Professional Documents
Culture Documents
Volume - III
Volume - III
Volume - III
of India Enterprise)
MIZORAM UNIVERSITY
In figures 1CIVIL WORKS 1.1 As per DSR 2007 a) b) Excluding subhead steel items Subhead steel items 1.2 Non DSR Items 37170522.69 22332047.90 12303702.00
In words
In figures
In words
2-
SANITARY & PLUMBING WORKS 2.1 As per DSR 2007 2.2 Non DSR Items 2890340.85 1699032.06
3-
ELECTRICAL WORKS 3.1 As per DSR 2007 3.2 Non DSR Items 3087759.00 8732894.00
4-
FIRE FIGHTING & FIRE ALARM WORKS 4.1 As per DSR 2007 4.2 Non DSR Items 0.00 1091458.00 TENDER VALUE
CIVIL WORKS
(Page No. 1 to 20)
SUB TOTAL
12 TOTAL OF SUB HEAD - 6 (STEEL WORKS, Reinft.steel, grills etc)
37170522.69
22332047.90
12303702.00
0.00
GRAND TOTAL
59502570.59
12303702.00
BOQ
ABST CIVIL
Amount (Rs.)
DSR items NS items
Unit
Qty
DSR
NS
2.6.1 2.8
cum
9363
101.85
953621.55
1.2
cum cum
50 2967
103.40 18.90
5170.00 56076.30
cum
7283
45.70
332833.10
1.5
litre
1130
174.30
196959.00
1.6
(a) NS 1.7
sqm cum
1695 50
76.20 414.00
1673818.95
BOQ
CIVIL
Amount (Rs.)
DSR items NS items
Unit
Qty
DSR
NS
a) b) c)
10 187 165
0.00
BOQ
CIVIL
Amount (Rs.)
DSR items NS items
Unit
Qty
DSR
NS
sqm
165
7867.20
5.9.15
sqm
240
119.25
28620.00
5.11
3.2
Suspended floors, roofs,landing,beams and balconies (Plan area to be measured) sqm Add or deduct for plaster drip course/groove in plastered surface or moulding to R.C.C. projections. metre Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including pumping of concrete to site of laying but excluding the cost of centring, shuttering, finishing and reinforcement. including Admixtures in recommended proportions. as per IS 9103 to accelerate, retard setting of concrete improve workability without impairing strength and durability as per direction of Engineer-inCharge - M-25 grade reinforced cement concrete by using 410kg.of cement per cumof concrete.All works upto floor V level. cum
3165 520
106.20 11.95
336123.00 6214.00
3800
4147.40
15760120.00
BOQ
CIVIL
Amount (Rs.)
DSR items NS items
Unit
Qty
DSR
NS
metre metre
725 25
2785.00 250.00
2019125.00 6250.00
NS
sqm sqm
195 10
925.00 225.00
180375.00 2250.00
metre
25
276.80
6920.00
3.8
22.4.1
metre
85
386.75
32873.75 20190886.45
2208000.00
BOQ
CIVIL
Amount (Rs.)
DSR items NS items
Unit
Qty
DSR
NS
7481040.00
BOQ
CIVIL
Amount (Rs.)
DSR items NS items
Unit
Qty
DSR
NS
276077.00
5.2
504
61.50
30996.00
9.21.1 9.23
a) 5.4
sqm
320
929.95
297584.00
sqm
320
284.55
91056.00
9.97
5.5
each each
380 485
52.00 32.15
19760.00 15592.75
a) b) 5.7
each each
112 533
48.80 28.35
5465.60 15110.55
9.101.2 9.96
a) 5.8
each
134
53.90
7222.60
9.96.1
BOQ 7
each
50
158.50
7925.00
CIVIL
Amount (Rs.)
DSR items NS items
9.67 9.67.2
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of Brass handles with necessary screws etc. complete (Best make of approved quality) 5.10 Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS: 363 with necessary screws etc. complete. 5.10.1 115 mm TOTAL OF SUB-HEAD-5
each
34
332.65
11310.10
each
48
10.95
525.60 778625.20
0.00
BOQ
CIVIL
Amount (Rs.)
DSR items NS items
Unit
Qty
DSR
NS
21136500.00
kg
9200
64.40
592480.00
187
81.20
15184.40
kg
10350
46.35
479722.50
10.25
6.5
10.25.2 10.5
6.5.1 6.6
kg
1800
51.20
92160.00
10.5.2
a)
sqm
10
1600.10
16001.00 22332047.90
0.00
BOQ
CIVIL
Amount (Rs.)
DSR items NS items
Unit
Qty
DSR
NS
sqm
2820
694.40
1958208.00
11.27
7.4
11.37
7.8
NS
7.9
sqm Extra for pre finished nosing in treads of steps of kota stone / sand stone slab. metre Extra for kota stone/sand stone in treads of steps and risers using single .length up to 1.05 metre. sqm Providing and fixing 1st quality Ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours,shades,design and prints except begundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick Cement Mortar 1:3 (1 Cement :3 Coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade etc. complete. sqm Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown laid on 20mm thick bed of Cement Mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement and matching pigments etc., complete. sqm Providing and layingVitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorptions less than 1% and flexural strength not less than 30N/mm 2, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigments etc.complete. sqm Size of Tile 60 x 60 cm TOTAL OF SUB-HEAD-7
2385
556.60
1327491.00
1285
598.65
769265.25
391
1519.00 4415594.20
593929.00 593929.00
BOQ
10
CIVIL
Amount (Rs.)
DSR items NS items
Unit
Qty
DSR
NS
each
10
108.00
1080.00
22.7
8.2
sqm
615
536.40
329886.00
CIVIL
BOQ
11
Amount (Rs.)
DSR items NS items
Unit
Qty
DSR
NS
46751.25
12.50
8.4
1500
440.65
660975.00
12.51
8.5
12.51.2 12.51.6
45 155
448.15 547.80
0.00
BOQ
12
CIVIL
Amount (Rs.)
DSR items NS items
Unit
Qty
DSR
NS
1:4 (1 cement : 4 fine sand) sqm Extra for providing and mixing water proofing material in cement plaster per bag work in proportion recommended by the manufacturers. of 50kg. Cement used in the mix. White washing with lime to give an even shade: New work (three or more coats) Distempring with oil bound washable distemper of approved brand and manufacture to give an even shade: New work( two or more coats) over and including priming coat with cement primer. Finishing walls with Premium Acrylic Smooth exterior paint with Silicon additives of required shade New work (Two or more coats applied @ 1.43 ltr/10 sqm. over and including base coat of water proofing cement paint applied @ 2.20 kg/10 sqm) Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. Applying a priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) With ready mixed red oxiide zinc chromate primer of approved brand and manufacture on steel work (second coat) TOTAL OF SUB-HEAD-9
15 13.37 13.37.1 13.41 13.41.1 13.47 13.47.1 9.6 a) 9.7 a) 9.8 9.8.1 sqm 4160
28.85 6.75
432.75 28080.00
sqm
7947
41.55
330197.85
sqm
6390
60.10
384039.00
9.9 a) 9.10 a) b)
sqm
2185
51.30
112090.50
sqm sqm
765 1420
16.55 7.15
0.00
BOQ
13
CIVIL
Amount (Rs.)
DSR items NS items
a)
kg
1805
290.45
524262.25
b)
kg
3565
310.45
1106754.25
a) b) 10.3
sqm sqm
145.00 785
554.95 673.55
80467.75 528736.75
sqm
75
1684.10
126307.50
BOQ
14
CIVIL
Amount (Rs.)
DSR items NS items
Unit
Qty
DSR
NS
kg
40
305.75
12230.00 2378758.50
0.00
BOQ
15
CIVIL
Amount (Rs.)
DSR items NS items
8.10.2 NS
a) 11.2
LS 4.17 11.3
243000.00
243000.00
sq.m
300
222.65
66795.00
NS
11.4
sqm NS 11.5
80
11677.00
934160.00
No
15
5063.00
75945.00
BOQ
16
CIVIL
Amount (Rs.)
