr, Mini 8-2P to 8-2S (PSU AUX/Accessories), 1 m Cable, DC, Lo-Pwr, Mini 8-2P to 8-2S (PSU AUX/Accessories), 7 m Remote Controller 6570 c/w 50 m cable, consisting of: Remote Controller 6570 Cable, M&C, 6570 to BUC/7586, 50 m User Guide, Hand-held Controller/Remote Controller Remote Controller 6570 c/w 100 m cable, consisting of: Remote Controller 6570 Cable, M&C, 6570 to BUC/7586, 100 m User Guide, Hand-held Controller/Remote Controller
NOTE
Cable 08-06098-xxx is not used between the 6570 and the 7586L.
Shipping
LBUC, MBUC and RBUC redundancy systems All BUC redundancy systems ship in one carton (670 mm 330 mm 330 mm), and weigh either 22 kg (Tx only) or 23 kg (Tx and Rx) when packed. This shipment bulks out to 16 vol-kg gross.
Page 42 of 44
Interconnection drawings
Table 15: Title Redundancy System, LBUC, Ku-Band, W/G, Tx Only Redundancy System, LBUC, Ku-Band, W/G, Tx + Rx Redundancy System, MBUC M1, Ku-Band, W/G, Tx Only Redundancy System, MBUC M1, Ku-Band, W/G, Tx + Rx Redundancy System, RBUC, Ku-Band, W/G, DC, Tx Only Redundancy System, RBUC, Ku-Band, W/G, DC, Tx + Rx Interconnection drawings Codan part number 03-01243 (sheet 1) 03-01243 (sheet 2) 03-01246 (sheet 1) 03-01246 (sheet 2) 03-01247 (sheet 1) 03-01247 (sheet 2)
Page 43 of 44
Page 44 of 44
03-01243 (sheet 1)
03-01243 (sheet 2)
03-01246 (sheet 1)
03-01246 (sheet 2)
03-01247 (sheet 1)
03-01247 (sheet 2)
Index
Numerics
10 MHz reference 4, 9 48 V DC 9 6550 IF Interface Unit 6, 10 configuration 12 with 6580B BUC Power Supply 12 6560 interface 17 6570 interface 16 6580B BUC Power Supply 6 configuration 13 6582 BUC Power Supply 7 configuration 13 7580 BUC Power Supply 7 configuration 13 7586L Controller 27
H
HTTP web interface 16
I
IF Interface Unit 6 interface additional for 7700/7900 series 16 HTTP web 16 LAN 16 SNMP 16 Telnet 16 standard 15 6560 17 6570 16 FSK 15 RS232 15 RS422/485 15
B
BUC products Ku-Band 18 options 21 redundancy solutions 27 standard accessories Ku-Band 21
K
Ku-Band BUC products 18 standard accessories 21 Ku-Band redundancy switching systems Tx and Rx 40 Tx Only 39
C
configuration 6550 IF Interface Unit 12 with 6580B BUC Power Supply 12 6580B BUC Power Supply 13 6582 BUC Power Supply 13 7580 BUC Power Supply 13 DuraComm IDU Power Supply 14
L
LAN interface 16
M
M&C 15
D
DC power 4, 9, 10 DuraComm IDU Power Supply 7 configuration 14 SMPS ODU 7, 32
N
no 10 MHz reference from modem 9 no DC power from modem 9
O
optical fibre interfacility link 10
F
FSK interface 15 FSK M&C 4, 10
P
power supply 6580B 6 6582 7 7580 7 DuraComm IDU 7
Index-1
Index
R
redundancy switching of LNB 27 RS232 interface 15 RS422/485 interface 15
S
shipping 42 shipping details 26 SNMP interface 16 summary of BUC solutions 8
T
Telnet interface 16
Index-2