Professional Documents
Culture Documents
Tema2 RJ45 Serial Cables
Tema2 RJ45 Serial Cables
8P8C - RJ45
Ethernet standards use the same connector: 8P8C (8 Position 8 Contact,) usually called RJ45 in the context of Ethernet over twisted pair.
Pins Description
Pin ! ! ! ! ! ! ! ! 1 2 3 4 5 6 7 8 Function TX+ Transceive data + Transceive data RX+ Receive data + BDD+ Bi-directional data + BDD- Bi-directional data RX- Receive data BDD+ Bi-directional data + BDD- Bi-directional data How to make Cat5/Ethernet (RJ45) and serial cables
Pins positions
! Video
http://www.youtube.com/watch? v=0Y5FYcvxP60&feature=related
How to make Cat5/Ethernet (RJ45) and serial cables
10
11
12
13
14
Soldering
What is soldering?: ! Soldering is putting together two metals, which remain phisically and electrically joined. ! In order to solder, we need the two parts to put together, solder and a soldering iron.
15
16
Soldering Results
! Good soldering:
! Bad soldering:
17
PRECAUTIONS
Avoid burning risks
- Make sure the tip of the soldering iron is properly fixed. - Dont sake the solder attached to the tip: use the wet sponge.
18
PRECAUTIONS
Avoid electrical risks
-! Make sure that the equipment is disconnected from the power supply. -! Use the appropriate size of the tip of the soldering iron in order to avoid unwanted short circuits. -! Solder on a unidorm and insulating surface.
How to make Cat5/Ethernet (RJ45) and serial cables
19