Professional Documents
Culture Documents
Pedersen Rifle
Pedersen Rifle
Used by
Designer Designed
Cartridge Action
Feed system
The Pedersen Rifle, officially known in final form as the T1E3 rifle, was a United States semiautomatic rifle designed by John Pedersen that was made in small numbers for testing by the United States Army during the 1920s as part of a program to standardize and adopt a replacement for the M1903 Springfield rifle. Although the Pedersen was rated for a time as the most likely candidate for standardization and adoption, the .30 caliber M1 Garand rifle was chosen instead.[1]
Contents
1 Background 2 Proposals 3 Development of the rifle and cartridge 4 Testing and evaluation 5 Further tests and a final decision 6 Foreign interest 7 Legacy 8 Description and operation 9 Serial numbers (U.S. rifles) 10 See also 11 Notes 12 References 13 External links
[edit] Background
The U.S. Army had shown interest in the idea of self-loading (semiautomatic) rifles before World War I. Combat experience during that war had made clear two general points: that the standard caliber .30-06 rifle cartridge was excessively powerful for the ranges (500 yards and less) where infantry combat was likely to take place, and that bolt-action rifles such as the M1903 Springfield were seriously lacking in firepower and second-shot hit capability. The U.S. Army Ordnance Bureau had no problem in soliciting designs and prototype weapons from inventors, and sought to facilitate their work by supplying barrels and other hardware that the inventors were likely not to be able to fabricate. However, such a traditional way of developing new weapons all too often saw potentially worthwhile designs wash out of the testing process due to a lack of engineering skills and experience both in the design and manufacturing phases. Testing in the early 1920s led the Ordnance Bureau to identify three rifle designs - the Bang rifle, the Thompson Autorifle, and the primer-protrusion actuated Garand rifle - as promising candidates. However, all three designs were burdened with the high pressure and heat generating
characteristics of the .30-06 ammunition, which looked likely to result in a weapon too heavy and too subject to overheating to be worthwhile. Trials with a small number of "militarized" .25 caliber Remington autoloading rifles, despite their unsuitability for combat, provided a body of practical experience with semiautomatic rifles and an appreciation for the idea less powerful ammunition might be a critical part of the successful development of such weapons.
[edit] Proposals
At this point in time, John Douglas Pedersen made an unsolicited proposal to the Army Ordnance Bureau which would have a profound impact on the entire effort to develop a serviceable semiautomatic rifle. In essence, he proposed to develop a rifle that would be neither recoil operated (excessive recoil and inaccurate) nor gas operated (complexity, weight, and potentially undesirable operating characteristics). Additionally, he proposed to develop a new cartridge in the caliber .256 to .276 (6.5 mm to 7 mm) range that, while less powerful that the .30-06, would be effective out to 300 yards. Pedersen had gained a good reputation as both a firearms designer and production engineer at the Remington Arms Company. While at Remington, he designed four notable commercial firearms. Pedersen also designed the Pedersen Device during World War I. This was a sub-firearm intended to allow battlefield conversion of Springfield and M1917 Enfield rifles into semiautomatic rifles firing a pistol-sized cartridge.[1] The Bureau of Ordnance was sufficiently impressed that in 1923 it granted Mr. Pedersen a contract providing office space, a project budget, an annual salary, and in compensation for his departure from Remington the right to patent his work and collect royalties from the U.S. Government if his rifle was adopted.
gas operation (as in the Browning Automatic Rifle). To ease extraction, cartridge cases were coated in mineral wax.[3] This left a thin film that was hard, and durable, and was not sticky,.[4] The waxed cases solved the issue of difficult extraction, but hindered acceptance of the Pedersen rifle because officials feared that the wax would attract dirt and cause operating failures.