DSR items NS items
Providing and fixing 18mm thick gang saw cut mirror polished(premoulded and prepolished) machine cut for kitchen platforms,vanity counters facias and similar locations of size of approved shade,colour and texture laid over 20mm thick base cement mortar 1:4 ( 1 cement:4 coarse sand) with joints treated with white cement, mixed with matching pigment,epoxy touch ups, including rubbing, curing moulding and polishing to the edge to give high gloss finish etc. complete at all levels complete at all levels (Area of slab 1.0 sqm but upto 2.0 sqm) Granite of any colour and shade Area of slab over 0.50 sqm. 11.7 Providing and fixing 15mm thick USG - Radar Mineral Fibre False Ceiling Tiles or equivalent of size 600x600 mm in true horizontal levels suspended on inter locking metal grid of hot dipped galvanied steel sections (galvanized @ 170 gsm/sqm) consisting of main "T" runner suitably spaced at joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet, 1200mm long spaced between main "T" at 600mm center to center to form a grid of 1200x600mm and secondary cross "T" of length 600mm and size 24x25mm made of 0.30mm thick (minium) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and laying 15mm thick mineral fibre false eiling tiles of approved texture in the grid including, wherever, required, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats fixed to ceiling with 6mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanised level clips spaced at 1200m center to exposed width of 24mm of all T-sections shall be pre-painted with polyester paint, all complete at all heights as per specifications drawings and as directed by Engineer-in-Charge. Note: i) Only Mineral Fibre Ceiling area will be measured for the purpose of payment ii) The Mineral Fibre Ceiling shall either be precast (moulded) or wetted product and shall have NRC value of 0.5(minimum) CAC 35-39, light reflection 84% (minimum), fire rating class A as per ASTM E-84, suitable for 95% relatie humidity and also having Thermal Reswistancce "(R)"=0.33M sq. deg. C/W iii) The job to be carried out by reputed company like Lioyds insulations ( India) Ltd., or equivalent having sufficient wok experience. TOTAL OF SUB-HEAD-11
sqm
38
2543.65
96658.70
sqm
1450
931.40
1350530
1549016.20
17
1253105.00
CIVIL
BOQ
Amount (Rs.)
DSR items NS items
2.6.1 2.25
cum
1168
101.85
118960.80
cum
1332
45.70
60872.40
16.1
sqm cum
811 125
33.90 438.85
27492.90 54856.25
16.5.1 4.6
cum
125
136.20
17025.00
4.6.1 23.2
cum
10
4115.15
41151.50
cum
55
16.95
932.25
cum cum
5330 4
76.48 66.51
407638.40 266.04
BOQ
18
CIVIL
Amount (Rs.)
DSR items NS items
4.1
Filling areas with good earth in layer not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering to at least 95% of MDD(Proctor Density). 12.10 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level. 12.10.1 1:4:8 (1 Cement : 4 coarse sand :8 graded stone aggregate 40 mm nominal size) 12.10.2 1:3:6 (1 Cement:3 coarse sand:6 graded stone aggregate 20 mm nominal size) 12.11 First class brick work in foundations and plinth in cement mortar 1:6 (1 cement : 6 coarse sand) 12.12 20mm thick cement plaster of mix 1:2 (1cement: 4 fine sand) 12.13 Finishing walls with waterproof cement paint of required shade 12.14 New work (Two or more coats applied @3.84 kg/10sqm) 12.15 Supplying and stacking sludge at site including royalty and carriage upto 1 km (sludge measured in stacks will be reduced by 8% for payment).
cum
4445
160.00
711200.00
85 21 5 1000 1000
23.10
23.10.3 16.42
NS 23.14
23.14.1 23.14.2
cum 12.16 Grassing with DOOB grass, including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for mowing including supplying good earth if needed ( the good earth will be paid separately), In rows 5cm apart in either direction 100sqm 12.17 Cement concrete 1:2:4(1 cement:2 coarse sand :4 graded stone aggregate 40 mm nominal size) in pavement, laid to requried slope and camber in panels as required including consolidation finishing and tamping complete. cum 12.18 Supplying and filling, in plinth with locally available sand under floors including, watering, ramming consolidating and dressing complete. cum 12.19 Digging holes in ordinary soil and refilling the same with the excavated earth, mixed with manure or sludge in the ratio of 2:1by volume(2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%), flooding with water, dressing including removal of rubbish and surplus earth, if any with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) 12.19.1 Hole 1.2m dia and 1.2m deep each 12.19.2 Hole 60cm dia and 60cm deep each
38
136.85
5200.30
80
384.85
30788.00
85 20
3638.55 307.15
309276.75 6143.00
22 11
146.65 19.25
3226.30 211.75
BOQ
19
CIVIL
Amount (Rs.)
DSR items 1083.30 NS items
NS
12.20 Mixing earth and sludge or manure in proportion specified or directed. cum 12.21 Filling mixture of earth and sludge or manure in the desired proportion in trenches, flooding with water and levelling (cost of supllying earth and sludge or manure and mixing excluded) 12.22 Supplying and planting best quality container grown healthy trees of 1.5m height of species as specified including 1 tears maintenance. All trees to be approved before planting . TOTAL OF SUB-HEAD-12 138
cum
138
3.95
545.10
NS
No
33
300.00 1485916.09
9900.00 746928.00
BOQ
20
CIVIL
2890340.85 4589372.91
1699032.06
BOQ
ABST PLUMBING
Amount (Rs.)
DSR items NS items
Unit
Qty
DSR
NS
17.1.1 17.3
1.1.1 1.2
each
24
2304.65
55311.60
17.3.1 17.4
1.2.1 1.3
each
53
3282.95
173996.35
each each
2 12
2018.70 4491.60
4037.40 53899.20
17.7.4 17.10
1.4.1 1.5
each
58
1044.90
60604.20
17.10.1
BOQ
a)
PLUMBING
Amount (Rs.)
DSR items 10450.30 NS items
Unit
Each
Qty
2
DSR
5225.15
NS
Each
83
49.10
4075.30
17.11.2 17.31
1.7.1 1.8
Each
25
2149.95
53748.75
Each 17.34 17.34.1 N.S. 18.49 18.49.1 18.53 18.53.1 18.21 18.21.2 18.21.2.1 N.S. N.S. 17.71 Providing and fixing toilet paper holder: CP brass Providing and fixing C.P. robe hooks of an approved equivalent. Providing and fixing CP brass bib cock of approved quality conforming to IS:8931. 1.11.1 15mm nominal bore 1.12 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 1.12.1 15mm nominal bore 1.13 Providing and fixing uplasticised PVC connection pipe with brass unions. a) 45 cm length 1.13.1 15mm nominal bore 1.14 Providing and fixing C.P. sink mixer with swinging spout of approved equivalent. 1.15 Providing & fixing C.P. sink cock with Elbow action of approved equivalent. 1.16 Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. 1.17 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 1.17.1 600mm long towel rail with total length of 645 mm width, 78 mm and effective height of 88 mm, weighingnot less than 190 gms.
3
58 53 77
Each Each
each
77
207.00
15939.00
Each
173
347.65
60143.45
173 2 25
Each
58
164.65
9549.70
17.73
17.73.2
Each
33
329.50
10873.50
PLUMBING
BOQ
Amount (Rs.)
DSR items NS items
N.S. N.S. N.S. N.S. N.S. N.S. N.S. N.S. N.S. N.S. N.S.
N.S. N.S.
BOQ
a) 1.25.1
Providing and fixing PTMT grating of approved quality and colour Circular Type 100mm nominal dia Each Providing and fixing automatic high pressure electric water heaters (Recold or approved equivalent) with glass lining thermostats with each element and high temperature cut off, necessary insulation, safety valve, etc., all complete. 15 Litres Each 25 Litres Each Providing and fixing soil, waste and vent pipes 100mm diameter Centrifugally cast (spun) iron socketed pipe as per IS:3989 Metre 75mm diameter Centrifugally cast (spun) iron socketed pipe as per IS:3989 Metre Providing and fixing M.S. holder-bat clamps of approved design to sand cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including cost of cutting holes and making good the walls, etc. For 100mm dia pipe Each For 75mm dia pipe Each Providing and fixing single unequal junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete. 100x100x75mm Centrifugally cast (spun) iron as per IS:3989 each Providing and fixing plain bend of required degree: 100mm Centrifugally cast (spun) iron as per IS:3989 Each 75mm Centrifugally cast (spun) iron as per IS:3989 Each Providing and fixing heel rest sanitary bend 100mm dia Centrifugally cast (spun) iron as per IS:3989 Each 75mm Centrifugally cast (spun) iron as per IS:3989 Each Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete 100 x 100 x 100mm Centrifugally cast (spun) iron as per IS:3989 Each
4
22
39.70
873.40
2 12
5484.00 6057.00
10968.00 72684.00
684 106
730.40 629.85
499593.60 66764.10
380 16
65.35 63.00
24833.00 1008.00
76
933.35
70934.71
48 18
346.33 261.72
16623.65 4711.00
34 2
419.50 365.52
14263.09 731.04
84
717.26
60250.18
PLUMBING
Amount (Rs.)
