Professional Documents
Culture Documents
Insulated Precast Concrete PDF Brochure v1
Insulated Precast Concrete PDF Brochure v1
wall construction.
Once dried (24-48 hours) can be finished with paint, plaster, stucco, drywall, stone, tile your choice of finish
Specifications
Length: Variable Meshes: 20 cm x 20 cm Mesh top: 4 mm Calibre Mesh bottom: Gauge 6-8 mm Steel: f'y = 5000 kg/m2 Aislafom Dead weight: 1-4 kg / m Separation mesh: 6cm onwards Polystyrene: 8 to 20 cm. Ribs:. Spaced 20 cm Width: 1.20 mt. Weight over 0.13 to 0.22 T / m Total thickness: 12 to 23 cm.
Info@PlayaCasaEcuador.com www.PlayaCasaEcuador.com
The Losatec floor/ceiling panel is the main element that makes up the ultimate system for building roofs and floors of reinforced concrete. It consists of a folder consisting of expanded polystyrene foam panels (aislafom ) ranging in size from 8 to 20 cm in thickness with 2 to 15 channels of 5 cm wide galvanized steel mesh running in both directions. Galvanized steel mesh of 20 x 20 cm are pre-welded together before adding the styrofoam.
By joining several losatec panels with the compression layers of concrete and reinforcing steel forms a concrete slab mixed lattice composed of the three-dimensional mesh and ribs in both directions of 20 x 20 cm base.
Losatec panels can be used as any type of wall and when integrated with the compression layer of concrete slab form a solid, monolithic, lightweight thermo-acoustic insulation and resistant.
Info@PlayaCasaEcuador.com www.PlayaCasaEcuador.com
Product Overview. Aislalosa panels are manufactured building materials with expanded polystyrene foam wrapped and embedded with galvanized steel wire then sized to work in the construction systems of prestressed girder or semi-beams, used in the construction of roof slabs and mezzanines providing lightness, great structural strength, achieving lower costs and construction time than traditional solid slabs.
Info@PlayaCasaEcuador.com www.PlayaCasaEcuador.com
Beam
Slab formwork
Shoring beams
Column formwork
Info@PlayaCasaEcuador.com www.PlayaCasaEcuador.com
Curing process with mezzanine or roof slab use of losatec IMPORTANT - The concrete compression layer should be 3 to 4 cm thick concrete and f'c = 200 kg/m2 or more.
The aislafom is expanded to form a substantially closed cell structure. When considering the fire behavior of any building material is important to consider that the assessment should be based on its performance in end-use conditions. This behavior depends not only on the chemical nature of the material but largely on your fitness.
The aislafom is manufactured as flame retardants modified, expanded metal making it much more difficult to burn and significantly reducing the rates of flame propagation. Remember: Each panel and flooring slab are covered in wet cement and allowed to dry to a hard shell. It is very difficult to burn cement.
The aislafom is self-extinguishing, meaning that by itself does not increase or sustain the fire, thermal insulation properties, has excellent acoustic properties and is 100% recyclable.
Losatec allows us to make optimal use of concrete, and there was nothing wasted it. Likewise the properties of expanded polystyrene (aislafom ), enable the setting of the concrete significantly improves, therefore, the mixture does not leak during the curing cycle by its waterproof condition
The aislafom is the most effective insulating thermoplastic material for use in construction since it consists of small independent cells (3 to 6 million cells in 1 cm ) containing air. Thus, offers great resistance to the passage of heat.
After stripping the bottom of the losatec can be pasted or coated with plaster, stucco, drywall or painted to the taste and discretion of the builder or owner getting the desired finish.
Info@PlayaCasaEcuador.com www.PlayaCasaEcuador.com
Info@PlayaCasaEcuador.com www.PlayaCasaEcuador.com
Wet cement is applied to inside and outside of walls about 1 thick Design advantages The following list presents the advantages of this material over the brick and block. Can be finished with paint, plaster, stucco, drywall, stone, tile your choice of finish
Lightweight construction by the reduction in dead load by 50% as compared to wall traditional systems. Lightness in portability, maneuverable loading, unloading and handling. High strength / weight ratio to absolve earthquakes. High Thermal resistance for energy savings and housing. Allows auto construction using conventional tools. Flexibility in floor plans. Compatibility and adaptability to traditional building materials. Easy to hide electric and water production. Speedy construction and remarkably advantageous in the series production. No or minimal use of columns, support beams due to the monolithic nature of the construction Flexible architectural cutouts on doors, windows, skylights, corner and volumes. Uses minimal installation accessories. (no need for special tools)
Info@PlayaCasaEcuador.com www.PlayaCasaEcuador.com
Building stairs.
The lightweight concrete staircase to the building is stilt houses as follows:
Formwork is placed first on the struts that bear the cast concrete.
You only need 3 points with 2 supporting rods or struts each, due to the light weight of the ladder.
The staircase kit includes: Galvanized steel mesh encased styrofoam blocks Expanded polystyrene filler Railing with metal
Info@PlayaCasaEcuador.com www.PlayaCasaEcuador.com
Info@PlayaCasaEcuador.com www.PlayaCasaEcuador.com
Info@PlayaCasaEcuador.com www.PlayaCasaEcuador.com
Info@PlayaCasaEcuador.com www.PlayaCasaEcuador.com
Info@PlayaCasaEcuador.com www.PlayaCasaEcuador.com