the T3 was rated superior to the T1E3. Specific T1E3 defects were: failure of the breech mechanism to close, misfires, breech mechanism override (failure to feed), and breakage of a crank and a sear bar. The Board recommended manufacturing of 20 T3 rifles for service test, and in addition recommended building a caliber .30-'06 version of the T3 for evaluation. Cartridge lethality was again investigated by the Goat Board, this time with shooting tests on anaesthetized goats and careful measurement of entry and exit velocities. However, the test results again demonstrated no superiority of caliber .30 ammunition at normal combat ranges. The year 1931 saw testing of the T1E3 and the twenty T3E2 rifles by the Infantry. The Infantry Board rated the T3E2 superior in effective fire power and simplicity of construction (the T3E2 had 60 parts, while the T1E3 had 99 parts). This Board, which three years earlier had recommended adoption of the T1, now favored the T3E2; it continued to favor the .276. However, the Chief of Infantry broke with the Infantry Board and stated a preference for .30 caliber. The .30-'06 Garand rifle (essentially an enlarged T3E2) was quickly built and, under the confusing designation T1E1, was tested along with the T3E2 and the Pedersen T1E3 during the remainder of 1931. The Semiautomatic Rifle Board now exhibited a notably critical attitude toward the T1E3. The Board found fault with the requirement for lubricated cartridge cases (seemingly regardless of the technical merits of Mr. Pedersens case treatment concept), poor trigger pull, and the upward break of the breech mechanism. A more substantive complaint had to do with the complete exposure of the breech mechanism when held openthe Board correctly cited the vulnerability of the rifle to mud and dust while in this condition. The Board also reported slam-fires (the Garand T3E2 was reported to dimple cartridge primers with its firing pin, but did not slam-fire). In the end, funding issues forced a decision. Faced with the possible loss of funds already authorized by Congress, the Board met for one more time in January 1932 and decided to recommend approval of the T3E2 (the .276 Garand) for limited procurement by the Army and to continue development of the T1E1 (the .30-'06 Garand). With this action, the Pedersen rifle was effectively dropped from consideration. In four more years, almost to the day, an improved version of rifle T1E1 would be adopted as the M1. As Springfield Armory tooled for and refined the Garand, Pedersen continued to work on another rifle. He developed a .30 caliber model with a conventional gas-trap piston and multipiece operating rod system. He fought to have it tested by the U.S. Army prior to World War II. At around the same time, serious difficulties were being encountered with the Garand and questions had been raised. Both Pedersen and Melvin M. Johnson, Jr. attempted to capitalize on the troubles. Based on serial numbers, it is thought up to 12 prototype gas-trap Pedersen rifles were made. One example of the model G-Y resides at the Springfield Armory Museum.[6]
This section may contain original research. Please improve it by verifying the claims made and adding references. Statements consisting only of original research may be removed. More details may be available on the talk page. (October 2010) Publicity of the U.S. Army's serious consideration of adopting the Pedersen rifle as standard issue generated similar interest in the rifle in the United Kingdom. Pedersen traveled to the UK in 1930 to oversee tooling up of a production facility by Vickers-Armstrong for manufacturing of rifles for test by the UK Government and for possible marketing to other countries. The UK tested the rifle in 1932 along with other prototype semiautomatic rifles, but decided not to take any further action. Vickers apparently both manufactured the rifle in small quantities and also further developed the design. A caliber .276 Vickers-Pedersen rifle offered for sale in March 2008 by the James D. Julia Auction firm was serial numbered 95, and the clip that accompanied the rifle was of a curved and symmetrical design (suitable for loading into the magazine either end up). The butt stock had a noticeably different shape than those of rifles made at Springfield Armory, but otherwise the rifle was identical to the U.S. production T1E3 and thus incorporated the design revisions covered by U.S. Patent 1,866,722 to make his rifle more modular in construction and thus easier to disassemble and maintain. Pedersen reportedly then went to Japan to encourage interest in his rifle by the Imperial Japanese Army, which led to the reported building of 12 rifles and 12 carbines for testing around 1935; the project reportedly was abandoned in 1936. These weapons were apparently made to fire the standard 6.5 mm Japanese service cartridge, and incorporated design changes which radically changed the appearance of this rifle when compared to the original T1E3 rifle. Most notable was the use of a spool-type Schoenauer magazine which formed a very pronounced swell in the stock just ahead of the trigger guard. A receiver-mounted safety lever and a stripper clip guide at the front of the breech block head are also noticeable features. A ventilated wooden handguard completely covers the barrel, while the stock furniture more resembles that of the later Type 99 rifle than the then-standard Type 38. The sights are offset to the left, although the cycling of the breech block mechanism would still momentarily interrupt the line of sight. The hinge pin was also made removable. Reportedly the Japanese Army did not really grasp the importance of case lubrication for this type of rifle, so the test rifles never really functioned satisfactorily. A carbine version, serial number 5, has been recently described in some detail. A photo of a field stripped rifle or carbine, reportedly of a specimen found in Japan at the end of World War II, has been reproduced in Hatchers The Book of the Garand and some other gun books.[citation needed]
[edit] Legacy
While the Pedersen rifle never achieved the status of a standard-issue weapon of the U.S. Army, the rifle did have a visible impact on the process by which the ultimate winnerthe M1 Garand riflewas selected. John Pedersens work in creating and improving his rifle was a coherent research and development process which significantly raised the bar for those trying to get a hearing from Army Ordnance regarding their designs. Significantly, the only serious competition that the Pedersen rifle had in the end was the rifle created by John C. Garandlike Pedersen, a talented designer and engineer with a solid grounding in the particulars of production tooling.