DSR items NS items
N.S. N.S. N.S. N.S. N.S. N.S. N.S. 17.58 17.58.1 17.58.2 17.59 17.59.1 17.59.2 N.S. N.S. N.S. N.S. N.S. 17.6
a) 1.26.1 1.27 a) 1.27.1 b) 1.27.2 1.28 1.28.1 1.28.2 1.29 1.29.1 1.29.2 1.30 a) 1.30.1 b) 1.30.2 1.31
N.S. N.S. N.S. N.S. N.S. N.S. N.S. N.S. N.S. N.S.
N.S.
1.33.1
Providing and fixing double unequal junction of required degree with access door, insertion rubber washer 3mm thick, bolts and nuts complete: 100 x 100 x 75 x 75mm Centrifugally cast (spun) iron as per IS:3989 Each Providing and fixing terminal guard 100mm Centrifugally cast (spun) iron as per IS:3989 Each 75mm Centrifugally cast (spun) iron as per IS:3989 Each Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter 100mm Each 75mm Each Providing and fixing M.S. stays and clamps for sand cast iron/centrifugally cast (spun) iron pipe of diameter: 100mm Each 75mm Each Providing and fixing door piece, insertion rubber washer 3mm thick, bolts and nuts complete: 100mm Centrifugally cast (spun) iron as per IS:3989 Each 75mm Centrifugally cast (spun) iron as per IS:3989 Each Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors: 100mm inlet and 75mm outlet Centrifugally cast (spun) iron as per IS:3989 Each 100mm inlet and 100mm outlet Centrifugally cast (spun) iron as per IS:3989 Each Providing and fixing collar 100mm Centrifugally cast (spun) iron as per IS:3989 Each 75mm Centrifugally cast (spun) iron as per IS:3989 Each Providing and laying cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 sand aggregate 20mm down grade) 75mm in bed alround C.I. soil and waste pipe. 100mm and 75mm dia under floor including shuttering and centering Metre
1234.56
2469.11
34 2
281.65 259.96
9575.97 519.93
940 280
126.50 107.80
118910.00 30184.00
34 2
48.25 41.55
1640.50 83.10
34 2
434.81 333.14
14783.61 666.28
56 18
839.96 797.40
47037.63 14353.19
48 12
296.96 214.04
14253.86 2568.44
174
93.26
16227.24
BOQ
PLUMBING
Amount (Rs.)
DSR items NS items
Painting sand cast iron/centrifugally cast (spun) iron soil, waste vent pipes and fittings with paint of any colour such as chocolate, grey or buff, etc., over a coat of primer (of approved quality) for new work. 1.34.1 100mm diameter pipe 1.34.2 75mm diameter pipe 1.35 Providing and fixing 100mm dia G.I. Inlet fitting of standard design and as shown in drawing with two-three inlets, suitable for 32mm to 50mm G.I. Pipes and 75mm to 100mm outlet. TOTAL OF SUB-HEAD-1
Metre Metre
510 30
17.85 13.70
9103.50 411.00
Each
74
603.00 1310202.70
44622.00 488527.94
BOQ
PLUMBING
Amount (Rs.)
DSR items NS items
Unit
Qty
DSR
NS
18.10.1 18.10.2 18.10.3 18.10.4 18.10.5 18.10.6 N.S. N.S. 18.11 18.11.1 18.11.2 N.S. N.S. 18.16 18.16.1 18.16.2 18.17 18.17.1 18.17.2 18.17.3 18.17.4 18.17.5 18.17.6 18.18 18.18.3 N.S. 18.38
2.1.1 2.1.2 2.1.3 2.1.4 2.1.5 2.1.6 2.1.7 2.1.8 2.2 2.2.1 2.2.2 2.2.3 2.2.4 2.3 2.3.1 2.3.2 2.4 2.4.1 2.4.2 2.4.3 2.4.4 2.4.5 2.4.6 2.5 2.5.1 2.5.2 2.6
10 48 50 216 94 136 40 30
24 11 3 12 3 2
each each
6 2
385.90 1200.00
2315.40 2400.00
10 48 50 216 94
Amount (Rs.)
DSR items 1604.80 NS items 560.00 480.00
Unit
Metre Metre Metre
Qty
136 40 30
DSR
11.80
NS
14.00 16.00
120 185 40 50 50
18.13.2 18.40 18.40.3 18.40.4 18.40.5 18.40.6 18.40.7 18.41 18.41.3 18.41.4 18.41.5 18.41.6 18.41.7
2.8.1 2.9 2.9.1 2.9.2 2.9.3 2.9.4 2.9.5 2.10 2.9.1 2.10.1 2.10.2 2.10.3 2.10.4 2.11
Each
423.20
423.20
120 185 40 50 50
120 185 40 50 50
NS NS NS NS NS
2 2 1 2 2
BOQ
PLUMBING
Amount (Rs.)
DSR items NS items
Unit
Qty
DSR
NS
18.32.1 18.48
2.12.1 With F.P.S. bricks Each 2.13 Providing and placing on terrace (at all floor levels ) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet , outlet and overflow pipes but without fittings and the base support for tank. per ltr TOTAL OF SUB-HEAD-2
5998.00
55000
5.25
288750.00 665421.60
98937.00
BOQ
PLUMBING
Amount (Rs.)
DSR items NS items
Unit
Qty
DSR
NS
36 270 20
36 270 20
19.3.4 19.4
3.3.1 3.4
a) 3.4.1 3.5
230 mm diameter S.W. pipe metre Providing and fixing square - mouth S.W. gully trap grade 'A' complete with C.I. grating brick masonary chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cober to be not less than 4.50 kg and frame to be not less than 2.70 kg as per stadard design: 150 x 100mm size P-type With FPS bricks class designation 75 each Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 (1 cement : 2 coarse snad : 8 graded stone aggregate 40mm nominal size ) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per stadard design : Inside size 90cm x 80cm and 60cm deep including C.I. cover with frame (medium duty) 500mm internal dimensions total weight of cover and frame to be not less than 116 kg. (wt. of cover 58 kg. And wt. of frame 58 kg.) 1. With F.P.S. bricks with class designation 75 each Extra for depth for manholes Size 90 x 80 cm With F.P.S . Bricks class designation 75 meter
10
20
328.95
6579.00
18
961.95
17315.10
a)
34
8286.14
281728.62
2654.00
5308.00
PLUMBING
Amount (Rs.)
DSR items NS items
19.9.1
a)
2.10
3.10
Constructing brick masonry circular type manhole 0.91m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), in side cement plaster 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design 0.91m deep with S.F.R.C. cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including centering shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately). With F.P.S. bricks class designation 75 Each Extra depth for circular type manhole 0.91m internal dia (at bottom) with beyond 0.91m to 1.67m) With F.P.S. bricks class designation 75 Meter Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS:10910 on 12mm dia steel bar conforming to IS:1786 having minimum cross section as 23 mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruded legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30 x 20 x 15cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete as per design. Each Excavating trenches of required width for pipes, cables, etc., including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5m including getting out the excavated soil and then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed within a lead of 50m. All kind of soils
11
10
4933.50
49335.00
2289.75
6869.25
120
182.40
21888.00
2.10.1
BOQ
a)
PLUMBING
Amount (Rs.)
DSR items 35205.30 NS items
NS
3.10.1 Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm dia. 3.11 Metre Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5m, but not exceeding 3m. (Rate is over corresponding basic item for depth upto 1.5 metre.) Metre Making soak pit 2.5m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100mm diameter, 1.8m long complete as per standard design. Each With flyash bricks class designation 75 TOTAL OF SUB-HEAD-3 306
153.00
612.00
21.39.2
3.12
6396.25
BOQ
12
PLUMBING
Amount (Rs.)
DSR items NS items
Unit
Qty
DSR
NS
Metre Metre
40 48
546.00 780.00
21,840.00 37,440.00
19.27.1 2.10
4.3.1 4.5
Each
10
2248.35
22,483.50
4.5.1 All kind of soils 4.5.1.1 Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm dia. Metre 4.6 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m. All Kinds of soil Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth: consolidating each deposited layer by ramming and watering, lead up to 50m and lift upto 1.5m. Cum. 116 103.40 11,994.40 130 115.05 14,956.50
2.8.1 2.25
4.6.1 4.7
Cum.
16
45.70
731.20
BOQ
13
PLUMBING
Amount (Rs.)
