Professional Documents
Culture Documents
Prodotti
Prodotti
Prodotti
As the pioneer of translucent materials, 3form understands how light inspires, captivates and transforms design. Introducing 3form Lightline designed specifically to work with Chroma panels. Lightline brings a new dimension to lighting translucent materials. Lightline is fully integrated light solution with hidden technology that deliverers over 50.000 hours of fully tested lighting - Fit and forget 3form Lightline.
GLOW Single sided product with Renewable Matte front finish and Polished back finish Evenly lit Chroma panel Up to 600mm width single sided lighting, above 600mm up to 1200mm double sided lighting Diffuse colorless panel
ACCENT Double sided product with Renewable Matte front finish and Matte back finish Architectural accent lighting, enhanced color and form Lightline set in 1 or 2 edges of a Chroma panel for subtle glow or greater intensity Chroma can be produced with brilliant colors that can be layered (up to 3 colors)
For more information please visit www.3form.eu or email info@3form.eu or call +31 (0) 88 336 76 00 15-07-11 3form BV, All rights reserved
For more information please visit www.3form.eu or email info@3form.eu or call +31 (0) 88 336 76 00 15-07-11 3form BV, All rights reserved
Shelving systems
For more information please visit www.3form.eu or email info@3form.eu or call +31 (0) 88 336 76 00 15-07-11 3form BV, All rights reserved
Gauge tolerances are an inherent part of working with resin. Given the unique manufacturing process for 3form Chroma, a given gauge is subject to a +/- 10% thickness tolerance. Thickness tolerance readings are based on measurements along both long edges of each panel. PANEL SIZE TABLE STANDARD CHROMA PANELS: Gauge* 25.4 mm (1") 50.8 mm (2")
Maximum allowance 27.9 mm (1.100") 55.9 mm (2.200") Maximum allowance 31.1 mm (1.225") 59.1 mm (2.325")
PANELS WITH RENEWABLE MATT BACK FINISH: Gauge* Minimum allowance 28.5 mm (1-1/8") 24.5 mm (0.965") 53.9 mm (2-1/8") 47.4 mm (1.865")
*Chroma renewable matte back finish materials add 1.5 mm (1/16) to overall thickness.
FLATNESS TOLERANCE Chroma panels shall not have distortion in the form of a wrinkle, twist or scallop along the perimeter of the sheet. Additionally, Chroma panels shall not have distortion in the form of a compound curve or S shape. Overall warp in the form of a simple curve (bow warp) extending across the sheet is permitted to a maximum of 6.3 mm (1/4") for each 1.2 m (48"), or fraction thereof. Panel is to be measured when laying horizontally under its own weight on a flat continuous surface.
For more information please visit www.3form.eu or email info@3form.eu or call +31 (0) 88 336 76 00 15-07-11 3form BV, All rights reserved
FLAMMABILITY & SMOKE TEST RESULTS Chroma panels have been independently tested according the test methodes EN 13501-1:2007+A1:2009. Chroma has an "E" fire classification. REFINISHING One of the unique benefits of 3form Chroma is its ability to be refinished. If 3form Chroma needs to be refinished for any reason, the panels may be renewed by sanding. Begin by dry sanding with a course grit paper (100 or 180 grit) to remove blemishes/scratches. Continue sanding with gradually finer grit papers until the surface is smooth and level and the blemish/scratches are removed. HEAT FORMING/ COLD BENDING Lightline is designed for combining with flat edges. Simple curved panels are possible, but the lighting effect would be modified. FURTHER SPECIFICATIONS AND LIMITATIONS For more information on technical specification ( such us physical properties, chemical resistence, fabrication) see Chroma Technical Data Sheet.
Lightline modules
TECHNICAL SPECIFICATION Illsutration 1 - Lightline module
CCT: 4000 Kelvin Color rendering: Ra > 80 Input voltage 24 Volt DC 1,2 V Unit contains high voltages Class 2 luminaire
Lightline consists of an aluminium extrusion, in which a T1 cold cathode fluorescent lamp is mounted together with a ballast. The lamp, electronics and housing are balanced in the factory and are not user modifiable. Lightline is a technical product and should be treated as a class 2 lighting luminaire. Electrical supply requires SELV approval. Lightline units comply with IEC 60529, protection class IP40. Any works on or associated with Lightline should only be carried out by suitably qualified personnel. Lightline should be assembled and used in accordance with local national regulations. Cables cannot be lead through the Lightline modules. There are no user serviceable parts; modules, cables or other parts may not be modified, lamps cannot be replaced. Lightline is only suitable for interior applications and can be installed in normal flammable materials. TEMPERATURE Ta maximum 50C and minimum 10 C. No chilling of the Lightline modules, Ligthline module should not be in touch with cold air, it needs to be insulated from cold surfaces. Also, it should not be mounted on metal surface, parts. ENVIROMENTAL PARAMETERS Ligthline contains Mercury and Fluorescent powder which can damage the environment, it must be disposed of responsibly at end of life in accordance with local regulations.
