This document contains an exam for the 3Com Wireless Specialist certification. It includes 28 multiple choice questions covering topics like 3Com wireless switch, access point, and mobility system components, configurations, features and specifications. It tests knowledge of wireless networking standards, protocols, security and best practices related to deploying and managing 3Com wireless networks.
This document contains an exam for the 3Com Wireless Specialist certification. It includes 28 multiple choice questions covering topics like 3Com wireless switch, access point, and mobility system components, configurations, features and specifications. It tests knowledge of wireless networking standards, protocols, security and best practices related to deploying and managing 3Com wireless networks.
This document contains an exam for the 3Com Wireless Specialist certification. It includes 28 multiple choice questions covering topics like 3Com wireless switch, access point, and mobility system components, configurations, features and specifications. It tests knowledge of wireless networking standards, protocols, security and best practices related to deploying and managing 3Com wireless networks.
DRAG DROP Match each 3Com Wireless Switch (WX) term with its description.
Answer:
QUESTION 2:
Which functionality is transferred from 3Com Access Points (APs) to the 3Com Wireless LAN Controller/Switch, creating Fit APs or Managed Access Points (MAPs) with the 3Com Wireless LAN Mobility System?
A. Radio frequency (RF) radio, encryption and roaming B. Encryption, roaming and security policy C. Authentication, roaming and security policy D. Encryption, authentication, roaming and security policy E. Encryption, authentication and security policy 3M0-600
Actualtests.com - The Power of Knowing
Answer: C
QUESTION 3:
Wireless LAN (WLAN) IEEE 802.11a Turbo Mode bonds two channels together for up to 108 Mbps data rates.
A. False B. True
Answer: B
QUESTION 4:
Which three steps are required to configure a non-encrypted 3Com Wireless Distribution System? (Choose three.)
A. Ensure all access points (APs) are configured for Managed Access Point (MAP) mode B. Copy the access points (APs) to the Wireless Distribution System (WDS) configuration C. Configure the access points (APs) for bridge mode D. Assign each access point (AP) the same IP address E. Configure the access points (APs) for group mode F. Assign each access point (AP) the same Service Set ID (SSID) and radio channels
Answer: B,C,F
QUESTION 5:
DRAG DROP Arrange the steps to connect to a Wireless Network in Windows XP.
3M0-600
Actualtests.com - The Power of Knowing
Answer:
QUESTION 6:
What can the 3Com Wireless LAN Switch Manager (3WXM) do when it discovers a wireless rogue device?
A. Flood the access point (AP), causing a Denial of Service (DoS) condition B. Verify the IP address of the rouge device and send the information to a Syslog server C. Verify the IP address of the rouge device and send the information to the management software, which blocks future packets from the device D. Deactivate the access point (AP) and send a message to the network management software
Answer: A
QUESTION 7:
DRAG DROP Drag each 3Com Wireless LAN Mobility System product to the set of features it supports. 3M0-600
Actualtests.com - The Power of Knowing
Answer:
QUESTION 8:
What is a key alignment issue when installing an outdoor Wireless LAN (WLAN) panel antenna?
A. Identical vertical and/or horizontal polarization B. Fresnel zone obstructions C. Acknowledgement delay timeout (ACK) setting D. Length of the antenna cable from the wireless bridge
Answer: A
QUESTION 9:
3M0-600
Actualtests.com - The Power of Knowing
Which describes the 3Com Receiver Signal Strength Indicator (RSSI) access point (AP) implementation?
A. AP displays its own signal strength and quality as a percentage value B. AP displays neighbor AP's signal strength and quality as a value from 0 to 255 C. AP displays its own signal strength as a value from 0 to 255 D. AP displays neighbor AP's signal strength as a percentage value
Answer: D
QUESTION 10:
DRAG DROP Drag the 3Com product you would use for each location (A, B and C) to complete the 3Com Wireless LAN Mobility System solution.
Answer:
QUESTION 11:
The network administrator can draw or import a J PEG or AutoCAD building floor plan using the 3Com Wireless LAN Switch Manager (3WXM).
