Professional Documents
Culture Documents
RJ45 Patch Panel Installation Sheet
RJ45 Patch Panel Installation Sheet
May 2001
Copyright 2008 by Kentrox, Inc. All Rights Reserved. The material discussed in this publication is the proprietary property of Kentrox, Inc. Kentrox retains all rights to reproduction and distribution of this publication. Kentrox is a registered trademark of Kentrox, Inc. Applied Innovation, Applied Innovation Inc., the AI logo, and other names are the intellectual property of Kentrox. All other product names are trademarks or registered trademarks of their respective owners. Information published here is current as of this documents date of publication, but is subject to change without notice. You may verify product information by contacting our headquarters in Oregon. Kentrox is an Equal Opportunity/Affirmative Action employer.
Kentrox, Inc. 5800 Innovation Dr. Dublin, Ohio USA 43016-3271 Toll Free: (800) 247-9482 International: +1 (614) 798-2000 Fax: +1 (614) 798-1770 20010 NW Tanasbourne Dr. Hillsboro, Oregon USA 97124-7104 Toll Free: (800) 733-5511 Direct: (503) 643-1681
Introduction
Introduction
The RJ45 Patch Panel provides 48 straight-through RJ-45 connections. The patch panel has 48 RJ-45 connectors on the front and 48 corresponding RJ-45 connectors on the rear. Reversible mounting flanges enable installation to a 19-inch or 23-inch rack. Figure 1 shows the RJ45 Patch Panel and Table 1 lists its specifications.
1
Network Side
5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
Front View
24 23
48
47
46
45
44
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
25
Rear View
Figure 1 RJ45 Patch Panel Table 1 Specification for RJ45 Patch Panel Description Mounting I/O Connections Throughput Weight (approximately) Size Specification Reversible mounting flanges enable installation to a 19-inch or 23-inch rack 48 RJ-45 connections 100 Mbps, maximum 5 lb (2.25 kg) Height: 2 in. (5.08 cm) Width: 16.75 in. (42.55 cm) without flanges Depth: 3 in. (7.62 cm)
Installation Procedure
Installation Procedure
1. Attach the mounting flanges as shown in Figure 2. Note that there is a left and right mounting flange. 2. Connect the tie bars to the front and rear of the RJ45 Patch Panel. (See Figure 2.) Note: The RJ45 Patch Panel includes tie bars that mount to the patch panel. Optional 19-inch tie bars (06-410-001) and 23-inch tie bars (TYBAR) that mount to the rack are available by contacting your sales representative. 3. Mount the RJ45 Patch Panel to a 19-inch or 23-inch rack. 4. Attach cables to the RJ-45 connectors. Securely fasten the cables to the tie bars. 5. (Optional) Attach identification labels. (See Figure 3.)
1 2
Network Side
5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
Tie Bar
1 2 3 4 5 6 7 8 9 10 11 12
13 14 15 16 17 18 19 20 21 22 23 24
Network Side
5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
25 26 27 28 29 30 31 32 33 34 35 36
37 38 39 40 41 42 43 44 45 46 47 48
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
Installation Procedure