Professional Documents
Culture Documents
Roped Hydraulic Elevator
Roped Hydraulic Elevator
Roped Hydraulic Elevator
OTIS
A Solution from the Ground Up The Otis Roped Hydraulic is a cost-effective, environmentally safe elevator designed for customers seeking an alternative to traditional holed elevators.
Specifications
SPEEDS
Otis 211
DOOR TYPES
Capacity Hoistway width Hoistway depth Minimum pit depth Clear overhead
2,000 2,100 8-0 8-0 5-9 5-9 4-0 4-0 < 100 fpm: 12 O > 100 fpm: 12-3
Note: This information is for typical front-opening arrangements. Specifications may vary depending on local codes. Please contact your Otis sales representative for complete layouts.
approximately 60-0
ARCHITECTURAL
1-4
MAXIMUM NUMBER OF STOPS
Designed for reliability and easy maintenance with a plunger located on each side of the car and a sheave guided by a set of plunger rails. Ropes are fastened to the top of jack stands and the bottom of the car frame. Furnished with an instantaneous safety that is activated by a friction governor and governor-tension sheave. The governor is remotely set from the machine room during testing and automatically resets after powering in the up direction. As a result, a hoistway access door is not required.
7
APPLICATIONS
Ideal for installation at sites with known subterranean risks, waterfront sites and sites with high-water tables. The roped hydraulic is also ideal for existing buildings because the jacks are half the length of the rise and can be easily moved into tight spaces.
Environmentally safe
The Otis Roped Hydraulic offers architects, builders and owners an aboveground solution that minimizes the risk of soil and ground-water contamination. It reduces liability and expensive clean-up costs, while minimizing the risks of cylinder failure and equipment loss.
Cost effective
The Roped Hydraulic saves time and money by eliminating drilling and its associated problems, uncertainties and costs that can be caused by hidden sub-surface conditions, equipment failure or other factors.
Page 1 of 2
LVME
ROPED HYDRAULIC ELEVATOR
OTIS
Governor
Sheave
Cylinder
Page 2 of 2
Otis on the Internet: http://www.nao.otis.com Otis Elevator Company 1997 HYD-1201 (0599)