3M0-600
Actualtests.com - The Power of Knowing
A. True B. False
Answer: A
QUESTION 12:
Which three are features of 3Com Dynamic Security Link? (Choose three.)
A. Local and remote access point (AP) authentication and encryption support B. Per user, per session dynamic key encryption C. Internal database supporting up to 1,000 user names and passwords D. 40-, 128- and 168-bit shared key encryption support E. Superior wireless security for networks without a centralized authentication server
Answer: B,C,E
QUESTION 13:
The 3Com Wireless LAN Access Point 8xx0 family supports a single Virtual Access Point (VAP) per RF radio installed in the unit.
A. False B. True
Answer: A
QUESTION 14:
You have installed the 3Com 11a/b/g Wireless PC Card with XJ ACK Antenna card its software. What is the next step required in the PC Card installation before you can access the Wireless LAN (WLAN)?
A. Using Wireless LAN Profile Manager, select the PC Card icon, click "Enable," then choose the appropriate access point (AP) and click "Connect" B. Using Wireless LAN Profile Manager, create a new profile, choose the appropriate access point (AP) and click "Connect" C. Using Wireless LAN Profile Manager, click "Discover" and from the discovered-list choose the appropriate access point (AP) and click "Connect" D. Using Wireless Infrastructure Device Manager (WIDM), choose the appropriate access point (AP) and click "Connect"
Answer: B
QUESTION 15:
3M0-600
Actualtests.com - The Power of Knowing
DRAG DROP Match each security protocol/standard with its description.
Answer:
QUESTION 16:
Every mobility domain should have a minimum of two seed switches assigned one main and one backup.
A. False B. True
Answer: A
QUESTION 17:
Which three are benefits of the 3Com Wireless LAN Mobility System? (Choose three.)
A. Automates access point (AP) management, i.e., adjusts traffic loads, optimizes AP power, changes AP channel assignments B. Provides centralized management for wireless controllers/switches and Managed Access Points C. Enhances user and group security with security profiles D. Improves throughput of critical data with multiple priority queues and queuing 3M0-600
Actualtests.com - The Power of Knowing
algorithms on each wireless controller/switch E. Eliminates the need to install access points (APs) throughout the building
Answer: A,B,C
QUESTION 18:
All 3Com OfficeConnect Wireless 54 Mbps 11g PC Cards support 108 Mbps data rate in Turbo mode.
A. True B. False
Answer: B
QUESTION 19:
DRAG DROP Match each 3Com wireless component with its description. Exhibit: 600-c-45.J PG
3M0-600
Actualtests.com - The Power of Knowing
Answer:
QUESTION 20:
Which three types of wireless devices may be detected as rogues by the 3Com Wireless LAN Switch Manager (3WXM)? (Choose three.)
A. Unauthorized 3Com access point (AP) B. Unauthorized 3Com Wireless LAN Switch/Controller C. Wireless NIC running in ad-hoc mode D. Unauthorized third-party access point E. Authorized wireless NIC
Answer: A,C,D
QUESTION 21:
DRAG DROP Match each IEEE 802.11 standard with its description.
3M0-600
Actualtests.com - The Power of Knowing
Answer:
QUESTION 22:
Which IP route service can be configured on 3Com Wireless Switch/Controller (WXs)?
A. Static routes to forward traffic passing through the WX to a specific IP router, if the traffic is not on a local VLAN or subnet B. Static routes to forward traffic passing through the WX to a specific IP router, if the traffic is on a local VLAN or subnet C. Static routes to forward traffic generated by the WX to a specific IP router, if the traffic is on a local VLAN or subnet D. Static routes to forward traffic generated by the WX to a specific IP router, if the traffic is not on a local VLAN or subnet
Answer: D
QUESTION 23:
Choose the 3Com product that is represented by Sevice A in the network diagram. 3M0-600
Actualtests.com - The Power of Knowing
A. 11a/b/g Wireless LAN Workgroup Bridge B. Wireless LAN Access Point 8750 C. Wireless LAN Switch WX1200 D. Wireless LAN Managed Access Point (MAP) 2750
Answer: A
QUESTION 24:
Why should you use PortFast on the Wireless LAN Switch/Controller?
