Professional Documents
Culture Documents
Válvula de Bola
Válvula de Bola
R910
111
March 2003
ISO 9001
6-210GB
EN331/98
under extreme conditions, because of pressure, temperature or mechanical stress. Assembly of the stem from inside of the body, which is tamper proof, renders R910 the best product in gas distribution lines both inside and outside buildings. Materials used for the new prole seats and for the ORings allow the use in maximum safety conditions with cold and hot water, alimentary uids, gases, hydrocarbons, compressed air, dry steam.
Stem assembled from inside as tamper proof feature Ball of the DADO serie from hot forging Seats with low friction prole Other sizes available in alternative models: R911 with Aluminium T handle in 3/8 and 11/4 sizes
Use
Technical Data
Body in Brass Nickel plated Double ORing on the stem in Fluorine Carbon, Ball of the DADO serie in diamond Brass, and anti friction ORing in P.T.F.E. Nickel and Chrome plated Steel lever handle coated by insulating Seats of the ball in P.T.F.E. plastic
Materials
Dimensions
C
R910
A H
#
DN 1/4" 8 3/8" 10 1/2" 15 3/4" 20 1" 25 # 1"1/4 32 # 1"1/2 40 # 2" 50 # 2"1/2 65 # 3" 80 # 4" 100
H 17 21 25 31 39 48 54 67 82 96 123
DN
Valves approved according to the Directive PED 97/23/CE and CE1115 marked
This technical communication has an indicative value. Giacomini S.p.A. has the right to make in anytime, without previous advice, modications to the products contained in the present communication for technical or commercial reasons. Information reported in this technical communication does not free the user from scrupulously following the existing technical instructions. A reproduction, also partial, of the text is forbidden, except for previously written authorisation from the Management.