Professional Documents
Culture Documents
You Chang Cataloug
You Chang Cataloug
Product ID
Width (mm)
Weight (g/m2)
Woven type
YC-3K 200gsm
YC-3K 240gsm YC-3K PVC 240gsm CB131 Carbon & Basalt hybrid YC-3K 380gsm YC-12K 400gsm
1,000
1,000 1,000 1,000 1,000 1,000
12.5
15 15 12.5 25 6
13.5
15 15 13.5 25 6
0.25
0.26 0.30 0.25 0.34 0.43
200
240 380 303 380 400
PLAIN TWILL PLAIN TWILL PVC Black PLAIN 8H SATIN PLAIN TWILL
Width=> 1,000~1,500mm Weight=> 200gsm~400gsm General prepreg type=> Epoxy & Phenol
YOU CHANG
Face Film
Solvent Adhesive
Release Liner
Size
0.09mm
30
140g
127cm X 50m
YOU CHANG
General Modulus Prepreg(24Ton) without Scrim -Standard Resin ContentProduct ID CP 050NS CP 075NS CP 100NS CP 125NS CF Wt (g/m ) 50 75 100 125 Resin Wt (g/m ) 37 46 54 62 ResinContent (%) 40 38 35 33 Total Wt(g/m ) 92 121 154 187 Thickness (mm) 0.061 0.080 0.101 0.121
CP 150NS
CP 175NS CP 200NS CP 250NS
150
175 200 250
74
86 99 123
33
33 33 33
224
261 299 373
0.145
0.169 0.194 0.241
High Modulus Prepreg(46Ton) with Scrim -Low Resin contentCF Wt (g/m ) 55 69 92 Resin Wt (g/m ) 37 36 39 Resin Content (%) 40 34 30 Scrim Wt (g/m ) 35 35 35 Total Wt(g/m ) 127 140 166 Thickness (mm) 0.091 0.098 0.114
Product ID
46H 1163
46H 1393 46H 1603 46H 1843
116
139 160 184
50
60 69 79
30
30 30 30
35
35 35 35
201
234 264 298
0.136
0.157 0.176 0.198
YOU CHANG
Product ID
Width(mm)
Thickness (mm)
Weight (g/m2)
Woven type
Remarks
60 64 64
25 108 208
YC-224
YC-7781 YC-1522 AN2 YC-2110 N2
1,020
1,020 24,2527, 30 24,2527, 30
50
57 24 18
26
54 22 17
0.24
0.23 0.15 0.21
302
300 122 (4oz) 187 (6oz)
YOU CHANG
mechanical load, chemical, welding defender, compensators, oil and corrosive of resistant insulation mats, heat production quilt
good resistance to abrasion and cuts, waterproof, allergen resistant welding protection heavy duty insulation and seal, Widely used in exhausting, taking a breath, ventilation, smoke and dust, waste gas of the steel, electricity, metallurgy, chemical industry the systematic pipeline compensation of dealing with etc.. heavy duty insulation and seal welding protection, covering fabric welding protection welding protection
Vermiculite coating
750
Steel wire reinforcing fiberglass fabric PVC coated fiberglass fabric Acrylic coated fiberglass fabric Neoprene coated fiberglass fabric Level off veins fiberglass fabric
increase tensile strength good resistance to abrasion, oil, and cuts, waterproof good resistance to abrasion and cuts. allergen resistant and antiadhesive surface good resistance to abrasionallergen resistant
550
550
550
550
good resistance to abrasion welding protection, heat preservation and cuts waterproof, gas defender and increase resistance to welding protection, waterproof material, abrasion, high temperature fireproof material absorb increase resistance to Non-metal expanse joints, heat abrasion, oil, acid and high preservation material temperature increase resistance to Non-metal expanse joints, heat abrasion and high preservation material temperature increase resistance to Non-metal expanse joints, heat abrasion and high preservation material temperature
YOU CHANG
Product ID
Width (mm)
Thicknes s (mm)
Weight (g/m2)
Woven type
YC-118
YC-318 YC-318 black PVC coating YC-533 silver & black coating
35
18 18
30
18 18
0.18
0.18 0.48
176
193 580
PLAIN
PLAIN PLAIN
1,020
20
22
0.32
330
TWILL
1,020
1,020 1,020 1,020 1,020
20
35 15 15 44
22
26 13 13 34
0.56
0.58 0.25 0.25 0.18
624
510 300 309 210
TWILL
TWILL PLAIN PLAIN PLAIN
YOU CHANG
Mesh size
YOU CHANG
Reinforcement material
CARBON WRAP SYSTEM
Fiber Type
Style
Fiber Type
Style
Kevlar
2,880
100 415
Woven UD Woven UD
APPLICATION
YOU CHANG
Multi-axial Fabric
PRODUCT FEATURES 1.No binder used; 2.Fast wet-out; 3.High strength in a specific direction; 4.Increase the properties of laminated FRP in terms of ultimate tensile strength, delaminating resistance under stress and flexural strength; 5.Reduce the weight of FRP; 6.Make FRP surface smoother; 7.Simplify the operation of Hand Lay-up and improve productivity.