A. It immediately puts a port into the STP forwarding state, preventing an application from possibly timing out B. It enables J umbo Frames on the port, providing higher data throughput on the link C. It configures all the ports for 1,000 Mbps full duplex, providing maximum throughput D. Like Rapid Spanning Tree Protocol (RSTP), PortFast provides faster convergence for wireless devices when a bridge port goes up or down on the network
Answer: A
QUESTION 25:
Choose the two features supported by the 3Com Wireless LAN Managed Access Point (MAP) 2750. (Choose two.) 3M0-600
Actualtests.com - The Power of Knowing
A. Fit access point B. IEEE 802.1X Network Login and IPSec C. Dual-mode radio allows operation for both IEEE 802.11b/g and IEEE 802.11a D. Dual-mode radio allows operation for either IEEE 802.11b/g or IEEE 802.11a
Answer: A,D
QUESTION 26:
Any one of the VLAN IP addresses assigned to a Wireless LAN Switch/Controller can be used for its management communications.
A. True B. False
Answer: A
QUESTION 27:
What is the benefit of Inter-Access Point Protocol (IAPP) support on the Wireless LAN Access Point 8xx0 family?
A. It allows simultaneous management of multiple access points B. It allows users to roam between access points without re-authentication C. It allows access points to share configuration and forwarding table information D. It allows the access points to create multiple Virtual Access Points (VAPs) for improved wireless security
Answer: B
QUESTION 28:
You have taken a new job as the network administrator. You find a 3Com Wireless LAN 3M0-600
Actualtests.com - The Power of Knowing
Access Point 8750 on a shelf in the network supply closet. What should you do when you are unable to connect a Wireless LAN Access Point 8750 because your predecessor has configured the access point (AP) with an unknown username and password?
A. Reset the AP to its default factory settings by opening the back of the AP and removing the battery for at least 30 seconds B. Use Windows Registry Editor to create and upload the following text to disable the AP security: "HKEY_USERS\.DEFAULT\Software\3Com Corporation\EAPOL\UserEapInfo" C. Reset the AP configuration to factory default by pressing the reset button for at least 15 seconds D. Attach your PC directly to the RJ -45 port on the AP and telnet into the AP
Answer: C
QUESTION 29:
Which three are features supported on the OfficeConnect ADSL Wireless 11g Firewall Router and the 3Com OfficeConnect Wireless 11g Cable/DSL Router? (Choose three.)
A. Stateful packet inspection B. 40/64-bit and 128-bit Wired Equivalent Privacy (WEP) encryption C. VPN termination D. Four 10/100 Ethernet LAN ports E. Power over Ethernet (PoE) F. 256-bit Wi-Fi Protected Access (WPA) encryption
Answer: B,D,F
QUESTION 30:
How does the 3Com Wireless LAN Switch Manager (3WXM) determine the geographic vicinity of a wireless rogue device?
A. By using Global Positioning System (GPS) software B. By triangulation on multiple Wireless LAN Switches/Controllers C. By distance from an authorized Managed Access Point (MAP) or triangulation on multiple authorized MAPs D. By distance from an unauthorized Managed Access Point (MAP)
Answer: C
QUESTION 31:
What is the optimal access point (AP) channel allocation configuration on a Wireless LAN (WLAN)? 3M0-600
Actualtests.com - The Power of Knowing
A. It makes no difference if APs use overlapping or non-overlapping channels B. Allow APs to automatically perform the hunting process to determine the best channels C. APs should be configured with different non-overlapping channels D. APs should be configured with overlapping channels
Answer: C
QUESTION 32:
Which statement is true for Wireless LAN (WLAN) data and throughput rates?
A. Data rates on an IEEE 802.11a/g WLAN are not affected by distance from the access point (AP) B. Data rates drop as the distance to the access point (AP) decreases C. Data rates drop as the distance to the access point (AP) increases D. Actual data throughput on a WLAN is about 25% of the defined throughput rate
Answer: C
QUESTION 33:
Which two are functions of the 3Com Wireless LAN Switch Manager (3WXM) "deploy" command?