For more information please visit www.3form.eu or email info@3form.eu or call +31 (0) 88 336 76 00 15-07-11 3form BV, All rights reserved
For more information please visit www.3form.eu or email info@3form.eu or call +31 (0) 88 336 76 00 15-07-11 3form BV, All rights reserved
IDENTIFICATION Lightline modules have two identification labels attached. Illsutration 4 - Lightline label 1 with explanation
For more information please visit www.3form.eu or email info@3form.eu or call +31 (0) 88 336 76 00 15-07-11 3form BV, All rights reserved
Peripherals
POWER SUPPLY Input voltage 100-240 VAC 45-60-100-150 Watt 50/60Hz Class 2 Power supply On the mains side standard EU connector Plug & Play 45-60-100-150 Watt 250mm cable on mains side, 500mm cable on the Lightline side There are various power supplies with capacity of 45Watt, 60Watt, 100 Watt or 150Wtt available for Lightline. Suitable capacity power supply unit must be used. Power supplies are based on a maximum load of 63% , due to the ignition performance of the lamps, extending lifetime. Power supplies used in closed environment may suffer reduced lifetime. Table 2 - Available power supplys and part numbers Name Powersupply 230Volt AC/ 45Watt / NectorS Powersupply 230Volt AC/ 60Watt / NectorS Powersupply 230Volt AC/ 100Watt / NectorS Powersupply 230Volt AC/ 150Watt / NectorS Part Number I0106.1 I0107.1 I0108.1 I0109.1 Illsutration 5 - Power Supply
For more information please visit www.3form.eu or email info@3form.eu or call +31 (0) 88 336 76 00 15-07-11 3form BV, All rights reserved
Table 3 - Available Nector S connection system components and part numbers Name Nector S T splitter Nector S Distributor Nector S Extension cable 0.5mtr Nector S Extension cable 1mtr Nector S Extension cable1.5mtr Nector S Extension cable 2mtr Part Number K0099.1 K0100.1 K0095.1 K0096.1 K0097.1 K0098.1
For more information please visit www.3form.eu or email info@3form.eu or call +31 (0) 88 336 76 00 15-07-11 3form BV, All rights reserved
10
Part Name Chroma Panel 25.4mm Lightline module (Exit 3) Power Supply 100Watt
(1) Chroma Accent/Glow panel - Double sided ligthing Total Footprint: Panel: Qty 1 2 1 1 1219x2400mm Chroma panel 25.4mm Part Number PE_chroma/glow E2324.1 I0109.1 K0099.1
Part Name Chroma Panel 25.4mm Lightline module (Exit 3) Power Supply 150Watt Nector S T splitter
(2) Chroma Accent/Glow panels - Double sided ligthing Total Footprint: Panel: Qty 2 4 2 2 2438x2400mm Chroma panel 25.4mm Part Number PE_chroma/glow E2324.1 I0109.1 K0099.1
Part Name Chroma Panel 25.4mm Lightline module (Exit 3) Power Supply 150Watt Nector S T splitter
(3) Chroma Accent/Glow panels - Double sided ligthing Total Footprint: Panel: Qty 3 6 3 3 3657x2400mm Chroma panel 25.4mm Part Number PE_chroma/glow E2324.1 I0109.1 K0099.1
Part Name Chroma Panel 25.4mm Lightline module (Exit 3) Power Supply 150Watt Nector S T splitter
For more information please visit www.3form.eu or email info@3form.eu or call +31 (0) 88 336 76 00 15-07-11 3form BV, All rights reserved
11
For more information please visit www.3form.eu or email info@3form.eu or call +31 (0) 88 336 76 00 15-07-2011 3form BV, All rights reserved
12