DSR items NS items
Unit
Qty
DSR
NS
15,000.00
4.1
4.9
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - all work upto plinth level.
5.12
1:4:8 ( 1 cement : 4 fine sand : 8 graded stone aggregate 40mm nominal size) 4.9.2 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size) 4.10 Brick work with F.P.S. bricks of class designation 75 in foundation and 4.10.1 Cement mortar 1:4 (1 cement : 4 coarse sand) 4.11 12mm cement plaster of mix : 4.11.1 1:4 (1 cement : 4 coarse sand) 4.12 Providing, hoisting and fixing precast reinforced cement concrete in perforated slab including setting in cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centring, shuttering and finishing with neat cement punning on exposed surfaces but excluding the cost of reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size). 4.13 Providing, hoisting and fixing upto floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like including the cost of required centring, shuttering, finishing smooth with 6mm thick cement plaster 1:3 (1 cement : 3 fine sand) on exposed surfaces complete but excluding cost of reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size). Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. 4.14.1 Thermo-Mechanically Treated bars. TOTAL OF SUB-HEAD-4 4.14
4.9.1
20 11 30 236
Cum.
6,840.10
34,200.50
30
4882.25
146,467.50
Kg.
1257
42.70
53,673.90 472,133.90
86,640.50
BOQ
14
PLUMBING
Amount (Rs.)
DSR items NS items
Unit
Qty
DSR
NS
12.40.2 12.42
12.43.2 12.44
5.1.1 Single socketed pipes 5.1.1.1 110 mm diameter Metre 5.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised - Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. 5.2.1 Shoe (Plain) 5.2.1.2 110mm Shoe Each 5.3 Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50 x 50 x 50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 5.3.1 110mm Each 5.4 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diametre and weighing not less than 440 grams. Each TOTAL OF SUB-HEAD-5
390
163.40
63726.00
26
263.10
6840.60
216 26
96.90 23.40
0.00
BOQ
15
PLUMBING
Amount (Rs.)
DSR items NS items
Unit
Qty
DSR
NS
6.1.1
Each
40838.00
81676.00
N.S.
6.2
N.S.
set set
1 1
6806.00 5990.00
6806.00 5990.00
N.S.
Each Each
2 2
3267.00 2995.00
6534.00 5990.00
N.S.
Each Each
1 2
3880.00 3403.00
3880.00 6806.00
set
34031.00
34031.00
N.S.
6.6 6.6.1
Mtr
10
272.00
2720.00
N.S.
6.7 6.7.1
Mtr
88.00
528.00
PLUMBING
BOQ
Amount (Rs.)
DSR items NS items
Unit
Qty
DSR
NS
N.S.
6.8.1 6.9
Mtr Each
6 2
BOQ
17
PLUMBING
Amount (Rs.)
DSR items NS items
NS NS NS
NS NS NS
TUBE WELL AND TUBE WELL PUMPS 7.1 BORING PART 7.1.1 Drilling with caylex/RC/DC rig having 16"/18" dia bore size in all kind of strata except hard rock. mtr 7.2 SUPPLY AND FIXING 7.2.1 8" dia UPVC plain pipe of jain/ Finolex make or equivalent mtr 7.2.2 8" dia UPVC slotted pipe of jain/Finolex make or equivalent mtr 7.3 Tubewell Fittings L.S. 7.4 Pea Gravel L.S. 7.5 Development of tubewell with heavey duty air compressor. L.S. 7.6 Supply of KSB make submersible pumping set with 7.5 HP with motor 6 stage pump suitable for 400 LPM at 56 mtr. Head respectively. Three phase each 7.7 2 1/2" dia GI column pipe of Jindal or equivalent B class including heavy sockets. mtr 7.8 Cable 4 sq.mm. mtr 7.9 Panel Board for Submersible pump fitted with L&T make or equipvalent DOL starter ammeter, voltmeter single phase preventer, standard/ indocop or equpvalent make MCB on / off switch pump button duly wired and made out of 16/18 SWG shet. each 7.10 2 1/2" dia fitting 1.s 7.11 Lowreing of pump set. each 7.12 Transportation of equipment and material. 1.s
100 42 48 1 1 1
1 60 80
1 1 1 1
TOTAL OF SUB-HEAD-7
0.00
BOQ
18
PLUMBING
ELECTRICAL WORKS
(Page No. 1 to 28)
TOTAL
3,087,759.00
8,732,894.00
GRAND TOTAL
11,820,653.00
BOQ
ABST ELECT
Amount (Rs.)
DSR items NS items
Unit
Qty
DSR
NS
1.10.3 1.11
1.1.1 1.2
447300.00 8154.00
1.12
1.3
Mtr
4500
97.00
436500.00
1.13
1.4
Mtr
500
149.00
74500.00
1.14
1.5
1.14.1
a)
710000.00
BOQ
ELECTRICAL
DSR 2007/N S
1.14.4 1.14.5 1.14.10 1.14.11 1.14.12 1.21
Amount (Rs.)
DSR items 177800.00 102600.00 196650.00 161700.00 48700.00 NS items
Description of item
2 x 6 Sqmm +1x 6 Sq.mm (For submain & 20 A power socket wiring) 2 x 10 Sqmm +1x10 Sq.mm (For submain ) 4 x 6 Sqmm +2 x 6 Sq.mm (For submain wiring) 4 x 10 Sqmm +2 x 10 Sq.mm (For submain wiring) 4 x 16 Sqmm +2 x 16 Sq.mm (For submain wiring) Supplying and laying of the following of PVC conduit alongwith accessoris in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (For telephone & TV wiring). 20mm 25mm Supplying & fixing suitable size GI box of with modular plate and cover in front on surface or in recess including providing & fixing 3 pin 5/6 Amp. Modular socket outlet and 5/6 Amp. Modular switch, connections, painting etc. as required. Supplying & fixing suitable size GI box of with modular plate and cover in front on surface or in recess including providing & fixing 6 pin 15/16 Amp. Modular socket outlet and 15/16 Amp. Modular switch, connections, painting etc. as required. Supplying & fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 16 Amp. Switch 3 Pin 5/6 Amp. Socket outlet Telephone socket outlet TV antenna socket outlet Supplying & fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. Supplying & fixing modular blanking plate on the existing modular plate and switch box excluding modular plate as required.
Unit
Mtr Mtr Mtr Mtr Mtr
Qty
1400 600 950 550 100
DSR
127.00 171.00 207.00 294.00 487.00
NS
a) b) 1.6
300 200 56
1.32
1.7
Each
81
214.00
17334.00
1.24
1.8
a) b) c) d) 1.9
96 288 47 4 226
1.26
1.10
Each
140
20.00
2800.00
BOQ
ELECTRICAL
DSR 2007/N S
1.27
Amount (Rs.)
DSR items NS items
Description of item
Supplying & fixing following size/modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 or 2 Module (75 mm x 75 mm) 8 Module (125 mm x 125 mm) Supplying and drawing following PAIR, 0.5 Sq.mm FR PVC insulated copper conductor, unarmoured telephone cable in the existing surface/recessed steel/PVC conduit as required. 2- Pair 4- Pair Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/recessed steel/PVC conduit as required. TOTAL OF SUB-HEAD - I
Unit
Qty
DSR
NS
a) b) 1.12
Each Each
51 96
88.00 177.00
4488.00 16992.00
a) b) 1.13
900 200 80
2543111.00
BOQ
ELECTRICAL
DSR 2007/N Sl. No. Description of item S SUB-HEAD-II MCB DISTRIBUTION BOARD
2.51 2.1 Supplying & fixing 5 Amps. to 32 Amps. Rating, 240 Volts, "B" series, miniature circuit breaker suitable for lighting and other loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole Triple Polel Supplying and fixing of following way, single pole and neutral, sheet steel, MCB distribution board consumer unit, 240 Volts on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs, detachable gland plate, inter-connections, phosphatized and powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 2 + 4Way 2 + 8 Way Supplying and fixing of following rating, double pole, (single phase & neutral), 240 Volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 mA in the existing MCB DB complete with connections, testing and commissioning as required. 25 amps. 40 amps. Supplying and fixing of following rating, four pole, (three phase & neutral) 415 Volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 mA in the existing MCB DB complete with connections, testing and commissioning as required. 25 Amps. 40 Amps. 63 Amps.
Amount (Rs.)
