Professional Documents
Culture Documents
High-Density Road & Rut Scanning: Gocator
High-Density Road & Rut Scanning: Gocator
High-Density Road & Rut Scanning: Gocator
2075
MEASURE LANES UP TO 4.2m WIDE OPERATE RELIABLY DAY AND NIGHT SETUP & CONTROL VIA WEB BROWSER or SDK LIGHT WEIGHT (<1.5kg per sensor)
BUILT ON ROLINE SUCCESS: Built on the success of the industry-standard RoLine sensor technology. Integrate into existing systems with full profile output over Ethernet. HIGH SPEED, ACCURATE AND WIDE SCAN WIDTH: Scan up to 500Hz (~60mm interval at 110km/h) with 5000 points across 4.2m scan width. VEHICLE CHOICES AND SAFETY: Low mounting height (< 1m) and vertical projection minimizes laser safety hazards. INTENSITY OUTPUT: An intensity output is provided at each point for aligning transverse profiles relative to lane markers. SCALABLE AND COST EFFECTIVE: Scalable to cover different lane widths. Network up to 24 sensors using LMI master hubs. Masters take care of power, distribution, laser safety interlock and microsecond synchronization. COMPACT & LIGHT WEIGHT: A full 8 sensor system can mount onto a 2.4m wide vehicle and weights under 12kg.
Gocator 2075
DATASHEET_Gocator_2075_1.3
2075
sensor specifications Model Scan Rate (Hz)
(CD) 650 mm
Gocator 2075-3B-N-11 500Hz to 5kHz 352 mm - 1060 mm 625 0.73 mm - 1.63 mm 0.02% of MR 0.09 mm - 0.70 mm 650 mm 1350 mm 3B (< 500 mW), 808 nm (Near Infrared) Gigabit Ethernet Differential Encoder, Laser Safety Enable, Trigger 2x Digital Output, 1x RS-485 Serial, 1x Analog Output (4-20 mA) +48 VDC (20 Watts); Ripple +/- 10% 65 x 75 x 272 mm 1.5kg Gasketed aluminium enclosure, IP67 0 to 50 C -30 to 70 C
Linearity (Z) Resolution (Z) Clearance Distance (CD) Measurement Range (MR) Laser Class
(MR) 1350 mm
EXAMPLE CONFIGURATION (8 Gocator system 4.2m FOV) Scan Rate (Hz) Field of View (FOV) Points Per Profile (8 sensors)
8 GOCATOR SYSTEM 4.2m FOV
500Hz 4.2 m for 8 sensors, 754 mm per sensor Up to 5000 0.67 mm 1.18 mm 0.16 mm 0.44mm 625 mm
NOTE: Specifications are based on preliminary data, final specifications may vary
272 mm
61.5 mm
IEC 60825-1:2007
This product is designated for use solely as a component and as such it does not fully comply with the standards relating to laser products specified in U.S. FDA CFR Title 21 part 1040 and IEC 60825-1
75 mm
65 mm
Contact LMI Technologies or an authorized Gocator distributor for more information on how Gocator can improve your competitive edge. www.lmi3D.com
2012 LMI Technologies Inc. All rights reserved. Information contained in this brochure is subject to change without notice.