Professional Documents
Culture Documents
The New LPX Finish For DLW Linoleum LPX Finish - The Benefits
The New LPX Finish For DLW Linoleum LPX Finish - The Benefits
Armstrongs LPX Finish offers a cost-effective alternative to its unique PUR-surface. A factory-applied, water-based synthetic coating, the LPX Finish preserves the natural beauty and ecological benefits of linoleum in the long term.
Low maintenance costs LPX Finish at a glance: Virtually Maintenance-free* Low maintenance costs Flawless appearance Prolonged performance *p lease refer to our complete LPX cleaning instructions which you can find at www.armstrong.com/commflreu/en-gb/lpx.html Appropriately sized and well positioned, walkway zones in good condition are half the battle. If regularly swept clean, the surface can be further protected by the regular use of appropriate damp mopping products or spray cleaners. Polishing will compress the surface coating and enhance performance. DLW Linoleum LPX Finish can be cleaned manually or mechanically. Flawless finish Distinctive colours and a natural look: DLW Linoleum with LPX Finish. Optimised to prevent dirt and dents. As with standard linoleum, DLW Linoleum with LPX Finish can be restored using basic m aterials if damaged. Prolonged Performance Its excellent, hard wearing characteristics mean that DLW Linoleum with LPX Finish can even be used in higher traffic areas (e.g. schools). And of course even with LPX Finish you get all the ecological and hygienic advantages of DLW Linoleum. *p lease refer to our complete LPX cleaning instructions which you can find at www.armstrong.com/commflreu/en-gb/lpx.html
Flawless appearance and low maintenance costs with DLW Linoleum LPX Finish.
Armstrong Floor Products Europe Commercial Sales Office Fleck Way, Teesside Industrial Thornaby TS17 9JT Tel 01642 768 660 Fax 01642 768 822 customerserviceuk@armstrong.com
FPS95100099800
www . A R M S T R O N G . E U
Edition 08/2007
! W E
T H E
F L O O R
Cleaning at the end of construction - Vacuum/brush, mop - M achine clean floor covering if required S ingle-disk machine, 150 180 RPM max. Scrubbing brush or red 3M pad N eutral or alcohol-based cleaning agents (if nec. intensive pH < 9) - Rinse off with clean water Factory-applied LPX should not be removed. Maintenance cleaning Low degree of soiling and/or loose dirt: - R emove by vacuuming/brushing or mop Vacuum cleaner Disposable mopping pads Mopping system with pads Mopping cleaning agent
Restoration of protective finish - C overing areas are partially or fully buffed to give an even matt surface to the existing protective film/coating S ingle-disk machine (e.g. Nilfisk 545) with at least 300 RPM. Polishing pad, e.g. beige or red 3M pad
- R emove dust - I f necessary, mop - A pply a protective finish P olymer dispersion / Maintenance emulsion
A fresh, distinctive look thats easy to clean and easy to look after. The new LPX Finish from Armstrong.
Adhered contamination: Available products with LPX Finish: Marmorette Marmorette Acoustic Marmocor Colorette LinoArt Star UniWalton Granette Linodur Linoleum LCH 2.5 mm 3.2 mm 4.0 mm 2.0 mm 2.5 mm 3.2 mm 2.5 mm 2.5 mm 3.2 mm 3.2 mm 4.0 mm Regular polishing seals the surface and improves the durability of the floor covering, as well as providing better protection against most scuffing agents. - L arger areas: use the Twin-bucket mopping method or a suitable industrial vacuum cleaner - S maller areas: Spray until moist and collect loosened dirt with cleaning cloths Mopping cleaning agent and spray Mopping system with pads
- I f application is only partial, the cross-over areas must be matched up by polishing S ingle-disk machine with at least 300 RPM. Polishing pad, e.g. beige or red 3M pad
Special property requirements* - D epending on the conditions in the building/ if heavily used, it may be necessary to apply two coats of polymer dispersion - S ufficient drying time must be ensured between applicationsn
* p lease refer to our complete LPX cleaning instructions which you can find at www.armstrong.com/commflreu/en-gb/lpx.html