Professional Documents
Culture Documents
Grundfos Data Sheet: Integrated Protection
Grundfos Data Sheet: Integrated Protection
Grundfos Data Sheet: Integrated Protection
SB
Integrated protection The pump incorporates thermal overload protection. Floating suction strainer The model with floating suction strainer always draws the water from just below the water surface where the water is clean and free from solid particles.
TM04 7171 1710 - TM04 7172 1710
Performance range
H [m] 45 40 35 30 25 20 15 10 5 0 0 20 40 60 80 100 120 Q [l/min]
TM04 7169 1710
3-45 3-35
50 Hz
SB
Fig. 1 SB pumps
Product description
The SB pump is a submersible booster pump for the pumping of clean water. It is especially suitable for rainwater applications. The pump is available in two main versions: with integrated suction strainer (1 mm mesh) with side inlet which includes a flexible suction hose with floating suction strainer (1 mm mesh). In both versions, the pump is available with or without float switch. The float switch can be used for automatic operation or dry-running protection of the pump. The pump can be identified from the table below:
Pump version Integrated suction strainer with float switch Integrated suction strainer without float switch Side inlet with float switch Side inlet without float switch Model A M AW MW
3-25
Selection guide
General recommendation If the distance from the tank wall to the pump is above 1.5 metres, the model with side inlet should be selected. If the distance from the tank wall to the pump is less than 1.5 metres, the model with suction strainer should be selected. Pump sizes recommended for the most typical applications:
Application Garden watering One-storey house: For toilet flushing, washing machine, car washing and garden watering Two-storey house: For toilet flushing, washing machine, car washing and garden watering Recommended pump SB 3-25 SB 3-35
SB 3-45
Being responsible is our foundation Thinking ahead makes it possible Innovation is the essence
Construction
Component Cover Impeller Chamber Shaft with rotor Wetted part of shaft Strainer1) Inlet collar2) Cable O-rings Pump housing Base Material Polypropylene (PP30GF) Polypropylene (PPO20GF) Polypropylene (PPO20GF) Stainless steel (EN 1.4401/AISI 416) Stainless steel (EN 1.4301/AISI 304) Stainless steel (EN 1.4301/AISI 304) Stainless steel (EN 1.4301/AISI 304) Neoprene H07RN-F NBR Polypropylene (PP30GF) Polypropylene (PP30GF) Stainless steel (EN 1.4301/AISI 304)
Electrical data
Supply voltage: 1 x 220-240 V, 50 Hz. Insulation class: IP68. Enclosure class: B.
Pump type SB 3-25 SB 3-35 SB 3-45 Voltage [V] 1 x 240 1 x 240 1 x 240 Frequency [Hz] 50 50 50 P1 [kW] 0.57 0.80 1.05 I 1/1 [A] 2.8 3.8 4.8 n [min-1] 2800 2800 2800
Stator housing
1) 2)
Only fitted on models with integrated suction strainer. Only fitted on models with floating suction strainer.
Approvals
The SB pump has the following approvals: GOST (Russia) UL/CSA C-tick.
97699316
ECM: 1062531
0610
GB
Subject to alterations.
The name Grundfos, the Grundfos logo, and the payoff BeThinkInnovate are registrated trademarks owned by Grundfos Management A/S or Grundfos A/S, Denmark. All rights reserved worldwide.