A. Sends a configuration file from 3WXM to a 3Com Managed Access Point (MAP) B. Sends a configuration file from 3WXM to a 3Com Wireless LAN Switch/Controller C. Synchronizes configuration information between the 3WXM and a 3Com Wireless LAN Switch/Controller D. Allows a Wireless LAN Switch/Controller to be drawn into a Network Plan Mobility Domain E. Activates a newly loaded configuration file on a 3Com Wireless LAN Switch/Controller
Answer: B,C
QUESTION 34:
Which three are features of the 3Com Wireless LAN Controller WX4400? (Choose three.)
A. External redundant SuperStack RPS B. Power over Ethernet (PoE) C. License upgrade to support a maximum of 96 Managed Access Points D. Stack up to four units together to support a maximum of 144 fit access points 3M0-600
Actualtests.com - The Power of Knowing
E. Four 1,000 Mbps GBICs or 1000BASE-TX ports F. Supports up to 24 fit access points with base model
Answer: C,E,F
QUESTION 35:
What is the purpose of the 3Com Wireless LAN Switch Manager?
A. Configure, deploy and manage any 3Com wireless product B. Configure, deploy and manage 3Com Wireless LAN Mobility Systems, i.e., Wireless LAN Controller WX4400 C. Configure, deploy and manage any wireless product
Answer: B
QUESTION 36:
Which two are performed by the 3Com Wireless LAN Switch Manager (3WXM), during the Compute and Place MAPs process of network planning, to determine the number of Managed Access Points (MAPs) for an area? (Choose two.)
A. Optimal MAP transmit power requirements for RF area coverage B. Capacity calculation to determine the number of MAPs required C. Coverage calculation to determine RF capacity and coverage D. Coverage calculation to determine the RF obstacles for an area
Answer: B,C
QUESTION 37:
Which best describes the 3Com Wireless LAN Controller and/or Switches?
A. Device that centrally controls multiple Managed Access Points (MAPs) using identity-based networking to deliver network services B. Device that centrally controls and powers multiple Managed Access Points (MAPs) using Microsoft Active Directory user identity to deliver network services C. Device that centrally controls multiple fat access points (APs) using IEEE 802.1X Network Login user identity to deliver network services D. Device that centrally controls multiple fat access points (APs) using port-based user identity to deliver network services
Answer: A
QUESTION 38:
3M0-600
Actualtests.com - The Power of Knowing
Which Wireless Infrastructure Device Manager (WIDM) command displays the generic settings of a discovered 3Com Access Point (AP), i.e., device name, type, IP address, MAC address?
A. Show B. Display C. Present D. Properties
Answer: D
QUESTION 39:
Which two are reasons a company may choose to use a building-to-building wireless bridge versus a T1/E1 or fiber link? (Choose two.)
A. The initial installation costs and/or recurring monthly charges B. Time to deploy and set up the connection C. Reliability of the connection D. The distances between the two buildings
Answer: A,B
QUESTION 40:
Which wireless network functions are supported by the 3Com Wireless LAN Switch Manager (3WXM)?
A. Plan, configure and deploy wireless LAN Mobility System B. Plan, configure, deploy and manage wireless LAN Mobility System C. Configure, deploy and manage wireless LAN Mobility System D. Configure the 3Com Wireless LAN Mobility System
Answer: B
QUESTION 41:
What is the first step to configuring the Wireless LAN Access Point 8750 after the access point (AP) is powered on and connected to the Ethernet port of a switch configured with VLANs?
A. Ensure the AP and your PC are connected as tagged members of different VLANs and install and launch the Wireless Infrastructure Device Manager software on your PC B. Connect your laptop PC to the second RJ -45 port on the AP and install and launch the Wireless Infrastructure Device Manager software on your PC C. Ensure the AP and your PC are both connected to the same VLAN and install and 3M0-600
Actualtests.com - The Power of Knowing
launch the Wireless Infrastructure Device Manager software on your PC D. Ensure the AP and your PC are both connected as untagged members of different VLANs and install and launch the Wireless Infrastructure Device Manager software on your PC
Answer: C
QUESTION 42:
DRAG DROP Match each IEEE standard with its description.
