Professional Documents
Culture Documents
Tutorial On IC Engine Connecting Rod: Hareesha N G Dept of Aeronautical Engg Dayananda Sagar College of Engg Bangalore-78
Tutorial On IC Engine Connecting Rod: Hareesha N G Dept of Aeronautical Engg Dayananda Sagar College of Engg Bangalore-78
11/27/2013
Select XZ plane and create the sketch as shown Use symmetric protrude, depth 33mm
11/27/2013
Select front surface as shown and create the sketch as shown Use cut out, depth 6.5 mm
11/27/2013
Use smart mirror option and select previously created feature, and select mid plane as shown
11/27/2013
Create a parallel plane at distance of 84 from right side surface of the main body and create sketch as shown in fig 1. On right side surface of the main body as shown, create the sketch as shown in fig 2.
fig 2
11/27/2013
fig 1
11/27/2013
Select YZ plane and create the sketch as shown Use Hole option to create the hole as shown below.
11/27/2013
Use smart mirror option to create the feature as shown below and select the mid plane, select both previously created features
11/27/2013
Create angled plane as shown below. Giving 60O angle wrt horizontal plane, taking vertical plane as intersection. Create a parallel plane as shown at distance 42mm from the previously created angled plane. Create hole on parallel plane as shown below. Take front plane create 30 deg line as shown.
11/27/2013
On this 30 deg angled plane create hole as shown below. Also create cutout as shown for depth of 7mm
11/27/2013
10
Mirror the previously created both features as shown below. Selecting smart mirror option and mid plane. Create 3 circles of 24, 26, 24 mm respectively on parallel planes as shown in fig below. Use lofted protrusion to create the feature shown, selecting those three circles.
11/27/2013
11
create protrusion as shown, selecting previously created sketch and using up to next option
Create oil hole using below sketch and using revolved cut out command
11/27/2013
12
Part-2 : Bush
Select XY plane, create the sketch as shown in fig, create feature as shown giving depth of 25mm, symmetric. Create the sketch, on parallel plane which is at a distance of 9mm from center of cylinder, as shown in fig 2 and create cutout, give 0.5 depth Create cutout with 2mm dia circle, use upto next.
11/27/2013
13
11/27/2013
14
11/27/2013
15