DSR items NS items
a) b) 2.2
Each Each
450 10
86.00 273.00
38700.00 2730.00
a) b) 2.3
Each Each
1 26
559.00 654.00
559.00 17004.00
a) b) 2.4
Each Each
18 11
949.00 1007.00
17082.00 11077.00
a) b) c)
15 7 3
BOQ
ELECTRICAL
DSR 2007/N S
2.33
Amount (Rs.)
DSR items NS items
Description of item
Supplying and fixing following way, three pole and neutral, sheet steel, MCB distribution board consumer unit, 415 Volts on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs, detachable gland plate, inter-connections, phosphatized and powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). 4 Way 6 Way Supplying & fixing single pole blanking plate in the existing MCB DB complete etc. as required. Supplying and fixing 20 Amps. 240 Volts, SPN industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alogwith 32Amps., C-series, SP MCB, in sheet steel enclosure, on surface or in recess, with chaied metal cover for the socket, outlet, and complete with connections, testing and commissioning etc. as required. Supply, installation, testing & commissioning of LT Main Distribution Board suitable for operation on 415V, 50 Hz, 3 phase, 4 wire, AC system capable of withstanding fault level of 35 KA, 415 volts. The panel shall be indoor, free floor standing, metal clad, powder coated, dust & vermin proof, compartment type enclosure of IP-42 & fabricated out of 2mm thick CRCA sheet with necessary electrolytic alum. bus-bar and cable alleyes and foundation channel of 100x50x6mm. The incoming and outgoing feeders shall be accomodated in a multi-tier arrangement, painting, earthing, sign writing, numbering etc. complete as per specifications & single line diagram and comprising the following switchgear and accessories: (Shop drawing to be got approved prior to execution of work). MDB (NORMAL) at ground floor. INCOMER
Unit
Qty
DSR
NS
a) b) 2.6 2.7
25 2 105 21
NS
2.8
Each
160875.00
482625.00
BOQ
ELECTRICAL
DSR 2007/N S
Amount (Rs.)
DSR items NS items
Unit
Qty
DSR
NS
a) b) c) NS 2.9
Each
155010.00
465030.00
BOQ
ELECTRICAL
DSR 2007/N S
Amount (Rs.)
DSR items NS items
Unit
Qty
DSR
NS
a) b) c)
150954.00
947655.00
BOQ
ELECTRICAL
DSR 2007/N Sl. No. Description of item Unit S SUB-HEAD-III EARTHING Earthing with copper earth plate 600mm x 600mm x 3mm thick Set 3.6 3.1
i/c. accessories & providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete etc. as required. 3.7 3.13 3.2 3.3 3.4 3.17 a) Extra for using salt and charcoal for GI or copper plate earth electrode as required Providing and fixing 25mm x5mm copper strips in 40mm dia GI pipe from earth electrode as required. Providing and fixing of following sizes copper strips on surface or in recess for connection etc. as required 25mm x 5mm TOTAL OF SUB-HEAD - III Set Mtr
Amount (Rs.)
DSR items 13052.00 NS items
NS
4 20
603.00 494.00
2412.00 9880.00
Mtr
60
358.00
21480.00 46824.00
BOQ
ELECTRICAL
Amount (Rs.)
DSR items 1908.00 NS items
NS
4.4
4.2
4.5
4.3
4.6
4.4
4.11
4.5
Providing & fixing of lightning conductor finial, made of 25 mm dia Each 300 mm long, copper tube, having single prong at top, with 85 mm dia 6 mm thick copper base plate including holes etc. complete as required. Reverting, sweating and soldering of copper/G.I. tape (with Each another copper/GI tape, base of the finial or any other metallic object) as required. Providing and fixing copper tape 20mm x 3mm thick on parapet Metre or surface of wall for lightning conductor complete as required (For horizontal run) Providing and fixing copper tape 20mm x 3mm thick on parapet Metre or surface of wall for lightning conductor complete as required. (For vertical run) Providing and fixing testing joint, made of 20 mm x 3 mm thick Each copper strip, 125mm long, with 4 nos. of tinned brass bolts, nuts, check nuts and spring washers etc. complete as required Providing and laying copper tape 32 mm x 6 mm from earth electrode directly in ground as required. Earthing with copper earth plate 600mm x 600mm x 3mm thick i/c. accessories & providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete etc. as required. Extra for using salt and charcoal for GI or copper plate earth electrode as required TOTAL OF SUB-HEAD - IV
90
56.00
5040.00
400
163.00
65200.00
100
175.00
17500.00
108.00
648.00
4.13 3.6
4.6 4.7
Metre Set
60 6
475.00 3263.00
28500.00 19578.00
3.7
4.8
Set
603.00
3618.00 141992.00
BOQ
10
ELECTRICAL
DSR 2007/N Sl. No. Description of item Unit S SUB-HEAD - V FITTINGS AND ACCESSORIES Supplying of light fittings complete with all standard accessories NS 5.1
a) with choke, starter, capacitor etc. as per specifications of the following type as required. 1X36 watt box type fluorescent light fixture with lamp as per PHILIPS Cat NO.TMS 021/136 HPF or similar specifications of other approved makes. 2X36 watt box type fluorescent light fixture with lamp as per PHILIPS Cat NO.TMS 021/236 HPF or similar specifications of other approved makes. 1X36 watt fluorescent mirror optics light fixture with lamp as per Philips Cat NO.TCS 306/136 HPF or similar specifications of other approved makes. 2X36 watt fluorescent light fixture with lamp as per Philips Cat NO.TCS 306/236 HPF or similar specifications of other approved makes. 2X18 watt CFL rectangular ceiling light fixture with lamp as per PHILIPS Cat.No. FCS 350/218 MI or similar specifications of other approved makes. 1X18 watt fluorescent mirror light fixture with lamp as per DECON Cat.No. 04FA 01/ 02 or similar specifications of other approved makes. 4X18 watt rectangular fluorescent light fixture with lamp as per DECON Cat.No.03JP or similar specifications of other approved makes. 25 watt CFL circular decorative ceiling light fixture with lamp as per PHILIPS Cat.No.Deco Twist Lux BCS 1902 or similar specifications of other approved makes. 1X70 watt metal halide light fixture with lamp as per DECON Cat.No.79 PK or similar specifications of other approved makes. 1x60 W GLS bulk head fitting with lamp as per PHILIPS Cat.No. NXC 101 or similar specifications of other approved makes. . Each
Amount (Rs.)
DSR items NS items
28
760.00
21280.00
b)
Each
185
1112.00
205720.00
c)
Each
2053.00
18477.00
d)
Each
196
2753.00
539588.00
e)
Each
208
1795.00
373360.00
f)
Each
19
2065.00
39235.00
g)
Each
158
3991.00
630578.00
h)
Each
50
1226.00
61300.00
i)
Each
24
3306.00
79344.00
j)
Each
18
715.00
12870.00
BOQ
11
ELECTRICAL
DSR 2007/N S
`
Amount (Rs.)
DSR items NS items 53788.00
Description of item
Unit
Qty
68
DSR
NS
791.00
l)
m)
1X60W GLS DECORATIVE WALL LAMP SET WITH LAMP Each (PAINT FINISH) VIDE DECON CAT. NO.0555 or similar specifications of other approved makes. 1X13W CFL DRUM LIGHT SET WITH LAMP (PAINT FINISH) Each VIDE DECON CAT. NO.03 TY or similar specifications of other approved makes. 1X36 watt fluorescent street light fixture with lamp as per Philips Each Cat NO.HGS 120/136 HPF with GI Bend pipe as required. Supplying of approved make ceiling fan of double ball bearing of the following sizes with its all accessories suitable for operation on 230V single phase, 50 Hz, AC supply complete as per specifications as required. 1200mm sweep Supplying,installation, testing and commissioning of approved make wall mounting air circulator of 600 mm size with all its accessories suitable for operation on 230V single phase, 50 Hz, AC supply complete as per specifications as required. Supplying of 230V (nominal voltage) exhaust fan with its all accessories complete as per specifications as required of following size: 305mm sweep1400 RPM (Heavy duty) 380mm sweep1400 RPM (Heavy duty) Supplying of louvers for the above exaust fans etc. as required. Installation, testing and commissioning of prewired fluorescent fitting/compact fluorescent fitting of all types, complete with all accessories and tubes etc. directly on ceiling/wall including connection 1.5 Sqmm FR PVC insulated, copper conductor, single core cable and earthing etc. as required. Erection of wall bracket/ceiling fittings of all sizes and shapes containing upto two GLS lamps per fitting, complete with all accessories including connection etc. as required.