The initial success and ultimate failure of the Pedersen rifle has sometimes been interpreted as the simple workings-out of biased or overly conservative decision-making in the face of technological innovation. However, there is little in the historical record to support such interpretations. Simply put, the Pedersen rifle had shortcomings. The rifle was complex, making concerns about mass production to an exacting standard of parts interchangeability quite legitimate. Issues revealed in Army tests were serious and inherent in the design. Certainly the concerns expressed by the Semiautomatic Rifle Board regarding the vulnerability of the operating mechanism to sand and mud when held open were very real. However, what the rifle did succeed in demonstrating was that a semiautomatic combat rifle was a realistic proposition. The initial enthusiasm of the Infantry Board for the adoption of this rifle is certainly strong testimony on this point. Bias is certainly visible in the negative attitude taken toward what was unquestionably the most innovative aspect of the rifles development: the lubrication of the cartridge cases with Pedersens dry wax process. The implicit equation of this process with the messy and contamination-vulnerable case oiling system used in the Thompson Rifle (also a hesitation blowback design) certainly shows a degree of obstinate conservatism. This concept may yet have potential application in firearms development even now, but it was certainly not appreciated or even liked back in the 1920s. Some writers have implied that the Pedersen rifle was effectively killed by Chief of Staff Douglas MacArthurs decision to require use of the .30-06 cartridge for the standard semiautomatic rifle. However, the record does not support such an interpretation. The Pedersen rifle was rejected a month before Gen. MacArthur pronounced on the subject, at a point in time when the caliber .276 T3E2 Garand rifle was the clear winner of the competition and ready for initial production. History shows MacArthur vetoed the .276 Pederson cartridge for use in the Garand rifle.[1]
receiver, was a protected peep sight of original design adjustable for windage and elevation. The receiver was entirely open on top between the barrel ring and the rear sight mount. The stubby, flat operating handle for the toggle joint breech mechanism protruded to the right from the forward part of the crank (the rearmost part of the breech mechanism). The breech block mechanism was made in three parts. From front to rear they were: 1. The breech block head; this part actually supported the cartridge base. 2. The body; this was linked to Number 1 and Number 3. 3. The crank; this was secured to the rear of the receiver with the hinge pin. The Pedersen rifle operated on the hesitation blowback principle: energy released by firing a cartridge immediately caused the breech to start moving rearward, but mechanical leverage built into the mechanism caused the actual opening of the breech to be delayed long enough so that pressure within the barrel would fall to a safe level. This was achieved with a bearing surface machined onto the front end of the crank. As the case head pressed on the breech block head and forced it to move rearward (as guided by contact surfaces in the receiver), pressure was exerted on the body, which in turn exerted pressure on the crank. The crank had contact surfaces on its rear end which would transmit pressure to corresponding surfaces in the rear of the receiver, thus relieving the hinge pin of excessive stress. As the rear surface of the body continued to exert pressure on the bearing surface on the front of the crank, the leverage exerted would cause the crank to move about 95 degrees upward from the horizontal on the fulcrum formed by it being attached to the rear of the receiver by the hinge pin. The breech block mechanism thus operated in a manner resembling the operation of the Luger pistol, but unlike that pistol the Pedersen mechanism was at no time mechanically locked. The operating principle was actually the same as that used in the Model 07/12 Schwarzlose machine gun used by Austria-Hungary during the First World War. As with all hesitation blowback weapons, the Pedersen rifle had to have some means to prevent cartridge cases from becoming stuck in the chamber due to the relatively high breech pressure and operating velocity existing at the moment of extraction. The measure adopted by the designer was the sophisticated case coating technique described earlier, which in combination with the taper of the cartridge case sides undoubtedly contributed to the high degree of reliability noted in all Army tests. It should be noted that use of uncoated-case rounds (intentionally done in at least one test) caused the rifle to completely fail to function. Starting with the rifle unloaded and the breech mechanism closed, the loading and operating cycle would be as follows. 1. Grasping the operating handle with the right hand, the operator would pull the crank up and back until vertical, at which point the hold open device would engage the underside of the breech block head. The breech return spring, entirely housed within the crank, would at this point be fully compressed. 2. An asymmetrical spring steel clip of ten rounds in a double-staggered column would then be inserted, feed end up, into the magazine against the spring pressure of the magazine follower; when fully inserted the clip would be caught and held by a catch. (Note: this
