Professional Documents
Culture Documents
Create Your Own Bar Code Font
Create Your Own Bar Code Font
Go to SE73 SAPscript Font Maintenance to create or display the system bar codes. Check on the radio button System Bar Codes. Press display if you want to see different bar codes styles or press change button if you want to create your own bar code style. Unable to render embedded object: File (1.JPG) not found. Now press the change button you will get the following screen.
Press New button. Give the bar code name and short text as BAR_CODE and Demo Bar Code. Press enter.
Check any radio button according to your requirement. I am using Code 39 .Press enter and set bar code alignment as normal, rotated, inverted or bottom up as shown below.
1. 2. 3. 4.
normal -> scan direction is from left to right. rotated -> scan direction is rotated by 90 degree from top to bottom inverted -> scan direction is rotated by 180 degree from right to left bottom-up -> scan direction is rotated by 270 degree from bottom to top Set the bar code parameters, width, height, etc., according to requirement as shown below.
Save the bar code definition. Here you have created a demo bar code as shown below.
You can see the print preview of your created bar code as executing it as shown below.
Click on Header data and enter the standard paragraph as P1 as shown below.
Import the bar code that you created using SE73 into your character formats as shown below.
Use that bar code character format into your smart form
Start transaction SMARTFORMS and create a smartform ZSFS_BARCODE as shown below.
Click on Form attributes and import the smart style's character format that you have recently created in the output option as shown below. Define import parameter into the import tab of form interface as shown below.
Now in Global Definition->Global Data, declare the following. Variable Name Type assignment MARA ITAB WA TYPE Associated type MARA
As shown below.
Since input is coming from Mara, we need to declare MARA as input parameter. Since we are writing the output on itab, we need to declare itab as output parameter. Then write the required coding as mentioned above. Then right click %CODE1 New Program line in left as marked above. Then create a loop. In that loop->Data.
Then create text element by right clicking the Program line just created.
Enter the field that you want to print as in the form of bar code. Use that character format into your output parameter as shown below.
Save and activate your smart form. Execute your smart form as shown below, you will get the material number as in the form of bar code. The print preview is shown below.