Professional Documents
Culture Documents
8051 Flash Magic Manual
8051 Flash Magic Manual
2. Features
Support major Philips devices Lock of programs in chip supported to prevent program copying ZIF socket on-board Compatible 40 pin Microcontrollers Auto Erase before writing andAuto Verify after writing Informative status bar and access to latest programmed file Simple and Easy to use
If you want use this kit to connect in USB port Use our USB to UART Converter
3. Specifications
Dimensions: 180mm x 100mm Power Supply: AC or DCAdapter 12V Interface: RS-232, 9-pin D connector Data Speed: 9600 bps, 8 bits, no parity, 1 stop, no flow control File format: Intel 8-bit HEX Program Sockets: 40 pin DIP - 0.6 Software: Works on Windows 95, 98, Me, 2000, NT , XP
http://www.vegarobokit.com
PIC PROG CD CONTAINS 1. Flash Magic SOFTW ARE 2. DATASHEETS 3. Keil IDE WITH SIMULATION
6. Sof tware
Computer side software calledFlash Magic is executed that accepts the Intel HEX format file generated from compiler Keil to be sent to a t rget microcontroller. It detects the hardware connected to the serial port.
7.Software settings
1. Install the Software Flash Magic 2. Select Serial Port - As per your Computer 3. Select the Chip ( 89V51RD2)(1) 4. Open the Hex file from Browse (3) 5. To program click Start (5) , Then Message will apper press the reset Switch as Shown 6. Press the Reset Switch
http://www.vegarobokit.com
PIC PROG
Programming status as Shown After the Pr ogramming is finished Pr ess the Reset Switch o run T the Pr ogram
http://www.vegarobokit.com
PIC PROG
Contact information
For additional information, please visit http://www.vegarobokit.com For sales office addresses, send e-mail to: info@vegarobokit.com :
MAC-NET TCEHNOLOGY
18,Shree Ganesh Bhuvan, (Kalpana Bldg), ,st Floor, 357-Lamington Road,Opp.Poilce Station 1
Grant Road, (East),Mumbai-400007(INDIA).
Tel : Fax :
http://www.vegarobokit.com