Professional Documents
Culture Documents
Can
Can
POPRAVCI SHEME
Zagreb, 11.2005.
CAN SUSTAVI
(Controller Area Network)
FORMAT PORUKE
Start of frame - poetak Arbitration field - prioritet Control field - broj byta u data field-u Data field - informacija CRC field - problemi
Data Frame
BM34 Kompjuter opsluivanja motora BSI Kompjuter za vezu CV00 Kompjuter prekidaa kod volana 0004 Instrument ploa 0049 Ekran vienamjenski 1320 Kompjuter motora 1630 Kompjuter automatskog mjenjaa 4350 Kompjuter aditiva nafti 6000 Kompjuter vrata 6560 Kompjuter zranog jastuka 6800 Kompjuter otvora na krovu 7020 Kompjuter ABS-a
7500 Kompjuter pomoi pri parkiranju 7715 Kompjuter ovjesa 8080 Kompjuter klime
CAN 250kbit/s
VAN KOM. 125 kbit/s
KONEKTORI
Vrlo vani elementi, trebaju osigurati dobar spoj. Pozlaeni kontakti. Vrlo slabe struje i niski naponi.
10
11
Part Information
Standard kit, Optional item and Supplement item
Part Name Illustrations Remarks
12
Part Name
Illustrations
Remarks
13
14
Terminal Remover Tool Flat Tip Type Removal of single locking type male/female terminal. : Removal of front or rear retainer (holder, stopper) : Ensure that the tip of the tool is inserted into the gap between the elastic arm of key and terminal. Double Tip Type For JPT type terminal connector. Tips : After removing the terminal, check for any deformation. If there is, replace it with a new terminal.
15
Check point before using Select the shaft with the male terminal that is the correct mate for the female terminal being checked.
Measurement Insert the shaft into the female terminal being checked.(as shown in photograph) Inspection Results : If the tension of female terminal is proper, No need to replace the connector. : If the tension of female terminal is not proper, Replace the connector.
16
The shrunk form of the shrink tube should be securely wrapped around the solder connector.
17
18
19
20
21
22
23
24
25
26
27
Konektori
28
29
30
E/R
31
32
33
34