Answer:
QUESTION 43:
3M0-600
Actualtests.com - The Power of Knowing
What is the System IP address for the 3Com Wireless LAN Switch and/or Controller?
A. It is the first IP address assigned to the wireless switch used exclusively for management communications B. It is the root IP address of a 3Com Wireless LAN Mobility solution used by all other switch/controllers to establish the wireless network topology C. It is the IP address assigned to the master or seed switch/controller used to manage the entire Wireless LAN Mobility system D. It is one of the VLAN IP addresses assigned to a switch/controller used for wireless switch-to-switch communications within a mobility domain
Answer: D
QUESTION 44:
Which two are features of a Wireless LAN (WLAN) Infrastructure Basic Service Set? (Choose two.)
A. Created when two or more Basic Service Sets are connected together B. Only stations exist in the service area and no access point (AP) is used C. Management and control of the service area is performed by the access point (AP) D. Members communicate directly with each other within the service area E. Also known as an Ad Hoc or Peer-to-Peer WLAN
Answer: C,D
QUESTION 45:
What was a limitation of first-generation Wireless LAN (WLAN) products?
A. Were designed to be managed individually B. Did not support roaming for mobile computers C. Did not provide authentication or encryption services D. Were not designed to support large number of users
Answer: A
QUESTION 46:
DRAG DROP Match each Wireless LAN Mobility term with its description. 3M0-600
Actualtests.com - The Power of Knowing
Answer:
QUESTION 47:
DRAG DROP Match each Radio Frequency (RF) propagation issue with its description. 3M0-600
Actualtests.com - The Power of Knowing
Answer:
QUESTION 48:
Choose the three features supported by the 11g 54Mbps Wireless LAN Indoor Building-to-Building Bridge. (Choose three.) 3M0-600
Actualtests.com - The Power of Knowing
A. Point-to-point or point-to-multipoint configurations B. Multiple antenna options C. Up to 108 Mbps in turbo mode D. Wireless Distribution System (WDS) Bridging E. Weatherproof enclosure
Answer: A,B,D
QUESTION 49:
Which antenna type is typically used indoors to provide large coverage areas within a building?
A. Patch panel or parabolic antenna B. Dipole antenna C. Omnipole antenna D. Yagi or semi-directional antenna
Answer: C
QUESTION 50:
Which three are provided by the 3Com Wireless LAN Site Survey V2.x for discovered access points (APs)? (Choose three.)
A. Type of authentication and encryption activated on the APs B. APs available in your area C. VLAN ID of each AP D. IP address of each AP E. Channel used by each AP F. Radio type for each AP, i.e., 802.1a/b/g
Answer: B,E,F
3M0-600
Actualtests.com - The Power of Knowing
QUESTION 51:
What is the first step a wireless station performs as it attempts to access a wireless network?
A. Beaconing B. Active or passive scanning C. Roaming and reassociation D. Authentication
Answer: B
QUESTION 52:
To configure encryption on an access point (AP) that is part of a Wireless Distribution System (WDS), you must configure each AP separately, using a wired-Ethernet connected computer.
A. True B. False
Answer: A
QUESTION 53:
The 3Com Wireless LAN Controller WX4400 provides high-bandwidth, centralized control for up to 144 directly attached managed access points (MAPs).
A. True B. False
Answer: B
QUESTION 54:
To use IEEE 802.1X Network Login for the wireless LAN (WLAN), you must configure both the 3Com access point (AP) and wireless LAN NIC for 802.1X authentication.
A. False B. True
Answer: B
QUESTION 55:
Which security protocol uses a hashed password for authentication rather than using a 3M0-600
Actualtests.com - The Power of Knowing
less secure encrypted password?
A. Extensible Authentication Protocol-Message Digest 5 (EAP-MD5) B. Wired Equivalent Privacy (WEP) C. 3Com Dynamic Security Link D. Temporal Key Integrity Protocol (TKIP)
Answer: A
QUESTION 56:
What is the process for determining the best installation design of a Wireless LAN (WLAN)?
