Professional Documents
Culture Documents
Sami Ye
Sami Ye
After filtering and reducing the pressure of the compressed air, the air will sent to two circuits. The dry air is sent to the die and feeder through one circuit, through the next circuit the lubricated air is sent to break clutch. The dry air passes through the distributor (1) and this dry air divides in to four lines. This passes through the solenoid valves
yv14, yv24, yv15. The other one is circulates through the distributor for auxiliary purpose. The air passes through the valves, yv24, and yv15 is used to lower rake distributing or to push the caps from two
sides.The last solenoid valve (yv14) is used for punching. Details are shown in the figure given below.
October 1, 2013
The lubricated air will branches in to two path .one for the break and Clutch, the other reaches yv1 for holding down, yv2 for feed and
October 1, 2013
The other path that passes through the distributor (2) will divides in to two paths one for yv12and yv13 for diverting and plate lubricating Spray pump respectively.
October 1, 2013
The other one will divides in to 6 paths which is shown in the figure
BELOW.
October 1, 2013
October 1, 2013
October 1, 2013
The air IS passes through distributor (3) and actuates cylinders (cy-8-1,
October 1, 2013
October 1, 2013
The air passes through the pressure reducing valves and passes through the distributor (4), and actuates (cy-22-1, cy-22-2, cy-22-
3, cy-22-4)
October 1, 2013
The air passes through the distributor (4) and actuates (cy-3-1, Cy-
10
October 1, 2013
11
October 1, 2013
sa
12