Professional Documents
Culture Documents
2N2219 D PDF
2N2219 D PDF
NPN Silicon
Features http://onsemi.com
COLLECTOR 3 2 BASE 1 EMITTER
THERMAL CHARACTERISTICS
Characteristic Thermal Resistance, Junction to Case Symbol RqJC Max 50 Unit C/W
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
ORDERING INFORMATION
Device JAN2N2219/A JANTX2N2219/A JANTXV2N2219/A JAN2N2219AL JANTX2N2219AL JANTXV2N2219AL TO5 Bulk TO39 Bulk Package Shipping
IEBO
ICES
ICBO
VCE(sat)
Vdc
VBE(sat)
Vdc
Cobo Cibo
pF pF
toff
ns
http://onsemi.com
2
A B P L C A K E
NOTE 7 SEATING PLANE
NOTE 5
NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: INCHES. 3. DIMENSION J MEASURED FROM DIAMETER A TO EDGE. 4. LEAD TRUE POSITION TO BE DETERMINED AT THE GUAGE PLANE DEFINED BY DIMENSION R. 5. DIMENSION F APPLIES BETWEEN DIMENSION P AND L. 6. DIMENSION D APPLIES BETWEEN DIMENSION L AND K. 7. BODY CONTOUR OPTIONAL WITHIN ZONE DEFINED BY DIMEN SIONS A, B, AND T. 8. DIMENSION B SHALL NOT VARY MORE THAN 0.010 IN ZONE P. DIM A B C D E F H J K L M N P R T U MILLIMETERS MIN MAX 8.89 9.40 8.00 8.51 6.10 6.60 0.41 0.53 0.23 3.18 0.41 0.48 0.71 0.86 0.73 1.02 38.10 44.45 6.35 --45_BSC 5.08 BSC --1.27 1.37 BSC --0.76 2.54 --INCHES MIN MAX 0.350 0.370 0.315 0.335 0.240 0.260 0.016 0.021 0.009 0.125 0.016 0.019 0.028 0.034 0.029 0.040 1.500 1.750 0.250 --45 _BSC 0.200 BSC --0.050 0.054 BSC --0.030 0.100 ---
DETAIL X
H M C J
N
2 1 3
http://onsemi.com
3
A B P L C A K E
NOTE 7 SEATING PLANE
NOTE 5
NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: INCHES. 3. DIMENSION J MEASURED FROM DIAMETER A TO EDGE. 4. LEAD TRUE POSITION TO BE DETERMINED AT THE GUAGE PLANE DEFINED BY DIMENSION R. 5. DIMENSION F APPLIES BETWEEN DIMENSION P AND L. 6. DIMENSION D APPLIES BETWEEN DIMENSION L AND K. 7. BODY CONTOUR OPTIONAL WITHIN ZONE DEFINED BY DIMEN SIONS A, B, AND T. 8. DIMENSION B SHALL NOT VARY MORE THAN 0.010 IN ZONE P. DIM A B C D E F H J K L M N P R T U MILLIMETERS MIN MAX 8.89 9.40 8.00 8.51 6.10 6.60 0.41 0.48 0.23 3.18 0.41 0.48 0.71 0.86 0.73 1.02 12.70 14.73 6.35 --45_BSC 5.08 BSC --1.27 1.37 BSC --0.76 2.54 --INCHES MIN MAX 0.350 0.370 0.315 0.335 0.240 0.260 0.016 0.019 0.009 0.125 0.016 0.019 0.028 0.034 0.029 0.040 0.500 0.580 0.250 --45 _BSC 0.200 BSC --0.050 0.054 BSC --0.030 0.100 ---
DETAIL X
H M C J
2 1 3
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLCs product/patent coverage may be accessed at www.onsemi.com/site/pdf/PatentMarking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Typical parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
http://onsemi.com
4
2N2219/D