Professional Documents
Culture Documents
Calibracion PPC-101
Calibracion PPC-101
PPG.IOI
ll
Set-up Procedures
Technical Manual
ll.B
6.
@h
T.
Press
ffi
*",,
@,"
@ rn"n ffi,"
ll.C
1-
Calibration Mode
z.
p ress
l,ffi
f=I
un
W,*,ni8
Hnii3fr
'"+"', L:'
scale will indicate three.point or two-point span adjustment mode and the fraction (i.e. - 0/2, 112 ar 2l2for three-point) of full-scale, in kilograms, that should be placed on the platform.
"
f------l
r{El6il{t
r---l
Ao
Lh
3.
5.
o Lo GltL*.iJ* Lr.lo Qr..v,vt -'?tIn - es?r.* 1,c s^tqo, e[ rrrltnL, Jr ci.L r,. el 9rr?loJ. O
Place one-half of the full scale weight (in kilograms) on the olatform,
i-ffd*
Example: lf the scale capacis is 5 kg/10 lb, place 2500 g on the platform.
6.
YCO-1082-07-01
ol
Il
7
Technical Manual
Set-up Procedures
ll.C
.
Calibration Mode
Add sufficient weight to the platform to bring the total to the full-scale weight in kilograms.
Example: lf the scale capacity is 5 kgl10lb, place another 2500 g on the platform for a total of 5 kg.
Wait for stabilization a \--J to save the new calibration points and retum to Test Mode. The display should indicate 20000 counts +/- 2 counts.
ISt
any time in the span-adjustment to exit to Test Mode without saving any new calibration points.
press
KIat
?*
[[t;, Qretionnr
o rr
10. press
E,n"n Wl"
ll.D
1.
2. 3.
Press enter Factory parameter Mode. ""0 .The steps are the same as in System parameter Mode (see Section ll-B) with the exception that the keywords progress from 51 through gg.
ffi,"
rl--*--rTfH$tT
r----
-l
Nole: Use the Factory Parameter List in Section lV.C to locate the function to be changed- Use the Standard Factory Parameter Settings List in Section lV.D to de_ termine the appropriate parameter value to enter.
YCO-1082-07-01