Professional Documents
Culture Documents
Media - 69228 - UI 83300-EN-0815
Media - 69228 - UI 83300-EN-0815
USER INSTRUCTION
83300_012
Contents
Contents
GENERAL .................................................................................................... 3 SAFETY INSTRUCTIONS ............................................................................. 4 General information............................................................................... 4 Always check products and equipment before use................................. 4 Do not combine products ...................................................................... 4 Always use personal fall arrest equipment.............................................. 5 Inspection after a fall.............................................................................. 5 Remember ............................................................................................. 5 TECHNICAL DATA...................................................................................... 6 Main parts.............................................................................................. 6 ASSEMBLY .................................................................................................. 7 Rigging .................................................................................................. 7 Final Assembly..................................................................................... 12 Safety check before initial use.............................................................. 12 Check .................................................................................................. 13 PFPE Guide.......................................................................................... 14 20 ft long trailer (6,09 m) ............................................................... 14 40 ft long trailer (12,18 m) ............................................................. 16 Safety checks PFPE ......................................................................... 17
General
General
The Combisafe Loading System has been designed to allow the loading and unloading of equipment from the top of a flatbed delivery truck/trailer in a safe manner. The system stands approximately 6 metres in height to the anchor point position allowing the operative to work up to 5 metres in height from ground level with a working radius of up to 3.5 metres. Incorporated into the Combisafe Loading System is a retractable fall arrest block which is anchored directly to the system's anchorage point and connected to the full body safety harness worn by the operative. Tested to prove compliance with EN 795 Class B standards, the Combisafe Loading System can be used on a site or in a loading yard and can be moved to alternative locations as the needs arise. The Combisafe Loading System incorporates an Alsipercha unit, which can be separated and folded up for ease of transport between locations.
Safety instructions
Safety instructions
General information
The Combisafe safe loading system is only intended for the purpose stated in this user instruction in preventing an operative from a fall incident when loading/ unloading flatbed delivery vehicles. Under no circumstances should the product be used as a makeshift crane or lifting/lowering device. Under no circumstances should substitute items other than those provided with the system be used either in replacement or through preference as this may affect the performance of the product. Care should be taken in the transportation of the product between uses and locations. If any damage occurs the item should be replaced. The site location of the equipment should have in place a rescue plan, in the event of a fall arrest incident. It is strongly recommended that a recovery line is attached to the retractable fall arrest block to enable the operative to pull the inertia reel down to their level to enable simple connection.
Safety instructions
Remember
Plan the fall prevention at an early stage, this will benefit everyone. Only use inspected safety products. Restrict access below and around installation and working area to prevent injury to others from any fall hazard. Use tools designed for the type of work to be carried out. Check all clips are fixed correctly and straps are tightened securely. Keep the installation area in order. A safe workplace is an agreeable workplace. Many fall accidents occur from a low height.
1974_600
Technical data
Technical data
Main parts
2500
5
6120
3 2 1
1400
83300_001
Item 1 2 3 4 5 6
Description Ballast (total) Base unit (Bottom Section) Top section Column Unit Alsipercha Frame Retractable fall arrest block
Assembly
Assembly
Rigging
The following information and diagrams is a step by step guide to rigging one Combisafe loading system unit successfully. Before attempting the rigging of a Combisafe loading system unit, please make sure you have the following tools: Hammer Spirit Level 36 mm spanners 1. Adjust the feet to make the base unit level on the ground. The maximum inclination that the base unit can be placed upon is shown below.
7
83300_002
Figure 3. Maximum inclination 2. Using a forklift truck Place the three 1000 kg concrete ballasts onto the base unit one after the other.
83300_003
Assembly
3. Place the column unit through the column collar and into the centre of the top sections angle supports. This must be carried out using a safe means of access i.e. MEWP or fork lift basket.
3 2 1
6
1. 2. 3. 4. 5. 6. Braces Centre of angle supports Column collar Column unit Conical tube Angle bracings
83300_004
Assembly
4. The Alsipercha frame can now be lowered by a forklift truck or crane and slotted into the cone that is cast into the column unit until it is fully engaged in position. This must be carried out using a safe means of access i.e. MEWP or fork lift basket.
