Professional Documents
Culture Documents
Especificaciones Datasheet Sensor de Humedad y Temperatura EE160
Especificaciones Datasheet Sensor de Humedad y Temperatura EE160
Specially designed for HVAC, the EE160 sensor by E+E Elektronik is a costeffective, highly accurate and reliable solution for measuring relative air humidity and temperature. The enclosure minimizes installation costs and provides outstanding protection against contamination and condensation, thus ensuring flawless operation. The EE160 employs the new humidity/temperature E+E sensor element HCT01 with excellent long term stability and resistance against pollutants. In combination with a long calibration experience, the EE160 provides a measurement accuracy of 2.5%RH and is available for wall or duct-mounted with current, voltage or Modbus RTU output.
EE160
A configurator makes it possible to freely select the scaling of the temperature output and configure the Modbus parameters. The configurator software, which is free of charge, allows additionally for an on-site adjustment of the humidity and temperature.
External mounting holes Mounting with closed cover Electronics protected against construction site pollution Easy and fast mounting
Electronics on the Underside of the PCB Optimum protection against mechanical damage during installation
E+E Humidity sensor HCT01 Long-term stability Protected RH sensor surface Protected solder pads Tested according to automotive standard AEC-Q200
40
v1.3
EE160
Technical data
Relative Humidity Sensor Analog output 0...100% RH Digital output Working range Accuracy at 20C Temperature dependency Temperature Sensor Analog output1) Digital output T-Accuracy at 20C passive T-output Power supply for 0 - 10 V / RS485 for 4 - 20 mA Current consumption Analog Digital Connection Housing / protection class Cable gland Sensor protection Electromagnetic compatibility Temperature ranges
1)
Measured values
E+E Sensor HCT01-00D 0-10 V -1 mA < IL < 1 mA oder 4-20 mA (two-wire) RL < 500 Ohm RS485 10...95% RH 2.5% RH typ. 0.03% RH/C Pt1000 (tolerance class B, DIN EN 60751) 0-10 V 4-20 mA RS485 0.3C see ordering code
General
15 - 35V DC or 24V AC 20% 10V + RL x 20 mA < UV < 35V DC with DC power supply typ. 5mA with AC power supply typ. 13mA with DC power supply typ. 15mA with AC power supply typ. 25mA Screw terminals, max. 1.5 mm Polycarbonate (UL listed) / IP65 M16 x 1.5 membrane filter EN61326-1 EN61326-2-3 Operating temperature: -15...60C Storage temperature: -25...60C
eff eff
2
( 5...140F) ( -13...140F)
Dimensions (mm)
CONDUIT KNOCKOUT
Type A EE160
Type B 41
Connection diagram
EE160-HT3xxx
8 7 6 5
EE160-HT6xxx
EE160-HTx3xx
Ordering Guide
Configuration
Model
humidity + temperature
ANALOG1)
(HT) 0-10V 4-20mA none (3) (6) (x)
DIGITAL1)
RS485 none
PASSIVE T-Sensor2)
(3) Pt 100 DIN A (x) Pt 1000 DIN A NTC 10k none (A) (C) (E) (x)
HOUSING
polycarbonate (P)
TYPE
wall mount duct mount (A) (B)
filter
membrane filter (B)
SCALING
UNIT
(M) (N)
C F metric -20...80 (024) -32...122 (076) non-metric -40...60 (002) -40...140 (083) -10...50 (003) 0...180 (026) 0...50 (004) other Scalings see Datasheet T-Scaling
BAUDRATE
(1) 9600 19200 38400
PARITy
(A) odd (B) even (C) no parity
2)
STOPBITS
(O) 1 stopbit (E) 2 stopbit (N)
UNIT
(1) metric (2) non-metric (M) (N)
1)
Accessories
- EE160 Cable for configuration adapter (analog) (HA011059) - EE160 Cable for configuration adapter (digital) (HA011055) - Configuration adapter (HA011050)
Order example
Analog output EE160-HT6xAPAB-Tx001M
Model: humidity + temperature transmitter Analog output: 4-20mA Passive T-Sensor: Pt 100 DIN A Housing: polycarbonate Type: wall mounting Filter: membrane filter Output scaling: temperature Scaling: -30...40 Unit: metric
42
EE160