Download as xls, pdf, or txt
Download as xls, pdf, or txt
You are on page 1of 8

PILE CAPACITY DETERMINATION FOR BORE CAST

INPUTS
Pile Dia (D) Pile effective length End pile point SPT value (corrected) Average SPT value along pile shaft End pile point Cohesion Averrage cohesion along pile shaft Unit weight Pick pressure point (start) Water pressure at pick point Grain Size distribution: Sand Silt Clay Friction capacity factor () 20 in 33 ft 32.5 13.56 0.101 kip/ft2 0.020 kip/ft2 90.500 lb/ft3 15 0.000 kip/ft2 84.00 % 16.00 % 0.00 % 0.239629557 Cohesion Dry density Unit Weight SPT value (>15) Corrected SPT value Plasticity Index (LL-PL) Cohesion (Bottom end) Avrg. Cohesion (shaft)
0.6 0.5 Friction capacity factor 0.4 0.3 0.2 0.1 0 Series1 0 0.5 10 0.24

UNIT CONVERSION

RESULTS
Net end bearing = Net skin friction= Total pile capacity= 10% reduction due to negetive screen friction 83.66 ton 174.00 11.91 185.91 92.96 kip kip kip ton

FOR BORE CAST IN-SITU


0.0100 kg/cm2 0.0209 kip/ft2 Layer depth 18 Cohesion 2.64 Total depth 35.5 Average cohesion 2.62971831 PASS? 7 2.59 3 2.6 4 2.64 3.5 2.67

CONVERSION
0.0130 KN/m2 0.0009 kip/ft2 1.250 gm/cc 77.9027 lb/ft3 41 28 22 0.3439 kip/ft2 0.2299 kip/ft2

DESIGN BY: Abid Moin Uddin EMAIL: Engr.abid@rocketmail.com

10 0.24

20 0.178

30 0.157

40 0.14

50 0.125

60 0.12

70 0.117

80 0.1125

Pile embedment length (metres)

a. End bearing: 1. Sandy soil (q) q End bearing capacity 2. Clay soil End bearing capacity b. Skin friction: 1. Sandy soil 2. Clay soil 10.91544 Kip 23.29834 Kip 8 514.8 260 Kip 189.0778 Kip 0.9072 0.659736 Kip 15 * D= 25 260

Net end bearing = Net skin friction= Total pile capacity=

174.0043 Kip 11.90607 Kip 185.9104 Kip 84.50473 Ton

10% reduction due to negetive screen friction

76.05426 Ton

PILE EFFECTIVE LENGTH Depth(metres) 0 10 20 30 40 2.2625 Kip/ft 50 60 70 80 2.2625 Kip/ft

10.06 m 0.5 0.24 0.178 0.157 0.14 0.125 0.12 0.117 0.1125

0.23963

You might also like