A. Facility walk-through B. WLAN analyzer C. Site survey D. Network discovery
Answer: C
QUESTION 57:
You have launched the 3Com Wireless Infrastructure Device Manager (WIDM) software to configure your Wireless LAN Access Point 8750. When you see the access point (AP) on your PC screen, it has an exclamation point located to the left of the AP. What is the significance of the exclamation point?
A. The AP is still booting up B. The AP does not have an IP address assigned or is in a different subnet from your PC C. The AP has had a device failure and is non-operational D. The AP is configured as a Managed Access Point (MAP)
Answer: B
QUESTION 58:
Which best describes the purpose of the 3Com Wireless LAN Switch Manager (3WXM) "upload" command?
A. To perform an error check on a configuration file, then load the file from a 3Com Wireless LAN Switch/Controller to the 3WXM B. To deploy a configuration file from 3WXM to a 3Com Wireless LAN Switch/Controller C. To load a configuration file from a 3Com Wireless LAN Switch/Controller into 3WXM, perform an error check on the file and place the unit into the network plan 3M0-600
Actualtests.com - The Power of Knowing
D. To perform an error check on a configuration file, then deploy the file from 3WXM to a 3Com Wireless LAN Switch/Controller
Answer: C
QUESTION 59:
What is dynamic rate shifting on Wireless LAN (WLAN) products?
A. Wireless devices that support packet bursting to increase throughput by sending more frames per a given time period B. Automatic Turbo mode with up to 108 Mbps C. Ability to dynamically support both IEEE 802.11b and IEEE 802.11g speeds D. Wireless devices that automatically change the connection speed based on the quality of the signal
Answer: D
QUESTION 60:
What is the estimated Mbps speed achieved with an IEEE 802.11a access point at the maximum distance of 50 meters (164 feet)?
A. 12 Mbps B. 6 Mbps C. 2 Mbps D. 36 Mbps E. 54 Mbps
Answer: B
QUESTION 61:
The 3Com 11a/b/g Wireless LAN Workgroup Bridge enables a laptop, PC or printer without built-in wireless capability to connect to a wireless LAN.
A. True B. False
Answer: A
QUESTION 62:
Which three are concerns facing companies deploying Voice Wi-Fi (VoWi-Fi) network solutions? (Choose three.)
3M0-600
Actualtests.com - The Power of Knowing
A. Low level of security B. Multi-building campus environments C. Roaming from access point (AP) to AP D. Bandwidth capacity of access points (APs) E. Quality of Service (QoS)
Answer: A,C,E
QUESTION 63:
An advantage of using radio frequency (RF) signals for a Wireless LAN (WLAN) is that an RF signal can pass through any object without interference (i.e., walls, concrete, steel, etc.).
A. True B. False
Answer: B
QUESTION 64:
DRAG DROP Drag each 3Com Wireless LAN Access Point (AP) model to the set of features it supports.
3M0-600
Actualtests.com - The Power of Knowing
Answer:
QUESTION 65:
DRAG DROP Match each 3Com OfficeConnect wireless product with its description.
Answer:
QUESTION 66:
3M0-600
Actualtests.com - The Power of Knowing
Choose the three features supported by the 11g 54Mbps Wireless LAN Outdoor Building-to-Building Bridge. (Choose three.)
A. Wireless Distribution System (WDS) Bridging B. Multiple antenna options C. Weatherproof enclosure D. Built-in 18dBi directional antenna
Answer: A,C,D
QUESTION 67:
DRAG DROP Match each security protocol/standard with its description.
Answer:
3M0-600
Actualtests.com - The Power of Knowing
QUESTION 68:
How can the network administrator set the IP address and administrator password on a 3Com Access Point?
A. Type the follow CLI commands "Set IPaddress <x.x.x.x>" and "Set user <name> password <p/w>admin" B. Use the Wireless Infrastructure Device Manager (WIDM) IP command C. Use the Wireless Infrastructure Device Manager (WIDM) configure command D. Type the follow CLI command "Set user <name>password <p/w>admin"
Answer: C
QUESTION 69:
Which procedure allows the network administrator to set up a Wireless LAN Access Point (AP) 8750 to support RADIUS Authentication?