15
1102.00
16530.00
47
1867.00
87749.00
NS
5.2
NS
a) 5.3
Each Each
226 6
1697.00 8427.00
383522.00 50562.00
NS
5.4
NS 1.41
a) b) 5.5 5.6
16 60 76 650 43.00
1.35
5.7
Each
86
19.00
1634.00
BOQ
12
ELECTRICAL
DSR 2007/N S
1.44
Amount (Rs.)
DSR items 8415.00 NS items
Description of item
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard lenght(upto 30 cm) with 1.5 Sqmm FR PVC insulated, copper conductor, single core cable etc. as required. Installation of exhaust fan upto 450mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connections, testing and commissioning etc. as required. Extra for fixing of louvers/shutters complete with frame for exhaust fans of all sizes. Supplying and fixing brass batten/angle holder including connection etc. as required. Supplying and fixing call bell/buzzer suitable for D.C/A.C single phase, 230 Volts, complete as required. TOTAL OF SUB-HEAD - V
Unit
Each
Qty
187
DSR
45.00
NS
1.52
5.9
Each
76
223.00
16948.00
76 36 47
BOQ
13
ELECTRICAL
Amount (Rs.)
DSR items NS items
NS
NS
Nos.
100
150.00
15000.00 1081100.00
BOQ
14
ELECTRICAL
Amount (Rs.)
DSR items NS items 67500.00
Each
15
NS
7.2
Mtr
45
200.00
9000.00
NS
7.3
Each
15
821.00
12315.00
NS
7.4
Each
15
3960.00
59400.00
BOQ
15
ELECTRICAL
DSR 2007/N S
Amount (Rs.)
DSR items NS items
Unit
Qty
DSR
NS
NS
7.5
Set
52700.00
52700.00
BOQ
16
ELECTRICAL
DSR 2007/N S
NS
Amount (Rs.)
DSR items NS items
Description of item
Supplying and laying in ground or on surface or in existing pipe as per CPWD specifications of PVC insulated and PVC sheathed armoured aluminium conductor cable of 1.1 KV grade conforming to IS:1554 (Part-I) of the following size: 4.0C x 16 Sqmm 4.0C x 10 Sqmm Supplying & making end termination with brass compression glands and aluminum lugs for the following sizes of 1.1KV grade PVC aluminium conductor armoured cable as required. 4.0C x 10 Sqmm 4.0C x 16 Sqmm Supply & laying of following sizes of hume pipes including collars for road crossing, paved areas etc. including jointing with stiff mixture of cement mortar in proportion of 1:2, digging the trench, back filling etc. complete in all respects as per direction of Engineer-in- charge. 100mm dia WIRING & EARTHING: Supplying & drawing of following sizes of PVC insulated copper conductor single core cable in the existing surface /recess PVC/steel conduit as required. (For wiring of light fitting from junction box) 3 X 2.5 Sqmm (1Phase+1Neutral+1Earth) Earthing with GI earth plate 600mm x 600mm x 3mm thick i/c. accessories & providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete etc. as required. Extra for using salt and charcoal for GI or copper plate earth electrode as required Providing and fixing 25mm x 5mm GI strips in 40mm dia GI pipe from earth electrode as required.
Unit
Qty
DSR
NS
a) b) 7.7
Mtr Mtr
100 500
308.00 262.00
30800.00 131000.00
4.1.32 4.1.33 NS
b) c) 7.8
Set Set
30 2
104.00 196.00
3120.00 392.00
a) SR 7.9
Mtr
10
250.00
2500.00
1.17.12 3.5
a) 7.10
Mtr Set
75 2
43.00 1585.00
3225.00 3170.00
3.7 3.14
7.11 7.12
Set Mtr
2 6
603.00 218.00
1206.00 1308.00
BOQ
17
ELECTRICAL
DSR 2007/N S
SR 3.18 3.1
Amount (Rs.)
DSR items NS items
Description of item
Providing and fixing of following size GI strip on surface or in recess for connection etc. as required 25mm x 5mm Earthing with GI earth pipe 4.5m long x 40mm dia including accessories & providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete etc. as required. Extra for using salt and charcoal for GI pipe earth electrode as required Providing & fixing earth connections from earth electrode with 6 SWG GI wire in 15mm dia GI pipe from earth electrode as required. Providing & fixing 6 SWG dia GI wire on surface/inrecess for loop earthing alongwith the existing surface/recess conduit submain wiring/ cable as required. TOTAL OF SUB-HEAD - VII
Unit
Qty
DSR
NS
Mtr Set
10 4
66.00 1496.00
660.00 5984.00
3.3 3.15
7.15 7.16
Set Mtr
4 15
475.00 86.00
1900.00 1290.00
3.21
7.17
Mtr
1185
11.00
13035.00
35290.00
365215.00
BOQ
18
ELECTRICAL
Amount (Rs.)
DSR items NS items
Unit
Qty
DSR
NS
1800000.00
i)
ii)
BOQ
19
ELECTRICAL
DSR 2007/N S
Amount (Rs.)
DSR items NS items
Description of item
24 Volts D.C. electrical start system complete with starting arrangement, sealed maintenance free (SMF) starting batteries of suitable capacity with leads, trickle/boost battery charger set with instruments & indication arrangements and other accessories In line mono-block fuel injection pump with electronic governig system and fuel feed pump with accessories. ENGINE CONTROL PANEL - This control panel consists of ON/OFF START keys, Lub.oil pressure gauge, Coolent temperature gauge, D.C. Ammeter, D.C. Voltmeter, electronic Hour- meter etc. as required. BASE FRAME - Common base frame of required size for mounting of Engine-Alternator set fabricated with MS channel as per manufacturer's recommendations and vibration damping arrangement with cushy foot mounting includings including painting etc. as required. FOUNDATION- Providing and making C.C. (1:2:4) foundation including edge protection with painted MS angle 50x50x6mm and plastering etc. The foundation shall be suitable for installation of 200 KVA/160 KW diesel engine- alternator set, starting batteries and control panel etc. FUEL TANK & FUEL PIPE - Supplying and installation of welded steel day tank to hold a total quantity suitable for 12 hours operation, complete with fuel level indicator, inlet and outlet pipes with strainers, internal piping arrangement and finished painting etc. Supplying and laying B-class GI pipe of suitable size to serve as fuel pipe from fuel tank to engine including necessary clamps supports, valves and braided flexible connections etc as required.
Unit
Qty
DSR
NS
iv) v)
vi)
vii)
viii)
BOQ
20
ELECTRICAL
DSR 2007/N S
Amount (Rs.)
DSR items NS items
Description of item
EXHAUST PIPE- Supplying and fixing of suitable size(as per manufacturer's recommendations) of MS pipe -B class conforming to IS-3589 for fume-exhaust with suitable supporting arangement, at suitable distance all along the full length from generator to 2m above the sub-station including cutting, jointing, welding, mineral wool insulation ,aluminium cladding and all other accessories like flanges, flexible coupling, bends, nuts and bolts, canopy and making masonary opening in the wall for exhaust pipe & finishing the same as required. COUPLING WITH COUPLING GUARDS - Providing 1 No. coupling as per manufacturer's recommendation to directly couple the engine with alternator. The coupling should have design to transmit power with minimum loses and absorbs jerks. Accoustic and weather proof enclosure with arrangement for fresh air intake for cooling of the engine & alternator , extraction , discharging hot air to the atmosphere as required. First fill of fuel oil in the day tank, engine test certificate, engine maintenance manual with the list of spare parts. ALTERNATOR (BRUSHLESS): 3 Phase, 4 wire, star connected, 415V, 50 Hz, 1500 RPM, self regulated type suitable to generate 200KVA/160KW at 0.8 pf (lag). The insulation class of windings shall be H. The voltage regulation shall be in the range of +/- 1.0% from full load to No load and from Hot to cold and unity and 0.8 pf with 4% speedregulation. Alternator should be suitable for being driven by the above engine at 1500 RPM and compatible with it. The alternator shall be in SPDP enclosure & shall be of rotating field type (brushless), synchronous, self excited, self -regulated, floor mounted with single bearing design, complete with all fittings & asseccories. The alternator shall confirm to IS 4722/BS-2613 and should be suitable for tropical conditions. AUTOMATIC MAIN FAILURE (AMF) PANEL:
Unit
Qty
DSR
NS
x)
xi)
xii)
i)
BOQ
21
ELECTRICAL
DSR 2007/N S
Amount (Rs.)
