Professional Documents
Culture Documents
Manual Ace Elite Pro
Manual Ace Elite Pro
Training Modules
PN 722277 Rev. BB (November 2010) Beckman Coulter, Inc. Miami Education Center Miami Lakes, FL 33014
* ACL Elite, HemosIL, and AccuTrak are registered Trademarks of Instrumentation Laboratories
ii of vi
Keep doors, covers and panels closed and secured in place while the instrument is in use. Take full advantage of the safety features of the instrument. Do not defeat safety interlocks and sensors. Acknowledge and act upon instrument alarms and error messages. Keep away from moving parts. Report any broken parts to your Beckman Coulter Representative. Open/remove and close/replace doors, covers and panels with care. Use the proper tools for troubleshooting.
CAUTION: System integrity might be compromised and operational failures might occur if: This equipment is used in a manner other than specified. Operate the instrument as instructed in the Product Manuals. You introduce software that is not authorized by Beckman Coulter into your computer. Only operate your systems computer with software authorized by Beckman Coulter. You install software that is not an original copyrighted version. Only use software that is an original copyrighted version to prevent virus contamination.
IMPORTANT If you purchased this product from anyone other than Beckman Coulter or an authorized Beckman Coulter distributor, and, if it is not presently under a Beckman Coulter service maintenance agreement, Beckman Coulter cannot guarantee that the product is fitted with the most current mandatory engineering revisions or that you will receive the most current information bulletins concerning the product. If you purchased this product from a third party and would like further information concerning this topic, call your Beckman Coulter Representative.
iii of vi
PN 626394A (December 2003)
iv of vi
REVISION STATUS
Revision A Revision B Revision BA Revision BB December 2005 August 2006 August 2009 Software release 3.0.5, Library 1.15 November 2010 Software release 3.01.04, Library 02.00.00
v of vi
vi of vi
COURSE GUIDE
TABLE OF CONTENTS
Group Discussions....5
Reminders.....5
Page 1of 8
Page 2 of 8
COURSE MAP
IL ACL ELITE/ELITE PRO SYSTEM TRAINING
T
Training
MS
Mixing Studies
SSA
Setup Security Access
AT
AccuTrak
NL
New Lot
CT Copy Test
CCI
Clot Curve Interpretation
UT
Utility
HEP
Heparin Assay
REQUIRED TOPICS ES
Enable
LD
Liquid Definition
TS
Troubleshooting
INR
Setup
DD SS
Setup
MLT
Multi-Test Setup
D-Dimer
RT SA3
Reflex Testing
SA2
Sample Analysis
SQC
Setting up QC
Sample Analysis
RR
Replace Rotors
SA1
Sample Analysis
RQC2 M
Maintenance Running QC
RWE
Replace Wash R Emulsion
RQC1
Running QC
CAL
Calibration R-PT Fib RecombiPlasTin & Clauss Fibrinogen
IB
Instrument Basics
RI
Reagent Insert
PREREQUISITE TOPICS
PR
Prerequisite
PN 722277BB (November 2010) Miami Education Center
Page 3 of 8
Date Achieved
Sign-Off
Apps
___________
_______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______ _______
_____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____ _____
Required Topics
___________ ___________ Instrument Basics ___________ Running Quality Control ___________ Sample Analysis 1 ___________ Sample Analysis 2 ___________ System Setup ___________ Enable/Disable Liquid Definition ___________ ___________ Multi-Test Setup ___________ Setup Quality Control ___________ Maintenance Calibrate: R-PT, R-FIB_ FIB-C ___________ ___________ Running Quality Control Sample Analysis 3 ___________ ___________ D-Dimer ___________ Troubleshooting ___________ Replace Wash R Emulsion ___________ Replace Rotor ___________ Reflex Testing ___________ INR Setup
Elective Topics
CT FA ** UT MS SSA CCI AT NL Copy Test Factor Assay Utility Mixing Studies Setup Security Access Clot Curve Interpretation AccuTrak New Lot HEP ** Heparin Assay
Advanced Topics
T Training
___________
_______
_____
Page 4 of 8
GROUP DISCUSSIONS
The following discussions take place in the discussion room (except for the time in the Customer Cafe).
Monday
Customer Cafe General Education Center Information Learn about classmates Safety: Personal Protective Equipment and Fire Evacuation Introduction to the course and materials Location of additional reference materials
Tuesday
Discussion: Software overview
Wednesday
Discussion: Clot Curve Presentation
Thursday
Last Day Course Evaluations Graduation
REMINDERS