YOU CHANG
3-4Min
50mm 100,250,300,450,600,900 30,60,1250,1050,1020,3200
APPLICATION
YOU CHANG
Chopped Strand
1. E-Glass Chopped Strands for BMC are widely used in transportation, construction, electronics,chemical industry. 2. E-Glass Chopped Strands for Thermoplastics are mainly used in injection and compression molding processes
YOU CHANG
Ballistic Fabric
A. Kevlar/Twaron Ballistic Fabric
Kevlar / Twaron Ballistic Fabric for making bulletproof jackets, helmets, plates, etc.: Specification: 1.20 by 2.42M; 1.60 by 3.20M; or length 100M+ Area Density: 225g/m2 Ballistic Layers for NIJ IIIA: 24 Mini order: 100 sq.m; sample is available and charged. Capacity: 10 kilo sq.m monthly Kevlar / aramid ballistic fabric is softer and more comfortable than UHMW-PE, but it is weaker on UV resistant, low moisture sensibility and not waterproof. Guarantee Period: the material are in 5 years warranty. Note: the material can be preserved under temperature 300 centigrade
YOU CHANG
Silica fabric
High Silica Products - 1200 : YOUCHANG Silica cloth is a high performance textile fabric that has 96% SiO2, flexible fabric designed for use where severe temperature conditions exist. It used for thermal insulating and heat protection. It will not burn, rot or deteriorate and resist most acids. It will keep good state when it works at 1100 for a long time. It works at 1400 more than 15 minutes and works at 1700 more than 15 seconds. Applications Used for heat preservation and thermal insulating. Welding/cutting, molten metal splash protection. Heat and flame shielding, stress relief. Hose and cable protection and emergency fire blankets Main Specifications
Warp Model Weave Per cm 0300P01 0300S02 0300S04 Plain 8H Stain 8H Stain 18 18 18 Per cm 13 13 13 Fill Tensile Strength min Fill 1200 1500 4400 Warp 1000 1200 3400 Weight g/m2 300 600 1200 Thickness mm 0.28 0.6 1.4 Width m 0.8-0.82 0.914 0.914
YOU CHANG
Main Specifications
Application Density (g/m) 20 Filament Winding 30 50 30 Hand lay 40 50 <0.2 Moisture Content(%) Binder Content(%) 7 6 6 7 6 6 Wetting Tensile Time(%) Strength(N/5cm) <8 <10 <16 <10 <15 <20 20 25 40 20 25 30
YOU CHANG
Direct Roving
Direct Roving for Filament Winding, Pultrusion, Weaving : Direct Roving is an E-glass roving produced by directly winding a certain number of individual fibers from the bushing without twist. It is coated with a silane-based size and is designed for reinforcing unsaturated polyester, epoxy, vinylester and phenolic resins. It is specially used to produce GRP FRP pipes, pressure vessels, gratings and profiles and, when converted into woven rovings, boats and chemical storage tanks with filament winding, pultrusion and weaving process. Product Features : Rapid and complete wet out, Good processing characteristics Low resin demand during processing High composite mechanical properties Storage : This Product should be stored in dry, cool, clean and rain-proof area. Recommended temperature range of storage is between 15-35 and relative humidity between 35%-65%. Main Specifications
Linear Size Density(Tex) Content(%) ISO1887 240,300,600, 1200,2400, 4400,4800 Moisture Content(%) ISO3344 Stiffness Net Weight (mm) (kgs) ISO3341 15.6 17, 22 Weaving Filament Winding Pultrusion Application
0.150.15
0.10
0.40
YOU CHANG
C glass fabric
Fiberglass Plain Weaving Fabric mainly means the fabric woven by fiberglass yarn in plain weaving. Applications It is mainly used in vessel, building, electricity insulation(designated as Egrade Fabric) and the production of various composite materials and reinforced materials. It is widely used for manufacturing FRP sheets, pipe, rods, car body, boat hull, fan blade and Varieties of profiles etc. Product Features : Plain veave, even thickness and low fuzz; High strength in both warp and weft direction; Incombustibility, corrosion resistance and heat resistance;
Main Specifications
Model CW100H CW105 CW140 CW180A CW180D
Type of
Glass C C C C C
Area Weight
(GSM) 90 105 131 145 145
CW260
EW100B EW140B EW200
C
E E E
12
20 16 8
8
20 12 7
260
100 140 200
100
100 100 100
Plain
Plain Plain Plain
YOU CHANG
S glass fabric
HS2 and HS4 - are high strength glass fibers made from magnesium alumina silicate system which meets the needs of military and other applications where high strength and high performance is required. S-Glass is generally used for polymer matrix composites that require improved mechanical properties compared to E-glass based composites. This is often the case when the material is operated under more extreme conditions. S-Glass will has the same working qualities as a standard E-glass, however you will gain an approximate 25-30% increase in breaking strength. Used in applications where the most possible strength is required while keeping weight to a minimum. Applications Aerospace, marine and arms industries due to its high tensile strength and higher modulus of elasticity when compared to e-glass. Advantageous 30 to 40% better tensile strength 16 to 20% higher modulus of elasticity 100 to 150 degrees celsius better temperature endurance 10 fold higher fatigue resistance Excellent impact resistance because of the high elongation to breakage High ageing and corrosion resistance Quick resin wet-out properties Weight saving at the same performance
YOU CHANG
Style No.
SW140C-90a
SW180D-90a SW210B-92a SW210A1-92a SW220B-90a SW220C-90a SW220D-90a
SC8-12 x 2 x 2
SC8-12 x 2 x 2 SC8-12 x 2 x 3 SC8-24 x 1 x 3 SC8-12 x 2 x 3 SC8-12 x 2 x 3 SC8-12 x 2 x 3
14
18 16 16 18 18 18
14
18 12 12 14 14 14
900
1200 1600 1600 1900 2000 2000
900
1200 1350 1350 1600 1600 1600
140
180 210 210 240 240 240
4HS
5HS 2/2 Twill Plain 2/2 Twill 4HS 5HS
SW220B-90b
SW220C-90b SW240F-92a SW280F1-90a
SC8-12 x 2 x 3
SC8-12 x 2 x 3 SC8-12 x 2 x 3 SC8-24 x 1 x 3
18
18 20 20
14
14 14 18
1900
1900 2700 2000
1600
1600 1500 1700
240
240 260 280
2/2 Twill
4HS 8HS 8HS