DSR items NS items
Description of item
Cubicle, compartmentalised, AMF panel board capable of withstanding fault level of 35KA. The panel shall be outdoor type, dust & vermin proof, free floor standing, metal clad, powder coated having suitable degree of protection as per latest IS Code & fabricated out of 2mm thick CRCA sheet with necessary electrolytic alum. bus bar, connections, inter-connections, internal wiring, gland plates, ON/OFF indication lamps, top/bottom entry of incoming and outgoing cables as per site requirement, painting, earthing, sign writing, numbering, complete with foundation channeel of 100x50x6mm etc. for trouble free smooth functioning of 200KVA/160KW, DG set so as to receive and terminate 1 incomer of 3.5x400 Sqmm armoured PVC insulated & sheathed aluminium conductor cables from LT main panel (Normal) & alternator control panel respectively and provide the provision of 1 No. outgoing cable of the same size to the Essential panel. The panel, broadly, comprises the following components/instruments: 2 Sets-400 Amps, 4 pole, adjustable type MCCB with micro processor based fault releases and equipped with ON/OFF indication lamps (2 Nos. incomer ) 3 Nos. CTs with suitable CT ratio and accuracy class for instrumentation. 1 No. ditigal type ammeter of suitable range with ASS. 1 No. digital Voltmeter 0-500V with VSS. 1 No. digital frequency meter of suitable capacity. 1 No. digital PF meter of suitable capacity. 1 No. digital KW meter of suitable capacity. 1 No. digital KWH meter of suitable capacity. 3 Nos. phase indicating lamps (RYB). 1 Set HRC type instrument fuses. 2 Nos. 400 Amps, 415V, 4 Pole AC1 duty power contactor. 1 Set - Micro-control based AMF control Logic with complete mains, alternator & DG automation & protection.
Unit
Qty
DSR
NS
BOQ
22
ELECTRICAL
DSR 2007/N S
Amount (Rs.)
DSR items NS items
Unit
Qty
DSR
NS
1800000.00
BOQ
23
ELECTRICAL
DSR 2007/N S
Rate (Rs.) Sl. No. Description of item LT PANELS, LT CABLES, TERMINATION,EARTHING & MISC WORKS
LT PANELS : Fabrication, Supply, installation, testing and commissioning of LT panel extendable type suitable for operation on 415V, 50 Hz, 3 phase, 4 wire, AC system capable of withstanding fault level of 50KA, 415 volts. The panel shall be indoor, free floor standing, metal clad, power coated, dust & vermin proof, compartment type enclosure of IP-42 & fabricated out of 2mm thick CRCA sheet with necessary bus bar and cable alleyes and foundation channel of 100x50x6mm. The incoming and outgoing feeders shall be accomodated in a multi-tier arrangement, painting, earting, sign writing, numbering shall be complete with foundation channel of 100x50x6mm as per specifications & single line diagram and comprise of the following switchgear and accessories: (Shop drawing to be got approved by the EngineerIn-Charge prior to fabrication). LT MAIN PANEL-NORMAL Set 1 259750.00
Amount (Rs.)
DSR items NS items
Unit
Qty
DSR
NS
SUB-HEAD - IX
NS 9.1
259750.00
INCOMER 1 No.-630A, 4 Pole MCCB(Ics=Icu,Ui=1000V), having breaking capacity of 50KA , ( Microprocessors type release with inbuilt O/L , S/C & E/F) 1 No. Digital type Ammeter with ASS and of suitable range with CTs of suitable class & capacity. 1 No. Digital type Voltmeter 0-500V with VSS. 1 Set - Phase indicating lamps. 1 Set - HRC backup fuses. BUS-BAR 1 Set - 630A TPN electrolytic aluminium bus bar for complete panel suitable for 50KA fault level covered with colour coded PVC sleeves. OUTGOING
BOQ
24
ELECTRICAL
DSR 2007/N S
Amount (Rs.)
DSR items NS items
Unit
Qty
DSR
NS
a) b) c) d) e) f) NS 9.2
233370.00
INCOMER 1 No.- 400A, 4 Pole MCCB(Ics=Icu,Ui=1000V), having breaking capacity of 35KA , ( Microprocessors type release with inbuilt O/L , S/C & E/F) 1 No. Digital type Ammeter with ASS and of suitable range with CTs of suitable class & capacity.
BOQ
25
ELECTRICAL
DSR 2007/N S
Amount (Rs.)
DSR items NS items
Unit
Qty
DSR
NS
NS
9.3
Nos.
12546.00
50184.00
NS
9.4
a) b) c) d) d)
BOQ
26
ELECTRICAL
DSR 2007/N S
NS
Amount (Rs.)
DSR items NS items
Description of item
Supply & laying of following sizes of hume pipes for road crossing, paved areas etc. including collars and misc. jointing accessories, digging the trench, back filling etc. complete in all respects. 100mm dia 150mm dia Laying of 1 No. PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 120 Sqmm but not exceeding 400 sqmm direct in ground including excavation sand cushioning, protective covering and refilling the trench etc. as required. Laying of one number additional PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 120 sqmm but not exceeding 400 sqmm direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Laying of one No. PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 Sqmm but not exceeding 400 sqmm in the existing RCC/HumeStoneware/Metal pipe as required. Supplying & fixing cable route marker with 10cm x 10cm x 5 mm thick GI plate with inscription thereon, bolted/welded to 35mm x 35mm x 6mm angle iron, 60cm long and fixing the same in ground as required. Supplying & making end termination with brass compression glands and aluminum lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium contractor cable of 1.1KV grade as required. 3.5C x 35 Sqmm 3.5C x 70 Sqmm 3.5C x 150 Sqmm 3.5C x 300 Sqmm 3.5 C x 400 Sqmm
Unit
Qty
DSR
NS
1.3
a) b) 9.6
30 20 300
7500.00 6000.00
1.6
9.7
Mtr
150
63.00
9450.00
1.8
9.8
Mtr
35
21.00
735.00
3.3 (Ext)
9.9
Each
30
157.00
4710.00
4.1
9.10
a) b) c) d) e)
4 2 6 4 4
BOQ
27
ELECTRICAL
DSR 2007/N S
2.71
Amount (Rs.)
DSR items 136.00 NS items
Description of item
Providing & fixing MV Danger Notice plate of 200mm x 150mm, made of mild steel, atleast 2mm thick, and vitreous enamelled white on both sides, and with inscription in signal RED colour on front side as required. Earthing with copper earth plate 600mm x 600mm x 3mm thick i/c. accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) etc. as required. Extra for using salt and charcoal for GI or copper plate earth electrode as required Providing and fixing 25mm x5mm copper strips in 40mm dia GI pipe from earth electrode, as required. Providing and fixing 25mm x 5mm copper strips on surface or in recess for connections etc. as required Providing and fixing of following sizes copper strips on surface or in recess for connection etc. as required 50mm x 5mm TOTAL OF SUB-HEAD -IX
Unit
Each
Qty
2
DSR
68.00
NS
3.6
9.12
Set
3263.00
13052.00
4 20 50
Mtr
20
665.00
BOQ
28
ELECTRICAL
4 5
0.00 1091458.00
1091458.00
Amount (Rs.)
DSR items NS items
Set
75167.00
75167.00
NS
1.2
Set
39702.00
39702.00
BOQ
FIRE FIGHTING
DSR 2007/ NS
NS NS
Amount (Rs.)
DSR items NS items 3044.00 3438.00 121351.00
Description of item
Supplying, testing, installation & commissioning of pressure switches for Terrace Pumps Supplying, testing, installation & commissioning of pressure guages with mini ball valve and siphon tube. TOTAL OF SUB-HEAD-I
Unit
Qty
DSR
NS
1522.00 573.00
Set Set
2 6
0.00
BOQ
FIRE FIGHTING
Amount (Rs.)
