Professional Documents
Culture Documents
Battery and Forklift Workshops NOV 2013
Battery and Forklift Workshops NOV 2013
Battery and Forklift Workshops NOV 2013
ITEM NO. DESCRIPTION UNIT 1 Supply and install free standing, low voltage No switch panel as ABB or equivalent comprising a 3 phase 415V, 160-400A TP & N incomer MCCB and outgoers listed below.The pane shall be indoor dustproof complete with 400A bus-bar and bus-bar connections consting of high conductivity copper of BS 158 and B S 159 in bus-bar chamber .NB the panel to be installed at the location where the old switchgear are currently installed. Cable entry shall be bottom entry with appropriate cable trunking. Copper busbars shall be provided in the panel to terminate existing cables inside the panel incase they are short. Cable jointing and cables shall be provided to terminate short cable where neccesary . QTY 1 RATE AMOUNT 1,200,000 1,200,000
2 3
250 A TP MCCB out goer to control switch battery charger 100 A TP MCCB out goer to distribution board at battery and mechanical workshop 100 A TP MCCB out goer to UPS (provision) 250 A TP MCCB for spare 100 A TP MCCB for spare BATTERY WORKSHOP Power points comprising of 5x4.0 mm sq. single core P.V.C insullated copper cable drawn in 40X25 mm2metal trunking
No No
1 2
4 5 6 A 7
No No No NO
1 1 1 9
Supply and install 200 x 50 mm two NO compartiment powder coarted metal trunking complete withbents,corners and curves and T sections Supply and install 12 way distribution board NO c/w 4no. -10A, 30no.-30A and 6n0. spareways as MEM or equally approved Supply and install 30A SP MCB'sas MEM or equally approved NO
4,801.25
24,006
22,655.38 22,655
10
34
754.45
25,651
11
Supply and install 32A TP&n MCB's as ABB or NO equally approved with water proof enclosure Supply and install 63A TP&n MCB's as ABB or NO equally approved with water proof enclosure Supply and install 32A 3-pin idustrial sockets NO outlets complete with male and female Supply and install 63A 5-pin idustrial sockets NO outlets complete with male and female MECHANICAL WORKSHOP Supply and install 12 way consumer unit c/w 3no. -10A, 8no.-30A and 1n0. spareways as MEM or equally approved Supply and install SP MCB'sas MEM or equally approved Supply and install 6way consumer unit c/w 4no. -10A, 2no.-30A as MEM or equally approved Supply and install SP MCB'sas MEM or equally approved 13A metal clad switched Power points comprising of 3x2.5 mm sq. single core P.V.C insullated copper cable drawn in 40x25mm2metal trunking Supply and install 32A TP&n MCB's as ABB or equally approved with water proof enclosure
14
3373
47,222
12
3927
15,708
13
14
1200
16,800
14
2000
8,000
B 15
NO
7,287.00
7,287
16 17
NO NO
11 2
754.45 4,534.00
8,299 9,068
18 19
NO NO
6 5
754.45 2,196.65
4,527 10983.25
20
NO
3373
6,746
21
Supply and install 32A 5 pin idustrial sockets NO outlets complete with male and female Earthing to KPLC standards and IEE regulations with cables,earth rods and pre cast concrete inspection pit Inspection and certfication of the entire installations. SUB-TOTAL ADD 10% Contigency TOTAL ADD 16% VAT GRANT TOTAL SUM
1200
2,400
22
11,218
11,218
23
SUM
47,359