Professional Documents
Culture Documents
Standard Enthalpy of Formation
Standard Enthalpy of Formation
Standard Enthalpy of Formation
http://en.wikipedia.org/wiki/Standard_enthalpy_of_formation
The standard enthalpy of formation or standard heat of formation of a compound is the change of enthalpy from the formation of 1 mole of the compound from its constituent elements, with all substances in their standard states at 101.3 kPa and 298 K. Its symbol is HfO or fHO. The superscript theta (zero) on this symbol indicates that the process has been carried out under standard conditions. Standard States are as follows: 1. For a gas: standard state is a pressure of exactly 1 atmosphere 2. For a substance present in a solution: a concentration of exactly 1 M at a pressure of 1 atm 3. For a pure substance in a condensed state (a liquid or a solid): the pure liquid or solid under a pressure of 1 atm 4. For an element: the form in which the element is most stable under 1 atm of pressure and the specified temperature. (Usually 25 degrees Celsius or 298.15 K) One exception is phosphorus: most stable under 1 atm is black phosphorus, but white phosphorus is used as the reference for zero enthalpy of formation[1] For example, the standard enthalpy of formation of carbon dioxide would be the enthalpy of the following reaction under the conditions above: C(s,graphite) + O2(g) CO2(g) Note that all elements are written in their standard states, and one mole of product is formed. This is true for all enthalpies of formation. The standard enthalpy of formation is measured in units of energy per amount of substance. Most are defined in kilojoules per mole (kJ mol1), but can also be measured in calories per mole, joules per mole or kilocalories per gram (any combination of these units conforming to the energy per mass or amount guideline). In physics the energy per particle is often expressed in electronvolts which corresponds to about 100 kJ mol1. All elements in their standard states (oxygen gas, solid carbon in the form of graphite, etc.) have a standard enthalpy of formation of zero, as there is no change involved in their formation.
Contents
1 Mechanics 2 Standard enthalpy of reaction 3 Key concepts for doing enthalpy calculations 4 Subcategories 5 Examples: Inorganic compounds (at 25C, 298 K) 6 See also 7 External links 8 References
Mechanics
1 of 5 26-Nov-13 3:23 PM
http://en.wikipedia.org/wiki/Standard_enthalpy_of_formation
The standard enthalpy of formation is equivalent to the sum of many separate processes included in the Born-Haber cycle of synthesis reactions. For example, to calculate the standard enthalpy of formation of sodium chloride, we use the following reaction: Na(s) + (1/2)Cl2(g) NaCl(s) This process is made of many separate sub-processes, each with their own enthalpies. Therefore, we must take into account: 1. 2. 3. 4. 5. The standard enthalpy of atomization of solid sodium The first ionization energy of gaseous sodium The standard enthalpy of atomization of chlorine gas The electron affinity of chlorine atoms The lattice enthalpy of sodium chloride
The sum of all these values will give the standard enthalpy of formation of sodium chloride. Additionally, applying Hesss Law shows that the sum of the individual reactions corresponding to the enthalpy change of formation for each substance in the reaction is equal to the enthalpy change of the overall reaction, regardless of the Standard enthalpy change of formation number of steps or intermediate reactions involved. This is Born-Haber diagram for lithium fluoride. because enthalpy is a state function. In the example above the standard enthalpy change of formation for sodium chloride is equal to the sum of the standard enthalpy change of formation for each of the steps involved in the process. This is especially useful for very long reactions with many intermediate steps and compounds. Chemists may use standard enthalpies of formation for a reaction that is hypothetical. For instance carbon and hydrogen will not directly react to form methane, yet the standard enthalpy of formation for methane is determined to be -74.8 kJ mol1 from using other known standard enthalpies of reaction with Hesss law. That it is negative shows that the reaction, if it were to proceed, would be exothermic; that is, it is enthalpically more stable than hydrogen gas and carbon. It is possible to predict heat of formations for simple unstrained organic compounds with the Heat of formation group additivity method.
2 of 5
26-Nov-13 3:23 PM
http://en.wikipedia.org/wiki/Standard_enthalpy_of_formation
Hr = [(1 Hf(CO )) + (2 Hf(H O))] (products) - [(1 Hf(CH )) + (2 Hf(O ))] (reactants) 2 2 4 2 If the standard enthalpy of the products is less than the standard enthalpy of the reactants, the standard enthalpy of reaction will be negative. This implies that the reaction is exothermic. The converse is also true; the standard enthalpy of reaction will be positive for an endothermic reaction.
Subcategories
Standard enthalpy of neutralization is the change in enthalpy that occurs when an acid and base undergo a neutralization reaction to form one mole of water under standard conditions, as previously defined. Standard enthalpy of sublimation, or heat of sublimation, is defined as the enthalpy required to sublime one mole of the substance under standard conditions, as previously defined. Standard enthalpy of solution (or enthalpy change of dissolution or heat of solution) is the enthalpy change associated with the dissolution of a substance in a solvent at constant pressure under standard conditions, as previously defined. Standard enthalpy of hydrogenation is defined as the enthalpy change observed when one mole of an unsaturated compound reacts with an excess of hydrogen to become fully saturated under standard conditions, as previously defined.
3 of 5
26-Nov-13 3:23 PM
http://en.wikipedia.org/wiki/Standard_enthalpy_of_formation
Sodium hydroxide Sodium nitrate Sodium nitrate Sulfur dioxide Sulfuric acid Silica Nitrogen dioxide Nitrogen monoxide Water Water Carbon dioxide(CO2) Hydrogen Fluorine Chlorine Bromine Bromine Iodine Iodine Zinc sulfate
s aq s g l s g g l g g g g g l g s g s
NaOH NaNO3 NaNO3 SO2 H2SO4 SiO2 NO2 NO H2O H2O CO2 H2 F2 Cl2 Br2 Br2 I2 I2 ZnSO4
-426.7 -446.2 -424.8 -297 -814 -911 +33.2 +91.3 -285.8 -241.82 -393.5 0 0 0 0 +31 0 +62 -980.14
See also
Thermochemistry Enthalpy Calorimetry Standard enthalpy change of formation (data table)
External links
NIST Chemistry WebBook (http://webbook.nist.gov/chemistry/)
References
[2]
4 of 5
26-Nov-13 3:23 PM
http://en.wikipedia.org/wiki/Standard_enthalpy_of_formation
lpg=PA547&dq=standard+exception+white+phosphorus+enthalpy&source=bl&ots=W76OtR_Hr3& sig=GFbrpTTGMookqRUlf2lxWsdajCQ&hl=ko&sa=X&ei=KJcnUILTN4OkiQfbkoGgBA& ved=0CGUQ6AEwCQ#v=onepage&q=standard%20exception%20white%20phosphorus%20enthalpy&f=false) 2. ^ Zumdahl, Steven (2009). Chemical Principles, Ed. 6 p. 384-387. Houghton Mifflin, Boston. New York. ISBN 978-0-547-19626-8.
Retrieved from "http://en.wikipedia.org/w/index.php?title=Standard_enthalpy_of_formation& oldid=580981391" Categories: Enthalpy Thermochemistry This page was last modified on 10 November 2013 at 01:46. Text is available under the Creative Commons Attribution-ShareAlike License; additional terms may apply. By using this site, you agree to the Terms of Use and Privacy Policy. Wikipedia is a registered trademark of the Wikimedia Foundation, Inc., a non-profit organization.
5 of 5
26-Nov-13 3:23 PM