DSR items NS items
Fabricating, supplying, erection, testing and commissioning of totally enclosed cubicle type free standing, floor mounted, compartmentalised, sectionalised, dust, damp and vermin proof, with suitable natural ventilation arrangement, front and rear accessible, lockable power cum control panel, fabricated from 1.6 / 2 mm thick MS sheet ( to give IP 54 protection ) spray painted with approved colour shade, heavy 4 strip sleeved aluminium / aluminium alloy bus bar, bus bar supports, interconnecting from busbars to outgoing switches / MCCBs including earthing the board suitable to accomodate the following including numbering etc., as required: Cubical panel as described above with following: Incoming section : 100 Amps ACB, 3 pole with neutral link 25 KA, 415 V+ 1 No., Digital Voltmeter with phase selection push button = 1 No., 3 Phase indication lamps, instrument fuses and switches, 100 Amp Al. Bus bar Outgoing Section: 900 LPM Pump 50 A TP MCCB with neutral link 250 KA 415 V = 1 No. On / Off indicating Lamp = 1 set. Suitable fully automatic star delta starter for motor complete with single phase preventer relay = 1 no. Ammeter with Phase selection = 1 No. CT Ratio 250 : 5 = 3 nos 180 LPM Pump 25 A TP MCCB with neutral link 250 KA 415 V = 1 No. On / Off indicating Lamp = 1 set. Suitable fully automatic star delta starter for motor complete with single phase preventer relay = 1 no. Ammeter with Phase selection = 1 No. CT Ratio 250 : 5 = 3 nos Supplying and fixing of one number PVC insulated and PVC sheated aluminium conductor cable of 1.1 KV grade of size on surface as required complete with end terminations of aluminium lugs and brass compression glands. 16 x 3 core
Set
70467.00
70467.00
NS
2.2
NS
2.2.1
Mtr.
60
220.00
13200.00
BOQ
FIRE FIGHTING
DSR 2007/ NS
NS
Amount (Rs.)
DSR items NS items
Description of item
Providing and laying 2 x 1.5 sq mm PVC insulated and sheathed copper conductor armoured cable for connecting between Pressure Switches to Panel including fixing to walls and columns by GI saddles and steel screws, and fixing by PVC ties and straps and end terminations with aluminium lugs and brass compression glands complete as required. All supports shall be at least 0.5 M intervals. Thimbles and ferrules shall be provided at joints and terminations.
Unit
Qty
DSR
NS
Mtr. As per Electrical SOR CBTR2255 01 2.4 Fabricating and installing following sizes of perforated MS cable trays including horizontal and vertical bends, reducers, tess, cross members and other accessories as required and duly suspended from the ceiling with MS suspenders and including painting etc. as required. 225 mm width x 50 mm depth x 1.6 mm thickness TOTAL OF SUB-HEAD-II Mtr.
60
123.00
7380.00
2.4.1
40
342.00 0.00
13680.00 104727.00
BOQ
FIRE FIGHTING
DSR Description of item 2007/ Sl. No. NS SUB-HEAD-III PIPING AND ACCESSORIES (HYDRANT SYSTEM)
NS 3.1 Supplying, laying, jointing and testing of following sizes heavy grade MS pipe, flanges and fittings such as Bends, Tees, reducers, rubber insertions and galvanised nuts and bolts, "Heavy Class" confirming to IS: 1239/Part-I/1974 and Part - II /1979 i/c fixing the pipe on wall / ceiling / truss with suitable M.S strip / clamps / bracket and painting with one coat of anticorosive paint/primer and two coats of synthetic enamal paint etc. complete as reqd. Rate shall also include cost of hangers and clamps as required and including all civil breakages and making good the same. 150 mm dia 100 mm dia 80 mm dia 65 mm dia 50 mm dia Supplying and fixing single headed gun metal body hydrant valve inlet complete with 63 mm dia female instantaneous outlet of gun metal conforming to type "A" of IS:5290-1977 with rubber blank cap, steel chain, adapter as per CPWD Specification Part - V as required including 6 mm thick Stainless steel Orifice Plate of suitable size as required. (Threaded parts shall be sealed with "Holdtite"). Providing 63 mm dia 15 M long reinforced rubber lined hose pipe with external EPDM coating conforming to IS:636-1962 Part- A, with gun metal male & female coupling wire wound copper wire with the pipe. Providing short gun metal branch pipe IS marked with 20 mm outlet bore. Providing and fixing first aid hose reel full swinging type with 36 M length x 20 mm dia double rayon braided rubber pipe externally red coated with ABS plastic shut off nozzle of 6 mm dia. Hose shall be connected to the Riser through MS ( H ) 25 mm dia pipe complete with all fittings and ball valve with internal strainer. Rate shall include 25 mm dia pipe connection from riser to hose reel including all sockets, nipples, elbows and 25 mm ball valve.
Amount (Rs.)
DSR items NS items
NS NS NS NS NS NS
5 120 20 40 40
Each
6012.00
6012.00
NS
3.3
2 1
2859.00 1694.00
5718.00 1694.00
Set
22
8277.00
182094.00
BOQ
FIRE FIGHTING
DSR 2007/ NS
NS
Amount (Rs.)
DSR items NS items
Description of item
Providing & fixing weather proof standard hose cabinet ( 1.0 M x 0.45 M x 0.3 M ) outdoor type suitable for accommodating yard hydrants made of 2 mm thick MS sheet having central opening glazed door including necessary locking arrangement, powder coating with P O red paint and housing 2 Nos. RRL hose pipe, 1 No. branch pipe. The words "Hose Cabinet" to be painted on the Box. Cost of stand of 40 x 40 x 6 mm thick MS angle with PCC grouting shall also be included.
Unit
Qty
DSR
NS
Each NS Providing & fixing cast iron double flanged type IS marked sluice valve of the following size complete with bolts, nuts, washers and inserted rubber gaskets as required: 3.7.1 100 mm dia 3.7.2 80 mm dia 3.7.3 65 mm dia 3.7.4 50 mm dia 3.8 Providing & making drainage provision for the Down commer / Header with 40 mm dia ball valve as required 3.9 Providing and fixing cast iron IS marked single plate hinged gravity operated non return valve complete with bolts, nuts, washers and rubber gasket etc as required : 3.9.1 65 mm dia 3.9.2 50 mm dia 3.10 Providing and fixing of 450 mm dia x 2.0 metre high Air Vessel fabricated out of 8 mm thick MS sheet complete with dished top and bottom end, Air Release Valve, tripod type stand, Pressure Guage with ball valve, drain ball valve of 50 mm dia with 2.0 metre long GI ( H ) piping complete as required. 3.11 Providing and fixing Two Way Fire Brigade Inlet to Down Commer with Butterfly valve and dual plate spring operated wafer type non return valve complete in all respects : 3.11.1 100 mm dia NRVs and BVs for 100 mm dia Down Commer TOTAL OF SUB-HEAD-III 3.7
7441.00
7441.00
NS NS NS NS NS
6 2 1 1 5
NS NS NS
Each Each
1 1
3397.00 2730.00
3397.00 2730.00
Set
23810.00
23810.00
NS
NS
Set
10975.00 0.00
43900.00 537733.00
BOQ
FIRE FIGHTING
Amount (Rs.)
DSR items NS items
Each
10
1961.00
19610.00
NS
4.2
Each
20
3542.00
70840.00
NS
4.3
Each
40
980 0.00
39200.00 129650.00
BOQ
FIRE FIGHTING
DSR Description of item 2007/ Sl. No. NS SUB-HEAD-V FIRE ALARM SYSTEM
Providing, installing, testing and commissioning of the following complete with junction boxes complete as required. NS NS 5.1 5.2 5.3 ABS body Manual Call Box fabricated from MS sheet with 5 mm glass. Hooter cum Speaker with 4 Watt Amplifier and Line Matching Transformer. Supplying and fixing of following sizes of MS steel conduit alongwith the accessories in surface / recess including painting in case of surface conduit, or cutting the wall and making good the same in case recessed conduit as required. Exposed conduits shall be fixed by saddles with base plate after every 500mm distance. 20 mm dia Supply and drawing following sizes of PVC insulated stranded flexible copper conductor cable in the existing surface / recessed PVC / steel conduit / PVC casing and capping complete with thimble and ferrules as required. 2 x 1.0 sq mm Providing, fixing, testing and commissioning of 12 Zone Main Fire Alarm Panel complete with Zone Cards, Power Card, Rectifier, spare Relays as potential free contact, relay for actuation of hooter in respective floor, adjustable timer, sealed maintenance free batteries of 7 Ah capacity of 24 volts capable of running for a minimum of 12 hours with battery charger, LED indications for Fire / Fault Signal of individual unit, complete as per specifications. Each Floor shall have a seperate relay for actuation of sounder through tone generator and PA Panel. Panel to also include 1 x 100 Watt Amplifier with 4 Zone Selector Switch, Power & Monitor Console and Microphone complete as required. TOTAL OF SUB-HEAD-V
Amount (Rs.)
DSR items NS items
Each Each
20 20
670.00 446.00
13400.00 8920.00
NS
5.3.1 5.4
Mtr.
1200
69.00
82800.00
NS NS
Mtr.
1200
45.00
54000.00
5.5
Each
38877.00 0.00
38877.00 197997.00
BOQ
FIRE FIGHTING