Professional Documents
Culture Documents
FRSC Letter 2
FRSC Letter 2
FRSC Letter 2
REGISTRATION OF ROAD SAFETY CLUB AT CITY OF KNOWLEDGE ACADEMY IJEBU ODE The City of Knowledge Academy is a Co- educational Secondary School established to provide excellent academic and leadership training for young minds. We appreciate to your efforts at improving the level of sanity on our roads and among road users throughout this country. As part of our contribution to this campaign and assist members of the City of Knowledge Academy community enhance safety awareness on our roads, we therefore request for your permission to establish and register the Road Safety Club in the School in line with Federal Road Safety Corps Establishment Act of 2007. It will highly appreciative if the following Management Staff are resister as Special Marshal under your unit to compliment the effort of Regular Marshal within Ijebu Ode. Our Director, Head of School, Vice Principals and Co-ordinator, Road Safety Club in our School We are looking forward for the reply to our request. Yours faithfully
Materials:
1-1/4 pocket hole screws 1-1/4 screws Hinges Wood Glue Sandpaper (100, 150, 220 grits) Finishing supplies (primer and paint, or stain, sealer)
Lumber:
2 12 at 6 2 13 at 8
1 112 at 8
Cut List:
4 13 at 40 Legs 2 13 at 11-1/4 Upper Stretchers 6 12 at 11-1/4 Stretchers 2 12 at 17-13/16 Side Stretchers 3 112 at 30 Shelves
Click on the drawings for a larger view! 1. Cut the pieces for the legs. Cut a 15 degree bevel in the bottom of each leg so the legs will stand properly at an angle. Cut the pieces for the stretchers. With the pocket hole jig set for 3/4 material, drill pocket holes in each end of each piece. Secure to the legs as shown using glue and 1-1/4 pocket hole screws.
2. Install the hinges at the top to connect the two pieces together. Cut the pieces for the side stretchers with a 15 degree angle on each side. Secure as shown (level with the lowest stretcher), then secure using 1-1/4 pocket hole screws. Do not use glue of you want to be able to fold the bookshelf for storage!
3. Cut the pieces for the shelves. Set them on the stretchers making sure there is an equal amount of overhang on each shelf, then secure using countersunk 1-1/4 screws.
Finish as desired!
These DIY plans to build an A-Frame Bookshelf are so easy and perfect for the beginning woodworker! The bookshelf would also be fabulous in a guest bathroom for holding clean towels and other toiletries, or if constructed out of lumber rated for outdoor use (or PVC planks, it would be an awesome plant stand! See? I just came up with a couple more uses I bet you have amny more!
More Topics
This standard six-bottle wine rack is easy to make and takes very little time. Make one for yourself then make one for a friend. The compact size of the rack makes it perfect for a small dining space or to sit on top of the fridge.
We did not finish or paint the wood on our rack, instead we left it natural and added a pop of color with neon string.
o Image 1
o Image 2
11 1
Previous 1 23Next