clip, like the clip used in the Austrian Model 95 rifle, could only be inserted one way and thus could potentially cause confusion under the stress of combat). Unloading the magazine would be done by (if necessary) retracting and holding open the breech mechanism, then pushing the trigger forward from its neutral position; the clip and any remaining cartridges would be ejected upward. 3. By pulling back slightly on the operating handle, the operator would then free the breech block head from the hold open device and under pressure from the operating spring the breech block mechanism would straighten, driving the breech block head forward to push the topmost cartridge forward from under the feed lips of the clip, chambering the cartridge, and engaging the extraction groove around the base of the cartridge with the extractor. The extractor and the spring-loaded plunger type ejector were both built into breech block head. If the rifle was not immediately to be fired, the spring-loaded striker assembly (housed within the breech block head and body) could be locked by pushing the cross-bolt safety located in the breech body from right to left; this would also lock the breech block mechanism so that it could not be opened. (Army test reports identified the safety and the firing mechanism as weak areas of the T1 rifle: the safety, when applied, prevented clearing a loaded chamber and did not lock the trigger mechanism; the safety was also subject to damage. The striker was reported to have become stuck on some occasions, causing slam-fires). 4. With the rifle ready to fire, pressing the trigger would cause movement of a connector bar extending forward toward the magazine well; the connector bar movement would then cause the sear to move out of engagement with the striker and cause the chambered round to fire. (In common with bullpup rifles, which also separate the trigger from the firing mechanism, the T1 was reported to suffer from a relatively poor trigger pull feel; during at least one series of tests the connector bar broke). When the breech block mechanism cycled, the crank would momentarily block the line of sight (Army riflemen testing this rifle apparently got used to this effect quickly, but there were negative comments in the test reports regarding the crank striking the edge of the Brodie helmet then standard issue in the U.S. Army as well as damaging the brims of the felt campaign hats then worn as part of the field uniform). 5. When the last round in the clip was chambered and then fired, final upward movement of the magazine follower would engage the hold open device, which would catch and hold the breech block head in the open position; the empty clip would be ejected upward. The breech block mechanism could be released by depressing the follower and pulling back slightly on the operating handle. (The T1 and the Cal .276 Garand both had a tendency to hold open their actions and eject clips while one round still remained in the magazine). Basic field stripping of the T1 rifle was simple: with the rifle unloaded and the mechanism held open, pressing on a stud on the underside of the crank would lock the breech return spring. The breech block head could then be guided up and out through inclined guide ways in the receiver and the crank then could be freed from the hinge pin, allowing the entire breech mechanism to be removed as a unit. The magazine housing would then be dismounted by pressing forward on the housing until the forward retaining lip would become free from the groove in the forward part of the receiver that it normally rested in and then rotating the housing downward. The entire trigger and feed mechanism group would then be removed by pressing a spring-loaded cross bolt at the rear of the trigger guard just below the stock; the entire assembly would then be freed to be
pulled down and rearward to separate it from the receiver and stock. The general concept of the field stripping process is similar to that of the SKS carbine. The stock and barrel-receiver assembly would normally not be separated, following the pattern of rifles such as the German Model 98 Mauser or the Model 1903 Springfield.
Luger P08 pistol Borchart pistol List of individual weapons of the U.S. Armed Forces
[edit] Notes
1. ^ a b c d Canfield, Bruce. "Garand vs. Pederson," American Rifleman, July 2009. 2. ^ Illustrated Encyclopedia of 20th Century Weapons and Warfare (London: Phoebus, 1978), Volume 19, p.2092, "Pederson". 3. ^ Hatcher, Julian. (1947). Hatcher's Notebook. The Military Service Press Company. ISBN 08117-0795-4 p. 38-44 4. ^ Hatcher, The Book of the Garand, p.69. 5. ^ Hatcher, p.72. 6. ^ Springfield Armory Collection
[edit] References
Hatcher, Julian S.. The Book of the Garand; 1948 (reprint edition 2000). The Gun Room Press. ISBN 0-88227-014-1
Manual Covering Operation of the Pederson Rifle Japanese Pedersen Semi Auto Rifles & Carbines An article on the adoption of the M1 Garand over the Pederson Rifle.
I am highly knowledgeable about this topic (optional) Submit ratings Saved successfully Your ratings have not been submitted yet Categories: Semi-automatic rifles
Hidden categories:
Articles that may contain original research from October 2010 All articles that may contain original research All articles with unsourced statements Articles with unsourced statements from October 2010
Personal tools
Namespaces
Article Discussion
Variants Views
Actions Search
Special:Search Search
Navigation
Main page Contents Featured content Current events Random article Donate to Wikipedia
Interaction
Toolbox
What links here Related changes Upload file Special pages Permanent link Cite this page Rate this page
Print/export
Languages
This page was last modified on 21 October 2011 at 02:13. Text is available under the Creative Commons Attribution-ShareAlike License; additional terms may apply. See Terms of use for details. Wikipedia is a registered trademark of the Wikimedia Foundation, Inc., a non-profit organization. Contact us Privacy policy About Wikipedia Disclaimers Mobile view