NOTE
After docking the frame to the column unit: Ensure the tie rope is fitted to the lengthener.
83300_005
Assembly
5. Using a forklift truck, place the forks underneath the top plate and lift top section (with the Alipercha frame included) over the top of the base unit and slowly lower the legs of the top plate into the legs of the base unit, using the leg guide to help them engage.
NOTE
The unit must be secured in one direction to prevent rotation. We Recommend that a rope is tied to the to the fall arrest block karabiner to enable the operative to retrieve the reel and allow simple connection to the operatives 0.3 m extra webbing.
1
83300_006
10
Assembly
6. Once in position the 26 mm holes in the top and bottom section should be aligned. Use M24x130 mm bolts and nuts to secure the two sections together.
NOTE
Risk of finger injury!
NOTE
We recommend using Zinc coated full nuts throughout the system, and each one must be tighten up securely. Always use PPE during assembly and disassembly of the Combisafe safe load system.
83300_007
11
Assembly
Final Assembly
12
83300_008
Assembly
Check
Checking should be performed by a competent person. Checking includes: Checks for weld damage of deformation. Wear on retractable fall arrest block. Nuts and bolts are secured properly. Frame should be fully engaged in the in the cone inside the column unit. Where the base is positioned directly onto the ground, as against on a concrete hard standing, sole plates of suitable size and strength to safely transmit and sustain a load of up to 2.0 tonnes should be placed under the adjustable feet of the base.
13
Assembly
PFPE Guide
20 ft long trailer (6,09 m) For unloading a 20 ft flatbed truck, only one Combisafe loading system is required. It needs to be positioned centrally to trailer at a minimum of 100 mm from the edge of the base to the edge of the trailer. As shown below:
3000
3000
4 3
100
1
1. 2. 3. 4. Combisafe loading system unit Alsipercha frame 6,3 inertia reel Operative
[mm]
14
83300_009
2400
Combisafe Loading System Any operative unloading a 20 ft flatbed trailer should be wearing: appropriate footwear reflective vest and helmet with chin strap fully body harness extra webbing 0,3 m for extended back anchorage.
Assembly
Once an operative is wearing the correct PFPE they can then attach the extra 0,3 m webbing to the harness by looping it through itself, and then attach the other end of the extra 0,3 m webbing to the retractable fall arrest block, using a Karabiner fixing.
NOTE
The retractable fall arrest block should consist of a 6,3 m inertia reel. The operative must be connected to the system before accessing the flatbed.
15
Assembly
40 ft long trailer (12,18 m) As can be seen from the image below, when loading/unloading a 40 ft trailer, two Combisafe loading systems are required to work in together. The edge of each base remains at 100 mm from the edge of the trailer. The operative should be connected to both the Alsipercha frames. This helps to control the movement of the operative on the 12 m long flatbed in the event of a fall. If access to the extreme outside corners of the flatbed is required it is recommended that the trailer is moved to accommodate safe access within the 3,5 m working radius of the frame.
3100 6000 3100
4 3
100
[mm]
4600
1. 2. 3. 4. Combisafe loading system unit Alsipercha frame 10 m inertia reel Operative
16
83300_010
2400
Combisafe Loading System Any operative unloading a 40 ft flatbed trailer should be wearing: Appropriate footwear Reflective Vest and helmet with chin strap Fully Body Harness Extra Webbing 0.3m for extended back anchorage
Assembly
Once an operative is wearing then the correct PFPE they can then attach the extra 0.3m webbing to the harness by looping it through itself, and then attach the other end of the extra 0.3m webbing to both retractable fall arrest blocks from each system, using a Karabiner fixing.
NOTE
The retractable fall arrest block should consist of a 10 m inertia reel to allow the operative to move freely to the far extents of the trailer. The operative must be connected to both systems before accessing the flatbed. Safety checks PFPE Safety Checks for PFPE include: Wear on retractable fall arrest block. Check that the reel engages when pulled. Karabiners are full tightened before using the system. All straps on body harness are tightened securely.
17
Assembly
18
Assembly
19
COMBISAFE