Professional Documents
Culture Documents
Point Synchronization: To Edit Points Using Autocad Land Desktop Commands
Point Synchronization: To Edit Points Using Autocad Land Desktop Commands
Point Synchronization: To Edit Points Using Autocad Land Desktop Commands
1 With points in the drawing (or in the point database only), Editing Points choose a point editing command, such as Move, from the Points Edit Points menu. 2 Select the points you want to move. 3 Select a base point and a point of displacement to move the point(s). Move Objects
ERASE Command
2 After you edit the points, choose Modify Project from the Updating the Project Point Points Check Points menu to update the project with Database with Drawing Point the changes that you made to the points in the drawing. Information 3 In the Modify Project Database Points from Drawing dialog box, select the options to modify the project, and then click OK.
Point Synchronization
In some situations the project points may not match the drawing points. For example, the project database does not match the drawing points when you do any of the following:
Use commands such as ERASE or COPY to modify the points. Edit points in the drawing and database, and then quit the drawing without saving it. Restore an old version of a drawing. Edit points in one drawing and then open another drawing that contains the same points.
Point Synchronization
49
To change the drawing so that it matches the project point database, or to change project points to match the drawing, you can use the Check Points commands on the Points menu. You can use these commands to
Add project points to a drawing, or remove them from a drawing, so the drawing matches the project. Add points in the drawing to the project, or remove points from the project that are not in the drawing, so the project matches the drawing.
For example, if more than one person is working on the project and adding points to the point database, then the points in the drawing may not match the project points. You can update the drawing with the project points by using the Modify Drawing command from the Points Check Points menu. The following illustration shows the options available when you use this command:
50
Chapter 3