Professional Documents
Culture Documents
Hardware Exam
Hardware Exam
1. Which of the following connector types has four connection points, or four
wires?
A. PS/2
B. USB
C. DB-9
D. BNC
2. 2. Which of the following is true about a DIMM? (Choose all that apply)
A. Hard disk
B. The second network adapter
C. The Workstation service
D. The registry
5. You have just put a new PCI card into a system. It is conflicting with an older
EISA card that is in the system. Both adapters appear to be trying to use
IRQ11. What can you do to solve this problem?
A. Use winmsd.exe to reserve IRQ10 for devices that are not Plug and Play.
B. Use winmsd.exe to reserve IRQ11 for devices that are not Plug and Play.
C. Reboot the computer and edit the BIOS settings for the computer. Reserve
IRQ11 for devices that are not Plug and Play.
D. Reboot the computer and edit the BIOS settings for the computer. Reserve
IRQ5 for devices that are not Plug and Play.
MIIT Page 1
6. 6. The Picture below shows a generic motherboard layout. Identify A, B, C, D,
E, F
A. TRUE
B. FALSE
MIIT Page 2
9. Write correct beep Definitions for beep sounds code below?
1 beep-
2 beeps-
3 beeps-
4 beeps-
5 beeps-Processor Failure
6 beeps-
Continuous beeping-
DRAM refresh failure ,Memory Parity circuit failure , System timer failure, Base 64K
RAM failure, Keyboard controller gate A20 error Processor failure, Display memory
R/W test failure, A failure has been detected in memory above 64K, Failure in the
video system, A problem with the memory or video.
10.When you power on a computer what is the first to final step of process runs
and loads until you logged on the computer ?write step by step
11.How would you find out if an external modem has been detected and
installed correctly in Windows 98/98SE simply? Write the method?
12.NICs are used to connect workstations to servers or workstations to
workstations.
A. True
B. False
13.USB stands for
A. 5
B. 7
C. 9
MIIT Page 3
D. 14
E. 15
17.What is partitioning?
b. What are partition types?
MIIT Page 4