A. Use the Wireless Infrastructure Device Manager (WIDM) to choose the AP from the list, click on the "RADIUS" hyperlink and configure the RADIUS settings B. Use a web browser to navigate to the RADIUS Authentication server, click on "Configure new device," choose the AP from the list and configure the RADIUS settings C. Use the 3Com Web Configuration Management System to login to the 3Com Wireless LAN Controller/Switch, choose the AP from the list and configure the RADIUS settings D. Use the 3Com Web Configuration Management System to login to the AP, click on the "RADIUS" hyperlink and configure the RADIUS settings
Answer: D
QUESTION 70:
Which best describes the features of the 3Com Wireless LAN Switch WX1200?
A. Centrally manages/controls up to 24 Managed Access Points (MAPs), improving wireless roaming, security and management B. Centrally manages/controls up to six Managed Access Points (MAPs), improving security and management C. Centrally manages/controls up to 24 Managed Access Points (MAPs), improving security and management D. Centrally manages/controls up to 12 Managed Access Points (MAPs), improving wireless roaming, security and management E. Centrally manages/controls up to 12 Managed Access Points (MAPs), improving security and management
Answer: D 3M0-600
Actualtests.com - The Power of Knowing
QUESTION 71:
Which three are features of a Wireless Distribution System (WDS)? (Choose three.)
A. Operates only in Extended Service Set (ESS) B. Makes a wireless network a Layer 3 network C. Can bridge traffic between access points D. Uses Virtual Router Redundancy Protocol (VRRP) to manage redundant wireless paths E. Supported on the Wireless LAN Access Point 7250 and Wireless LAN Access Point 8xx0 family F. Access points must be configured with unique Service Set ID (SSID)
Answer: A,C,E
QUESTION 72:
Which parameters must be completed to set up a 3Com access point (AP) as a non-restrictive Virtual Access Point (VAP)?
A. VLAN ID and radio channels B. Service Set ID (SSID) and Wi-Fi settings C. Service Set ID (SSID) and VLAN ID D. Bridging mode and radio channels E. MAC address and Service Set ID (SSID)
Answer: C
QUESTION 73:
DRAG DROP Match each security protocol/standard with its description.
3M0-600
Actualtests.com - The Power of Knowing
Answer:
QUESTION 74:
Which command in Windows XP would you use to begin the setup process for a wireless NIC?
A. Right click the Wireless Network Connection icon and choose Configure B. Right click the Wireless Network Connection icon and choose Properties C. Right click the Wireless Network Connection icon and choose Install D. Right click the Wireless Network Connection icon and choose Load
Answer: B
QUESTION 75:
Which best describes the purpose of the Wireless LAN Switch/Controller "quickstart" command?
A. It is the command that allows the administrator to perform basic system configuration, i.e., IP address, date/time, etc. B. It is the command that first deletes any configuration on the device, then allows the administrator to perform basic system configuration, i.e., IP address, date/time, etc. C. It is the command that allows the administrator to perform advanced system configuration D. It begins the configuration process that automatically assigns the IP address and configures the device for basic operations
Answer: B
QUESTION 76:
Many access points (APs) are set up with a default configuration, known as "open system" or "open system authentication," so any station can associate and connect.
A. True B. False
Answer: A 3M0-600
Actualtests.com - The Power of Knowing
QUESTION 77:
Which three are standards/limitations when you are creating a mobility domain on the 3Com Wireless LAN Switch/Controller (WX)? (Choose three.)
A. Can define only one seed WX per mobility domain B. Each WX must have a system IP address C. Each IP address on the WX must belong to the same subnet D. Each VLAN must be locally configured on at least one WX E. Mobility domains are limited to a single IP subnet or network
Answer: A,B,D
QUESTION 78:
Which RF obstacle-planning functions are supported by the 3Com Wireless LAN Switch Manager (3WXM)?
A. Create objects that may absorb RF signals and assign each object an attenuation factor B. Assign an attenuation factor to all objects from an imported GIF floor plan C. Assign an attenuation factor to all objects from an imported J PEG floor plan D. Remove unnecessary layers from imported J PEG floor plans
Answer: A
QUESTION 79:
Which 3Com Web Configuration Management System Advanced Settings software screen allows the network administrator to configure the authentication, encryption and key management parameters for an access point (AP)?
A. Wi-Fi settings B. WEP settings C. Radio settings D. Security settings
Answer: D
QUESTION 80:
What is required before the network administer can connect to a 3Com Wireless LAN Switch/Controller via telnet?
A. Create a user/password on the device and set the console port authentication B. Enable privilege mode, create a user/password on the device and set the console port 3M0-600
Actualtests.com - The Power of Knowing
authentication C. Assign a master password to the device and set the console port authentication D. Enable telnet services, create an admin user/password on the device and assign the device an IP address
Answer: D
QUESTION 81:
What is the #1 concern for Wireless LAN (WLAN) enterprise customers?
A. Network bandwidth capacity B. Wireless coverage C. Management D. Security
Answer: D
QUESTION 82:
Which three are 3Com Wireless LAN Switch Manager (3WXM) network planning functions? (Choose three.)
A. Generate a work order B. Define the RF model and the coverage areas for the floor C. Define the connection speeds for wired devices on a floor D. Launch countermeasures against rogue access points E. Define the geographical area for the wireless network
Answer: A,B,E
QUESTION 83:
Which 5 GHz IEEE 802.11 WLAN band is best suited for building-to-building wireless communications?
A. 5.0 - 5.1 GHz B. 5.3 GHz C. 5.7 - 5.8 GHz D. 5.2 GHz
Answer: C
QUESTION 84:
Which best describes the information provided with the 3Com Wireless LAN Switch 3M0-600
Actualtests.com - The Power of Knowing
Manager (3WXM) work order?
A. Information for the physical installation of Managed Access Points (MAPs) B. Information for the physical installation of Managed Access Points (MAPs), 3Com Wireless LAN Controller/Switch initial setup configuration information and projected RSSI information of the 3Com Wireless LAN Mobility System C. Information for the physical installation of the 3Com Wireless LAN Mobility System D. Information for the physical installation and software parameters, i.e., IP addresses, VLANs, channel assignments, etc., of Managed Access Points (MAPs)
Answer: B
QUESTION 85:
What is displayed by the 3Com Launcher/3Com Wireless LAN Manager if the antenna is retracted on a 3Com 11a/b/g Wireless PC Card with XJ ACK Antenna?
A. A picture with a green line connecting the PC and AP B. A picture with a yellow line connecting the PC and AP C. A picture with a red line connecting the PC and AP D. A picture with multiple curved lines showing the single strength between the PC and AP
Answer: C
QUESTION 86:
Which three Wireless LAN Access Point 8750 parameters are set using the 3Com Web Configuration Management System "Advanced Setup Radio Setting" window? (Choose three.)
A. IP address and subnet mask B. VLAN IDs C. Maximum number of client associations D. Device name and type E. Administrator password F. Service Set ID (SSID)
Answer: B,C,E,F
QUESTION 87:
What does the IEEE 802.11d standard specify?
A. Defines MAC-based Quality of Service (QoS) mechanism B. Defines encryption using the Advanced Encryption Standard (AES) 3M0-600
Actualtests.com - The Power of Knowing
C. Defines the ability to fine tune Wireless LAN configuration at the Physical (PHY) Layer to comply with country-specific rules D. Defines Inter Access Point Protocol (IAPP)
Answer: C
QUESTION 88:
DRAG DROP Match each 3Com OfficeConnect wireless client product with its features.
Answer:
QUESTION 89:
DRAG DROP Match each 3Com Wireless Switch (WX) IP service with its description. 3M0-600
Actualtests.com - The Power of Knowing
Answer:
QUESTION 90:
Which wireless building-to-building bridge distance-related parameter must be set to ensure each wireless bridge waits the appropriate period for a response from other wireless bridges?
A. Acknowledgement Delay Timeout (ACK) B. Request to Send/Clear to Send (RTS/CTS) C. Broadcast Service Set Identifier (SSID) 3M0-600